Help with autonumbering chapters

Hi there,
I'm a relative newbie to FrameMaker, as I don't use it very often, so please forgive me if this is a silly problem. I've inherited a FrameMaker manual from the person who had my job previously, and for the first time in three years I've had to add new chapters to the project. I upgraded from 7.2 to 9 recently. However, I am unable to get the new chapter autonumbers correct. From what I could gather from FrameMaker help, I seem to have these options set up correctly:
Chapter Numbering Properties: For example, the first chapter I added is set as chapter # 21, and the Continue Numbering From Previous Chapter in Book option is selected.
In the Paragraph Designer, the chapter.number format (which is used to display the chapter number on the title page of each chapter) has a formula for C:<n+>, exactly the same as the other chapters that have correct numbering.
I've checked the options in the Customize Text Frame box, and the Flow appears to be correct (Tag is A, and Autoconnect is selected). Again, these settings are the exact same in the previous chapters.
Despite all this, every new chapter I added is showing up as Chapter 1 on the title page and in the running footer, and I cannot figure out what I'm doing wrong. I'm trying to get this manual finished up before I go on vacation Friday and this is my last hurdle, so any help is greatly appreciated.
Thanks in advance!

Van is quite correct when he says:
"If you want to update the numbering system and handle the chapter numbering as chapter numbers, then in the paragraph designer for the chapter title format, replace the C:<n+> with <$chapnum> You have to do this for each chapter file; the easy way is to do it one file and then import the paragraph format into the other files; with the fixed file open, select the other files in the book file, select File > Import > Formats, select only the paragraph formats."
But I'd make the recommendation much stronger. The old style numbering you inherited went away about version 6, and I suspect the <$chapnum> variable is used internally now in a number of ways. If it doesn't exist / isn't set up properly, you're going to have other problems down the road when you invoke things that use it.
The second step in converting to this system is setting up your book file to interact with the updated tag. You need to highlight the first numbered chapter in the book file, right-click, select Numbering > Chapters and set the first chapter to 1. Apply and save.
Then highlight all numbered chapters _except_ the first one, right click, and set those chapter numbering properties to Continue from previous...
Then save and update the book.
Art

Similar Messages

Need Help with AutoNumbering for Section Heads--Stat!!

Howdy--
Okay, I'm trying to set up section numbering using autonumbering. I want the Heading1's of my document to have section numbers whose look like:
<$chapnum>.1, 2, 3, etc.
For example, 2.1, 2.2, 2.3, etc..
where the first number is the chapter number and the second number is increments with each new heading.
OK Then, so...
the Numbering tab in the Paragraph Designer for my Heading1 tag is:
<$chapnum>.<n+>\t
This works on the first two Heading1's in the document but when I get to the third Heading1, the second number won't increment. For example, it stays 2.2, when it should be 2.3.
What am I missing here?
Thanks,
Marie

Pending an authoritative answer from Art, I see that your heading 2 definition has three counters while your heading 1 definition only has two. Adding a third counter to the heading 1 definition will let you reset the value of this third element each time you have a heading 1.
S:<$chapnum>.<n+>< =0>\tHeading 1 1.1 First level 1 heading
S:<$chapnum>.<n>.<n+>\tHeading 2 1.1.1 Level 2 heading
S:<$chapnum>.<n>.<n+>\tHeading 2 1.1.2 Level 2 heading
S:<$chapnum>.<n+>< =0>\tHeading 1 1.2 Second level 1 heading
S:<$chapnum>.<n>.<n+>\tHeading 2 1.2.1 Level 2 heading
S:<$chapnum>.<n>.<n+>\tHeading 2 1.2.2 Level 2 heading
To set numbering properties, select the second and all following chapters in the .book; right-click and select Numbering from the context menu; set Chapter number to "Continue numbering from ..."; update the book, to be on the safe side.
btw, it took me a while to find it but there _is_ an Adobe manual for FrameMaker 8: open an ordinary .fm file, then select Help > Complete FrameMaker Help. I've downloaded the .pdf; with the LiveDocs interface, you'll find information about autonumbering under FrameMaker basics / Text formatting
HTH

Need help with adding chapters

I like iMovie '08 for the quickness of scanning the video, however I'm hoping someone can explain the steps of exporting and adding chapters in garage band and then exporting that to iDVD. My ultimate goal is to create a dvd from my video footage and the dvd have scene selections. Also, will this cause quality loss (exporting/importing back and forth between programs). If there's another way to add chapters instead of in garage band, please let me know. Thanks.

1) First, create your movie in iMovie. Then Share it using Share to iTunes, Share to Media Browser, etc.
2) Now, Open GarageBand.
3) Select "Create a new music project" (not "create a new podcast episode")
4) Give your project a name and click "Create" (The time signature and all that stuff does not matter)
5) You might see a grand piano keyboard. Click the red dot at the upper left corner of the keyboard to get rid if it.
6) Now, at the bottom right corner of GarageBand, you should see a button for the Media Browser. Click it, and you should be able to find your movie.
7) Drag your movie from the Media Browser to the main garageband area where it says "Drag Apple Loops here". It will create a video track with thumbnails for skimming and an audio track.
8) At this point, you will also see a "Grand Piano Track" which is a default. You can delete it by selecting the Grand Piano track, and then clicking in the menus TRACK/DELETE.
Now, the only tracks remaining are your movie.
9) Select your Movie Track and you will see the pane below where you enter Chapter names. In GarageBand terms these are Markers.
10) Move the GarageBand playhead to the point in your movie where you want the first chapter. Click Add Marker. Your Chapter will have a default name of "Chapter 1" but you can click on it and change it. Make sure there is a checkmark by "marks a chapter" (not "marks a URL")
11) Repeat step 10 until you have all your chapters.
12) Now, click SHARE/SEND MOVIE TO iDVD, or SHARE/SEND MOVIE TO iTUNES, etc. depending on whether you are creating this for a DVD or for an iPod.
You are done.

Need help with Autonumber Format

We are using unstructured FrameMaker 12 on a Windows 7 platform (64 bit).
We need to number questions in an FAQs section, that includes the "Q" in bold followed by a colon that is not in bold.
This is what the new paragraph style needs to do:
1.[tab][bold]Q[Default ¶ Font]:[tab]What happens when XYZ?
[tab][bold]A[Default ¶ Font]:[tab]This is what happens.
We would like for the number and "Q:" to appear automatically and be formatted correctly with the new paragraph style, so all we have to do is type the question. (We would prefer not to use "Q##:" because it would require a unique indentation distance in the template.)
The "A:" should also be indented and formatted correctly.
Both the "Q:" and the "A:" would wrap around to the same indentation for long text strings.
Can anyone provide the "building blocks" that can make this happen? Is this possible?
I tried to search for the answer in this forum and on the Web. I apologize if this is answered somewhere already.
Thanks in advance.
Tim

This is certainly possible! assuming I've understood the question correctly, of course …
All you need is a pair of paragraph formats, one for the questions and one for the answers, and a character format for the labels. Set the paragraph properties so that the numbering can be outdented, and set the numbering properties to add Q (or A, depending) followed by a sequence indicator and a tab. Here's a screenshot of how I'd do it for the questions.
And here's a bit more explanation of how the Autonumber format works its magic …
the Q: at the very start is the series label, and the colon is an essential part of the definition. By including a series label, you can set up different series; for example to number tables and figures separately.
after the series label, Q {space} is the text that will be included before the counter; <n+> is the building block for a numeric counter that will increment by 1; the full stop after the building block is another piece of text, and \t is a tab character.
the character format identifies a, well, character format that is applied to anything generated by the autonumbering; the format I've used just happens to be set to light grey.
This already gives an idea of how elegant FM numbering can be. Icing on the cake in this case is that thanks to the series label you can also display the current value of the counter for the answer. The autonumber format I've used for answers is Q:A <n>.\t
the Q: is the same series label
A{space} is the text, and <n> is the building block for 'current value of counter identified by this series label'
If your document simply alternates single-paragraph questions and single-paragraph answers, you can save yourself time by using the Next Paragraph Tag option to follow questions by answers and vice versa. You'll be amazed by how quickly you'll have your Q&A ready :-}

Need some URGENT help with 3 DVD mastering issues PLEASE! :

Hi there,
Firstly, I am running DVD SP 3.0.2 on Mac OS 10.4.7 on a G5 Dual 2 GHz 3Gb Ram plenty of HD space...
I am creating a DVD with: An intro sequence, a main menu, 4 sub menus, and 4 sections with around 12 chapters each.
I am having some big problems, and a pretty stuck. I will lest them separately below, numbered. If you are able to help, please refer clearly to which number you are helping with. Any help is MUCH appreciated! Many thanks!!
1. Each of the 5 menus (1 main, 4 sub) have a background video, and a separate audio track. I added the background videos by simply dragging them to the assests panel, then from there onto the menu editor window. They are created in FCP and are properly encoded. However, when I click the motion button, or use the simulator, the videos do not show up. The music plays, but all i see is plain black.
What is going on?!?!?!
2. I am really struggling with rollover buttons. I have custom created buttons, and I wand them to have a soft red glow around them when hovered over. HOW ON EARTH DO I ACTUALLY DO THIS??
The buttons are in photoshop so can be exported with/without background/glow in any format.
3. Is it possible, once I have got the above rollover working, to have an image to the right hand side of my buttons which changes with the the button rollover. i.e. hover over button 1, see image 1. hover over button 2, image changes to image 2.
PLEASE PLEASE give any help you can, I have a deadline coming up and am quite stumped. Thanks again!!

I am still having problems regarding issue Number 1. PLEASE ANYONE HELP?!
Sorry, I'm not sure about the motion menus. I avoid those whenever possible. But you might click on the menu in the storyline tab (whatever it's called -- the hierarchical view with the disc, tracks, slideshows, etc.) and look at the properties and see if there's anything you have to enable specifically for motion. And be sure the motion button is on on the main display/preview area, but it sounds like you already know how that works.
For your information, here is a screen grab of the menu I am trying to create:
http://www.redhavoc.co.uk/stuff/menu.jpg
I think it is obvious that when a button is hovered over, I want it to glow red, and the image to the right will change to match the respective button.
IS THIS GOING TO BE POSSIBLE????
Yes.
First, your menus have to be layered menus. Unfortunately, there's no way to convert non-layered menus to layered menus, so if you already have non-layered, you'll have to just delete them and create new layered menus. The button (and menu item) to create a layered menu should be right by the normal new-menu item.
Next, the graphical work is all in Photoshop.
Side tip: You may already know this, but I found it's best to use 640x480 for the Photoshop document. When I do text and leave it as a text object in the Photoshop file, it resizes poorly in DVDSP. So this ends up being another 720x480 vs. 640x480 square/rectangular pixel conversion thing. DVDSP plays in the 640x480 world, at least as far as the designer can see. So I keep my images at 640x480, and it doesn't have to resize, and everything looks right.
Moving on... Set up your basic background, the part that won't change (or will have other things covering it, like for your square image).
Then put in all the buttons and images you'll be using, each part in a separate layer. This could have fifteen buttons (you have five buttons, and there can be three versions for each -- inactive, selected, and activated versions) and five or six square images (you said one for each button, and you might want a blank default if, say, you want to add a "back" button on the menu and want some blank or default image for the square when they're on the "back" button).
Sometimes people don't bother with a separate "active" button state, but you usually want some visual feedback that they clicked the button. Also, I usually just build the default (unselected) button into the background; that's less hassle later on, and it will just draw the selected or activated buttons over that when the user is on that button.
Line up all your buttons and images. All the square images lined up perfectly on top of each other, all the buttons in the right places (so you'll have three buttons stacked on top of each other in each spot). Give each layer a short but quickly recognizable name, and line them up in a consistent order. (button1-default, button1-selected, button1-active, button1-squarepicture, then button2-default, ... etc.) Photoshop and DVDSP don't care, but it makes it easier for you later.
Note that earlier versions of DVDSP won't show Photoshop layer effects. (They handle layers, just not the effects, like inner glow, outer bezel, etc.) I don't remember when they changed this, but I think it was version 4.something. So if you're using that method to make your buttons glow, you may have to flatten each selected or active button layer, and you may even need to create a dummy blank layer underneath it first to give it something to flatten onto.
Save the file as a standard Photoshop file (.psd). Drag the file onto your DVDSP layered menu and set it as the background.
Now, in DVDSP, create all your buttons. Just drag boxes over/around the button pictures you have. Feel free to make them extra-big; users won't see the actual area you've selected, and bigger areas makes it easier for people to hit them if they're using a mouse on a computer to watch the DVD. You can point the buttons to their targets now if you want, and set the end jumps on the tracks if you want. (I tend to set the end jumps on the tracks so they automatically select the button for the next track.)
Now's the fun part, since it will actually hook everything up and should be easy if your naming layer order were consistent. Click on the layered menu (in that hierarchical view) and look at the properties window. (Sorry I can't remember the technical names for all these windows; I'm doing this all from memory. So feel free to ask more questions if you can't find what I'm talking about.) One of the properties tabs should have a grid of checkboxes with a list of your layers. Make sure the background is checked for all of the states. Then check the layers you want to show for each button state, as well as the corresponding square image to show for each.
Again, I'm doing this from memory, and I can't remember exactly how things are listed in that grid. But I remember it keeps your layers in the same order you put them in the Photoshop file and shows you those names, so it should make it easy to go down the list and check the right boxes.
And another side tip: You can update the Photoshop file, but once you've put it in DVDSP, if you change the layer order, it will screw up the check boxes you checked. It always shows you the layer names correctly, but it keeps the checkboxes in DVDSP simply assigned to the layer number, so the fifth layer will keep the same checkboxes even if you juggle them so some other layer is now the fifth layer. So if you do juggle the layers in Photoshop, go back and fix the checkbox list in DVDSP.
I put a sample Photoshop file based on yours in
http://dan.black.org/layered-menu-sample.psd
It's quick and dirty, but shows the layer layout, and you should be able to drop it on DVDSP to play with. (I also won't leave it there forever, maybe a few weeks, so anybody reading this in a month or more probably will get a 404 for that url.)
Again, doing this from memory, so feel free to ask if anything doesn't work or doesn't make sense.
G4/dual867 Mac OS X (10.4.5) 2GB/0.8TB

Help with page numbering.

Hello. I've searched HIGH and LOW for answers on this. I've gone through the KB documents and the User's manual and NOTHING is helping with my challenge.
I'm writing a manuscript. I need PAGE 1 to start several pages into the document and automatically repeat in a header on each page. How do I accomplish that? I've tried with Inspector but the minute I click into the header it "grays-out" the inspector control for pagination.
I also have numerous SEPARATE Pages documents (chapters) that I want to recognize the numbering from the chapter before. How do I accomplish that?
I'm very frustrated, and you would truly be a hero to me by helping answer my questions. Thanks so much, Dan

You need to break the document into sections in the +Inspector > Layout (2nd tab) > Section+.
The First section would be your preface possibly counting in roman numerals.
The second section would start your count at page 1.
To edit the header if it is not selectable go +Menu > Format > Advanced > Make Master Objects Selectable+
Click into the header then go +Menu > Insert > Page Number+
To control the numbering go +Inspector > Layout (2nd tab) > Section > Start at+
If you can't insert into a Header it may be because it is has been locked or grouped
Both of these can be undone in +Menu > Arrange > Unlock or Ungroup+
You will have to set the starting number in separate documents manually. Remember right hand pages are always odd, if need be add a blank page at the end of a previous document.

Help with Hyperlinks...

I've created two books with multiple chapters. Both books are the same with the exception that one book is in full color for publication to the web, with the second being black/white for printing. All of the hyperlinks that I created in the black/white version are correct. When I created the color version of the publication that has the exact same hyperlinks, that's where I'm getting the problem. I guess my question is, can I "import" the hyperlinks from the black and white publication into the color publication? Any help would be appreciated...
~Vince

Did you take the b/w file and just add colour? I'm not entirely sure why the hyperlinks would go missing. (If the document was created for print, are the hyperlinks present as interactive elements?) Is there a reason to build the colour version from scratch?
If you are in CS4 you could try using conditional text and placing the black and white images and colour images on a different layer. to keep your b/w and colour version in the same file. Thus eliminating the need to import hyperlinks.
Someone on here is bound to have a better method, but I discovered that exporting all stories to a folder I could drag the text files to an unused master page and the greyed out links would show up in the hyperlinks panel. I don't think I'd opt for that route though.

Help with if statement in cursor and for loop to get output

I have the following cursor and and want to use if else statement to get the output. The cursor is working fine. What i need help with is how to use and if else statement to only get the folderrsn that have not been updated in the last 30 days. If you look at the talbe below my select statement is showing folderrs 291631 was updated only 4 days ago and folderrsn 322160 was also updated 4 days ago.
I do not want these two to appear in my result set. So i need to use if else so that my result only shows all folderrsn that havenot been updated in the last 30 days.
Here is my cursor:
/*Cursor for Email procedure. It is working Shows userid and the string
You need to update these folders*/
DECLARE
a_user varchar2(200) := null;
v_assigneduser varchar2(20);
v_folderrsn varchar2(200);
v_emailaddress varchar2(60);
v_subject varchar2(200);
Cursor c IS
SELECT assigneduser, vu.emailaddress, f.folderrsn, trunc(f.indate) AS "IN DATE",
MAX (trunc(fpa.attemptdate)) AS "LAST UPDATE",
trunc(sysdate) - MAX (trunc(fpa.attemptdate)) AS "DAYS PAST"
--MAX (TRUNC (fpa.attemptdate)) - TRUNC (f.indate) AS "NUMBER OF DAYS"
FROM folder f, folderprocess fp, validuser vu, folderprocessattempt fpa
WHERE f.foldertype = 'HJ'
AND f.statuscode NOT IN (20, 40)
AND f.folderrsn = fp.folderrsn
AND fp.processrsn = fpa.processrsn
AND vu.userid = fp.assigneduser
AND vu.statuscode = 1
GROUP BY assigneduser, vu.emailaddress, f.folderrsn, f.indate
ORDER BY fp.assigneduser;
BEGIN
FOR c1 IN c LOOP
IF (c1.assigneduser = v_assigneduser) THEN
dbms_output.put_line(' ' || c1.folderrsn);
else
dbms_output.put(c1.assigneduser ||': ' || 'Overdue Folders:You need to update these folders: Folderrsn: '||c1.folderrsn);
END IF;
a_user := c1.assigneduser;
v_assigneduser := c1.assigneduser;
v_folderrsn := c1.folderrsn;
v_emailaddress := c1.emailaddress;
v_subject := 'Subject: Project for';
END LOOP;
END;
The reason I have included the folowing table is that I want you to see the output from the select statement. that way you can help me do the if statement in the above cursor so that the result will look like this:
emailaddress
Subject: 'Project for ' || V_email || 'not updated in the last 30 days'
v_folderrsn
v_folderrsn
etc
[email protected]......
Subject: 'Project for: ' Jim...'not updated in the last 30 days'
284087
292709
[email protected].....
Subject: 'Project for: ' Kim...'not updated in the last 30 days'
185083
190121
190132
190133
190159
190237
284109
286647
294631
322922
[email protected]....
Subject: 'Project for: Joe...'not updated in the last 30 days'
183332
183336
[email protected]......
Subject: 'Project for: Sam...'not updated in the last 30 days'
183876
183877
183879
183880
183881
183882
183883
183884
183886
183887
183888
This table is to shwo you the select statement output. I want to eliminnate the two days that that are less than 30 days since the last update in the last column.
Assigneduser....Email.........Folderrsn...........indate.............maxattemptdate...days past since last update
JIM.........      jim@ aol.com.... 284087.............     9/28/2006.......10/5/2006...........690
JIM.........      jim@ aol.com.... 292709.............     3/20/2007.......3/28/2007............516
KIM.........      kim@ aol.com.... 185083.............     8/31/2004.......2/9/2006.............     928
KIM...........kim@ aol.com.... 190121.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190132.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190133.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190159.............     2/13/2006.......2/14/2006............923
KIM...........kim@ aol.com.... 190237.............     2/23/2006.......2/23/2006............914
KIM...........kim@ aol.com.... 284109.............     9/28/2006.......9/28/2006............697
KIM...........kim@ aol.com.... 286647.............     11/7/2006.......12/5/2006............629
KIM...........kim@ aol.com.... 294631.............     4/2/2007.........3/4/2008.............174
KIM...........kim@ aol.com.... 322922.............     7/29/2008.......7/29/2008............27
JOE...........joe@ aol.com.... 183332.............     1/28/2004.......4/23/2004............1585
JOE...........joe@ aol.com.... 183336.............     1/28/2004.......3/9/2004.............1630
SAM...........sam@ aol.com....183876.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183877.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183879.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183880.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183881.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183882.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183883.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183884.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183886.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183887.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183888.............3/5/2004.........3/8/2004............     1631
PAT...........pat@ aol.com.....291630.............2/23/2007.......7/8/2008............     48
PAT...........pat@ aol.com.....313990.............2/27/2008.......7/28/2008............28
NED...........ned@ aol.com.....190681.............4/4/2006........8/10/2006............746
NED...........ned@ aol.com......95467.............6/14/2006.......11/6/2006............658
NED...........ned@ aol.com......286688.............11/8/2006.......10/3/2007............327
NED...........ned@ aol.com.....291631.............2/23/2007.......8/21/2008............4
NED...........ned@ aol.com.....292111.............3/7/2007.........2/26/2008............181
NED...........ned@ aol.com.....292410.............3/15/2007.......7/22/2008............34
NED...........ned@ aol.com.....299410.............6/27/2007.......2/27/2008............180
NED...........ned@ aol.com.....303790.............9/19/2007.......9/19/2007............341
NED...........ned@ aol.com.....304268.............9/24/2007.......3/3/2008............     175
NED...........ned@ aol.com.....308228.............12/6/2007.......12/6/2007............263
NED...........ned@ aol.com.....316689.............3/19/2008.......3/19/2008............159
NED...........ned@ aol.com.....316789.............3/20/2008.......3/20/2008............158
NED...........ned@ aol.com.....317528.............3/25/2008.......3/25/2008............153
NED...........ned@ aol.com.....321476.............6/4/2008.........6/17/2008............69
NED...........ned@ aol.com.....322160.............7/3/2008.........8/21/2008............4
MOE...........moe@ aol.com.....184169.............4/5/2004.......12/5/2006............629
[email protected]/27/2004.......3/8/2004............1631
How do I incorporate a if else statement in the above cursor so the two days less than 30 days since last update are not returned. I do not want to send email if the project have been updated within the last 30 days.
Edited by: user4653174 on Aug 25, 2008 2:40 PM

analytical functions: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/functions2a.htm#81409
CASE
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/02_funds.htm#36899
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/04_struc.htm#5997
Incorporating either of these into your query should assist you in returning the desired results.

I need help with Sunbird Calendar, how can I transfer it from one computer to the other and to my iphone?

I installed Sunbird in one computer and my calendar has all my infos, events, and task that i would like to see on another computer that i just downloaded Sunbird into. Also, is it possible I can access Sunbird on my iphone?
Thank you in advance,

Try the forum here - http://forums.mozillazine.org/viewforum.php?f=46 - for help with Sunbird, this forum is for Firefox support.

Hoping for some help with a very frustrating issue! I have been syncing my iPhone 5s and Outlook 2007 calendar and contacts with iCloud on my PC running Vista. All was well until the events I entered on the phone were showing up in Outlook, but not

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

Help with HP Laser Printer 1200se

HP Support Line,
Really need your assistance. I have tried both contacting HP by phone (told they no longer support our printer via phone help), the tech told me that I needed to contact HP by e-mail for assistance. I then sent an e-mail for assistance and got that reply today, the reply is as follows "Randall, unfortunately, HP does not offer support via e-mail for your product. However many resources are available on the HP web site that may provide the answer to your inquiry. Support is also available via telephone. A list of technical support numbers can be round at the following URL........." The phone numbers listed are the ones I called and the ones that told me I needed to contact the e-mail support for help.
So here I am looking for your help with my issue.
We just bought a new HP Pavillion Slimline Desk Top PC (as our 6 year old HP Pavillion PC died on us). We have 2 HP printers, one (an all-in-one type printer, used maily for copying and printing color, when needed) is connected and it is working fine with the exception of the scanning option (not supported by Windows 7). However we use our Laser Printer for all of our regular prining needs. This is the HP LaserPrinter 1200se, which is about 6 years old but works really well. For this printer we currently only have a parallel connection type cord and there is not a parallel port on the Slimline HP PC. The printer also has the option to connedt a USB cable (we do not currently have this type of cable).
We posed the following two questions:
1. Is the Laser Jet 1200se compatible with Windows 7?
and if this is the case
2. Can we purchase either a) a USC connection cord (generic or do we need a printer specific cord)? or b) is there there a printer cable converter adapater to attach to our parallel cable to convert to a USB connection?
We do not want to purchase the USB cable if Windows 7 will not accept the connection, or if doing this will harm the PC.
We really would appreciate any assitance that you might give us.
Thank you,
Randy and Leslie Gibson

Sorry, both cannot be enabled by design. That said, devices on a network do not care how others are connected. You can print from a wireless connection to a wired (Ethernet) printer and v/v.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Going to Australia and need help with Power converters

Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.

godzillafan868 wrote:
Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.
Check the specs on input voltage/frequency of your power supplies.
Many laptop power supplies are "universal/global" and are specced something like 80-265 volts AC 50/60 Hz, but not all. These will just need a connector adapter.
Unsure about the PS3 Slim - if it isn't universal it could be difficult as you'll need a 110/220 transformer, one big enough (power-handling wise) for the PS3 will be very bulky.
For the external WD HDD, if it doesn't have a universal supply, you're probably best off just finding a new wallwart for it that is capable of running on 220/50.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Creation of context sensitive help with pure FM 12 usage doesn't work

Hi,
I hope somebody is able to help me with a good hint or tip.
I am trying to create a context-sensitive Microsoft Help with FM12 only using the abilities of FM (no RoboHelp). For some reasons, my assigned ID's are not used in the generated chm file and therefore the help does not work context-sensitively.
What did I do?
- I created my FM files and assigned topic aliases to the headers. I did this two ways: a) using the "Special" menue and assigning a CSH marker and/or b) setting a new marker of type "Topic Alias" and typing the ID. I used only numeric IDs like "2000" or "4200",
- I created a .h file (projectname.h) - based on the format of the file projectname_!Generated!.h (I read this in some instructions). So the .h file (text file) looks like this:
#define 2000 2000 /* 4 Anwendungsoberfläche */
#define 2022 2022 /* 4.1.1 Menü Datei */
#define 2030 2030 /* 4.1.3 Menü Parametersatz */
#define 2180 2180 /* 6.6.7 Objektdialog Q-Regler */
#define 2354 2354 /* 6.9.2 Objektdialog Extran Parameter */
#define 2560 2560 /* 6.9.5 Objektdialog Extran2D Parametersatz */
- I published the Microsoft HTML Help. A projectname_!Generated!.h has been created. My IDs were not used in this file:
#define 2000    1
#define 2022    2
#define 2030    3
#define 2180    4
#define 2354    5
#define 2560    6
- When I open the .chm file and look in the source code, the ID even is totally different. It is not the one, I assigned in FM, it is not the one which I assigned in the projectname.h file and it even is not the one, which was put in the projectname_!Generated!.h file. It is a generated name starting with CSH_1 ...n in a consecutive way numbered.
Example:
<p class="FM_Heading1"><a name="XREF_72066_13_Glossar"></a>Gloss<a name="CSH_1"></a>ar</p>
What goes wrong? Why does FM not take my assigned IDs? I need to use these IDs since our programmers are using those already - I had to re-create the whole online help but the programs stay untouched.
Please help!
Many thanks
Mohi

Hi Jeff,
thanks for your note!
The text in my marker is just a number like "2000" or "4200". As said, I created manually a my.h file and used this marker there. E.g.
#define 2000 2000.
Whereby the first 2000 (in my opinion) is the marker text and the second 2000 is the context ID which the programmers are using for the context sensitive call of the help. My definitions in the my.h file were translated to #define 2000 1 (in the my_!Generated!.h file). The source code "translates" the context ID into CSH_8.
I am still confused :-/
Thanks
Mohi

Need help with Boot Camp and Win 7

I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp. I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1. That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
Thanks.
Mike

Mike,
I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
https://discussions.apple.com/community/windows_software/boot_camp
Roger

Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge

can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw shows message that Adobe camera raw plugin cannot be found

That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
If you have that file there, try to download the updated camera raw plugin from the below location.
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
In case you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
[Moving the discussion to Photoshop General Discussions Forum]

Help with autonumbering chapters

Similar Messages

Maybe you are looking for