Help with backup issues on ITunes IPhone

I recently updated to iOS7 however before this i did the following:
1. i used a new ITunes on my laptop so i plugged my phone in a made 4 backup copies before restoring my IPhone
2. I restored my IPhone fine and updated to iOS7 in the process once restored
3. I went through the steps on setting up iOS7 and got the the 'Restore from backup section' - I selected restore from backup and it started retoring from my last backup with all my apps/Contacts etc, It said it would take 16 minutes to fully sync it all back
4. However during this process my laptop decided to restart therefor stopping the backup sync
5. I reopen my Itunes and my IPhone is available on my ITunes, i select 'Restore from backup' but it only shows a backup from 23:45 which is the time staright after my laptop restarted
6. It doesnt show any backups previousl to this in my ITunes backups folders for some reason - I have lost everything from my Phone and i cant seem to see the previous backups - They MUST be somewhere as i backed up 4 times prior to this but only 3 backups are being displayed all labelled as 23:45, 23:45 and 23:46..
7. Im not sure what happened to all my data and information and where its gone to
CAN ANYONE HELP WITH THIS?

Yes--thank you! For some reason, it wasn't configured properly. Looks like problem is solved.

Similar Messages

Updated 3GS to new operating system and a week later all music and ringtones disappeared and will not let me put them back on phone. Can anyone help with this issue?

Can some one help with these issues? Thanks.

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

HT1365 Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

The figures you mention only make sense on your intranet. Are you still using the same wireless router. The verizon one is somewhat limited as far as max wireless-n performace. For one thing it only has a 2.4 radio. I like many people who wanted wireless-n performance before they even added a wireless-n gigabit router, have my own handling my wireless-n network.

Since updating to FF 8 I can no longer use Multirow book marks, can anyone help with this issue?

Since updating to FF 8 I can no longer use Multi-row book marks, can anyone help with this issue? the one I used is here http://multirowbookmarkstoolbar.com/

Try the support site:
*http://multirowbookmarkstoolbar.com/forum
*Multirow Bookmarks Toolbar Plus: https://addons.mozilla.org/firefox/addon/multirow-bookmarks-toolbarplus/

Re: Firefox no longer works with Mac OS X 10.5, will upgrading to Lion, OS X 10.7, help with this issue?

I cannot upgrade my Mac to Mountain Lion, OS X 10.8 and cannot buy a new Mac so will upgrading from
OS X 10.5 to OS X 10.7 help with this issue?

If you are going tob e upgrading to 10.7 you should be able to just upgrade, and then install future updates of Firefox with no problem.

Can anyone help with this issue.... intermittent sound from apple tv

Can anyone help with this issue?..watched the trailer of a movie with sound, then downloaded and went to watch it, but no sound and this message was displayed:"an incompatible audio signal has ben received.check the output device" tv is a sharp aquos

I don't know if this will help but have you tried switching the audio output to 16-bit? On the AppleTV, click Settings, Audio & Video, Audio Output. The two choices are "auto" and "16-bit". Good luck!

Is there a phone number I can call to talk to a live person about help with Lightroom issues ?

Is there a phone number I can call to talk to a live person about help with Lightroom issues ?

well the reason I wanted to talk to someone live because it would take forever to explain everything on here But anyway, here goes. I have an HP Pavilion Notebook with Intel Core i5-323om CPU @2.60 GHz and 8 gb ram 64bit. I am trying to run Lightroom 5.7 on my laptop and having major issues. I use an external hard drive for the storage of my photos. When I try to use Lightroom I run into many issues: Flickering of the screen, freezing up, slow, the loading circle just goes round and round lol. If I go to the washroom or leave the computer for even a minute it freezes up. I have to keep pressing Ctr/alt/delete to bring it back when it flickers. I have to constantly exit out of the program and restart it to be able to edit even just a couple of photos and then it starts acting up again.
I have tried un-installing and re-installing, updating everything on my pc, changing compatibility settings, updating development settings, I even took the laptop into have it looked at and they did all kinds of updates etc...and still couldn't figure out why it wasn't working for me. I have gone through the lists of troubleshooting for LR problems and there just seem to be nothing that works.....I have made new catalogues, moved them, tried using the software on my pc without the EHD, etc etc.......I have tried EVERYTHING...I think.....so I was looking for some answers as to why this is happening....

Help with Backup

I'm not sure if I am putting this in the right place (it's my first post, sorry!) but I would love some help with BackUp.
I have a FireLite external hard drive that is programmed with backup to run every night at midnight. I recently got the notice that the external hard drive is full, and I now keep getting the messages that my startup disk is also full.
I would like to figure out how to delete things off of my external hard drive without having to restore. The external is connected through firewire, and when I click on it through my desktop it only offers the restore function through the Backup application.
Is there anyway to get around this and manually delete things (not everything, just select things) off of the external?
I

Do get a bigger Firewire Drive, then...
Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
SuperDuper...
http://www.shirt-pocket.com/SuperDuper/
Have a look at Synchronize! Pro X 6.0.5
http://www.macupdate.com/info.php/id/6897/synchronize!-pro-x
Or the most expensive one & my favorite, Tri-Backup...
http://www.tri-edre.com/english/tribackup.htm

What kind i do with this issue on this iphone

what kind i do with this issue on this iphone any recomendation

Well, you have encountered the activation lock on the phone and there is absolutely nothing you can do about this.
Where did you get the phone from? You need to contact the previous owner of the phone to get this information and if you can't, then the phone is useless to you and you will never be able to use this phone again.
Congratulations on owning a very expensive paperweight.

Can anyone help with my iPad and iTunes?

I have just plugged in my ipad into my mac and it is asking do I wish to set it up as a new device or sync it with my other devices ie iPhone. My ipad has completely different devices and I do not wish to lose everything on my iPad. Can you help??

Leighs21, I believe it is asking if you would like to Set the device up as new (with computer, Choose yes) or if you would like to restore from a backup of another device. Setting up as new is just on the computers end, not your entire device. This is because it is the first time you are plugging into itunes with that device or the first time after a restore or erased content and settings. Let me know if this helped you. Get an iCloud back up if you are concerned.
Thanks,
A2Q

Recovering from Stupidity - Help with Streaing Issues

A few months ago, I purchased a 1TB external drive and meant to backup my 200GB+ iTunes library which is also on an external drive. Unfortunately, before I got around to doing that I had a brain dead moment one evening and erased my external drive by accident (long story - details aren't important). Fortunately, I was able to recover about 50-60% of the movies either directly off the erased drive or because I had copies elsewhere that I hadn't deleted yet. In most cases, I "reloaded" them into iTunes by double clicking the movie in iTunes and choosing the "Locate" option when it warned me that it could not find the original. In some cases, I deleted the "missing" movie from iTunes and re-added a fresh copy.
Now for the help I need: All of the movies play fine in iTunes. But, when I try to view them on my Apple TV (set to stream wirelessly from my Library), I just get a black screen. I'm used to a delay while it buffers at the beginning but most movies were usually only up to about 10 seconds before they start to play. Now almost all of the movies just sit there and do nothing. I think if I leave it long enough Apple TV does display a message on the screen but I don't recall what it says.
Has anyone experienced this and knows what the problem could be? Do I need to rebuild my iTunes library somehow? Note that I've been using MetaX on these files too so that could be part of the equation?
Thanks,
Larry

Let me play with the configuration tonight and report back.
While I personally prefer a primary library and would suggest you consider it for what you have described you want to do, I do not think it is the reason your videos will not play.
If you do decide to change to a primary library, delete the link on the tv and the listing in itunes preferences before embarking on the whole passcode thing.
I have two Apple TV's - can both of them use the iTunes library on my one machine as a primary library?
Yes
And can I, like Chenks suggests "once linked you can amend the sync options so that nothing sync and everything streams".?
Yes
Changing the type of library you use will involve re-linking the library, this in some cases might be enough to correct your problem.
If you do decide to change your library, I'd do so before revisiting the issue with playing movies, however don't change your library type at this stage just to try to resolve your primary issue.

Please help - CD import issue in itunes

I would really appreciate some help.
I have a Sony Vaio laptop and a HP I Pod.
Have used Itunes with no problems for 9 months and have imported/ripped hundreds of CDs into my library with no issues.
Recently, however, iTunes stopped allowing me to import/rip CDs into my library. When I try, it imports the first 4-5 seconds of the first song and then locks my entire computer up. I have to power down the laptop.
I attempted to run the CD diagnostic through iTunes, that also locked up the laptop.
I have uninstalled and re-installed iTunes several times.
I had my IT guy look at the laptop and do some preliminary research. He indicated that this is not uncommon and that others have reported having this problem since upgrading to iTunes 6.0.
Based on that, I un-installed 6.0 and went back to the version that came with the iPod. I think it is 4.9. Problem still exists.
Please help. I still have a lot of music I would like to load into iTunes.
Thanks!

This is what my CD Diagnostics results are:
Microsoft Windows XP Home Edition Service Pack 1 (Build 2600)
HP Pavilion 061 PE529A-ABA A523X
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: Pfc (2.5.0.204), PxHelp20 (2.0.0.0), AFS2K (3.1.19.0), MxlW2k (1.1.0.116),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: VIA/S3G UniChrome Graphics\VIA/S3G UniChrome Graphics Adapter
IDE\DiskSAMSUNGSP1203N________________________TL100-24, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskGenericUSB_CF_Reader__1.01, Bus Type USB
USBSTOR\DiskGenericUSB_MS_Reader__1.03, Bus Type USB
USBSTOR\DiskGenericUSB_SD_Reader__1.00, Bus Type USB
USBSTOR\DiskGenericUSB_SM_Reader__1.02, Bus Type USB
IDE\CdRomNEC_DVD+RW_ND-2100AD___________________1.26___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
E: _NEC DVD+RW ND-2100AD, Rev 1.26
Audio CD in drive.
Found 12 songs on CD, playing time 54:58 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 06:08:02
Track 3, start time 10:47:27
Track 4, start time 15:01:15
Track 5, start time 19:07:55
Track 6, start time 22:46:30
Track 7, start time 27:29:05
Track 8, start time 31:34:72
Track 9, start time 35:35:07
Track 10, start time 39:56:50
Track 11, start time 43:22:07
Track 12, start time 49:42:17
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 16 20 24 32.
The drive CDRW speeds are: 4 8 16 20.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.

Switching iTunes (older version) from an old latptop with mechanical issues to iTunes on a new computer. The hard drive, issue free, was placed in external drive enclosure. How do I recover iTunes?

I'm trying to moves iTunes (older version) from an old latptop with mechanical issues (non working screen, keyboard, and battery) to iTunes on a new computer. The hard drive, issue free, was placed in external drive enclosure. This was a cost effective way instead of dumping lots of money in an outdated old laptop while I can invest it into a new laptop. How do I recover iTunes?
I'm switching from a 3G phone to a blank 4GS in the process. I would like to have everything that was on my 3G phone and iTunes on my new phone and computer.
Thanks

iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
Windows users see tip at: https://discussions.apple.com/message/18879381

Is there a number I can call to help with my issue? I would like to speak with a real person!

I am not having any luck resolving my issue and i need tech support. Is there a number I can call?

Of course there is, if you are using a current version of Photoshop, If you are on CS5 or earlier, you are out of luck.
Only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option. Brace yourself for a looooong wait and for trying to decipher strong East Indians accents.
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

Need help with Workflow Issue: One notification sending out non-stop email.

Hi,
We've created a custom PO Approval Workflow based on standard PO Approval Workflow and we've had this for a while now. Last week, we encountered an issue where the notification keeps on sending email to the Suppliers and Buyers. We found out that the particular notification_id in the WF_NOTIFICATIONS table keeps getting updated by the minute setting the MAIL_STATUS to INVALID then back to SENT then back to INVALID again and so on. We think that whatever is updating this table is the cause but up until now we haven't found what's updating it. Below are some information of our instance.
Oracle Applications: 11.5.10.2
Database: 10.2.0.4 64 bit
OS: AIX
Custom Workflow based on revision 115.127.11510.16
Customizations:
- Created custom notification XX_EMAIL_PO_PDF_SUPP based on EMAIL_PO_PDF_SUPP.
- Created custom message XX_EMAIL_PO_PDF based on EMAIL_PO_PDF.
- Added #WFM_CC to XX_EMAIL_PO_PDF.
- Created custom attribute XX_PO_WF_EMAIL_PERFORMER and set as Performer to notification XX_EMAIL_PO_PDF_SUPP.
- Created custom function XX_ADDTL_STARTUP_VAL right after function "Set Workflow Startup Values". This function sets #WFM_CC attribute and XX_PO_WF_EMAIL_PERFORMER attribute.
Not sure if the customizations have anything to do with the issue since not all POs have this issue. Have anyone experience this? Would really appreciate any help with this.
Thanks,
Allen

Kashif M wrote:
Just review this thread, may help you
Workflow Notification Mailer is Spamming the Email Accounts of Users [ID 1293792.1]
thanksHi,
This note has solved our issue. Hopefully they will release a fix for this as it is a common thing for us to change the email address of Supplier Site.
Thanks,
Allen

Help with backup issues on ITunes IPhone

Similar Messages

Maybe you are looking for