Help with badi activation

Hi friends! I want use badi definition BADI_J_1BECD for transaction J1BECD. To do this, I have created implementation on SE19 with definition "BADI_J_1BECD" and coded method "Fill entire register I051", but I cannot debug it even putting Break-point in this. I tried debug with SM50 (fake loop) but without sucess. I'm forgetting anything?
My release is 4.6c.
Thanks for any help.

I found the problem! In release 4.6c has a parameter p_bapi with 'X' as default value that block bapi calls.

Similar Messages

  • Need help with a activation code for Adobe Acrobat X Standard for my PC,, Don't have older version serial numbers,  threw programs away,  only have Adobe Acrobat X Standard,  need a code to unlock program?

    Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7. 

    You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.

  • Hi  I really need help with re-activating my little sisters iPad

    Hi
    I really need help with re-activating my little sisters iPad, i already set it up a couple of months ago when i bought it,but unfortunately she disabled it by forgetting her password. i followed the necessary steps to reset it again, when the iPad came back on and we put the apple id and password it kept refusing it, i even reset the password, which sent the verification the email account,  i followed the steps to reset, But then i noticed the message at the top of the activate screen with the message “this iPad is currently linked to the following apple ID _______ with a a few hidden dashes, but at the end of the email it says co.uk, but the problem is the email ends with .com. I have no idea how this happened,  and its driving me insane and my little sister only used her iPad for a month before this happened. for some reason the the iPad email address ends in co.uk when the actual email ends with .com
    I also set up the software find my ipad
    Please help

    You will probably have to contact Apple to see if they can help.
    Contact Us

  • Help with account activation

    hi i have recently activated a second account for our company, and it says the request is still processing, however i need to get to work, do you know how long this step may take!?

    Since this is an open forum, not Adobe support... you need to contact Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • Want help with BADI'S ?

    Hi experts,
        I m new to BADI'S.I got a requirement to get a sub-screen to the standard transaction MFBF.The subscreen will be having 2 fields personnel number and personnel name. For this the functional guy told me to activate the badi <b>rm_hr_integration</b> to get the sub-screen.If the badi is activated he said we get the above mentioned 2 fields as columns in the table control in the selection screen of transaction MF42N. What should i do to activate the badi?If i activate the badi will i get the require sub screen?Do i need to write any additonal code?
        Please anyone suggest me the soln with some procedural steps.sloutions will be rewarded with points.
    Thanks,
    dp.

    Go to transaction SE18 and display the BAdI definition. Read the documentation which will explain what this BAdI does and even tell you how to create an implementation and where do you find additional help/documentation regarding BAdIs.
    There is also a sample code which is available in SE18 via Goto -> Sample code -> Display.

  • Need help with icloud activation lock please

    hi firends
    i have be dragged by apple for last 3 weeks or so i had purchased a device in new zealand with orignal proof of purchase submitted to apple icloud team and the best part is they re validate it with the pervious owner and got the same copy if purchase from them when i try to call them up they said they have submitted to the concern department for unlocking and yesterday i get an email saying they cant do it as the shop who sold in new zealand has bought it from USA and now they need the receipt from there to make it work where all legal check up was done and everything is crystal clear APPLE IS JUST HARASSING me for no reason this why people now do want to promote APPLE when a genuine case is presented to them with complete info from seller to buyer and all documents they not ready to unlock it. i highly request every one to please raise this type of concern and get this one voice to TIM COOK AND HIS TEAMthat why genuine person are being left behind where the same icloud can be unlocked by paying to hackers who help people like us to trust them more then APPLE.
    I hope MR. TIM COOK read this and have a good look into helping genuine person who are stuck with this type of issues please.
    thanks again guys for reading my sad story.
    cheers
    3horse

    How the lock works is explained by Find My iPhone Activation Lock and Find My iPhone Activation Lock: Removing a device from a previous owner's account.
    On YouTube you will find some videos helping bypassing the lock and get access to the contacts. With some luck you can contact the previous owner and force him to remove the iPhone from the devices list at icloud.com/find.

  • Want help with badi implementation?

    Hi experts,
    I m new to BADI'S.I got a requirement to get a sub-screen to the standard transaction MFBF.The subscreen will be having 2 fields personnel number and personnel name. For this the functional guy told me to activate the badi rm_hr_integration to get the sub-screen.If the badi is activated he said we get the above mentioned 2 fields as columns in the table control in the selection screen of transaction MF42N. What should i do to activate the badi?If i activate the badi will i get the require sub screen?Do i need to write any additonal code?
    Please anyone suggest me the soln with some procedural steps.sloutions will be rewarded with points.
    Thanks,
    dp.

    Hi Nagaraj,
       Thanks for the reply. I created the implementation for the badi and activated the badi.Then i run the transaction MFBF to see whether i got a subscreen but i there is no change.In the implementation of the badi there is a tab for subscreen.In that tab there are some fields to fill.The fields call program and screen no are filled automatically with values SAPLBARM and 800 respectively.There are 2 more fields to fill called program and screen no.What i have to fill in those fields?any suggestions?
    Thanks,
    dp.

  • Need help with PPM activity type

    Hi All -
    I am trying to CIF a production version and I have the master recipe with 1 operation and 2 activities. My first activity is SETUP and the second activity is PROCESS.
    However, after CIF'fing the PV, I see in APO that both the acitivities have an activity type " Produce".
    Which setting assigns the activity type " Setup" for my activity SETUP?
    Appreciate all your help.
    Thanks
    Varun

    Hi Varun,
    in order to transfer the activity as "set up", please check if the following settings are done.
    1. In the resource (ERP side), check if you have maintained the formula for "setup' under "capacity" and also in "scheduling" tab.
    2. In the recipe, check if you maintained the time for setup.
    Let me know if this helps
    Regards,
    Ram

  • Help with CS5 Activation

    I'm installing my CS5-Extended on a new computer (I finally upgraded my PC).   Since my CS5 was an upgrade from CS4, I was ready to enter both the CS5 and the CS4 serial numbers.  But, I was only asked for my CS5 serial number.  It accepted the number and opened Photoshop.   My next step is to update all of the CS5 programs (Bridge, Camera Raw, etc.).   But, every attempt to update the software fails - and the error message states that my serial number is NOT correct.   I deactivated the copy and when I ran the program again, it asks me for the serial number - JUST the CS5 number and once again, it accepts the number, but will NOT update any of my CS5 programs.   Does anyone have a recommendation.

    Hi Jeff, thank you again for your follow-up on my issue - can't tell you how much I appreciate your help!
    I started with Photoshop version 6.0, then version 7.0, then CS2, CS3, CS4-Extended and now CS5-Extended.   The confusing item in my purchase history was the accidental purchase of Photoshop Elements - I intended to purchase Premier Elements for video.  Adobe was kind to allow an immediate refund of the mistaken purchase of Photoshop Elements (which was never activated).
    When I spoke with Adobe earlier today, the rep from the concierge team asked me to read him the serial numbers I used to activate my CS5-Extended.  He confirmed the serial number I'm using is exactly correct.   That is why it activated my CS5-Extended.
    Here's the issue.  For some reason, THIS install of CS5 did NOT include a request for my CS4 serial number.  As a result, something on the back-end of my install is now blocking any update of my CS5 software, including Camera RAW.
    I've tried the following to correct.  First, I "permanently" deactivated CS5 and re-launched the program which prompts the request for my serial number.  Again, it ONLY asked for my CS5 serial number, which it accepted and again, the program BLOCKED any software updates.   Second, I installed CS4-Extended on this computer (which, by they way, the install of CS4 DID ask for both my CS4 and CS3 serial numbers and activated).   After this I deactivated ("permanently") and re-launched CS5.  Unfortunately, the successful installation of CS4-Extended did NOT change my inability to update my CS5 software.

  • Help with badi

    Is it a good idea to use function modules in badi custom code
    i am trying to modify one of the infotype records (0004) using badi but the field is not getting updated , im using func mod HR_INFOTYPE_OPERATION.
    Can u suggest any  alternatives?? Help will be much appreciated...

    Hello Vinay
    Unfortunately you did not reveal the most important detail for answering your question:
    Which BAdI are you using?
    Assuming that you perhaps use BAdI <b>HRPAD00INFTY</b> (<i>Update / Infotype maintenance</i>) then you can see from the signature of the interface methods (IF_EX_HRPAD00INFTY; on ECC 5.0) that none of them is intended for changing current data of the transaction. On the contrary, all method parameters are IMPORTING parameters and are called BY VALUE. Thus, no changes of the parameters within the interface methods will be transmitted to the caller.
    Method IF_EX_HRPAD00INFTY~AFTER_INPUT is the only method having an exception which implies that this method can be used to perform checks (compare PBO vs. PAI data) and reject changes by raising the exception.
    Final remark:
    It is complete nonsense to commit work <b>within </b>a BAdI because the BAdI is called within a transaction which should be properly committed at the end of the transaction.
    Regards
      Uwe

  • HT4993 I need help with an Activation Error Message on my Iphone 5

    Hi I am having Trouble with my IPhone 5
    It shows an Activation Error message

    The iPhone 5 says it can not connect to iTunes

  • Need a help with BADI.

    Hello,
    I have a query. I need to call a screen with a field from a BADI. Doing that gives me a dump. Is this possible? Can any one kindly suggest on this.
    Thanks,
    Ganesh

    Hi Ganesh,
    Can you please let me know which BAdI are you using.
    Is it with SRM-EBP ? Or can you post your error dump to have a look.
    Regards.
    Pras Durafe.

  • Virtual kf's and help with BADI

    Hi all,
    How are you? Could somebody who has worked with virtual characteristics and kf's send me the scenarios and screen shots and also the badi code implementation to my mail id.
    [email protected]
    Thanks and all the best
    Prathibha Eluri

    I found the problem! In release 4.6c has a parameter p_bapi with 'X' as default value that block bapi calls.

  • Help with 2nd activation attempt please.

    My second installation of Adobe Design standard CS5 failed to work as it blew the fan on my laptop!  That is now finally fixed however I can't attempt to activate it again, & I can't find out how to contact Adobe to ask for help!  Grateful for some advice as having paid for it, I would like to be able to use it!

    I was told the link I provided no longer takes people in circles.  Here is a link for chat...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • Help with recurring activation screen on iOS 8.1.2 and iOS 8.1.1

    still can't troubleshoot recuring activation screen on iOS 8.1.1 and iOS 8.1.2,when the screen goes to sleep,the network drops and then the activation required screen comes up again

    anypats wrote:
    With 8.1.2 there were no changes relating to Health, wi-fi issues, Bluetooth, etc. The only change was an issue with ringtones disappearing.
    Nice of Apple to issue a one note upgrade.

Maybe you are looking for