Help with batch converting to change all videos to same size...720x480

i need help batch converting all my .mov files to the same dimensions of 720x480...but i don't want to lose quality i just want to change the size...any suggestions in programs?

Hi
What format (codec) & size are your original movies?
What video softwares (if any) do you have installed?
...any suggestions in programs?
You mean ... free?
Alberto

Similar Messages

Help with updates - The software change returned error code 0x87D00215(-2016411115).

I have rolled out bunch of updates across few hundred workstation systems.
Few of the desktops have failed to install SOME of the updates and just can't get my head around as to why?
Looking at one of the workstations, I can see 5 updates are pending download at 0%.
Some of these fail after a while and with in Software Centre, I can see 'Help with updates - The software change returned error code 0x87D00215(-2016411115).'. Not exactly sure what this means, but I have tried clearing the cache and
rebooting the workstations few times.
(I have also tried to use Windows Update and install one of these manually, which worked.)

Investigating this further, I have found the following in CAS.log:
ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Successfully created download request {ED6E9E5C-E806-43CA-9F93-49AC72D1DEAD} for content 53bf87a2-bedf-4def-b0ec-9637613c3429.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting locations synchronously for content 99ddb078-b780-4605-8fac-9607fe56450d.1 with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
The number of discovered DPs(including Branch DP and Multicast) is 1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Calling back with the following distribution points ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Distribution Point='http://DPSERVER.com/SMS_DP_SMSPKG$/99ddb078-b780-4605-8fac-9607fe56450d', Locality='LOCAL' ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting content 99ddb078-b780-4605-8fac-9607fe56450d.1, size(KB) 0, under context System with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Successfully created download request {67B7E59B-A386-4EA8-BF39-2EB64B108A6C} for content 99ddb078-b780-4605-8fac-9607fe56450d.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting locations synchronously for content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1 with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
The number of discovered DPs(including Branch DP and Multicast) is 1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Calling back with the following distribution points ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Distribution Point='http://DPSERVER.com/SMS_DP_SMSPKG$/61d33de7-9582-41e3-82fc-3e0f970b60f3', Locality='LOCAL' ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Requesting content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1, size(KB) 0, under context System with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
Successfully created download request {12E48136-B545-4C42-9745-9FF97CE38D52} for content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)

Need help with creating template. Changes are not going through to index.html page

Hi all,
I have an issue with my template that I am creating and also a question about creating template Regions (Repeating and Editable).
Somehow my changes to my index.dwt are not changing my index.html page.
Also my other question is: For my top navigation bar and left navigation bar links, do I need to select and define each individual button or link as Repeating/Editable Region? or can I just select the whole navigation bar (the one on the top) etc...
Below are my steps for creating my template...I am kinda fairly new to using DW and this is my first attempt to making a template following the DW tutorial CD that came with DW CS3.
I appreciate any help with this...regards, Dano
-Open my index.html file
-File/save as template
-Save
-update links - yes
-Select Repeating and Editable Regions (I selected the whole top navigation bar and selected Repeating Region and Editable Region, same with the left side navigation links)
-File close all
-Open the index.dwt
-Save as and selected the index.html and chose to overide it..
When I make changes to my index.dwt it is not changing the index.html
I feel that I am missing some important steps here.....
Website address
www.defenseproshop.com

Figured out

Help with batch processing

Hi, I am having trouble with batch processing. I want to apply adaptive noise reduction (ANR) to several files from the same source tapes. So, following the help instructions, I create a script from one file. When I try to apply it to the other files, instead of applying ANR to them, it simply saves them as is. The steps I perform are as follows:
I select the entire wave (I have also tried it without first selecting)
I open the scripts box in the file menu
I click on open/new script collection and create a new script
I title the new script
I click 'record'
I close the scripts box
I run ANR on the file
I go back to the scripts box and click 'stop current script'
I click add to collection
I close the scripts box
I open the batch processing box
I select the files, then the script, then I click to start processing
When I try to apply this to script to other files, it saves them but doesn't apply ANR.
Can anyone suggest what I am doing wrong? Also, in the scripts box, there are three options for the type of script that I can create. One is highlighted: 'Scripts start from scratch.' Is that the correct one to use? If not, how do I select one of the others? I click on them but nothing happens. Finally, when creating a script, do I save the file before or after clicking 'stop record'? I have tried it both ways but don't know which is correct (neither seems to make a difference).
Just to be as thorough as possible, below is the text of one of my scripts, in case that contains any clues. Thanks so much for any and all help!!
Collection: doubletnr
Title: d2
Description:
Mode: 2
Undo: 0
Selected: none at 0 scaled 109479495 SR 44100
Freq: Off
cmd: Channel Both
Selected: 0 to 109479494 scaled 109479495 SR 44100
Freq: Off
Comment: Restoration\Adaptive Noise Reduction
cmd: {EA93BBBE-0B8F-47D6-AC6D-B67B46524E41}
1: 52,AAAÛÚZAAQãýÇÛÚÚAAAĎč¸āĂ}úÓ~ipkiëåÁëåÁ
2:
3: 13
4: 0
5: 0
6: 3190728
7: 0
8: 0
9: 0
10: 1
Freq: Off
End:

This is what my script looks like. Although I was worried about the strange characters in the script, it does work.
Make sure that the script you use is suitable for the sample rate and bit depth of the file. E.g. if you have 44100/32-bit files, then don't use a script that was recorded on a file with e.g. 48000/16-bit. If required, resample or make different scripts for different rates/depths.
Collection: Test ANR AA Forum
Title: Test ANR AA Forum
Description:
Mode: 4
Undo: 1
Selected: 0 to 9233563 scaled 9233563 SR 44100
Freq: Off
cmd: Channel Both
Selected: 0 to 9233563 scaled 9233563 SR 44100
Freq: Off
Comment: Restoration\Adaptive Noise Reduction
cmd: {EA93BBBE-0B8F-47D6-AC6D-B67B46524E41}
1: 52,AAAÛÚZAAQãýÇÛÚÚAAAĎč¸āĂ}úÓ~ipkiëåÁëåÁ
2:
3: 13
4: 0
5: 0
6: 154705552
7: 0
8: 0
9: 0
10: 1
Freq: Off
End:

Help with mutiple files produced by sharing video to Itunes

Hi All,
As I continue to learn I am looking for some help. After importing DV video and then creating a movie in Imovie08 I shared the movie with Itunes. Looking through all the video files there are now two copies of everything on the drive..
Copy #1 is in- movies/imovie/sharing/itunes/filename.mv4
Copy #2 is in-music/itunes music/ movies/filename.mv4
The questions are can I delete the one in the Itunes music file? what can I do to prevent this in the future?
Thanks
GE

First most of the movies I am making are over 1gb so having two copies is not really an option as I will soon run out of space.
Most people would agree and it is not necessary to do if both copies are "standalone" files. Yours are.
when I checked get info for both files they were the same size so no reference smaller file as I have seen with the projects.
This merely confimrs that both files are, indeed, "standalone" copies and that iTunes is operating with the default preference to physically copy imported/added files to your iTunes Library wherever that might be located.
I was able to go into Itunes in the advanced and tell it not to copy to Itunes (thanks again) when sharing. On the most recent shared project this has eliminated the file in Itunes music but saved to the movie, imovie sharing, itunes ...File. When I open I tunes it did pick up the movie and sync with my apple TV. So far so good. My question now is why not leave like this?
You can leave it like this and that is one of the things mentioned previosly when I cautioned you that in this mode you could not then delete the shared folder copy of your video. Basically you have to options.
1) The first is to leave your standalone files physically in their original stored location and copy a "reference" pointer (like an alias) to iTunes. This method of operating keeps your iTunes Library relatively small but leaves your main "standalone" files scattered anywhere on any of your hard drives depending on how/where they were created/stored.
2) The second is to use the iTunes default setting as it was, physically copy the files to the iTunes Library, and then delete the "sourcing" or "intermediate" file which is no longer needed. This work flow "consolidates" all of your video files to single, known area but means your iTunes Library can become quite large.
The option you choose is up to you. I prefer the second option as I have an external 1 TB drive dedicated exclusively for use as my iTunes Library. In this manner all of my files are located in a known location and I can keep my internal start-up drive (and all other drives) relatively free of "clutter" by deleting video files from their source location as soon as I have imported them to iTunes. And, since I know where the file are located, I still maintain normal access to them for any "file" level operations (e.g., posting to any of my web sites/servers, sharing with friends/family via e-mail, QT Link files, and "reference" files, etc. Basically I use iTunes for the "physical" management of my videos for distribution to iPod, iPhone, and TV devices; iTunes, Front Row, and QT Player viewing; as well as, a central storage point for file level operations such as e-mail (standalone, reference, or QTL), site/server upload source, peer-to-peer distribution, etc. This works for me but may or may not suit another user's particular needs.
One suggestion earlier was to delete the Movie/Imovie sharing file. While this makes sense I would have to manually transfer it in or share to both then delete it.
The "sharing to iTunes" by iMovie is "automated." The deletion of extraneous files is not. Since iMovie does not know whether you are using iTunes manage your files physically, it cannot be pre-programmed to automatically delete the "shared" file without risking it will "orphan" the reference sent to/stored in iTunes. That is why the deletion is left to the user as a manual option.
Why not leave the flow the way it is. Will I later have some issue with I tunes? Or is the potential to over write the information if I adjust the project the issue?
As previously stated, you can use iTunes in this preference mode. While I doubt there would be any potential for accidental "overwites," there are other possibilities. Besides offending my sense of proper organization, there is the potential for such "scattered" files to be accidentally deleted in error. Also, there is always the possibility that someone might "move" the "standalone" file to a different location on the same or a different hard drive. In either instance, your iTunes file pointer would likely be "orphaned" and the content would no longer be availalable until or unless a valid path were restored. In addition, having files scattered all over your drives makes backing them up a bit of a chore. By consolidating all of my videos and music physically as I do, it is much easier to automatically "back them up" using another external drive and either Time Machine or other such software -- something to consider after doing all that work creating your files. What is best for you will depend on you specific work flows, needs, and concepts. There is no right or wrong here but merely what works best for you.

Photoshop CC not defaulting as first priority "open with" when attempting to change all

Can anyone help, I have both Photoshop CC and Photoshop CS6, when I go to change all files ending in .psd to Photoshop CC it reverts back to CS6.
This is happening in the info sub-tab when I right-click a .psd file.
Any ideas?
Thanks in advanced

I think that is an operating system issue with file associations
Search http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US for Windows information

Help with Expect command to change config on hundreds of ASA's.

Hi All,
I'm looking for some help with the Expect command to automate some tasks, I'm certainly no programmer but I am struggling, here is an example of my script.
#!/usr/bin/expect -f
# This simple Expect script will add a new Syslog destination in
# Cisco switches (IOS based)
# We assume here that all switches uses the same credentials
# for the administrative tasks
# Define variables
set password "site1"
set enablepassword "site1"
# Define all the switches to be reconfigured (separated by spaces)
set switches "site1 site2 site3"
# Main loop
foreach switch $switches {
        puts "Processing switch: $switch";
        # Open the telnet session:
        spawn telnet $switch
        # Perform authentication
        expect "Password:"
        send "$password\r"
        expect ">"
        # Switch to enable mode
        send "en\r"
        expect "Password:"
        send "$enablepassword\r"
        expect "#"
        # Enable configuration mode (terminal)
        send "conf t\r"
        expect "#"
        # Modify VLAN1
        send "interface vlan1\r"
        expect "#"
     # Change VLAN1 Description to Uppercase
        send "description INSIDE\r"
        expect "#"
        send "exit\r"
        expect "#"
        # Save config to NVRAM
        send "wr\r"
        expect "#"
        #Logging out
        send "exit\r"
        expect eof
In the example this works fine for SITE1 passing the credentials SITE1 as the default password and SITE1 as the enable password. I need to do usernames and passwords that are different for each site. I have to make some changes across hundreds of ASA's to terminating tunnels to a new location. Can anyone help out in how to do this, I know I am close I just need it to read, siteA, username, both passwords from a text file, etc
Greg

Hello,
try to modify this example to your needs ->
http://www.bitpapers.com/2012/04/cisco-changing-configurations-of-many.html
Best Regards
Please rate all helpful posts and close solved questions

Help with Message Mapping - Context Change

I need help with the following message mapping. I am filtering by EMP_STAT in the Message Mapping. I have this working for the ROW structures, but I can get the HEADER/REC_COUNT field to calculate. I can do just a record count of ROW and get it to work, but I can't get it to work with the filter EMP_STAT = 'REG' added. I get a context error. Could someone send me the mapping code.
Sender XML----
<RECORD>
<ROW>
<EMPLOYEE>111</EMPLOYEE>
<EMP_STAT>REG</EMP_STAT>
</ROW>
<ROW>
<EMPLOYEE>222</EMPLOYEE>
<EMP_STAT>PT</EMP_STAT>
</ROW>
<ROW>
<EMPLOYEE>333</EMPLOYEE>
<EMP_STAT>REG</EMP_STAT>
</ROW>
</RECORD>
Receiver XML----
<RECORD>
<HEADER>
<REC_COUNT>2</REC_COUNT>
</HEADER>
<ROW>
<EMPLOYEE>111</EMPLOYEE>
<EMP_STAT>REG</EMP_STAT>
</ROW>
<ROW>
<EMPLOYEE>333</EMPLOYEE>
<EMP_STAT>REG</EMP_STAT>
</ROW>
</RECORD>

Hello,
You can use this mapping
For REC_COUNT:
EMP_STAT -> equalsS: constant:REG -> ifWithoutElse -> removeContext -> count -> REC_COUNT
                                 EMPLOYEE -> /
For ROW:
EMP_STAT -> equalsS: constant:REG -> ifWithoutElse -> removeContext -> ROW
                                 EMPLOYEE -> /
For EMPLOYEE:
EMP_STAT -> equalsS: constant:REG -> ifWithoutElse -> removeContext -> SplitByValue -> EMPLOYEE
                                 EMPLOYEE -> /
For EMP_STAT:
Constant: REG -> EMP_STAT
Hope this helps,
Mark

Need help with installing on Photosmart C7280 all-in-one

I did have my printer installed, and was using the printer for 3 laptops wireless within my home. Now I can not even find my Backup disk, so i need help with downloading the software to use my printer, and also get it back to being used wireless. I do not know what happened, but the fax for this printer is listed, just not the printer itself. please help!
This question was solved.
View Solution.

Click here to download the software for your printer:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3204785&lc=en&cc=us&dlc=en&lang=en&cc=us
chose the appropriate operating system that corresponds to your computer and download the full feature software.
Please click on KUDOS if you find my solution helpful.

Off Topic, Help with Batch Auto Cropping

I have 2000+ scanned slides (Nikon 4000 film scanner) in Tiff format, and there is a black band around each scanned slide (which is normal for slides - the scanned area is slightly larger than the picture area) that I want to get rid of. I am NOT going to crop them one at a time!! Does anyone know of a program that will do this automatically in batch mode? I once saw a program that would "auto Crop" photos but I can't remember the name. The slides are 30 years old ( hence the digitizing ) and I don't care too much about the accuracy, ie if it crops a little too much.
Thanks
-Robert

wish i could reward 100 points
me too ...
and another thing, once you do the l&S crop, if you want to move the location slightly, hit 'C' to bring up the crop HUD and the image goes back to full size again, but with the crop rectangle the same size as before and you can move it around if need be ...
this was an important thing that was introduced in 1.5.x along with l&s of straightening ...

Online help with Batch Capture

I'm trying to online a sequence in a tapeless workflow. I'm using Log & Transfer along with Batch Capture but Batch Capture keeps looking for a deck. How do I get it to look for my Hi-Res digital files?

Yeah...that's the problem.
You directly imported it and worked with it natively? What is this footage? From what camera?
The only way to offline/online with tapeless is to bring in the footage via Log and Transfer. Log and Transfer to ProRes Proxy...then you can Batch Capture to a higher data rate ProRes format.

HT4168 ePub file plays all videos the same...Any suggestion.?

I created an ePub file today for the first. The pages document was good, included are three different videos in three separate chapters. The Pages document plays all three and an m4a music file perfectly. Somehow when it converts the document to the ePub file it somehow mixes the coding up. Each video shows the right image initially, but when played it plays the first video chosen for all of the videos.
So, the initial images seems right but when selected the video defaults to whichever video is played first on my iPad3.
Again the pages doc is fine.. Any suggestions? I am using OSX Lion and Pages 9

Tim, thanks for your response.
To diagnose easily and remove any additional implications of WMC, I shall comment only on WMP:
Sometimes the Video won't start (remember i am just clicking on the IFO in the ripped DVD folder, not playing an actual DVD), although most times, it does start.
When it starts, it seems to play OK , but if you try fast forward/rewind or selecting elsewhere in the video, it freezes.
In all cases, no message is shown.
When I click later in the video, WMP shows the desired time in the video but then seems to do nothing, although the control buttons SEEM to work (e.g. pause/play toggles). At this stage. WMP is showing around 40% CPU and 131Mb memory. No matter how long
I wait, I can't resume the video. I can close WMP easily when this sort of problem happens, so it is not a total 'freeze'. CPU/RAM then reduces to zero.
Restart WMP and video starts OK. Normal running is 2% CPU and 95Mb RAM.
Try e.g. chapter settings and it 'freezes' with CPU up to 43%.
If I double-click on a different IFO, it opens up in WMP, replacing the 'frozen' video and plays OK with CPU reverting to 2%.
It exhibits this sort of performance on all videos on U: and V: (two partitions of the Seagate 3Tb drive), but ANY video on any other USB drive is fine.
When I say 'freeze' it doesn't 'feel' like a software crash; it isn't as serious. However WMP cannot restart the video.
Reminder that it always seems to work ok in VLC.
Thanks
Paul

Making all video the same screen size

Hi,
I am importing numerous screen size video into Premier Pro. How can I get them all the same size?

Make a sequence the same size as the majority of the clips and right click 'scale to frame size' for all the ones that don't match. You might have to change the scaling manually if they are of different shape.

I share a an apple id with my kids. We all use the same credit card for purchases. Is it possible for only me to use the icloud online storage without making this available or visible to the kids?

My kids and I all use the same credit card and password for app and music purchases. I'm assuming we all use the same apple ID too. (not sure) We can share apps and music although we all have our own itunes libraries. Is it possible for only me to use the icloud online storage without making this available or visible to the kids or do we all have our own storage?

I just checked and they have already sucked up all my online storage. Ahhh techy teens! I think I will just leave it at that and back my own stuff up on my computer. Less confusing
Thanks for all the help! I am definitely more educated now and I'm off to check that cc bill too.

Help with displaying image using OpenGL ES sample code - image size prb

I am using some sample code that currently displays an image 256x256 pixels. The code states the image size must be a power of 2. I have tried an image 289x289 (17^2) and it displays a square the same size as the 256x256 with a white background. I want an image 320x320 displayed. Should be obvious for people familiar with OpenGL. Here is the code which displays the image and rotates:
- (void)setupView
// Sets up an array of values to use as the sprite vertices.
const GLfloat spriteVertices[] = {
-0.5f, -0.5f,
0.5f, -0.5f,
-0.5f, 0.5f,
0.5f, 0.5f,
// Sets up an array of values for the texture coordinates.
const GLshort spriteTexcoords[] = {
0, 0,
1, 0,
0, 1,
1, 1,
CGImageRef spriteImage;
CGContextRef spriteContext;
GLubyte *spriteData;
size_t width, height;
// Sets up matrices and transforms for OpenGL ES
glViewport(0, 0, backingWidth, backingHeight);
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
glOrthof(-1.0f, 1.0f, -1.5f, 1.5f, -1.0f, 1.0f);
glMatrixMode(GL_MODELVIEW);
// Clears the view with black
//glClearColor(0.0f, 0.0f, 0.0f, 1.0f);
glClearColor(255, 255, 255, 1.0f);
// Sets up pointers and enables states needed for using vertex arrays and textures
glVertexPointer(2, GL_FLOAT, 0, spriteVertices);
glEnableClientState(GLVERTEXARRAY);
glTexCoordPointer(2, GL_SHORT, 0, spriteTexcoords);
glEnableClientState(GLTEXTURE_COORDARRAY);
// Creates a Core Graphics image from an image file
spriteImage = [UIImage imageNamed:@"bottle.png"].CGImage;
// Get the width and height of the image
width = CGImageGetWidth(spriteImage);
height = CGImageGetHeight(spriteImage);
// Texture dimensions must be a power of 2. If you write an application that allows users to supply an image,
// you'll want to add code that checks the dimensions and takes appropriate action if they are not a power of 2.
if(spriteImage) {
// Allocated memory needed for the bitmap context
spriteData = (GLubyte *) malloc(width * height * 4);
// Uses the bitmatp creation function provided by the Core Graphics framework.
spriteContext = CGBitmapContextCreate(spriteData, width, height, 8, width * 4, CGImageGetColorSpace(spriteImage), kCGImageAlphaPremultipliedLast);
// After you create the context, you can draw the sprite image to the context.
CGContextDrawImage(spriteContext, CGRectMake(0.0, 0.0, (CGFloat)width, (CGFloat)height), spriteImage);
// You don't need the context at this point, so you need to release it to avoid memory leaks.
CGContextRelease(spriteContext);
// Use OpenGL ES to generate a name for the texture.
glGenTextures(1, &spriteTexture);
// Bind the texture name.
glBindTexture(GLTEXTURE2D, spriteTexture);
// Speidfy a 2D texture image, provideing the a pointer to the image data in memory
glTexImage2D(GLTEXTURE2D, 0, GL_RGBA, width, height, 0, GL_RGBA, GLUNSIGNEDBYTE, spriteData);
// Release the image data
free(spriteData);
// Set the texture parameters to use a minifying filter and a linear filer (weighted average)
glTexParameteri(GLTEXTURE2D, GLTEXTURE_MINFILTER, GL_LINEAR);
// Enable use of the texture
glEnable(GLTEXTURE2D);
// Set a blending function to use
glBlendFunc(GL_ONE, GLONE_MINUS_SRCALPHA);
// Enable blending
glEnable(GL_BLEND);
// Updates the OpenGL view when the timer fires
- (void)drawView
// Make sure that you are drawing to the current context
[EAGLContext setCurrentContext:context];
glBindFramebufferOES(GLFRAMEBUFFEROES, viewFramebuffer);
glRotatef(direction * 3.0f, 0.0f, 0.0f, 1.0f);
glClear(GLCOLOR_BUFFERBIT);
glDrawArrays(GLTRIANGLESTRIP, 0, 4);
glBindRenderbufferOES(GLRENDERBUFFEROES, viewRenderbuffer);
[context presentRenderbuffer:GLRENDERBUFFEROES];
}

+I am using some sample code that currently displays an image 256x256 pixels. The code states the image size must be a power of 2. I have tried an image 289x289 (17^2)+
The phrase "a power of 2" refers to 2^x so your choices above 256 are 512, 1024 etc.
The texture size has nothing to do with the displayed size - OGL will stretch or shrink your texture to fit the size of the polygon you're displaying it on. I recommend you scale your image to 256x256 and work on make the polygon the size you want and work on your image quality from there.
You can work on the size or orientation of the poly surface to make it larger but OGL doesn't support setting a model to a screen image size or anything like that. That sounds more like a Quartz or CoreGraphics kind of thing if you want to set an exact screen size to the pixel.
HTH,
=Tod
PS You can display your code correctly by using { code } (without the spaces) on either side of your code block.

Help with batch converting to change all videos to same size...720x480

Similar Messages

Maybe you are looking for