Help With BC 4.7 and marrketplace connectors

Hi all,
I know this is not the right forum to post this question, but i coldn´t find any appropiated forum to post it. I have to develop three interfaces using BC instead of XI. Customer requierements! Those interfaces are the following:
Orders response and invoiced in XCBL format that BC reads from a file and have to create the idocs in SAP. And the oder one is and Order05 that we have to post in a file in ean.ucc format. I have install the marketplace connector in my BC server, But i have no idea how to use it. because It was imposible to find any documentation about this connector.
Any help please?
Many thanks
Regards Noelia

Hi,
did you those docs:
http://service.sap.com/~form/sapnet?_SHORTKEY=01200252310000042376&
you can also try contacting Christoph Ludwig (as specified here):
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000418584&
maybe he will provide you with some more info
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Similar Messages

  • Help with opening Adobe Reader and downloading updates

    I can not open Adobe .pdf files any longer (this started yesterday, prior to that I could open adobe files).
    When I double click a .pdf file I get this notice on my screen: Windows cannot access the specified device path or file. You may not have the appropriate permission to access file.
    So I went to the Adobe download site to download a new copy of Adobe.  When I start the download I get this on the screen:  The instruction at "0x0e3a0068" referenced memory at "0x0e3a0068."  The memory could not be written.  Then two options are listed: click OK to terminate or cancel to debug.  So I click on cancel and I get this on my screen: Internet Explorer has closed this webpage to help protect your computer.   A malfunctioning or malicious addon has caused I.E. to close this webpage.
    I don't have AVG running, I do have avast but I've disabled it.  I ran Registry Mechanic and an I.E. erasure program but nothing helps.
    I have gone into I.E. and reduced the security level to its lowest state but no joy.
    So, any ideas or suggestions on what's the problem and how to overcome it would be appreciated.  Thanks, in advance, for your reply.  Jim R.

    Hi Mike..tried that as well but no joy.  A friend of mine was looking at it all and noticed that it was an I.E. thing as far as not letting me redownload the reader so I went to Mozilla Firefox and I could download a new version but....whenever I attempt to open a .pdf file I get that message, "Windows can not open the specified device, path or file. You man not have the appropriate permissions to access the item." 
    Damn...this is irritating as I need to get to some of thos files as I need them for a Journal I'm working on as editor-in-chief. 
    It all worked just fine last Saturday but starting Monday when I was on my flight out to D.C.  no joy. 
    Sigh...Jim R.
    Jim R.
    Date: Tue, 1 Dec 2009 14:50:27 -0700
    From: [email protected]
    To: [email protected]
    Subject: Help with opening Adobe Reader and downloading updates
    Under the help menu, there is an option to repair the installation of reader. Did you try that?
    >

  • Need help with my iPhone 5 and my Macbook Pro.

    Need help with my iPhone 5 and my Macbook Pro.  I was purchased some music on itunes at my mac. Some reason I deleted those music from both on Mac and iPhone 5.  Today, I went to my iPhone iTunes store inside of iCloud to redownload my puchased. But those song won't able to sync back to my iTunes library on my Mac.  Can anyone help me with that ??....
    iPhone 5, iOS 6.0.1

    You've posted to the iTunes Match forum, which your question does not appear to be related to. You'll get better support responses by posting to either the iTunes for Mac or iTunes for Windows forum. Which ever is more appropriate for your situation.

  • Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?

    Seeking help with PS Elements 11 which does not work with Epson r2000 printer.  Epson tech support could not fix, said it is PS e11 problem.  Receive prompt on PS e11 screen when I try to print stating "not compatible or settings are not correct.  Have set PS to manage color and printer manages color to off.  Would appreciate any suggestions.  Thank you.

    Hi,
    Sincerely appreciate your help.  Running Windows 7 on a  Dell XPS420.  System has been very stable for years.  Before purchasing the Epson r2000, I owned an r1800 which was an excellent printer but after seven years started to exhibit paper feed problems.  The r1800 worked with all applications and I was well satisfied with the saturation, contrast, etc. printing mostly 8x10 and 11x17 prints. 
    Thank you for the information about the # of installs for PS E11, will try uninstall/reinstall this morning.
    Will let you know how things go.
    Richard
    Date: Thu, 12 Sep 2013 19:47:38 -0700
    From: [email protected]
    To: [email protected]
    Subject: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
        Re: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
        created by Barbara B. in Photoshop Elements - View the full discussion
    What operating system are you using?
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5678022#5678022
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5678022#5678022
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5678022#5678022. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • New help with my mac air and airport extreme time capsule dont know how to save to time capsule and use as a external hd

    new help with my mac air and airport extreme time capsule dont know how to save to time capsule and use as a external hd would like 2 store my home videos and pictures on the time machine (ONLY) as the MAC AIR has storage space limited space please help. THANK YOU.

    See the info here about sharing or using the TC for data.
    Q3 http://pondini.org/TM/Time_Capsule.html
    It is extremely important you realise.. the Time Capsule was never designed for this.
    It is a backup target for Time Machine.. that is the software on the computer that does backups.. it has no direct connection to the Time Capsule.
    It has no ability to back itself up.. unlike all other NAS in the market. It is therefore likely one day you will lose all your files unless you seriously work out how to backup.
    The TC is slow to spin up the hard disk and fast to spin down. iTunes and iPhoto will continually lose connection to their respective libraries.
    iPhoto in particular is easy to corrupt when you move photos over wireless into the library.. once corrupted all is corrupt. A single photo will ruin it all.. so backup is utterly essential.
    Time Machine cannot do backups of network drives. ie the TC. You will need a different backup software like CCC. You will then need another target to backup to..

  • Help with Oracle Report Builder and SQL Server2000

    Hey guys,
    I just installed it Oracle Developer Suite10g with Report Builder and I am trying to use Report builder and wants to connect with SQL Server 2000. The problem that I am running in to is SQL Server 2000 i have is Window Authentication so Does not required to enter user name and password. So how can i connect my report builder to SQL server or is it possible to connect Report builder to SQL server?
    Also, I want to create small practice version of database in Oracle how do i do it? what i mean by that is I installed trial version or Oracle developer 10g from www.oracle.com and now trying to get some knowledge with oracle. Could any one can give me some direction in this matter please.
    Thank You
    Key

    Have a look at the reports help for the purpose header and trailer sections. Here is an exert:
    "Report sectioning enables you to define multiple layouts in the same report, each with a different target audience, output format, page layout, page size, or orientation. You can define up to three report sections, each with a body area and a margin area: the names of the sections are Header, Main, and Trailer. By default, a report is defined in the Main section. In the other sections, you can define different layouts, rather than creating multiple separate reports. If you wish, you can use the margin and body of the Header and Trailer sections to create a Header and Trailer page for your reports."

  • Help with ibook G4, Freezing and wont turn on :-(

    Can anyone help a fellow MacLady?
    I have an ibook G4, her her a year with no problems,
    2 days ago cursor froze, and I turned off and restarted and am left with a blank screen.
    Every now and then it starts up, all my documents are there, connects to to wireless ok, and last for anything from 5mins to 1hr. Then freezes again.
    Took it to a local PC man who looked and said he doenst really know apples but guessed it was Hard Drive.
    Have no lost NO information from the PC, its all backed up now thankfully as I do occassionaly get access to it, though all my 876 entourage emails have strangely dissapeard. Aghhhhhhhhhhhhhh
    Have an appointment with a "Genius" in Bluewater on Wednesday (earliest they can see me), but just wondered if anyone knew what the problem might be and how much I am maybe looking at for a repair? As the PC man told me to buy a new one as this will cost hundreds.
    I work from home so not been able to print or do hardly anything so am running out of time
    Thanks for any help, the PC is here next to me (am on my old Win one, blergh) so if anyone can help or give advice I would really appreciate it,
    Thanks for any help in advance.

    Hi LadyMacB and welcome to Apple Discussions.
    First of all see if you can start up inSafe Mode.
    Safe Boot takes longer than normal startup.
    What is Safe Boot, Safe Mode.
    If you are able to start up in Safe Mode and reboot into normal mode this may, in itself, be enough. If not restart in Safe Mode, if you are able, & put your OS X install disk in and restart holding the C key until you see the spinning gear wheel. When you get to the Language screen select your language and select 'Next'.
    At the top of the screen towards the left in the menu bar select Utilities>Disk Utility. Select the Drive name at the very top, then look at the report at the bottom of the window. Amongst everything else you will, hopefully, see S.M.A.R.T. status 'Verified'.
    If it says 'Failing' then your PC bloke is spot on. Be grateful that you were able to get everything backed up. Otherwise proceed…
    Select your OS volume 2nd down in the left hand box, then click the 'Repair Disk' button. Leave Disk Repair to run, If it reports that repairs were made select 'Repair Disk' again until you get the message that the Volume appears to be OK. If DU reports at any time that it could not repair then third party utilities may be necessary or, irrespective of the S.M.A.R.T. status report, your HD may be shot. Try the above for starters and report back.
    Best of luck,
    Adrian

  • Help with new hard drive and data recovery

    I have a macbook pro 13" from early 2011...last week the hard drive crashed and after a few hours at the genius bar had to got  tekserv to recover my data and get a new hard drive and update to 8GB of Ram.  When I got my macbook back I was given an external hard drive that had everything from my old hard drive saved by the users on the old hard drive.  I was hoping I could just transfer the user over to the new hard drive but since I had to restart the computer as a new computer I am not able to just reassign my old profile as the new one on this laptop.  Maybe I've done something wrong but at this point I transferred all my documents over, moved my music and pictures over but I have a few things I can't figure out that I'm hoping someone can help with.
    1. Do emails that were in my mail program from both gmail and my verizon.net program get saved somewhere or do I have to just assume those were lost?
    2. my iTunes library is now there but none of my playlists are there.  Should those have been saved somewhere in my iTunes folder that I should see them?  I'm concerned about syncing my iPhone or iPads to iTunes without those there.
    thanks for the help.

    Here's the spec page on your PB.  http://www.everymac.com/systems/apple/powerbook_g4/stats/powerbook_g4_1.25_15.ht ml  It came with OS 10.2.7 installed. The max OS is Leopard 10.5.x
    Tiger install DVDs are in short supply. Tiger is no longer available at the Apple Store but may be available for $129 by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753). For other sources, do a Google search for MA453Z/A (10.4.6), MA190Z/A (10.4.3) and M9639Z/A (10.4). Also look on eBay. Be sure & buy a retail version (black with silver X) and not a model specific version (gray) (See http://discussions.apple.com/thread.jspa?threadID=1976068 Can I use another Mac's system restore disc on my Mac?.
    Also check these web stores: http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=19521  http://www.allmac.com/shop/index.php?cPath=5_10003
    After you install the base 10.4.x, update to the final Tiger version 10.4.11. Here's the link for the 10.4.11 combo update http://support.apple.com/kb/TA24901?viewlocale=en_US
    Look at this link Mac OS X v10.4 Tiger Installing Software Support Page
    http://www.apple.com/support/tiger/install/
    You can also download the Tiger Installation and Setup Guide
    http://manuals.info.apple.com/en/Tiger_Install_Setup_Guide.pdf
     Cheers, Tom

  • Need Help with External Hard drives and too much music

    I am not terribly tech-savvy, and I need your help. I have a G5 PPC dual processor with an internal 250GB drive. I have two seagate firewire/USB2 external hard drives. One is 250GB and one is 350GB. I want to know how to use them to get my Mac to run faster and better.
    My original hard drive is 7GB shy of being full. Almost half of this is my itunes library which is over 100GB. The older (250GB) hard drive has about 150GB of photos/videos.
    My Mac is running slow as molasses and when I power up the external hard drives it slows down to what I recall my original Mac Plus ran like.
    I use the G5 primarily to work with photos, illustrations and creating the occasional DVD with video and photos. the apps I use most often are Photoshop, Illustrator and Painter. I always listen to music while work.
    I hope all of this information is helpful! Here is my question:
    What is the best way for me to set up and use these external hard drives to return my G5 to its original blazing (to me) fast speed?
    PPC G5 Mac OS X (10.4.9)

    I think you should look at adding two 500GB internal drives. I'd say Maxtor MaxLine Pro for cost, but they also run much warmer (43ºC even when nearly doing zilch) so I'd go with WD RE2 500GB for $40 ea. more.
    dump whatever you don't need, trash anything that is hogging space and is just temp file or useless cache. Web browsers can leave behind a ton of small files eating up tens of MBs.
    Use SuperDuper to backup/clone your drive.
    Disk Warrior 4 to repair (after it gets to 15% free, or just forget for now).
    A 250GB drive formats to 240GB and you have ~3% free it looks like.
    For every data drive plan to have two backup drives.
    Keep your boot drive to 40% used.
    And your data drive to 60%.
    Backups can go a little higher.
    Drives are cheap and inexpensive, especially for the space and performance. And they have improved SATA over the years it has been out.
    By doing a backup followed by erasing your drive, and then restoring it, using SuperDuper, which optimizes the organization, skips copying temp files that aren't needed, it also defragments your files. I would do backup daily to different sets that you "rotate." And before any OS update. And do the erase and restore probably every 2 months.
    Make sure you keep one drive partition somewhere that is just your disk utility emergency boot drive that is not a copy of working system, used for doing repairs like running Disk Warrior and Disk Utility.
    You may need to repair; backup; even erase and restore your external drives. Rather than spend on vendor made case, just pick up a good FireWire case either with drive, or bare (and add your own). I think it'd add 500GB FW drive though.
    Why?
    To begin backup of your current drive. To leave your other FW drives "as is" for now.
    Then install a new internal 500GB drive as well so you now have a good current backup, and you have moved your data off 250GB to 500GB. If anything happens, you have one off line FW backup.
    Then begin to clean up, organize, and get your FW drives working. It sure sounds like they have had some directory or file problems.
    You can find a lot of Firewire and SATA drive choices over at OWC:
    http://www.macsales.com/firewire/

  • Mac Pro Compatibility With Older SATA Drives And DVI Connectors

    I soon plan to replace my 5 year old G5 with a new Mac Pro and need two questions answered so that I will know what options i have for the transfer of older data and apps. The Apple web site for the Mac Pro includes the following paragraph which gives me reason for concern:
    Your Mac Pro includes four drive bays, allowing you to configure it with
    up to 8 terabytes of storage using 7200-rpm Serial ATA 3Gb/s drives, up
    to 2 terabytes of storage using high-performance solid-state drives, or
    any combination of each type of drive. Configure each drive bay
    separately.
    Does the phrase "using 7200-rpm Serial ATA 3Gb/s drives" mean that the Mac Pro will ONLY work with 3Gb/s drives or that it performs best with 3Gb/s drives?
    I currently have two internal SATA 250/300 GB Maxtors (Maxtor 7Y250M0 and Maxtor 6B300S0... both are 7200 RPM but I don't know the data transfer speed). Ideally I would get a Mac Pro with a single 1 TB drive, move one or both of these older SATA drives to the new computer, one temporarily and the other permanently in order to transfer data and Apps to the new machine. If this is not possible then the new machine will need to wait until after I get a new larger FW external drive to use as a data transfer medium (I had planned to do that anyhow). I need to do some advance planning for this so I need to know what to expect in advance. I noticed this possible wording ambiguity on Apple's description of the Mac Pro long ago, but now I need to find out the answer for sure. Apple, you need to be more specific with your words.
    Can anybody answer this question for me?
    My second question regards display connectors. Does the standard (no bucks added) display card include a standard DVI connector or only the newer Mini-DVI connectors. I think I see a standard DVI connector in the low res picture of the back of the Mac Pro but am unsure. My 5 year old Apple display bit the dust a year ago and I had to replace it with an HP 2009m display (mumble grumble) which does use a standard DVI connector. A new Apple display is too rich for my blood so I plan to continue using the HP display for now and need to find out if I will need a display adapter to go with it.
    Many thanks to anyone who can answer these questions authoritatively.
    For anyone who asks why I still run 10.3.9 on my G5, I can only answer response speed. New OS versions always act like a lead anchor on a machine with their added overhead and Tiger really does feel like a ball and chain tied to me... it just does not reaspond as fast as I do. I look forward to the speed of a new machine.
    Phil Rogers
    --

    Does the phrase "using 7200-rpm Serial ATA 3Gb/s drives" mean that the Mac Pro will ONLY work with 3Gb/s drives or that it performs best with 3Gb/s drives?
    Any commercial sATA drive will do just fine. 7200 RPM is not a requirement.
    WD "Green" drives have caused user complaints about "long delay until ready" when installed inside a Mac Pro, but are fine for backups.
    You are making the leap from PowerPC to Intel Mac. Eventually, you should re-initialize your old drives to GUID partition table for best responsiveness.
    Migrating your System will not be possible. Use the pre-installed System or Install a new System on a GUID-partitioned drive with the release DVD in the box.
    Migrating your Applications is a Bad Idea. You should plan on re-installing all your third-party Applications from their release discs.

  • Help with RFC sender, Program And RFC Destination

    Hi!!
    my scenary is asynchronous
         RFC Sender -> SAP-XI -> Oracle reciever
    I have a problem with abap, especially rfc, program and rfc destination. The connection with SAP-XI exist and SAP-XI  receive the message but the message is empty.
    1. In my program on the line
              CALL FUNCTION 'ZBAPI_SD_PED_ORD_SERVIC' DESTINATION 'ZXI_ENVIAR_PED_ORD_SERVIC'
              catch an error system_failure = 2 and it dont execute the rfc ZBAPI_SD_PED_ORD_SERVIC
    2. I rewrite my program, that line to
              CALL FUNCTION 'ZBAPI_SD_PED_ORD_SERVIC' STARTING NEW TASK 'NEW' DESTINATION 'ZXI_ENVIAR_PED_ORD_SERVIC'
              catch an error communication_failure = 1 but the rfc ZBAPI_SD_PED_ORD_SERVIC is executed but no send to SAP-XI
    3. I rewrite my program, that line to
              CALL FUNCTION 'ZBAPI_SD_PED_ORD_SERVIC' IN BACKGROUND TASK DESTINATION 'ZXI_ENVIAR_PED_ORD_SERVIC'
              No error but it dont execute the rfc ZBAPI_SD_PED_ORD_SERVIC and the message in SAP-XI is empty, display the tables but not the row. i check the table PED_ORDEN and RETURN but the controls fields dont are afected.
    What is my Error?
    Where am i making a mistake?
    RFC
    FUNCTION zbapi_sd_ped_ord_servic.
    *"Interfase local
    *"  TABLES
    *"      PED_ORDEN STRUCTURE  ZSD_RFC_T04
    *"      RETURN STRUCTURE  ZSD_RFC_R06
      TABLES: zsd_ped_orden, zsd_rfc_r01.
      DATA: tb_ped_orden LIKE zsd_ped_orden  OCCURS 0 WITH HEADER LINE,
                     tb_rfc_orden_error LIKE zsd_rfc_r01 OCCURS 0 WITH HEADER LINE.
    *Get Pedido by Ordenes
      SELECT  *  INTO CORRESPONDING FIELDS OF TABLE tb_ped_orden
              FROM zsd_ped_orden
              WHERE estatus  EQ  space.
      LOOP AT tb_ped_orden.
        MOVE-CORRESPONDING tb_ped_orden TO ped_orden.
        APPEND ped_orden.
        tb_ped_orden-estatus = 'X'.
        tb_ped_orden-fecha_actualiz = sy-datum.
        tb_ped_orden-hora_actualiz = sy-uzeit.
        MODIFY tb_ped_orden.
      ENDLOOP. 
      MODIFY  zsd_ped_orden FROM TABLE tb_ped_orden.
      COMMIT WORK.
    *Errors in Ordenes
      SELECT  *  INTO CORRESPONDING FIELDS OF TABLE tb_rfc_orden_error
              FROM zsd_rfc_r01
              WHERE estatus  EQ  space.
      LOOP AT tb_rfc_orden_error.
        MOVE-CORRESPONDING tb_rfc_orden_error TO return.
        APPEND  return.
        tb_rfc_orden_error-estatus = 'X'.
        tb_rfc_orden_error-fecha_actualiz = sy-datum.
        tb_rfc_orden_error-hora_actualiz = sy-uzeit.
        MODIFY tb_rfc_orden_error.
      ENDLOOP.
      MODIFY  zsd_rfc_r01 FROM TABLE tb_rfc_orden_error.
      COMMIT WORK.
    ENDFUNCTION.
    PROGRAM
    REPORT  ZBAPI_SD_PED_ORD_SERVIC.
    DATA: ped_orden LIKE ZSD_RFC_T04 OCCURS 0 WITH HEADER LINE,
          return LIKE ZSD_RFC_R06 OCCURS 0 WITH HEADER LINE.
    CALL FUNCTION 'ZBAPI_SD_PED_ORD_SERVIC' DESTINATION 'ZXI_ENVIAR_PED_ORD_SERVIC'
         TABLES
              ped_orden             = ped_orden
              return                = return
      EXCEPTIONS
        communication_failure = 1
        system_failure        = 2
        OTHERS                = 3.
    IF sy-subrc <> 0.
      MESSAGE 'error' type 'I'.
    ENDIF.
    COMMIT WORK.
    RFC DESTINATION
    RFC Destination: ZXI_ENVIAR_PED_ORD_SERVIC
    Connection TYpe: TCP/IP Connection
    Register Server Program: ZBAPI_SD_PED_ORD_SERVIC
    Gateway host: host00
    Gateway service: sapgw00

    hi
    For rfc sender adapter we hv to do some settings .Please chk whether this settings are well configured or not.
    a) RFC destination
    b) RFC channel in the XI directory
    This weblog is a response to a few question about the basic configuration of the RFC sender adapter
    that were posted on the XI forum (and also on my e-mail)
    So here we go, basically we have to configure 2 things:
    a) RFC destination
    b) RFC channel in the XI directory
    RFC destination:
    1. To create the RFC go to TCODE: SM59
    2. Create new destination of type T (TCP/IP)
    3. Make sure you select Registered Server Program option before writing your program ID
    4. Write you program ID (remember it's case-sensitive)
    5. In the gateway host and gateway service write the values of your "Application system" - business system (not the XI server)
    7. No configuration in the J2EE administrator nessecary
    Now we can proceed to RFC channel configuration:
    1. Enter your Application Server
    2. Your Application Server Service
    3. Enter your Program ID from the RFC destination
    And we're done:)
    Now you can test the RFC destination in SM59 to see if it works.
    Please chk this following link.
    1. RFC Processing with the RFC Adapter
    http://help.sap.com/saphelp_nw04/helpdata/en/25/76cd3bae738826e10000000a11402f/content.htm
    2. Configuring the Sender RFC Adapter -
    http://help.sap.com/saphelp_nw04/helpdata/en/67/6d0540ba5ee569e10000000a155106/content.htm
    3.  /people/swaroopa.vishwanath/blog/2006/12/28/send-rfc-to-sap-xi-150-asynchronous
    regards
    Manas

  • I need help with my text tone and I have ring tone. no text tone for the 4s.

    I need help with my text tone. I have ring tone no text tone. I have a 4s.

        Hi Sarar2333!  Let's get your text tones working again!
    Here's a link with instructions how to enable and change your alert sounds for your text/notification settings on your iPhone 4S: http://vz.to/1stiF8a.  You can ensure text tones are enabled by selecting a tone in the "Text Tone" setting.  Let me know how that works out for you.  Thanks!
    AnthonyTa_VZW
    Follow us on Twitter @VZWSupport

  • Help with submit button, signatures and locking fields

    https://acrobat.com/#d=sCcToPsLqquP0uePmVL1pQhttp://https://acrobat.com/#d=ZsRL5CeME*4iV3VHnvUFXw
    Well here's a doozy for ya. I have no idea what I'm doing as you will be able to see when you look at my form.
    What I want to happen is to have the user fill out the form, choose the operations manager and select submit button associated with the drop down box. All other dropdown boxes and submit buttons should be hidden. I need the form to lock so there are no edits except the signature field, the next dropdown box and submit button. I'd like to customize the email with a specific subject line and specify the email address based on the person selected from the drop down box. I'd like this to repeat itself until there are no more signature fields left. It is very important that this document follow the order specified.
    I tried to use an example Niall put out there to use regular buttons as submit buttons with script. I changed a couple things and it worked to submit the form based on the person selected but I still do not know how to lock the fields. Long story short, I broke what did work and don't know how to do what I really want to do or fix what had once worked. I don't understand javascript so please, if you're willing to help teach me, be patient and spell it out like i'm speaking a foreign language.
    Oh boy, even I don't want to do this. What a mess!

    I believe that you should re-post this in either the Forms or the Designer forum.  You are more likely to get the right folks to look at it there.
    Generally this forum is for building custom Document Service Component (DSC) plugins that extend the LiveCycle ES server side product.

  • Need a little help with Slimbox (Lightbox clone) and Spry data sets

    Hello guys!
    First of all let me say that I'm not a programmer in any way,
    shape or form, and somehow I managed to build me a dynamic
    thumbnail gallery that reads data from an XML file and displays it
    on my webpage using a Spry data set and a slider widget (yay!)
    This is of course only thanks to the many great examples
    provided by the Adobe Spry team, and me being stubborn enough to
    keep at it, even though I don't really understand what I'm doing :D
    But I got to this point where I have basically everything
    working, except that I can't get the Slimbox (Lightbox clone)
    script to work with the Spry-generated thumbnail gallery.
    From what I could understand from other threads on this
    forum, is that I need to add an observer somewhere, only that I'm
    not sure where and how (those threads are pretty old and the
    examples aren't available anymore).
    I'm sure you guys know what I'm talking about, anyway, here's
    what I got so far:
    http://www.riotdesign.com.ar/misc/gallery/test1.html
    I have the thumbnail gallery populated from the external XML
    file, a basic page navigation using the Sliding Panels widget, and
    the Slimbox script which works only on the static test image.
    Okay I guess that's it for now, sorry for the long post and
    of course any help with this will be GREATLY appreciated :)
    Thanks & bye!

    Kev,
    Where exactly does the .evalScripts = true; text need to go?
    Does it go in the href call?
    <a href="ManageNotes.asp" title="Manage Notes" onClick="this.blur();
    Modalbox.show(this.href, {title: 'Manage Notes', width: 575}); return false;">View your notes.</a>
    Thanks for any assistance.
    J Bishop

  • Help with MIRO Badi's and Translation Date (Exchange Rate Date Reference)

    Dear experts
    This is a problem I have read a lot about, but none of the answers work properly and I wanted to create a new thread in order to try to compile a final answer for this problem (at least in version 6.0)
    As you know Standar SAP uses posting date as translation date in MIRO for foreign currency.
    This is not always true (imagine Crude Imports with 3 dates: Invoice date, posting date and Bill of Lading date. The last one happens to be the fiscal date for exchange rate in my county and the other two are also mandatory).
    I am proposing thus to use 3 dates: Document date as invoice date; posting date as posting date and Invoice Receipt Date
    (REINDAT - RBKP) as Bill of Lading date. I would like to implement this third date as translation date.
    Lot of ways to do it, but none works properly as for the end user it is complicated to enter data in a certain way so that BADI's work properly. I have implemented note 574583 and only works with some restrictions.
    I have also used some more BADI's like MRM_HEADER_CHECK, FI_TRANS_DATE_DERIVE, INVOICE_UPDATE,... and all of them have some restrictions (depending always in data header taps data introduction or saving the exchange rate properly in MM TABLES but not in FI TABLES).
    I would really appreciate if anyone could help with this, ensuring that the Badi get's always the data and makes it work with no screen selection dependance.
    Thanks in advance.

    Dear All,
    I have found the solution with the help of ABAPer. The system has a bug for which SAP has given a  Sap Note no 22781.
    Actually what happened in the Invoice is, the system by default fetched the exchange rate for the Exchange Rate Type 'M' for the rate last maintained. Since we were using different Exchange rate it did not match. Also we came to know about the difference only because off-late the users had stopped updating Exchange Rate 'M' .
    The funny part is in the Invoice if we click on each tab at the header and come back to the first tab where we find the Exchange rate for accounting, the system picks up the actually rate as per the Exchange Rate maintained.
    Regards,
    Karthik.

Maybe you are looking for