Help with Blurry Photo after file move

Please help. I created a brochure in ID and then moved the file to another folder. I opened up ID again and now one of the images is blurry. What happened??

ID lost the link. Open the links panel and see if it just needs top be updated or if you need to find and relink the image.

Similar Messages

Help with 'disappeared' photos after migration to new macbook pro

So I got a lovely new macbook pro and successfully seem to have migrated everything from my old G4 powerbook. But, when I go into iphoto all 3,000 plus pictures have only the slash dotted outline and no images. Any suggestions as how to remedy this. Terence Devlin, you were kind enough to try to help me when I was having trouble with getting my pictures to export edited but we never did figure out the problem, so if you're out there and remember me maybe you can advise me here, as I don't know if anything I did in attempting to resolve that issue would impact the situation now. The pictures still exist on the other computer so it's nothing dire but it's weird to have everything look like it's there (in otherwords, the whole thing is set up exactly as my old one was, with the same albums etc.) but no actual pictures inside.... Thank you!!

To anwser my own question:
Had to highlight my User Home in finder, and then had to add myself as a user (and click the cogwheel to apply to all files within) and allow myself to 'Read and Write' in permissions.
For some reason, when I migrated across, it didn't add me as a user - even though I was the administrator of both the old and the new MBP!

I need help with the photo stream. Everytime I try to open it on my PC it says photo stream is unable and I have tried everuthing to enable it but it doesn't work. Any help, please?

I need help with the photo stream. Everytime I try to open it on my PC it says photo stream is unable and I have tried everuthing to enable it but it doesn't work. Any help, please?

Freezing, or crashing?
ID on the Mac can produce reports that may (or may not) prove helpful in diagnosing the problem. I suspect this is something not directly related to InDesign, and maybe not to any of the Adobe apps directly since you seem to be having a problem in more than one. That often inidcates a problem at the system level.
Nevertheless, it won't hurt to try to gather the reports. You'll find driections for how to generate them, and to post them on Pastebin.com (then put a link to them here) so we can see what's going on at Adobe Forums: InDesign CS5.5 Not Responding
Do you happen to run a font manager? If so, which one, and waht version?

Can anyone help with uploading photos from iPad to Facebook. Thanks

Can anyone help with uploading photos fom iPad to Facebook? Thanks

What app are you to trying to use ? You can't upload photos to Facebook via Safari, but a number of the Facebook apps support it e.g. the 'official' app : http://itunes.apple.com/us/app/facebook/id284882215?mt=8 (thought it's optimised for the iPhone/iPod Touch it does support uploading photos), Friendly For Facebook (http://itunes.apple.com/us/app/friendly-for-facebook/id400169658?mt=8)

Help with converting a Nero file

I have previously converted a dvd insert designed with Nero into a pdf using adobe acrobat in order to send to someone else. When I tried to do the same thing today with a new Nero designed insert the conversion wouldn't work. The message said adobe didn't support the program that created the file. Any ideas?

thanks for your response.
When I create a dvd insert or cd label etc using Nero the file extension is nct - nero cover template. The printer wants the file as a pdf as he can't open Nero files. I have version 9.3 of acrobat.
Date: Mon, 18 Jan 2010 21:43:47 -0700
From: [email protected]
To: [email protected]
Subject: help with converting a Nero file
Nero is simply a CD/DVD burning application and should have no effect on the type of files that will eventually be on the CD/DVD.
What type of files are you trying to convert and exactly how are you trying to convert them? Plus, it would help to know the version of Acrobat you are using.
>

I had to put my computer by together without migration or time machine I NEED help with order of the files?

I had to put my computer by together without migration or time machine I NEED help with order of the files?

Hi, where are these other files exactly?

Help with putting photos on my ipod!!!

i need help with putting photos on my 20 gig ipod. Model number is MA079LL. and i have versions 1.1 what is the up to date version?

anyone help?

Help with Publishing to a File - Photo Albums don't appear

I published to a file. I tested it and it looks good. I burned the folder to a CD in order to view it on another computer - specifically a PC. My webpages look right, but the photo albums don't appear. I can manually open the folders on the CD and verify that the photo jpg files are there. Any ideas? I am using iWeb 2.0.2.

Are you transferring the index.html file along with the website folder and double clicking the index file to launch the site in the PC browser?

Help with quality of exported files

The problem: I'm trying to get a good quality, 34 minute movie onto a DVD with chapter markers separating individual short films. This is supposed to be a compilation of 8 family movies, in addition to an introduction and credits at the end. Four movies are old movies made in iMovie and are .m4v files. Four were made in FCE earlier this year. I linked everything together in a Master Sequence, putting pauses in between each with some livetype text files to introduce each video. The m4v files were imported and placed in the master sequence. The others are nested sequences. I put chapter markers at the beginning of each section. My intention was to export this one master sequence as a quick time movie, then put it into iDVD.
It worked, but the quality was horrible! Everything became grainy, even the movies I had previously created in FCE. This was very disappointing. So I expertimented with a few things, and here’s what I found.
When I exported a quicktime movie, the quality degraded. It became grainy. Also, it changed the aspect ratio and stretches everything horizontally, as if to take a standard size screen and stretch it to a widescreen. It did this even with the original movies I had made in FCE. I don’t like building self contained movies using this mode because the file sizes are too big, so when I export I tend to use quick time conversion. In this case, I was hoping a non-self contained movie would merely point to all the original content and not add compression artifacts (or something like that). It turns out it made it worse.
When I tried to export a quicktime conversion, 640x480 VGA, best quality, H.264, the machine couldn’t do it. It ran for an hour or so and then crashed. Twice. That is for the entire movie. When I export individual clips (3-6 minutes) it works. The quality is good for movies made in FCE, not as good for imported m4v movies made long ago in iMovie, but better than what I get exporting quicktime movie files, either self contained or not. This is surprising to me, because I was expecting the export quick time movie command to produce the best quality. Also, I’m concerned that if I was able to create this, iDVD would not see any chapter markers anyway.
So there is a problem either way. Experimenting has led me to discover several questions/issues which need answering:
Issue #1: Why can’t I get a quick time movie of the same quality as what I see on the canvas, using the quick time movie export command? On a side note, the user's manual says something about a settings pop up menu where you can deselect the "recompress all frames" option. I can't seem to find this, and was thinking maybe that would help.
Issue#2: Why do m4v files which are very high quality in iTunes suddenly become poor quality when imported into a sequence? Seems to be an import problem, because the movies are already grainy when they’re on the canvas. I thought about making XML files and importing them that way, but the original project files in iMovie are gone.
Issue #3: Why do I end up with a stretched picture if I export quick time movies and there are mixed aspect ratio contents in the sequence (the m4v files are widescreen, the others are not)? More important, how to I get FCE to not do this?
Issue #4: When I export movies using quick time movie (not conversion), the grainy movies actually look better when played in VLC. They also look good when opened with FCE. How can I get that kind of quality in quick time, or at least in iDVD? Perhaps that would solve my problem.
Thanks for any help you can provide.
E

Thanks for the response. I’m not fluent with codecs or video compression, so this project quickly became more trouble than I expected.
It turns out the nested sequences are not H.264, the compression field is blank for the nested sequences. I double checked and the other properties are correct. Sorry about that. The other movies, though, (ones built in iMovie for iTunes) are H.264.
These four . m4v movies are in 960x540 and 480 x 272 because of the way they were exported in iMovie (Share -> Export Movie opens a menu with four sizes: Tiny 176 x 144, Mobile 480 x 272, Medium 640 x 360, and Large 960 x 540).
I just imported the final products (what was exported from iMovie) as clips into FCE. Sounds like I should not be doing that. The original media is on my computer, but not the iMovie project files, and for what I’m trying to do it’s just not worth the time to rebuild the movies in FCE.
Bottom Line: Here’s the current status of the project:
All eight of the movies, by themselves, play well in quicktime. I can put all of them on a DVD, and they still play ok. I wanted to string them all together in one sequence, with some transitions in between (creating a “Play All” option on the DVD). That’s why I nested the sequences, and imported the movies made from iMovie, than added chapter markers. Unfortunately, putting these different types of media together and asking the computer to make one sequence is creating a mess. So I’m sticking with Plan B and putting the movies on a DVD without trying to merge them into a single track.
A few follow up questions…
Out of curiosity, when you say “convert everything to QuickTime DV NTSC 720x480 at 29.97fps with 48k audio,” do you mean the original media (all of the bits of video and stills that came from the camera) or the edited sequences I’m currently working with? As a lesson learned, should I be changing properties of clips before importing them to FCE, so the source material has consistent aspect ratios?
The still images, though they are huge, show up with much better quality than the movies (which is expected, and I’m ok with). So I get a product which includes both video and still images, where the images are very sharp and the movie portions are a bit grainy (because they were taken on a small digital camera). If I change the size on the stills, won’t that just bring the still image quality down?
I’m still baffled at why using the export quick time movie command makes a video of lower quality than when using quick time conversion (in other cases as well, not just this project). In every case, I’ve got digital pictures and movies from my digital camera, and some text in FCE or LiveType files on top of that, usually with additional audio tracks.

Help with recovering photos in LR3

I was backing up some photos from my LR folders, when I accidentally deleted some.
I downloaded a file recovery program and was able to recover the photos. However, one of the particular group of photos, I'm having extreme difficulties with. I can see their previews in LR, but when clicked on it the photo says "file is missing or corrupt" OR the photo changes to one from another session. They had the same file name, was the older one somehow overwritten? Can I still recover those older photos? I've tried everything I can think of and am reaching dead ends. ANY help will be greatly appreciated.

Yea, it doesn't seem like the recovery programs were able to recover them.
No, I've tried them in other programs, and even sent the found files to other photographers, and they're having the same problems.

Help with placing photos in Lightroom 4.2

I am making my first book in the Book module and I'm not finding it as flexible as I expected. I'm slowly figuring out some answers to the questions that have arisen, but I'd like some help with the following.
1. Can I add a small photo to the last page above the logo?
2. Can I put a border around a photo on the front, like a frame? Or do I have to prepare a jpg in Photoshop Elements with the frame and my photo?
3. Can I move or resize those yellow-bordered placement boxes, or make a custom layout if none of the layouts are exactly what I want?
Answeres to these questions will take a lot of frustration out of the process. :-)
Thanks,
Nancy

Camera? Is it supported? There is a tutorial here which may help http://www.youtube.com/watch?v=AYs8WbTbJCk

Needing help with crashing PhotoShop after Yosemite OS Update

I updated to the new Yosemite OS and was using PhotoShop CS5.1, and now the program crashes after trying to open more than one photo at a time. I have cleared all settings and updated everything I can update. I can't revert back to my old OS because it wasn't backed up before doing so. Is there a solution to this?

Chris, I was not able to help with this Yosemite CS3 problem, but I did ask for a crash report. If you have time can you go over it?
Another yosemite issue
Gene

Problems with old photos after upgrading to iPhoto 08

Normally I am very good about backing up my photos. I had iPhoto06 for a couple of years, and had updated all of my photos through the end of 10/08. I got iPhoto08 at the end of December (yes...wish I waited) and installed it before backing up my November and December photos. Now for some reason, I can't do anything with the photos from that two month period. If I click to open the thumbnail pictures in iPhoto it just shows a big exclamation point. When I open package contents it does not show any photos that I already had in my iPhoto06 library, although the thumbnails all appear when I open iPhoto. The only reason I can access the other old files is because they had been independently backed up. I can't export, drag and drop and or do anything with the files from that two month period. Any suggestions?

Sounds like your database file has been damaged:
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

Help with oracle listner after trying to change the hostaname on Fedora 9

After searching high and low on the internet for help with this error I am coming here for a little assistance with this issue. A week ago I tried to change the hostname of my machine and the connection to my Db stopped working.
When I type lsnrctl status I get the following messages
TNS-12537: Tns Connection closed
TNS-12560: Tns protocol adapter error
TNS-00507 Tns connection closed
Linux Erro: 29 Illegal seek
Then when I try to run netca I get a java vm error sigsev. Can anyone provide assistance.
This is on an 11g installation
Thanks
Edited by: user5599027 on Jan 27, 2009 2:24 PM

Here is my /etc/hosts file
>
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost localhost
192.168.0.195 localhost
Ive reverted everything in an attempt to get it back and running to no avail. And the user I am using is the same user that installed the product
>
-rwxr-x--- 1 ldhasty ldhasty 187 2007-05-08 00:03 shrept.lst
drwxr-x--- 2 ldhasty ldhasty 4096 2008-06-08 15:53 samples
-rwxr-x--- 1 ldhasty ldhasty 200 2008-06-08 16:01 sqlnet.ora
-rwxr-x--- 1 ldhasty ldhasty 379 2009-01-27 11:07 listener.ora
-rwxr-x--- 1 ldhasty ldhasty 322 2009-01-27 17:11 tnsnames.ora
>
-rwxr-x--- 1 ldhasty ldhasty 136437 2008-06-08 16:01 lsnrctl

Help with Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.

This was all working yesterday, but this morning, I cannot run in the dev fabric, or even setting the website project as a startup project directly, I get the following error:
Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.BadImageFormatException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'msshrtmi' could not be loaded.
=== Pre-bind state information ===
LOG: User = Andrew-VAIO\Andrew
LOG: DisplayName = msshrtmi
(Partial)
WRN: Partial binding information was supplied for an assembly:
WRN: Assembly Name: msshrtmi | Domain ID: 3
WRN: A partial bind occurs when only part of the assembly display name is provided.
WRN: This might result in the binder loading an incorrect assembly.
WRN: It is recommended to provide a fully specified textual identity for the assembly,
WRN: that consists of the simple name, version, culture, and public key token.
WRN: See whitepaper http://go.microsoft.com/fwlink/?LinkId=109270 for more information and common solutions to this issue.
LOG: Appbase = file:///C:/Users/Andrew/Desktop/Beko2011Azure/Website/
LOG: Initial PrivatePath = C:\Users\Andrew\Desktop\Beko2011Azure\Website\bin
Calling assembly : (Unknown).
===
LOG: This bind starts in default load context.
LOG: Using application configuration file: C:\Users\Andrew\Desktop\Beko2011Azure\Website\web.config
LOG: Using host configuration file:
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\v4.0.30319\config\machine.config.
LOG: Policy not being applied to reference at this time (private, custom, partial, or location-based assembly bind).
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/Temporary ASP.NET Files/root/cb955b02/eef106e2/msshrtmi.DLL.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/Temporary ASP.NET Files/root/cb955b02/eef106e2/msshrtmi/msshrtmi.DLL.
LOG: Attempting download of new URL file:///C:/Users/Andrew/Desktop/Beko2011Azure/Website/bin/msshrtmi.DLL.
ERR: Failed to complete setup of assembly (hr = 0x8007000b). Probing terminated.
Stack Trace:
[BadImageFormatException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +0
System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +39
System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks) +132
System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +144
System.Reflection.Assembly.Load(String assemblyString) +28
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +46
[ConfigurationErrorsException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +618
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +209
System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +130
System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +178
System.Web.Compilation.BuildManager.GetPreStartInitMethodsFromReferencedAssemblies() +94
System.Web.Compilation.BuildManager.CallPreStartInitMethods() +332
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +677
[HttpException (0x80004005): Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +9079228
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +97
System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +258
Note that the dev machine is x64 Win7.
I have not tried deploying this to staging since the issue started as I'm a bit nervous of touching the staging/live environment until this is solved.
Removing the PlatformTarget element from the project file has no effect
Removing the msshrtmi.dll file from the bin directory of the website project ends up with
'Could not load file or assembly 'Microsoft.WindowsFabric.Common, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified'
I have used Git to revert to the last working build to no effect (But I don't have the obj/bin folders in GIT), but it has atleast reset the project files etc.
If I return msshrtmi.dll to the bin folder and switch the model and website projects to x64 there is no change
If I switch both to x86 then I get an error Could not load file or assembly 'BekoModel2011' or one of its dependencies. An attempt was made to load a program with an incorrect format.
which is the model project - presumably because to run on my x64 machine I need the 64bit version?
I really need to be able to debug and then publish some changes ASAP.
Andrew

Hi,
Is it true that you're using IIS to host the application? Could you check whether the process is x64 or x86 one via task manager or config in IIS manager?
http://blogs.msdn.com/b/rakkimk/archive/2007/11/03/iis7-running-32-bit-and-64-bit-asp-net-versions-at-the-same-time-on-different-worker-processes.aspx
Allen Chen [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Help with Blurry Photo after file move

Similar Messages

Maybe you are looking for