Help with BPM
Hi all
Im new to BPM, we have a scenario where we have two files that needs to be picked up, I want to transform both files into one structure. Im not sure how to go about all the steps that need to be taken.
I created 2 outbound message interfaces and 2 abstract message interfaces for the 2 files that needs to be picked up, 1 inbound message interfaces and 1 abstract message interfaces for the transformation message.
In the BPM I start with a fork with 2 receive steps, outside the fork i have a transform step after the transform step i have a send step. Can anyone tell me if this is correct?
How do I go about configering the Integration Directory? Where do I specify my BPM do I need to do this in the Receiver Determination,Interface Determination,Sender Agreement,Receiver Agreement?
Any Help will be appreciated or any online documentation.
Regards
Hi All,
I created the scenario from you guys help it seems fine, But it doesnt go to the transformation step.
in sxmb_moni it just shos the two incomong files with errors:
<SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
<SAP:Stack>Message interface is not used by this process</SAP:Stack>
I've gone through the scenario and everything looks oki.
Any ideas why I will ge this error?
Regards
Similar Messages
-
Hi,
I am doing a File - File using BPM.
I sent a file and its getting picked up and I could see a checkered flag in Moni.
But file is not present in target folder.
When I have monitored receieved CC, It has not received message from BPM at all....
how do I proceed from now on to monitor my scenario?
regards,
Nikhil.hi,
Please check the status of the BPM process in SXI_Cache. The status should be 0.
check this thread also for some info..
Re: bpm monitoring
Thanks,
Vijaya -
Help with BPM Enterprise on WLS JDBC Errors
All,
We are seeing a consistent stream of errors when contacting external resources (Web Services, and Applications) during an exception handling flow and on the "happy path". The WLS logs do not show anything, the BPM engine logs continue to throw the error below:
An error occurred while accesing the database. Detail:SQL statement: 'unknown' Caused by: Unexpected exception while enlisting XAConnection java.sql.SQLException: Transaction rolled back: Transaction timed out after 30 seconds BEA1-0097C7E283E25C8E0272 at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1418) at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1330) at weblogic.jdbc.wrapper.JTAConnection.getXAConn(JTAConnection.java:189) at weblogic.jdbc.wrapper.JTAConnection.checkConnection(JTAConnection.java:64) at weblogic.jdbc.wrapper.Connection.preInvocationHandler(Connection.java:92) at weblogic.jdbc.wrapper.Connection.prepareStatement(Connection.java:482) at fuego.jdbc.FaultTolerantConnection.prepareStatement(FaultTolerantConnection.java:541) at fuego.server.persistence.jdbc.JdbcInstanceExceptionPersMgr.getAllExceptions(JdbcInstanceExceptionPersMgr.java:304) at fuego.server.persistence.jdbc.JdbcInstanceExceptionPersMgr.getAllStack(JdbcInstanceExceptionPersMgr.java:392) at fuego.server.persistence.jdbc.JdbcInstanceExceptionPersMgr.create(JdbcInstanceExceptionPersMgr.java:58) at fuego.server.persistence.Persistence.createException(Persistence.java:677) at fuego.server.execution.microactivity.utils.ExceptionUtils.setExceptionToInstance(ExceptionUtils.java:130) at fuego.server.execution.microactivity.ComponentExecutionMicroActivity.handleUserDefine(ComponentExecutionMicroActivity.java:153) at fuego.server.execution.microactivity.ComponentExecutionMicroActivity.handleException(ComponentExecutionMicroActivity.java:138) at fuego.server.execution.microactivity.ComponentExecutionMicroActivity.execute(ComponentExecutionMicroActivity.java:97) at fuego.server.execution.microactivity.MicroActivityEngineExecutionHandler.executeActivity(MicroActivityEngineExecutionHandler.java:57) at fuego.server.execution.ImmediateActivity.execute(ImmediateActivity.java:42) at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304) at fuego.transaction.TransactionAction.startNestedTransaction(TransactionAction.java:527) at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:548) at fuego.transaction.TransactionAction.start(TransactionAction.java:212) at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123) at fuego.server.execution.DefaultEngineExecution.executeAutomaticWork(DefaultEngineExecution.java:62) at fuego.server.execution.EngineExecution.executeAutomaticWork(EngineExecution.java:42) at fuego.server.execution.ToDoItem.executeAutomaticWork(ToDoItem.java:251) at fuego.ejbengine.ItemExecutionBean$1.execute(ItemExecutionBean.java:212) at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304) at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470) at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551) at fuego.transaction.TransactionAction.start(TransactionAction.java:212) at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123) at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66) at fuego.ejbengine.ItemExecutionBean.processMessage(ItemExecutionBean.java:198) at fuego.ejbengine.ItemExecutionBean.onMessage(ItemExecutionBean.java:110) at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466) at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371) at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327) at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4547) at weblogic.jms.client.JMSSession.execute(JMSSession.java:4233) at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3709) at weblogic.jms.client.JMSSession.access$000(JMSSession.java:114) at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5058) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) fuego.transaction.DatabaseException: An error occurred while accesing the database. Detail:SQL statement: 'unknown' at fuego.server.persistence.jdbc.JdbcInstanceExceptionPersMgr.getAllExceptions(JdbcInstanceExceptionPersMgr.java:335) at fuego.server.persistence.jdbc.JdbcInstanceExceptionPersMgr.getAllStack(JdbcInstanceExceptionPersMgr.java:392) at fuego.server.persistence.jdbc.JdbcInstanceExceptionPersMgr.create(JdbcInstanceExceptionPersMgr.java:58) at fuego.server.persistence.Persistence.createException(Persistence.java:677) at fuego.server.execution.microactivity.utils.ExceptionUtils.setExceptionToInstance(ExceptionUtils.java:130) at fuego.server.execution.microactivity.ComponentExecutionMicroActivity.handleUserDefine(ComponentExecutionMicroActivity.java:153) at fuego.server.execution.microactivity.ComponentExecutionMicroActivity.handleException(ComponentExecutionMicroActivity.java:138) at fuego.server.execution.microactivity.ComponentExecutionMicroActivity.execute(ComponentExecutionMicroActivity.java:97) at fuego.server.execution.microactivity.MicroActivityEngineExecutionHandler.executeActivity(MicroActivityEngineExecutionHandler.java:57) at fuego.server.execution.ImmediateActivity.execute(ImmediateActivity.java:42) at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304) at fuego.transaction.TransactionAction.startNestedTransaction(TransactionAction.java:527) at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:548) at fuego.transaction.TransactionAction.start(TransactionAction.java:212) at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123) at fuego.server.execution.DefaultEngineExecution.executeAutomaticWork(DefaultEngineExecution.java:62) at fuego.server.execution.EngineExecution.executeAutomaticWork(EngineExecution.java:42) at fuego.server.execution.ToDoItem.executeAutomaticWork(ToDoItem.java:251) at fuego.ejbengine.ItemExecutionBean$1.execute(ItemExecutionBean.java:212) at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304) at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470) at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551) at fuego.transaction.TransactionAction.start(TransactionAction.java:212) at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123) at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66) at fuego.ejbengine.ItemExecutionBean.processMessage(ItemExecutionBean.java:198) at fuego.ejbengine.ItemExecutionBean.onMessage(ItemExecutionBean.java:110) at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466) at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371) at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327) at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4547) at weblogic.jms.client.JMSSession.execute(JMSSession.java:4233) at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3709) at weblogic.jms.client.JMSSession.access$000(JMSSession.java:114) at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5058) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: Transaction rolled back: Transaction timed out after 30 seconds BEA1-0097C7E283E25C8E0272 at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1418) at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1330) at weblogic.jdbc.wrapper.JTAConnection.getXAConn(JTAConnection.java:189) at weblogic.jdbc.wrapper.JTAConnection.checkConnection(JTAConnection.java:64) at weblogic.jdbc.wrapper.Connection.preInvocationHandler(Connection.java:92) at weblogic.jdbc.wrapper.Connection.prepareStatement(Connection.java:482) at fuego.jdbc.FaultTolerantConnection.prepareStatement(FaultTolerantConnection.java:541) at fuego.server.persistence.jdbc.JdbcInstanceExceptionPersMgr.getAllExceptions(JdbcInstanceExceptionPersMgr.java:304) at fuego.server.persistence.jdbc.JdbcInstanceExceptionPersMgr.getAllStack(JdbcInstanceExceptionPersMgr.java:392) at fuego.server.persistence.jdbc.JdbcInstanceExceptionPersMgr.create(JdbcInstanceExceptionPersMgr.java:58) at fuego.server.persistence.Persistence.createException(Persistence.java:677) at fuego.server.execution.microactivity.utils.ExceptionUtils.setExceptionToInstance(ExceptionUtils.java:130) at fuego.server.execution.microactivity.ComponentExecutionMicroActivity.handleUserDefine(ComponentExecutionMicroActivity.java:153) at fuego.server.execution.microactivity.ComponentExecutionMicroActivity.handleException(ComponentExecutionMicroActivity.java:138) at fuego.server.execution.microactivity.ComponentExecutionMicroActivity.execute(ComponentExecutionMicroActivity.java:97) at fuego.server.execution.microactivity.MicroActivityEngineExecutionHandler.executeActivity(MicroActivityEngineExecutionHandler.java:57) at fuego.server.execution.ImmediateActivity.execute(ImmediateActivity.java:42) at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304) at fuego.transaction.TransactionAction.startNestedTransaction(TransactionAction.java:527) at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:548) at fuego.transaction.TransactionAction.start(TransactionAction.java:212) at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123) at fuego.server.execution.DefaultEngineExecution.executeAutomaticWork(DefaultEngineExecution.java:62) at fuego.server.execution.EngineExecution.executeAutomaticWork(EngineExecution.java:42) at fuego.server.execution.ToDoItem.executeAutomaticWork(ToDoItem.java:251) at fuego.ejbengine.ItemExecutionBean$1.execute(ItemExecutionBean.java:212) at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304) at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470) at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551) at fuego.transaction.TransactionAction.start(TransactionAction.java:212) at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123) at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66) at fuego.ejbengine.ItemExecutionBean.processMessage(ItemExecutionBean.java:198) at fuego.ejbengine.ItemExecutionBean.onMessage(ItemExecutionBean.java:110) at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466) at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371) at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327) at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4547) at weblogic.jms.client.JMSSession.execute(JMSSession.java:4233) at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3709) at weblogic.jms.client.JMSSession.access$000(JMSSession.java:114) at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5058) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1343) at weblogic.jdbc.wrapper.JTAConnection.getXAConn(JTAConnection.java:189) at weblogic.jdbc.wrapper.JTAConnection.checkConnection(JTAConnection.java:64) at weblogic.jdbc.wrapper.Connection.preInvocationHandler(Connection.java:92) at weblogic.jdbc.wrapper.Connection.prepareStatement(Connection.java:482) at fuego.jdbc.FaultTolerantConnection.prepareStatement(FaultTolerantConnection.java:541) at fuego.server.persistence.jdbc.JdbcInstanceExceptionPersMgr.getAllExceptions(JdbcInstanceExceptionPersMgr.java:304) ... 37 more
Any insight would be appreciated. The WLS and BPM configuration appears correct.
TIA,
IGSYou need to increase the JTA timeout value in WLS to something higher (like 300). Some of the BPM engine transactions take longer than Weblogic's default.
Please refer to the following document in MetaLink for details:
Doc ID: 780946.1 -
Need help with scenario BPM Http-RFC Sync/async bridge
hi all!
i've got the following scenario: HTTP-BPM(XI)-RFC synchronous both of them. for that, i'm using S/A bridge in the BPM, but i'm getting the error 'Timeout condition of pipeline reached'. i think the problem is that the process gets lost in the sync/async communication, because in the trace level shows CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV" and after that every message are 'wait time starting'.
don't know the reason of the error. Maybe I missed something to configure?
the BPM is like this:
Receiver(Open Sync/Async bridge) -> Transformation (mapping from http request to RFC request) -> SyncSend (RFC request and response) -> Transformation (mapping from rfc response to http response) -> Send (Close S/A Bridge)
the IR is configured like this:
Message Types u2013 External Definitions u2013 Imported Objects
mt_cxml_request -> contains xsd of xcml request template.
mt_cxml_response -> contains xsd of xcml response template.
zintegracion_pedidos -> imported RFC from R/3
zintegracion_pedidos.response -> imported RFC from R/3
Message Interfaces
mi_cxml_request_async_abs
mi_cxml_request_sync_abs
mi_cxml_request_sync_out
mi_xcml_response_async
mi_rfc_request_asyn_abs
mi_rfc_request_sync_abs
mi_rfc_request_sync_in
mi_rfc_response_async_abs
Message Mappings
mm_cxml_request_to_rfc_request -> mapping from http request (cxml) to rfc request.
mm_rfc_response_to_cxml_response -> mapping from rfc response to http response (cxml).
Interface Mappings
im_cxml_request_async_abs_to_rfc_request_async_abs
im_rfc_response_async_abs_to_cxml_response_async_abs
and the ID is configured like this:
Business system DES -> created business system for RFC adapter with interface mi_rfc_request_sync_in as receiver. Comunication channel u2018RFC Receiveru2019
Businnes service VW -> created businnes service for HTTP adapter with interface mi_cxml_request_sync_out as sender. Comunication channel u2018HTTP Senderu2019
Receiver Determination
two receiver determinations. One for BPM and the other one for RFC(R/3):
|VW| mi_cxml_request_sync_out:
|BPM_PO| mi_rfc_request_sync_abs:
Interface Determination
two interface determinations:
|VW| mi_cxml_request_sync_out | | BPM_PO:
|BPM_PO| mi_rfc_request_sync_abs | * | * :
Sender Agreement
VW
mi_cxml_request_sync_out
Receiver Agreement
|BPM_PO| |DES| mi_rfc_request_sync_inhi all,
i've removed the transformations from the BPM, and i've created:
in IR:
- interface mapping: im_xcml_request_to_rfc_request_sync_abs
source interface: mi_cxml_request-sync_abs
target interface: mi_rfc_request_sync_abs
in ID:
- receiver determination: |VW| mi_cxml_request_sync_abs
sender service: VW
interface: mi_cxml_request_sync_abs
receiver: DES
interface mapping:im_xcml_request_to_rfc_request_sync_abs
- interface determination: |VW| mi_cxml_erquest_sync_abs ||
sender service: VW
interface: mi_cxml_request_sync_abs
inbound interface: mi_rfc_request_sync_abs
interface mapping: im_xcml_request_to_rfc_request_sync_abs
- receiver agreement: |VW| |DES| mi_rfc_request_sync_abs
sender service: VW
receiver service: DES
receiver interface: mi_rfc_request_sync_abs
not sure these are the steps i had to do for mapping xml to rfc. but the result is the same error as before, the timeout.
i couldn't test with RTW because i'm getting an error 401 unauthorized.
i'd do it without BPM but the issue is that i wanted to add another step that would be to send the response from rfc to mail too once i got this BPM running. i mean, the response from RFC would be sent to http response and mail both.
the only way i can imagine to do it is with BPM but i'm really fed up with it.
thank u very much folks -
hi experts
can u send me the blogs of file 2 -doc with bpm (bpm collect pattern etc) and user defined functions in file 2 idocHi,
User Defined Function are not generic,
It depends on what you are trying to do and the requirement,.
Please take a look at this link for some examples,
http://help.sap.com/saphelp_nw04/helpdata/en/22/e127f28b572243b4324879c6bf05a0/content.htm
Regards,
Bhavesh -
Hello there,
I need help with BPEL project.
i have created a table Employee in Database.
I did create application, BPEL project and connection to the database properly using Database Adapter.
I need to read the records from the database and convert into xml fomat and it should to go approval for BPM worklist.
Can someone please describe me step by step what i need to do.
Thanks,
DpsRead the Demo examples given with Oracle BPEL Process Manager.
I am now at a proficient level in BPEL in the past 1 year,
still need to reach the excellent mark.
Thanks & Regards,
Gopal D. Kalsekar
Sr. Software Developer
Business Solutions (eGroup)
M.H. Alshaya Company W.L.L.
www.alshaya.com
Jai Maharashtra
P :- (965) 224 3598
F :- (965) 224 2488
E :- [email protected] -
Urgent help with simple BPEL process for reading data from database
Hello there,
I need help with BPEL project.
i have created a table Employee in Database.
I did create application, BPEL project and connection to the database properly using Database Adapter.
I need to read the records from the database and convert into xml fomat and it should to go approval for BPM worklist.
Can someone please describe me step by step what i need to do.
Thx,
DpsI have created a table in Database with data like Empno,name,salary,comments.
I created Database Connection in jsp page and connecting to BPEL process.
It initiates the process and it goes automatically for approval.
Please refer the code once which i created.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@page import="java.util.Map" %>
<%@page import="com.oracle.bpel.client.Locator" %>
<%@page import="com.oracle.bpel.client.NormalizedMessage" %>
<%@page import="com.oracle.bpel.client.delivery.IDeliveryService" %>
<%@page import="javax.naming.Context" %>
<%@page import="java.util.Hashtable" %>
<%@page import="java.util.HashMap" %>
<%@ page import="java.sql.*"%>
<%@ page import= "jspprj.DBCon"%>
<html>
<head>
<title>Invoke CreditRatingService</title>
</head>
<body>
<%
DBCon dbcon=new DBCon();
Connection conn=dbcon.createConnection();
Statement st=null;
PreparedStatement pstmt=null;
Hashtable env= new Hashtable();
ResultSet rs = null;
Map payload =null;
try
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.evermind.server.rmi.RMIInitialContextFactory");
env.put(Context.PROVIDER_URL, "opmn:ormi://localhost:port:home/orabpel");//bpel server
env.put("java.naming.security.principal", "username");
env.put("java.naming.security.credentials", "password");//bpel console
Locator locator = new Locator("default","password",env);
IDeliveryService deliveryService =
(IDeliveryService)locator.lookupService(IDeliveryService.SERVICE_NAME );
// construct the normalized message and send to Oracle BPEL Process Manager
NormalizedMessage nm = new NormalizedMessage();
java.util.HashMap map = new HashMap();
st=conn.createStatement();
out.println("connected");
String query1="Select * from EMPLOYEE";
rs=st.executeQuery(query1);
/*reading Data From Database and converting into XML format
so that no need of going to BPEL console and entering the details.
while (rs.next()){
String xml1 = "<AsynchBPELProcess1ProcessRequest xmlns='http://xmlns.oracle.com/AsynchBPELProcess1'>"+
"<Empno>"+rs.getString(1)+"</Empno>"+
"<EmpName>"+rs.getString(2)+"</EmpName>"+
"<Salary>"+rs.getString(3)+"</Salary>"+
"<Comments>"+rs.getString(4)+"</Comments>"+
"</AsynchBPELProcess1ProcessRequest>";
out.println(xml1);
nm.addPart("payload", xml1 );
// EmployeeApprovalProcess is the BPEL process in which human task is implemented
deliveryService.post("EmployeeApprovalProcess", "initiate", nm);
// payload = res.getPayload();
out.println( "BPELProcess CreditRatingService executed!<br>" );
// out.println( "Credit Rating is " + payload.get("payload") );
//Incase there is an exception while invoking the first server invoke the second server i.e lsgpas13.
catch(Exception ee) {
//("BPEL Server lsgpas14 invoking error.\n"+ee.toString());
%>
</body>
</html>
Its working fine.And i want it for Bulk approvals.please help me step by step procedure if any other way to implement this. -
XML file to Proxy Scenario with BPM - ID Steps
Hi Guys,
Any one can help me to find about the scenario XML file to ABAP Proxy with BPM, ID steps please. Any link or logical routing, receiver determination and interface determination idea. Please correct me,
I have created Business Service as sender to send one xml file to BPM, BPM is sending a message to SNC system. I have created 2 receiver determinations, but I am confusing in interface determination, where to declare OM?
Please can any one respond bit quicker.
Thanks in advance
Regards
SanES Repository
*Service Interfaces*
Create one outbound service interface for XML file.
Create one Inbound synchronous Interface for SNC system.
Create one Abstract Asynchronous interface ,same message type as you used for outbound service interface .This is for Integration process receive step.
Create one Abstract async interface for receiving the response from SNC system in Integration process.
Create one Abstract synchronous interface to be used in the Integration process for Send sync step.
Create on inbound asyn service interface for sending the response from integration process (received from SNC system) to the Receiver System.
Operation Mapping.
Create an Operation Mapping using Abstract sync interface and inbound syn interfaces.
Integration Process
start--->receive Step---->send Synchronous step----->send step.
Create two container elements
first with abstrat async interface for the XML request.
second for abstract asyn interface with the XML response structure (asyn receiver system structure)
In the send sync step select your abstract syn interface from the F4 help.and select the corresponding request and response message from the container element you defined earlier.
Integration Directory.
Create one sender File adapter Communication channel for XML file reading.
Create two receiver communication channel for sync system(receiver XI adapte for ABAP PROXY) and other for asyn receiver system .
Create 3 receiver determination
1.from sender to Integration process.
2.from Integration process to SNC system.
3. from Integration process to Asyn Receiver System.
Create 3 Interface determination.
Specify Operation mapping while you are creating interface determination from Integration Process to Syn BS.
Create one sender agreement
Create two Receiver agreement.
Regards
Kubra Fatima. -
Problem in simple filetofile scenario with BPM
Hi
I am a starter to XI. I am implementing simple file2file scenario with BPMs.
But I am getting error while looking into SXMB_MONI.
Under "Monitor for Processed XML messages"
Number of XML message Found 3 (which is my input 3 xmls which is fine) but
"Status is RED Flag".
"Error Category: BPE_ADAPTER"
"Error ID: UNKNOWN_MESSAGE".
Please help me out with this problem.
Regards
SamHi Raj,
When i click PE getting following error:
"Unable to perform action for selected message".
When i double click the row, it takes me to xml message versions where i can RED FLAG for "Call Adapter". In the trace i foudn the below at the end:
<trace level =1 type=system error> error exception return from pipeline processing"</trace>
Hope this helps to guide me mroe
sam -
Integration of OBIEE Dash Boards with BPM Process
Hi ,
Could you please help me in integrating OBIEE Dash Boards with BPM . I thought of using 2 ways :
1) Integrating OBIEE with ADF First and then Integrating ADF with BPM . Its a long process but any other way if any one can help me .
2) Integrating OBIEE with BPM directly by generating webservices . but i couldnt get any options to generate the webservices for OBIEE .
Can anyone please guide me on this .
Thank you,
Sashank P.Check these links may help you.
http://docs.oracle.com/cd/E21764_01/bi.1111/e16364/actions.htm
http://gerardnico.com/wiki/ide/eclipse/eclipse_how_to_consume_a_webservice_with_wtp#the_result
http://gerardnico.com/wiki/dat/obiee/web_service -
IDoc to Soap, with BPM - Permanent error in BPE inbound processing
Hi Experts,
IDoc to Soap, with BPM - > Permanent error in BPE inbound processing
How to rectify this any issue???
Thanks-
skHi,
The inbound processing encountered a permanent error and the queue therefore stopped.
The error message "Permanent error in BPE inbound processing" may be caused by the following:
- At the start or when you process a process instance, the inbound processing encounters an exception that was not handled. This exception is triggered, for example, by a transformation step, a synchronous send step or a control step but it was not caught in an exception handler branch. If the exception that was not handled occurs in the first transaction of the started process instance, the system does not write the process instance to the database but it sets the queue that has this error message to the error status.
Refer to the help in Note 1082099
- The inbound processing triggers this error if the correlation evaluation shows that a message should be delivered to a process instance that has the status "error". Since delivery to process instances that contain errors is not permitted, the queue is stopped.
Use the simulation of the message delivery in the detail view of the relevant queue LUW to determine the relevant process instance for the affected message and use transaction SXMB_MONI_BPE "Continue Process Following Error" (or transaction SWF_XI_SWPR) to continue. If you cannot continue the process instance, check whether you can logically delete the instance. In this case, use the method that is described in Note 807906 to logically delete a process instance.
Check whether your system contains other process instances that have errors in order to detect similar problems. Use transaction SXMB_MONI_BPE "Continue Process Following Error" or transaction SWF_XI_SWPR.
Use the report RSWF_CRL_MAINTAIN to check all of the correlation instances in question or the relevant process instances that you can reach using "Display Work Item".
- Messages that cannot be delivered because no correlation instance can be found may lead to the error that is mentioned here. Check whether the causes that are outlined in Note 1094028 affect your case.
Hope this will help you.
Regards
Aashish Sinha
PS : reward points if helpful. -
Hi,
Please find details of my scenario.
Oracle(VIEW)
Sender JDBC--> PI--
> RFC request
and RFC response I need to update some other table in Oracle using storeprocedure.
and have one more storeprocesdure to update the View so that I will not get duplicate entry.
I am not using UPDATE statement in JDBC sender communication channel, insted of that to update VIEW I am using storeprocedure.
Please let me know how I can achive it with BPM.
Thanks,
BhupeshHi,
1) If the structure send by JDBC is not acceptable by the BPM then you need one Mapping in JDBC ---> BPM flow.
2) If the structure send by JDBC is same as the receiving structure of BPM then no need of Mapping.
3) You will need one Mapping to map JDBC req message to the RFC req message; one mapping program to convert RFC response to the JDBC stored-procedure message....
So your scenario with mappings will be:
JDBC --> Interface Determination (Mapping Optional as per pt.1) -
> BPM
BPM <-> Interface Determination (Request-Response Mapping) <--> RFC
In the above mapping program your ABS MI of BPM should have below MTs
Req Message -
> Original Message Received from JDBC
Response Message ---> Message which needs to be send to the JDBC stored-procedure.
Now your IN SYNC MI at the RFC end should have below MTs
Req Message ---> RFC request message
Resp Message ---> RFC response massage.
Then in the Interface Detremination of BPM <----> RFC flow develop a IM with below mapping programs:
Request Mapping between ---> MessageFromJDBC_to_RFCRequest
ResponseMapping between ---> RFCResponse_to_JDBCStoredProcedure
BPM -
> JDBCStoredProcedure
For this flow there is no need of Mapping program...
using the above mappings programs you can ensure that there is no Transformation step in your BPM...this is to help you in achieving a good performance out of your BPM...
You need a Syns ABS and Sync IN message Interface for BPM <---> RFC communication.
Regards,
Abhishek. -
SQL JOIN with BPM sql component
Hello friends.
How to use SQL JOIN with BPM sql component?
The tables objects are created but the joined tables belong to different sql components .
I tried something like that, but a error "table doesn't exist" occours.
Ex:
for each element in
SELECT imuImovelCd
FROM IMOVEIS_URBANOS,
Integracao.FGLP.IMOVEIS_PRE_EDITAIS
WHERE IMOVEIS_URBANOS.imuImovelCd = Integracao.FGLP.IMOVEIS_PRE_EDITAIS.ipeImuCd
AND Integracao.FGLP.IMOVEIS_PRE_EDITAIS.ipePedNr = 1
AND Integracao.FGLP.IMOVEIS_PRE_EDITAIS.ipePedAa = 2008
do
extend this.imoveis using cdImovel = element.imuimovelcd,
nrImovel = call(DEC_ENDERECO, codimovel : element.imuimovelcd, tipoimovel : 1)
end
Edited by: user9008295 on 26/01/2010 05:19ok, ok you are right.
When I try use SQL Statement to make a JOIN with 2 tables on different sql objects, BPM returns "table dosn't exists".
So.... I change my code. I dont know if this is the best way to do, but... i hope u, or everyone, can help me to do a best work.
This code works fine.
for each element in
SELECT ipeImuCd
FROM Integracao.FGLP.IMOVEIS_PRE_EDITAIS
WHERE Integracao.FGLP.IMOVEIS_PRE_EDITAIS.ipePedNr = 1
AND Integracao.FGLP.IMOVEIS_PRE_EDITAIS.ipePedAa = 2008
do
for each element2 in
SELECT imuImovelDv
FROM IMOVEIS_URBANOS
WHERE imuImovelCd = element.ipeImuCd
do
extend this.imoveis using cdDvImovel = String(element2.imuImovelDv),
cdImovel = Decimal(element.ipeImuCd),
endereco = call(DEC_ENDERECO, codimovel : element.ipeImuCd, tipoimovel : 1)
end
end
Thx a lot!!! -
Hello All,
I have scenario SOAP to IDoc. I need to use BPM to send email in case PI was not able to send data to ECC.
Can someone please help with the steps required for BPM.
I am very much confused.
Thanks,Hi.
You can work with Alerts PI
Above the blog links:
XI: Alerts - Step by step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
Configuration for forwarding Alerts as Emails
/people/pravesh.sharma/blog/2009/07/02/configuration-for-forwarding-alerts-as-emails
Regards.
Bruno -
Michal's weblog ---How it can be done with BPM ?
HI,
I am trying to do a File To XML multiline scenario using BPM. When I check IP I am getting the following error
<b><u>"Expression must not return a multiline value".</u></b>
How can I do File To XML multiline scenario using BPM ? I know we can do without BPM
Any useful information is appreciated.
Thanks,
ss
Message was edited by:
s sHi Vijay,
I wanted to do Michal's weblog
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
using BPM.
Like file to file with BPM, I have created IP and when I checked, I was getting the above error.
My question---> Is it possible to do multiline scenario with BPM ?
help pls.
Thanks,
ss
Message was edited by:
s s
Message was edited by:
s s
Maybe you are looking for
-
When I am working on a Ai file and SAVE AS pdf for example, a pdf is created in the location I choose and I am still working on the Ai file. I could have sworn that before the file I was working on became the pdf, therefore closing the AI file. I not
-
I have a 110 MB FCP movie file. I want to upload the whole file to vimeo, but am unable to do so in this format. I am unable to export this into another format, it seems, without compressing it. Could someone please tell me how to convert the entire
-
I understand ME59 is used only for automatic PO. What prerequisite ? Can anybody advise ?
-
Portege Z930-10E - broken screen twice in 3 months only
I am laptop user since 12 years. July, 30th I bought my Portege Z930, thinking it was my best decision in many years. Less than a month later, when opening the screen during a flight, its simply broken the screen, making it impossible to use any more
-
How to find business object for particular tcode at particular event
Hi, I want to know how i can find particular business object for particular tcode for certain event? For example suppose for tcode PA40, if i create infotype for employee and when i save it after creating it then it must be stored in certain object.