Help with Bridge CS5 reading RAWs from a  Nikon d7100

So just bought a Nikon D7100, and not Bridge and PS CS5 cannot open my RAW photos. Is there something else I can do, besides upgrading to cs6??
My current version of bridge is 4.1.0.54 and photoshop 12.1

Is there something else I can do, besides upgrading to cs6??
You can either upgrade to at least CS6 because you need at least ACR 7.4 to support your new Camera NEF format and PSCS6 (currently at ACR 8.3 but started with ACR 7) can give you the correct thumbs and previews form NEF or you can use the Free Adobe DNG Converter and first convert the NEF to Adobes DNG and then work on these files in CS5.
Try these links (or do a search on Adobe Downloads if they don's work, many are country specific:
For Mac:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5738
For Windows:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5739

Similar Messages

  • Help with writing and retrieving data from a table field with type "LCHR"

    Hi Experts,
    I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
    Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
    Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
    Thanks in advance,
    C
    SAVING THE LIST DATA TO DB
    DATA: L_WA(800).
    LOOP AT T_TAB into L_WA.
    ZDBTAB-DATALEN = STRLEN( L_WA ).
    MOVE: L_WA to ZDBTAB-RAWDATA.
    ZDBTAB-LINENUM = SY-TABIX.
    INSERT ZDBTAB.
    READING THE DATA FROM DB
    DATA: BEGIN OF T_DATA,
                 SEQNR type ZDBTAB-LINENUM,
                 DATA type ZDBTAB-RAWDATA,
               END OF T_TAB.
    Select the data.
    SELECT linenum rawdata from ZDBTAB into table T_DATA
         WHERE repid = w_repname
         AND rundate = w_rundate
         ORDER BY linenum.
    Populate calling Internal Table.
    LOOP AT T-DATA.
    APPEND T_DATA to T_TAB.
    ENDLOOP.

    Hi Anuj,
    The unicode flag is active.
    When I run our report and then to try and save the list data a dump is happening at the following point
    LOOP AT T_TAB into L_WA.
    As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
    When I try to load a saved list the dump is happening at the following point
    APPEND T_DATA-RAWDATA to T_TAB.
    T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
    In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
    Regards
    C

  • I am trying to update my CS 6 so it can read the RAW from my NIKON D7000 and do get error messages allthe time have tried for a few month now and have not been able and not been able to get any support help either and I think i is realy BAD What to do????

    Cant open my Raw from my NIKON D7000 in Photoshop and cant down load updates get error messages all the time have tried at least ten times and tried to get help from support but not succeeded.
    Very bad I think but what to do????
    Ulf

    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    Mylenium

  • Trouble with Bridge CS5.1

    I am running the latest version of the Lion (10.7.2).
    After the upgrade of Camera Raw Bridge become unstable and useless for me.
    As soon as I try to click on the menu bar the Bridge freeze and it is not possible to do other than using the forced termination (opt / cmd / esc).
    I have reset the preferences, purge the entire Thummbnail Cache and reset to Standard Workspaces.
    I have taken the previous version from backup and made a restart. But the problem is still there.
    Is there anyone else who has experienced this?
    Will a reinstallation of Bridge solve the problem?
    Kind regards
    Venche Jensen.

    I will try to remove the ARC, and then try to revert to the previous version of ARC.
    I have tried to open a raw file via Photoshop. It wount work. I will giv you a feedback when done.
    Sendt fra min iPad
    Den 16. okt. 2011 kl. 18:38 skrev Omke Oudeman <[email protected]>:
    Re: Trouble with Bridge CS5.1
    created by Omke Oudeman in Bridge Macintosh - View the full discussion
    Since the menu bar on top hang too, I think it is a combination of problem the upgrade of Mac OS and Bridge + ACR.
    If you have the option to revert to the previous version of ACR (6.4) and check if this sorted things out it might be helpful for all other users. Personal I have not yet upgraded to Lion (I'm on 10.6.8) and have ACR 6.5 installed. It only gives me the problem that I can't choose an other location for the files in Adobe Photo downloader but that's fine, I always have the same folder i sent them to so that is working for me.
    If you have a back up inTime Machine or other Back Up try to find the 6.4 version. Or check the thread about Photodownloader to see how I retrieved it with re install.
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3973971#3973971
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3973971#3973971. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Bridge Macintosh by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Downloading with Bridge CS5

    Downloading with Bridge CS5
    When I download from my SD card with Bridge, it only stores 9 images into a folder (date named), so I get several folders created all with just 9 images in them!
    How do I reset this to only have one folder created with ALL images in it?

    Are you by any chance taking exactly just 9 shots per day?   Are folders created by date?
    Exactly what version of CS5 are you running? CS5 12.what?
    What's the exact version of your OS?
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Help with opening Adobe Reader and downloading updates

    I can not open Adobe .pdf files any longer (this started yesterday, prior to that I could open adobe files).
    When I double click a .pdf file I get this notice on my screen: Windows cannot access the specified device path or file. You may not have the appropriate permission to access file.
    So I went to the Adobe download site to download a new copy of Adobe.  When I start the download I get this on the screen:  The instruction at "0x0e3a0068" referenced memory at "0x0e3a0068."  The memory could not be written.  Then two options are listed: click OK to terminate or cancel to debug.  So I click on cancel and I get this on my screen: Internet Explorer has closed this webpage to help protect your computer.   A malfunctioning or malicious addon has caused I.E. to close this webpage.
    I don't have AVG running, I do have avast but I've disabled it.  I ran Registry Mechanic and an I.E. erasure program but nothing helps.
    I have gone into I.E. and reduced the security level to its lowest state but no joy.
    So, any ideas or suggestions on what's the problem and how to overcome it would be appreciated.  Thanks, in advance, for your reply.  Jim R.

    Hi Mike..tried that as well but no joy.  A friend of mine was looking at it all and noticed that it was an I.E. thing as far as not letting me redownload the reader so I went to Mozilla Firefox and I could download a new version but....whenever I attempt to open a .pdf file I get that message, "Windows can not open the specified device, path or file. You man not have the appropriate permissions to access the item." 
    Damn...this is irritating as I need to get to some of thos files as I need them for a Journal I'm working on as editor-in-chief. 
    It all worked just fine last Saturday but starting Monday when I was on my flight out to D.C.  no joy. 
    Sigh...Jim R.
    Jim R.
    Date: Tue, 1 Dec 2009 14:50:27 -0700
    From: [email protected]
    To: [email protected]
    Subject: Help with opening Adobe Reader and downloading updates
    Under the help menu, there is an option to repair the installation of reader. Did you try that?
    >

  • How can I open raw files from my Nikon D7100 in CS4 or CS5?

    How can I open raw files from my Nikon D7100 in CS4 or CS5?

    Andy,
    In the simple and short form, what happens with the ACR (Adobe Camera RAW) module is that it gets updated with regularity, to accommodate the camera mfgr's. changes for their newer models. That ACR works within the host program, such as Ps, PsElements, Lightroom, etc.. At a point, Adobe ceases to support older host program versions. When that happens, the user has a few options:
    Upgrade the host program version
    Use another host program, such as PsElements or Lightroom
    Use the free DNG converter, per Curt's suggestion. That is not host program dependent
    Glad that the DNG Converter works for you.
    Good luck,
    Hunt

  • I need help with controlling two .swf's from third.

    Hi, thanks for reading!
    I need help with controlling two .swf's from third.
    I have a problem where I need to use a corporate designed
    .swf in a digital signage solution, but have been told by the legal
    department that it can not be modified in any way, I also can't
    have the source file yada yada. I pulled the .swfs from their
    website and I decompiled them to see what I was up against.
    The main swf that I need to control is HCIC.swf and the
    problem is it starts w/ a preloader, which after loading stops on a
    frame that requires user input (button press) on a play button,
    before the movie will proceed and play through.
    What I have done so far is to create a container swf,
    HCIC_container.swf that will act as Target for the HCIC.swf, and
    allow me to send actionscript to the file I'm not allowed to
    modify.
    I managed to get that done with the help of someone on
    another forum. It was my hope that the following script would just
    start HCIC.swf at a frame past the preloader and play button, and
    just play through.
    var container:MovieClip = createEmptyMovieClip("container",
    getNextHighestDepth());
    var mcLoader:MovieClipLoader = new MovieClipLoader();
    mcLoader.addListener(this);
    mcLoader.loadClip("MCIC.swf", container);
    function onLoadInit(mc:MovieClip) {
    mc.gotoAndPlay(14);
    But unfortunately it didn't solve my problem. Because there
    is a media-controller.swf, that is being loaded by HCIC.swf that
    has the controls including the play button to start HCIC.swf.
    Here's a link to a .zip file with all 3 .swf files, and all 3
    .fla files.
    http://www.axiscc.com/temp/HCIC.zip
    What I need to do is automatically start the HCIC.swf file
    bypassing the pre-loader and play button without editing it or the
    media-controller.swf in anyway. So all the scripting needs to be
    done in HCIC_container.swf.
    I know this is confusing, and its difficult to explain, but
    if you look at the files it should make sense.
    ActionScripting is far from my strong point, so I'm
    definitely over my head here.
    Thanks for your help.

    Got my solution on another forum.
    http://www.actionscript.org/forums/showthread.php3?t=146827

  • I am trying to convert raw files from a Nikon D7100 on CS5 extended. Will the RAW converter 7.4 work on CS5 extended?

    Will Raw converter 7.4 work with CS5 extended? I am trying to open a raw file from a Nikon D7100.

    You can get the free Dng Converter here:
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7.1
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7.1
    This video explains how to use it.
    Camera Raw: How to use Adobe DNG Converter - YouTube

  • Who worked with ICS' Model 4896 GPIB? I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

    I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

    Hello. Most of the engineers in developer exchange are more familiar
    with NI products. Contacting ICS for technical support is a better
    course of action.

  • Help me,  How to read data from USB ???

    Help me, How to read data from USB ???

    If its a disk on key or some portable hard drive than once its connected to the usb and recognized by the system you can access it through java like you would access your hard drive.

  • I need help with adobe iv reader.

    iam trying to pin a website using ie.it says the reader cannot read the website,i am not computer saavy so i donot know how to fix this issue, pls help,tyvm.

    i am trying to pin a website in internet explorer to my task bar,i get a 
    message that adobe v1 could not decode the website, i am not computer saavy
    so i  don't know what that means,plus this is a new computer 4 me.plus it
    worked fine  a few days ago. tyvm 4 ur help.
    regards,
    ray nist
    In a message dated 6/11/2013 9:27:11 P.M. Eastern Daylight Time, 
    [email protected] writes:
    Re: i  need help with adobe iv reader.
    created by Pat Willener (http://forums.adobe.com/people/pwillener)  in 
    Adobe Reader - View the full  discussion
    (http://forums.adobe.com/message/5400013#5400013)

  • Elements 11 will not process RAW files from my Nikon D7100

    Elements 11 will not process RAW files from my Nikon D7100. Ca anyone help?

    My version of ELEMENTS 11 contained an out of date Applications Manager and would not look for updates. After I discovered this (involving much trawling on different websites) I downloaded an up to date version which found Camera Raw v7.4. Happily, this works. Version 8 is not yet available.
    Anyway, thanks for your help.

  • Will elements 11 support camera raw files from my nikon D7100?

    Will elements 11 support my camera raw files from my Nikon D7100?

    Yes, pse 11 should support the D7100 camera raw files with the camera raw 7.4 plugin update.

  • Editing RAW photos from the Nikon D7100

    What software would you recommend using to edit RAW photos from the Nikon D7100?
    Thanks for your help!
    Jake

    Camera
    Raw image filename extension
    Minimum Camera Raw plug-in version required
    Minimum Lightroom version required
    Nikon
    D7100
    NEF
    7.4
    4.4

Maybe you are looking for