Help with "Browse" by Artist

So I think I have a pretty good handle on this whole "Sort Artist" field on the "Sort" tab, but for some reason, it picks random artists names to display from the list of artists that are combined. Example:
Garth Brooks - Friends In Low Places
Garth Brooks & George Jones - Beer Run
Chris Gaines - Snow in July
Garth Brooks & Trisha Yearwood - Wild as the Wind
I set the "Sort Artist" on all four to "Garth Brooks" and it appears in between the "Gap Band" and "Gary Glitter" on my browse as "Chris Gaines" But if I take the "Sort Artist" out of the Chris Gaines file, it changes on the browse to "Garth Brooks & George Jones" and if I take it out of the Beer Run tag, it displays as "Garth Brooks" and not "Garth Brooks & Trisha Yearwood."
[Edit] Just went back and did it again and it did change the browse to "Garth Brooks & Trisha Yearwood" but it didn't do that the first time.
Any thoughts? I just want it to show up as "Garth Brooks" and not anything else.
Message was edited by: Lord_Soto

Yeah, I'm square with how the "artist" and "album artist" fields work... but what I'm saying is that "Garth Brooks" and "Garth Brooks & Trisha Yearwood" and "Chris Gaines" all get subsidized down to one line... either "Chris Gaines" or "Garth Brooks & Trisha Yearwood" on the Browse category... there aren't separate lines for each artist, only one. My problem isn't that the other artists don't show up... it's that just plain old "Garth Brooks" gets replaced by one of the other artist names.
Literally, on my Browse column under category "Artist"
<snip>
Frida
Fuel
The Gap Band
Chris Gaines
Gary Glitter
Gary Pucket & the Union Gap
</snip>
While my songs are listed:
Name: Artist: Album Artist: Sort Artist:
I Know There's Something Frida Frida Frida
Hemorrhage Fuel Fuel Fuel
Early in the Morning The Gap Band The Gap Band Gap Band
You Dropped A Bomb On Me The Gap Band The Gap Band Gap Band
Ain't Going Down Till the Garth Brooks Garth Brooks Garth Brooks
Beer Run Garth & George Jones Garth Brooks Garth Brooks
Way of the Girl Chris Gaines Garth Brooks Garth Brooks
Wild as the Wind Garth & Trisha Yearwood Garth Brooks Garth Brooks
Rock & Roll (part 2) Gary Glitter Gary Glitter Gary Glitter
Young Girl Gary Puckett & Union Gap etc...
Now, what I need is to figure out how iTunes decided to use "Chris Gaines" instead of "Garth Brooks" as the category for all the songs with "Garth Brooks" as the Sort Artist. (because I'd rather have them tagged as "Garth Brooks" for purposes of browsing.

Similar Messages

Help with browser/cache Possible iCloud issue- I think

A few months ago I built a website through Volusion.com. I also bought my domain name through them: whisperingcreektradingpost.com
Shortly afterward I became dissatisfied with their service and chose to move to Shopify.com
In order to move my domain name, I had to transfer it to GoDaddy.com first and then follow Shopify instructions on how to have it point to my new store with them. IP address, etc.
So I did all that, and for a little while it seemed okay, but periodically would still point to the old Volusion store. Today, Shopify told me that I needed to make sure all the setting with them were set correctly and to also add the domain name without the “www” to the list of what would point to the domain name.
Everything in Shopify is now set so that the following three items all point only to the main domain name whisperingcreektradingpost.com
1. whisperingcreektradingpost.com
2. www.whisperingcreektradingpost.com
3. whispering-creek-trading-post.myshopify.com
For the rest of the day and still tonight, I cannot get to my Shopify store at all. Not on either of my desktops, laptop, two iPads, iPhone or iPod. Everything on my network takes me to the old Volusion store when I type in that domain. I even downloaded Chrome and tried that on the three computers, still no success.
Even when I am in my admin section ON the Shopify website, when I input the data for a product, save it, then click the link to view in browser- it STILL takes me to the old Volusion site- even from INSIDE my Shopify admin!!!
Over an hour on the phone with Shopify tech support did not clear it up. I cleared the data on every device on every browser. Restarted every device, etc. My daughter is next door with her own internet service account and can bring up my new site with no problem.
The internet service provider swears they cannot store anything like cookies or cache on the router so it is not on them, Shopify is able to get to my site with no problem. They told me that their only job is to make sure I have a connection to the internet. Period. And that the problem of not getting the ‘right one’ is not something they can help with and if they sent someone out to prove that I would be charged for the service call.
Is it possible that there are cookies/cache on the iCloud that keeps putting the information back on my devices? Is there some way that within my network they are all sending each other the case information before I can clear it?
I am the only one, and every device on my network, that cannot get any browser to go to the new website instead of the old one.
In addition, even with all the updates AND restarting several times, my internet connection is dragging something awful now.
Help.
I am very frustrated.

The browser icon availability is controled by the carrier provisioning. Assuming that you have a BlackBerry specific data plan then your device is properly provisioned. All you should have to do to get the browser icon back is register your BlackBerry on the network.
Go to Options > Advanced Options > Host Routing Table. Press the menu key and select Register Now. If the icon does not reappear after a minute or two them remove the battery for 10 seconds.

Newbie needs help with browser compatibility

Ok, so I'm new at this, so this may be something really
simple, but browser compatibility? I made a site in DW;html and it
shows up perfect in safari but internet explorer and firefox not so
much. I did a browser compatibility test in DW and it says nothing
is wrong with my pages, but obviously something must be!!
On my home page, the image of a house that I have next to the
company name shows up fine in safari but not any other browsers.
And my page layout, everything is moved over funny in other
browsers. Also there are link boxes around the table I created with
different brands of products. On safari the boxes do not show, but
all the other browsers it does!! I'm new at this and frustrated!!!
Need help!!
The link is holmeshifi.com and I posted code from the home
page!

OK thanks Ned sorry to soo dumb I'm on a learning curve here! what
I'm trying to do is go to the URLs of web galleries of images from my
main site
so I would presumably have to rename them on my server? i.e. does that
mean adding the code ", "_blank");
to the files on the server?
At the moment I have to use the back button on my browser window which
takes me back to the main site which then has to reload (tediously!)

Help with browser issue - Acrobat Pro default for PDF

Hello,
I have Acrobat Pro CS3 set as default for reading pdf's, because I often have to edit the pdf's I open. This works fine with pdf's I open from disk.
However, it seems that somehow Acrobat Pro has taken over as default for opening pdf's inside browsers as well. My plugins list in FF shows "Adobe Acrobat 9.1.0.163 Adobe PDF Plug-In For Firefox and Netscape". Whenever I navigate to a page which is a pdf, the entire Acrobat Pro external program opens, displaying a blank page and an error message popup - when I click OK on the error, the application closes and the pdf opens in the browser window - sometimes this requires several tries before it opens in browser.
Here is an image showing the error message and the FF plugin installed: http://terraffirma.com/images/PDF-error.jpg
I have Reader 9 installed on system, and I am downloading Reader 10 just to see if a reinstall will correct this.
Any suggestions on how to set system up with Acrobat Pro as default for opening pdf's from disk, and having browser directly use a plugin?
Thank you.

Thanks Chris - That did EXACTLY what I wanted it to do.
I was able to create a button that prompts the user to save the form, then it hides the price fields, then it flattens, then it e-mails the form. The order was important since I wanted the salesperson to be able to save the "not-flattened" form.
James

Help with browser scrollbar!!

I mean to do a scroll bar like in
this Site
I have a flash movie set to 100% per 100%. It looks great on
1600 per 1200. at a 768 width ressolution it still works but i nee
a scroll bar for the lengh.
Any tutorials on this matter?
Thanks

it sound like you are, i also have a bb curve and love it , but really you should have a icon of earth with a yellow arrow going around it if not you might have to call the blackkberry help desk throught tmobile. after you put your info in say blackberry and it will send you to the blackberry help desk and they are open 24/7 so you can call at any time . it sound like it was deleted or not trun on but you to get the internet on the phone you need to have the internet package from tmobile and you need to have a wireless moden in your home to use it there. i hope this helps, andlet me know if it dose and any thing else i may help you with

Help with Browser Bug

Hi everyone, hope someone can shed some light onto this for
me. I've design a site that works fine in most browsers, but has a
couple of bugs in Firefox.
If you take a look at the sample below in Internet Explorer
& Firefox you can see there are 2 problems.
1. The background image that should repeated in the body
doesn't appear in firefox (so it just displays the b/g colour)
2. The login boxes on the right hand side have expanded out
of the page and I have no idea why!
Any help, would be brilliant.
Heres the site and style sheet:
http://www.annamik.com/
http://www.annamik.com/annamik.css
This is the CSS for the body and login box:
#body {
background: #92ADBB url(images/body.gif) repeat-y;
width: 771px;
margin: 0px;
padding-top: 0px;
padding-bottom: 0px;
padding-left: 0px;
padding-right: 0px;
#body1 {
margin: 0px;
width: 470px;
float: left;
padding-top: 28px;
padding-left: 27px;
padding-right: 28px;
padding-bottom: 28px;
#body2 {
margin: 0px;
width: 189px;
float: left;
padding-top: 22px;
padding-left: 26px;
padding-right: 27px;
padding-bottom: 28px;
.loginBox {
background-color: #CBD8E0;
border: 1px solid;
border-color: #FFFFFF #83939E #83939E #FFFFFF;
padding: 15px 15px 24px 15px;
color:#1B488C;
display: block;
font: bold 10px Verdana, Arial, Helvetica, sans-serif;
line-height: 18px
Cheers
Paul

> 1. The background image that should repeated in the body
doesn't appear in
> firefox (so it just displays the b/g colour)
I see it just fine in FF1.5x.
> 2. The login boxes on the right hand side have expanded
out of the page
> and I
> have no idea why!
There is something inconsistent with your math in the tables
on the right
and the containing box. The widths/padding are pushing the
table much wider
in FF than in IE.
Try doing two things, and you'll see -
1. Add cellspacing="0" to the <table> tag
2. Remove the right and left padding on the td.
The table will now behave properly in both browsers. This
means that you
have sized the table without consideration for the padding in
the cell.
Reset the table width from 189 to 159 and it's going to look
much better
(now you can put the padding back).
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Wanderer Boy" <[email protected]> wrote in
message
news:[email protected]...
> Hi everyone, hope someone can shed some light onto this
for me. I've
> design a
> site that works fine in most browsers, but has a couple
of bugs in
> Firefox.
>
> If you take a look at the sample below in Internet
Explorer & Firefox you
> can
> see there are 2 problems.
>
> 1. The background image that should repeated in the body
doesn't appear in
> firefox (so it just displays the b/g colour)
>
> 2. The login boxes on the right hand side have expanded
out of the page
> and I
> have no idea why!
>
> Any help, would be brilliant.
>
> Heres the site and style sheet:
>
>
http://www.annamik.com/
>
>
http://www.annamik.com/annamik.css
>
>
> This is the CSS for the body and login box:
>
> #body {
> background: #92ADBB url(images/body.gif) repeat-y;
> width: 771px;
> margin: 0px;
> padding-top: 0px;
> padding-bottom: 0px;
> padding-left: 0px;
> padding-right: 0px;
> }
>
> #body1 {
> margin: 0px;
> width: 470px;
> float: left;
> padding-top: 28px;
> padding-left: 27px;
> padding-right: 28px;
> padding-bottom: 28px;
> }
>
> #body2 {
> margin: 0px;
> width: 189px;
> float: left;
> padding-top: 22px;
> padding-left: 26px;
> padding-right: 27px;
> padding-bottom: 28px;
> }
>
> .loginBox {
> background-color: #CBD8E0;
> border: 1px solid;
> border-color: #FFFFFF #83939E #83939E #FFFFFF;
> padding: 15px 15px 24px 15px;
> color:#1B488C;
> display: block;
> font: bold 10px Verdana, Arial, Helvetica, sans-serif;
> line-height: 18px
> }
>
>
> Cheers
> Paul
>

I'm suddenly in need of help with my Firefox browser (6.0.2)

Hi there,
I'm suddenly in need of help with my Firefox browser (6.0.2)
(OS: I use Windows XP).
When I open up the browser, all I see is a completely blank white screen, with all the toolbars at the top.
I know that my physical connections are fine: I've tested the modem, turned the pc off and on etc. and I can also receive/send emails.
This problem started today, 8th September, 2011 and has never happened before.
Is it a coincidence that Firefox updated itself just before I logged off yesterday evening? Could it be something to do with this particular new update?
I've also noted that just before I "open up" Firefox, I now get a small box saying:
[JAVASCRIPT APPLICATION]
Exc In Ev handl: TypeError: This oRoot.enable is not a function
This has never appeared before - I hope it offers a clue a to what is wrong.
The Browser is not stuck in Safe Mode, by the way.
Obviously, I can't search for any solutions to the problem on the internet, as I can't physically see any websites!
(A friend is sending this query on my behalf from their pc)
Any light you could throw on this confusing problem would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.
If the only option is to uninstall Firefox and reinstall it from your site, then I'm also in trouble (I can't see the internet or make any downloads).
In that case, would you be able to send the .exe file as an attachment to my email address? If so, please let me know and I'll give you further details.
Many thanks in advance.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Help with a simple applescript for combining Artist text with Track name

Hi all,
I'd like to put together a simple script that takes the artist names from a list of tracks in iTunes and copies the text to the start of the Title name, followed by " - ".
This is because, e.g. on a classical album, I want the artist names to all be "Classic Collection Gold" but I'd like to keep the artist name contained with the track name. This means when I browse by artist I don't get millions of artists...
I found this script, which does something kinda similar, but I'm new to script writing so not sure how to do it?
So I'd like to change:
Name
Planets: Mars
Artist
Gustav Holst
Ambum:
Simply Classical Gold (Disc 2)
To be:
Gustav Holst - Planets: Mars
Artist
Gustav Holst - Planets: Mars OR BETTER Simply Classical Gold (Disc 2)
Album
Simply Classical Gold (Disc 2)
This script has some ideas in, but I'm not sure how to tweak it....
"Artist - Name Corrector" for iTunes
written by Doug Adams
[email protected]
v1.6 May 17, 2004
-- removed ref to selection
v1.5 April 11 2004
checks if separator string is in name
v1.0 April 2 2004
Get more free AppleScripts and info on writing your own
at Doug's AppleScripts for iTunes
http://www.malcolmadams.com/itunes/
property separator : " - "
tell application "iTunes"
if selection is not {} then
set sel to selection
repeat with aTrack in sel
tell aTrack
if (get name) contains separator then
set {artist, name} to my texttolist(get name, separator)
end if
end tell
end repeat
end if
end tell
-- == == == == == == == == == == == == == == == ==
on texttolist(txt, delim)
set saveD to AppleScript's text item delimiters
try
set AppleScript's text item delimiters to {delim}
set theList to every text item of txt
on error errStr number errNum
set AppleScript's text item delimiters to saveD
error errStr number errNum
end try
set AppleScript's text item delimiters to saveD
return (theList)
end texttolist
Message was edited by: Chipstix

I'm not sure what that script thinks it's doing, but it's essentially doing nothing, so scrub that and start afresh.
The first thing you need is a way to identify the tracks to change - you don't want to do all tracks in the library (they might have already been munged). A good option is to work on the selected tracks:
tell application "iTunes"
if selection is not {} then
set sel to selection
You then need to iterate through those items, changing them one-by-one:
repeat with aTrack in sel
Now comes the easy part - build a list of the elements you want (in this case you want the name, artist, and album of each track:
set trackName to name of aTrack
set trackArtist to artist of aTrack
set trackAlbum to album of aTrack
Now you have the information you need, so reset the fields as appropriate:
set name of aTrack to trackArtist & " - " & trackName
set artist of aTrack to trackAlbum -- or to trackArtist & " - " & trackName, depending on your choice
Now clean up by closing off the repeat and tell blocks:
end repeat
end tell
Putting it all together you get:
tell application "iTunes"
  if selection is not {} then
  set sel to selection
  repeat with aTrack in sel
    set trackName to name of aTrack
    set trackArtist to artist of aTrack
    set trackAlbum to album of aTrack
    set name of aTrack to trackArtist & " - " & trackName
    set artist of aTrack to trackAlbum -- or to trackArtist & " - " & trackName, depending on your choice
  end repeat
end tell

Help with Open Browser Window

I built a site named greenscapepump.com. I used the behavior
"Open Browser Window" that allows a photo to be viewed in a smaller
window. I have it set up to double-click the photo name to go to
the browser window. It works on some computers but not others. I
used the same behavior on other pages in the same web site and it
is working on all computers.
The three pages under the menu "Portfolio" are: Architectural
Fountains, Waterfalls and Streambeds, and Floating Fountains, are
the pages that have problems with this behavior on some computers.
Is this an individual computer problem, or do I need to do
something in Dreamweaver to fix it?

OMG - the code on the architecturalfountains page is a horror
Why do you need to use doubleclick.... most users are
accustomed to clicking
on a link wait for something to happen....
Also, the code for that dropdown is massive... are you really
committed to
that menu?
The validator found quite a few errors on that particular
page - I didn't
test each page (that's up to you :) these errors aren't
helping with your
page load also - one of the pages (can't recall which now)
just kept trying
to load and never did stop... try fixing the errors (some
more important
than others to the well being of your page) and then see
where you are at
with your pages... I'd also suggest changing the
'doubleclick' to just the
one click - really no need for anything else.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fgreenscapepump.com%2Farchitectura lfountains.html%23
Nadia
Adobe® Community Expert : Dreamweaver
http://www.DreamweaverResources.com
|Tutorials|SEO |CSS Templates
http://www.csstemplates.com.au
http://www.adobe.com/devnet/dreamweaver/css.html
CSS Tutorials for Dreamweaver
"texasgranny" <[email protected]> wrote in
message
news:ef9h1v$4h8$[email protected]..
:I built a site named greenscapepump.com. I used the behavior
"Open Browser
: Window" that allows a photo to be viewed in a smaller
window. I have it
set up
: to double-click the photo name to go to the browser window.
It works on
some
: computers but not others. I used the same behavior on other
pages in the
same
: web site and it is working on all computers.
: The three pages under the menu "Portfolio" are:
Architectural Fountains,
: Waterfalls and Streambeds, and Floating Fountains, are the
pages that have
: problems with this behavior on some computers.
: Is this an individual computer problem, or do I need to do
something in
: Dreamweaver to fix it?

Help with CSS browser issue... please!

I posted this issue on the Wordpress forums and am not having
much luck. Since it seems to be a CSS issue, I thought I should
post it here and see if any of you can help me out.
I am having a problem with browser compatibility on my
Wordpress powered blog. I built the template in Dreamweaver and
then spliced it up into the individual blog files.
The blog is at
http://www.babybumps.net/blog
The main problem is that in Mozilla and Safari, the
background wrapper is dropping out right before the navigation bar
(the background disappears). Since this part is still in the header
file, I'm not sure what is going wrong.
I am attaching the code for the index and header. If you need
to see any of the other code, let me know!
Thanks in advance for any help!

ArtsyAndi wrote:
> I posted this issue on the Wordpress forums and am not
having much luck. Since
> it seems to be a CSS issue, I thought I should post it
here and see if any of
> you can help me out.
>
> I am having a problem with browser compatibility on my
Wordpress powered blog.
> I built the template in Dreamweaver and then spliced it
up into the individual
> blog files.
>
> The blog is at
http://www.babybumps.net/blog
>
Hi,
try replacing this for yours.......
#content-wrap {
padding: 0pt;
background: #fff url(images/content-wrap.jpg) repeat-x;
width: 805px;
margin-left: auto;
border-top-style: none;
margin-right: auto;
HTH
chin chin
Sinclair

I need help with a browser problem

I am was given a new iMac G3 (from 2001) which was really never used.I have not yet had any serious problems with it, but really could use some help with a browser problem.
I have 4 different web browsers that needs the macro media flash player update. The browsers I use are internet explorer, iCab, Netscape, and the original Mozilla Firefox.
It would be of great appreciation for the readers of this post to answer my question.
I am also having the problem with installing the plug - ins for the browsers. Thank You For Taking the Time To read This!

Hi, rynodino -
As Tom has suggested, plugins need to be installed in the Plug-Ins folder for the browser.
Typically each browser will have its own Plug-Ins folder, usually located in the same folder containing the browser itself. In order for each of several browsers to access the same plugins, the plugins must be replicated and placed in each of the Plug-Ins folders for each of the browsers. The easy way to do that is to hold down the Option key while dragging a plugin to the new location - a copy (not an alias) of the plugin will be generated at the location it is dragged to.
Most plugins will display a Netscape icon regardless of where they are located - this is normal.
It is not unusual for the installer for a plugin to default its install to the Plug-Ins folder for Internet Explorer. So be it. Just replicate the new plugin to the other Plug-Ins folders as needed.
Note that some plugin installs will involve more than one item. For those, be sure to replicate all items for it. Using labels can help identify what is new, what has been most recently added, in a Plug-Ins folder.

HT201541 I need help with updating my browser.

I need help with updating my browser. Its telling me that Safari is outdated.

That is a very old version belonging to Snow Leopard. I take it you are not actually running Yosemite.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite- System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

Help with CSS rule cross platform browser compatibility

I am an advanced beginner website designer.
The website I need help with is www.sprungtheatre.com
I designed this site on a PC machine. Each page has a
different CSS Background Image rule. The only rule I have set is
image and the "non-repeat." I have not set rules for its placement.
Each of these images had a feather effect applied to it in
Illustrator so the image would fade into the black background. This
works fine on Windows machines in IE and Firefox.
However, on Macs, the left-hand side of the image is chopped
off. Which is to say, it appears if the feathered edge has been cut
off and the image ends abruptly.
Is there any way to fix this problem?
My only guess is that the following my be happening:
The CSS Background Image rule is applied to a nested table
that is editable in a template. I'm thinking that the Mac browswers
are moving the image to the upper left of the overall, "poppa"
table in which the editable region is nested, cutting off that part
of the image that appears in the non-editable region of the "poppa"
table and showing that part of it that appears in the nested,
editable table. I hope that makes sense. Would applying the
placement rules help this? If not, what might?
Many thanks,
Jon

Don't use a fixed background image.
Sorry to break the news but the code is hidous for an
advanced beginner.
Youre sure to run into much trouble unless you are preapred
to take
some time out and learn this stuff correctly.
Using layout mode and spliting and merging tables into all
sorts of
shapes is a seriously bad method and one you should quickly
move away
from for the sake of your own sanity.
zaphron wrote:
> I am an advanced beginner website designer.
>
> The website I need help with is www.sprungtheatre.com
>
> I designed this site on a PC machine. Each page has a
different CSS Background
> Image rule. The only rule I have set is image and the
"non-repeat." I have not
> set rules for its placement.
>
> Each of these images had a feather effect applied to it
in Illustrator so the
> image would fade into the black background. This works
fine on Windows machines
> in IE and Firefox.
>
> However, on Macs, the left-hand side of the image is
chopped off. Which is to
> say, it appears if the feathered edge has been cut off
and the image ends
> abruptly.
>
> Is there any way to fix this problem?
>
> My only guess is that the following my be happening:
>
> The CSS Background Image rule is applied to a nested
table that is editable in
> a template. I'm thinking that the Mac browswers are
moving the image to the
> upper left of the overall, "poppa" table in which the
editable region is
> nested, cutting off that part of the image that appears
in the non-editable
> region of the "poppa" table and showing that part of it
that appears in the
> nested, editable table. I hope that makes sense. Would
applying the placement
> rules help this? If not, what might?
>
> Many thanks,
>
> Jon
>
>
>

Help with importing mp3s into iTunes

Hi, I'm running the newest version of iTunes and having problems loading mp3s into the library in correct order. I'm not sure how the mp3s i want to import are tagged, but when i import them, iTunes arranges them automatically by song name (alphabetically) and loses the track order.
1) how do i import them keeping the same track order (in future)?
2) how can i re-order the existing ones i've imported into the library already as efficiently as possible (without going into the 'get info' option and adding track numbers for each of the separate tracks (i have several thousand like this - they are mainly live concerts)?
Many thanks for any help, its much appreciated!

You don’t say quite enough to be sure if I am being helpful or how much you know, but …
Start in the library window with browse on and select an album. (Click on the little eye, upper right of screen if you don’t see the browser).
You can then use “Get info” to inspect some of your imported tracks for that album. If you click on the info tab, you should see a field for track number. If you have a correct track number in this field, you should be able to sort by track number.
If you don’t see a Track # column to sort on, you and bring it into view by right clicking on the header row (Name, Artist, Album etc) and then checking Track number.
You can sort on any column by clicking the header.
I ripped all my CDs with Free Realplayer and imported the tracks into iTunes when I got an iPod – all the track numbers were already correct.

My iPod does not show all tracks when browsing by artist!

I have recently noticed how by iPod isnt showing all the songs when browsing by artist. I have only discovered this problem with one of my artist, but am not sure that the problem occurs elsewhere. The thing is that i have got around 20 tracks performed by this one artist. About 10 of these tracks are from the same album and the rest of the tracks are without album information. So everytime i enter this artist on my iPod, only the tracks from this album is shown. Hence, the tracks without any album details are not to be found under this artist! However, these songs can stil be found when browsing by genre, songs or the like. So obviously they are all on my iPod, but for some reason only the tracks from the mentioned album are to be found when entering the artist.
What can the problem be and how can it be fixed?
Thanks for your help,
Best regards...

There are usually two things that contribute to songs not appearing under Artist on the iPod, both due to information either in or missing from the Get Info>Info tab against the song in iTunes. 1) the song has no album name associated with it or 2) the song is marked as part of a compilation.
If tracks are missing an Album name in the Info tab, this information needs to be filled in. The no album one is a bit quirky as the songs will appear under certain circumstances but the simplest remedy is just add None or Miscellaneous to all the blanks in place of a title. See this link for more detail: I don't see some of my songs when browsing by artist on my iPod
Also if the tracks are ticked in the Get Info>Info tab as part of a compilation, they may not appear under Artist on the iPod. Highlight a song in iTunes that you know is not appearing correctly on your iPod. Right click on it and choose Get Info and click the Info tab (alternatively choose Get Info from the File menu), if "Part of a Compilation" is marked untick it and afterwards update your iPod, you should find it now appears as normal. Compilations are stored in a separate folder in iTunes so the songs don't appear inside the normal Artist>Album folder.
Message was edited by: Zevoneer

Help with "Browse" by Artist

Similar Messages

Maybe you are looking for