Help with building AMD64 System

Hi ppl
I need some advice please
I am building an AMD64 system for my friend and want advice from anyone (especially those with 64s already)
The motherboard I will build with is the MSI K8N Platinum nForce3 250 with a 3200+ AMD64
The questions are:
1. What is the best cooler to use:
Thermaltake Silent Boost or Zalman 7000 Al/CU
(I am thinking the silent boost as it is £12 cheaper and the performance is close isnt it. The silent boost is very good on my AMD XP and the Zalman is just as good on my P4)
2. What PSU should I use with the AMD64:
Antec TruePower 480W (similar to mine plus seperate rails) or
Enermax EG465AX-VE(W)FCA Diamond Blue 460W
3. What RAM would be best for this motherboard out of these 3:
(Will performance be hit hard if CAS 2.5 is used otherwise CAS 2 is over budget)
Kingmax PC3500 SuperRAM 433Mhz http://overclock.co.uk/customer/product.php?productid=17006&cat=310
Corsair 1GB DDR Value Select PC3200 Kit http://www.overclockers.co.uk/acatalog/Corsair_Value_Select.html
GeIL 1GB (2x512MB) PC3200 Value Dual Channel Kit CAS2.5
http://www.overclockers.co.uk/acatalog/GeIL_Value.html
Cheers Guys for your help. Could ya answer ASAP
Cheers
SAspaz

The Tagan will more than handle a 3200+ and 9800 Pro, are you serious? it will handle anything you can possibly throw at it and not even break a sweat. This PSU is a monster!
Another review: http://www.hexus.net/content/reviews/review.php?dXJsX3Jldmlld19JRD02OTQ=
"The results speak for themselves. Both PSU's were equally able to cope with the testing, each holding close to the target output voltage. The +3.3V and +5V results are the most interesting. The Tagan has discrete supply for each, while the Enermax derives each output voltage from a shared supply. Under load, heavy load on one rail may pull the other rail down too on the Enermax, while theoretically the Tagan should be able to do much better.
The adjusted average figure is derived with peak and trough results removed, stopping them from skewing the results, however it's that peaking of output voltage that can cause a PSU the most problems in supplying clean output. The Tagan, with its return loop, also has an added advantage in high load situations, reducing ripple noise.
While both PSUs seem very competent, indeed I'm proud my long term Enermax did so well, a PSU that takes a newer, refined approach to supplying clean output voltage, like the Tagan, should always win outright.
While it's unscientific at best, the Tagan shines, holding steadfast to the desired voltages on each rail, regardless of load. "
More reviews:
http://www.casemodworld.com/article147.html
"Conclusion
We have all seen power supplies that claim to be 'silent' before. None that I have seen have yet proven to be as good as the Tagan. I had to double check that it was running when I first powered up. The only thing I could hear was the exhaust fan in my case, the PSU was inaudible.
What we like about the Tagan -
* Large Heatsinks
* Excellent Silent Cooling system
* Most silent PSU we have come across
* Lots of molex connectors
* Neater cables due to twisted wires
What we don't like about the Tagan -
* Large mainboard adapter needed
Anyone notice the lack of dislikes? I could only think of one and even that is being picky.
Overall this PSU is simply amazing, the voltages are perfect, is even more silent than I thought and its very reasonably priced. What more could you ask for?"
http://www.themodfathers.jolt.co.uk/?page=&action=show&id=8062
http://modtown.co.uk/mt/review2.php?id=taganpsu

Similar Messages

Help with build

Hi all,
I need a little help with building a new comp and any help will be appericiated.
My wife is a video editor and she needs a new CPU.
She is editing HD films from various cameras (she have several clients).
The budget is around 1500-2000$ for the CPU without screens and software which she already owns.
She is working with CS5.5 and using windows 7 pro 64bit.
I read quite a lot in the past few days and I ended up more confused then I was, this is the setup which I thought of:
CPU:       I was thinking about the i7 960 3.2 (310$) or the i7 2600k (330$).
MB:         Asus p6x8D 1366 ddr 1600
Graphics: Gigabyte nVidia GTX460 1gb gddr5 (210$) or gtx560(230$) the 570 is way off the budget (440$)
BLURAY: Pioneer BDR-206
RAM:      I don't know really.. I was thinking about 12gb but I am cluless about it.
Power:     AX 850W Gold Active PFC 12cm Fan Modular (No particular reason, when I'll know my final setup I'll check the power I need with http://www.extreme.outervision.com/psucalculatorlite.jsp).
Case:      Antec / Thermaltake, No idea which model..
OS HDD: I'm still puzzled weather to go for the small (60gb) ssd for the OS and programs or go for a 7200 rpm hd.
HDD:       W.D Caviar black 1tb 7200 rpm, 64mb, Sata III * 4 with raid on board (Raid 0 or Raid 5? - I'll save it for another thread).
Coolers:   Help needed
Any help will be more then welcomed.
Regards,
Eliran.

While waiting for a specific answer, you might read these recent discussions
http://forums.adobe.com/thread/910208
http://forums.adobe.com/thread/907698
http://forums.adobe.com/thread/762381
http://forums.adobe.com/thread/906848
http://forums.adobe.com/thread/912120
http://forums.adobe.com/thread/912119
And one specific... SSD is high $$ and there is a thread concerning problems... forum search for ssd will find at least 2 message threads about using ssd or not

I need help with my operating system

Okay, little bit of background:
I bought the iMac second hand from a family friend who we no longer have contact with, the operating system etc was already installed.
The disk drive on the mac is broke (I dont have the disks anyway, so it would be no use)
I never purchased the operating system, like I said, it was pre-loaded.
A few programmes weren't running correctly and the computer was just generally running slowly, so I decided to just restore the system as there was no important data on it and it would run faster in the end, and I figured the programmes would run properly again once restored.
Anyway, I unknowingly deleted the operating system in the process of the restore (I thought it would only delete personal data like it does on my windows PC)
I have no restore disk (a broken disk drive anyway), my apple ID was not used to buy the operating system, so therefore it cant be used to restore the operating system, I also never backed up the harddrive externally so it cant be reinstalled from that.
My problem: I have no operating system and no way of recovering it. I read about Mavericks and because its free, I decided to try and download it, but with no operating system, the mac can only run 'Safari' and wont save things I try to download to the harddrive (it just says theres no space and the download doesnt happen). I also tried to access the App Store from Safari to try to download OS X lion on my apple ID, but once again, when using Safari on a mac without an operating system, it is very restrictive and I cant access the download page.
I have no idea what to do and live miles away from the nearest apple store.
Thanks in advance for any help provided by anyone.
Jordan.
Additional information:
Its a 2007 iMac which was running OS X Lion 10.7.4 (I think, it was definitely Lion though).
Serial No. is W8*******X85
<Edited by Host>

Ah. Well, then you have an itty-bitty problem. You need to backup your files to start with. You will need your retail Snow Leopard installer DVD which your friend should have provided to you. If he did not then ask him to bring it to you. It belongs to you along with the original distribution discs that came with computer when it was new.
Do the following once you have the Snow Leopard DVD:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Upgrading to Lion
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
After you sign into your App Store account with your Apple ID click on the Redeem option under Quick Links to download your copy of Lion.
As an aside to this: All actual 2007 iMacs are able to run Mavericks. So rather than buying Lion you may prefer to upgrade to Mavericks which is Free.

Please help with Sun Java System Communications Sync crashe with IEx 7.x

Dear All!
Recently i've upgrade my IExplorer to 7.x version. After that i began to have problems with Communications Sync (latest version). When i try to sync Outlook 2003 with the server (SSL connection/ self signed certificate) the Comm Sync asks if i want to allow to open connection with wrong certificate (happed only after installing IEx 7.x) and then when i press YES it crashes.
Any help on how to fix this problem is appriciated.
Konstantin
P.S.: Adding a self signed certificate to IEx DB and adding the website to the trusted websites list did not help.

Hi,
Not sure how much we can help with this issue - especially if you are already running the latest version of the sync tool. About all I can offer is to uninstall your current sync software and reinstall the latest public version:
http://sunsolve.sun.com/private-cgi/getpatch.pl (search for patch #124734).
If that doesn't help I suggest you log a sun support case for this (assuming you have a sun support contract that is).
Regards,
Shane.

Help with building flash files for streaming

I filmed a product demonstration for a client who wanted to put it on his website. I edited the footage in PremPro CS4 and exported to Media Encoder as F4V file format. After encoding imported footage into CS4 Encore, created timeline, chose, Flash from Format and swf for output. Progressive Download which allows video to begin playing as it is downloaded (I believe), chose destinations and settings. After transcoding I had 1 file folder, Sources that contained the following files _PGC_Bpge_entryPoint_Bbp_1.f4v, and then 3 separate files, *not* in the file folder called Sources. They are
AuthoredContent.xml, FlashDVD.swf, and Index.html.
I submitted all files to client who gave them to web designer. Designer said these were the wrong files and he could not use them. I called designer and basically he said I didn't know what I was doing. I told him he needed all files to put up the flash video. Anyway, am I missing something, doing something wrong? Are there other files he needs? He said he only needed 1 file. Or is it the designer? I'm not thin skinned so if it's me please tell me so, so I don't make the same errors. Thanks. All suggestions/comments are appreciated!

<The client wants a control player, i.e. play, stop, pause, etc., that's it, so the viewer can simply provide the function themselves. This is similar to youtube, blogger, etc.
The web designer can use what you provided, which does what you describe the client wanting. But the web designer may need to integrate what Encore provided onto a web page, and the client may not have made the expectations clear and may not know what is needed. As I said, the Encore to flash player gives almost no options for the player controls and colors etc may be problems.
<Encore did encode the f4v file. When I exported from PremPro what preset should I hve chosen -- mpeg2 DVD, flv/f4v. So the only file he needs in addition to what I gave him is the original f4v file?
I don't know whether the f4v you exported from Premiere was progressive. The f4v from Encore might be fine, or you might need to export from Premiere again.
The other issue is that some "player" with controls needs to be provided by you or the web designer (who may have an issue with the client not getting the designer to lay all this out to begin with). There are several threads about "flv players" you might check out. Does the client have video on his site already? If so, you can figure out what they are using, and it will help with your process.
should I have chosen "flash server" instead of "progressive". i must admit i never did this before. other clients just have me post it to youtube and provide them with embed code.
It depends on what they want.

Help with build in cam

i have msi pc with build in cam
i dont remembar wath the taip m series somthing i have cure 2 duo cpu t5750 2 gb ram 320 gb
giforce 8400
now i dont find any driver for the cam and the pc dos'nt know the cam....
i run vista 32bit
any one can halp me pleas!!!:(:(:(

You have some notebook or? Read >>Posting Guide<<

Help with building a JTree using tree node and node renderers

Hi,
I am having a few problems with JTree's. basically I want to build JTree from a web spider. The webspide searches a website checking links and stores the current url that is being processed as a string in the variable msg. I wan to use this variable to build a JTree in a new class and then add it to my GUI. I have created a tree node class and a renderer node class, these classes are built fine. can someone point me in the direction for actually using these to build my tree in a seperate class and then displaying it in a GUI class?
*nodeRenderer.java
import javax.swing.*;
import javax.swing.tree.*;
import java.awt.*;
import java.net.*;
public class nodeRenderer extends DefaultTreeCellRenderer
                                   implements TreeCellRenderer
public static Icon icon= null;
public nodeRenderer() {
icon = new ImageIcon(getClass().getResource("icon.gif"));
public Component getTreeCellRendererComponent(
JTree tree,
Object value,
boolean sel,
boolean expanded,
boolean leaf,
int row,
boolean hasFocus) {
super.getTreeCellRendererComponent(
tree, value, sel,
expanded, leaf, row,
hasFocus);
treeNode node = (treeNode)(((DefaultMutableTreeNode)value).getUserObject());
if(icon != null) // set a custom icon
setOpenIcon(icon);
setClosedIcon(icon);
setLeafIcon(icon);
     return this;
*treeNode.java
*this is the class to represent a node
import javax.swing.*;
import javax.swing.tree.*;
import java.util.*;
import java.net.*;
* Class used to hold information about a web site that has
* been searched by the spider class
public class treeNode
*Url from the WebSpiderController Class
*that is currently being processed
public String msg;
treeNode(String urlText)
     msg = urlText;
String getUrlText()
     return msg;
//gui.java
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.tree.*;
import java.net.*;
import java.io.*;
import java.util.*;
public class gui extends JFrame implements Runnable
     *declare variable, boolean
     *thread, a object and a center
     *pane
     protected URL urlInput;
     protected Thread bgThread;
     protected boolean run = false;
     protected WebSpider webSpider;
     public gui()
          *create the gui here
          setTitle("Testing Tool");
     setSize(600,600);
     //add Buttons to the tool bar
     start.setText("Start");
     start.setActionCommand("Start");
     toolBar.add(start);
     ButtonListener startListener = new ButtonListener();
          start.addActionListener(startListener);
          cancel.setText("Cancel");
     cancel.setActionCommand("Cancel");
     toolBar.add(cancel);
     ButtonListener cancelListener = new ButtonListener();
          cancel.addActionListener(cancelListener);
          close.setText("Close");
     close.setActionCommand("Close");
     toolBar.add(close);
     ButtonListener closeListener = new ButtonListener();
          close.addActionListener(closeListener);
          //creat a simple form
          urlLabel.setText("Enter URL:");
          urlLabel.setBounds(100,36,288,24);
          formTab.add(urlLabel);
          url.setBounds(170,36,288,24);
          formTab.add(url);
          current.setText("Currently Processing: ");
          current.setBounds(100,80,288,24);
          formTab.add(current);
     //add scroll bars to the error messages screen and website structure
     errorPane.setAutoscrolls(true);
     errorPane.setHorizontalScrollBarPolicy(javax.swing.
     ScrollPaneConstants.HORIZONTAL_SCROLLBAR_ALWAYS);
     errorPane.setVerticalScrollBarPolicy(javax.swing.
     ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS);
     errorPane.setOpaque(true);
     errorTab.add(errorPane);
     errorPane.setBounds(0,0,580,490);
     errorText.setEditable(false);
     errorPane.getViewport().add(errorText);
     errorText.setBounds(0,0,600,550);
     treePane.setAutoscrolls(true);
     treePane.setHorizontalScrollBarPolicy(javax.swing.
     ScrollPaneConstants.HORIZONTAL_SCROLLBAR_ALWAYS);
     treePane.setVerticalScrollBarPolicy(javax.swing.
     ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS);
     treePane.setOpaque(true);
     treeTab.add(treePane);
     treePane.setBounds(0,0,580,490);
     treeText.setEditable(false);
     treePane.getViewport().add(treeText);
     treeText.setBounds(0,0,600,550);
     //create the tabbed window
centerPane.setBorder(new javax.swing.border.EtchedBorder());
formTab.setLayout(null);
errorTab.setLayout(null);
treeTab.setLayout(null);
centerPane.addTab("Search Parameters", formTab);
centerPane.addTab("Error Messages", errorTab);
centerPane.addTab("Website Structure", treeTab);
          //add the tool bar and tabbed pane
          getContentPane().add(toolBar, java.awt.BorderLayout.NORTH);
getContentPane().add(centerPane, java.awt.BorderLayout.CENTER);
          *create the tool bar pane, a center pane, add the buttons,
          *labels, tabs, a text field for user input here
          javax.swing.JPanel toolBar = new javax.swing.JPanel();
          javax.swing.JButton start = new javax.swing.JButton();
          javax.swing.JButton cancel = new javax.swing.JButton();
          javax.swing.JButton close = new javax.swing.JButton();
          javax.swing.JTabbedPane centerPane = new javax.swing.JTabbedPane();
          javax.swing.JPanel formTab = new javax.swing.JPanel();
          javax.swing.JLabel urlLabel = new javax.swing.JLabel();
          javax.swing.JLabel current = new javax.swing.JLabel();
          javax.swing.JTextField url = new javax.swing.JTextField();
          javax.swing.JPanel errorTab = new javax.swing.JPanel();
          javax.swing.JTextArea errorText = new javax.swing.JTextArea();
          javax.swing.JScrollPane errorPane = new javax.swing.JScrollPane();
          javax.swing.JPanel treeTab = new javax.swing.JPanel();
          javax.swing.JTextArea treeText = new javax.swing.JTextArea();
          javax.swing.JScrollPane treePane = new javax.swing.JScrollPane();
          javax.swing.JTree searchTree = new javax.swing.JTree();
          *show the gui
          public static void main(String args[])
          (new gui()).setVisible(true);
     *listen for the button presses and set the
     *boolean flag depending on which button is pressed
     class ButtonListener implements ActionListener
          public void actionPerformed(ActionEvent event)
               Object object = event.getSource();
               if (object == start)
                    run = true;
                    startActionPerformed(event);
               if (object == cancel)
                    run = false;
                    startActionPerformed(event);
               if (object == close)
                    System.exit(0);
     *this method is called when the start or
     *cancel button is pressed.
     void startActionPerformed (ActionEvent event)
          if (run == true && bgThread == null)
               bgThread = new Thread(this);
               bgThread.start();
          if (run == false && bgThread != null)
               webSpider.cancel();
     *this mehtod will start the background thred.
     *the background thread is required so that the
     *GUI is still displayed
     public void run()
          try
               webSpider = new WebSpider(this);
               webSpider.clear();
               urlInput = new URL(url.getText());
               webSpider.addURL(urlInput);
               webSpider.run();
               bgThread=null;
          catch (MalformedURLException e)
               addressError addErr = new addressError();
               addErr.addMsg = "URL ERROR - PLEASE CHECK";
               SwingUtilities.invokeLater(addErr);
          *this method is called by the web spider
          *once a url is found. Validation of navigation
          *happens here.
          public boolean urlFound(URL urlInput,URL url)
               CurrentlyProcessing pro = new CurrentlyProcessing();
          pro.msg = url.toString();
          SwingUtilities.invokeLater(pro);
          if (!testLink(url))
                    navigationError navErr = new navigationError();
                    navErr.navMsg = "Broken Link "+url+" caused on "+urlInput+"\n";
                    return false;
          if (!url.getHost().equalsIgnoreCase(urlInput.getHost()))
               return false;
          else
               return true;
          *this method is called internally to check
     *that a link works
          protected boolean testLink(URL url)
          try
               URLConnection connection = url.openConnection();
               connection.connect();
               return true;
          catch (IOException e)
               return false;
     *this method is called when an error is
     *found.
          public void URLError(URL url)
          *this method is called when an email
          *address is found
          public void emailFound(String email)
          /*this method will update any errors found inc
          *address errors and broken links
          class addressError implements Runnable
               public String addMsg;
               public void run()
                    errorText.append(addMsg);
                    current.setText("Currently Processing: "+ addMsg);
          class navigationError implements Runnable
               public String navMsg;
               public void run()
                    errorText.append(navMsg);
          *this method will update the currently
          *processing field on the GUI
          class CurrentlyProcessing implements Runnable
          public String msg;
          public void run()
               current.setText("Currently Processing: " + msg );
//webspider.java
import java.util.*;
import java.net.*;
import java.io.*;
import javax.swing.text.*;
import javax.swing.text.html.*;
import javax.swing.tree.*;
import javax.swing.*;
*this class implements the spider.
public class WebSpider extends HTMLEditorKit
     *make a collection of the URL's
     protected Collection urlErrors = new ArrayList(3);
     protected Collection urlsWaiting = new ArrayList(3);
     protected Collection urlsProcessed = new ArrayList(3);
     //report URL's to this class
     protected gui report;
     *this flag will indicate whether the process
     *is to be cancelled
     protected boolean cancel = false;
     *The constructor
     *report the urls to the wui class
     public WebSpider(gui report)
     this.report = report;
     *get the urls from the above declared
     *collections
     public Collection getUrlErrors()
     return urlErrors;
     public Collection getUrlsWaiting()
     return urlsWaiting;
     public Collection getUrlsProcessed()
     return urlsProcessed;
     * Clear all of the collections.
     public void clear()
     getUrlErrors().clear();
     getUrlsWaiting().clear();
     getUrlsProcessed().clear();
     *Set a flag that will cause the begin
     *method to return before it is done.
     public void cancel()
     cancel = true;
     *add the entered url for porcessing
     public void addURL(URL url)
     if (getUrlsWaiting().contains(url))
          return;
     if (getUrlErrors().contains(url))
          return;
     if (getUrlsProcessed().contains(url))
          return;
     /*WRITE TO LOG FILE*/
     log("Adding to workload: " + url );
     getUrlsWaiting().add(url);
     *process a url
     public void processURL(URL url)
     try
          /*WRITE TO LOGFILE*/
          log("Processing: " + url );
          // get the URL's contents
          URLConnection connection = url.openConnection();
          if ((connection.getContentType()!=null) &&
     !connection.getContentType().toLowerCase().startsWith("text/"))
          getUrlsWaiting().remove(url);
          getUrlsProcessed().add(url);
          log("Not processing because content type is: " +
     connection.getContentType() );
               return;
     // read the URL
     InputStream is = connection.getInputStream();
     Reader r = new InputStreamReader(is);
     // parse the URL
     HTMLEditorKit.Parser parse = new HTMLParse().getParser();
     parse.parse(r,new Parser(url),true);
catch (IOException e)
     getUrlsWaiting().remove(url);
     getUrlErrors().add(url);
     log("Error: " + url );
     report.URLError(url);
     return;
// mark URL as complete
getUrlsWaiting().remove(url);
getUrlsProcessed().add(url);
log("Complete: " + url );
*start the spider
public void run()
cancel = false;
while (!getUrlsWaiting().isEmpty() && !cancel)
     Object list[] = getUrlsWaiting().toArray();
     for (int i=0;(i<list.length)&&!cancel;i++)
     processURL((URL)list);
* A HTML parser callback used by this class to detect links
protected class Parser extends HTMLEditorKit.ParserCallback
protected URL urlInput;
public Parser(URL urlInput)
this.urlInput = urlInput;
public void handleSimpleTag(HTML.Tag t,MutableAttributeSet a,int pos)
String href = (String)a.getAttribute(HTML.Attribute.HREF);
if((href==null) && (t==HTML.Tag.FRAME))
href = (String)a.getAttribute(HTML.Attribute.SRC);
if (href==null)
return;
int i = href.indexOf('#');
if (i!=-1)
href = href.substring(0,i);
if (href.toLowerCase().startsWith("mailto:"))
report.emailFound(href);
return;
handleLink(urlInput,href);
public void handleStartTag(HTML.Tag t,MutableAttributeSet a,int pos)
handleSimpleTag(t,a,pos); // handle the same way
protected void handleLink(URL urlInput,String str)
try
     URL url = new URL(urlInput,str);
if (report.urlFound(urlInput,url))
addURL(url);
catch (MalformedURLException e)
log("Found malformed URL: " + str);
*log the information of the spider
public void log(String entry)
System.out.println( (new Date()) + ":" + entry );
I have a seperate class for parseing the HTML. Any help would be greatly appreciated
mrv

Hi Sorry to be a pain again,
I have re worked the gui class so it looks like this now:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.tree.*;
import javax.swing.event.*;
import java.net.*;
import java.io.*;
import java.util.*;
public class gui extends JFrame implements Runnable
     *declare variable, boolean
     *thread, a object and a center
     *pane
     protected URL urlInput;
     protected Thread bgThread;
     protected boolean run = false;
     protected WebSpider webSpider;
     public String msgInfo;
     public String brokenUrl;
     public String goodUrl;
     public String deadUrl;
     protected DefaultMutableTreeNode rootNode;
protected DefaultTreeModel treeModel;
     public gui()
          *create the gui here
          setTitle("Testing Tool");
     setSize(600,600);
     //add Buttons to the tool bar
     start.setText("Start");
     start.setActionCommand("Start");
     toolBar.add(start);
     ButtonListener startListener = new ButtonListener();
          start.addActionListener(startListener);
          cancel.setText("Cancel");
     cancel.setActionCommand("Cancel");
     toolBar.add(cancel);
     ButtonListener cancelListener = new ButtonListener();
          cancel.addActionListener(cancelListener);
          close.setText("Close");
     close.setActionCommand("Close");
     toolBar.add(close);
     ButtonListener closeListener = new ButtonListener();
          close.addActionListener(closeListener);
          //creat a simple form
          urlLabel.setText("Enter URL:");
          urlLabel.setBounds(100,36,288,24);
          formTab.add(urlLabel);
          url.setBounds(170,36,288,24);
          formTab.add(url);
          current.setText("Currently Processing: ");
          current.setBounds(100,80,288,24);
          formTab.add(current);
     //add scroll bars to the error messages screen and website structure
     errorPane.setAutoscrolls(true);
     errorPane.setHorizontalScrollBarPolicy(javax.swing.
     ScrollPaneConstants.HORIZONTAL_SCROLLBAR_ALWAYS);
     errorPane.setVerticalScrollBarPolicy(javax.swing.
     ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS);
     errorPane.setOpaque(true);
     errorTab.add(errorPane);
     errorPane.setBounds(0,0,580,490);
     errorText.setEditable(false);
     errorPane.getViewport().add(errorText);
     errorText.setBounds(0,0,600,550);
     treePane.setAutoscrolls(true);
     treePane.setHorizontalScrollBarPolicy(javax.swing.
     ScrollPaneConstants.HORIZONTAL_SCROLLBAR_ALWAYS);
     treePane.setVerticalScrollBarPolicy(javax.swing.
     ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS);
     treePane.setOpaque(true);
     treeTab.add(treePane);
     treePane.setBounds(0,0,580,490);
     treeText.setEditable(false);
     treePane.getViewport().add(treeText);
     treeText.setBounds(0,0,600,550);
     //JTree
     // NEW CODE
     rootNode = new DefaultMutableTreeNode("Root Node");
     treeModel = new DefaultTreeModel(rootNode);
     treeModel.addTreeModelListener(new MyTreeModelListener());
     tree = new JTree(treeModel);
     tree.setEditable(true);
     tree.getSelectionModel().setSelectionMode(TreeSelectionModel.SINGLE_TREE_SELECTION);
tree.setShowsRootHandles(true);
     treeText.add(tree);
     //create the tabbed window
centerPane.setBorder(new javax.swing.border.EtchedBorder());
formTab.setLayout(null);
errorTab.setLayout(null);
treeTab.setLayout(null);
centerPane.addTab("Search Parameters", formTab);
centerPane.addTab("Error Messages", errorTab);
centerPane.addTab("Website Structure", treeTab);
          //add the tool bar and tabbed pane
          getContentPane().add(toolBar, java.awt.BorderLayout.NORTH);
getContentPane().add(centerPane, java.awt.BorderLayout.CENTER);
          *create the tool bar pane, a center pane, add the buttons,
          *labels, tabs, a text field for user input here
          javax.swing.JPanel toolBar = new javax.swing.JPanel();
          javax.swing.JButton start = new javax.swing.JButton();
          javax.swing.JButton cancel = new javax.swing.JButton();
          javax.swing.JButton close = new javax.swing.JButton();
          javax.swing.JTabbedPane centerPane = new javax.swing.JTabbedPane();
          javax.swing.JPanel formTab = new javax.swing.JPanel();
          javax.swing.JLabel urlLabel = new javax.swing.JLabel();
          javax.swing.JLabel current = new javax.swing.JLabel();
          javax.swing.JTextField url = new javax.swing.JTextField();
          javax.swing.JPanel errorTab = new javax.swing.JPanel();
          javax.swing.JTextArea errorText = new javax.swing.JTextArea();
          javax.swing.JScrollPane errorPane = new javax.swing.JScrollPane();
          javax.swing.JPanel treeTab = new javax.swing.JPanel();
          javax.swing.JTextArea treeText = new javax.swing.JTextArea();
          javax.swing.JScrollPane treePane = new javax.swing.JScrollPane();
          javax.swing.JTree tree = new javax.swing.JTree();
          *show the gui
          public static void main(String args[])
          (new gui()).setVisible(true);
     *listen for the button presses and set the
     *boolean flag depending on which button is pressed
     class ButtonListener implements ActionListener
          public void actionPerformed(ActionEvent event)
               Object object = event.getSource();
               if (object == start)
                    run = true;
                    startActionPerformed(event);
               if (object == cancel)
                    run = false;
                    startActionPerformed(event);
               if (object == close)
                    System.exit(0);
     *this method is called when the start or
     *cancel button is pressed.
     void startActionPerformed (ActionEvent event)
          if (run == true && bgThread == null)
               bgThread = new Thread(this);
               bgThread.start();
               //new line of code
               treeText.addObject(msgInfo);
          if (run == false && bgThread != null)
               webSpider.cancel();
     *this mehtod will start the background thred.
     *the background thread is required so that the
     *GUI is still displayed
     public void run()
          try
               webSpider = new WebSpider(this);
               webSpider.clear();
               urlInput = new URL(url.getText());
               webSpider.addURL(urlInput);
               webSpider.run();
               bgThread = null;
          catch (MalformedURLException e)
               addressError addErr = new addressError();
               addErr.addMsg = "URL ERROR - PLEASE CHECK";
               SwingUtilities.invokeLater(addErr);
          *this method is called by the web spider
          *once a url is found. Validation of navigation
          *happens here.
          public boolean urlFound(URL urlInput,URL url)
               CurrentlyProcessing pro = new CurrentlyProcessing();
          pro.msg = url.toString();
          SwingUtilities.invokeLater(pro);
          if (!testLink(url))
                    navigationError navErr = new navigationError();
                    navErr.navMsg = "Broken Link "+url+" caused on "+urlInput+"\n";
                    brokenUrl = url.toString();
                    return false;
          if (!url.getHost().equalsIgnoreCase(urlInput.getHost()))
               return false;
          else
               return true;
          *this method is returned if there is no link
          *on a web page, e.g. there us a dead end
          public void urlNotFound(URL urlInput)
                    deadEnd dEnd = new deadEnd();
                    dEnd.dEMsg = "No links on "+urlInput+"\n";
                    deadUrl = urlInput.toString();
          *this method is called internally to check
     *that a link works
          protected boolean testLink(URL url)
          try
               URLConnection connection = url.openConnection();
               connection.connect();
               goodUrl = url.toString();
               return true;
          catch (IOException e)
               return false;
     *this method is called when an error is
     *found.
          public void urlError(URL url)
          *this method is called when an email
          *address is found
          public void emailFound(String email)
          /*this method will update any errors found inc
          *address errors and broken links
          class addressError implements Runnable
               public String addMsg;
               public void run()
                    current.setText("Currently Processing: "+ addMsg);
                    errorText.append(addMsg);
          class navigationError implements Runnable
               public String navMsg;
               public void run()
                    errorText.append(navMsg);
          class deadEnd implements Runnable
               public String dEMsg;
               public void run()
                    errorText.append(dEMsg);
          *this method will update the currently
          *processing field on the GUI
          public class CurrentlyProcessing implements Runnable
               public String msg;
          //new line
          public String msgInfo = msg;
          public void run()
               current.setText("Currently Processing: " + msg );
     * NEW CODE
     * NEED THIS CODE SOMEWHERE
     * treeText.addObject(msgInfo);
     public DefaultMutableTreeNode addObject(Object child)
     DefaultMutableTreeNode parentNode = null;
     TreePath parentPath = tree.getSelectionPath();
     if (parentPath == null)
     parentNode = rootNode;
     else
     parentNode = (DefaultMutableTreeNode)
(parentPath.getLastPathComponent());
     return addObject(parentNode, child, true);
     public DefaultMutableTreeNode addObject(DefaultMutableTreeNode parent,
Object child)
     return addObject(parent, child, false);
     public DefaultMutableTreeNode addObject(DefaultMutableTreeNode parent,
     Object child,boolean shouldBeVisible)
     DefaultMutableTreeNode childNode = new DefaultMutableTreeNode(child);
     if (parent == null)
     parent = rootNode;
     treeModel.insertNodeInto(childNode, parent, parent.getChildCount());
     if (shouldBeVisible)
     tree.scrollPathToVisible(new TreePath(childNode.getPath()));
          return childNode;
     public class MyTreeModelListener implements TreeModelListener
          public void treeNodesChanged (TreeModelEvent e)
               DefaultMutableTreeNode node;
               node = (DefaultMutableTreeNode)
               (e.getTreePath().getLastPathComponent());
               try
                    int index = e.getChildIndices()[0];
                    node = (DefaultMutableTreeNode)
                    (node.getChildAt(index));
               catch (NullPointerException exc)
          public void treeNodesInserted(TreeModelEvent e)
          public void treeStructureChanged(TreeModelEvent e)
          public void treeNodesRemoved(TreeModelEvent e)
I beleive that this line of code is required:
treeText.addObject(msgInfo);
I have placed it where the action events start the spider, but i keep getting this error:
cannot resolve symbol
symbol : method addObject (java.lang.String)
location: class javax.swing.JTextArea
treeText.addObject(msgInfo);
Also the jtree is not showing the window that I want it to and I am not too sure why. could you have a look to see why? i think it needs a fresh pair of eyes.
Many thanks
MrV

Help with building dynamic website using tutorial (was: I know this is a repost but I'm still stuck!)

Perhaps this was missed by the group but here goes:
I am slogging thru a dynamic PHP tutorial but I cant continue without losing some understanding of the process due to ?
I am trying to complete the following:
Building your first dynamic website – Part 2: Developing the back end
However,
my Insert record form dialog (below) looks like this, and I need to change both 'title' and 'blog_entry' values (as shown above), but I cannot make that choice in my form.
I am using DW CC with the Deprecated Server Behavior from DMX zone.
I have made sure my results match the tutorial, but I cant get past the above inconsistency in functionality.
Any help would be appreciated.
Thanks folks!

The Columns area indicates which form field is used to insert a value in each column. Although the post_id and updated columns are listed as getting no value, their values are generated automatically by the database.
Check that the title and blog_entry columns are being assigned the correct values. If either is marked as getting no value, it means that you have spelled the names of the form fields differently from the column names. Correct this by selecting the column name in the Columns area and selecting the form field's name from the Value pop-up menu.
Nancy O.

How can I get my passcode protected iPhone6 to work with building entry system?

iPhone6 issue: The apartment building has an entry system that dials my phone so I can remotely release the door. When I have a passcode on the phone it will not ring when the system dials it. Without the passcode it works. How can I keep the passcode on my phone and use the entry system?

Here is a list of products that are not supported in the win7 OS. This product is listed there.
Products not supported in win7
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Help with building a select box from a query?

New thread from a topic I started yesterday. From the responses, and a search of other threads, I realized that I was way off base:-) So, I went back and verified that my TomCat setup was alright. After a few tweeks I verified that I could display the index page and successfully run all of the example servlets and jsps. I then built a simple login.jsp and an associated bean to verify a user id and password on an ldap db. That works good. Next, I built a bean which runs a query against the same ldap db and returns a list of last names. What I want to do is use the last names in the bean to populate my select box. At first I was trying to build the html with the list from my bean, i quickly realized you guys didn't like that approach. So, can someone explain, in some detail (because I'm really dense), just how I can return the values from my bean and build a select box with those values.
regards,
Mat
BTW Gone to see Lord of The Rings...back in about 5 hours :-)

Just in general, I prefer knowing how to do things the "old-fashioned way" first before using other tools, because if it comes time for you to take over someone else's code, you'll probably find that they did it the old way and you'll want to understand that. Further, the new ways are based on the old ways for many things.
Struts is a good system, but unless you have some understanding of the basics, it's probably going to be harder to understand it. If you have the time, I'd say at least go thru one book on JSP/servlets (which should be all about the basics, maybe a slightly older book) and go thru the examples in it.

Help with building a form

Hello, I'm pretty new to LifeCycle and don't even know if this is the right program I should be using to do this but I thought I'd give it a shot.
The branch I work for in my company has been doing media planning up in Saskatchewan for about a year now. We build and distribute ads through small towns across Saskatchewan for all types of people. We have been building up a list of newspapers that we can use including the contact information and prices of various sized ads.
We don't have a way to reference all the newspapers quickly. We have to go back through prior folders and find each newspaper and their contact information before we can plan for the next ad run. What I would like to do is build a form that would be easy to just click on a drop down menu, find the newspaper that you want, and then all the information will pop up in a contact box below the drop down menu.
I've already build a mini drop down menu with about 10 newspapers to see if this will work but I don't know how to link the drop down menu item with another box that will open up all the contact and pricing info.
Can someone please help?
Thanks!

Hi,
you can do what you want with LiveCycle, and it might help you to look at this reference as it shows how to work with data ( it does depend how your data is stored)
http://help.adobe.com/en_US/livecycle/9.0/designerHelp/index.htm?content=000006.htmlhttp://help.adobe.com/en_US/livecycle/9.0/designerHelp/index.htm?content=000006.html
If you data does not change very often then I would recommend just using an XML file to store the data and then use thebinding ability with possible some JavaScript to create the solution you would like.
Hope this helps
Malcolm

Help with building a database portlet (reference_path) issues

I'm attempting to create a Provider Portlet based on the Database Provider example. The goal of the portlet is to
dynamically display a Portal Report based upon a session storage variable. The session storage variable is set in another portlet on the same page. My portlet is named DYNAMIC_RPT.
I'm able to display the report from within my database portlet by calling the report's .show procedure.
But, my problem is this: The reference_path is generated for my database portlet, for example 131_DYNAMIC_RPT_123123, so when I click the NEXT button on the report, the page is refreshed but the report is still on page 1.
I think the problem is that my portlet needs to internally determine what the reference_path SHOULD BE for the report I'm trying to display, and use it in the associated provider API's.
If I could call the API which is generating the reference_path I could then pass an appropriate reference_path. I would need to be able to dynamically regenerate the reference_path when ever the session variable changes. Is this possible ?
Also, when I'm building the p_arg_names, and p_arg_values whould I ONLY extract the argument(parms) which are associated with the p_reference_path of the portlet report currenttly being displayed ?
Also is there a session storage variable which contains the current PAGE ID and TAB ID. I'm extracting it form the PAGE_URL but it's very messy code.
Thanks in advance for your help !!

Hi,
you can do what you want with LiveCycle, and it might help you to look at this reference as it shows how to work with data ( it does depend how your data is stored)
http://help.adobe.com/en_US/livecycle/9.0/designerHelp/index.htm?content=000006.htmlhttp://help.adobe.com/en_US/livecycle/9.0/designerHelp/index.htm?content=000006.html
If you data does not change very often then I would recommend just using an XML file to store the data and then use thebinding ability with possible some JavaScript to create the solution you would like.
Hope this helps
Malcolm

Help with speeding up system.

OS Name   Microsoft Windows 7 Home Premium
Version   6.1.7600 Build 7600
Other OS Description    Not Available
OS Manufacturer   Microsoft Corporation
System Name   DOCSGAMING-PC
System Manufacturer   MICRO-STAR INTERNATIONAL CO.,LTD
System Model   MS-7577
System Type   x64-based PC
Processor   AMD Athlon(tm) II X2 250 Processor, 3000 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date   American Megatrends Inc. V1.17, 2/18/2011
SMBIOS Version   2.5
Windows Directory   C:\Windows
System Directory   C:\Windows\system32
Boot Device   \Device\HarddiskVolume1
Locale   United States
Hardware Abstraction Layer   Version = "6.1.7600.16385"
User Name   DocsGaming-PC\DocsGaming
Time Zone   US Mountain Standard Time
Installed Physical Memory (RAM)   8.00 GB
Total Physical Memory   8.00 GB
Available Physical Memory   6.42 GB
Total Virtual Memory   16.0 GB
Available Virtual Memory   14.1 GB
Page File Space   8.00 GB
Page File   C:\pagefile.sys

For that combo you have, there should be full support for AMD OverDrive and as an alternative MSI Control Center for enabling somewhat of easy overclock. Should bring you a few more FPS.
http://sites.amd.com/us/game/downloads/amd-overdrive/pages/overview.aspx
http://www.lostintechnology.com/how-to/how-to-overclock-your-cpu-using-amd-overdrive/
http://www.msi.com/product/mb/790FX-GD70.html#/?div=Utility&os=Win8%2064
For the graphic card, the Catalyst Control has one feature for overclocking it, it need be enabled by accepting one item in the menu.
http://www.makeuseof.com/tag/overclock-ati-video-card-ati-overdrive/
As usual, use these features with a bit of carefulness, do not overdo it as it may cause instability or damage.

Help with building query

Hi ALl,
Below is a code sample. My question is how to build the query in the for loop of public procedure to call all the private proedures (private_1,private_2,private_3 etc.)
PACKAGE SAMPLE AS
procedure public(start IN integer, end IN integer)
END;
PACKAGE BODY SAMPLE IS
procedure private_1()
BEGIN
END
procedure private_2()
BEGIN
END
procedure private_3()
BEGIN
END
procedure public(start IN integer, end IN integer)
BEGIN
for num in start..end loop
private_ || to_char(num); ?????????????????????????
end loop
END
END;

Actually, you can build dynamic PL/SQL and execute it via 'execute immediate':
execute immediate 'begin private_' || to_char(num) || '; end;';But...it will not help in this case because the NDS is executed outside of the scope of the package - it cannot see the private procedures, and it cannot even see public procedures unless you preface the procedure with the package name.

Help with the java system, please !!

Each time i execute the following statement,
create or replace java system;
I get the following errors:
VM: Killing process oracle
end-of-file on communication channel
Can anyone help me with this problem, please?

My platform is Linux - Red Hat 6.2 -.
I did the changes in the sizes of the java_pool and shared_pool and I got the same problem.
But, I've just fixed the problem b increasing the size of the swap partition. I changed it from 100 MB to 1000 MB. Then, I got everything very clean.
Thanks a lot for your help and your consideration.

Help with building AMD64 System

Similar Messages

Maybe you are looking for