Help with Bumblebee install

Hi All,
I'm having a few problems getting bumblebee installed.
I have downloaded the most recent tar file from,
https://github.com/Bumblebee-Project/Bu … /downloads
used "tar xf filename" to unpack into it's own directory.
I am now running sudo ./install to attempt an install (is this correct? I don't need to use makepkg?).
The install tells me I have missing dependencies of virtualgl-bin and dkms-nvidia...
I have virtualgl 2.3-2 installed and it appears when I type pacman -Q virtualgl. So I'm a little confused as to what virtualgl-bin is and where I get it from? help appreciated.
Also I just downloaded dkms-nvidia from this link..
http://aur.archlinux.org/packages.php?ID=45738
and attempted to install the downloaded .run file using the 'sh' command... it runs the installer but that installer produces the following error,
The kernel header file '/usr/src/linux-3.1.2-1-ARCH/include/linux/kernel.h' does not exist. The most likely reason for this is that the kernel source path  '/usr/src/linux-3.1.2-1-ARCH' is incorrect. Please make sure you have installed the kernel source files for your kernel and that they are properly configured.... etc
Any ideas?
Many Thanks

Sidhartha wrote:I am now running sudo ./install to attempt an install (is this correct?
No, it is not correct.
One of the main reasons why you are encouraged to use pacman/makepkg/aur-helpers to install software is so that pacman can manage the dependencies.  This is one of the strengths of pacman, and of arch in general.  From reading your previous posts it seems like you continue to install packages without using any of the above listed tools.
If you choose to install manually, your files can be in various locations and you will have to keep track of them all yourself.  If you are unable to keep track of them (I can't blame you, I wouldn't be able to, so I use pacman/yaourt) ... if you can not keep track of them, I don't know how anyone else on these forums would know what you have done or how to fix it.
Sidhartha wrote:Any ideas?
Three ideas.  First, remove *all* packages that you have installed manually and reinstall them using pacman or aur-tools.  Second read, or reread the wiki's and other info Karol provided on the other thread - and let the information sink in.  Three, thank Karol for being far more patient and helpful than there was any reason to be.

Similar Messages

  • I need help with re installing my apple account for itunes.

    Had problems with my itune account, so I uninstalled and now need help with re-installing the program with the songs I have already purchased.

    Your iTunes account is something at the iTunes Store online.  It is not possible to uninstall it.  Do you mean the iTunes application?  Even if you delete the application and restore it, it should not have deleted your iTunes library (essentially the contents of the iTunes folder in Music) on your computer unless you did a separate steep and specifically deleted that too.  You need to tell us what it was you deleted.

  • Tips and help with re-installing Lion over Snow Leopard

    I had MAJOR issues with my initial Lion install on my Mid-2009 MBP- so much so, that I had to wipe my hard drive and re-install Snow Leopard and all my applications. My major issues were as follows:
    1. All my files were locked out- I could open them in most cases, but I couldn't overwrite them- Lion had aded some funky permissions scheme that I didn't recognize, and my user name wasn't present on any of them. In some cases, I couldn't even open files, even though they were resident on my hard drive (and in my own user folder) before the upgrade to Lion.
    2. Apple's own Universal Binary apps wouldn't work after the upgrade. Final Cut Pro 6, in particular, came up with a message that it was a "PowerPC" app and wouldn't run- yet Shake 4.1 would run just fine!
    3. Adobe Creative Suite 3- after the upgrade, my Abode Ceative Suite 3 apps worked just fine, for about a day- that is, until I tried to correct the file permissions issue by changing permission on a few of my folders in my User folder (and electing to change permissions in the files contained therein)- at which point my Adobe apps told me that they were damaged and needed to be reinstalled. Yet after uninstaling and reinstalling the entire Creative Suite 3 times, I still would get the same message.
    My entire workflow is Adobe CS and FCS2- why chould I have to pay the upgrade costs just to use Lion? FCPX is completely brkoen for my workflow and eqipment, and Adobe can't even guarantee that CS5 works with Lion- so why does Apple insist on Lion when it's hardly even compatible with its own products?
    I really want to use Lion, but I am looking for some tips on instalation to kep these problems from happening again. I didn' have ANY of these problems with upgrading OS 10.2 through 10.6. Any help with prepping my system/files for upgrading would be helpful. Thanks!

    any new Apple kB articles
    http://support.apple.com/kb/index?page=articles
    Me, I think clone backups are more useful, and only use T.M. as secondary.
    Using Cloning as a Backup Strategy
    I'd assume that professional apps may need to be tested still; and of course check to see what you have that depends on PowerPC code and Rosetta first. That has some in a tither.
    A clone lets you still be able to boot Snow Leopard. Check out Carbon Copy, SuperDuper.

  • Help with Classic install

    Hi all, I'm sure this question has been asked before so forgive me. I've looked all around and found solutions that were 'similar' to my problem but none that will work. here we go.
    I just got an old Mac G4 tower (AGP) and bought Tiger to put on it. (not sure what version of OSX was on it before) Anyway I did a clean install and everythig works great. No problems at all.
    I was installing a program yesterday that turns out needs Classic support. Right now there is no updated version of this program and I need to run it. My machine doesnt have Classic support. How do I install it? I've read that there is a second install disk that you can use my my boxed version of OSX has only one disk. I searched the disk and see that there is a Classic folder on it with an install app but when i run it it doesnt do anything. It just informs me that neither of my hard drivers have Classic.
    I'm stuck. Any help would be greatly appreciated. I REALLY need to run this legacy application.
    G4 (AGP) Mac OS X (10.4.7)
    G4 (AGP)   Mac OS X (10.4.7)  

    I'd find that 2nd DVD, it's supposed to come with OSX
    10.4. Follow the instructions on this article and an
    "Applications (OS9)" folder will appear in your
    Macintosh HD.
    http://docs.info.apple.com/article.html?path=Mac/10.4/
    en/mh763.html
    OS 9 has not shipped with OS X since Jaguar.
    However, OS 9 does ship with PPC Macs. It should be on the install DVD, or on the 2nd or 3rd CD, depending on which Mac. Example: my original 700 MHz eMac shipped with OS X 10.1 and OS 9.2.2 on separate CDs, both bootable. My 1.25 GHz eMac shipped with OS X 10.3 and OS 9.2.2, with the OS X disc being bootable and the OS 9.2.2 disc being part of the applications suite and not being bootable. My 2.1 GHz iMac shipped with OS X 10.4 and OS 9.2.2 on the same DVD. OS 9.2.2 is again part of the application suite and cannot be booted from the DVD. The Intel Macs at the office shipped with OS X 10.4 and that's it, no OS 9.2.2 as Classic does not run on them.
    A boxed set of OS X 10.2 shipped with OS 9.2.2 on a separate CD. (It was a white 'universal install' CD and would install on all Macs produced up to that time.) I have such a boxed set on a shelf in the cupboard right now. A boxed set of OS X 10.3 shipped with four CDs, none of which was OS 9. I have such a boxed set on a shelf near my eMac right now. A boxed set of 10.4 shipped with a single DVD. I have such a boxed set on a shelf near my eMac right now. I have just opened the box and verified by sight: one DVD, OS X only. A further check of the contents of that DVD show no mention of OS 9.
    The OP will need to have the system CDs or DVD which shipped with his Mac to install Classic.
    iMacG5 2.1GHz 1.5GB RAM   Mac OS X (10.4.7)   eMac 1.25 GHz 2 GB, assorted Windows boxes

  • Help with Tiger install and getting hot keys and start up manager to work

    this open firmware issue, how do you get around it? Wonder if it is causing me trouble; i.e. shift and other keys do not work and keeping me from booting with Tiger install. How do I access these keys then?
    I did a clean install on a secondary internal drive (device 1) 150GB Maxtor
    but it won't boot and "restart" brings me back to install process...
    have repaired disk -- OK -- repaired permissions -- OK. Re-installed and repaired. Peripherals are off or disconnected. Current OS is 10.3.9 on 20 GB HD (device 0)
    What now? Would appreciate some guidance. Thank you.
    Ali
    This is my CPU
    Build 7W98
    Machine Model: Power Mac G4 (AGP graphics)
    CPU Type: PowerPC G4 (2.8)
    Number Of CPUs: 1
    CPU Speed: 450 MHz
    L2 Cache (per CPU): 1 MB
    Memory: 2 GB
    Bus Speed: 100 MHz
    Boot ROM Version: 4.2.8f1
    Serial Number:

    Hi Ali,
    re: this open firmware issue, how do you get around it? I really did not understand the support page you link to...but wonder if it is causing me trouble; i.e. shift and other keys do not work. How do I access these keys then?
    Is this a Wireless KB you have? Many aren't recognized until after booting.
    Hmmm, you've got the firmware Update needed for the AGP to install/use 10.4...
    I think I'd try this, worked for me on 3 such macs...
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the Erase tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume, then choose MacOS Extended Journalled, select the Partition tab.
    6. Click Erase & look for Security Options. choose Zero 1 pass."
    Formatting & Partitioning a Hard Drive in OS X - Tiger and Leopard...
    http://www.kenstone.net/fcphomepage/partitioningtiger.html
    Hopefully then a fresh install will work.
    Oh, what are the Jumper settings on hat drive? Apple recommends Cable Select, but I find different settings work with a dizzying variety of Drive combos.

  • Help with Re-installing an app through app manager after after accidental uninstalled?

    Okay - I've purchased lightroom 4, with the intent to upgrade my creative suite from 5.5 to 6 a week or so ago... Adobe was kind enough to credit me back as at time of upgrade, CS6 was no longer available and lightroom 4 would have been included in my CC membership.
    I've installed all the CC apps, and received a weird german email about LR4 intalls... So I uninstalled my current copy of LR4 and went to re-install from the CC app manager... It says that it is already installed and won't let me download it from the site... The trouble is that it isn't really installed anymore, and now I really need to use it... Any help would certainly be appreicated.
    Thanks.

    If you are using Windows Mahcine then go to control panel and uninstall the lightroom properly from there.
    If you are using MAC then go to /Applications/Utilities/Adobe installers and find the uninstaller of lightroom and double click the same to uninstall.
    If still you are not able to uninstall the application completly then use CS cleaner tool to uninstall the software. you can download CS cleaner tool from : http://www.adobe.com/support/contact/cscleanertool.html

  • [SOLVED] need help with virtualbox install

    I'm a relative n00b to Arch, haging migrated from Ubuntu (pha!!). Arch rocks!
    However, my beloved virtualbox isnt playing ball!
    After many hours of getting arch up and running I now need some assitance please with VirtualBox PEUL. I've googled and search these wikis and found:
    http://aur.archlinux.org/packages.php?d … s=0&SeB=nd
    http://www.mail-archive.com/vbox-users% … 02889.html
    http://wiki.archlinux.org/index.php/VirtualBox
    but, I dont know how to install.
    I used yaourt (having spent another many hours trying to get to speed with what Arch AUR is and yaourt!!)
    This is what I did:
    1. Visited http://wiki.archlinux.org/index.php/VirtualBox and followed PEUL instructions...
    2. Click on AUR link and then click on PKGBUILD and it downloaded a PKGBUILD from here http://aur.archlinux.org/packages.php?d … s=0&SeB=nd
    3. Then went back to the wiki http://wiki.archlinux.org/index.php/VirtualBox  and clicked on VirtualBox_1.5.6-1_Linux_x86.run and downloaded the file.
    4. In accordance with the instructions on the wiki, I ran makepkg
    HOWEVER, I get errors!!:
    # makepkg --asroot
    ==> Making package: virtualbox_bin 1.5.6-1 (Thu May 1 20:06:33 BST 2008)
    ==> WARNING: Running makepkg as root...
    ==> Checking Runtime Dependencies...
    ==> Checking Buildtime Dependencies...
    ==> Retrieving Sources...
    -> Found VirtualBox_1.5.6-1_Linux_x86.run in build dir
    -> Found vbox.install in build dir
    -> Found vbox_build_module in build dir
    -> Found vboxnet.patch in build dir
    -> Found interfaces in build dir
    ==> Validating source files with md5sums...
    VirtualBox_1.5.6-1_Linux_x86.run ... FAILED
    vbox.install ... Passed
    vbox_build_module ... Passed
    vboxnet.patch ... Passed
    interfaces ... Passed
    ==> ERROR: One or more files did not pass the validity check!
    This is what is in the downloaded files dir:-
    ls -l
    total 48
    -rw-r--r-- 1 daz users 3642 2008-05-01 20:06 PKGBUILD
    -rw-r--r-- 1 daz users 26055 2008-05-01 20:05 VirtualBox_1.5.6-1_Linux_x86.run
    -rwxrwxrwx 1 nobody nobody 217 2008-01-08 20:58 interfaces
    drwxrwxrwx 2 root root 125 2008-05-01 20:06 src
    -rwxrwxrwx 1 nobody nobody 2717 2008-02-22 18:22 vbox.install
    -rwxrwxrwx 1 nobody nobody 174 2008-02-22 17:45 vbox_build_module
    -rwxrwxrwx 1 nobody nobody 2179 2007-12-30 12:31 vboxnet.patch
    Can anyone help please? In Ubuntu all this was just installed with dpkg -i VirtualBox.deb
    I'm sure Arch is just as "simple" :-)
    Last edited by keratos (2008-05-04 07:54:14)

    grave wrote:Or try the bin file no problem here  yaourt -S virtualbox_bin
    Good idea, I checked this out originally but it didnt work so I went for "manual" install.
    The download from yaourt never starts, just hangs - the server is dead or something?? ...
    # yaourt -S virtualbox_bin
    ==> WARNING: Building unsupported package as root is dangerous.
    Please run yaourt as a non-privileged user.
    ==> Downloading virtualbox_bin PKGBUILD from AUR...
    ==> Last 5 comments ordered by date (asc):
    Comment by: chris_es on 20080414 [17:02:11]
    Hello!
    Thanks a lot for this package :o)
    Just a quick comment about where to copy the Sun .run package. It should be put to where the tarball from AUR was extracted.
    In my case, it is /home/[users]/virtualbox-bin/
    Cheers
    Chris
    Comment by: fi-dschi on 20080419 [22:46:37]
    You may download the run-file at
    https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_SMI-Site/en_US/-/USD/ViewProductDetail-Start?ProductRef=innotek-1.5.6-G-F@CDS-CDS_SMI
    Comment by: GGLucas on 20080421 [00:40:38]
    Can't get the kernel module working in 2.6.25, vbox_build_module completes fine, but I get the following error:
    $ sudo modprobe vboxdrv
    FATAL: Error inserting vboxdrv (/lib/modules/2.6.25-ARCH/misc/vboxdrv.ko): Unknown symbol in module, or unknown parameter (see dmesg)
    with these messages in dmesg:
    vboxdrv: Unknown symbol change_page_attr
    vboxdrv: Unknown symbol change_page_attr
    Comment by: Geekosaurio on 20080422 [03:54:09]
    Maybe you could find this instructions helpful
    http://www.mail-archive.com/[email protected]/msg02889.html
    I've not tried this myself but I will do it soon and post the info here. Maybe create a separate package for 2.6.25 kernels it's a good idea.
    Comment by: ise on 20080429 [18:12:57]
    The vboxdrv from the mailinglist of virtualbox runs here without problems on 2.6.25 with vbox 1.5.6
    First Submitted: Sun, 11 Mar 2007 00:52:22 +0000
    Last Updated: Fri, 22 Feb 2008 18:26:15 +0000
    virtualbox_bin 1.5.6-1 (Unsupported): Powerful x86 virtualization - binary version (non GPL - free for personal use and evaluation)
    ==> virtualbox_bin dependencies:
    - libidl2 (already installed)
    - libxslt (already installed)
    - qt3 (already installed)
    - e2fsprogs (already installed)
    - sdl (already installed)
    - libstdc++5 (already installed)
    - patch (already installed)
    ==> Edit the PKGBUILD (recommended) ? [Y/n] ("A" to abort)
    ==> ----------------------------------------------
    ==>n
    ==> WARNING: This PKGBUILD contains install file that can be dangerous.
    vbox.install
    ==> Edit vbox.install (recommended) ? [Y/n] ("A" to abort)
    ==> ----------------------------------------------
    ==>n
    ==> Continue the building of 'virtualbox_bin'? [Y/n]
    ==> ----------------------------------------------
    ==>y
    ==> Building and installing package
    ==> Making package: virtualbox_bin 1.5.6-1 (Fri May 2 06:06:28 BST 2008)
    ==> WARNING: Running makepkg as root...
    ==> Checking Runtime Dependencies...
    ==> Checking Buildtime Dependencies...
    ==> Retrieving Sources...
    -> Downloading VirtualBox_1.5.6-1_Linux_x86.run...
    --2008-05-02 06:06:29-- http://195.34.175.98/download/1.5.6/VirtualBox_1.5.6-1_Linux_x86.run
    Connecting to 195.34.175.98:80...
    Last edited by keratos (2008-05-02 05:52:33)

  • Help with archive & install

    Aloha!
    I hope someone can help me since I've been searching and reading these discussions all day and haven't found the answer to my problem.
    I updated my OS to Leopard 10.5 and began experiencing problems. I did a archive and install back to Tiger 10.4 and now don't know how to restore all the user files in the "previous system folder". I've read the Apple article on restoring after archive and install but I don't understand the whole instructions. I tried creating a new user (with same short name and password) and created a .dmg file of the previous system user folder using disk utility. After copying the files, it doesn't allow me to open the applications. It says I don't have sufficient access privileges. I can't confirm if the file transfer was successful. I'm totally lost and confused. Any help will be appreciated.

    Which article was that please?

  • Need help with PSE11 install

    Downloaded PSE11 with Akamai and it will not install.

    Akamai download manager shows 2 file links.  Both read the same except 1st one shows 11 LS15.7Z and the 2nd shows LS15.exe  1st one appears to download correctly but 2nd one
    Says file archive part of Adobe pSE11 is missing and you need all parts in the same folder in order to extract Adobe PSE11. Please download all parts.
    Can you help?

  • Need help with PSE12 install

    The files apparently downloaded properly, but during install I get the following error message:
    The following applications are using files that need to be updated by this setup. Close these applications and click Retry to continue: ElementsAutoAnalyzer.exe.
    I'm installing to a Windows XP SP 3 machine with at least 1 gig of ram, and a 1 Tb hard drive that's less than half full, so I don't think it's a hardware issue.  I cannot find the named file running anywhere on the machine - anyone run into this?
    Help, please!  Thanks!
    Dyane

    Hi,
    Please open Task Manager by pressing Ctrl+Shift+Esc. Open "Processes" tab. Make sure you click "Show processes from all users" . Please see ifElementsAutoAnalyzer.exe is shown in the TaskManager.  Please close it and then try to install again.
    Regards,
    Anushree

  • Help with CS5 Install to New Dell Laptop!

    I am consistently getting this (ERROR: DW050:  - Adobe Color EU CS5.5: Install failed), after several attempts to install CS5.5 on my new Dell laptop computer. I turned off my firewall and antivirus security, as suggested by the installer, but none of it made any difference. I have the download exe. file on my  network drive, however I did place a copy on my desk top to do the install. Any assistance would be appreciated.

    Please provide us with the following logs.
    You can find them at:
    PS Installer logs
    For Mac:
    Library\Logs\Adobe\Installer
    For Win:
    Program Files(x86)\Common Files\Adobe\Installers
    You can zip all the files together and send us through mail. This would help us in finding the root cause.
    Appreciate your help. Apologize for the inconvenience.
    Regards,
    Ashutosh
    [email protected]

  • Help with O9iAS install procedure.

    Hi
    I have never installed OAS and would value any help.
    We have a clean windows 2000 machine that will serve as the OAS platform, we want to install standard edition (9i v1.0.2.1.0). The backend db we wish to connect to for data is a Oracle 7.3.4 on HP-UX.
    We are not interested in setting up Oracle portal.
    What is the approach I must follow, the install GUI does not seem to make much sense to me?
    I tried an install but after install showed 100% complete I got a hanging sql connect at a command prompt and then the configuration utility was not launched.
    Please any help will be appreciated.
    Regards
    Graham
    null

    You may want to check the certification for this one. I'm not sure if 7.3.4 is certified with iAS 1.0.x

  • Help with raid install for MSI p6n SLI-Fi mobo

    Hello, well this is what i've done so far:
    i have enabled raid in the bios
    setup both WD hdds to raid strip mode in the utility
    and now im on the part where i install the drivers while installing vista (the part where its at load driver)
    so the problem right now is. im trying to load the driver, but when browsed to load the driver, windows keeps telling me none is found.
    so this is what i have tried:
    i redownloaded the driver from a different server
    tried it using usb jump drive, usb floppy drive with a 1.44 mb floppy, and i even burned it to a cd rom drive.
    now i don't know the issue could be.
    any help?

    Installing the RAID Driver (for bootable RAID Array)
    1. After you complete the RAID BIOS setup, boot from the Windows CD, and the
    Windows Setup program starts.
    2. Press F6 and wait for the Windows Setup screen to appear
    3. Specify the NVIDIA drivers:
    (1) Insert the floppy that has the RAID driver, press S, then press Enter. The
    Windows Setup screen appears as below:
    (2) Select “NVIDIA RAID CLASS DRIVER” and then press Enter.
    (3) Press S again at the Specify Devices screen, then press Enter.
    (4) Select “NVIDIA NForce Storage Controller” and then press Enter. The following
    Windows Setup screen appears listing both drivers:
    4. Press Enter to continue with Windows XP Installation. Be sure to leave the floppy
    disk inserted in the floppy drive until the blue screen portion of Windows XP
    installation is completed, then take out the floppy.
    The above guide is for installing raid driver for bootable raid array

  • Help with downloaded install wizard.

    Hello,
    I just got a WRT54G2.  My computer's CD drives don't work so I am trying to install with the downloadable wizard. I downloaded it from this page: http://www.linksysbycisco.com/US/en/support/WRT54G2/download
    What I get is a .iso file and I have no idea how to make it run as a install wizard program.  I've been researching for a few hours and tried some programs but all they let me do it see the files but not run them to make the install wizard. 
    How do I run the downloaded install wizard?
    Thanks, 
    -Pascal
    Solved!
    Go to Solution.

    An .iso file is an image of a CD. Burn it to a cd-r with roxio or nero or whatever burning software you have. You can also try magic disc (freeware) which will mount the iso image to a virtual cd drive. Your best best is probably just to burn it to a cd. Hope that helps!

  • Help with WinXP install... Is VC the culprit?

    Recently, I purchased a whole new set of parts to build another computer.  I need help on how I can fix this thing, because WinXP Home SP1 doesn't want to complete the installation.  This is the setup as it is...
    Thermaltake XaserIII Midtower ATX
    Thermaltake Purepower 400v PS
    Temp sensor w/4 fan control
    Soyo KT600 Dragon Ultra Platinum
    AMD Athlon XP 3200+ Barton
    2x512mb Corsair DDR400
    Western Digital WD2000JD 200GB SATA HDD
    MSI FX5700 VT2DR256
    Sound Blaster Audigy 2 ZS Platinum
    HP DVD+R/+RW dvd200i
    Generic DVD ROM
    Generic FDD
    Soyo 6-in-1 card reader thingie  (Came with MB, no PCI plugs, just USB/1394)
    Microsoft Intellimouse Explorer Optical
    Some dumb Compaq explorer keyboard  (SK-2800C)
    Another crappy Compaq monitor  (MV520)
    Seagate 10GB HDD EIDE
    Klipsch ProMedia Ultra 5.1
    I listed everything that is inside and outside of my case.  I have the 10GB HDD just in case, and it's just a leftover from the old computer.  (It was a compaq if you didn't already guess)  I contacted Microsoft and spent some 10 total hours with them trying every damn thing possible to start this sucker up, and it still freezes.  (They say take it to a tech shop...  I don't have the time for that)  I am in the stage in the Win install where it starts to ask for info.  Reg#, name, time/date, etc.  It freezes anywhere between just after entering the Reg#, and until "Saving Settings", which I recall as the last step.  Then, the monitor either turns blank, or the system freezes completely.  It usually stalls out around the Registering Components section of this.  Can anyone help?  Any help would be GREATLY appreciated.
    Dave
    [email protected]

    It is a copy of XP Home SP1.  It isn't recovery diskettes...  Well, ladies and gentlemen...  My computer is finally seeking help...  It finally at least told me what it needs...  The following error messages popped up while I was out doing something, and here is what they are...
    First, from Washington DC, she likes long walks on the beach, walking her poodle, and playing in dumpsters...  Suitors, meet "Windows could not load the installer for Display.  Contact your hardware vendor for assistance."
    Next, from Long Beach, CA...  She loves the guys, the cars, and the money...  But don't think that makes her easy...  Meet "Windows could not load the installer for Monitor.  Contact your hardware vendor for assistance."
    Now, by display, does it reference to my VC or monitor?  Also, when the hell do I load the installer into the Windows installer?

Maybe you are looking for