Help with burning large project on dual layer DVD

Hi need help please.
I am busy with a SD 16x9 project 215 minutes long so I am trying to use dual layer DVD's. The project has a serious menu setup (well I think so), it starts with a intro and go's into the main menu with sub menu's and so on. my problems is the following:
if I burn a image all works well if I burn a disc from the image or using encore the menu once using a DVD player is very slow (the last half of the links on the time line) and some links get mixed up (if I press play dvd on the 3rd sub menu it somtimes starts in the correct place and somtimes it starts one link later).
is this caused by the break in the layer and what can I do to correct it or to get it better.
thanks
Darren

Are you using any motion menus? Have you exceeded the 1 gig limit for menus etc?
I assumed 16:9 and forgot to look before I started posting: it does not look like it, but be sure you don't have more than 18 buttons per menu (if it is 16:9).
With lots of short clips, break position should not be an issue. You can export to a folder and use imgburn which gives more control over layer breaks.
Even though complex, it all looks straight forward, and, even though I can't see the image detail, it looks okay. The most likely issue in such a project is that Encore got lost as you made changes/corrections. Sometimes they can be fixed. Other times, the solution is a do over. Newer versions for Encore appear more robust (fewer problems and more likely to fix problems), but no versions appear to be free of such issues.

Similar Messages

  • Project for dual layer DVD

    Hi there,
    I have a project which contains several individual sequences that have been compressed separately and which constitutes several parts of my future DVD.
    The total size is such that I need to burn a dual layer DVD.
    How do I determine where to include the marker indicating to switch layer ?
    I have done it before with a long project containing only one sequence, but this time the sequences are independent....
    Would DVDSP include automatically a "change layer" marker if I burn as is ?
    Thanks in advance
    Ivan

    I'd recommmend looking up "About Choosing a Dual-Layer Break Point" in the DVD Studio Pro user's manual or Help File.
    -DH

  • Blu Ray drive/burner can't write dual layer DVD - W500 Vista 64

    I recently did a clean Vista 64 Business install on a new hard drive. I pretty much have everything up and going, except the Blu Ray drive doesn't recognize that it can write dual layer DVDs. I ran Nero InfoTool and it, too, tells me that the drive cannot write dual layer DVDs. (Pretty much everything in InfoTool is checked, read and write, except all the HD-DVDs and the dual layer DVD write functions.) Does anyone have any ideas? My understanding is that the drive can write dual layer DVDs.

    I'll answer this with the same information that I posted at TPF:
    From: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70234
    Reads or writes data with speedy maximum data transfer rates of:
    * 16x maximum (writing to CD-R media)
    * 10x maximum (writing to CD-RW media)
    * 5x maximum (writing to DVD-RAM media)
    * 8x maximum (writing to DVD+/-R media)
    * 4x maximum (writing to DVD+/-RW media)
    * 2x maximum (writing to BD-R/RE SL media)
    * 1x maximum (writing to BD-R/RE DL media)
    * 24x maximum (reading CD-ROM, CD-R media)
    * 24x maximum (reading CD-RW media)
    * 8x maximum (reading DVD-ROM/-R/+R SL media)
    * 6x maximum (reading DVD-ROM/-R/+R DL media)
    * 6x maximum (reading DVD-RW/+RW media)
    * 5x maximum (reading DVD-RAM media)
    * 2x maximum (reading BD-ROM media)
    * 2x maximum (reading BD-R/RE SL/DL media)
    It appears that DL (dual layer) writing in DVD-R and DVD+R formats is not supported.

  • Playing dual layer dvd's with iBook superdrive

    I've burned a couple of dual layer DVD's (8.5GB) with my iBook G4 and an external Lacie DVD burner.
    I used Toast 7, experiencing no problems at all.
    The DVD's play perfectly using the Lacie driver itself, or my Sony DVD player, or even a 10-year-old Pioneer DVD drive on my PC.
    But... my iBook Superdrive refused to even read them.
    The disk just makes a couple of turns and then the superdrive ejects it with no message.
    The superdrive plays perfectly the commercial dvd's, which I know are usually double layered.
    Does that mean that superdrive is not compatible with burned dual layer dvd's?
    iBook G4; iPod 60GB v1.2.1; iTunes 6; Airport Xpress Mac OS X (10.4.4)
    iBook G4; iPod 60GB v1.2.1; iTunes 6; Airport Xpress   Mac OS X (10.4.4)  

    I don't believe the SuperDrive for the iBook is set
    up to read/write the dual layer DVD's.
    I didn't expect it to write DL DVD's, that's why I used an external burner.
    The problem is when reading the burned dvds
    Go to your Apple Menu and select "about this mac".
    Click on the "more info" button and navigate to the
    Disc Burning label. Select it.
    If your SD is dual layer compatible you'll see "+R
    DL".
    It says generically that SD reads DVDs
    What speed were you burning the Dual DVD's on the
    LaCie?
    don't know, really, but Toast is set to burn disks at the best speed:
    one was a DL DVD+R 8x, the other a DL DVD-R 4x
    it's IMPOSSIBLE that SD can't read dual layer DVDs: commercial DVDs are 6-7GB, they MUST be DL and they play perfectly.
    and if it really can't play burned DL DVDs, that's really a shame! >:-Z

  • Dual layer DVD in iDVD questions

    Hi,
    For now, I have a PB 12" with a single layer DVD burner. I plan to buy soon an iMac 24" which have a dual layer DVD burner.
    My questions have to do with dual layer thing.
    Every year I film a theater play that last for about 2h30m. So, with my single layer DVD burner, I have to split the movie in half, and burn it on 2 DVDs.
    Does a dual layer DVD would permit me to burn all the theater play on one DVD-DL so that I will be able to save the burning of the second DVD?
    In my actual configuration, I cannot choose in the project information a dual layer DVD to burn an image to. Is there a way of doing so, so that I'll be able to burn my theater play on my iMac later?
    Thanks for any help.

    Hi Steve@Mac
    Does a dual layer DVD would permit me to burn all the theater play on one DVD-DL so that I will be able to save the burning of the second DVD?
    Read over the following link and then post back if you still can't select Dual layer for your project. And yes you will be able to put the entire play on one DL DVD-R.
    http://discussions.apple.com/message.jspa?messageID=3974158#3974158
    Also to create a disc image:
    1. Choose File > Save As Disc Image.
    2. Type a name for the disc image.
    3. Choose where you want to store the disc image.
    4. Click Save.
    You can use Disk Utility in Mac OS X (or Roxio Toast) to burn the disc image to a DVD when you are ready. Use 4x or slower (slower is better).
    Click Here
    Here's some pricing info on DL Verbatim DVD-R (pretty reasonable I think).
    Good luck!
    SDMacuser

  • Dual-layer DVD problem

    I checked my settings and my MacBook Pro can burn dual-layer DVDs. I created a video in iMovie and burned it with iDVD on a Memorex dual-layer DVD. It appeared to burn with no problems. I attempted to play it in a relatively new DVD player. It spit out the disc and said "Disc Error." I attempted to play it on my Windows-based laptop. It recognized it as a DVD but couldn't play it.
    I then tried again with a Verbatim dual-layer DVD. Again, it appeared to burn with no problems, but refused to play. I even put it back in my Mac, and the menu came up, but it wouldn't play the video. I've checked and my firmware is updated for my Mac, which is a month old. I'm not sure what else to try.

    There may be a limited number of places to put a break point depending on the amount of material.
    Anyway you need to build the disc without formating. Then format the build - it is at that point in the Dialog you will see Black/Gray. The following movie shows where (note there is no break point shown in the movie, it jut s to point out where to look) Proper break points will be black the others which cannot be set as a breakk point will be grey
    http://dvdstepbystep.com/markers.mov
    This thread also can help
    http://discussions.apple.com/thread.jspa?messageID=6546274&#6546274

  • Backing up to Dual Layer DVDs

    Hi All,
    I hope this is the appropriate place for this post ...
    I'm trying to figure out how to burn to a DL (Dual Layer) DVD as a storage device. I'm using Toast Titanium V6.0.7 and i'm using a Lacie external DVD burner with DL capability but Toast doesn't recognize the total capacity of the blank DL DVD disc.
    Any ideas where to start? I don't know whether it might be the Lacie burner, Toast Titanium or some other issue i haven't thought of.
    Any help on where to start would be greatly appreciated.
    Paul

    DaddyPaycheck,
    Just after i posted my message i thought i'd pop in a DL DVD in the drive, open Toast and see again what Toast would do.
    Lo and behold, i check disk capacity in Toast and it shows the full 8GB. So i'm currently copying a 6GB DV file to the DL DVD ... so far so good. I want to see if it completes the task this time without errors.
    I'll know within 15 minutes whether it worked. Holding my breath ....
    Paul

  • Dual Layer DVD Support

    Does anyone know if the current iBook G4 14" (Dual USB, 1.42GHz) that comes with a SuperDrive standard, supports dual layer DVD media? I'm trying to find out on my system in System Profiler and in Toast drive features, but I can't seem to find out anywhere.
    DVD Drive: MATSHITA DVD-R UJ-845E, with support for R,-R,RW,-RW

    Theoretically, the UJ-845 is capable of burning dual-layer DVD+Rs, according to Panasonic/Matshita's specs. Apple disabled this feature in the firmware, however, in order to maintain product distinction between the iBooks and the Powerbooks. The dual layer-capable Powerbooks actually use a different model drive entirely, IIRC. As far as I know, there is no way to patch the drive to enable dual layer burning.
    Right now the Macs with dual layer burning capability are the new Powerbooks, the new iMac, and the Power Mac G5.

  • IBook read dual-layer DVDs?

    Does anyone know if the iBook G4 1ghz or higher can read dual-layer DVDs? Thanks.

    Do you mean home made dual later DVD-Rs or commercially pressed DVD movies that are dual layered? The answer to both should be "yes". However, the software used to burn a home made dual layer DVD-R may or may not be compatible with a Mac...
    -Doug

  • Dual Layer DVD's not burning with Disk Utility

    I successfully created two dual layer DVD's with a disk image that I created in iDVD. Checked both of those disks in a DVD player and both work fine. Now trying to burn more copies with the same procedure, same disk image file, same media manufacturer and all are failing. Any ideas? I can still successfully burn short videos on regular DVD's from iDVD so my burner has not completely failed. I had created a disk image out of the material that I need on the dual layer DVD because it's about 2 hours of video and iDVD was ejecting the disk too early without burning.

    Sounds like the burner may have failed. It can fail in a way that only larger items cannot burn. Take it to your nearest Apple Store or Apple Authorized Service Provider to have them check it out

  • Unable to burn Dual Layer DVD's with Toast

    Hi all,
    I'm having issues trying to burn dual layer dvd's with either Toast 10.0.8 or 11.0.1. I keep getting the Interface -50 error and sense key 0x02 error saying media is incompatible.
    I have tried dvd's by DataWrite and Elite M and they both show error. It's strange though as I have been using previously purchased Elite M dual layer dvd's of the same spec as these newly purchased ones, and they worked fine!
    My dvd drive is a standard OPTIARC AD-7170 that came with the Mac Pro as spec'd.
    I am able to burn single layer fine, and dual layers are read. I'm just unable to write dual layer at the moment.
    Any ideas? I'm stuck on what to do and what manufacturer's dual layer dvd's will work with this drive. It can just do +R DL.
    Could it be I've been unlucky to have had 4 bad batches? I brought 2 x 2 (25 disc) tubs of DataWrite and same by 50 disc tubs Elite M.
    Please help.
    Thanks,
    Ash
    P.s. I have tried creating a new admin user account to see if I am able to burn under that. I get the same errors.
    P.p.s. "Hopefully" this is just a media issue and I can find some that works again. If not and it is a drive fault what can I do? What writers spec'd same are available internal for my Mac Pro?
    Message was edited by: AshleySmith06

    Grant Bennet-Alder wrote:
    If think you may be using the wrong speed-range media for that drive's capabilities. As I mentioned, there are two ranges, and 8X media cannot be written in a 2.4x (sometimes referred to as 4x) drive.
    When you get an error message that actually tells you something concrete, you should listen to it:
    CANNOT WRITE MEDIUM - INCOMPATIBLE FORMAT
    ... is pretty unambiguous. It's a problem with the Media.
    Off-Brand media is the next weak link in the chain. One of their many problems is that they vary wildly from batch to batch. Verbatim media are thought to be the "gold standard". Get a small number of Verbatim Media and see if you can make ONE master on the best in the market. If you can, the problem is in the Media. If you can NOT, the problem is in the process.
    Like I mentioned I have never had issue with Elite M before, and I always set Toast to burn "Best" under the recorder settings.
    Here's what system profiler says for the disc and drive...
    OPTIARC DVD RW AD-7170A:
    Firmware Revision: 1.N8
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +R DL, +RW
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media:
    Type: DVD+R DL
    ID: UMEDISC DL1
    Blank: Yes
    Erasable: No
    Overwritable: Yes
    Appendable: Yes
    Write Speeds: 1x

  • Helpful info on burning to dual layer DVD's

    I had posted a couple of questions two weeks ago re: burning an idvd project to a dual layer DVD. Was successful in the end. Further to this, Larry Jordon's December newsletter (www.larryjordon.biz) includes a very informative article on burning dual layer DVD's. I recommend it highly. Each of his monthly newsletters have a lot of helpful tips on fcp etc. (and no, my last name isn't Jordon!!)

    Just for future reference, the correct address is: http://www.larryjordan.biz/. There was one letter off in the original posting.

  • Using an external dual layer DVD burner with iDVD??

    I created a 3 hour iDVD file on a dual 2.0 G5 desktop with a dual layer DVD Superdrive. I have since migrated to a MacBook Pro. Now, when I open the iDVD file, it says there is no DL Superdrive on my system and that it will convert the file to single layer or something like that, with the option to cancel or proceed. If I purchase an external DL DVD burner will iDVD detect it and allow me to continue working with the file?? Or do I have to get a whole other Mac with a DL Superdrive (iMac or 17" MBP)?? The error specifically stated 'Superdrive', so I am not sure if just an external DL will work. Thanks for any help.

    Sorry to have to post this here, but your topic "How can I see the bitrate while playing a DVD?" in the DVD SP forum.
    http://discussions.apple.com/thread.jspa?threadID=325516
    has been archived and no one can reply to it.
    Thank you so much. Using VLC 0.8.5 to view bitrate was an excellent discovery for those who don't have the cash to buy the DigiGami poducts.
    Perhaps you should re-open a new topic for others to respond to.

  • Incompatibility issues with Dual Layer DVD+R  help?

    I think I've made a serious mistake in believing I could author a Dual layer dvd for replication and sale on my own. I've spent over 14 months on this film, which is working perfectly in Encore, complete with extensive menus and transitional movies.
    I've done my best to transcode the media in the most compatible way (keeping bitrate below 7mbps and using dolby digital audio format) BUT I'm still having bad luck with MOST dvd players.
    The DVD plays properly on my cheap sony player, but both my toshiba and humax/tivo players failed to read the disc. (multiple tries/burns....or coasters, now) I've read that there are common problems with dual layer +R.
    MY QUESTION IS: what is the BEST POSSIBLE WAY to author/burn this project for mass replication? Can I really achieve the result I'm looking for with Encore or will I have to give up and go to a professional authoring house with DLT capability?
    Will I get the best result by burning from encore straight to disc OR burning an image or folder, then using a third party burning program?
    Thanks SO MUCH for any responses. This process has been soul-crushing.

    >The DVD plays properly on my cheap sony player, but both my toshiba and humax/tivo players failed to read the disc. (multiple tries/burns....or coasters, now) I've read that there are common problems with dual layer +R.
    Marc, the only mistake I think you are making is in assuming that set top players can handle a written DVD+R DL disc.
    Support in older players is at best sketchy.
    If the disc is working properly in at least one player, then you should be good to go.
    Replication will produce a different type of disc. One that
    i will
    play properly.
    Not all burners support book typing, and unless you know what you're doing here do not use these "fudges". It's best using Plextor, and even Benq burners. The freeware utility IMGBurn has this ability, and it also tells you what burners do this. I've never needed it personally, as my Pioneer burners & Denon players have no trouble with +R DL media.
    What you really need is a player that you
    i know
    plays DVD+R DL discs properly. Once you know your player is good with the format, then all other inconsistencies are player related, not authoring, and not your problem. There is simply no way at all you can guarantee any form of compliance with +R DL media, as there is nothing in the specs that says any set top player has to read these discs. Or -R DL where support is generally even worse.
    Whilst most players will read -R single layer & +R single layer, again there is no mandatory requirement to do so.
    You will need to get these
    i replicated
    and not duplicated. Duplication (burning) will result in a lot of returns, and a lot of wasted money.

  • How do I burn a dual layer DVD video with Premiere Elements?

    I am trying to burn a video from Premiere Elements to a dual layer DVD.   I choose  "DVD" -- and it seems to recognize my disc -- then I "fit to disk" (the video is one hour  -- then I attempt to burn -- and nothing happens.  I have tried it on my internal DVD and on my external BluRay --neither seems to work

    rross43
    If you insert a DVD double layer single sided disc in the burner tray, Premiere Elements recognizes that as such with Publish+Share/Disc/DVD disc. If you insert a DVD standard in the burner tray, Premiere Elements recognizes that for what it is.
    The only time you see a distinction for double layer vs standard disc is in the burn to folder.
    Both DVD disc types use the same max bitrate 8.00 Mbps. But, the DVD standard capacity is 4.38 GB not really 4.7 GB, and the DVD double layer single sided is 7.95 GB not really 8.5 GB. That has to do with the disc capacity labeling and not Premiere Elements.
    Good job with the burn to folder. In a time crunch, you can take the VIDEO_TS Folder from the saved folder and take it to DVD-VIDEO on DVD double layer single sided disc using the ImgBurn program.
    But, back to burn to disc....the successful burn to folder is pointing to the burner or the disc itself. What brand disc are you using?
    What is the mode of failure for your burn to disc....you say nothing happens. Does that mean you hit the burner button and nothing happens?
    We could look at deleting the Adobe Premiere Elements Prefs file or do a program uninstall, free ccleaner run through, reinstall with antivirus and firewall(s) disabled. But, let us review the burner and discs situation first.
    Thanks.
    ATR

Maybe you are looking for