Help with Business Cards

By using one of the templates I have created my business card in ONE of the template slots. Now, how do I get my card to apply to the whole page? Note: I have gone to the site recommended in a previous post:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=75&mforum=iworktipsn trick .
Sorry, but that makes no sense to me. When I click "select all" the entire sheet is selected, not just my card. I cannot find any way to select just my card to duplicate and drag. I can select portions of my card (text boxes, pictures, etc.) but have to drag them individually. How can I select just the one card in its entirety and duplicate it to the whole page.
Surely, there has to be an easy way. Heck, I'd take a hard way at this time. By the way, isn't there any way to use a blank template rather than trying to change everything around?

As a bit of background: I opened one of the business card templates, then made all of my changes to one card and saved it. That gave me the one card on the sheet that I created and nine cards that were created from the original template.
I was able to partially follow your instructions. I selected a single object, hit command+A, went to Arrange>Group and drug my card to one of the other positions. What I ended up with is my card superimposed on top of the card that was created in the template. If I tried to use the delete key, ALL cards were deleted, including the one I created. Also, my created card would not fit into the template slot. Lastly, how do you lock the cards?
I'm sorry to be so difficult, but this is becoming a very complex issue. Thank you for your help. I hope you have some other ideas that I can try.

Similar Messages

Help printing business cards

I created a standard size business card in Adobe Illustrator CS3. I have the paper and printer to print these cards, but cannot for the life of me figure out how to print more than one copy of the card on a sheet of paper.
I've poured through the printing options and the only thing I can think of would be to print the business card, then reposition the image in the print options and print again with the result of tiling the image down the page. However, this would be considerably time consuming since I want to print at least 100 business cards.
If anyone has any knowledge on this subject, help would be greatly appreciated.
Thanks much,
Rachael

James Talmage, "business card on A4" #1, 1 Jan 2006 7:15 am

Help with Smart Card (CAC) reader installation

Need help connecting my smart card reader to my Mac Book Pro. Either using Fire Fox, Explorer using Parallels with windows XP, or safari. I downloaded all the documentation from the Army AKO and still have problems with my Card reader.

Hi there, I have written a really good "How-to" on firefox and CAC and also Safari. You might also want to try VMware since Parallels and DoD really don't mix at this time. If yu have any question please let me know.
Jonathan
http://www.applemacgeniusville.com

Help with Business Contents 7.0

hello everyone,i need help with this question if i want to install a business content cube ok but i want bi 7.0 way how can i do that? either let me know or point me to a link. i tried to search by different keywords but i couldnot find anything. thanks.

Hello,
I am New to BI myself, please correct me if im wrong, but i thought that after you replicate metadata on the sap system it will prompt you to pick if you want to create it as 7.0 RSDS, or keep it as 3.x isfs, also an option to creaate one of each. Please let me know if this helped out so I know if im on the right track.
Thanks,
Niraj

Color issues with Business Cards and Vista Print (Ps & Ai)

So I use Vista Print for my business cards, quick, easy and affordable.
I had some graphics that could not be reproduced in Ai very easily so I downloaded the Vista Print .PSD template and worked off of that.
When the cards came in color was correct but the font was not good. Not very clear and there was digital noise around the edges, so not crisp.
So I downloaded the Ai template from VP, reproduced the card in Ai and just dropped the logo in on the canvas and redid all the text in Ai.
When I got these cards in, the font looked much better and crisp, but all my colors were off. My navy blues were not navy-purplish looking. Side by side, it was a big difference.
I didn't change any color profiles I even made sure the CMYK values from the original photoshop file matched exactly to the Ai file.
So question is, why would the Ai file print differently if the CMYK color values were the exact same? It makes no sense to me. Was it perhaps how I saved the Ai files? There are so many options when saving it's a bit overwhelming.

Believe it or not, the Vista Print cards could be color copies. Try and post a screen shot of each card so we can see the differences. Not sure how you proofed the card redo out of Illustrator and/or what you used to print the redo card. The problem with Vista Print is quality control. You say the card color is accurate in the VP cards. However, did you proof the card before sending it to VP? If you did, how?

HT1349 how can I merge the information with business cards

im making business cards and instead of typing the same thing a million times, im sure there's a way to merge or something. How do I do this?

laurenfromky wrote:
im making business cards
With what app?

Need help with graphics card options for an early 2008 mac pro

Hello,
   I have an early 2008 mac pro with 2 x 3.2 GHz quad core Intel Xeon and 6Gigs of ram, currently running with an Nvidia Geforce 8800 GT with 512mb.
    It is also running 10.7.2.
   I would like to either add a video card on top of the one I am currently running or replace it completely if necessary.
   I do video editing on the Mac, no gaming and only a small amount of photoshop, and as the resolutions get larger I would like to have my machine keep up.
   My questions are,
     1. What cards would you the community suggest?
     2. Can I add a whole other card to my system or do I have to replace the current one?
     3. If I can hold two cards what special accomidations would be needed in regards to final cut performance if any?
    Thank you for any help you would like to give.
Rob

The two main cards for mac pros are the apple versions of the ATI Radeon 5770 and 5870.
The 5770 requires one aux power adaptor and the 5870 requires two. So generally you could only have one 5780 or two 5770's.
Video cards which don't require aux power should be able to coexist with these cards so log as it's all within the power supply maximums of course.

Help with Graphics card purchase

I'm planning on buying a new graphics card for my creaky old Mac (G4 400 MHz PowerPC, CRT display, running Tiger). Mainly because I do a lot of 3D modelling/rendering work and I think it would improve the experience I have with the apps that I use daily. Apart from not being up to spec for modern games graphics my Mac works pretty darn well (probably because I have a shed-load of RAM), so I'm not planning on getting a new Mac any time soon. I just want to cheaply soup-up this one.
I'm looking at getting either the 'ATI Radeon 9600 Pro - Mac', or possibly the cheaper 'ATI Radeon 9200 Mac Edition'.
After looking online I have seen that users of both have reported some problems. The 9600 has been reported not to work with some displays and the 9200 has been reported to make DVD act really badly.
So my questions are roughly:
Have these issues been resolved? Have you experienced any problems upgrading your old Mac with these cards? Would these cards make a marked difference to my 3D modelling/rendering apps? What graphics card would you recommend?
Thanks in advance.

Does your Mac use a AGP (Advanced Graphics Processor) slot?
Based on the 400MHz you mentioned, is is probably a "Gigabit Ethernet" model, which has a 2X AGP slot.
If not, your only option is the ATI Radeon 9200 128 MB PCI Mac Edition card. I hadn't heard about any DVD playback problems with this card. ATI says it will not work with OS 9 in G4 "Digital Audio" and "Gigabit Ethernet" models.
If you do have AGP you definitely want to use it. The ATI Radeon 9800 Pro Mac Edition 256MB AGP works with 2X or 4X AGP models. This card will give the best performance.
The ATI Radeon 9600 Mac & PC Edition 256MB is for 4X or 8X AGP slots. Even if you do have a 4X AGP slot, this card may not work in your system because of its power consumption. ATI says it is not compatible with "Digital Audio" and "Quicksilver" models. That leaves the MDD (Mirrored Drive Door) as the only G4 model with 4X AGP that it will work in reliably.

Help With Credit Cards In Incoming Payments

Hi All,
SAP Business One 8.81 PL05
When I am creating an Incoming payment and I have selected my invoices and then select the payment means and put in my bank transfer amount. I then go to the credit card tab and put through a claim there which goes to a claims GL account. I put in the Credit Card No. 1 and in Valid Until I put 12/12 I fill in the rest of the fields and when I try and add the Incoming payment I get the following error.
Date deviates from permissible range [Journal Entry - Rows - Value Date][line: 3] [Message 173-11]
If I take out the Credit Card part of the payment the Incoming Payment can be added therefor the problem must be with the Valid Until field. I have tried various different dates in there and still receive the same error.
Under my Credit Card Payment Method I have created on called Claims and set it to Voucher Date Of Receipt with the following fields. From 1 To 31 On Day 1 Months + 12
Could somebody please tell me what I am doing wrong.
Any help will be greatly appreciated.
Regards,
Quinn

Hi Jitin,
Thanks for the reply.
The posting date is current date and due date is current date as is document date.
All posting periods are unlocked.
If I take out the Credit Card part the Incoming Payment gets added without any errors. Therefor I think my posting periods are fine.
Regards,
Quinn Verburgt

Thinkpad t420s - Help with video card on Ubuntu 11.04

Hi,
I just purchsed a Lenovo t420s with the following system specs:
Intel Core i7-2620M Processor (2.70GHz, 4MB L3,1333MHz FSB) with Intel
14.0" HD+ (1600 x 900) LED Backlit Antiglare Display, Mobile Broadband Ready
NVIDIA Quadro NVS4200M Optimus technology (1GB)
6 GB PC3-10600 DDR3 SDRAM 1333MHz SODIMM Memory (2 DIMM)
128GB Solid State Drive, Serial ATA
Intel WiFi Link 1000
It's a really good machine, but unfortunately I am having problems making it work with Ubuntu 11.04. I am a long-term Linux user, a python developer and a supporter of open source software, I cannot use Windows for my purposes and I need help to enable my vide card drivers.
I did a fresh install of Ubuntu 11.04 on my system, and updated all packages. I then installed the ltest Nvidia drivers available, and ensured that Optimus is disabled in the BIOS. After rebooting, nvidia-settings complained that my system isn't configured to rnu the drivers and I must run nvidia-xconfig so I did.
After running nvidia-xconfig, my system wouldn't want to run Xorg, and stayed in terminal mode. I checked the xorg log and found this:
(!!) More than one possible primary device found
(II) Primary Device is:
(EE) No devices detected.
Fatal server error:
no screens found
I saw something about this error here : ftp://download.nvidia.com/XFree86/Linux-x86/270.41.03/README/README.txt
I am running version 1.7 ov xorg, so this should be fixed. I tried to nvidia-xconfig --enable-all-gpus but it still wouldn't work.
The Ubuntu market is now at about 15 million Desktop users, and many more with other Linux distributions, I think Lenovo would greatly benefit by contributing to Ubuntu and helping the software be compatible with the hardware they sell.
Could someone please help me with this?
Kind regards,
Benoit

This will not help, but I recently tried 11.04 on a
Z560 (with just intel graphics) and had no luck
getting it to work. Previous versions work fine.
Is there any other linux distro that will serve your purpose?

Need help with Business One Implementation Consultant Certification

Hello,
I need help preparing for the B1 certification. I have taken the test once already and failed. I found it very tricky with multiple correct answers for each question.
I have gone thru the eLearning several times now. And this week I am taking the instructor led training. I have also purchased and studied the Ebook. I have a good grasp of the product, but I feel that this is not enough to help prepare for the test.
I want to know if there are any other resources I could use to help prepare for the test. Are there any practice exams
Any and all help is appreciated
Thank you!
John
jseftonATsophlogic.com

Hi John,
I found the e-learning good , but a bit limited, so I branched out to these & passed quite well :
- documentation links on the 2007 landing page:
Channel Partner Portal -> Solutions -> SAP Business One -> Hot Topics -> 2007
- ETS:
Channel Partner Portal -> Solutions -> SAP Business One -> Support -> Training & Knowledge
- DRC:
Channel Partner Portal -> Solutions -> SAP Business One -> Support -> Documentation resource centre
Hope it helps & good luck!
All the best,
kerstin

Need help with Business One Certification

Hello,
I need help preparing for the B1 certification. I have taken the test once already and failed. I found it very tricky with multiple correct answers for each question.
I have gone thru the eLearning several times now. And this week I am taking the instructor led training. I have also purchased and studied the Ebook. I have a good grasp of the product, but I feel that this is not enough to help prepare for the test.
I want to know if there are any other resources I could use to help prepare for the test. Are there any practice exams
Any and all help is appreciated
Thank you!
John
jseftonATsophlogic.com

Hi John,
when I was studying for the 2007 certfication I found the info in the DRC & the ETSs very good.
Channel Partner Portal -> Solutions -> SAP Business One -> Solution Overview -> Additional Resources -> Documentation Resource Centre
There was also a lot of info on the Landing pages:
Channel Partner Portal -> Solutions -> SAP Business One -> Hot Topics-> SAP Business One 2007 information centre -> lots of links to individual landing pages, pdfs etc.
Good Luck!
All the best,
Kerstin

Help with Business Catalyst Web forms and Adobe Muse.

I created a websform to log into a secure zone using business catalyst. I pasted the webform's html into Adobe Muse. After publishing my site. The websform I created in business catalyst is deleted, but I can see all of the forms that I created using Muse in the webform section. Is there a fix for this problem? Thanks
This is the page with the forms. http://www.highestgoodclothing.com/login.html

There is a workaround. It takes a little more work, but it is definitely worth it and will solve your problem. I subscribed and learned from tutorials on the www(.)trainsimple(.)com. They have a video series called "Muse CC Business Catalyst Integration" which was very helpful. The issue that everyone on here is referring to is covered in the 3 videos labelled, "Email Sign Up Checkbox", "Moving Muse Webforms to Business Catalyst" and "Email Marketing".
Essentially, what you want to do is create a form in Business Catalyst, turn that form into a module, assign a tag to that module, then put the tag into Muse using Object > Insert HTML. This will solve Muse deleting the web forms everytime.

Help with acs cards

hi!
is it possible for us to link java to visual basic.net? we purchased acs sdk from hong kong. we already programmed the cards using visual basic.net, the problem is we need to get some of the data in the cards using java because our main application is java. we have a password in the smart card, and that password is needed in the java application to run our application.
thanks for the help.

Hi,
You can use any layer that can allow you to access to your card data.
On Windows platform as well on Linux, you can access your card through pc/sc. It's quite straight forward to build a librairy based on that.
From java, there are few APIs that have been developped:
- JPCSC: analog to pcsc but which is a Java interface to pcsc on the system
- OCF: dead project
- Smart Card io API from Mustang release: same as JPCSC and quite low level as well
- Jaccal: is a interface with pcsc as well but allow you to be at higher level as well for you not to bother about any session opening or APDU building.
This is the advantage of Jaccal comparing to JPCSC and the Smart Card io API, Jaccal can sits actually on top of these two layers.
Regards,
Thomas
http://jaccal.sourceforge.net/

Help with Note cards?? I thought I could do them with this program...

Help! I purchased Adobe Photoshop Elements 12 back in September, but due to computer problems and working on other projects, I just got started using it. Or at least I'm trying to!
My main (read: pretty well ONLY) reason for purchasing was that I thought I could make note cards (photo on front, folded, like a blank card, but with one of my photos on the front) for personal use and Christmas gift for my aunt who writes a lot of notes. I really wanted to create a special gift for her, as well as unique cards for my own use.
But when I open the program and click "Create" all I see is Greeting Cards! And when I click on it, I don't see anything like what I want to create! Help! Is there any way to create this type of card with this program? Or at least close? I would really appreciate ANY and ALL help!!!
Thanks!

Hi,
You can try going to finder, hitting CMD + F and below search this mac, you should see kind. You can try switching that contents and the second option to documents.
Hope this helps,
Zevie

Help with Business Cards

Similar Messages

Maybe you are looking for