Help with Buttons on MIDlet application
Hi,
I'm writing a game on MIDP using Netbeans' cellular simulator.
How can I make buttons on the screen? those buttons should have the ability for the user click on them & then
the screen would be change (using by ActionListener).I know that on GUI I should write it as many JButtons in the place
where the game board should be at, but what should be written when using MIDP and how to connect to it a "Listener"?
Hi,
the philosophy used for application design and development on mobile devices differes from desktop design and development. And using the Java ME has some specifics and limitations. You have basicly 3 options to develop your applications:
1) use high level API screens - List/Form - in this case the application will look differently on every device and usually not too good and you can't control formatting of the output, but the development is very fast and easy
2) use existing graphical libraries - like LWUIT - good choice for many applications (but games), gives you rich API (in relation to the native List/Form) with good results - it's only slightly more complicated and the result is significantly better
3) build your own UI on Canvas - you can display whatever you want... but you must fully implement it
Every next option needs more effort but gives you more freedom in application design and development.
I know that I didin't answer exactly what you asked for, but I'm sure that this answer makes more sense...
Rada
Similar Messages
-
hi all,
i'm new to flash but i have an idea whats going on with webpages. I need some help with buttons! i have a website and its has a stage and 9 different flv's (screens). I've been trying to read online and i can't find out how to navigate to different screens, example below
home | |
about us | stage |
contact | |
you click one one button it updates the stage. also i'm using actionscript 2.0.
thanks for any help ahead of time
Thank you,Is it a wi-fi or cellular connection that isn't working? If its wi-fi and other people/computers/phones can connect check your settings. If its cellular, are other people's phones (on the same carrier) working in the same location? If other people can't connect then it is likely a network problem. If others can you may need to reset/restore you iPhone.
-
Help with port forwarding to application
Help needed to Port Forward on to my PS3.
I need to forward the following ports:
UDP: 3074; 3659; 6000
TCP: 80; 443; 3659; 10000 - 10099; 42127
Have previously given the PS3 a static IP, set the port forwarding rules and then forwarded to the IP address, but it appears the ports have not opened as expected.
Help KeithI can only see one image which just shows the application mapping, but no indication as to whether you had clicked the "apply" button.
Why are you forwarding ports 80 and 443, are you running a webserver on the PS3, as those ports are used for web serving.
As a matter of interest, your port 80 is showing as open at the moment, so is the PS3 turned on, or is port 80 mapped to something else instead?
What I would like you to do is to start from the beginning, with just the single TCP port number 3659 assigned to the PS3.
It will mean removing the other assignments, but it will make things a bit easier.
If you could do that please, and then we can do some tests.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
I am a novice and have just completed my first animated movie. I need help with action script.
The movie is currently looped and I have created and invisible button the size of the frame with the intention that a user can click on the movie image to stop it and on second click continue the movie from where it stopped.
I have used the AS event handler method to stop the movie. I have tested it and it works. But I cannot figure suitable code to restart the movie.
Two questions;
1. am I going about the task the right way? (should I use two buttons, one stop, one start)?
2. if my approach is feasible, can anyone give me the correct AS to re-start the movie and put me out of my misery please?you can use the following after changing "yourbutton" and "yourmovieclip" to use suitable instance names:
yourbutton.onRelease=function(){
if(!this.toggle){
yourmovieclip.stop();
} else {
yourmovieclip.play();
this.toggle=!this.toggle; -
Help with after effects cc application manager error
ok i have a issue when i install adobe after effects cc it comes up with cant start trial application manager is damaged or corrupted and i downloaded adobe aplication manger 8 and it gives me this error
does anyone have any ideas as i lost on what to do now
thanks in advance elfenAfter checking we performed the test Next:
Remove all fonts except the original.
Test opening After Effects project => OK
Then we submitted the most used by the graphics progessivement fonts.
The problems is many Fonts, Thanks for your help Will
Cdlt -
Please help with developing a simple application
I have small reference book that is falling apart, that I can no longer get a copy of, and would like to get it put onto my iphone. It's a book I use often.
I just want to be able to put in a number or title name and have the app find the text. I'm prepared to enter all the text, but have no idea where to go from there. It's only for mine and my brother's use, so not worth paying for it to be done.
Can anyone help me?
Thanks in advance,
Kerrie.Hi Kerrie,
The resources provided here: http://developer.apple.com/ will help you create an iPhone application.
If you don't want to create the app yourself, you can look for a consultant here: http://consultants.apple.com/
-Jason -
Help with playing sound in applications
im new to java and i was practicing playing sound in a swing application but the problem is that when i press the play button no sound is played...here is my code
import javax.swing.*;
import java.applet.AudioClip;
import java.awt.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.net.MalformedURLException;
import java.net.URL;
import java.io.File;
public class JukeBox extends JFrame {
private JLabel label;
private JPanel panel, buttonPanel;
private JComboBox playList;
private JButton play, stop;
private URL url1, url2, url3, url4, url5, url6;
private AudioClip[] musicList;
private AudioClip current ;
public JukeBox() {
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
setSize(500, 120);
setLocation(50, 50);
setTitle("JAVA JukeBox");
url1 = url2 = url3 = url4 = url5 = url6 = null;
current = null;
try {
url1 = new URL("file", "localhost", "C:\\Documents and Settings\\KADA\\IdeaProjects\\Sound\\bottle-open.wav");
url2 = new URL("file", "localhost", "C:\\Documents and Settings\\KADA\\IdeaProjects\\Sound\\BP2.mp3");
url3 = new URL("file", "localhost", "C:\\Documents and Settings\\KADA\\IdeaProjects\\Sound\\fhm.aiff");
url4 = new URL("file", "localhost", "C:\\Documents and Settings\\KADA\\IdeaProjects\\Sound\\jungle.rmf");
url5 = new URL("file", "localhost", "C:\\Documents and Settings\\KADA\\IdeaProjects\\Sound\\spacemusic.au");
url6 = new URL("file", "localhost", "C:\\Documents and Settings\\KADA\\IdeaProjects\\Sound\\trippygaia.mid");
} catch (MalformedURLException e) {
e.printStackTrace(); //To change body of catch statement use File | Settings | File Templates.
musicList = new AudioClip[7];
musicList[0] = null;
musicList[1] = JApplet.newAudioClip(url1);
musicList[2] = JApplet.newAudioClip(url2);
musicList[3] = JApplet.newAudioClip(url3);
musicList[4] = JApplet.newAudioClip(url4);
musicList[5] = JApplet.newAudioClip(url5);
musicList[6] = JApplet.newAudioClip(url6);
label = new JLabel("JAVA JukeBox", JLabel.CENTER);
String[] musicList = {"select a track..."
, "bottle open"
, "bitch please II"
, "flutte, harmonica, mambo"
, "jungle"
, "spacemusic"
, "trippygaia"};
playList = new JComboBox(musicList);
playList.addActionListener(new ListListener());
play = new JButton("Play");
play.setActionCommand("play");
play.addActionListener(new ButtonListener());
stop = new JButton("Stop");
stop.addActionListener(new ButtonListener());
buttonPanel = new JPanel();
buttonPanel.setLayout(new BoxLayout(buttonPanel, BoxLayout.X_AXIS));
buttonPanel.add(play);
buttonPanel.add(stop);
panel = new JPanel();
panel.setLayout(new BoxLayout(panel, BoxLayout.Y_AXIS));
panel.add(label);
panel.add(Box.createRigidArea(new Dimension(0, 5)));
panel.add(playList);
panel.add(Box.createRigidArea(new Dimension(0, 5)));
panel.add(buttonPanel);
getContentPane().add(panel);
private class ButtonListener implements ActionListener {
public void actionPerformed(ActionEvent e) {
if(current != null){
current.stop();
if(e.getActionCommand().equalsIgnoreCase("play")){
if(current != null){
current.play();
private class ListListener implements ActionListener {
public void actionPerformed(ActionEvent e) {
if (current != null) {
current.stop();
current = musicList[playList.getSelectedIndex()];
public static void main(String[] args) {
setDefaultLookAndFeelDecorated(true);
JukeBox jb = new JukeBox();
jb.setVisible(true);
jb.setResizable(false);
}can u please tell me whats wrong with my code coz i cant hear no sound when i press the play button and can u please tell me why i cant simply put the file name in the URL instead of the complete path although the files are in the same directory of the source code and can i play mp3 using this little program ???
plz help...im a newbie so plz explain as much as u can...After
musicList = new AudioClip[7];
musicList[0] = null;
musicList[1] = JApplet.newAudioClip(url1);
musicList[2] = JApplet.newAudioClip(url2);
musicList[3] = JApplet.newAudioClip(url3);
musicList[4] = JApplet.newAudioClip(url4);
musicList[5] = JApplet.newAudioClip(url5);
musicList[6] = JApplet.newAudioClip(url6);initialise the variable current with
current = musicList[1];or similar because the AudioClip current always == null in your code so your listener blocks don`t execute.
regards -
Hi there... I need a little help with buttons and their actions using flex builder 4.5
I run a repo company and have zero experience in the developing applications and I could use some help from anybody that is willing to give it.... Here is a basic idea of what I need... let's say there are 3 states... state 1 has a question that says "car you read this?" and a "yes" and a "no" button... when you select either answer, you go to slide 2. Slide 2 with have a question like "Is the sky brown?" and a "yes" and a "no" button and when either button is selected, you are taken to Slide 3. Slide 3 needs to be some sort of a text form that is created by the user selecting the buttons and the screen would say something like "yes, i can read this. no, the sky is not brown", or "no, I can't read this. yes, the sky is brown" . I know how to get the buttons to take the user to the correct new slide, but I do not know how to get the buttons to insert specific text somewhere else when any button is selected.... Can anybody help me? Youtube is only getting me so far, and my kids are driving me nuts while I'm trying to figure this monster out... I've gotten several slides created and some screens have several buttons, I just need to see what I need to put in the code to get it to do this type of function
Also where can I read up on setting my .Xdefaults and xmonad.hs file? I ripped someones from this forum, and it works nice, but I want to make my onw, but cant find any decent documentation. Thanks.
At the moment, the best source for configs are those posted in the screenshots thread (for both Xdefaults and xmonad.hs), the xmonad config archive (and the available docs from the root page on that site), and our own thread. Unfortunately you'll have to sort of scrounge for good docs on the xmonad.hs at the moment, since most of the information was written for the 0.4 version of xmonad. The configuration has since been made MUCH simpler.
Hope that helps some. -
Help with buttons in photo gallery
Hello all
I am trying to find a more effeicent way to place buttons on each of my pages (Photo Gallery SIte). I have 150 pages and constantly have to link each button to the "next" or "last" button. Is there a more efficent way to for me to ad butons to each page.My site is Blazinginterest.com
Please give me some feedback on my site, possibly add a picture viewer?
Thank you, HDwhat code do you already have? Maybe we can help you modify
it where it's not working.
Also, how do you have it currently laid out? eg. do you have
several images on the screen, but some method to scroll through
other images? Have you done a search here or on director-online.com
(in the forum or articles section) on similar questions? Do you
have something written up to describe what features you need such
as a design document?
Just trying to get a sense of your level of programming in
general, experience with Director and what planning/details you
have worked out so far because there are so many different ways to
program a gallery. -
Urgent need of help with a java WSDL application
Hello,
I'm trying to turn a WORKING java application which uses some webservices, into a JAR file.
Somehow i keep on getting the same errors all the time.
I added all the necessary jar files, which are used in the program, in the global JAR file, but still the error remains.
Can anyone help me with this error? (Error see below, WARNING EXTREMELY LONG!)
---------------------------------------------------------------- ERROR MESSAGE --------------------------------------------------------------------
standard type mapping initialization error: javax.xml.rpc.JAXRPCException: javax
.xml.soap.SOAPException: Unable to create SOAP Factory: Provider com.sun.xml.mes
saging.saaj.soap.ver1_1.SOAPFactory1_1Impl not found
at oracle.j2ee.ws.client.BasicService.createLiteralMappings(BasicService
.java:282)
at oracle.j2ee.ws.client.BasicService.createStandardTypeMappingRegistry(
BasicService.java:244)
at test.proxy.runtime.RegistrationWS_Service_SerializerRegistry.getRegis
try(RegistrationWS_Service_SerializerRegistry.java:26)
at test.proxy.runtime.RegistrationWS_Service_Impl.<init>(RegistrationWS_
Service_Impl.java:26)
at java.lang.Class.newInstanceImpl(Native Method)
at java.lang.Class.newInstance(Class.java:1300)
at oracle.j2ee.ws.client.ServiceFactoryImpl.createService(ServiceFactory
Impl.java:92)
at oracle.j2ee.ws.client.ServiceFactoryImpl.loadService(ServiceFactoryIm
pl.java:121)
at test.Main.test(Main.java:21)
at test.Main.<init>(Main.java:10)
at test.Main.main(Main.java:14)
CAUSE:
javax.xml.rpc.JAXRPCException: javax.xml.soap.SOAPException: Unable to create SO
AP Factory: Provider com.sun.xml.messaging.saaj.soap.ver1_1.SOAPFactory1_1Impl n
ot found
at oracle.j2ee.ws.client.BasicService.createLiteralMappings(BasicService
.java:282)
at oracle.j2ee.ws.client.BasicService.createStandardTypeMappingRegistry(
BasicService.java:244)
at test.proxy.runtime.RegistrationWS_Service_SerializerRegistry.getRegis
try(RegistrationWS_Service_SerializerRegistry.java:26)
at test.proxy.runtime.RegistrationWS_Service_Impl.<init>(RegistrationWS_
Service_Impl.java:26)
at java.lang.Class.newInstanceImpl(Native Method)
at java.lang.Class.newInstance(Class.java:1300)
at oracle.j2ee.ws.client.ServiceFactoryImpl.createService(ServiceFactory
Impl.java:92)
at oracle.j2ee.ws.client.ServiceFactoryImpl.loadService(ServiceFactoryIm
pl.java:121)
at test.Main.test(Main.java:21)
at test.Main.<init>(Main.java:10)
at test.Main.main(Main.java:14)
Caused by: javax.xml.rpc.JAXRPCException: javax.xml.soap.SOAPException: Unable t
o create SOAP Factory: Provider com.sun.xml.messaging.saaj.soap.ver1_1.SOAPFacto
ry1_1Impl not found
at oracle.j2ee.ws.common.encoding.literal.LiteralFragmentSerializer.<ini
t>(LiteralFragmentSerializer.java:95)
at oracle.j2ee.ws.common.encoding.literal.LiteralFragmentSerializer.<ini
t>(LiteralFragmentSerializer.java:62)
at oracle.j2ee.ws.common.encoding.literal.StandardLiteralTypeMappings.<i
nit>(StandardLiteralTypeMappings.java:198)
at oracle.j2ee.ws.client.BasicService.createLiteralMappings(BasicService
.java:280)
... 10 more
Caused by: javax.xml.soap.SOAPException: Unable to create SOAP Factory: Provider
com.sun.xml.messaging.saaj.soap.ver1_1.SOAPFactory1_1Impl not found
at javax.xml.soap.SOAPFactory.newInstance(SOAPFactory.java:33)
at oracle.j2ee.ws.common.encoding.literal.LiteralFragmentSerializer.<ini
t>(LiteralFragmentSerializer.java:93)
... 13 more
CAUSE:
javax.xml.rpc.JAXRPCException: javax.xml.soap.SOAPException: Unable to create SO
AP Factory: Provider com.sun.xml.messaging.saaj.soap.ver1_1.SOAPFactory1_1Impl n
ot found
at oracle.j2ee.ws.client.BasicService.createLiteralMappings(BasicService
.java:282)
at oracle.j2ee.ws.client.BasicService.createStandardTypeMappingRegistry(
BasicService.java:244)
at test.proxy.runtime.RegistrationWS_Service_SerializerRegistry.getRegis
try(RegistrationWS_Service_SerializerRegistry.java:26)
at test.proxy.runtime.RegistrationWS_Service_Impl.<init>(RegistrationWS_
Service_Impl.java:26)
at java.lang.Class.newInstanceImpl(Native Method)
at java.lang.Class.newInstance(Class.java:1300)
at oracle.j2ee.ws.client.ServiceFactoryImpl.createService(ServiceFactory
Impl.java:92)
at oracle.j2ee.ws.client.ServiceFactoryImpl.loadService(ServiceFactoryIm
pl.java:121)
at test.Main.test(Main.java:21)
at test.Main.<init>(Main.java:10)
at test.Main.main(Main.java:14)
Caused by: javax.xml.rpc.JAXRPCException: javax.xml.soap.SOAPException: Unable t
o create SOAP Factory: Provider com.sun.xml.messaging.saaj.soap.ver1_1.SOAPFacto
ry1_1Impl not found
at oracle.j2ee.ws.common.encoding.literal.LiteralFragmentSerializer.<ini
t>(LiteralFragmentSerializer.java:95)
at oracle.j2ee.ws.common.encoding.literal.LiteralFragmentSerializer.<ini
t>(LiteralFragmentSerializer.java:62)
at oracle.j2ee.ws.common.encoding.literal.StandardLiteralTypeMappings.<i
nit>(StandardLiteralTypeMappings.java:198)
at oracle.j2ee.ws.client.BasicService.createLiteralMappings(BasicService
.java:280)
... 10 more
Caused by: javax.xml.soap.SOAPException: Unable to create SOAP Factory: Provider
com.sun.xml.messaging.saaj.soap.ver1_1.SOAPFactory1_1Impl not found
at javax.xml.soap.SOAPFactory.newInstance(SOAPFactory.java:33)
at oracle.j2ee.ws.common.encoding.literal.LiteralFragmentSerializer.<ini
t>(LiteralFragmentSerializer.java:93)
... 13 more
---------------------------------------------------------------- ERROR MESSAGE --------------------------------------------------------------------I face this same problem too, I have a jar which calls a webservice and I want to execute it from windows command , I get the following error when I use the command : java -cp Has.jar moicr.Main
standard type mapping initialization error: javax.xml.rpc.JAXRPCException: javax
.xml.soap.SOAPException: Unable to create SOAP Factory: Provider com.sun.xml.mes
saging.saaj.soap.ver1_1.SOAPFactory1_1Impl not found
at oracle.j2ee.ws.client.BasicService.createLiteralMappings(BasicService
.java:282)
at oracle.j2ee.ws.client.BasicService.createStandardTypeMappingRegistry(
BasicService.java:244)
at has.proxy.runtime.JoPayWebServiceService_SerializerRegistry.getRegist
ry(JoPayWebServiceService_SerializerRegistry.java:26)
at has.proxy.runtime.JoPayWebServiceService_Impl.<init>(JoPayWebServiceS
ervice_Impl.java:26)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct
orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC
onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at java.lang.Class.newInstance0(Class.java:350)
at java.lang.Class.newInstance(Class.java:303)
at oracle.j2ee.ws.client.ServiceFactoryImpl.createService(ServiceFactory
Impl.java:92)
at oracle.j2ee.ws.client.ServiceFactoryImpl.loadService(ServiceFactoryIm
pl.java:121)
at has.proxy.JoPayWebServiceClient.<init>(JoPayWebServiceClient.java:18)
at moict.Main.confirmPayment(Main.java:142)
at moict.Main.main(Main.java:93)
CAUSE:
javax.xml.rpc.JAXRPCException: javax.xml.soap.SOAPException: Unable to create SO
AP Factory: Provider com.sun.xml.messaging.saaj.soap.ver1_1.SOAPFactory1_1Impl n
ot found
at oracle.j2ee.ws.client.BasicService.createLiteralMappings(BasicService
.java:282)
at oracle.j2ee.ws.client.BasicService.createStandardTypeMappingRegistry(
BasicService.java:244)
at has.proxy.runtime.JoPayWebServiceService_SerializerRegistry.getRegist
ry(JoPayWebServiceService_SerializerRegistry.java:26)
at has.proxy.runtime.JoPayWebServiceService_Impl.<init>(JoPayWebServiceS
ervice_Impl.java:26)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct
orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC
onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at java.lang.Class.newInstance0(Class.java:350)
at java.lang.Class.newInstance(Class.java:303)
at oracle.j2ee.ws.client.ServiceFactoryImpl.createService(ServiceFactory
Impl.java:92)
at oracle.j2ee.ws.client.ServiceFactoryImpl.loadService(ServiceFactoryIm
pl.java:121)
at has.proxy.JoPayWebServiceClient.<init>(JoPayWebServiceClient.java:18)
at moict.Main.confirmPayment(Main.java:142)
at moict.Main.main(Main.java:93)
Caused by: javax.xml.rpc.JAXRPCException: javax.xml.soap.SOAPException: Unable t
o create SOAP Factory: Provider com.sun.xml.messaging.saaj.soap.ver1_1.SOAPFacto
ry1_1Impl not found
at oracle.j2ee.ws.common.encoding.literal.LiteralFragmentSerializer.<ini
t>(LiteralFragmentSerializer.java:95)
at oracle.j2ee.ws.common.encoding.literal.LiteralFragmentSerializer.<ini
t>(LiteralFragmentSerializer.java:62)
at oracle.j2ee.ws.common.encoding.literal.LiteralAnyElementSerializer.<i
nit>(LiteralAnyElementSerializer.java:16)
at oracle.j2ee.ws.common.encoding.literal.StandardLiteralTypeMappings.<i
nit>(StandardLiteralTypeMappings.java:198)
at oracle.j2ee.ws.client.BasicService.createLiteralMappings(BasicService
.java:280)
... 14 more
Caused by: javax.xml.soap.SOAPException: Unable to create SOAP Factory: Provider
com.sun.xml.messaging.saaj.soap.ver1_1.SOAPFactory1_1Impl not found
at javax.xml.soap.SOAPFactory.newInstance(SOAPFactory.java:33)
at oracle.j2ee.ws.common.encoding.literal.LiteralFragmentSerializer.<ini
t>(LiteralFragmentSerializer.java:93)
... 18 more
CAUSE:
javax.xml.rpc.JAXRPCException: javax.xml.soap.SOAPException: Unable to create SO
AP Factory: Provider com.sun.xml.messaging.saaj.soap.ver1_1.SOAPFactory1_1Impl n
ot found
at oracle.j2ee.ws.client.BasicService.createLiteralMappings(BasicService
.java:282)
at oracle.j2ee.ws.client.BasicService.createStandardTypeMappingRegistry(
BasicService.java:244)
at has.proxy.runtime.JoPayWebServiceService_SerializerRegistry.getRegist
ry(JoPayWebServiceService_SerializerRegistry.java:26)
at has.proxy.runtime.JoPayWebServiceService_Impl.<init>(JoPayWebServiceS
ervice_Impl.java:26)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct
orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC
onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at java.lang.Class.newInstance0(Class.java:350)
at java.lang.Class.newInstance(Class.java:303)
at oracle.j2ee.ws.client.ServiceFactoryImpl.createService(ServiceFactory
Impl.java:92)
at oracle.j2ee.ws.client.ServiceFactoryImpl.loadService(ServiceFactoryIm
pl.java:121)
at has.proxy.JoPayWebServiceClient.<init>(JoPayWebServiceClient.java:18)
at moict.Main.confirmPayment(Main.java:142)
at moict.Main.main(Main.java:93)
Caused by: javax.xml.rpc.JAXRPCException: javax.xml.soap.SOAPException: Unable t
o create SOAP Factory: Provider com.sun.xml.messaging.saaj.soap.ver1_1.SOAPFacto
ry1_1Impl not found
at oracle.j2ee.ws.common.encoding.literal.LiteralFragmentSerializer.<ini
t>(LiteralFragmentSerializer.java:95)
at oracle.j2ee.ws.common.encoding.literal.LiteralFragmentSerializer.<ini
t>(LiteralFragmentSerializer.java:62)
at oracle.j2ee.ws.common.encoding.literal.LiteralAnyElementSerializer.<i
nit>(LiteralAnyElementSerializer.java:16)
at oracle.j2ee.ws.common.encoding.literal.StandardLiteralTypeMappings.<i
nit>(StandardLiteralTypeMappings.java:198)
at oracle.j2ee.ws.client.BasicService.createLiteralMappings(BasicService
.java:280)
... 14 more
Caused by: javax.xml.soap.SOAPException: Unable to create SOAP Factory: Provider
com.sun.xml.messaging.saaj.soap.ver1_1.SOAPFactory1_1Impl not found
C:\> -
Need help with buttons in applet
stupid question maybe but i'm a beginner, and hey..there are no stupid questions, right? well, i may prove that wrong...anyway...
I can't relocate a button, or any other component for that matter. When I try to make a simple applet with just one button showing, then it works perfect...but when I make the applet a little bigger with some graphcis and text, the setLocation() and setSize() methods don't work. the wierd part is that I don't get an error message, the compiler just ignores those lines...so it seems anyway.
If anyone can help me I'd be very greatful
thanx a lotDo you know there are 5 layout managers in java. It is probably worth looking through each one and the commands they use.
The layout is determined by two things:
1.position Components are added
2.Layout manager used
Ive never had to use setLocation() and setSize() as the layouts do it for you:
1.Flowlayout: which is the default pane. e.g.
setLayout(new Flowlayout()).
2.GridLayout: postions panels into rows and columns
b.GridBagLayout
3.Borderlayout(NORTH,SOUTH,EAST,WEST and CENTER) postions in applet.
4.CardLayout(a bit like a slideshow)
5.Insets() which is used to determine top,bottom,left and right.
Don't bother about 4 or 5 yet. But definitly have a look at the other 3.
e.g. setLayout(new BorderLayout());
add("North", new Button("ok"));
add("CENTER", new Button("Exit");
etc.. -
Need help with buttons in a phone simulation
Hello
I have built a telephone interface to be used for training in a Call Center.
I am attempting to allow the user to press on the numberpad to enter passwords and such.
It is only a simulation and will only work if the user presses the correct buttons.
I am able to create the simulation when the user presses different buttons such as 1234
but I need them to press 0000 (zero 4 times)
I am not sure how to do this...
I have been playing around with the advanced actions, which has allowed me to accomplish the hide and show actions when the user clicks a button, but wondering if there is a way I can
have them click the 0 on the dialpad so each time it brings up the next zero
once its gets to the 4th one, it will advance to the next slide...
Hope that makes sense
I appreciate any help or advice
thanks
MelissaHi there,
What I did, I took a variable 'counter123' and assign '0' value to this variable.
I then added a button with Advanced action, I am sharing the Screenshot of the advanced action panel.
Screen shot 1 :
Incrementing the Value on click :
The value of the variable should increase on every click, so lets add a true statement as a condition.
Screenshot no 2 :
As normally on buttons/click boxes, the project will continue as soon we click them.
lets compare the value of our variable and then pause the project.
Screen shot 3 :
last if our purpose is solved, here we have clicked the button 4 times, so that has updated the value of our counter to 4, so as soon as the counter exceeds the value, we want the project to continue.
please let me know if this helps you.
This will help you in pressing a button 4 times, and i think you can also add actions to show and hide 'zeros' in your project.
I find such scenarios very interesting and I always find help on Lilybiri's Blog : http://lilybiri.posterous.com/
Thanks -
NEED HELP WITH BUTTONS IN AS3!!
Hello, I am stumped with an action scripting problem. I'm
trying to create a really basic website in flash using buttons to
jump from scene to scene. Let's say I want to do something as
simple as make scene 1 jump to scene two right? I'll place in my
scene 2 button on my first page:
But instead of the scene changing to the next scene after I
press the button, these errors come up!!
1180: Call to a possibly undefined method on.
1120: Access of undefined property release.
1120: Access of undefined property _root.
I've tried asking in so many different forums, I usually do
pretty good with action scripting for buttons. But this is my first
time doing it with cs3. I'm utterly confused, someone please help!!
Thank you.
The code on this page is the code I was using to try to
change scenes...Oh! and whenever I try to put a code in the actual
button, it won't let me. I just get a message that says something
like "Can't have any actions applied to it".foxxpop,
> But instead of the scene changing to the next scene
> after I press the button, these errors come up!!
>
> 1180: Call to a possibly undefined method on.
> 1120: Access of undefined property release.
> 1120: Access of undefined property _root.
You're using three terms that aren't supported in
ActionScript 3.0: the
on() function, the release parameter to that function, and
_root. In
ActionScript 3.0, you'll have to give your button an instance
name and wire
it up like this:
http://www.quip.net/blog/2007/flash/making-buttons-work-in-flash-cs3
In that blog entry, you'll see (with explanation) something
that looks
like this:
myButton.addEventListener(
MouseEvent.CLICK,
function(evt:MouseEvent):void {
trace("I've been clicked!");
Just bear in mind that you can also make that a named
function, like
this:
myButton.addEventListener(MouseEvent.CLICK, clickHandler);
function clickHandler(evt:MouseEvent):void {
trace("I've been clicked!");
> I've tried asking in so many different forums, I usually
do
> pretty good with action scripting for buttons. But this
is
> my first time doing it with cs3.
Your issue isn't Flash CS3, it's that your FLA file is
configured for
ActionScript 3.0. If you change that to AS2, you can go right
on using the
same approach you used to -- and you'll be able to attach
code directly to
objects. ;)
David Stiller
Co-author, The ActionScript 3.0 Quick Reference Guide
http://tinyurl.com/2s28a5
"Luck is the residue of good design." -
Hi Folks,
I'm stuck with a simple flash movie I need to create in which two images fade in and fade out, and each of them must be clickable and hyperlink to a separate URL.
I've got the fading going okay, but I cannot for the life of me get even a single button to work on it.
If it's helpful I can send along what I've got so far. Any assistance would be greatly appreciated.
Regards,
Andrew.Hi Ned,
Thank you for the followup email.
I think I was close - I was aware of the changes between AS2 and AS3, but I
think I was putting the Action in the wrong place.
Next question - if I have 2 buttons (say btn1 and btn2), how do I make btn1
available for say frames 1-60, and btn2 available from frames 61-120?
I am primarily a ColdFusion developer, and a complete newbie to flash, so
sorry if this is a dumb question.
Regards,
Andrew.
2009/5/15 Ned Murphy <[email protected]>
In AS3, to make a button work with code, you need to add an event listener
for it. In the timeline that holds that button, in a separate actions layer
that you create, in a frame numbered the same as where that button exists,
you would add the event listener:
>
btn1.addEventListener(MouseEvent.CLICK, btn1Click);
>
Descriptively, that line of code contains the following:
>
buttonInstanceName . displayObjectMethod (eventClass . eventType,
eventHandlerFunction);
>
The name of the function for processing the clicking of that button was
already defined at the end of the event listener assignment, so now you just
have to write that function out:
>
function btn1Click(evt:MouseEvent):void {
var /String = "http://www.awebsite.com/awebpage.html";
var req:URLRequest = new URLRequest(url);
navigateToURL(req);
> -
Help with Buttons in Actionscript 2
Help!! I am creating a Flash movie with 5 scenes. I have
buttons for each that I have added actionscript to, but they still
do not work. I am not getting any error messages. I am using
actionscript 2 and have gone step by step. here is what i have :
on (release) {
gotoAndStop("main", 1);
on (release) {
gotoAndStop("blackboard", 1);
etc for the rest of the buttons. Any help would save me much
stress as I am trying to finish a project for school!!! thanks
ahTry adding _root. before the gotoAndStop command. If you have
the code on the buttons that is.
Maybe you are looking for
-
Advance level drawing problem with Jframe and JPanel need optimize sol?
Dear Experts, I m trying to create a GUI for puzzle game following some kind of "game GUI template", but i have problems in that,so i tried to implement that in various ways after looking on internet and discussions about drawing gui in swing, but i
-
Hi, I've got an a64400 + discrete graphic, i have got some glitches with my setup and i didn't find a way to stop this. A video of the glitches: http://youtu.be/ykNpmVOvNv0 Things maybe related: i've got a 0 size iommu aperture (cfr dmesg), dunno how
-
I just received a new Apple wireless keyboard (2 batteries) and it was working fine and then it just stopped when I tried to use it this morning. I powered it off before i went to bed. No more little green light coming on when you press the power but
-
I just bought my mac book pro and updated to mountain lion and I don't know why it is taking around 1minutes and 10sec to boot up,does anybody have any idea? and also how can I make my laptop boot up faster?thank you in advance
-
Performance Appraisal-Move the document from Part Appraiser to Appraiser
Hello After the 2nd level manager (part appraiser) has rejected the document, it should be sent back to the 1st level manager review the notes and make changes before resending it back to the 2nd level manager. When the second level manager receives