Help with buying the right MacBookPRO.

I have an old 2006 Ca vintage powerbook. It works after a few repairs but I cannot update. So I will have to now buy a new one.
I have many questions, but the main one is about solid state hard drive.
Two questions:
1/ Limited write cycle? What does that mean in terms of solid state? After some time does one have to change the solid state drive, even though it still partially works? 
2/ Solid states don't get affected by magnets, but what about these new stronger X-rays machines in airports,   .. . or even Light? I fly every two months and those new X-ray machines are very strong.
I am a creative type with low income, so I want the macbook pro to last more than 3 years. I have a large archive in London and many scans etc, so I also cannot afford to lose any info either. --Having already lost thousands of Emails more than once in Apple's mail!
The bigger the storage the better, too!
I was told that the new retina screen is more fragile, and also as great as it looks, doesn't print with the same colors. I dabble in graphics but don't print that much, plus I work on photos and video, and I wheel my laptop in a Tumi case at the airports.
Which MacBookPro would you suggest?
I would really appreciate some advice on which of the new ones to get. Solid state without retina or with retina screen? No Solid State and an inbuilt drive? I often have slow broad band, so I still like to store the many files on hard drives and in the laptop.
Prima

Go with the non-Retina 15 Inch.....The Retina Macbook Pro is quite expensive and there is no update available at the moment from Adobe and Microsoft to support the Retina Screen.
With the Retina Macbook - you can not upgrade your RAM in the future should you need more - since it's soldered in the logicboard - the flash storage is upgradeable but not worth it's price right now.
With the non-Retina Macbook Pro - you can upgrade the RAM yourself and if you think you're running out of storage space - the hard drive is also easily upgradeable.
if i were in your shoes - i would get the base 15 Inch Macbook Pro - add the antiglare Hi-Res screen if you need it and do the RAM upgrade to 16GB - That's what I did to my 15 inch Macbook Pro.
with regards to your SSD question/concerns:
SSD Endurance
3K P/E Cycles
5K P/E Cycles
10K P/E Cycles
30K P/E Cycles
NAND Capacity
100GB
100GB
100GB
100GB
Writes per day
10GB
10GB
10GB
10GB
Write Amplification
10x
10x
10x
10x
P/E Cycles per Day
1
1
1
1
Total Estimated Lifespan
8.219 years
13.698 years
27.397 years
82.191 years

Similar Messages

  • Help with choosing the right specifications for a Macbook Pro Retina?

    Opinions needed....
    So I'm new to Macs, but I know what I want to achieve and I feel this is the right route to choose. I'm looking at delving into the world of music production, using Logic pro 9 and garageband, but I also enjoy watching High definition Movies and televison so I know that the Retina display is definatley the right choice for me. However, I'm unsure on the amount of RAM & Which processer I should choose. I have read a fair bit on forums and online about the new retina macbooks being 'locked' from upgrading, so the 16GB of RAM is an immediate choice for logetivity.
    The choice of processor is when I start to become clouded in my choice. As forementioned, I'm looking at running logic pro, as well as high def movies. There is also a possibilty at looking into photo and video editing, Whether that be in final cut pro or photoshop... But I want to leave my options open.
    I think the choice of 16GB of RAM, 2.6Ghz processor, with a 256GB hard drive ( as i have 1.5TB external space) would be a good choice. Once I've added on applecare that comes out at around £2350, Which is a significant investment, but one that I think will help me immensely for the future. I am interested in other peoples opinions on my possible choice because, as I said before, I'm new to the world of Macs and making the right choice is essential. As a side note, the choice of upgrades also ensures a reasonable resale value, which is a bonus.
    Regards

    Both power adapter I have are different (at the magnet end) from the one in link.
    Earlier adapters have T shaped connectors, which Apple later changed to the L shape, presumably to make them more abuse-proof. Either one is fine and the one you are using will not damage your Mac.
    Retina MBPs and new MBAs use a completely different MagSafe 2 connector which will not fit (without an adapter).

  • Help with choosing the right hardware

    Hello,
    I would like to know what hardware sollutions from NI are best suited for my Master's degree project, which is a motorized crane for a video camera (basically a robotic arm with 5 axes). What I need is something to control my 5 motors (DC/stepper) - both in position and velocity and also need some Digital inputs available for different sensors. In my previous project, I have succesfully built a motorized slider for camera (only 3 axes - 2 rcservo for pan/tilt and a DC motor for translation which was controlled in position) and I used Arduino development board to control it, encountering difficulties for controlling my entire system. In this upgraded version of the crane, I thought that NI hardware are more reliable, and I want to find something to match my application requirements. I just need something to control my motors using Labview, as I will make my own drivers for them (also something affordable for a student as the motion control modules are way out my bugdet).
    On the other hand, I would also like to control my system from a smartphone and I was wondering why Labview has implemented applications for Android and Apple, but not Windows Phone? Are there policy issues or just not yet implemented? If not, I would gladly develop an application for WindowsPhone8, as it would help me remotly control my crane.
    Thank you in advance,
    Catalin Ionita
    "Politehnica" University of Bucharest

    Hello Catalin,
    There are a few options that are available for this application, I'll start with the simplest hardware with the most difficult software and then progress from there.
    The simplest implementation that I can think of would be a high channel count digital I/O device, where you power a custom H-Bridge or similar motor driving circuit. Based on a 6 or 4 pole stepper motor this would translate to 20-30 digital channels. Something as small as a NI USB-6504 (24-ch, 8.5mA) would work with very low performance. This implementation would only have software timed digital output with a significant amount of jitter and variability, as well as the 8.5mA max current drive per channel which would require extremely high input impedance on the drive circuit. 
    The next step up in implementation would be a digital I/O device with Hardware timing such as a NI PCIe-6321 or a NI PCIe-6323. These cards will allow a buffered digital output which will significantly reduce jitter and increase the performance of this control.
    Both of the above methods would require you to program the motion control for the stepper motors, and would also require an external drive for providing the power to the stepper. This could be something as simple as a custom built H-Bridge, a simple stepper motor driver such as this one available from sparkfun.com: Big Easy Driver.
    The next option would be using the motion modules such as a NI 9501 or a system built by following the NI Stepper Motion System Selection Guide. This would be the most complicated hardware, however this would enable you to use the National Instruments SoftMotion Module for programming instead of writing all the code from scratch.
    In regards to the implementation for LabVIEW implementation for Windows Phone, I am unsure of whether this will or will not be implemented. Please feel free to post your ideas on implementation on the NI Idea Exchange, and thanks for the feedback!
    Cheers,
    Joel
    Motion PSE
    National Instruments

  • Help with choosing the right lenovo laptop model

    Hello All,
    I  am in the process of  replacing my old   Lenovo  w520 with one of these laptop models  :-
    i) Lenovo  T440
    ii) Lenovo X1 Carbon
    iii) Lenovo W540
    Which one of  the  above  3  models  is  the best ?  What are the known problems with any of these models?
    My primary requirement is to have higher data storage capacity , Good  processing power and a  good sound card.
    Let me know  which of the models is the best .
    Regards,
    Vir

    Go20 wrote:
    Thank you for your advise but how can I get very good quality on DVD then.
    as long as your project is <60min, iDVD will create best quality technically possible (=using the highest bit-rate, 9MBit/s) standards allow .
    it is not a prob of the tool, but the standards. your source is 1920x1080, a DVD can contain only 720x480 ..
    if you want 'higher' delivery-quality, consider BluRay (hmmm?) or a MediaPlayer (AppleTV, WD TV, PS3, .. )

  • Please help with choosing the right text component

    Hello,
    In my applet, I need a single-line text component with the following capabilities:
    1: Support for bold font (entire text,not just part of it)
    2: Support for underlined text (entire text,not just part of it)
    3: Support for blinking text
    4: Ability to put caret anywhere within the text field with mouse
    5: Support for field validation
    6: Ability to handle various key events and modify the text and/or move around caret position accordingly.
    Now, I know there are at least 4 different text components: JTextField, JTextArea, JEditorPane, JTextPane. Which one of these is most suitable for the above features? Is it possible to use JTextField to support all of the above?

    Here is a link to the Java Swing tutorial which discusses the text components.
    http://java.sun.com/docs/books/tutorial/uiswing/components/text.html
    I think you need to use a JEditorPane or a JTextPane (although I'm not sure any of the components support blinking text). A demo program shows some of the capabilities of these components:
    http://java.sun.com/docs/books/tutorial/uiswing/components/generaltext.html

  • Living in Uruguay-Help with buying CC subscription

    Hello fellows, pls, I need some help to buy the CC subscription, which I can't due to the fact I live in Uruguay! How to???????? No chat available, telephone call is endless, and Adobe is awful with "contact help"-.... You are my last resource to solve this issue. I thank in Advance any idea you can have.
    Best wishes for the season--
    E&I Kennel.

    Adobe Resellers http://adobedealreg.force.com/PartnerSearch?lang=en
    -http://www.adobe.com/content/dam/Adobe/en/products/creativecloud/cc/pdfs/cc-availability-m atrix.pdf

  • I need your help with buying one of your software programs.

    I need your help with buying one of your software programs.
    First of all I do not want to join this “Creative Cloud” for a monthly plan.
    Adobe Illustrator CS6 is what I am wanting but every time I click on the buy button is keeps sending me to a rent page to use but I don’t want this I want to buy it program for my own use. I don’t want to rent it I want to buy it like all the other Adobe software programs that I have bought from you in the past.
    Can you help with problem?
    Tim Adams
    [email protected]

    You can buy CS6 from this page
    Creative Suite 6

  • HT1711 Is buying the song on iTunes buying the rights to use the song in a video

    Is buying a song on iTunes buying the rights to use it in a video

    No, absolutely not. You are buying only the rights for personal use only. If you want to use a track in a video, you need to 1) get the track from a CD since the iTunes Store disallows any sort of commercial use and 2) obtain a license from the content owner to use the track in a video. There are usually clearing houses for that purpose that handle licensing for the major record labels.
    Regards.

  • Question: Need help with overcoming the following message:  "Nothing was imported.

    Need help with overcoming the following message:  “Nothing was imported.  The file(s) or folder(s) selection to import did not contain any supported file types, or the files are already in this catalogue”.
    The photos being scanned are old film shots.  They have NOT been previously scanned.  I am using Photoshop Elements 9 software.
    QUESTION:  how do I override this STOP and or circumvent the photo comparison option????
    Thanks for the help. Bob K ---  [email protected]

      Are you scanning as jpeg, tiff or some other format?
    Are you using continuous numbering for files names as by definition scanned files have no exif data.
     

  • Hello  I need your help with installing the flash drive into my laptop

    Hi
    I am Rachel Friedman asking for your help with installing the flashdrive player into my laptop.
    Thanks
    Rachel

    To give you any useful advice, I'm going to need to know more about your computer and browser:
    https://forums.adobe.com/message/5249945#5249945

  • I bought 2 of the same songs by mistake and they were the short version i was listening to in order to make sure that i was buying the correct record. how do i get a refund in order to buy the right song?

    I bought 2 of the same song by mistake and they were the short version i was listening to in order to make sure that I was buying the correct record. How do I get a refund in order to buy the right song?--

    All purchases are considered final, but you can try contacting iTunes support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Help with updates - The software change returned error code 0x87D00215(-2016411115).

    I have rolled out bunch of updates across few hundred workstation systems.
    Few of the desktops have failed to install SOME of the updates and just can't get my head around as to why?
    Looking at one of the workstations, I can see 5 updates are pending download at 0%.
    Some of these fail after a while and with in Software Centre, I can see 'Help with updates - The software change returned error code 0x87D00215(-2016411115).'. Not exactly sure what this means, but I have tried clearing the cache and
    rebooting the workstations few times.
    (I have also tried to use Windows Update and install one of these manually, which worked.)

    Investigating this further, I have found the following in CAS.log:
    ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Successfully created download request {ED6E9E5C-E806-43CA-9F93-49AC72D1DEAD} for content 53bf87a2-bedf-4def-b0ec-9637613c3429.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Requesting locations synchronously for content 99ddb078-b780-4605-8fac-9607fe56450d.1 with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    The number of discovered DPs(including Branch DP and Multicast) is 1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Calling back with the following distribution points ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Distribution Point='http://DPSERVER.com/SMS_DP_SMSPKG$/99ddb078-b780-4605-8fac-9607fe56450d', Locality='LOCAL' ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Requesting content 99ddb078-b780-4605-8fac-9607fe56450d.1, size(KB) 0, under context System with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Successfully created download request {67B7E59B-A386-4EA8-BF39-2EB64B108A6C} for content 99ddb078-b780-4605-8fac-9607fe56450d.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Requesting locations synchronously for content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1 with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    The number of discovered DPs(including Branch DP and Multicast) is 1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Calling back with the following distribution points ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Distribution Point='http://DPSERVER.com/SMS_DP_SMSPKG$/61d33de7-9582-41e3-82fc-3e0f970b60f3', Locality='LOCAL' ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Requesting content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1, size(KB) 0, under context System with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Successfully created download request {12E48136-B545-4C42-9745-9FF97CE38D52} for content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)

  • Please HELP me with getting the right version of Adventure Works database

    Hi,
    I have SQL SERVER 2008 R2 installed with me. And i have downloaded 'AdventureWorks2008R2_Database' from msdn links only.
    It is running fine. 
    Now the practise material i have with me is where employee table have columns precisely as in this link here 'http://technet.microsoft.com/en-us/library/ms124432(v=sql.100).aspx'. And the version which i downloaded and using doesnot have these.
    So need help with actual version which would have all these columns. 
    Thanks

    Hello,
    That's link is to the documentation of Version 2008, in Version
    2008 R2 the design has changed a little bit. Download the example for version 2008 is you Need exact that table design.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Would love help some tech issues with buying the iphone/upgrading my plan because I had a TERRIBLE RUDE chat with Jenna

    I don't know how to contact you by email, but I just want you to know I had a terrible live chat with someone named Jenna, just not at 5:26pm PT. There was no survey at the end to rate and give my feedback, so I am doing so here. I wanted to spare your dignity and not take it out on the company by posting publicly on your own page, so I am doing so in this message because I still respect your service overall. I feel that you just have to know Jenna was cold, lacked any interest in my issue, and even sarcastic at times which I found extremely unprofessional. I've never been treated by any rep at Verizon this way before. I just had concerns about buying the iphone 6 and she in no way eased those concerns or gave proper explaining, so perhaps she needs more training. Not a good way to sell your company or product, that's for sure. If I wasn't on here through a company contract, I would easily have switched to another service. if you have further questions, feel free to reach me/message me back.

    Speaking of being rude and needing a "workshop that you can attend on empathy, positive energy and how to be more kind to human beings", your message certainly speaks for itself. Out of our collective posts, YOURS are the only ones which resort to insults and name calling. I take it you WILL NOT be leading that workshop.
    As to your statement "i got the message the first time", my two posts are about 2 unrelated items in your OP. It is NOT me posting the same information twice. The first was about the availability of your receipt and the 2nd was about your claim you thought you were replying in private to Verizon and you should read a bit more closely next time if the email you got led you to believe that. Seeing your reply to me, I can certainly understand your need to do so. I'm sorry if you think me trying to keep your personal information private and not being spread needlessly across the web seems rude.
    Hopefully you got your receipt with the information you needed.

  • Please help; is iPhoto the right organization solution across devices?

    This question covers more than just iPhoto, so I truly hope I am in the right spot. I'm asking in this forum, because it will help me make the decision as whether or not to buy iPhoto.
    Here's is my situation.
    I have an
    iPhone 4
    New iPad
    Mac mini
    camera.
    The Mac Mini, for photo purposes, is used as storage. I simply dump photos from the iPhone or iPad when needed. All devices are updated through the Mac Mini.
    I take photos mainly with my camera and iPhone. iPhone photos connect to the iPad through photo stream. Camera photos through the camera connection kit.
    I do all of my editing on my iPad with Snapspeed. The iPad is my daily "computer".
    I now have several questions/issues I'm trying to overcome.
    I am wondering if I download iPhoto will that enable me to do the following:
    1) Move camera roll and photo stream photos from the iPad into IPhoto on the iPad permanently?
    2) After said photos are in iPhoto, may I delete the "originals" from the iPad or iPhones camera roll or photo stream without loosing them in iPhoto? My goal here is to keep my camera rolls with as few photos as possible.
    3) Is it possible if I download iPhoto to the iPad to wirelessly sync all of these albums onto the Mac Mini, since it is esentially my permanent storage spot?
    4) I already have iPhoto installed on the Mac Mini, but its honestly a cluster! If the above is possible will the organization I employ on iPad (albums, etc) carry over to the Mac Mini; or will I be reorganizing constantly?
    5) Will it be possible to edit in Snapspeed then move that edit into IPhoto? Is there a way of doing this other than editing it in Snapspeed, saving to camera roll, moving camera roll photo to iPhoto?
    6) On the other hand, will it be possible to take a photo from iPhoto and push it "back out" to the camera roll, photo stream, Snapspeed, etc?
    As you can see, my reasoning for these questions is my brain seems to work in this very quirky way when it comes to all these IOS devices. I have a hard time scrolling through hundreds of photos on the camera roll. The photo stream often confuses me as to what is in there and which device it came from. I can never tell if I have to save it, delete it or when it will disappear.
    If I used my Mac Mini daily, I would simply organize each session of photos into different albums. Editing each as I wish.
    I am trying to accomplish this using my iPad as my "main computer", with the additional hope that with all of this fancy, cloud, photo stream stuff that I can turn on any of my 3 Mac devices and see, edit, use the same things with minimal use of wiring devices together.
    I sincerely appreciate anyone who has suggestions or can help me. I am a first time user to this, but have often used the information here to solve other issues I've had. Apologies again if this is posted in the incorrect space. I am thankful for the helpfulness of this community!

    You might be able to make your time dropdown more condense by putting all your availabe time in one dropdown
    For example :https://adobeformscentral.com/?f=932b00UZyOXpKY6yIrBX2w
    FormsCentral doesn't support table in the fillable form. Like you discovered you would need to create the form outside of FormsCentral as a PDF and then import it into FormsCentral if you want that type of form design.
    What you can do in FormsCentral though is use show and hide logic to add rows in your form
    For example : https://adobeformscentral.com/?f=4XaXHYfSMaumC9mGH6EHAg
    Hope this helps
    Gen

Maybe you are looking for

  • Unable to Validate this serial number

    Okay, so after the problems with trackpads on Yosemite, I decided to upgrade my Photoshop Elements... purchased, I have a valid order number (AD002567702UK), and a serial number, but get a validation errors. I have wasted two hours trying to get this

  • Rg: down payments made

    Hi, User posted a down payment using transaction f-48 for an amount of 500000 to a vendor AAAA. and received an invoice of 400000 for that vendor AAAA. 400000 is nullified using f-44 for the existing amount of down payment 500000. now the user says t

  • Trying to install ilife 04

    everytime I try it keeps saying cannot install because iphoto, idvd, imovie, garage band, or itunes is running. Please quit applications...but the funny thing, THERE'S NOTHING RUNNING!!!!! HELP ME BEFORE I THROW THIS MACHINE OUT THE WINDOW!!!! Thanks

  • Standard USB Host Controller

    Hi, The USB connection used for connecting to a printer failed. Trying to fix it I removed the Standard USB Host Controller Port_#0001.Hub_#0009 and as a result the device is now marked as "unknown device" with status= error#43. How can I fix it? Tha

  • Muse: error 1009: site doesn't open at all

    Hi, I've been working on a portfolio website with the muse beta version, but since yesterday I have been getting an error when I try to open it, I doesn't open at all any more. It gives the following error: Adobe Muse encountered an unexpected error