Help with case suggestion
I need the searching power of the Apple Community, for my efforts have produced few results!
I was a blackberry user (the 8310 Curve) and I really liked the case I had. Leather case, magnetic strap, swivel clip and I was able to pull the phone out whenever I needed to.
I am trying to find something similar if not exactly like this for the iphone. Slim is nice, but I really want that swivel clip so that I can angle the case and pull out the phone whenever i need too. (I see some cases have a strap overtop)
Any suggestions are greatly appreciated.
It depends on your budget. I plumped for one of these http://www.vajacases.com/ as i've had them in the past and the quality is top notch. However, I couldn't decide between two different ones so I also went with one of these as well and i'll chop & change as & when I feel like a change. I couldn't resist as they look so cool http://www.miniot.com/miniot/index.htm
I also like the blackberry cases, however, i've found that the belt clip doesn't last all that long. One has broken on me and the second one is on it's way out now. The first option from vaja sounds more like what you are looking for though. Hope this helps.
Similar Messages
-
Hi Experts,
I am working with Case Management, and I have to create Cases with all its specifications automatically. Anybody knows how I can create it? or Anybody have any suggestion or documentation to start with this.
Thanks in advance.
Regards,
Beatriz.Hi,
Easy transaction to Case Management customizing is SCASE_CUSTOMIZING. There you have an overview of the customizing of case management.
Also carryon these steps one by one...
Case Management Basic Settings :
Define Number Range Intervals for Case
Define Case Types
Determine Permitted values for attribute
Create values for "Category" attribute
Create values for "Cause" attributes
Create values for "Priority" attribute
Create values for "Reason" for escalation attribute
Assign escalation reasons to an attribute profile
Create values for "Authorization level" attribute
System Modifications
Create status profile
Create Text profile
Create Text Ids
Create Text Profile
Define Logical system for external objects
Enhanced System modifications
Note About Enhanced System Modifications
Define Processes
Set up registry
Create/Change Case Record Model
Create Profiles
Create attribute profile
Create function profile
Create terminology profile
Create Activities for authorization check
Activate application log
Define processes
Create/Change Case Record Model
When u open the Transaction SCASE_CUSTOMIZING , there will be Registry Steps...
Follow them step by step.
For any queries reply.
Regards,
Eswari. -
Hi All,
I have 2 tables like below. now i have a requirement which i need to do it in CASE OR DECODE. because i have to implement this logic IN SELECT STATEMENT for a column.
In table T1 if Lang = 1 and State = 'P' then display Lang = 'english' in table T2(which is Lang=2 in table T1) Or else display null.
Can we do this logic using CASE or DECODE? pls help
T1
Lang State
1 P
2 N
T2
Lang Dscr
1 central
2 englishSomething like this ?
SQL> ed
Wrote file afiedt.buf
1 WITH t1 AS (SELECT 1 lang, 'P' STATE FROM DUAL UNION ALL
2 SELECT 2 lang, 'N' STATE FROM DUAL
3 )
4 , t2 AS (SELECT 1 lang, 'central' dscr FROM DUAL UNION ALL
5 SELECT 2 lang, 'english' dscr FROM DUAL
6 )
7 SELECT t1.lang,t1.state,CASE
8 WHEN t1.lang=1 AND t1.state='P'
9 THEN (SELECT t2.lang FROM t2 WHERE dscr='english')
10 ELSE NULL
11 END "lang"
12* FROM t1
SQL> /
LANG S lang
1 P 2
2 N -
Hardware or software to help with tremor-- suggestions needed
Hello, my dad is trying to use an intel imac, and he's having a lot of trouble, partly due to a tremor that makes it difficult to manipulate the mouse and keyboard. Does anyone know of any solutions to such a problem? I would think there might be a mouse or trackball and a keyboard that are designed to help, or perhaps a software solution for a shaky mouse, but I thought I'd throw the question out there to see what can be found.
Like it or not, many of us will be facing this problem eventually, and I'm learning that the mac requires more dexterity than the average 85-year-old has.There occurred to me that I should have mentioned that I am assuming that you are using the trackpad and keyboard of the Mac Book which I can understand your Dad really disliking. My suggestion is that you blow a few bucks and get the extra keyboard and trackball as a present for your dad and plug it into the Mac Book USB port. You might also find it handy to hook up a monitor (20" or so). It will be so much easier to read the larger screen. You might also be aware that with mouse, keyboard and display hooked up you can close the lid on the Mac Book and the display will look a bit better not having to share the video processor with the Mac Book display.
The other thing I would mention is that it might be wise to download one of the programs that make an audible click through the speaker with each keyclick, mouse click and scroll wheel turn. I use a little Preference Pane called "Keyclick" which gives you many options on how you want it to sound (I make my keyboard sound like an old fashioned typewriter - which is a sound your Dad would be quite familiar with!) With this installed, your Dad will have much more feedback and it will make typing and mousing much easier for him.
Griff -
hey All. I could use a hand here. I am not too good with
Javascript..just enough to get by.
I am trying to implement the SUGGEST feature of CFAJAX. I
used the example found here:
http://jr-holmes.coldfusionjournal.com/cfajax_suggest.htm
Basically I am trying to load a list of street names.
However, when I load the page, I get the following error in the
firefox js console:
Error: missing formal parameter
Source File:
http://sideshow/cfajax/search.cfm
Line: 32, Column: 23
Source Code:
function getDataResult(return){
I have attached my code that includes the getDataResult
function(where it appears to be erroring). If anyone can help me
out, I would really appreciate it.
Thanks
JaosnSo what isn't working, specifically? What are you getting back at the client end? Also, you might want to post the <cfform> code block so we can see if anything is wrong with the bind(s).
Lastly, you should consider not using <cfform> and <cfinput>, for a number of practical reasons. Here are some ideas for suitable alternatives: https://github.com/cfjedimaster/ColdFusion-UI-the-Right-Way.
-Carl V.
Message was edited by: Carl Von Stetten -
Still need help with case sensitive strings
Hello guy! Sorry to trouble you with the same problem again,
but i still need help!
"I am trying to create a scrypt that will compare a String
with an editable text that the user should type to match that
String. I was able to do that, but the problem is that is not case
sensitive, even with the adobe help telling me that strings are
case sensitive. Do you guys know how to make that comparison match
only if all the field has the right upper and lower case letters?
on exitframe
if field "t:texto1" = "Residencial Serra Verde"then
go to next
end if
end
|----> thats the one Im using!"
There were 2 replys but both of them didnt work, and the
second one even made the director crash, corrupting even previously
files that had nothing to do with the initial problem..
first solution given --
If you put each item that you are comparing into a list, it
magically
makes it case sensitive. Just put list brackets around each
item.
on exitframe
if [field "t:texto1"] = ["Residencial Serra Verde"] then
go to next
end if
end
Second solution given--
The = operator is not case-sensitive when used on strings,
but the < and > operators are case-sensitive.
So another way to do this is to check if the string is
neither greater than nor less than the target string:
vExpected = "Residencial Serra Verde"
vInput = field "t:texto 1"
if vExpected < vInput then
-- ignore
else if vExpected > vInput then
-- ignore
else
-- vExpected is a case-sensitive match for vInput
go next
end if
So any new solutions??
Thanks in advance!!
joao rsmThe first solution does in fact work and is probably the most
efficient way
of doing it. You can verify that it works by starting with a
new director
movie and adding a field named "t:texto1" into the cast with
the text
"Residencial Serra Verde" in the field. Next type the
following command in
the message window and press Enter
put [field "t:texto1"] = ["Residencial Serra Verde"]
You will see it return 1 which means True. Next, make the R
in the field
lower case and execute the command in the message window, it
will return 0
(true).
Now that you know this works, you need to dig deeper in your
code to find
what the problem is. Any more info you can supply? -
Need help with case cracking - Defect?
I have a macbook (white) a1181 that I purchased in 2008...
I handle my computers very delicatly and if they travel with me, they are packed very well with support...
The body (case) of the laptop back by the fan underneath has a long hairline crack.
There is also one where the front lip is as well.
NOW,
Apple Genius Bar wants ME to pay outright to get it fixed.
It was not my fault at all!!!!! And it was not accidental damage either.
SO I called Apple who wouldn't help me because I don't have phone support Or apple care. So if I pay the $50 for phone support, they'll tell me the same thing they told me in the store the operator told me.
FIRST OFF, I didn't know that my Apple Care expired and even if I had it, it wouldn't really help me I was told...
I paid so much money for this laptop and scrimped and saved up and I feel like I'm being dragged through the mud.
I need to contact someone higher-up ASAP - this is absolutely ridiculous.
I did not do anything to cause this cracking..
I am so upset as I really saved up for years for this computer only for 3-4 years later for it to be cracking worse and worse. I paid so much...
Any advice or help would be greatly appreciated.
Thanks,
ajajsonnick wrote:
I need to contact someone higher-up ASAP - this is absolutely ridiculous.
Did you ask to speak to a manager while you were at the Apple store? -
Need help with case structures- please help :)
Hey all.
I'm currently trying to program a infrared furnace. I'm setting a temperature, subtracted my set temperature from the actual temperature (thermocouple hooked up to SCB-68), and voltage is being sent to the controller of the furnace accordingly. However, I need to hold the set temperature for a certain amount of time. I need help programming this: when the VI reads the set temperature from the thermocouple, it results in a timer running down. When the timer runs down to 0, the While Loop ends. I'm thinking case structures is most appropriate, but if you have a better suggestion, please let me know.
ThanksYou should probably implement a state machine.
The state machine would keep track of the temperature and making ajustments on a timely basis.
There is a template of a state machine is you select under the File menu > New > From Template.
You can also look under Help > Find Example > and do a search for state machine.
There are lots of state machine examples on this forum, some of which may be quite useful.
RayR -
Help with case issues in Java 1.3
Using JDK 1.3 and Windows 98... here is my problem. If I create a class called EventSite.java and another class called eventsite.java (same name, different cases) and then compile them both...I only see the the first class compiled in the directory (they are both being compiled into the same directory).
i.e. I run 'javac EventSite.java' and when I look in the c:\jdk1_3\bin\ directory I see EventSite.class.
I then run 'javac eventsite.java' and when I look in the same directory I only see EventSite.class. Why???????
Where did eventsite.class go?
Note: both .java files compile without error.
Help please.The problem is that Java is case sensitive but Windows is not. So the files get replaced. You have to avoid using this kind of naming under Windows. Besides it doesn't make much sense.
-
Hi Experts !
can you please help me out is removing bug from this statement
select
CASE when p.ASSIGNED is null then
+(+
SUM (
CASE WHEN P.STATUS = 'waiting' AND P.TYPE_ID=1 and trunc(P.INSERT_DATE)= trunc(Sysdate)
and p.INITIATED_BY = 51 and p.IS_DELETE='No' THEN 1 ELSE 0 END
+) planToday,+
SUM (
CASE WHEN P.STATUS = 'waiting' AND P.TYPE_ID=1
and p.INITIATED_BY = 51 and p.IS_DELETE='No' THEN 1 ELSE 0 END
+) planTotal+
+)+
ELSE
+(+
SUM (
CASE WHEN P.STATUS = 'waiting' AND P.TYPE_ID= 1 and trunc(P.INSERT_DATE)= trunc(Sysdate)
and p.ASSIGNED = 51 and p.IS_DELETE='No' THEN 1 ELSE 0 END
+) planToday,+
SUM (
CASE WHEN P.STATUS = 'waiting' AND P.TYPE_ID=1
and p.ASSIGNED = 51 and p.IS_DELETE='No' THEN 1 ELSE 0 END
+) planTotal+
+)+
END
from WF_PLAN P
when i run the query, it gives me
Error Ora - 00907 : 'Missing Right Parenthesis'
Please help out!
Edited by: Zia on Jun 1, 2010 12:55 AMWhat exactly are your expecting the below given segment to display? Two different columns? (That's not the way to get it done)
CASE when p.ASSIGNED is null then
SUM (
CASE WHEN P.STATUS = 'waiting' AND P.TYPE_ID=1 and trunc(P.INSERT_DATE)= trunc(Sysdate)
and p.INITIATED_BY = 51 and p.IS_DELETE='No' THEN 1 ELSE 0 END
SUM (
CASE WHEN P.STATUS = 'waiting' AND P.TYPE_ID=1
and p.INITIATED_BY = 51 and p.IS_DELETE='No' THEN 1 ELSE 0 END
)also you cannot alias a column within case..end.
*009*
Edited by: 009 on Jun 1, 2010 12:17 AM -
I have Adobe Digital Edition 2.0 on my computer. I am receiving a message that it has stopped working.
I had contacted Adobe previously, but the issue was not resolved. Can you please help me?????????????I concur with dwb's assessment. See:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
Macintosh OS X Routine Maintenance,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths, and
Myths of required versus not required maintenance for Mac OS X for information. -
Help with Case Usage or similar
Has anybody tried using similar to below case usage in where clause. Is there any other way i can get this done.
To summarize the query, month starts from 7th of current month to 6th of next month. Query has to dynamically assume that. Please let me know.
Thanks ahead for assistance.
select * from table tc
where tc.column=x and
(case when (to_char(sysdate, 'DD')/7)>=1 THEN
trunc(tc.CREATED_DATE) between to_date('07-'||to_char(sysdate, 'MM-YYYY'), 'DD-MM-YYYY') and
to_date('06-'||to_char(add_months(sysdate, 1), 'MM-YYYY'), 'DD-MM-YYYY')
else
trunc(tc.CREATED_DATE) between to_date('07-'||to_char(add_months(sysdate, -1), 'MM-YYYY'), 'DD-MM-YYYY') and
to_date('06-'||to_char(sysdate, 'MM-YYYY'), 'DD-MM-YYYY')
END)I missed a piece of the calculation. I tried the below query with Aug 6th and 7th. It should work for any day - including SYSDATE;
SQL> with tc as (
select trunc(sysdate -60 + rownum) created_date
from dual
connect by rownum <= 100)
select *
from tc
where created_date between trunc(to_date('06-AUG-07','DD-MON-YY')-6,'MM')+6
and trunc(add_months(to_date('06-AUG-07','DD-MON-YY')-6,1),'MM')+5
CREATED_DATE
07-JUL-07
08-JUL-07
05-AUG-07
06-AUG-07
31 rows selected.
SQL> with tc as (
select trunc(sysdate -60 + rownum) created_date
from dual
connect by rownum <= 100)
select *
from tc
where created_date between trunc(to_date('07-AUG-07','DD-MON-YY')-6,'MM')+6
and trunc(add_months(to_date('07-AUG-07','DD-MON-YY')-6,1),'MM')+5
CREATED_DATE
07-AUG-07
08-AUG-07
05-SEP-07
06-SEP-07
31 rows selected. -
In the VI that i'm enclosing, i have used a boolean array of two booleans to operate two case structures. Inside the case structure, when the boolean is true the shift register value is to be incremented once.The difference between the two incremented values is taken as count. I am facing two problems, firstly, the increment takes place continously instead of just once every time the boolean is true, secondly, the count switches to zero when the switch is turned back to false.
Thanks in advance.
Attachments:
New.vi 11 KBTry something like this.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
NewMODCA.vi 8 KB -
Hello people.
TABLE PHONECALLS FIELDS: EMP_ID, TELNO, COST, TYPE
TYPE can be DATA or VOICE
1 EMP_ID owns more than 1 TELNO
I need a report with the following columns:
EMP_ID, TELNO, VOICE_COST, DATA_COST
I need something like:
SELECT EMP_ID , TELNO, SUM(COST),
SUM(CASE COST WHEN TYPE = DATE THEN ...... END) AS VOICE,
SUM(CASE COST WHEN TYPE = VOICE ...... END) AS DATA
FROM PHONECALLS
GROUP BY EMP_ID, TELNO
ORDER BY EMP_ID ASC;Thank you in advance.Something like this?
SELECT EMP_ID , TELNO, SUM(COST),
SUM(CASE TYPE WHEN 'DATE' THEN COST END) AS VOICE,
SUM(CASE TYPE WHEN 'VOICE' THEN COST END) AS DATA
FROM PHONECALLS
GROUP BY EMP_ID, TELNO
ORDER BY EMP_ID ASC;Or the alternative way of using CASE:
SELECT EMP_ID , TELNO, SUM(COST),
SUM(CASE WHEN TYPE = 'DATE' THEN COST END) AS VOICE,
SUM(CASE WHEN TYPE = 'VOICE' THEN COST END) AS DATA
FROM PHONECALLS
GROUP BY EMP_ID, TELNO
ORDER BY EMP_ID ASC;The first use of CASE is simple - the other can have as complex expressions as needed ;-) -
I'm looking for something to hold my iPhone in the glove box of my BMW. Thx
I use an older fourth gen iPod in my BMW and always leave it in the glove box. I found the original Apple iPod semi-hard case with belt clip that used to come with iPods at that time.(no such accessories included these days unfortunately) I have my iPod safetly inside it inside the glove box. In that case it does not roll around.
I think you can still but these cases zt Apple stores. Else something like that type of case to protect the iPod would be all you need.
Maybe you are looking for
-
I had to change my Apple ID because it was using an email I no longer have access to. I was able to change it just fine. Now when I try an upodate my apps, it brings up my old Aple ID name so I am unable to update my apps. How do I change the that
-
Report painter/writer documentation
hello, does any one of you have Report painter and writer documentation, i am looking for PPT document to train my client. please email me to [email protected] thank you in advance and points will be given. Bushan
-
Can I switch to another Coherence Grid in Java Extend?
The scenario is I have two data grids, the name of the cache are same, but data in the cache is different. I programmed a Java Client (Extend) to the data grid, the Java client is using a configuration file configured to connect with one of the data
-
Canon 70d CR2 files not opening
Hi. I'm sure this has probably been asked before, but I am struggling here. I have the canon 70d, and as my previous photoshop elements 9 couldn't open the RAW files I decided to get the latest version of elements 12. Now I am really upset as this
-
Hi All, I have written a query in oracle 10g, my query is having some rank (), OVER (PARTITION BY..) functions to perform some operation. Are these OLAP functions? I am asking this because we are getting some following message on server logs: ORA-006