Help with Catalyst 2950 G

Hi,
I have a doubt about the Catalyst 2950 series, i need to pass both IP and OSI traffic trought a 2950 switch. Is it supported?
Thanks

The 2950 is a layer2 switch. Anything carried over ethernet will go, no matter which layer3 protocol is used.
Regards,
Leo

Similar Messages

Help with Catalyst 3512 XL CNA

Im not going to lie, I'm pretty much a beginner when it comes to switches. I have recently purchased a second hand 3512 XL which I have managed to connect to via PuTTY and the console cable. I have familiarised myself with access privileges and resetting passwords and locating the IP address, etc.
I am trying to connect the switch to Cisco Network Assistant however I am unable to connect to the switch over a cat5 on the first port (nothing else is on the network, just a server directly to the switch). I have tried pinging the switch from my server, and similarly I have tried pinging the server from the switch and each time there is 100% fail rate. Can anyone help me trace this problem?
Thanks,
samp17

if you just want to have your pc talk to the switch and nothing else ( not connection the swith to the network ) here's what you would have to do:
set your pc an ip address: 192.168.1.1
go to your switch with console cable
enable
conf t
ip default-gateway 192.168.1.1
interface vlan 1
ip address 192.168.1.2 255.255.255.0
end
connect your pc to any port of the switch
from switch ping 192.168.1.1 - should work
=======================================
if you want it in your network then set ip default-gateway to your gateway form your pc (if you use windows go start - run type cmd) and do ipconfig ... find your gateway and set it to switch.
if your pcs ip is 192.168.1.x then set vlan1 ip 192.168.1.55 for example
interface vlan1
ip address 192.168.1.55 255.255.255.0
hth

AAA with Catalyst 2950 switch

I have a Cisco ACS 4.2 running on Windows 2003. Authentication is working fine for various cisco devices like routers, VPN concentrator etc.
Today I added a 48 port L2 switch as a AAA client, the authentication works fine. However I see many failed login attempts from this L2 switch with the user "C"
Message-Type: Authen failed
Caller-ID: async
Authen-Failure-Code: External DB user invalid or bad password
NAS-Port: tty0
What is causing this failed login?

If the console port on the switch generating the spurious login errors is connected to a device offering remote access to the console port, then it's likely that some output from this device is causing the bogus login attempt.
If this device is an IOS router with a bunch of asynch ports add "no exec" to the line connected to the switch console port.

Cisco ISE and Catalyst 2950

Hello!
Please, could you help me? Is it possible to install ISE on Catalyst 2950? In Component Compatibility Guide
http://www.cisco.com/en/US/docs/security/ise/1.0.4/compatibility/ise104_sdt.html
Catalyst 2950 only support 802.1X and VLAN.
At first I need to know about VLAN change(from resticted to corporate). Is Catalyst 2950 support it?
Thaks for help!

this would let both user and machine authenticate. for"5434Endpoint conducted several failed authentications of the same scenario" check Suppress Anomalous Clients option. This issue comes in to picture when endpoint attempts a couple of failed authentications and if Suppress Anomalous Clients option with Reject Requests After Detection is enabled then ISE Policy nodes protect themselves from overwhelming numbers of authentication requests by sending an immediate reject for suppressed clients as opposed to processing all the steps in a normal authentication. So if that user did some authentication failure, he will be locked for 1 hours (bydefault).

802.1x RADIUS authentication problem with Cat 2950 to CiscoSecure ACS 3.3

I wondered if anyone can help or shed any light on the following problem.
I am getting an authentication error when doing a RADIUS authentication to CiscoSecure ACS 3.3 running on a Windows 2003 server, the authentication request is coming from a Catalyst 2950 switch which is doing 802.1x for Windows XP clients. This problem only happens when the XP client connects to 2950 switches, Cat 3550s and 3560s work fine.
The Cat2950 is running 12.1.20 (EA1) which is more or less the latest IOS.
The error I get from ACS 3.3 is "Invalid message authenticator in EAP request" when the 2950 tries to authenticate an XP client for 802.1x to the ACS server using RADIUS.
Doing a RADIUS and 802.1x debug on the 2950 I see a message about 'Unknown EAP type', I am using PEAP on the XP client doing EAP-MS-CHAPv2 authentication, the same XP client authenticates fine with 3550 and 3560 switches problem only affects 2950s. Can anyone confirm the 2950 supports EAP-MS-CHAPv2?
I have checked and re-checked the shared secret and it definitely matches on 2950 and ACS.
One thing I noticed in the RADIUS debug is the 2950 sends 18 bytes for attribute 79 when the RFC defines attribute 79 should be 3 bytes or less, I don't know if this is related to the problem or is correct behaviour.

Hi, I am new with 802.1x, and was hoping that someone would help with these queries:
1. How is a certificate requested without being allowed on a network that is not authenticated with 802.1x. I had to first connect to an active network, retrieve a certificate with the proper username and password, and then physically connect to the port on the 2950 switch which was enabled to do 802.1x
2. My config is as below:
aaa new-model
aaa authentication dot1x default group radius
aaa authenication login default group radius
dot1x system-auth-control
interface f0/1
switchport mode access
dot1x port-control auto
end
I able to login using the radius server, so radius is working (on ports other than f1/0). However when connecting to f1/0, the port on the 2950 remains blocked.
3. The certificate is issued by the ca server, is viewable via Internet explorer,and is issued to the correct username which is on the active directory.
I even tried using local authenication with 802.1x, this did not work
4. If I have a certificate, will this automatically give me access to the 802.1x port?
5. I have windows 2000, and authenication is set to 'Smart Card or other certificate.
Am I missing anything?
Any advise will be greatly appreciated
Chris

Cluster Management Software on Catalyst 2950

Hi There,
I was wondering if anyone would be kind enough to provide me with some help on getting the CMS software running on a Cisco Catalyst 2950 Switch. I have followed all the instructions I could find on getting the software to load from the Switch, but it will not load. Can anyone help me?
Thank you in advance.
John Grikes
[email protected]

You can start from: http://www.cisco.com/warp/public/473/59.html

Catalyst 2950 Switch flash_init error

Hi Everyone,
I'm new to Cisco products and have a small home lab set up. I have a Catalyst 2950 switch that I would like to restore to factory defaults. Here is the issue I'm having and can't figure out.
I pull the power, telnet into the console port, hold the mode button and restore power. The boot loader (Version 12.1(11r) starts and says the usual message the system was interrupted prior to flash initialization (Paraphrasing here)
I get to the switch: command line, enter flash_init. Flash states it initialized and then all I get is a < with an underscore under it prompt. Anything I try to type comes up as bizarre characters and I can not get back to a switch: prompt unless I reboot the switch manually. Unsure of what to do here.
Thanks in advance!
-Matt
Telnet session:
C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(11r)EA1, RELEASE SOFTWARE (fc1)
Compiled Mon 22-Jul-02 18:57 by antonino
WS-C2950T-24 starting...
Base ethernet MAC Address: 00:06:52:bb:c9:40
Xmodem file system is available.
The system has been interrupted prior to initializing the
flash filesystem. The following commands will initialize
the flash filesystem, and finish loading the operating
system software:
flash_init
load_helper
boot
switch: flash_init
Initializing Flash...
flashfs[0]: 4 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 3726848
flashfs[0]: Bytes available: 4014592
flashfs[0]: flashfs fsck took 7 seconds.
...done initializing flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4
õíííííí <---These characters appear no matter what keys I hit.

Hi mattymattlynch
Check the workaround on the following documents:
http://www.cisco.com/c/en/us/support/docs/switches/catalyst-2950-series-switches/41845-192.html
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2950/software/release/12-1_22_ea11x/configuration/guide/scg/swtrbl.html
If no luck , the flash might be corrupted and requires a replacement.
Hope this helps
-Randy-

Cisco Catalyst 2950/2960/3750 Multicast Traffic Preference

Hello all,
we, as a student company act as an ISP for university dormitories. We would like to (if it's possible) deploy QoS to prefer multicast traffic over all other types of traffic.
Devices used in network:
Acces layer: Cisco Catalyst 2950, 12.1(22)EA14
Dristribution layer: Cisco Catalyst 2960G, 12.2(58)SE1
Core layer: Cisco Catalyst 3750G, 12.2(52)SE
Do you see any possibility to solve this with these devices? We have almost no experience with QoS, therefore any help would be greatly appreciated.
Thanks in advance.

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Hmm, I think it should be doable although the 2950s, if non-E variants, are especially weak in QoS features. I.e. those might create some issues.
With the 2960G and 3750G, you often will create problems when you enable QoS because QoS, by default, allocates its buffers resources for 4 egress queues per port rather than using all for 1 egress queue per port. However, this can be countered by QoS parameter tuning, but that takes some QoS expertize to match to your traffic and your overall QoS policy.

CATALYST 2950 SERIES - CLEAR OPT TABLE & DISABLE CASH

I have 2 cisco switches model - catalyst 2950 series, i recently had an network issue regarding an ip conflict with one of my member servers, after being on the phone with microsoft support for 6 days, we were able to resolve the problem by locating the correct mac address and clearing the "OPT table on the switches" by unplugging and replugging the power cord. In order to prevent this from happening again, Microsoft had asked me to contact cisco and ask the following questions, " Are these swiches managable via the gui? and we also need to make sure that the "Arp Cash is disabled on the switches" can anyone help in this matter? Thanks in advance.

Hi Arrowext289,
Thank you for your question. However the Small Business Support Community is limited to Cisco Small Business Products.
Your question below relates to a Cisco Classic Product which our community would not be able to help you with.
The best area for you to post your question would be at the Cisco NetPro forums switching area located here: https://supportforums.cisco.com/community/netpro/network-infrastructure/switching
Best regards,
Cindy
Cindy Toy
Small Business Community Manager
Customer Advocacy
Cisco Systems, Inc.
www.cisco.com/go/smallbizsupport

Catalyst 2950 switch

Hello,
I am using a catalyst 2950 switch and connecting machines which have the operating system as TRU64 UNIX 5.1B (HP make DS25 servers) and WINDOWS XP Professional. The WINDOWS machines are getting connected on the network ( I am able to PING each other), but the UNIX machines are not getting connected on the network. The port LED on the switch is normal (GREEN). The netstat -r command on the UNIX machine shows default as defgw (/etc/routes) and the IP of defgw is defined in the /etc/hosts file. But there is actually no such gateway.
Please help me to get the UNIX machines connected on the network.
Thank You very Much
Best Regards
S R Vijayan

I wonder if the Windows machines are configured to use DHCP? If they are configured for DHCP and there is a DHCP server that is reachable, then it explains why the Windows machines have reachability to each other. If there is not a DHCP server available then the Windows machines are probably taking addresses in 169.254 (which is the default for Windows when it can not acquire from DHCP). This would also explain the ability of Windows machines to communicate with each other. Can the original poster clarify what IP addresses the Windows machines are using?
Then the question becomes how are the Unix machines configured? Are they supposed to use DHCP? Is so is the DHCP server reachable? If not how is the interface on the Unix box configured?
I also think that the suggestion about verifying whether the switch is configured with more than one VLAN is an excellent suggestion.
HTH
Rick

Catalyst 2950 trouble

I have been trying to get a Catalyst 2950 switch to work for over a week now. I received the switches with no box or packaging and I was told that there were no previous setup attempts on it. I tried performing the express setup but the lights on the server don't seem to behave the way the instructions explain. I also was never able to make a connection between the linux server I am trying to use to configure the switch and the switch. All i received was the switch and nothing else. I have an AC power cord and I also found an RJ45 - DB 9 adapter if needed. I have looked through alot of the manuals on the cisco main pages and nothing seems to be working or clicking. Please help!

Results of pinging from switch to linux box and switch to switch were both 0%.
Switch2>show arp
Protocol Address Age (min) Hardware Addr Type Interface
Internet 192.168.1.10 - 000a.8a7a.f280 ARPA Vlan1
No luck pinging switch from linux box again...
Arp -a Results
c358-hsrp102.xxxxx.com (xxx.xxx.102.1) at 00:00:0C:07:xx:xx [ether] on eth0
Route -n Results
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
xxx.xxx.102.0 0.0.0.0 255.255.254.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1
0.0.0.0 148.174.102.1 0.0.0.0 UG 0 0 0 eth0
Ifconfig results
eth0 Link encap:Ethernet HWaddr 00:13:72:FD:xx:xx
inet addr:xxx.xxx.102.78 Bcast:148.174.103.255 Mask:255.255.254.0
inet6 addr: fe80::213:72ff:fefd:871d/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:38172 errors:0 dropped:0 overruns:0 frame:0
TX packets:16406 errors:0 dropped:0 overruns:0 carrier:0
collisions:224 txqueuelen:1000
RX bytes:8127476 (7.7 MiB) TX bytes:3941903 (3.7 MiB)
Interrupt:169
eth1 Link encap:Ethernet HWaddr 00:13:72:FD:87:1E
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::213:72ff:fefd:871e/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:225
eth2 Link encap:Ethernet HWaddr 00:04:23:CD:B5:6A
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Base address:0xecc0 Memory:fe9e0000-fea00000
eth3 Link encap:Ethernet HWaddr 00:04:23:CD:B5:6B
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Base address:0xec80 Memory:fe9c0000-fe9e0000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:6376 errors:0 dropped:0 overruns:0 frame:0
TX packets:6376 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4647441 (4.4 MiB) TX bytes:4647441 (4.4 MiB)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Lot of info there you are only allowed 3 attachments thats why i put it all in here and attached the last 2 hope you can find everything ok.

Catalyst 2950 - Problem updating IOS

I am trying to upgrade from version 12.1 (14) EA1a to version 12.1 (22) EA5 on a Catalyst 2950. When I look at the flash directory, I see the following:
Directory of flash:/
2 -rwx 269 Jan 01 1970 00:01:27 env_vars
3 -rwx 1247 Mar 09 1993 06:09:06 config.text
4 -rwx 5 Mar 09 1993 06:09:06 private-config.text
7 -rwx 110 Mar 01 1993 00:01:39 info
8 -rwx 2958970 Mar 01 1993 00:03:19 c2950-i6q4l2-mz.121-14.EA1a.bin
9 drwx 2304 Mar 01 1993 00:04:30 html
84 -rwx 110 Mar 01 1993 00:04:41 info.ver
7741440 bytes total (2480640 bytes free)
When I try to delete the old file (c2950-i6q4l2-mz.121-14.EA1a.bin), I receive a message that the No such file or directory exists. There is no typo when I entered the filename. Also, there seems to be a discrepancy in what free bytes are being shown as available. The system shows 2480640 free bytes, but by my calculations, there should be 4778425 bytes available. Are they files that are hidden and why can I not delete the other file? Thanks.

Hi,
Are you able to dlete any other file except this from the flash. This could be a problem in accessing the flash properly. I would suggest try formatting the flash:, this will make the flash sectors empty and will be as a new scratched one. This should help in uploading the new IOS.
***** Please make sure that the switch doesnot reboot at while while you format the switch and upgrade the IOS as the switch will fall in rommon with any image.
HTH,
-amit singh

SNMP on Catalyst 2950 switch - possible?

How can I add SNMP to my Catalyst 2950 switch? and what will this give me with regards to network monitoring etc. A lot of my networks go through this device and I what to get stats on port etc. I really hope you can help here.

Hi Chandru,
Here's what you should do. Firstly, go to the following site which will give you a list of MIBs supported on the 2950:
http://www.cisco.com/en/US/products/hw/switches/ps628/products_configuration_guide_chapter09186a00800d84cc.html
Then, open up the Cisco SNMP Object Navigator at:
http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en
Within that, click on 'View and Download MIBs' and then select the MIBs you are interested in to download/view them.
As an example, you can get counters on memory pools from the CISCO-MEMORY-POOL-MIB
Hope that helps - pls rate the post if it does.
Regards,
Paresh.

[SOLVED] Direct Rendering is not working with Catalyst 8.6-1.

I own an ATI Radeon X1300, and everything was working flawlessly with Catalyst 8.5-1, and when I updated the drivers, DRI stopped working. It has happened with me in the past, and the only solution I had found then was to downgrade the drivers. I appreciate your help.
Here is my /etc/X11/Xorg.conf:
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
DisplaySize 338 270 # 1280x1024 96dpi
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Here is my /var/log/Xorg.0.log:
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux localhost 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 18:07:19 CEST 2008 i686
Build Date: 21 June 2008 05:47:59PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 23 13:57:45 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "aticonfig-Screen[0]" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]"
(**) | |-->Device "aticonfig-Device[0]"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "PS/2 Mouse"
(**) Option "AllowMouseOpenFail" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,005e card 1043,815a rev a3 class 05,80,00 hdr 00
(II) PCI: 00:01:0: chip 10de,0050 card 1043,815a rev f3 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0052 card 1043,815a rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,005a card 1043,815a rev a2 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,005b card 1043,815a rev a3 class 0c,03,20 hdr 80
(II) PCI: 00:06:0: chip 10de,0053 card f043,815a rev f2 class 01,01,8a hdr 00
(II) PCI: 00:07:0: chip 10de,0054 card 1043,815a rev f3 class 01,01,85 hdr 00
(II) PCI: 00:08:0: chip 10de,0055 card 1043,815a rev f3 class 01,01,85 hdr 00
(II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev f2 class 06,04,01 hdr 01
(II) PCI: 00:0a:0: chip 10de,0057 card 1043,812a rev f3 class 06,80,00 hdr 00
(II) PCI: 00:0b:0: chip 10de,005d card 0000,0000 rev f3 class 06,04,00 hdr 01
(II) PCI: 00:0c:0: chip 10de,005d card 0000,0000 rev f3 class 06,04,00 hdr 01
(II) PCI: 00:0d:0: chip 10de,005d card 0000,0000 rev f3 class 06,04,00 hdr 01
(II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:01:0: chip 1106,3044 card 1043,81fe rev c0 class 0c,00,10 hdr 00
(II) PCI: 05:00:0: chip 1002,7187 card 17ee,7187 rev 00 class 03,00,00 hdr 80
(II) PCI: 05:00:1: chip 1002,71a7 card 17ee,7186 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:9:0), (0,1,1), BCTRL: 0x0204 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfdf00000 - 0xfdffffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:11:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:12:0), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:13:0), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:14:0), (0,5,5), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 5 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX[b]
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX[b]
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b]
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0xfde00000 - 0xfdefffff (0x100000) MX[b]
(II) Bus 5 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:24:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(--) PCI:*(5:0:0) ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] rev 0, Mem @ 0xd0000000/28, 0xfdef0000/16, I/O @ 0x9c00/8, BIOS @ 0xfdec0000/17
(--) PCI: (5:0:1) ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] (Secondary) rev 0, Mem @ 0xfdee0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[1] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[2] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[3] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[4] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[5] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[6] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[7] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[10] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[11] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[12] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[13] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[14] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[15] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[16] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[17] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[18] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[19] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[20] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[21] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[22] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[23] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[24] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[25] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[1] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[2] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[3] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[4] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[5] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[6] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[7] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[10] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[11] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[12] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[13] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[14] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[15] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[16] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[17] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[18] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[19] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[20] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[21] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[22] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[23] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[24] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[25] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[5] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[9] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[10] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[11] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[13] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[17] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[18] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[19] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[20] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[21] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[22] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[23] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[24] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[25] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[26] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[27] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[28] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[29] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[30] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[31] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[32] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.50.3
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) Primary Device is: PCI 05:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.50.3
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.501
(II) ATI Proprietary Linux Driver Build Date: Jun 2 2008 22:46:56
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:5:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x7187) found
(WW) fglrx: No matching Device section for instance (BusID PCI:5:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[5] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[9] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[10] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[11] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[13] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[17] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[18] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[19] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[20] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[21] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[22] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[23] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[24] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[25] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[26] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[27] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[28] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[29] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[30] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[31] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[32] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x9fa1880
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[5] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[9] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[10] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[11] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[13] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[20] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[21] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[22] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[23] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[24] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[25] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[26] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[27] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[28] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[29] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[30] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[31] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[32] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[33] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[34] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[35] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): PCI bus 5 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(--) fglrx(0): Chipset: "Radeon X1300/X1550 Series" (Chipset = 0x7187)
(--) fglrx(0): (PciSubVendor = 0x17ee, PciSubDevice = 0x7187)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfdef0000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 9.12
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: RV515
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:5:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports PCI:5:0:0
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.50.3
ABI class: X.Org Server Extension, version 0.3
(II) fglrx(0): Using adapter: 5:0.0.
(II) fglrx(0): [FB] Find the MC FB aperturs range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
(--) fglrx(0): VideoRAM: 262144 kByte, Type: DDR1
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display1: CRT on secondary DAC [crt2]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: PHL Model: 13 Serial#: 1850
(II) fglrx(0): Year: 2005 Week: 9
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync: Separate
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.626 redY: 0.340 greenX: 0.288 greenY: 0.608
(II) fglrx(0): blueX: 0.148 blueY: 0.064 whiteX: 0.283 whiteY: 0.298
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 94.5 MHz Image Size: 310 x 230 mm
(II) fglrx(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) fglrx(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) fglrx(0): Serial No: 09301850
(II) fglrx(0): Monitor name: Philips 107Et
(II) fglrx(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 72 kHz, PixClock max 110 MHz
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff00410c13003a070000
(II) fglrx(0): 090f0103682018782a4f29a057499b26
(II) fglrx(0): 10484ca4420031594559615981800101
(II) fglrx(0): 010101010101ea240060410028303060
(II) fglrx(0): 130036e61000001e000000ff00303933
(II) fglrx(0): 30313835300a20202020000000fc0050
(II) fglrx(0): 68696c697073203130374574000000fd
(II) fglrx(0): 0032a01e480b000a20202020202000b2
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - CRT on secondary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay not supported on this hardware
(==) fglrx(0): Qbs is not supported in this release. Disabled.
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 40 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x47.0 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync (50.9 kHz)
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x43.0 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync (46.3 kHz)
(**) fglrx(0): *Mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 (60.0 kHz)
(**) fglrx(0): *Mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0): *Mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0): *Mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"x43.0 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync (39.2 kHz)
(**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 (68.7 kHz)
(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 (60.0 kHz)
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"x72.0 78.43 1024 1080 1192 1360 768 769 772 801 +hsync (57.7 kHz)
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768"x43.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace (35.5 kHz)
(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600"x85.0 56.25 800 832 896 1048 600 601 604 631 (53.7 kHz)
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 (46.9 kHz)
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 (48.1 kHz)
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync (43.8 kHz)
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 (37.9 kHz)
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 (35.2 kHz)
(**) fglrx(0): Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600"x100.0 68.17 800 848 936 1072 600 601 604 636 +hsync (63.6 kHz)
(**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600"x90.0 60.06 800 840 928 1056 600 601 604 632 +hsync (56.9 kHz)
(**) fglrx(0): *Mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 +hsync +vsync (43.3 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"x72.0 31.50 640 664 704 832 480 489 492 520 +hsync +vsync (37.9 kHz)
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0): Default mode "640x480": 52.4 MHz (scaled from 0.0 MHz), 61.8 kHz, 120.0 Hz
(II) fglrx(0): Modeline "640x480"x120.0 52.40 640 680 744 848 480 481 484 515 +hsync (61.8 kHz)
(**) fglrx(0): Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480"x100.0 43.16 640 680 744 848 480 481 484 509 +hsync (50.9 kHz)
(**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480"x90.0 37.89 640 672 736 832 480 481 484 506 +hsync (45.5 kHz)
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"x75.0 28.07 640 696 736 832 400 413 415 449 (33.7 kHz)
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 24.92 640 664 760 792 400 460 462 525 (31.5 kHz)
(**) fglrx(0): Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384"x75.0 19.68 512 528 576 632 384 384 385 416 (31.1 kHz)
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 19.81 512 544 624 664 384 451 453 497 (29.8 kHz)
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x75.0 24.75 400 408 448 528 300 601 602 625 doublescan (46.9 kHz)
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0 22.33 400 416 480 496 300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x75.0 15.75 320 328 360 416 240 481 482 501 doublescan (37.9 kHz)
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0 12.59 320 328 376 400 240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x75.0 13.10 320 352 368 416 200 406 407 417 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0 12.59 320 336 384 400 200 457 459 524 doublescan (31.5 kHz)
(**) fglrx(0): Display dimensions: (338, 270) mm
(WW) fglrx(0): Probed monitor is 320x240 mm, using Displaysize 338x270 mm
(**) fglrx(0): DPI set to (96, 96)
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x47.0 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync (50.9 kHz)
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x43.0 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync (46.3 kHz)
(**) fglrx(0): *Mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 (60.0 kHz)
(**) fglrx(0): *Mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0): *Mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0): *Mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"x43.0 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync (39.2 kHz)
(**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 (68.7 kHz)
(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 (60.0 kHz)
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"x72.0 78.43 1024 1080 1192 1360 768 769 772 801 +hsync (57.7 kHz)
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768"x43.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace (35.5 kHz)
(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600"x85.0 56.25 800 832 896 1048 600 601 604 631 (53.7 kHz)
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 (46.9 kHz)
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 (48.1 kHz)
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync (43.8 kHz)
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 (37.9 kHz)
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 (35.2 kHz)
(**) fglrx(0): Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600"x100.0 68.17 800 848 936 1072 600 601 604 636 +hsync (63.6 kHz)
(**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600"x90.0 60.06 800 840 928 1056 600 601 604 632 +hsync (56.9 kHz)
(**) fglrx(0): *Mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 +hsync +vsync (43.3 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"x72.0 31.50 640 664 704 832 480 489 492 520 +hsync +vsync (37.9 kHz)
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0): Default mode "640x480": 52.4 MHz (scaled from 0.0 MHz), 61.8 kHz, 120.0 Hz
(II) fglrx(0): Modeline "640x480"x120.0 52.40 640 680 744 848 480 481 484 515 +hsync (61.8 kHz)
(**) fglrx(0): Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480"x100.0 43.16 640 680 744 848 480 481 484 509 +hsync (50.9 kHz)
(**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480"x90.0 37.89 640 672 736 832 480 481 484 506 +hsync (45.5 kHz)
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"x75.0 28.07 640 696 736 832 400 413 415 449 (33.7 kHz)
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 24.92 640 664 760 792 400 460 462 525 (31.5 kHz)
(**) fglrx(0): Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384"x75.0 19.68 512 528 576 632 384 384 385 416 (31.1 kHz)
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 19.81 512 544 624 664 384 451 453 497 (29.8 kHz)
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x75.0 24.75 400 408 448 528 300 601 602 625 doublescan (46.9 kHz)
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0 22.33 400 416 480 496 300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x75.0 15.75 320 328 360 416 240 481 482 501 doublescan (37.9 kHz)
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0 12.59 320 328 376 400 240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x75.0 13.10 320 352 368 416 200 406 407 417 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0 12.59 320 336 384 400 200 457 459 524 doublescan (31.5 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000001f
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 255 MB
(II) fglrx(0): [pcie] 261120 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b]
[1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[7] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[8] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[9] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[10] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[11] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[12] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[13] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[19] 0 0 0x00009c00 - 0x00009cff (0x100) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[22] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[23] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[24] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[25] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[26] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[27] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[28] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[29] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[30] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[31] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[32] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[33] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[34] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[35] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[36] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[37] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[38] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.2.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:5:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports PCI:5:0:0
(II) [drm] DRM interface version 1.0
(II) [drm] DRM open master succeeded.
(II) fglrx(0): [drm] Using the DRM lock SAREA also for drawables.
(II) fglrx(0): [drm] framebuffer handle = 0xac000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.49.7
(II) fglrx(0): Date: May 12 2008
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xab000 at 0xb7653000
(II) fglrx(0): [drm] Closed DRM master.
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x10000000
(==) fglrx(0): Write-combining range (0xd0000000,0x10000000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 7167
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(WW) fglrx(0): Textured Video not supported without DRI enabled.
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 7.1.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(EE) fglrx(0): XMM failed to open CMMQS connection.
(II) fglrx(0): XMM failed to initialize!
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "abnt2"
(**) Keyboard0: XkbModel: "abnt2"
(**) Option "XkbLayout" "br"
(**) Keyboard0: XkbLayout: "br"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "auto"
(**) PS/2 Mouse: Device: "/dev/psaux"
(**) PS/2 Mouse: Protocol: "auto"
(**) Option "SendCoreEvents" "true"
(**) Option "CorePointer"
(**) PS/2 Mouse: always reports core events
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "true"
(**) Option "Emulate3Timeout" "70"
(**) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 70
(**) Option "ZAxisMapping" "4 5"
(**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: Buttons: 9
(**) PS/2 Mouse: Sensitivity: 1
(II) evaluating device (PS/2 Mouse)
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(--) PS/2 Mouse: PnP-detected protocol: "ExplorerPS/2"
(II) PS/2 Mouse: ps2EnableDataReporting: succeeded
Last edited by DarkForte (2008-06-23 22:40:05)

From your Xorg.0.log:
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.49.7
(II) fglrx(0): Date: May 12 2008
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
You have to quit X, then rmmod and modprobe the kernel module - you're still using the old one. (a reboot would technically fix it too)
# rmmod fglrx
# modprobe fglrx
# dmesg | tail
The dmesg output should say you've successfully loaded the 8.501 driver.

Help With API Integration

Our company has decided to use Business Catalyst but we need help with an activation wizard for our product. This activation is also used to create a recurring monthly billing order.
We're thinking we need to use the API, here's our basic flow:
Customer Clicks Activation Button
Prompted to Login or Register
Customer looks up unit number (Can be called via a provider API)
       Unit number is placed into field
Customer fills in billing information (or can it be pulled via BC API?)
          Name
          Address
          Phone
          Email
          Credit Card Info
Order is sent to BusinessCatalyst WebServices API to create recurring order
Billing Information is attached to Provider Database via API
Customer is forwarded to Subscription_thank_you page (url to be determined later)
Our team has never worked with the BC API and would like to know the best route to handle this scenario...should we embed the application in an iframe and put the iframe on a page in a secure zone or should we use the API to push user information from our BC site to an app residing on a subdomain? If anyone has experience with this type of situation or can point us to someone that has, please let me know, it would be greatly appreciated!
Thanks,
Andy

Ok, we have a solution in the works that includes javascript, but would like to know if we can pass custom arguments through the /FormProcessv2.aspx script.url so that we could invoke a different receipt - buy page based on url arguments. We would want to include two hidden field entries that we will be including in the form and will add them using a custom onclick event for the check out form submit button. This would allow the javascript planted on the receipt - buy page to know what path the buyer is coming from. We'll have buyers that are buying the normal route, simply adding items to their cart, but will also have people activating their device which includes purchasing a recurring product for which we will use javascript to automatically add to cart. The receipt - buy page will stay in the original form for all buyers simply adding items to their cart and purchasing, but will change when they are activating. The passed url arguments will tell our javascript which type of customer they are and will load the page accordingly. Will /FormProcessv2.aspx strip out our customer arguments and resort back to the default?
Thanks,
Andy

Help with Catalyst 2950 G

Similar Messages

Maybe you are looking for