Help with chapter/marker issue, please

Using DVDSPRO 2.0.5.
One track, 58 mins of movie.
Have set five chapter markers and buttons, plus one 'Play Whole Movie' button.
Playback via 'Play Whole Movie' button results in playback of Whole Movie track stopping at the end of each chapter and jumping back to Main Menu.
It did not do this playback jump-back on my set-top box, but it DID do it on a client's player. Oh dear.
What am I doing wrong? Why won't the Main Movie Track play straight through (i.e. ignore) each marker and continue to the absolute end, i.e. minute 58?
(End Jump of Whole Movie track is set to Main Menu.)
Can this only be avoided by using Stories, and telling the Main Track that it must play through without stopping at the Chapter Markers?
G4 Quicksilver 860 Mhz Mac OS X (10.3.9) FCP 4.5 HD

My own solution:
Create a second 'Whole Movie' track with the same Whole Movie asset. This Track is connected to the Play Whole Movie Button. The track has NO Chapter Markers. It of course jumps back to Main menu at its end,
The original 'Whole Movie' track with Chapter Markers is re-named to 'Story Track'. The Chapter Buttons are connected to this markers on track.
Might this fix the problem for EVERY SET-TOP BOX?
SDG

Similar Messages

Help with some iPhone issues please

Ok, I am starting to have some problems with my iPhone 3G, and would really appreciate any help with these issues.. here is what is happening
1) iPhone Vibrate is pretty much broken, turns off and on vibrate by itself.. and now is vibrating very softly.
2) iPhone wont sync my Music anymore, I have 3 playlists that I use on my iPhone, and none of them will update. When I sync my iPhone, everything syncs but the music.
3) iPhone sometimes completely freezes and i cant get it to go to the locksreen or power off, so I have to do a hard restart.

Hi Matt,
Try restoring the iPhone, this article: http://support.apple.com/kb/HT1414 will walk you through the process.
If the vibrate and unlock issues persists, the iPhone may need hardware repair. Just make a reservation to have a Genius, at a local Apple retail store, take a look at it or call AppleCare.
http://www.apple.com/retail/geniusbar/
U.S. iPhone technical support: 1-800-MY-IPHONE (1-800-694-7466)
Message was edited by: Jason L

[LSMW][IDOC Method] Help with CLFMAS Classification issue please

Hello Everybody,
I'm using CLFMAS for classification, I need to have 3 caracteristics ( I'm talking about segment : E1AUSPM ), I mean for example :
E1AUSPM-MSGFN = '009'
E1AUSPM-ATNAM = 'Characteristic 1' (it's a hardcoded value)
E1AUSPM-ATWRT = MyStrucutre - Field1
E1AUSPM-MSGFN = '009'
E1AUSPM-ATNAM = 'Characteristic 2' (it's a hardcoded value)
E1AUSPM-ATWRT = MyStrucutre - Field2
E1AUSPM-MSGFN = '009'
E1AUSPM-ATNAM = 'Characteristic 3' (it's a hardcoded value)
E1AUSPM-ATWRT = MyStrucutre - Field3
Can anyone please help me to resolve this issue. I'm thinking of using Transfer Record but I don't know how to do this exactly.
Thanks for any possible help you would give

I find the solution, hope it will help somebody else.
1 - In the ' Field mapping and conversion rules 'step, press CTRL+F7. In the popup shown, check ' Processing Times '.
2 - You're gonna see 'begin_of_record' and 'end_of_record' instructions in each segment.
3 - Choose the segment you want to duplicate
4 - Assign Characteristic1 and MyStructure-Field1 to the corresponding fields.
5 - In the end_of_record instruction, add the following lines :
E1AUSPM-ATNAM = 'CHARACTERISTIC 2'.
E1AUSPM-ATWRT = MyStructure-Field2.
transfer_record.
E1AUSPM-ATNAM = 'CHARACTERISTIC 3'.
E1AUSPM-ATWRT = MyStructure-Field3.
transfer_record.
NB : E1AUSPM is the name of the segment I want to duplicate.
MyStructure is the name of the source structure I use.
Field1 and Field2 are the source fields I want to map with the field ATWRT of E1AUSPM segment.
If you don't get something, I'm here to help.

Can somebody help with my color issue please.

I recently updated my Itunes to the 8.0 version and now I have like a pink and purple itunes where the music is displayed. it dont really bother me to much but my wife wants hers to be that color and I have no clue hoe mine even got like that in order to help her do hers. And if there is a way to change my colors I would do that to. Can anyone help me please?

You need to change a windows setting on your display for 32-bit color. Look for other posts with "pink" in the title if you need more exact steps.

Help with time capsule issues please

Hi all
Any help or advise will be greatly appreciated.
I will give you a little background info as it may be relevant.
At home we had 2 MacBook pro's that backed up to a 2tb time capsule all worked well, wifi and back ups. Unfortunately both MacBooks where in boot/trunck of the car while we where traveling and the boot had a terrible leak that I was unaware of and both MacBooks where water damaged tried drying them out but both where beyond repair. (Devastation is not the word especially as the car insurance would not pay out)
Unable to replace both MacBooks We continued to use the time capsule as a wireless router for both our iPhones then after 6 months or so the Internet would go off and the orange flashing light would come on. I just thought it needed reset and so switched it off and back on. Sure enough green light and all is well this became more and more frequently until the orange light stayed on regardless of what I do with no Internet. I've connected an old router which is working fine.
The good news is that after a year without a MacBook I have a new one arriving tommorow. My main concern is the data on the TC I don't want to loose it but i don't know what to do?
These are my options as I see it but again any suggestion welcome.
1)I unpack the new MacBook pro set it up as normal then connect to the TC and check airport utility and hopefully this will tell me it just needs a firmware update. Install the update for TC reboot and check the green light is on, then to a fresh install for the mac and re-install the MacBook from the TC.
2) when booting up the new MacBook try and find the TC when it asks for it and hope all goes well and it transfers my old MacBook data onto my new one.
As I say any help or advise would be greatly appreciated, please note my primary concern is not loosing the data on the TC from my old MacBook
Thanks for all the replys in advance

It sounds like your TC has become unreliable.. is it a series 1?
You might need to get it repaired, as it can take several hours to get the backups off the drive.
Check in UK for local repairers.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repairers
It is just the power supply gone faulty and repair or replacement should get it going again. The data stored on the hard drive should be ok. Restoring the files from the old TM should be ok.
The instructions here are extremely helpful for how to recover particular files. As your new laptop will be Lion and you don't want to recover the old OS.. just the various files you had stored.
http://web.me.com/pondini/Time_Machine/Troubleshooting.html

Can anyone help with Double Command issues. This a specific keyboard question and they do not seem to know.

Before I go into a lengthy explanation of the problem: Can anyone help with Double Command issues. This a specific keyboard question and they do not seem to know.
Thanks much.
Emile

Choose Force Quit from the Apple menu and close Mail from there.
(103661)

Background image seems to be applied twice Can someone help with this CSS issue....

Can someone help with this CSS issue....
http://66.162.81.144/cms400min/default.aspx
If you view the main page you will see that our background is
2 shades of
orange.. if you look at the line that divides those colors to
the right and
left you wil notice that the line is higher
if you notice that it seems that there is another background
on top of the
first one..its the only thing i can think of..
the only place where the image is being referenced is in this
CSS style
html, body
min-height:100%;
margin-bottom:1px;
text-align:center;
background-repeat:no-repeat;
background-image:url(images/Background-Color2.jpg);
background-color:#F74902;
background-position:center;
background-attachment:fixed;
Is there something wrong with the above CSS that could or
would cause this?
is it because im applying the image to both the HTML and
BODY?
ASP, SQL2005, DW8 VBScript, Visual Studio 2005, Visual Studio
2008

You've attached the background to both the html and the body.
I would do this:
html, body {
min-height:100%;
margin-bottom:1px;
body{
text-align:center;
background-repeat:no-repeat;
background-image:url(images/Background-Color2.jpg);
background-color:#F74902;
background-position:center;
background-attachment:fixed;
Having said that the image doesn't look any higher on the
right than the
left to me in Firefox. Is it just an optical illusion?
Daniel wrote:
> Can someone help with this CSS issue....
>
>
http://66.162.81.144/cms400min/default.aspx
>
> If you view the main page you will see that our
background is 2 shades of
> orange.. if you look at the line that divides those
colors to the right and
> left you wil notice that the line is higher
>
> if you notice that it seems that there is another
background on top of the
> first one..its the only thing i can think of..
>
> the only place where the image is being referenced is in
this CSS style
>
> html, body
>
> {
>
> min-height:100%;
>
> margin-bottom:1px;
>
> text-align:center;
>
> background-repeat:no-repeat;
>
> background-image:url(images/Background-Color2.jpg);
>
> background-color:#F74902;
>
> background-position:center;
>
> background-attachment:fixed;
>
>
> }
>
> Is there something wrong with the above CSS that could
or would cause this?
> is it because im applying the image to both the HTML and
BODY?
>

Need some help with the colour profile please. Urgent! Thanks

Dear all, I need help with the colour profile of my photoshop CS6.
I've taken a photo with my Canon DSLR. When I opened the raw with ACDSee, the colour looks perfectly ok.
So I go ahead and open in photoshop. I did nothing to the photo. It still looks ok
Then I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
And the colour started to get messed up.
And the output is a total diasater
Put the above photo side by side with the raw, the red has became crimson!!
So I tried the other option, Use the embedded profile
The whole picture turns yellowish in Photoshop's interface
And the output is just the same as the third option.
Could someone please guide me how to fix this? Thank you.

I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
always use the embedded profile when opening tagged images in Photoshop - at that point Photoshop will convert the source colors over to your monitor space correctly
if your colors are wrong at that point either your monitor profile is off, or your source colors are not what you think they are - if other apps are displaying correctly you most likely have either a defective monitor profile or source profile issues
windows calibrate link:
http://windows.microsoft.com/en-US/windows7/Calibrate-your-display
for Photoshop to work properly, i recall you want to have "use my settings for this device" checked in Color Management> Device tab
you may want to download the PDI reference image to check your monitor and print workflows
and complete five easy steps to profile enlightenment in Photoshop
with your settings, monitor profile and source profiles sorted out it should be pretty easy to pinpoint the problem...

Need help with threads?.. please check my approach!!

Hello frnds,
I am trying to write a program.. who monitors my external tool.. please check my way of doing it.. as whenever i write programs having thread.. i end up goosy.. :(
first let me tell.. what I want from program.. I have to start an external tool.. on separate thread.. (as it takes some time).. then it takes some arguments(3 arguments).. from file.. so i read the file.. and have to run tool.. continously.. until there are arguments left.. in file.. or.. user has stopped it by pressing STOP button..
I have to put a marker in file too.. so that.. if program started again.. file is read from marker postion.. !!
Hope I make clear.. what am trying to do!!
My approach is like..
1. Have two buttons.. START and STOP on Frame..
START--> pressed
2. check marker("$" sign.. placed in beginning of file during start).. on file..
     read File from marker.. got 3 arg.. pass it to tool.. and run it.. (on separate thread).. put marker.. (for next reading)
     Step 2.. continously..
3. STOP--> pressed
     until last thread.. stops.. keep running the tool.. and when last thread stops.. stop reading any more arguments..
Question is:
1. Should i read file again and again.. ?.. or read it once after "$" sign.. store data in array.. and once stopped pressed.. read file again.. and put marker ("$" sign) at last read line..
2. how should i know when my thread has stopped.. so I start tool again??.. am totally confused.. !!
please modify my approach.. if u find anything odd..
Thanks a lot in advance
gervini

Hello,
I have no experience with threads or with having more than run "program" in a single java file. All my java files have the same structure. This master.java looks something like this:
---master.java---------------------------------------------------
import java.sql.*;
import...
public class Master {
public static void main(String args []) throws SQLException, IOException {
//create connection pool here
while (true) { // start loop here (each loop takes about five minutes)
// set values of variables
// select a slave process to run (from a list of slave programs)
execute selected slave program
// check for loop exit value
} // end while loop
System.out.println("Program Complete");
} catch (Exception e) {
System.out.println("Error: " + e);
} finally {
if (rSet1 != null)
try { rSet1.close(); } catch( SQLException ignore ) { /* ignored */ }
connection.close();
-------end master.java--------------------------------------------------------
This master.java program will run continuously for days or weeks, each time through the loop starting another slave process which runs for five minutes to up to an hour, which means there may be ten to twenty of these slave processes running simultaneously.
I believe threads is the best way to do this, but I don't know where to locate these slave programs: either inside the master.java program or separate slave.java files? I will need help with either method.
Your help is greatly appreciated. Thank you.
Logan

Help with production jvm issues at customer site

Following is a brief overview of two production issues experienced by an Oracle customer. Customer is currently running 32 bit Java 1.5_20 on Solaris 64 bit OS.
1)     OOM heap issues – SR #3-2611053901 – Recently we have been seeing OOM errors due to heap space. What we have seen is that some of the instances are not able to free up any memory space even after full GC, which results into a series of full GC’s back to back and eventually leads to OOM. During this time when continuous full GC is going on, we have seen the TCP connections and active JDBC connections shoot up and also lots of stuck threads. This error occurs during peak hours.
This is the output just before OOM. Just to be clear, this line is printed as last line of Full GC which meant that OOM happened right after Full GC:
[PSYoungGen: 111616K->82323K(172544K)] [PSOldGen: 1865727K->1865727K(1865728K)] 1977343K->1948051K(2038272K) [PSPermGen: 209111K->209061K(210944K)] GC time is exceeding GCTimeLimit of 98%, 13.3644395 secs]
2)     OOM swap space- SR: #3-1724941721 – From time to time, we get Exception in thread "CompilerThread0" java.lang.OutOfMemoryError: requested 32756 bytes for ChunkPool::allocate. Out of swap space?’ error in our production. Mostly this error occurs during off hours or off-peak hours. When this happen, there is plenty of heap and perm memory available which indicates that this is a native memory error. We already put two workarounds suggested by Oracle i.e. -XX:CodeCacheMinimumFreeSpace=8m -XX:ReservedCodeCacheSize=128m but still running into this problem.
What we are looking for:
1)     Recommendations on tuning our config parameters -
These are some recommendations we discussed internally. Please validate these recommendations and provide us the recommended values. We would also welcome any new recommendation on updating other parameters if that will help with our issues.
•     Change Xmx to 2048m and MaxPermSize to 512m
•     Specify ratio of young generation to old generation (-XX:NewRatio), and possibly survivor spaces.
•     Use Concurrent old generation collector (-XX:+UseConcMarkSweepGC), with a compatible parallel young generation collector (-XX:+UseParNewGC)
Our current config settings are:
JAVA Memory arguments: -Did=chaserels-cm21 -Xms1024m -Xmx2048m -XX:MaxPermSize=1024m -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:CodeCacheMinimumFreeSpace=8m -XX:ReservedCodeCacheSize=128m -verbose:gc -Dcom.sun.management.jmxremote=true -Dcom.sun.management.jmxremote.port=1641 -Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.ssl=false -Djava.awt.headless=true -Dfile.encoding=ISO646-US
In a subset of servers, the settings are same as above but for MaxPermSIze, which is set to -XX:MaxPermSize=512m
2)     Diagnostic help in how to further narrow down to the problem and what tool to use to gather heap dumps
We have tried to take heap dump using jmap on our production servers when OOM occurs due to heap but most of the time, we run into an exception (attached - which is probably an unresolved jvm bug). While we researched some alternatives to jmap for taking heap dumps, most of these require changing the start-up scripts or installing the tool on production system which may have a performance overhead. What we want is a least intrusive tool which could provide us heap dumps/snapshots without much overhead and could be preferably used remotely. If there are other ways of collecting data than heap dump, we could also use them.
Let me know if you have any questions or need any data.
Thanks for your help.
Error from heap dump :
Exception in thread "main" sun.jvm.hotspot.debugger.UnalignedAddressException: Trying to read at address: 0xfec080a7 with alignment: 4
at sun.jvm.hotspot.debugger.DebuggerUtilities.checkAlignment(DebuggerUtilities.java:40)
at sun.jvm.hotspot.debugger.proc.ProcDebuggerLocal.readCInteger(ProcDebuggerLocal.java:309)
at sun.jvm.hotspot.debugger.DebuggerBase.readAddressValue(DebuggerBase.java:425)
at sun.jvm.hotspot.debugger.proc.ProcDebuggerLocal.readOopHandle(ProcDebuggerLocal.java:326)
at sun.jvm.hotspot.debugger.proc.ProcAddress.getOopHandleAt(ProcAddress.java:96)
at sun.jvm.hotspot.oops.Oop.getKlassForOopHandle(Oop.java:198)
at sun.jvm.hotspot.oops.ObjectHeap.newOop(ObjectHeap.java:346)
at sun.jvm.hotspot.runtime.JavaThread.getThreadObj(JavaThread.java:333)
at sun.jvm.hotspot.utilities.AbstractHeapGraphWriter.writeJavaThreads(AbstractHeapGraphWriter.java:113)
at sun.jvm.hotspot.utilities.AbstractHeapGraphWriter.write(AbstractHeapGraphWriter.java:98)
at sun.jvm.hotspot.utilities.HeapHprofBinWriter.write(HeapHprofBinWriter.java:399)
at sun.jvm.hotspot.tools.JMap.writeHeapHprofBin(JMap.java:133)
at sun.jvm.hotspot.tools.JMap.writeHeapHprofBin(JMap.java:143)
at sun.jvm.hotspot.tools.JMap.run(JMap.java:71)
at sun.jvm.hotspot.tools.Tool.start(Tool.java:204)
at sun.jvm.hotspot.tools.JMap.main(JMap.java:126)

1)     OOM heap issues – SR #3-2611053901 – Recently we have been seeing OOM errors due to heap space. What we have seen is that some of the instances are not able to free up any memory space even after full GC, which results into a series of full GC’s back to back and eventually leads to OOM. Which would be exactly what would happen if there were many objects which were not eligible for collection.
Causes would be either a bug (something not releasing something it should) or because the server is overloaded.
If there were no code changes it could still be a bug that has now only become apparent due to changes in usage patterns.
If that is the case then such bugs can usually be made more apparent by reducing the maximum heap. Doing that will cause it to occur faster.

Can you help with my connection issues

I cannot connect to my Contribute CS3 even though my server is fine. Does anyone have any suggestions? I spent the last hour on the phone with my server company and they tried but failed to help me connect.

Please try the following steps.
Delete the existing connection from Edit -> My connection .
Create a new connection and when you Click the Advanced button next to the "How do you connect to your web server?" field in the Connection Information dialog box.
Try toggling the Passive Mode check box (if it is unchecked, check it; if it is checked, uncheck it).
If you are behind a firewall, check the Use firewall/proxy settings when connecting check box and click the Firewall Settings or Proxy Settings button to enter firewall information. Ask your local network administrator for help with these settings.
Once done with the new connection you would be able to connect to your website. For more information on connection issues you may use this link http://helpx.adobe.com/contribute/kb/troubleshoot-connection-problems-contribute.html
Regards,
Rajeev

I need some help with my GPS issue

I'm writing to ask you if You could somehow help me solve my GPS issue. I own Nokia 5800 XpressMusic. I've recently updated it's software and installed the new OVI Maps. I know that there is an option to use it offline which means without an Internet connection. When I start the Maps application and choose the offline mode, the only thing that appears at the top of the screen is "Searching position". The map is available but my position can't be specified without Internet on. When I turn my wireless router on, even though my maps are set in offline mode, it automatically connects to the Internet and spends something like 5KB download. If I keep navigating it spends even more. I've left my mobile phone offline to search for my position for an about half an hour but nothing happened. So, my question is, could you tell me what to do and how to use OVI Maps offline?

Assuming you are useing Maps 3.06 from beta labs and the map data is the latest compatible maps installed through ovi suite, then all should work well provided you followed the installation instructions correctly. If you don't use assisted gps or any other method of positioning except integrated Gps then you need to be in an open space with clear view of the sky to allow the GPS antenna to get a lock, this can take 10 to 30 minutes (the first time you try for a lock, shouldn't take that long again) and once you have a lock the location should work fine. The reason the other methods are available is thet they speed up the whole process and also work when in built up areas where buildings can block thre satelite view from the gps antenna. The amount of data used to lock your position is minimal and unless you have zero data allowance I suggest using all the positioning methods. If using the navigation abroad, you can disable evrything and simply use integrated GPS as long as you've loaded the local map data to your phone previously.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Need help with icloud activation lock please

hi firends
i have be dragged by apple for last 3 weeks or so i had purchased a device in new zealand with orignal proof of purchase submitted to apple icloud team and the best part is they re validate it with the pervious owner and got the same copy if purchase from them when i try to call them up they said they have submitted to the concern department for unlocking and yesterday i get an email saying they cant do it as the shop who sold in new zealand has bought it from USA and now they need the receipt from there to make it work where all legal check up was done and everything is crystal clear APPLE IS JUST HARASSING me for no reason this why people now do want to promote APPLE when a genuine case is presented to them with complete info from seller to buyer and all documents they not ready to unlock it. i highly request every one to please raise this type of concern and get this one voice to TIM COOK AND HIS TEAMthat why genuine person are being left behind where the same icloud can be unlocked by paying to hackers who help people like us to trust them more then APPLE.
I hope MR. TIM COOK read this and have a good look into helping genuine person who are stuck with this type of issues please.
thanks again guys for reading my sad story.
cheers
3horse

How the lock works is explained by Find My iPhone Activation Lock and Find My iPhone Activation Lock: Removing a device from a previous owner's account.
On YouTube you will find some videos helping bypassing the lock and get access to the contacts. With some luck you can contact the previous owner and force him to remove the iPhone from the devices list at icloud.com/find.

Need help with Itunes Authorization issue

I've been a Itunes/Ipod user for a couple years. During that time, I've sure spent over $500.00 on Itunes music from the Itunes store for my Ipod. My daugter and I both have Ipods.. There have only been 2 machines with Itunes installed here but I occasionally rebuild my computers to have the latest and greatest hardware for my business.. The other day I backed up all my music and data before rebuilding my machine due to hardware upgrades. Everything went smoothly including importing my purchased music back into Itunes.. The problem is I can't listen to it now. When I try to double click a song I get an error that says "You have already authorized 5 computers with this account. To authorize this computer you must first deauthorize one of the other computers" This isn't possible because the computers aren't around anymore to deauthorize. They were all housed (except 1, my daughters pc) in the same case as I have now.. Please respond...

The other day I backed up all my music and data before rebuilding my machine due to hardware upgrades.
okay. you may have ended up with multiple authorisations on that PC due to the system changes. if so the following documents should be of some help with techniques for freeing up authorisations:
One computer using multiple iTunes Music Store authorizations
About iTunes Store authorization and deauthorization

Seeking Help with Album Image Issues in iPod Classic

Hi folks -
I have a new 160 iPod Classic and have two album image-related issues I'd appreciate some help with.
In the case of several albums where I'd associated my own art with them in iTunes, the formatting appeared off in my iPod due to the vertical/horizontal proportions. So I corrected the images, replaced the images via iTunes, and re-synced. All of the old images were replaced - except for two. Is there any way to get my iPod to recognize the change to these two images, as it did for all the others?
Secondly, my "The Allman Brothers Band Live at Fillmore East" album was appearing twice in both the Cover Flow and Album list. That was strange, except that after the latest sync it now appears six times! It's only in one place in iTunes, and not erroneously set as a compilation or anything. This is the only album displaying this behavior...
Thanks for any suggestions or advice!
Frank
Message was edited by: frank3si

Yes my e-mail address is [email protected]
Thank you for your kind attention to my problem. I am looking for one on one brief consultation with my laptop in Cincinnati. If not then I will compose a clear question with VI.
These manuals are well known to me NI Visions Concepts ManualIMAQ Vision for LaVIEW User ManuelNI-IMAQ for USB Cameras My problem is moving to the next step of Create an array of USB imagePerform math on array Display results Sincerely,Tom Lohre cell 513-236-1704, [email protected] http://tomlohre.com/images/lafley.jpgAG Lafley, Chairman & CEO of Proctor & Gamble http://tomlohre.com/lafley.htm A.G. Lafley enjoyed hearing of Tom's painting robot and thought it played well to his new book: "The Game-Changer: How You Can Drive Revenue and Profit Growth With Innovation." http://tomlohre.com/newart.htm
Tom Lohre artist/scientist
Has a operating painting robot using RoboLab/RCX
Developing a LabView/ NXT robot that analyzes an image for aesthetic quality.

Help with chapter/marker issue, please

Similar Messages

Maybe you are looking for