Help with Chicken of the VNC and Airport

I had my airport working with Chicken of the VNC perfectly and lost the settigns. Now I cannot get it to work again. What do I do a bridge or port forwarding? And how?
There is so much contradictory information that I have just spent the whole night not doing anything of use. Any precise help would be greatly appreciated.
Thanks in advance!

The basic steps to configure for VNC are as follows:
o Configure the machine you want to control (VNC Server) to allow VNC access. If the VNC Server is behind a router, then this would entail at least three things: 1) Configure the OS X Firewall to allow VNC access, 2) Configure the router to map port 5900 to the VNC Server, and 3) Know the WAN IP address of your router. (Note: One way to get the WAN IP is to go to the web site http://whatismyip.com and make a note of the ip address.)
o Connect to your VNC Server from a VNC Client from the Internet.
And I tried to do port forwarding but it doesn't seem to work.
Let's double-check your port mapping settings.
1. Reserve a DHCP-provided IP address for the VNC Server.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the VNC Server>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <you can ignore this setting>
o Public UDP Port(s): 5900
o Public TCP Port(s): 5900
o Private IP Address: <enter the IP address of the VNC Server from the above step>
o Private UDP Port(s): 5900
o Private TCP Port(s): 5900
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

Similar Messages

Chicken of the VNC and conneting to multiple computers on a single LAN

I've successfully got Chicken of the VNC operating so that I can reach my iMac (running Leopard) from outside my LAN using my iBooks (running Tiger). And I can also connect to all computers inside my LAN by using Bonjour in chicken of the VNC.
What I cannot figure out is how to setup Chicken of the VNC and port forwarding to access my other three computers from outside of my LAN.
I suppose it is simply configuring the port forwarding correctly and apparently I'm not doing that.
I've got each Mac configured with a fixed IP as follows...
iMac is at 192.168.0.100
iBook is at 192.168.0.102
iBook2 is at 192.168.0.103
Acer is at 192.168.0.120
Right now the port forwarding on my Linksys WRT54G looks like this...
VNC1 5500 to 5500 Both 192.168.0.100 enable
VNC2 5800 to 5800 Both 192.168.0.100 enable
VNC3 5900 to 5900 Both 192.168.0.100 enable
VNC-iBook 5502 to 5502 Both 192.168.0.102 enable
VNC-iBook2 5503 to 5503 Both 192.168.0.103 enable
VNC-Acer 5504 to 5504 Both 192.168.0.120 enable
Enabling Bonjour in Chicken of the VNC lets me connect to all computers on my LAN. And I can connect to my iMac outside of my LAN using the WAN-IP:5900
But I cannot connect to any of the others except the iMac (at internal IP address 192.168.0.100 or outside IP of xx.xx.xxx.xx:5900) outside of my LAN.
Any quick tips?

If you have all of your Macs inside the LAN operating okay with remote access by CotVNC, then 3/4 of the battle is done. But first thing I would do is tunnel your VNC through an encrypted ssh tunnel, unless you don't mind the possibility of a sniffer outside your home network being able to intercept every one of your vnc packets in plain text and monitor your every vnc move.
The easy way to do it would be to connect via ssh to one of the computers inside the LAN with a bunch of ports tunneled through the encrypted ssh connection. I've got several posts that talk about tunneling vnc through ssh. Do a search on posts by me (j.v.) since last year with search terms "vnc ssh 5901". Port forward port 22 through your home router to, for example, your imac, and turn on remote login (ssh login) on your imac. You do not need 5900 port forwarded through the router, only port 22.
To access multiple computers, modify your ssh login command, that you type in Terminal on the computer outside your LAN, to add additional "-L" port forward switches, for example, "ssh -L 15900:127.0.0.1:5900 -L 15901:192.168.0.102:5900 -L 15902:192.168.0.103:5900 -L 15903:192.168.0.120:5900 [email protected] Then in CotVNC, you connect to 127.0.0.1:15900, 127.0.0.1:15901, 127.0.0.1:15902, or 127.0.0.1:15903, in order to connect to imac, ibook, ibook2, or acer. All the VNC traffic is encrypted and tunneled inside the ssh connection. All traffic to all computers is delivered to the imac's localhost interface, and depending on which port you specified in CotVNC, it goes to the computer specified in the "-L" switches for that port.

Remote desktop with Share My Desktop/Chicken of the VNC

I read on these boards of an easy and free way to access a remote Mac using Chicken of the VNC and Share My Desktop. I talked my out-of-state parents through downloading and installing SMD and I installed CotVNC; my parents start SMD and they give me their IP, port and password info. I plug everything into VNC on my end, and I can't connect. Nothing I'm doing seems to work but from everything I've read, it should connect. Am I missing something- is there a setting that has to be tweaked for this to work? We're both running 10.4.11.
Help!

Well, I don't think robojet and robojet's mother were networking experts. A couple of my posts, like this one, that I referenced for robojet are laid out in about as much of a "cookbook directions" format as I think is humanly possible. You don't need to understand it, just follow the directions.
You're still gonna have to have both ARD turned on and VNC turned on in your folks' Sys Prefs Sharing whether you, on your end, tunnel through secure shell or not. The difference is whether you want to expose those ports on your folks' machine to the internet at large or not. If they don't have a router/firewall built into their DSL modem, the ports for whatever services you have enabled will be exposed, whether you tunnel through ssh or not.
I haven't looked at the SMD product to see whether it enables ARD and VNC or not. Could be if it wasn't run from an admin account, it didn't do what it was supposed to do on your folks' end because of permissions issues.
If you insist on running your folks unsecured, make sure they know how to lock down their firewall in their router that they should buy and install (or in their DSL modem if it has that functionality built into it already) when you are done VNCing, or they may have unwanted "visitors" like ibexcom did. They probably wouldn't be too happy with you if personal identity and/or financial information were stolen or their ISP accused them of staging DDOS attacks or of spamming, all because an unauthorized "visitor" gained access to their computer via an unprotected VNC link with weak VNC password.
Since you plan, at least initially, to get this up and running unprotected directly over the VNC ports, launch /Applications/Utilities/Network Utility and go to the port scan panel and scan their ISP-given IP address from port 5900 to 5903 and see if any of them are open. If the ports are not showing up as open, then you won't be able to connect. They can determine their ISP-given IP address here.
IF it were convenient for you to go to their place with a laptop and affiliate wirelessly onto their home network (like, with the $50 router that you buy them ), that would be a good start for doing baby steps to overcome the entry-level connection problems. Then make it work through ssh from there, then try it secure from your place.
Good luck!

Cannot remotely access mac mini via Chicken of the VNC post recent updates

Hi, updated my remote mac mini A running OS X 10.4 with QuickTime 7.5 for Tiger and AirPort Utility 5.3.2 Tiger yesterday. I can connect from my mac mini B via ssh into the mac mini A, but for some reason Chicken of the VNC will not work (it was working prior to the updates). I get the following message "channel 3: open failed: connect failed: Connection refused" in the command window when I try to get access to the computer via Chicken of the VNC and Chicken of the VNC itself tells me that the connection is refused.
Any suggestions? How can I remove the AirPort Utility 5.3.2 Tiger which I assume is the culprit? Thanks
(mac mini A is miles away, the only access I have is via the command window)

Welcome to the forums, and thanks for the tip!

Chicken of the VNC connection help needed

Hello! I am not sure this is the right forum to post but it didn't seem to fit anywhere else. I have Airport Extreme v. 5.6 and am trying to connect to Chicken of the VNC. No luck. I selected the ARD settings in my system preferences, opened the firewall (which I don't like to do, wish there was a more secure way to control a client computer) and set up my connection on port 5900 in the airport admin utility. I have noticed that the IP my widget gives me is different than the one the base station reads. Help is appreciated Thanks

Hi Taryn,
Thanks for your quick and helpful reply. It is a bit
advanced for me at this point to comprehend, so if
you could simplify a bit for the remote connection
newbie that would be great, thanks so much :o)
That was the relatively simplistic explanation!
In order to remotely connect, the VNC client (you) needs to know the IP address of the VNC server (the remote computer you wish to connect to).
Every computer connected to the internet has an IP address, such as 200.100.54.14.
Some people have a fixed IP address, most though will be assigned an IP address by their ISP and this will generally change as and when they connect at different times.
However some people like to connect their networks to the internet which means that the network needs to share the single IP address connected to the internet.
This is usually done by a router, the router connects to the internet and this router has the external IP address. The router then using NAT to share the single IP address with multiple computers on the internal network (a subnet or LAN (local area network)).
What this means is that a computer on the LAN will have an internal IP address, this maybe fixed.
So when you send a remote connection request to the remote network, the router needs to know which computer on the LAN you are trying to connect to. You need to map the traffic coming in to the router to the specific machines you are trying to connect to.
This means that the remote router needs to be configured before you can remotely connect to a computer on the remote LAN.
I did just find out that I have been attempting to
connect with a laptop that has an every changing IP
(according to the client),
You (well he) could use a service such as Dynamic DNS to solve this issue.
http://www.dyndns.com/services/dns/dyndns/
but he is going to see
about transferring his work to his home computer that
has a fixed IP address. Does that sound more doable?
Depends on whether he has a router (see above)
Finally, do you think the pay services like ARD or
Timbuktu are perhaps safer? We like COTVNC because it
is free but I am very worried about the
confidentiality of my data.
COTVNC is according to the documentation secure.
Have a look at this guide as well.
http://guides.macrumors.com/RemotelyControlling_anotherMac

HT1937 I've set a factory job and now I can not remember my mail and I could not activate the phone ..alrjae help me re- activate the phone and this zip to communicate with me *****

I've set a factory job and now I can not remember my mail and I could not activate the phone ..alrjae help me re- activate the phone and this zip to communicate with me ******
<Email Edited by Host>

Contact that someone else to have them delete their account.
The previous owner needs to do this:
Prepare your device to sell or give away
There is no workaround for Activation Lock.
iCloud: Find My iPhone Activation Lock in iOS 7 & later
http://support.apple.com/kb/HT5818?viewlocale=en_US&locale=en_US
http://support.apple.com/kb/TS4515

Is the Time Capsule wi-fi router compatible with the Nest thermostat? I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?

I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?
If so, i already have a wi-fi router, so can the Time Capsule simply be used for wireless backup instead of as a router if there is conflict?

A TC is fundamentally a AE with a sata chip included to drive the hard disk. Some slightly different bios to include disk functions, although most of those are also on the AE. So as a router it is 99.999% identical.
And yes, if you have another router you can easily bridge the TC and use wireless for backups and internet connection. Once you no longer route through the TC the issues with most NAT problems including port forwarding should disappear.. mostly this is due to all apple routers using NAT-PMP instead of upnp which is the near universal standard for opening ports.. without upnp apple keep their routers more exclusive.

Is there a way to have a Chicken of the vnc type GUI over internet in ARD3?

Hello, to whoever reads this question, thanks in advance if you can help.
My need is this. I regularly use Chicken of the VNC for multiple administration over the internet, but what I like is the possibility to have same IP but Multiple clients with fixed IP (local) behind Firewall, i.e. x.x.x.x:5910 x.x.x.x:5920, x.x.x.x:5930, etc. and i can connect at the same time to the different machines to admin them.
Question: Is there any possibility to have the multiple connections with ARD 3 or even ARD 2 over the internet with same IP?
At one point ARD 3 did work for me like that for about an hour and then it stopped, blocking out 2 of 3 machines in the same IP. I mean, it acutally let me have 2 windows open on the same IP with different ports over internet and was flabbergasted, but then it stopped! when I quitted and restarted, I could do it no more…
I really like ARD, but if I got to manually change the port everytime I log in… yikes…!! I admin 20 machines in 10 different locations, so everytime i gotta log in to machine 'a' then change ports to machine 'b' for 10 locations everyday… well I hope you get the idea.
BTW i tried looking all over the forum, but could not find this info specifically.
PS thank you for your time

I, too, was a bit bummed out by the lack of this feature. I wondered if ARD 3 had some sort of mode Apple themselves used "silently".
There IS a way to make it work, however -- via VPN. I discovered that once I used VPN into my company's intranet, ARD 3's scanner could see EVERY Mac in the company.
Setting up a VPN nowadays is pretty simple -- many routers handle the support for you. OS X's Internet Connect feature makes it trivial to connect to the VPN, once it is properly set up from the inside of the company.

Multiple Users in Chicken of the VNC

Can control only one user in Chicken of the VNC. When I sign into my wife's account I can't control the screen. I am using a iBook G4 1.33 GHz to control my G4 450 GHz tower running 10.3.9. I have OSXvnc 1.61 installed. I just upgraded to COTVNC 2.0b3 because 2.0b2 just stopped working. I have my wife's account with full privileges in sharing under the system prefs. Any help is appreciated

If you have all of your Macs inside the LAN operating okay with remote access by CotVNC, then 3/4 of the battle is done. But first thing I would do is tunnel your VNC through an encrypted ssh tunnel, unless you don't mind the possibility of a sniffer outside your home network being able to intercept every one of your vnc packets in plain text and monitor your every vnc move.
The easy way to do it would be to connect via ssh to one of the computers inside the LAN with a bunch of ports tunneled through the encrypted ssh connection. I've got several posts that talk about tunneling vnc through ssh. Do a search on posts by me (j.v.) since last year with search terms "vnc ssh 5901". Port forward port 22 through your home router to, for example, your imac, and turn on remote login (ssh login) on your imac. You do not need 5900 port forwarded through the router, only port 22.
To access multiple computers, modify your ssh login command, that you type in Terminal on the computer outside your LAN, to add additional "-L" port forward switches, for example, "ssh -L 15900:127.0.0.1:5900 -L 15901:192.168.0.102:5900 -L 15902:192.168.0.103:5900 -L 15903:192.168.0.120:5900 [email protected] Then in CotVNC, you connect to 127.0.0.1:15900, 127.0.0.1:15901, 127.0.0.1:15902, or 127.0.0.1:15903, in order to connect to imac, ibook, ibook2, or acer. All the VNC traffic is encrypted and tunneled inside the ssh connection. All traffic to all computers is delivered to the imac's localhost interface, and depending on which port you specified in CotVNC, it goes to the computer specified in the "-L" switches for that port.

Help with if statement in cursor and for loop to get output

I have the following cursor and and want to use if else statement to get the output. The cursor is working fine. What i need help with is how to use and if else statement to only get the folderrsn that have not been updated in the last 30 days. If you look at the talbe below my select statement is showing folderrs 291631 was updated only 4 days ago and folderrsn 322160 was also updated 4 days ago.
I do not want these two to appear in my result set. So i need to use if else so that my result only shows all folderrsn that havenot been updated in the last 30 days.
Here is my cursor:
/*Cursor for Email procedure. It is working Shows userid and the string
You need to update these folders*/
DECLARE
a_user varchar2(200) := null;
v_assigneduser varchar2(20);
v_folderrsn varchar2(200);
v_emailaddress varchar2(60);
v_subject varchar2(200);
Cursor c IS
SELECT assigneduser, vu.emailaddress, f.folderrsn, trunc(f.indate) AS "IN DATE",
MAX (trunc(fpa.attemptdate)) AS "LAST UPDATE",
trunc(sysdate) - MAX (trunc(fpa.attemptdate)) AS "DAYS PAST"
--MAX (TRUNC (fpa.attemptdate)) - TRUNC (f.indate) AS "NUMBER OF DAYS"
FROM folder f, folderprocess fp, validuser vu, folderprocessattempt fpa
WHERE f.foldertype = 'HJ'
AND f.statuscode NOT IN (20, 40)
AND f.folderrsn = fp.folderrsn
AND fp.processrsn = fpa.processrsn
AND vu.userid = fp.assigneduser
AND vu.statuscode = 1
GROUP BY assigneduser, vu.emailaddress, f.folderrsn, f.indate
ORDER BY fp.assigneduser;
BEGIN
FOR c1 IN c LOOP
IF (c1.assigneduser = v_assigneduser) THEN
dbms_output.put_line(' ' || c1.folderrsn);
else
dbms_output.put(c1.assigneduser ||': ' || 'Overdue Folders:You need to update these folders: Folderrsn: '||c1.folderrsn);
END IF;
a_user := c1.assigneduser;
v_assigneduser := c1.assigneduser;
v_folderrsn := c1.folderrsn;
v_emailaddress := c1.emailaddress;
v_subject := 'Subject: Project for';
END LOOP;
END;
The reason I have included the folowing table is that I want you to see the output from the select statement. that way you can help me do the if statement in the above cursor so that the result will look like this:
emailaddress
Subject: 'Project for ' || V_email || 'not updated in the last 30 days'
v_folderrsn
v_folderrsn
etc
[email protected]......
Subject: 'Project for: ' Jim...'not updated in the last 30 days'
284087
292709
[email protected].....
Subject: 'Project for: ' Kim...'not updated in the last 30 days'
185083
190121
190132
190133
190159
190237
284109
286647
294631
322922
[email protected]....
Subject: 'Project for: Joe...'not updated in the last 30 days'
183332
183336
[email protected]......
Subject: 'Project for: Sam...'not updated in the last 30 days'
183876
183877
183879
183880
183881
183882
183883
183884
183886
183887
183888
This table is to shwo you the select statement output. I want to eliminnate the two days that that are less than 30 days since the last update in the last column.
Assigneduser....Email.........Folderrsn...........indate.............maxattemptdate...days past since last update
JIM.........      jim@ aol.com.... 284087.............     9/28/2006.......10/5/2006...........690
JIM.........      jim@ aol.com.... 292709.............     3/20/2007.......3/28/2007............516
KIM.........      kim@ aol.com.... 185083.............     8/31/2004.......2/9/2006.............     928
KIM...........kim@ aol.com.... 190121.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190132.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190133.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190159.............     2/13/2006.......2/14/2006............923
KIM...........kim@ aol.com.... 190237.............     2/23/2006.......2/23/2006............914
KIM...........kim@ aol.com.... 284109.............     9/28/2006.......9/28/2006............697
KIM...........kim@ aol.com.... 286647.............     11/7/2006.......12/5/2006............629
KIM...........kim@ aol.com.... 294631.............     4/2/2007.........3/4/2008.............174
KIM...........kim@ aol.com.... 322922.............     7/29/2008.......7/29/2008............27
JOE...........joe@ aol.com.... 183332.............     1/28/2004.......4/23/2004............1585
JOE...........joe@ aol.com.... 183336.............     1/28/2004.......3/9/2004.............1630
SAM...........sam@ aol.com....183876.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183877.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183879.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183880.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183881.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183882.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183883.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183884.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183886.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183887.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183888.............3/5/2004.........3/8/2004............     1631
PAT...........pat@ aol.com.....291630.............2/23/2007.......7/8/2008............     48
PAT...........pat@ aol.com.....313990.............2/27/2008.......7/28/2008............28
NED...........ned@ aol.com.....190681.............4/4/2006........8/10/2006............746
NED...........ned@ aol.com......95467.............6/14/2006.......11/6/2006............658
NED...........ned@ aol.com......286688.............11/8/2006.......10/3/2007............327
NED...........ned@ aol.com.....291631.............2/23/2007.......8/21/2008............4
NED...........ned@ aol.com.....292111.............3/7/2007.........2/26/2008............181
NED...........ned@ aol.com.....292410.............3/15/2007.......7/22/2008............34
NED...........ned@ aol.com.....299410.............6/27/2007.......2/27/2008............180
NED...........ned@ aol.com.....303790.............9/19/2007.......9/19/2007............341
NED...........ned@ aol.com.....304268.............9/24/2007.......3/3/2008............     175
NED...........ned@ aol.com.....308228.............12/6/2007.......12/6/2007............263
NED...........ned@ aol.com.....316689.............3/19/2008.......3/19/2008............159
NED...........ned@ aol.com.....316789.............3/20/2008.......3/20/2008............158
NED...........ned@ aol.com.....317528.............3/25/2008.......3/25/2008............153
NED...........ned@ aol.com.....321476.............6/4/2008.........6/17/2008............69
NED...........ned@ aol.com.....322160.............7/3/2008.........8/21/2008............4
MOE...........moe@ aol.com.....184169.............4/5/2004.......12/5/2006............629
[email protected]/27/2004.......3/8/2004............1631
How do I incorporate a if else statement in the above cursor so the two days less than 30 days since last update are not returned. I do not want to send email if the project have been updated within the last 30 days.
Edited by: user4653174 on Aug 25, 2008 2:40 PM

analytical functions: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/functions2a.htm#81409
CASE
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/02_funds.htm#36899
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/04_struc.htm#5997
Incorporating either of these into your query should assist you in returning the desired results.

TS1627 iCal on my MacBook Pro won't sync with iCal on the iPhone and visa versa

Just got a new iPhone 5 and now iCal on my MacBook Pro won't sync with iCal on the iPhone and visa versa

Hi Jetjuice!
I have an article that can help you troubleshoot this issue a little further and can provide you with some more steps to take in attempting to resolve this issue:
Sync Services: Advanced troubleshooting for contact and calendar syncing
http://support.apple.com/kb/ts2481
That article has an extensive list of steps to perform in attempting to get the calendar to sync again, and those steps should help you resolve the issue. Thanks for using the Apple Support Communities!
Cheers,
Braden

Need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook.......

need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook? removal of cmos, resetting laptop, using cccleaner, windows password recovery and hiren's was noneffective, any help is appreciated. thanks

Hi,
As your notebook is a business class machine, security is more stringent - the password is stored in non-volatile memory and there are no 'backdoor' passwords. Your best option would be to contact HP regarding this.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Can anyone help with issue whereby Music, Podcasts and Audiable Book Apps keep stopping when listing via Headphones following IOS 7.01 Updates on Iphone 4?

Can anyone help with issue whereby Music, Podcasts and Audiable Book Apps keep stopping when listing via Headphones following IOS 7.06 Updates on Iphone 4?
I have tried the following all ready:
Resetting Phone
Resetting Settings on phone
Change Headsets to speakers
Reinstalled Phone
Updated to IOS 7.1
No of the above has resolved the issue does anyone have any ideas?

Can anyone help with issue whereby Music, Podcasts and Audiable Book Apps keep stopping when listing via Headphones following IOS 7.06 Updates on Iphone 4?
I have tried the following all ready:
Resetting Phone
Resetting Settings on phone
Change Headsets to speakers
Reinstalled Phone
Updated to IOS 7.1
No of the above has resolved the issue does anyone have any ideas?

I'm using mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts- I didn't have any problems with it before the upgrade and in safari I don't have this problem.

Hello, I'm using Mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts… I didn't have any problems with it before the upgrade and in safari I have no problem with it. please help me- I don't like to use safari a my browser...

elly903 wrote:
Before commenting - I CANNOT install Mavericks because it'll mess up the versions of Filemaker Pro and Quicken that I use regularly...
Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) for $15:
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
It will input your Quicken PPC data file directly if it was Quicken 2005 through 2007. If older you need Quicken 2006 or 2007 PPC first to convert your data file; and this update must be done BEFORE you upgrade to Mavericks:
http://quicken.intuit.com/support/help/patching/quicken-2006-manual-updates--mac -/GEN82200.html
Filemaker Pro PPC (in this case 7) running in Snow Leopard Server installed into Parallels for use in Lion, Mt. Lion and Mavericks:
[click on image to enlarge]
Snow Leopard Server: 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only)
This solution allows you to run your Photoshop Elements in Mavericks concurrently with Filemaker Pro PPC. Mavericks is a free download.

HT5622 Please help I've lost the question and answer confidential My Account

Please help I've lost the question and answer confidential My Account

Hi Saad al saad,
If you are having an issue with the Security Questions for your Apple ID, you may find the following articles helpful:
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
Apple Support: Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
Regards,
- Brenden

Help with Chicken of the VNC and Airport

Similar Messages

Maybe you are looking for