Help with choosing the right lenovo laptop model

Hello All,
I am in the process of replacing my old Lenovo w520 with one of these laptop models :-
i) Lenovo T440
ii) Lenovo X1 Carbon
iii) Lenovo W540
Which one of the above 3 models is the best ? What are the known problems with any of these models?
My primary requirement is to have higher data storage capacity , Good processing power and a good sound card.
Let me know which of the models is the best .
Regards,
Vir

Go20 wrote:
Thank you for your advise but how can I get very good quality on DVD then.
as long as your project is <60min, iDVD will create best quality technically possible (=using the highest bit-rate, 9MBit/s) standards allow .
it is not a prob of the tool, but the standards. your source is 1920x1080, a DVD can contain only 720x480 ..
if you want 'higher' delivery-quality, consider BluRay (hmmm?) or a MediaPlayer (AppleTV, WD TV, PS3, .. )

Similar Messages

Help with choosing the right specifications for a Macbook Pro Retina?

Opinions needed....
So I'm new to Macs, but I know what I want to achieve and I feel this is the right route to choose. I'm looking at delving into the world of music production, using Logic pro 9 and garageband, but I also enjoy watching High definition Movies and televison so I know that the Retina display is definatley the right choice for me. However, I'm unsure on the amount of RAM & Which processer I should choose. I have read a fair bit on forums and online about the new retina macbooks being 'locked' from upgrading, so the 16GB of RAM is an immediate choice for logetivity.
The choice of processor is when I start to become clouded in my choice. As forementioned, I'm looking at running logic pro, as well as high def movies. There is also a possibilty at looking into photo and video editing, Whether that be in final cut pro or photoshop... But I want to leave my options open.
I think the choice of 16GB of RAM, 2.6Ghz processor, with a 256GB hard drive ( as i have 1.5TB external space) would be a good choice. Once I've added on applecare that comes out at around £2350, Which is a significant investment, but one that I think will help me immensely for the future. I am interested in other peoples opinions on my possible choice because, as I said before, I'm new to the world of Macs and making the right choice is essential. As a side note, the choice of upgrades also ensures a reasonable resale value, which is a bonus.
Regards

Both power adapter I have are different (at the magnet end) from the one in link.
Earlier adapters have T shaped connectors, which Apple later changed to the L shape, presumably to make them more abuse-proof. Either one is fine and the one you are using will not damage your Mac.
Retina MBPs and new MBAs use a completely different MagSafe 2 connector which will not fit (without an adapter).

Help with choosing the right hardware

Hello,
I would like to know what hardware sollutions from NI are best suited for my Master's degree project, which is a motorized crane for a video camera (basically a robotic arm with 5 axes). What I need is something to control my 5 motors (DC/stepper) - both in position and velocity and also need some Digital inputs available for different sensors. In my previous project, I have succesfully built a motorized slider for camera (only 3 axes - 2 rcservo for pan/tilt and a DC motor for translation which was controlled in position) and I used Arduino development board to control it, encountering difficulties for controlling my entire system. In this upgraded version of the crane, I thought that NI hardware are more reliable, and I want to find something to match my application requirements. I just need something to control my motors using Labview, as I will make my own drivers for them (also something affordable for a student as the motion control modules are way out my bugdet).
On the other hand, I would also like to control my system from a smartphone and I was wondering why Labview has implemented applications for Android and Apple, but not Windows Phone? Are there policy issues or just not yet implemented? If not, I would gladly develop an application for WindowsPhone8, as it would help me remotly control my crane.
Thank you in advance,
Catalin Ionita
"Politehnica" University of Bucharest

Hello Catalin,
There are a few options that are available for this application, I'll start with the simplest hardware with the most difficult software and then progress from there.
The simplest implementation that I can think of would be a high channel count digital I/O device, where you power a custom H-Bridge or similar motor driving circuit. Based on a 6 or 4 pole stepper motor this would translate to 20-30 digital channels. Something as small as a NI USB-6504 (24-ch, 8.5mA) would work with very low performance. This implementation would only have software timed digital output with a significant amount of jitter and variability, as well as the 8.5mA max current drive per channel which would require extremely high input impedance on the drive circuit.
The next step up in implementation would be a digital I/O device with Hardware timing such as a NI PCIe-6321 or a NI PCIe-6323. These cards will allow a buffered digital output which will significantly reduce jitter and increase the performance of this control.
Both of the above methods would require you to program the motion control for the stepper motors, and would also require an external drive for providing the power to the stepper. This could be something as simple as a custom built H-Bridge, a simple stepper motor driver such as this one available from sparkfun.com: Big Easy Driver.
The next option would be using the motion modules such as a NI 9501 or a system built by following the NI Stepper Motion System Selection Guide. This would be the most complicated hardware, however this would enable you to use the National Instruments SoftMotion Module for programming instead of writing all the code from scratch.
In regards to the implementation for LabVIEW implementation for Windows Phone, I am unsure of whether this will or will not be implemented. Please feel free to post your ideas on implementation on the NI Idea Exchange, and thanks for the feedback!
Cheers,
Joel
Motion PSE
National Instruments

Please help with choosing the right text component

Hello,
In my applet, I need a single-line text component with the following capabilities:
1: Support for bold font (entire text,not just part of it)
2: Support for underlined text (entire text,not just part of it)
3: Support for blinking text
4: Ability to put caret anywhere within the text field with mouse
5: Support for field validation
6: Ability to handle various key events and modify the text and/or move around caret position accordingly.
Now, I know there are at least 4 different text components: JTextField, JTextArea, JEditorPane, JTextPane. Which one of these is most suitable for the above features? Is it possible to use JTextField to support all of the above?

Here is a link to the Java Swing tutorial which discusses the text components.
http://java.sun.com/docs/books/tutorial/uiswing/components/text.html
I think you need to use a JEditorPane or a JTextPane (although I'm not sure any of the components support blinking text). A demo program shows some of the capabilities of these components:
http://java.sun.com/docs/books/tutorial/uiswing/components/generaltext.html

Help me choose the right workstation

Hello,
After 5 years of using Dell products for my company, I am currently investigating to switch to Lenovo computers.
Can you help me to choose the right workstation please ?
Usage: webdesign and webdevelopment
Expectations:
8go RAM
1ssd 120go for os (can be purchased apart)
2 sata 500 go 7200 raid 1 for data
2 displays connected through dvi (no 3d acceleration needed but good 2d on two displays minimum with large resolution). Possibility to add a third monitor ?
product available in france
price around 1000/1500 euros
I thought E30 was a good choice but :
can I add a ssd disk in the second 5"1/4 media bay ?
can I boot on this disk ?
can I Still use Raid 1 sata disks ?
can I choose a video card with 3connections for monitors ?
Many thanks for your answers.
Best regards.
Lenovo X220 4287-CTO / Intel Core i7 2640M @ 2.8 / Corsair Vengeance 16 Go@1866 MHz CL10 / Samsung SSD 840 PRO 512 Go / Bios 1.38 / Linux Xubuntu 14.04LTS / eGPU ATI Radeon 5870 Eyefinity 6 / 2x DELL U2142M / 2x DELL U2212HM
Solved!
Go to Solution.

Many thanks for your answers,
About storage, can E and S series handle RAID 1 of SAS disks ?
I have two Cheetah SAS 300go 15K RPM, and I would like to use them in this workstation.
And, are you sure that S series are available for customization in France, the website displays nothing on the S20 page: http://shop.lenovo.com/SEUILibrary/controller/e/frweb/LenovoPortal/fr_FR/catalog.workflow:category.d...
Best regards,
Lenovo X220 4287-CTO / Intel Core i7 2640M @ 2.8 / Corsair Vengeance 16 Go@1866 MHz CL10 / Samsung SSD 840 PRO 512 Go / Bios 1.38 / Linux Xubuntu 14.04LTS / eGPU ATI Radeon 5870 Eyefinity 6 / 2x DELL U2142M / 2x DELL U2212HM

Help With Choosing The Technology

Hello,
I need help in choosing the appropriate technology for the application that I'm going to be creating.
The characteristics of the system that have been decided until now:
Standalone app built on either Flex/Flash/AIR
Restricted to using the system on a single computer, hence can be a tightly coupled system
The server component of the system needs to be closed source and robust, for which im thinking something like a Java backend,etc,etc.
In a completely new environment, all that i need to be able to do is install just the AIR application and not worry about installing extra stuff for the server support.
Thanks In Advance for anyone who can help me out with this.

If you are saying you want the server component to be on the same machine as the Flex app, then your choices are severely limited due to the sandbox, unless of course you are using AIR, then you can just use the SQLite database.
But if there will be a sevrer component on another machine on the web, you could use BlazeDS, and like I said, its free and very robust.
http://opensource.adobe.com/wiki/display/blazeds/download+blazeds+3
http://learn.adobe.com/wiki/display/Flex/Creating+a+BlazeDS+web+service+application+in+Fle x+Builder
http://learn.adobe.com/wiki/display/Flex/Creating+a+BlazeDS+messaging+application+in+Flex+ Builder
http://sebastien-arbogast.com/2008/04/10/flex-spring-and-blazeds-the-full-stack/
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com
Flex / AIR Development, Training, and Support Services

Help me choose the right module

Hello Sir/Madame
I have done MCA from india and i am going to learn SAP ABAP
I am confused which module should i go
ABAP+BASIS
or ABAP+ any functional module like HANA,FICO,MM,SM,XI,?
Help me choose and study the right module which can open multiple doors for me to get a job
and adds something extra to my profile as comparison to other students learning SAP

Hi Harmanpreet,
I recommend you a ABAP certification first that will open more opportunities.
Regards,
Abdullah

Help with buying the right MacBookPRO.

I have an old 2006 Ca vintage powerbook. It works after a few repairs but I cannot update. So I will have to now buy a new one.
I have many questions, but the main one is about solid state hard drive.
Two questions:
1/ Limited write cycle? What does that mean in terms of solid state? After some time does one have to change the solid state drive, even though it still partially works?
2/ Solid states don't get affected by magnets, but what about these new stronger X-rays machines in airports, .. . or even Light? I fly every two months and those new X-ray machines are very strong.
I am a creative type with low income, so I want the macbook pro to last more than 3 years. I have a large archive in London and many scans etc, so I also cannot afford to lose any info either. --Having already lost thousands of Emails more than once in Apple's mail!
The bigger the storage the better, too!
I was told that the new retina screen is more fragile, and also as great as it looks, doesn't print with the same colors. I dabble in graphics but don't print that much, plus I work on photos and video, and I wheel my laptop in a Tumi case at the airports.
Which MacBookPro would you suggest?
I would really appreciate some advice on which of the new ones to get. Solid state without retina or with retina screen? No Solid State and an inbuilt drive? I often have slow broad band, so I still like to store the many files on hard drives and in the laptop.
Prima

Go with the non-Retina 15 Inch.....The Retina Macbook Pro is quite expensive and there is no update available at the moment from Adobe and Microsoft to support the Retina Screen.
With the Retina Macbook - you can not upgrade your RAM in the future should you need more - since it's soldered in the logicboard - the flash storage is upgradeable but not worth it's price right now.
With the non-Retina Macbook Pro - you can upgrade the RAM yourself and if you think you're running out of storage space - the hard drive is also easily upgradeable.
if i were in your shoes - i would get the base 15 Inch Macbook Pro - add the antiglare Hi-Res screen if you need it and do the RAM upgrade to 16GB - That's what I did to my 15 inch Macbook Pro.
with regards to your SSD question/concerns:
SSD Endurance
3K P/E Cycles
5K P/E Cycles
10K P/E Cycles
30K P/E Cycles
NAND Capacity
100GB
100GB
100GB
100GB
Writes per day
10GB
10GB
10GB
10GB
Write Amplification
10x
10x
10x
10x
P/E Cycles per Day
1
1
1
1
Total Estimated Lifespan
8.219 years
13.698 years
27.397 years
82.191 years

Making a website to help with choosing the colour of a bike - please help me :D

Hello I am trying to make a website where you can take
conponents of a bike and change their colour
there are about 17 conponents that I want to be able to
change the colour of e.g. frame colour and seat colour.
and I want to have 10 - 20 colours
the number of combinations would be huge, so to have that
many pictures, with a link to each is probs not the best solution
by far.
I was planning on having a more interaction site, where when
a colour or conponent is selected, it changes in front of you - any
ideas how I could do this?
prehaps a simple solution would be to have a range of
buttons, that when selected display a different coloured conponent
- how do I make a button that when pressed reveals say a coloured
box and doesnt dissapear when the mouse is moved away from the
button - is this the hit feature? if so how do I make it work!?
Any help would be fantastic
Simon

Simon :
The best way you can do it, is firs, to prepare several
colors of the same bike : you achieve this changing the
Hue/Saturation properties in photoshop, so you are going to create,
as an example, 7 different colors (the main colors) you have in
stock.
Then you create independent Movieclips for each one, this
won't load too much your memory since you can make independent
SWF's which are going to be called on pressing the "color button"
using the "LoadMovie" actionscript property. Remember, when you
create the button, you just create small squares orange, blue, red,
yellow, green, etc etc.. so when you click on them, the color they
show is the color that will call the bike.
You have a good example here on using LoadMovie, there are
even more googling around :
http://www.cristalab.com/tutoriales/152/galeria-de-imagenes-en-flash-con-loadmovie.html
P.D.: There is another way, to try to apply colors with
Actionscript, but forget about it, because since the bike pictures
have shadows and shiny parts, this "filling color" way is not going
to fit well. I justed wanted to mention this, I wouldn't try this
way...

Help with choosing the correct adapter

Hi, could anyone help please.
I have a 20inch Cinema display that I would like to connect to an imac at work. Am i correct in thinking that all I need is the mini DVI to DVI adapter. I'm a little confused.
Thanks
John

Click here, find the page for your iMac model, and then hook it up to an ADC or DVI port depending on what the display has.
(47570)

Help on choosing the right Bluetooth Device

This isn't troubleshooting, but I really am in a stuck of which bluetooth headset I should get after looking at many options. I need help deciding which bluetooth headset to get that will be a perfect match for both my new iPhone (3G) and 80GB PS3. I've looked into the Jabra BT5010, Plantronics' Voyager 815, 520, 855, and Discovery 665 as well, which is absolutely genius (short from its rubbish 3.5 hour battery life for the former mentioned Plantronics device). I think I've narrowed it down to those two (BT5010 and 665), but I am open to new recommendations if you lot have any. I partly don't know what I am talking about because all this is new with me even the ps3 and iphone, which will come 11 July. Here are my thoughts:
Multipoint, good voice/sound quality, and battery life are the three key factors in decision making for me, but with the 665 I will make a battery life an exception, since it is sacrificed for superior sound quality (also without MP). Furthermore, is Multipoint really necessary between a PS3 and iPhone? I didn't think it was vital but just a leisure feature. The BT5010 has 10 hours of battery life along with multipoint I believe and fair quality so I plan on going with that one for compatibility reasons for the PS3. Please advise. Cheers!
P.S. If I had the money I'd by the 665 for my iPhone (I don't talk THAT much) and the BT5010 for the PS3. Also, I looked at Aliph's Jawbone, is that any good for what it's worth?

Re: New LGG4 Video showing the Capabilities of the Phones Camera and other features
LG G4 announced

Help me choose the right black for a background (white text on black BG)!

Hi all!
I am polishing an InDesign document for a magazine. The cover will contain a big black surface with white texts on top (alongside a white surface with black texts/graphics on top and there is also a color bar on top of the black surface.)
I was warned that standard black will not work for the black background and I was advised to produce a 'cyan black' or a '4 colour black' instead.
The cover of the magazine will most likely be like a book cover: fairly thick white cardboard/paper with a coated job.
What exact color choice would you recommend knowing that the text color will be 'paper white'.
I now have this Pantone Black C (from the Pantone solid coated library): would it be good for this job? And what about the other black text and graphic elements on the white surface? Should they be from the same black?
I was hoping for the most straight forward and saff answere to this question as soon as possible.
THANKS IN ADVANCE!
Best.
Nic

I agree with Bob.
Generally, I do ask the printer. But usually I set up a rich black with 50% cyan and 100% black.
Adding more than Cyan to the Black can cause misregisteration issues, usually I stick to a 2 colour build for the Rich Black when knocking out White Text.
If your printer suggests differently then use what they have asked.
A few general rules of thumb:
Don't use thin serif fonts below 10pt - as the serifs have a chance of filling in.
Use a slightly bolder version of the font if one is available.
Increase the kerning slightly.
Point size and and typeface is key to setting reversed out type. A font with thick hairlines will not break up as easily as one with thin hairlines. Italics tend to be problematic as in they can break up more easily than roman faces. Increasing the kerning here is vital as it prevents letters from joining up unintentionally.
When talking with the printers - let them know what type size and what font you're planning to use and if it will cause any issues with the print quality.

How to choose the right Mac Pro Specs?

Hello all,
Below is a question I posted in May along with someone's response. I'm wondering if I should still go with the response I received considering the new release of the mac pro 12 core. Did anything change that I need to note in my purchase or is the below response suitable? THANKS!!!!!
my question:
I need some help in choosing the right specs for my mac pro. I am looking for a computer that will help me in running my small business and keep my art portfolio organized. I'll probably be running several programs at a time (ex. mozilla, itunes, adobe bridge, dreamweaver, illustrator, and photoshop). More specifics below
What i'll be using it for:
building a few websites
managing my small business
large photo file editing
keeping business files, artist receipts, etc
cataloging my art portfolio (large photo files)
storing photos, music, and short videos
graphic design
infrequent film editing
infrequent sound editing
what programs i'll be using:
CS5 (mostly photoshop, illustrator, bridge, dreamweaver)
iphoto
itunes
maybe minimal finalcut/soundtrack pro
maybe minimal aftereffects
Advice?
My concerns are that it needs to run pretty smoothly with multiple programs open, no overheating, plenty of space for file storage and application support.
Hello washleyill,
My advice would be to buy the standard configuration 2.66GHz Quad Core (i.e. 3 x 1GB RAM, 640GB hard drive) from the Apple store, with the exception of the graphics card which you can buy as a CTO option for $200.00. It is well worth the upgrade from the GT120 - I know, because I upgraded myself last November after using a GT120 for 4 months.
With regard to the memory, if you can afford it now, buy 4 x 4GB from OWC now. If not, I would suggest that you buy 2 x 4GB now, and then add another 2 x 4GB in the future. 16GB of RAM is a much better option than 8GB for your requirements. You can sell the 3 x 1GB RAM to OWC in "part exchange", and there would be little difference in price for 2 x 4GB to the CTO option of 4 x 2GB.
http://eshop.macsales.com/shop/memory/Mac-Pro-Memory#1066-memory
Instead of buying 2 x 1TB hard drives as a CTO option, you could purchase 2 x 1.5TB or 2 x 2TB HDDs for less money, and you would still have the 640GB. Spare drives are always useful. I use my original 640GB as a spare emergency system boot drive (OS and applications) in an external enclosure.
Another alternative is to wait a few more weeks, in case the rumours of the introduction of a new Mac Pro range in June have any foundation.
Regards,
Bill

Hello again washleyill,
The defining factor, which you haven't mentioned in either this or your original question, is what your overall budget is.
With the introduction of the new models, it's a new ball game now since I replied to your original question.
Now, if it is within your budget, I would recommend the 2010 Mac Pro 3.33GHz 6-Core "Westmere", with the standard 1TB hard drive, the basic 3 x 1GB RAM, but with the CTO Radeon HD5870 1GB Graphics Card.
This is the same configuration that Lloyd Chambers (of Mac Performance Guide fame) has recently ordered:
http://macperformanceguide.com/index.html
Then buy as much memory as you can afford now from OWC (trade-in the 3 x 1GB of Apple RAM against this):
http://eshop.macsales.com/shop/memory/Mac-Pro-Memory#1066-memory
(The 1333MHz is now listed on this page as well as the 1066MHZ)
If your budget is large enough, then certainly it is worth considering the 2.93Ghz 12-Core, but the 3.33GHz 6-Core, with maxed out memory and fast hard drives, should be more than adequate for your requirements. The more memory the better for Photoshop CS5!
I have just ordered Photoshop CS5 myself. It is a big step-up from Elements 8, and I was going to wait until next year, by which time, hopefully, any initial problems and bugs should have been resolved.
However, Adobe UK made me an offer I couldn't refuse! The full boxed Photoshop CS5 edition for half price!
Also, the offer included an option to buy Lightroom3 at the same time with a 30% discount off its normal price, and so I have taken the plunge and ordered that as well, because I have never been completely happy with Aperture (II or III). Normally, I would not have purchased both Photoshop CS5 and Lightroom 3, but at these prices the offer was too tempting.
Best of luck with your purchase,
Regards,
Bill

Need help with choosing a PSU

hey guys,
i need some help with choosing a right PSU for my gaming rig. i plan on doing some overclocking for the first time, and from what i understand the regular no name PSU that came with my case just won't be enough. so here is what i'm currently looking at:
http://www.newegg.com/app/ViewProductDesc.asp?description=17-103-910&depa=1
my question is, is this a good PSU? it's going for roughly $100 and i'm willing to pay around that much. can someone tell me if this is a good choice, or any other recommendations? thanks in advance!
btw, my specs are below in my sig...

LOL...you ol fartin' son-of-a-gun!!!! We gotta be supportive to all here - no favorites. But if I had to make choices, you're the first one I'd help build one!!!! Feel better now ....you 'ol Salty Dog?
I just may have to make a trek up to Washington one day, to see the U.S.S. Washington....berthed in Bremerton?, and meet you, you crazy mad-for-life-lovin-computer jockey!!

Need counsel choosing the right GE model

Dear friends!
I'm planning to buy a G-series notebook, but model range is so vast that even retailers struggle to help me pick the right product! So far I narrowed my search to GE70 20E line of notebooks. As far as I reckon all of these laptops should come with
a) 17" display (GE70 20E),
b) Intel Core-i7 4700MQ CPU,
c) Nvidia GeForce GTX 765M GPU (GE70 20E).
From this point the 20E family further divides into a subrange. That's where I'm getting lost due to lack of detail on official site and contradicting data in online shops. I figured that GE70 20E notebooks differ in the following categories:
a) RAM - 8GB / 12GB / 16GB,
b) HDD - 750GB / 1TB at 5400 rpm / 7200 rpm
c) SSD - none / 128GB / 256GB.
My preferences are 8GB RAM, 1TB HDD (@7200 rpm) and either 128GB or 256GB SSD. So far I have identified only one model which seems to match these criteria – GE70 2OE-268.
Can you kindly tell me if it indeed meets the hardware specs I mentioned? If it doesn't, I would be very grateful if anyone could clarify this issue and direct me to exact model numbers which suit my selection.
P.S. Note to MSI employees: Please, update your online catalogs!
Thanks in advance,
Denis

Thank you for the feedback, Nichrome!
To your first point: That is perfectly clear. I wouldn't be wasting your time (and mine to register and post in the forum) if I'd found solution elsewhere.
Quote from: Nichrome on 28-January-14, 22:20:19
depends where you want to buy the notebook from. I'd rather send a message to the retail seller than ask here. 8gb of RAM is enough, unless you're going to use software that is heavy on ram (video editing etc). It would be better to go for HDD @7.2k rpm (bit faster) whatever the size would be. And in case of SSD, it's up to you. Think about that Windows (90% you're likely to use it) will need at least 40gb for it and its drivers, so 128 will be enough (I have 120gb on my PC and I've halfed it so 60gb ish.. for WIndows/Drivers and around 60gb for games). HDD would be for storage I believe.
To the second: The problem is, as stated before, that retailers struggle as much as I do. I contacted like half a dozen different distributors along with MSI support to no avail (yet). So I had to address the community since sales personnel were incompetent and MSI -- plain unresponsive.
Other than that I totally agree with your opinion on hardware in question. I'm not hesitating which one to pick. I just need a precise pointer to an MSI product containing those components, among like a hundred models within GE70 20E range of laptops. You see, wasting an upward of $1,6k on a product without being certain it's the one you need feels like a fail.

Help with choosing the right lenovo laptop model

Similar Messages

Maybe you are looking for