Help with Cleaning up Empty/White Space

Hi all,
I have a site I'm getting ready to complete, but there are a
few things bugging me.
One of which is the empty space at the bottom of the page.
I'm not sure how to address it and wanted to get your opinion on
what to do (and how to do it)
The URL is
http://feedyoursoul.org/indexDD.html,
if you look at the bottom, below the footer, you'll see there is
some white space, if you maximize your browser window is gets even
worse. What should I do about this?
This sample page will be just a template, so other pages will
have considerable more content, but for this page, the home page, I
want to clean that area up.
So any suggestions are greatly appreciated.
Thanks.

First thing to do is to fix these 24 errors -
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Ffeedyoursoul.org%2FindexDD.html
Then go read this -
http://apptools.com/rants/spans.php
and look at your table structure.
Next, don't use points on the web to size your characters.
Finally, come back and let's reconsider your layout scheme.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"jcbuche" <[email protected]> wrote in
message
news:g28r5r$a1m$[email protected]..
> Hi all,
>
> I have a site I'm getting ready to complete, but there
are a few things
> bugging me.
>
> One of which is the empty space at the bottom of the
page. I'm not sure
> how to
> address it and wanted to get your opinion on what to do
(and how to do it)
>
> The URL is
http://feedyoursoul.org/indexDD.html,
if you look at the
> bottom,
> below the footer, you'll see there is some white space,
if you maximize
> your
> browser window is gets even worse. What should I do
about this?
>
> This sample page will be just a template, so other pages
will have
> considerable more content, but for this page, the home
page, I want to
> clean
> that area up.
>
> So any suggestions are greatly appreciated.
>
> Thanks.
>

Similar Messages

How to get rid of all the blank empty white space at bottom of photoshop palettes?

on a large screen the palettes can have big tall empty white spaces below the last imput. Sometimes the corner size adjustment box is off the screen
and I want to eliminate the empty space..
Can I eliminate this extra blank space (without changing display resolution)? Why is it there?

When I take a screen shot see attached It shows the bottom of the, in this case, layers and channel, patettes but it is not actually visible or accessible on my cinema 30" screen. I know I can change the resolution so the size adjustment boxes can be reached and resize the white space away in that manner, but I like the resolution as is 2048 x1280 for my bad eyesight and continually resizing seems like wasted effort. There is no purpose for the extra white space so I want to make it so the palettes only show what is in them. Probably not possible?
separate issue: can you make it so the tool bar is alway in the front? Why should it ever be behind anything?

Printing PDF from IE with Adobe Reader - extra white space at top of page

I searched the forums far and wide but did not find this question or information to answer it. If it's out there, I'd be much obliged if you'd point me in the right direction.
A user of the web app for which I do tech support just called to say that starting today, whenever he opened a PDF from our app (in IE), the PDF looks fine on screen but when he prints the PDF, every page has extra blank/white space inserted at the top, which cuts off the bottom inch or two of each page.
No other users have called with this complaint, and if changes to our app or an automatic background Adobe Reader or IE update caused this problem, I would have heard from many users. I have a sneaking suspicion I have heard about this from other users, but since troubleshooting their IE or Adobe isn't exactly my job, I don't know if I did any more than advise them to talk to their tech support people.
I can't recreate his problem (read: it works fine for me), but I'd like to help him. Can anyone think of a reason why this might be happening?
Thanks in advance.

What I know: He's using Adobe Reader X. I do not know if it's the most recent version. The problem only exists with PDFs from our web app; he's not having trouble with other sites or with other PDFs.
I do not have a copy of the PDF; I can't give you the copy I downloaded when I logged into his account because there is proprietary confidential information on it, but everything worked fine for me and he's the only user with this complaint, so I believe it's related to his PC or printer, not to our app or to Adobe per se.
I sent him email asking for more information, but I do not know what printer he's using. I don't even know what version of Windows he's running.
Based on some info from Adobe, I suggested he make sure he's using the most recent version (10.1.2), try 'print as image" to see if that's any more successful, and make sure his printer drivers are up to date.
Given the nature of tech support, if he solves the problem or finds a workaround he's happy with, I may never hear from him again to know. I just wanted to know if this was a known issue and what recommended resolutions for it might be. Having not found anything on the web at large, I figured the Adobe forums would be a good place to ask.
Thanks for the time you took to answer.

Startup disk full? Help with clean up.

I have an older Macbook w/ a 60GB hard drive. I have ~27GB of music a few of movies and a few of pics. Is there a way to scan the drive, delete duplicates or clean up the hard drive automatically?
I need to create space and suspect there may be a lot of useless files and/or duplicate pics in multiple folders. Any advice would be helpful.
Thanks

Freeing Up Hard Disk Space - Mac GuidesFreeing Up Hard Disk Space - Mac Guides

Please help! Need to remove white space in a form.

https://acrobat.com/app.html#d=620D971lGreChvoYewoeng
I have uploaded part of my form. When the user checks all of the boxes they want on their form and hit the submit button, the unchecked boxes disappear...which is what want.
What I cannot get the form to do is remove the remaining white space within that subform so the overall form shortens. I have had my head in this for a bit and a deadline is looming!
Thank you to anyone in advance who can help!

Hi Srini,
I honestly do not know how to thank you!! You are a life saver.
I see exactly what you did and it makes perfect sense. Thank you for providing a solution and in this manner. You helped me...and I have learned something new and very helpful.
Best regards,
Lea

Help with "Automatically fill empty space on ipod" Function in itunes

I am having an issue I don't understand when trying to sync my ipod. I go into the "music" tab where it allows you to select the music you want on the ipod. In addition to selecting playlists, artists, genres, etc. there is a box you can check that says "automatically fill free space with songs." I select a playlist with only a few albums on it which leaves me with a good deal of free space. My assumption was that checking this box would RANDOMLY choose songs (or albums?) in itunes to fill up the free space. However, when I do this it fills up the free space with the *exact same songs/albums every time*! The only thing I have checked off is the 1 playlist so I don't understand why it keeps choosing the same albums and songs to fill up the free space. I want it to just randomly choose songs from my entire music collection to fill up the free space. any help is appreciated!!

Also, it seems that iTunes is not smart enough to -remove- songs when you add something new, i.e. movies or podcasts, and will constantly tell you that the iPod is full. That results in having to un-check the option, remove every song 'automatically added', add the new content, then re-check the "fill free space" box. Did no one actually test this feature or is it done on purpose to wear out your iPod quicker?

Help with clean Windows 8.1 install Yoga 2 Pro

Hey guys,
I purchased a Yoga 2 Pro about 4 months ago as a secondary computer for college. I've been a Mac user for most of my life, and was intersted in learning more about the Windows ecosystem. While messing around in the partition settings, I must have made a mistake, and deleted a partition. I've been trying to follow this guide from the forums, and have the PBR_DRV partition and a "Drive 0 Unallocated Space", as per the walkthrough, but I'm not able to install Windows 8.1 on the "Unallocated Space" from a flash drive. An error with a different code appears everytime. Could anyone help?
http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Guide-Windows-8-1-PRO-RTM-clean-install-o...

What do you mean by clean install? Are you simply restoring a backup image of the pre-installed OS, or are you really installing with a new copy of Windows?

Help with Clean Access Architecture

Hello All,
I wanted to engage some of the NetPros out there about designing our Clean Access architecture. We purchased 4 3140s (2 x CAMs w/ FO, 2 x CASs w/ FO). The goal is to use Clean Access to validate select areas of our head quarters, along with validate users in a remote location.
The HQ part of the design I can understand without issue. It's when we begin to deal with the remote office that I become uncertain about the design. The remote office is MPLS connected to HQ (L3 multi-hop). We want users in the remote office to also be L2 authenticate to the Clean Access cluster at HQ. Across MPLS this does not appear to be straightforward. We'd like to do a L2 deployment, but from what I've read this will require using L2TPv3 at the remote office to "tunnel" the VLANs from HQ to remote and vice-versa. My fear is that now the default gateway for the remote clients is the HQ Clean Access cluster. Therefore... all traffic will be "switched" across their WAN link. This becomes and issue as the remote office has local Windows domain controllers for faster file access on another VLAN... and in this scenario it sounds like the workstations would have to travel across the L2TPv3 tunnel to HQ to just have to go back across the tunnel to the remote office for file access. Sounds slow!
Does anyone have recommendations as to how to design this centralized, L2, OOB architecture. In my mind I would want the clients attempting authentication to the switch... switch forward to the CAS... CAS validates posture and passes down necessary VLAN to switch. All VLAN'ing and switching is kept remote. We operate all 3750 switches... so our infrastructure can work with NAC. Sorry for the long post, just wanted to try to explain the requirements. Thanks for the help.
-Mike
http://cs-mars.blogspot.com

Hi Mike -
Very good questions. You definitely do not need the L2TPv3 across the WAN to control the ports at the remote site.
The CASs can be deployed L2 In-Band (IB), L3 In-Band (IB), L2 Out-of-Band (OOB) or L3 Out-of-Band (OOB).
L3 OOB can be used to control the switches at the remote sites. A 2nd vlan is required for the remote site to serve as the authentication vlan. All ports start off on this Auth Vlan when a user plugs in.
The user receives an IP Address on this Auth Vlan and the local L3 device is the GWY. The L3 device should have ACLs to protect the rest of the network from this Auth Vlan. The only permit entries in the ACL should let the users get to CAS and the remediation servers. Using a network like 192.168.x.x and varying the 3rd octet on a per-site basis simplifies the ACLs if you are using the 10.x.x.x as your internal addressing. The ACLs should be places on all the MPLS routers to protect the production network from the Auth network.
Once the user proves trustworthy, the Clean Access changes the vlan on the switch to the production/normal vlan and the user has complete access as before.
CASs can be either one of the 4 roles (L2 IB, L3 IB, L2 OOB, L3 OOB) when they are added to the CAM.
If you plan to use L2 OOB for your HQ and L3 OOB for the remotes, you may need to add 1 more CAS pair to your architecture.
We have some great diagrams that the Clean Access product team have put together that will illustrate this architecture to you.
Your local SE / CSE should be able to provide this to you.
Let us know if you have any follow up questions.
Hope this helps.
peter

Help with cleaning off a 23" Apple Cinema display HD

Ok guys, I work with LCD's for a living, but mine are a bit different than the Apple monitors (plus, this is my dime, not my companies..). So, I come home to find out our "house guest"'s kid was flinging gogurt all over the place. I look at my LCD's and sure enough, both have someone oily on them.
I cleaned the dell with no issues, but my 23" Apple Cinema Display HD, has a couple of marks that won't come off (I used water and a micro fiber cloth to clean it). It's like two little oily spots about the size of the tip of a finger, and one little line in the bottom right corner.
At work, normally we would use denatured alcohol to clean the LCD surface, but I'm quite familiar with the LCD's at work, and what is attached to the polarizer. My Apple display, I'm not so sure, so I don't want to use something on it that is going to damage the surface. Any recommendations? The areas that have the issue don't seem to have any display related problems.... They aren't finger clusters, and the polarizer doesn't look damaged.
thanks! And yes, the house guest was informed what this monitor costs to replace.... and I threatened to chop off fingers (kidding).

Apple say not to use alcohol or ammonia. Dilute some hand dishwashing liquid. Moisten a facial tissue with it, and rub gently. Then use several facial tissues moistened with just water to remove the detergent residue.

HELP with BlackBerry Curve 8520, White screen after update to App World 2.0

Hi, need an answer as soon as possible please.
i downloaded the app world 2.0, after that i was told to restart. I didt, but, now i just have a White screen with the little clock on it... please... need an answer now, because my BB ys my world... Bussines, life, everything...
Here is a pic of what I've mentioned...
BlackBerry does not start anymore

Same thing for me...I am using this post to try to solve:
http://supportforums.blackberry.com/t5/BlackBerry-Curve-BlackBerry-8500/Curve-8520-stuck-on-a-quot-w...

Help with clean up duplicate records

One of my tables have duplicate records in paris that needs to be cleaned up. I want to cleanup the earlier TIMESTAMP.
ID MODIF_TIME_STAMP
483070 1/7/2005 11:49
483070 1/13/2005 17:19
483071 1/6/2005 11:49
483071 1/14/2005 17:19
483072 1/15/2005 11:49
483072 1/07/2005 17:19
9000 records
What is the easiest way to pick only the ID of the earlier timestamp of each pair.
Thanks in advance.
Ittichai

Hallo,
delete from your_tab
where rowid in
(select rowid from
(select rowid, id, modif_time_stamp, row_number() over (partition by id order by modif_time_stamp desc) rn from your_tab)
where rn > 1
)This query deletes records with earlier date for every id
Regards
Dmytro
Message was edited by:
Dmytro Dekhtyaryuk

Firefox: Flickering when scrolling - need help with clean 'new' install

Screen is flickering when scrolling (IE does not). I tried disabling add-ons and tried safe mode - neither helped. Running Win 7 Pro 64bit. Uninstalled via 'Programs and Features'. Download and reinstalled Firefox. Now it shows all my previous settings: menu bar, bookmarks bar, etc. Question: how did it get that stuff back if it 'cleanly' uninstalled? Question: how do I know it didn't pick up it's old 'bad habit' from the previous settings? I am an experienced PC user but not Firefox expert. Looking for help lest I have to ditch Firefox completely...

Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
#Open Firefox ''Options'' window (''Preferences'' on Mac or Linux) as follows:
#* In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]] and select ''Options'' for Windows or ''Preferences'' on Mac or Linux.
#* In Firefox 28.0 and previous versions, click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
#In the Firefox Options (or Preferences) window, click the ''Advanced'' tab, then select ''General''.
#In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
#Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

Dreamweaver 4 Dinosaur needs Help with Clean Up HTML Error

I'm a dinosaur still using DW 4.01 for our company website. Recently, due to a PC crash, I had to reinstall it on a new DELL Workstation running under XP Pro SP3.
Tried to run the Clean Up HTML command and got this error every time on any page I tried to use it on:
"While executing onClick in Clean Up HTML, a JavaScript error occurred." Then you have to select Cancel, or DW will abruptly close/crash.
There are a few references to external javascript files - do I need to comment these out to get CleanUp HTML to work???
Has anyone ever seen this problem before? I find ZERO references to it online.
Can't afford the $200 to upgrade to a newer version this month, nor do I have the time to learn a new piece of software. Just trying to ride the Edsel to the dinosaur graveyard til the economy gets better.
If you have a suggestion on how to FIX or workaround this bug, it would be great. Any help is greatly appreciated.

See if this helps:
http://kb2.adobe.com/cps/191/tn_19105.html

Help with cleaning out my library

Like many users I have a large iTunes library where most tracks are conveniently organised into Playlists or Albums. However, over the last couple of years, it is true that some playlists have been deleted and, indeed, tracks added to the Library which do not appear in any playlist but which I may or may not want to keep.
Is it possible, therefore, to do something within iTunes to help me find those tracks that do not belong in any Playlist (for example) so that I can then listen to each one and decide if I want to keep it or not? (perhaps using a Smart Folder or something?)
Also, assuming I end up with a bunch of tracks in a Smart Folder which are not attributed to any playlist, how do I delete these tracks from the folder AND from the Library at the same time?

The way I have my music organised is by Playlists representing either Albums or pieces of work by the same artist. However, for quite some time, iTunes has also been my default mp3 or aiff player which means that quite a lot of random audio has drifted in there. Since iTunes doesn't have any clever way of tidying up the Library (e.g. Library Folders or "Shelves") I am looking at a way to quickly weed out the stuff I don't want to keep. Using the logic that most of the stuff I want has already been placed in PLAYLISTS, I would like to find a way to push all the stuff that Isn't allocated to a playlist into one Folder where I can decide whether to keep or to trash.
Therefore - my question is.....Can I quickly sort un-allocated music to a Folder and then trash individual items from that folder (and the Library) at the same time if necessary?
By "un-allocated music" I mean the tracks in the Library which do not belong to any Playlist in iTunes.
Alternatively - can anyone suggest a neat way to tidy the library with 1708 items in it, some of which may be unwanted.

Help with Clean Install of Yosemite

I am doing a clean install of Yosemite in hopes of resolving my many MacBook Pro issues. This has been recommended by Apple Support before installing a new hard drive which would be the next option.
My Macbook Pro is an early 2011, running Mavericks, 2.7 GHz Inel Core i7, OSX 10.9.5. 16 G B Ram, 500 GB Hard Drive with over half available.
I have Yosemite on a Bootable USB drive and a current back up on a separate external hard drive. The question I have is should I update to Yosemite first, do another back-up and then do the clean install or is this an unnecessary step?
Thanks in advance for any assistance.
Message was edited by: airbusbarkley
Tried to repost in Macbook Pro instead of Macbook Air

airbusbarkley wrote:
I have Yosemite on a Bootable USB drive and a current back up on a separate external hard drive. The question I have is should I update to Yosemite first, do another back-up and then do the clean install or is this an unnecessary step?
How do you have your data backed up? Time Machine or another method? If Time Machine, run it from the recovery partition and then install Yosemite. If you simply have data stored on the external HDD with no OSX, Install Yosemite and then transfer the user data.
Ciao.

Help with Cleaning up Empty/White Space

Similar Messages

Maybe you are looking for