Help with clear instructions regarding media server

I have a Time Capsule that I just setup following the guide provided by Apple. It is setup so that it is connected by Ethernet to a router and now has its own network. I do not want to use it with Time Machine, what I would like to do is set it up as a media server for videos, music, pictures, ect. I have searched through the forums but have not been able to find a clear answer on how to do so. Also, while searching through the forums I believe that I read that someone set their Time Capsule up as a server and was able to access it wherever they went. How would I go about setting up my Time Capsule so that it can be used as a media server that I can access from different locations (for example, have the Time Capsule in Virginia Beach and be able to access it in Richmond)? Any detailed instructions on how to do this would be greatly appreciated.

First using Airport Utility go to Disks button then file sharing tab. Check box "enable file sharing." Secure your disk. Check box "share disks over ethernet wan port."
Note when you first use Airport Utility under "page" airport found a TC write down that ip address example 10.0.1.1 and a second TC if you have one. Then under the internet tab write that ip address also something like 69.48.23.233
Check box "show servers on desktop" under Finder preferences.
Using Finder top file menu, select GO function "connect to server." you'll get a window blank. Type afp://ip address of your internal network ie router example 10.0.1.1 ; if you set a password enter it; your TC hard drive should mount to desktop; use it like your using in the Finder.
If you are away from your home network say Pittsburgh visiting and you forgot to take a file with you which is in Detroit. On a computer networked in PA then use the afp function GO command and use the internet ip address the example of 69.48.23.233 The TC hard drive should mount to the desktop.
Do not use the files as they are on the server, too slow and problems can occur because of the connection. Just download the file you need and give it time. I usually do mine just before bedtime so its there when I wake up.
Hope this sets you straight.

Similar Messages

HT1365 Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

The figures you mention only make sense on your intranet. Are you still using the same wireless router. The verizon one is somewhat limited as far as max wireless-n performace. For one thing it only has a 2.4 radio. I like many people who wanted wireless-n performance before they even added a wireless-n gigabit router, have my own handling my wireless-n network.

Hi guys can someone help with a query regarding the 'podcast app' why do they not have all the episodes that relate to one show available why only half or a selected amount

Hi guys can someone help with a query regarding the 'podcast app' why do they not have all the episodes that relate to one show available why only half or a selected amount

THanks...but some days they have all the episodes right back to the very first show...ive downloaded a few but they are only available every now and then which makes no sense...why not have them available the whole time ??

Help with Moving Emails from Exchange Server 2013

Hi Team,
Help, I need a solution on how to copy incoming and outgoing emails together with their attachments and was hoping someone could help with a solution I need to find for this problem.
1) I have a need to copy all incoming and outgoing emails & attachments from Exchange Server 2013 mailboxes on a daily basis, so they can be archived into an external 3rd party database overnight.
I believe that the first step is that I can set up another Exchange mailbox, through Journaling to receive these emails.
Is there any way that these emails can then be moved direct from the Journaling mailbox that I have created, to a shared folder on the network? If so what format would they be sent out as e.g. .msg, .ems and what is the process?
Failing that, could they be sent to an Outlook client (not another Exchange mailbox) on the network and stored in a .pst file? (I have a program that will export them from .pst)
I would really appreciate any assistance that you can provide in this matter.
Regards, Greg.

Hi,
You can set auto-forward on journaling mailbox and auto-forward emails to another mailbox. Why don’t directly archive the emails from the journaling mailbox “an external
3rd party database”.
Thanks,
Simon Wu
TechNet Community Support

Help with Facebook and Social Media wigets (Was: How do I fix the three probs that...)

I am having problems with the facebook or social media widgets. I would like the link to send viewers to my facebook business page, but when testing it shows my pic and a 'switch' sign (see screen shot) and when I open the site the message is as the other screenshot, great, but I don't know where to find which 'asset' is the problem and why. Also why bother having child pages if the menu doesn't reflect that? I see that drop down menus are an issue, also with some other forum members.
Thanks for any help offered!, I think I have solved the first problem now but still would appreciate any help with the other 2!
For some reason the facebook widget now loads the correct page, and I give up about the drop down menu, hopefully this will be addressed in the next update of Muse??

Hello,
For the "asset" issue, try locating the asset in the assets panel. It should have an icon like this: http://jingsite.businesscatalyst.com/jing/2013-12-16_0917.png
For the child pages in the menus issue, go to the menu options (by clicking the small blue arrow in the right top corner of the menu), and then change the menu type to "All Pages" instead of "Top Level Pages".
Hope this helps.
Cheers
Parikshit

Need help Using Time Capsule As Media Server

New time capsule owner was wondering if someone could help me set it where i can put all my digital media, Itunes, Dvd-rips on to the TC and use it as a Media Server.
Thanks for your help fellas

You will need to run media server on a PC / Mac and use TC as NAS that stored your media files.

[HELP] How to livestreaming with HDS and Flash Media Server?

Hi again! I made a discussion before but nobody solved my problem. My orginal problem is here:http://forums.adobe.com/message/4902951
Regards!

Hi,
Try turning off the firewall on your machine and then try the steps mentioned in the following link:
http://help.adobe.com/en_US/adobemediaserver/devguide/WSd391de4d9c7bd609-52e437a812a3725df a0-8000.2.3.html

Help with "clearing" in three column format

The code is pasted in below of a three column page I have created. However, the background color in the sidebars does not reach to the footer it follows the content. I know that I need to "clear" the columns but as a newbie I'm not sure how to do so. Any help would be appreciated.
Thanks!
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
<style type="text/css">

</style></head>
<body class="thrColLiqHdr">
<div id="container">
<div id="header">
    <h1>Header</h1>
</div>
<div id="sidebar1">
<h3>Today's Top Health News</h3>
    <p>Vitmains C and E cleared in melanoma scare. </p>
<p>Older men often binge drink, too</p>
<p>Short kids are psychologically OK</p>
<p>New drug for schizophrenia and bipolar disorder approved</p>
<p>Mediterrenean Diet plus exercise lowers risk of Alzheimer's Disease</p>
<p>Not enough sleep may raise the risk of diabetes</p>
</div>
<div id="sidebar2">
    <h3>Podcasts: In-depth, awarding winning Radio Health Journal Reporting</h3>
    <p><img src="../graphics/I-am-safe-now.jpg" width="106" height="80" align="left" />
<p>Perinatal Hospice: Giving meaning and easing grief when birth to death is measured in hours </p>
<p>Medical Mystery Shoppers: Fake patient who keep healthcare quality high</p>
<p>Pediatric Live Transplants: Children can receive a slice from a living adult donor</p>
<p>The Selling of healthcare reform: Why revved up rhetoric matters more than facts</p>
<p>Early Alzheimer's diagnosis: The benefits of early treatment</p>
<p>Dementia drugs: Are medications too common in nursing homes?</p>
<p>Pregorexia: Anorexia while pregnant-more common than we think</p>
<p>Mop men: People who clean up after unexpected death</p>
<p>Gout: The return of the "disease of kings"</p>
<p>Prevention and healthcare reform: How much money can prevention really save?</p>
</div>
<div id="mainContent">
    <h1> Featured Content </h1>
    <p><a href="http://speakaboutbipolardepression.com/">The economy is leadiny many Americans to feel additional stress. This is particularly concerning for the more than 8 million Americans with bipolar disorder.</a></p>
    <p>As modern medicine extends life expectancy, prevelance of Alzheimer's Disease in the U.S. is expected to skyrocket from about 5 million to 16 million in 2050. Understanding risk factors is more important than ever. </p>
    <p>You might thing a blood transfusion ordered by a physician would be safe and effective. But a new analysis by an international panel sbows most transfusions have little benefit. In fact, they may be dangerous.</p>
    <h2>Information about our program's guests </h2>
    <p>Developing A Brain Eraser: Dr. Andre Fenton</p>
<p>Too sexy, Too soon: Kids, the media, and sex: Dr. Diane Levin, author of "So Sexy So Soon: The new sexualized childhood and what parents can do to protect their kids"</p>
<p>Everything You Always Wanted To Know About...Death: Harold Schechter, author of "The Whole Death Catalog: A Lively Guide To The Bitter End"</p>
<p>Borderline Personality Disorder: Randi Kreger, cofounder of BPDcentral.com</p>
</div>
<br class="clearfloat" />
<div id="footer">
    <p>Footer</p>
</div>
</div>
</body>
</html>

Are you posting to the right forum? This is a Designer form where we are working with PDF forms. This looks like HTML!
Paul

Can anyone help with clearing space on my Mac Mini, it says the hard drive is full and runs slowly.

Please help, we got the Mac Mini from a family member so it may have his stuff on it but no longer required, we have only put a smal amount of data on it so don't believe we have over filled it. I backed up to a hard drive all photos etc as I thought it may be them filling it, now I cannot even scan a document to it. Is there any way to Defrag it as you can normally do to a windows system as well as either declutter it or restore the whole thing.
Best Regards
Smithy

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

Help with installing the Revel media downloader.

When I thought I downloaded the media downloader it tells me is misfigured. I can't archive my Photoshop Files without this. Help.

Hello
Here is the instructions for you to download your media files to your computer,
1. Install the Adobe Air application click here to install http://get.adobe.com/air/
2. Click on this link to install the Adobe Media Down loader
http://www.photoshop.com/misc/membership-faq#downloader
After you install the Adobe Media downloader, then you will be prompted to log in with your Adobe ID. This will be the Adobe ID that you used to log into Photoshop.com
Let me know if you are still not able to download your files
Thanks
Scott

Need help with Apache on OS X Server 10.4.8

I am unable to get mod_rewrite to work... Additionaly, bonjour is not working at all.
I am wondering if there are any known issues (that I could not find) and/or helpful solutions. I was considering doing a recompile based on the instructions found at http://lists.apple.com/archives/macos-x-server/2005/Apr/msg01171.html
I am not sure if these instructions are valide for the 10.4.8 environment... os if anyone knows fore-sure please do let me know.

Sorry, I thought the goal was to get the RewriteRules working - recompiling Apache seemed like the harder approach to me (with no chance of it working if the flaw was in the RewriteRule statement itself )
That said, the instructions you reference will probably work. As will downloading the source from apache.org and running their standard build. It won't be the same as the build as shipped by Apple, though.
The issue is that everyone's instructions on how to build apache (including the one you reference) suits a particular individual's needs/expectations of what s/he wants. In this case they wanted SSL, but you might or might not want/need that. You might need other modules they didn't include, though, so there's no guarantee their build will work for you.
In any case you're not going to get the custom Apple modules including 'apple_auth', 'apple_spotlight', 'hfs_apple' or 'spnego_apple'. These are developed by Apple and included in their build but are not part of the standard Apache distribution. You might find the source for them in the Darwin source but I've never looked.
So, in summary, there are so many ways to build apache, with so many combinations of features and modules, it's impossible to say whether that'll work for you since everyone's situation is different.

Need help with Premiere Pro 6 media/file management!

I've been an Avid editor for 20+ years and understand media management in that world. I've recently learned FCP 7 and understand media management in that world. But for the life of me I cannot wrap my head around how Premiere Pro 6 manages media. I am looking for a very straightforward explanation, chart, anything to make sense of this. Thanks in advance for helping an old dog learn new tricks!

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Need help with recomendations on licenses for Server 2012 Std R2

I have a client who wants to purchase a server from me. I can buy the parts and assemble the system no problem. But I'm a newbie when it comes to user CALs or device CALs. The company will be having about 50 computers connecting to it. I'm assuming they'll
just be using the standard user/password domain login.
What else would I need to purchase in addition to the OS?
What kind of features does the vanilla server OS give you? Can 50 computers connect to just the OS alone? I've seen places that have a 1 user CAL for $36. Do I need 50 of these? If I don't purchase them right away, could my client still connect their computers
to the server?
mr.t

Hello,
Licensing Windows Server 2012 comes in four different flavours foundation, essentials, standard and datacenter.
Your client is wanting connect 50 users which really does rule out two of those flavours.
Essentials is ruled out because it is an OEM operating system and only supports up to 15 users and has limited functionality
Foundation is rules out because it only supports up to 25 users and has limited functionality
This leaves us with two Windows Server 2012 flavours you can purchase Standard or Datacenter. They both have exactly the same functionality; the difference is the virtualisation
rights. With standard one license covers two physical processors and supports two virtual machines, if you need more virtual machines then you would have to buy another standard license and giving the right to four virtual machines for example. Then
for datacenter license covers two physical processors and covers you for an unlimited amount of virtual operating systems.
To make this hopefully easier:
1 x standard license covers = 2 x physical processors – 2 x virtual operating systems environments
1x datacenter license covers = 2 x physical processors – unlimited virtual operating environments
Both Standard and Datacenter come with Full functionality
Meaning standard licensing is really for no or very limited virtual environments, then if you are looking in to a virtual environment Datacenter is the way to go.
On regards to CALS are required for every user or device accessing the server. They/you will need to decide whether or not you go for Device or user CALs. User CAL
is more expensive but it gives companies a lot more flexible if the users are running more than one device for example if they support a bring your own device strategy. Although there are different types of CALS depending on what the customer will be
looking to use and access.
Also can your user still connect to the server: technically speaking yes, CALS are not like license keys you cannot activate them it is effectively a piece of
paper to say you have purchased X amount CALS and your compliant to allow your users to connect. So you can connect with out purchasing but you will not be compliant from a licensing standpoint.
Hope this helps to some degree!
Cheers,
Harry

Need Help with Comprehensive Interview Questions Weblogic server admin

Hi
I would like to thank everybody in advance
I am beginner with weblogic server administration and i would greatly appreciate if someone share the comprehensive interview Questions
PLEASE HELP ME
Regards
Schelako

Hi Schelako,
You will get many links regarding weblogic Interview questions on Google.
For basic Weblogic interview questions and answer you can follow the below links
http://www.coolinterview.com/type.asp?iType=469
https://sites.google.com/site/weblogicadminsite/weblogic-issues/weblogic-interview/wla-interview-questions
https://sites.google.com/site/weblogicadminsite/weblogic-issues/weblogic-interview/WLA-Interview-Questions--2
https://sites.google.com/site/weblogicadminsite/weblogic-issues/weblogic-interview/weblogic-administrator-interview-questions-3
As you said "I am beginner with weblogic server administration"
It would be better if you start Oracle doc's for Weblogic Administration
Regards
Fabian

Need urgent help with RAID failure on Graphics server (running OSX10)

Hey.
Here's the deal... Our graphics department has a MAC G4 (fully upgraded. newest patches, OS, etc.) that's got a 4 port SATA RAID controller. They use this with four 750GB hard drives as an external RAID (the OS is on a seperate, 65GB hard drive). The way it's set up, through Apple's OS, is we have the four 750GBs in pairs... those pairs are striped, and then the two sets of striped 750s are mirrored. This has worked just fine for a number of months, but we recently had a power surge, and now we're unable to mount "Monkey" (the name of the 1.4TB array).
See the below screenshots for more clarification.
http://www.amcdoors.com/lorenzo/raidsetup.JPG
This shows the RAID card, and the four SATA cables coming out of it.
http://www.amcdoors.com/lorenzo/leftside1.JPG
As you can see in this and the below screenshots, this shows the 1.4TB Striped set as 'online', but the two below (the two 750GB hard drives) show up as "offline".
http://www.amcdoors.com/lorenzo/leftside2.JPG
this shows the actual drive i click on. same thing
http://www.amcdoors.com/lorenzo/leftside3a.JPG
If i click the entire array, you can see how it's set up (the Mirrored RAID set consisting of the two Striped RAID sets). The RAID sets (all 3 of them) are showing up as online, yet the drives are offline. No idea why. The drives are all powered, and are spinning, and plugged in.
http://www.amcdoors.com/lorenzo/leftside3b.JPG
when you click "Monkey Drive", nothing shows up in it. i don't remember if anything ever used to. if you click 'mount', nothing happens.
http://www.amcdoors.com/lorenzo/leftside4.JPG
http://www.amcdoors.com/lorenzo/leftside5.JPG
this shows the exact same problem as the first RAID set.
http://www.amcdoors.com/lorenzo/verifyRAIDset1.JPG
If you try to Verify the RAID set, it shows that no repairs are necessary
http://www.amcdoors.com/lorenzo/verifymonkey.JPG
If you try to verify Monkey, you get a "Volume Needs Repair" error... but when you try to repair it, you get this:
http://www.amcdoors.com/lorenzo/repairmonkey.JPG
Really need help; this is a pretty critical problem. Someone that's familar with RAID solutions on MACs please help me out. We can't risk losing any data if at all possible.
Thanks
~Lorenzo

You might want to post this to the Server Products forums.

Help with clear instructions regarding media server

Similar Messages

Maybe you are looking for