Help with clipping masks, please?

I am running cs4, I have a picture of a hand holding a piece of paper, I want to put text behind the thumb and the forefinger. I'm thinking clipping mask, but I can't seem to get it to work right. Please help?

Youv'e got your clipping mask reversed. You want to draw paths around the areas you want to keep where the text is concerned. What you currently have would allow you to mask content in the fingers themselves, not outside of them. And you want the clipping mask to be placed on the text, not on the hand image.
Basically you want a path which matches the outline of the card (going around those fingers) then place the text inside that clipping mask.
Red path is the clipping mask....

Similar Messages

Help with clipping mask in illustrator cs5

In Illustrator CS5, is there any way to get rid of the white space around the artwork when exporting a jpg? I currently use the mask tool, but when you export the jpg, it still shows the white space where the clipped objects are. Is there any clipping mask? Or any way to just make the jpg the size of the artboard, that way any of the objects that fall off the edge of the artboard woldn't be included?

Yes but if I use the artboard, when I export it to a jpg it still has the white space around the outside. Some of my clipped images fall outside the clipping mask so there is white space where the physical images are even though the mask technically covers them up. Thanks

Help with Clipping Mask and text!

This has really been frustrating me.
Designing this logo at the mo - the circle is a shape and the L is just type on a separate layer on top with the same colour as background. What I want is to make the L cut into the circle so that it's essentially transparent, where I can place it on any coloured background and the L will blend it naturally without constantly changing typeface colour of 'L'.
Any ideas guys? Using CS5. I'd appreciate any help.

Hi,
One way is to put your text and circle into a layer group, then set the Blending Options:Custom to Zero fill and Knockout to Shallow.
The layer that is directly below the layer group will show through the text.

How to solve illustrator cs6 save as cs5 problem about the stroke(when the stroke with clipping mask and color is gradient, save as cs5 will change to embed ).

how to solve illustrator cs6 save as cs5 problem about the stroke(when the stroke with clipping mask and color is gradient, save as cs5 will change to embed ).

Because it was not possible to apply a gradient to a stroke in CS5. When you open the file in CS5, it is reduced to something that can be rendered in CS5.

Seamless repeating pattern - using embedded images with clipping masks

Hi forum,
We struggle a bit creating a seemless repeating pattern that includes embedded images with clipping masks applied.
Our pattern is a 550x550mm black square with various embedded inserted on top. All of these images have Clipping Masks applied to hide unwanted areas.
These images are placed so they create a seamless repeating pattern and this includes areas that overlap the square.
Once we create a swatch from this pattern the repeatable area becomes too big as it includes the unwanted areas hidden by the clipping masks.
Because the repeatable area is now too big it's actually not repeatable.
We tried various things in order to solve this issue. Pathfinder/crop to delete the unwanted areas in the images etc.
None of them worked good enough.
We though of just livetracing the images, but due to the complexity this is not an option.
Do we really have to do our "cutting" in Photoshop or do you know any fancy tricks for issues like this?
Appreaciate your insight
Kenneth

Kenneth,
You may try the destructive deed, with the Clipping Mask selected:
1) In the Transparency palette/panel dropdown list select anything but Normal (Multiply is fine),
2) Object>Flatten Transparency, just keep the defaults including 100% Vector,
3) Shudder.
This should reduce the size to the Bounding Box of the Clipping Path.

Help with access control please

So I'm trying to set up my brother's PSP to the wirless network through MAC address timed access. What I want to do is make it so that he can only access it through certain times in the day. I'm having troubles with actually getting it to work. Everytime I set it up, the PSP only show's up as a DHCP client and not a Wireless client. I tried the option panel with the add wireless clients through the first try access. Could I get some help with this issue please? Thanks!

Just to calm your fears... There is no conspiracy. If someone had an answer or a suggestion they would post it.

Trouble with mass amount of text and clipping mask - please help!

I have a curvy vector image that I want text to appear in, then create a clipping mask. When I try this I get a message saying that the text object is extremely complex and might not print. The file is impossible to move around and sometimes crashes my machine.
Here is a screen cap of what I'm doing:
http://www.aaronpenton.net/mask.html
I blocked all the text so there's just a ton of it.
This is for a large graphic (22') that will be placed on glass.
Is there a better way to do this? Or a way of making the file more manageable ?
Any help is much appreciated.

>I have a curvy vector image that I want text to appear in, then create a clipping mask.
Inaccurate description. You are using the text as a clipping mask for the image. That's a lot of text, which means a very complex compound path with tens of thousands of points. No wonder this is slowing things down.
Try using the text as an opacity mask instead, then flatten transparency. Keep a copy of the text and a copy of the wave on hidden layers so you can go back and edit the text or modify the path.

Some help required with Clipping Masks

Hi,
I'm quite new to illustrator - I've made designs before but really just playing at it.
Now, though, I have a design which I had "grunged" up by applying a texture and knocking out the sections of the design with it in Photoshop. However, I want to learn how to do that in illustrator and thought that clipping mask was the answer.
I can get the clipping mask to work except it creates the opposite effect I am after...It masks the portions of the image I want to keep visible leaving those areas I want masked visible.
In effect I need to inverse the mask but I don't know how to do it in illustrator.
Hopefully, I've made it clear what I mean and I appriciate any advice.
Ta
Malc

You can use the Transparency panel to make an opacity bask as well and inverse that.
Or if you wish use the pathfinder panel to minus front. I think the second icon on top from the left.
Read the help files about opacity masks, pathfinder and clipping mask
and it might also work as a compound path Command 8 or Control 8.
Read about compound paths

Problems with clipping mask, Photoshop CS6

I have been working with a clipping mask around a complex item. This included a large clipping mask around the edge of the item, along with sections inside this path that were also 'cut out'. I am not sure how, but I seem to have done something which is now stopping me from making the additional 'internal' paths. Instead of these areas being blocked by the clipping mask, they are appearing as paths drawn over the image and not as part of the clipping layer (yes, checked that I was working in the right layer). I have checked the 'outside' path and this is all connected - no gaps. I have tried to set up a new file and start again, but now can't seem to make the mask behave properly. Can anyone help?
thanks
FB

THanks for that, but to be honest I am a real novice - learning in pieces - so am not sure how to check path modes etc. ..Any suggestions??
Here's a screen grab of the work and current settings:
Message was edited by: fjb3012. When I try and cut out new sections one of two things happen - I lose the image completely OR the new path sits on top of the image, with no clipping.

Trouble with Clipping Masks

Hello!
I created a pattern in illustrator, and then I created an object, and I wanted to fill half of the object with the pattern, so I used a clipping mask to do this.. however, now when i try to group everything together, the clipping mask in released and the pattern spills all over the artbaord... when i try to copy and paste into a new document, everything is pasted as white instead. When i try to merge the layers, the clipping mask is released...
I'm not sure how to fix this and have been searching for a solution for it. I hope you can help me figure out how to keep the clipping mask from releasing..
Also, I tried rasterizing but that doesnt work either and it makes my shapes all rough and choppy!
Thank you

Thanks for replying but unfortunately that did not help!
I always select with the solid selection tool ^^ infact when i want to select everything i just use command+a.
Anyway, I'm still unable to group or copy the entire picture without the clipping mask releasing..

Copy object with clipping mask from illustrator to photoshop

I want to copy objects from illustrator to use in photoshop, but the eps file that i am working in has a clipping mask and when i attempt to copy objects in that file from illustrator 6 to photoshop 6, portions (in some cases) all of the object turns black or gray. I'm sure this is a simple noob error (hope my question is clear enough), and it's driving me nuts. I have searched for solutions using terms "clipping mask, black, copy, move, illustrator, photoshop, etc." and can't find any discussions on this topic. Can you please help?
Here are the print screens to show you what i get in ai and ps -
(see blue outlined oval object selected - opaque white gradient)
(when moved to ps, opaque whitish oval turns black)
I'm such a noob! Thanks in advance for your help!

You simply lose the blending modes and transparency settings because this stuff works differently in both programs. You will have to reinstate it manually e.g. if the white highlight is created usuing Add blending mode, you will ghave to use the same in PS...
Mylenium

How do I export with clipping mask?

I'm a newbie to Illustrator.
I have a starburst design with a clipping mask. When I try to export as png or jpg, there is a transparent or white border around my design - where the items clipped by the clipping mask are hidden.
I have flattened the file before exporting. I have "fit to art board". I have checked the "use art board" box when exporting. Nothing removes the border. My art is 8.5 x 11, and my art board is 8.5 x 11. Any other suggestions?
Thank you!

HI Elizabeth,
Here is a link that will help you with this issue. adobe illustrator - Take away negative space in clipping masks - Graphic Design Stack Exchange This should give you a bit of guidance on this.
Scott

Need help with simple mask problem

hi there this is mark from superbooty a band that has played in the bay area for over 10 years...
i was wondering if someone could help me with a Motion2 problem i'm having regarding masks.
i'm working on this simple animated scene of a car going by a beach - the photo is from the passenger side and shows the outside mirror.
i'm moving the background (different from the original that came with the car) and i want to move an image of tokyo inside the mirror housing too.
i figured out how to do the mask but when i try to animate the image of tokyo the mask layer moves with it. when i lock the mask i can't move the image - ???
there's got to be a way to lock the mask but be able to move what it is masking..
here are the links to three images that show what the problem is - the first is
the shot of the scene unmasked, shot 2 is the scene with the mask enabled, and the third is the shot when i try to animate the tokyo background:
http://superbooty.com/mirrorbeach1.jpg
http://superbooty.com/mirrorbeach2.jpg
http://superbooty.com/mirrorbeach3.jpg
any help would be most appreciated - thanks!

Adam's solution is the one I'd use - put the mirror contents in a layer, mask the layer, then manipulate the mirror content image. Did this solve it for you - if so, please click on the or buttons over posts as appropriate...
Patrick

Help with If statement please

Hi,
First Special thanks to Kglad for the help with the AS1 to AS3 conversion.
I've been able to link up my buttons to play a different frames of the movie. this was my novice way of finally getting the programming to work.
In frame 95 I have
var myLoader:Loader = new Loader();
addChild(myLoader); var url:URLRequest = new URLRequest("page1.swf");
myLoader.load(url);
in frame 165:
var myLoader1:Loader = new Loader();
addChild(myLoader1); var url1:URLRequest = new URLRequest("page1.swf");
myLoader1.load(url1);
My buttons link to 116 which plays a frame and loads ^
in frame 226: removeChild(myLoader).
But if the user has looped back into home from another part in the movie clip then it would need to remove myLoader1 instead of myLoader.
I'm guessing there is some really dynamic way to solve the programatic nightmare i'm developing, but I'm really novice.
So what i need is an if statement for frame 226
That would do something:
if(myLoader <> null
removeChild(myLoader)
else(
removechild(myLoader1)
Anyone have a method for this?

yes, you can use the same urlrequest but just change its url property:
// initialize, for example in frame 1. this is done once and never again:
var loader:Loader=new Loader();
var urlR:URLRequest=new URLRequest();
// then in frame 2, for example:
urlR.url="page1.swf";
loader.load(urlR);
// in frame 20, for example:
urlR.url="page2.swf";
loader.load(urlR);
// in frame 30, for example:
urlR.url="page3.swf";
loader.load(urlR);
//etc. if you're loading any swfs that play streams (sound or video), you'll want to add some code to this.

Help with photo albums Please

Hi, i really need some help with my pictures, I've only got a very basic understanding of how my phone works and have somehow put a load of albums on my phone when i plugged it into the computer-I want to delete some of them off the phone but cannot work out how to do it, when i plug my phone in i can find the photo tab but cannot actually see the pictures and can't see any delete button!!! Please can someone help me, basic explanations would be gratefully recieved xxxx

The photo sync is one way: computer to phone. To remove photos, synced to your phone, remove the check marks next to the albums/folders under the photos tab in itunes & hit the apply/sync button. They will be removed from your phone. You cannot delete photos that were synced to your phone, directly on your phone. The easiest way to manage photos synced to your phone is to create albums or folders on your computer. Move whatever photos you want on your phone into these albums/folders & then select them under the photos tab in itunes to sync to your phone. You can then remove or add photos to these various albums/folders on your computer & the itunes sync process will update your phone every time you sync.

Help with clipping masks, please?

Similar Messages

Maybe you are looking for