Help with CMOS battery type for K7 Pro

Please help me identify my CMOS battery, so I can replace it. Mainboard MS-6195 ATX IR3. What is the battery number, manufacturer, and cross reference with other manufacturers. Thank you for your help.

Quote
Originally posted by wonkanoby
A CR 2032 is what it looks like,any camera shop big chemist,pc store
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=94&MODEL=MS-6195

Similar Messages

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

Help,just entered registration code for quicktime pro,help needed

Help,just entered registration code for quicktime pro,help needed,cant seem to see the quicktime pro screen i saw on internet with all the edit and extra things at the top,i dont understand this,any help,Dave

I hope this helps http://support.apple.com/kb/ht2240 good tips on your prob here..good luck

Non-varargs call of varargs method with inexact argument type for last para

i have no idea what the error:
non-varargs call of varargs method with inexact argument type for last parameter
means.
return (Component)sceneClass.getConstructor(
new Class[]{int.class, int.class}).newInstance(
     new Integer[]{new Integer((int)sceneDimension.getWidth()),
            new Integer((int)sceneDimension.getHeight())});
this is the problem area but i'm not sure how to get around it..
any help would be appreciated

I am a Java learner and I got the same warning. My code runs like this:
import java.lang.reflect.*;
class Reflec
     public static void main(String[] args)
          if(args.length!=1)
               return;
          try
               Class c=Class.forName(args[0]);
               Constructor[] cons=c.getDeclaredConstructors();
               Class[] params=cons[0].getParameterTypes();
               Object[] paramValues=new Object[params.length];
               for(int i=0; i<params.length; i++)
                    if(params.isPrimitive())
                         paramValues[i]=new Integer(i+3);
               Object o=cons[0].newInstance(paramValues);
               Method[] ms=c.getDeclaredMethods();
               ms[0].invoke(o, null);
          catch(Exception e)
               e.printStackTrace();
class Point
     static
          System.out.println("Point class file loaded and an object Point generated£¡");
     int x, y;
     void output()
          System.out.println("x="+x+"\ny="+y);
     Point(int x, int y)
          this.x=x;
          this.y=y;
When I compiled the file I got the following:
Reflec.java:26: warning: non-varargs call of varargs method with inexact argument type for last parameter;
cast to java.lang.Object for a varargs call
cast to java.lang.Object[] for a non-varargs call and to suppress this warning
ms[0].invoke(o, null);
^
1 warning
Since the problem was with this line "ms[0].invoke(o, null);" and the specific point falls on the last argument as the warning mentioned that " ... method with inexact argument type for last parameter", I simply deleted the argument "null" and the line becomes "ms[0].invoke(o);" and it works, no warning anymore!
DJ Guo from Xanadu
Edited by: Forget_Me_Not on Jan 8, 2009 10:39 AM

Need help with a activation code for Adobe Acrobat X Standard for my PC,, Don't have older version serial numbers, threw programs away, only have Adobe Acrobat X Standard, need a code to unlock program?

Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7.

You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.

[solved]Need help with a bash script for MOC conky artwork.

I need some help with a bash script for displaying artwork from MOC.
Music folders have a file called 'front.jpg' in them, so I need to pull the current directory from MOCP and then display the 'front.jpg' file in conky.
mocp -Q %file
gives me the current file playing, but I need the directory (perhaps some way to use only everything after the last '/'?)
A point in the right direction would be appreciated.
thanks, d
Last edited by dgz (2013-08-29 21:24:28)

Xyne wrote:
You should also quote the variables and output in double quotes to make the code robust, e.g.
filename="$(mocp -Q %file)"
dirname="${filename%/*}"
cp "$dirname"/front.jpg ~/backup/art.jpg
Without the quotes, whitespace will break the code. Even if you don't expect whitespace in any of the paths, it's still good coding practice to include the quotes imo.
thanks for the tip.
here it is, anyhow:
#!/bin/bash
filename=$(mocp -Q %file)
dirname=${filename%/*}
cp ${dirname}/front.jpg ~/backup/art.jpg
then in conky:
$alignr${execi 30 ~/bin/artc}${image ~/backup/art.jpg -s 100x100 -p -3,60}
thanks for the help.
Last edited by dgz (2013-08-29 21:26:32)

I would like to know what happen with my battery, if my Mac Pro Notebook is connect to the electrical power all the day. what should I have to do, connecting or disconnect

I would like to know what happen with my battery, if my Mac Pro Notebook is connect to the electrical power all the day. what should I have to do, connecting or disconnect

hi

I need help with downgradeing my ios for my ipod touch 4th gen

i need help with downgradeing my ios for my ipod touch 4th gen

As has alwys been the case, you cannot go back.
Sorry

Cmos battery voltage for k7t266 pro2-ru ?

hi
i was trying everywhere to find out what the cmos battery voltage for this mb should be, nothing in the manual about this.
i am running this mb in over 3 years now and battery voltage according to pc alert III is 3.39v.
i would like to know what is the lowest voltage limit.
thanks

thanks wonkanoby

S apple coming out with a new version for Macbook Pro MD101HN/A ? what should i go for Macbook Pro or Macbook air since my usage are basic mainy internet , word , excel , powerpoint etc.

Is apple coming out with a new version for Macbook Pro MD101HN/A ? what should i go for Macbook Pro or Macbook air since my usage are basic mainy internet , word , excel , powerpoint etc.

souvikfromKolkata,
you’ll know as soon as the rest of us do if Apple decide to produce a new non-Retina model. My guess would be that they won’t do so, but that’s only a guess.
With Internet, Word, Excel, and PowerPoint representing your main usage, either a MacBook Pro or a MacBook Air would be suitable for you.

Need help with graphics card options for an early 2008 mac pro

Hello,
   I have an early 2008 mac pro with 2 x 3.2 GHz quad core Intel Xeon and 6Gigs of ram, currently running with an Nvidia Geforce 8800 GT with 512mb.
    It is also running 10.7.2.
   I would like to either add a video card on top of the one I am currently running or replace it completely if necessary.
   I do video editing on the Mac, no gaming and only a small amount of photoshop, and as the resolutions get larger I would like to have my machine keep up.
   My questions are,
     1. What cards would you the community suggest?
     2. Can I add a whole other card to my system or do I have to replace the current one?
     3. If I can hold two cards what special accomidations would be needed in regards to final cut performance if any?
    Thank you for any help you would like to give.
Rob

The two main cards for mac pros are the apple versions of the ATI Radeon 5770 and 5870.
The 5770 requires one aux power adaptor and the 5870 requires two. So generally you could only have one 5780 or two 5770's.
Video cards which don't require aux power should be able to coexist with these cards so log as it's all within the power supply maximums of course.

Losing my battery life for macbook pro very fast

I charge my battery for my macbook pro retina and i keep losing battery life very fast ?
Please help

I've done my research and could not find a decent article for my Macbook Pro Retina Mid2014.
Review these link:
Considerations for the long life of your MacBook. Handling and environmental care tips
The tips helped me out the most compared to the other links that can be found. Not sure why your battery life isn't lasting you though. You may need to get it checked by Apple. Try the Apple Support--if you got yours new, you have 90 days free support.
Thankfully, I never had issues with the battery life but I did replace my first Macbook a few days after purchasing. Thankfully, I was still within 14 days so had it replaced by Best Buy, no question asks as long as you brought everything including receipts.
Out of curiosity, can you click on APPLE logo > About this Mac > System Report > Power
Copy & paste the Battery Information.
For some reason, I am having issues copying & pasting my information.
Charge Information:
Charge Remaining (mAh): 6062
Fully Charged: No
Charging: Yes
Full Charge Capacity (mAh): 8816
Health Information:
Cycle Count: 4
Amperage (mA): 4806
Voltage (mV): 12498
I have my screen dimmed since I don't really like it too bright and I have my keyboards lights off unless it's at night and I need to see the keyboard for whatever reason. There is really no real reason for me to have the keyboard lights on anyway other than to make it looks nice. My laptop had lasted me maybe about 7+ hours (maybe even more) if I get it down really low. I've got it down to 10% the first time I used it just to see and then since then, I've been trying to charge from 30%+ and when I am streaming, I keep it plugged in.
I don't ever plan on leaving it plugged in over night or while on sleep mode for a long period of time. Never do a battery calibration since it's not necessary for the new Macbook Retinas.
Amperage (mA): 4806
Amperage (mA): 4806
Voltage (mV): 12498

What battery type for Tungsten E2?

1) Could someone tell me what battery I need for the Tungsten E2; mine depletes quickly and is now on electrical charge.
2) How mch time do I have to replace it when in the process of battery exchange?. Have Hot synced data to computer, but hope not to lose it on Palm during the process..
Thanks so mch. MC
Post relates to: Tungsten E2

Your Palm has flash memory, that means that when he battery dies or is disconnected, you won't lose your data. Basically, you have eternity to replace it.
As for battery type, you can get one at usedpdaparts.com, eBay or amazon.com under "tungsten e2 battery." (Keep in mind they come in slightly different capacities, the stock one, the high capacity one etc (1050 mAh, 1100 mAh, etc.) Another idea is to buy a decent condition e2 or model with a compatible battery and swap it in. I noticed that an entire PDA seems to be more cost effective than buying individual parts, but thats just my experience.
webosnation.com is another option for help.

Help with making JLabel visible for a few seconds only

Hello guys,
I need help with making a JLabel object visible for a few seconds only and disappear when a JButton has been clicked.
Here is piece of code where I add mouse listener to the JButton object in my case is (jrbFigure1) and
when is called sets icon and text to the JLabel jlbl object:
jrbFigure1.addMouseListener(new MouseAdapter() {
jrbFigure1.addMouseListener(new MouseAdapter() {
public void mouseClicked(MouseEvent e) {
jlbl.setIcon(cross);
jlbl.setText(wrong);
This piece of code is in a switch statement, the statement is in a method.
The JLabel jlbl object is added in a panel in the constructor of the class.
I really hope someone could help me on this issue.
I would like to thank you in advance for any help or advice given.

Bobson wrote:
Sorry for posting my issue twice, I thought, I posted it in a wrong forum:)It's OK. We'll ask the mods to delete the other thread.
I want the label to appear for X seconds when then button is pressed and disappear after that.Then a Swing Timer is what you want to use.
I need to do this in a number of cases from a switch statement because I several buttons.Better to have several ActionListeners, one for each button or each type of button, rather than one ActionListener with a large switch statement, a so-called switch-board listener. They're messy to debug and upgrade.
I tried to use Swing Timer, but I cannot set it properly.Go through the Sun Swing tutorial on Swing Timers. It's all outlined for you there: [http://java.sun.com/docs/books/tutorial/uiswing/misc/timer.html]

Help on Id cs5 forms for Acrobat Pro 9

Hi. I am trying to create an Id cs5 form for import into acrobat pro 9. The form is a Nutrition label, so is very specific in FDA regulations. Therefore I cannot have underscores nor boxes appearing to indicate fields. Am I missing some work around here? Thanks for any help (if the answer is obvious, my apologies. Cannot find any information helping with this, and am relatively new to In design).

You can't actually create a live form in InDesign CS5. That's a new feature in InDesign CS6.
What you have to do is prepare the appearance of form (e.g., boxes which will become text fields) and use the Form Field Recognition feature in Acrobat 9 Pro to turn it into form fields.
There's a lot to learn. Michael Murphy did an Adobe Connect session which was recorded. You can watch it here (you need to have Flash Player installed on your computer to watch):
Episode 53…sort of.

Help with CMOS battery type for K7 Pro

Similar Messages

Maybe you are looking for