Help with cmss-3d audigy 2 NX in win 7

well, i have a problem here. when i installed a fresh win 7, i installed the audigy 2 nx driver, named "USB_W7DRV_LB__0_0099", which is the newest version. at that time before i unpluged it from the usb port, it worked well with all function, cmss-3d, eax ... then i decided to unplug it from the usb port to bring it to my friend house, then back, then plug it again into the exact same usb port as before. however, from now the cmss-3d not working any more. I still can play movies with 5. sound, but the cmss-3d functione makes no effect at all. for example. before I played a song, enable the cmss, that would make sound through all speakers. now i enable/disable, no effect, sound only through front speakers.
i check the control panel/sound and got this message. even i tried to uninstall the usb sound blaster, uninstall driver and reinstall them, still got the same problem
any one can fix this issue? i dont like to reinstall the new win 7.
tks for helping me.

i know mate im having the same problem with that ctregsvr file on mine i get it on startup also my volume icon that creative uses the white and blue icon that vanishes on the odd ocashion but that missing file ctregsvr is doing my head in it says file not found something like that anyway if you crack it let me know

Similar Messages

Help with Sound Blaster Audigy Value 24-bit..keeps crashing when connecting to the inter

pls help..every time i connect to the internet while playing mp3's or just any applications or programs that produces sound and even when streaming some clips through the internet, my computer restarts..any sound that is produced when i am online it will restart..but if i just surf the net without playing anything..it works fine...
how cn i solve this problem..
pls help..thnx
my spec:
AMD Sempron 2400+
Epox 8rda3i
Seagate 80gb
Palit GeForce 6600gt
Creative Sound Blaster Audigy Value 24-bit

screwguy_28 wrote:
is this the one?
IRQ 0 System timer OK
IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM) OK
IRQ 5 Uni'versal Serial Bus (USB) Controller OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 9 SCSI/RAID Host Controller OK
IRQ 0 MPU-40 Compatible MIDI Device OK
IRQ NVIDIA nForce PCI System Management OK
IRQ 2 PS/2 Compatible Mouse OK
IRQ 3 Numeric data processor OK
IRQ 4 Primary IDE Channel OK
IRQ 6 Sound Blaster Audigy OK
IRQ 8 SoftV92 Data Fax Modem OK
IRQ 9 NVIDIA GeForce 6600 GT OK
IRQ 2 Standard OpenHCD USB Host Controller OK
IRQ 22 Standard OpenHCD USB Host Controller OK
Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
jutapa

HELP! Hey, (Yeah YOU!) I need some HELP with an OEM Audigy 2 ZS Platinum Pro SB0360 installat

Hi Everyone.
I'm new here so I'll try to be kind and make lots of helpful friends, especially folks at CL.
Do you like a challenge?
Try this on for size.
My problem.
I'm working on a PC for a doctor friend. It's a Gateway P4 dual 3.0 gHz "Media Center" unit.
He let the antivirus proggie lapse and it was full of spybots, trojans and some missing stuff his kids (he says) had done (little kids like to click on stuff and he has 4 kids under 6 years old...).
Anyway, I needed to re-install the whole system back to the original state. GW2K docs seemed to make that a piece of cake.
Everything went well until the turkeys at GW2K threw me a curve - their CD re-install system just stinks. The CDs don't seem to AUTOSTART very well, the OS looks different than original (fo example - just plain ole XP Home instead of the neat-looking "Media Center" branding on the startup splash page), and then I got to a real problem.
The SB0360 Audigy 2 ZS (Platinum Pro, I think) driver from GW2K installed OK, but the associated apps CD keeps spitting back that it doesn't find a "Sound Blaster" card.
The Device Manager says its a Creative SB Audigy 2 ZS.
I've tried to use updates from CL but they also spit at me - "No Sound Blaster found, Exiting".
It seems that the Plug and Play only likes the GW2K driver, but the Apps CD don't like the "Creative" part, and so it balks. The CL drivers give the same message.
GW2K tells me to contact Creative Labs or (haaaa) SAM'S, the purchasing store.
Talk about the royal runaround...
Anyway, anyone got any good ideas?
I can't seem to find anything on the net to help.
I'm about Google-ed out.
Thanks in advance!
P.S.
I do have sound, Music CDs play fine and Windows sounds work OK.
I just need to install those Audigy Apps from the GW2K CD...
Message Edited by GrimWeeper on 2-02-2004 03:0 AM

Anybody wants to help me ?I wait your answer for my question...!
Thanks

I need help with Boot Camp 2.1! Win XP

I have downloaded the update on Windows XP SP2, but it will not install.
"The installation encountered errors.... Try again at a different time." That's what comes up.
I have tried everything! The command shell thing where you have to type the path of the update file (cmd.exe), I have checked the language code (yes it is 1033) and I have downloaded the files seperately. NOTHING WORKS! I have even re-installed Boot Camp.
I have:
Mac Pro
10.5.4 Leopard
Windows XP SP2
Any help will be appreciated!

I have found a solution!
Well not for installing Boot Camp 2.1 but for installing XP SP3 with Boot Camp 2.0!
I found it on a website but I can't remember which one. But here is what I did.
Start> Run:
Type: regedit
Click "OK"
On the left side of the window there should be a panel with folders name similar to "HKEY_....". Click on:
HKEYLOCALMACHINE> SOFTWARE> Microsoft> Windows> Current Version> Double click "Setup"
On the window should appear a few files next to the panel on the left. The file type should have "REG" then something after it.
Check in the "Name" column that you DO NOT have "BootDir". If you do then this is not the answer for you!
If you don't have that file:
Click EDIT> NEW> STRING VALUE
Name it: BootDir
Right click the file and go to Modify.
Then type in: C:\ and press OK (Or if another drive is your main drive (eg. D) then type in the letter of that drive instead of C (eg. D:\)).
Restart the computer and go into Windows again. Then download the SP3 update in whatever way you have done before.
The installation should continue without the message saying "You need more memory" or something.
FOR WINDOWS XP!

Can anyone help with how to install Java on Win Server 2012 RDS

I am trying to install Java on my RD Host Server and have tried several times to install both the 32 and 64 bit clients. Both complete but when I try to verify, I think the 32-bit version launches, but never fully resolves the applet. I get
a grey box, but nothing more. I have tried several method of installs but nothing seems to work.

technically it should be under install mode but it doesn't really seem to matter in most cases
the most important part is that you allow the java controls to run in IE when prompted, if that's not done then it won't be allowed for your remote desktop users
you can also validate this by going to the manage add-ons section in IE, select all add-ons and look for items under Oracle, make sure they're enabled for all sites in the more info section
once you're confident it's working for you as an admin, then we can tackle any user issues which are usually caused by IE hardening and JRE7's strict security settings which you may also want to look into
personally I've had issues with activex filtering feature and enhanced protected mode options - disable them both

Microphone problems with Audigy 2 ZS/win 7 x64

Hello.
I have very common problem with my soundcard audigy 2 ZS on windows 7 x64 with 8gb RAM. A week ago installed win 7 (was xp before) and noticed that my mic is not working. When I turn on microphone in output device i hear crystal clear sound from headphones, as input device it is not working properly. After reboot it don't work, no reaction on any changes. Usually after 5-20 mins I can hear signal from it (even when I'm not doing anything). Still sound quality is terrible, lots of noises and bugs. So I can't use it. After reboot mic not working again.
My microphone is fine, soundcard also worked on XP without problems (almost all A2ZS users have same problem). The latest drivers was installed on clean, fully updated Win 7 Ultimate. Tried danielK pack. Still no results, this is about 2 years old problem with drivers and I want to know any realistic way to solve it. All post on forum are outdated, or don't have any useful info.

Krookut,
Try these suggested steps when cleansweeping and reinstalling. They may help make the reinstall more successful:
http://us.creative.com/support/kb/ar...asp?l=2&sid=72
Jeremy

Need help with Boot Camp and Win 7

I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp. I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1. That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
Thanks.
Mike

Mike,
I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
https://discussions.apple.com/community/windows_software/boot_camp
Roger

Need help with win 8.1

PLEASE HELP me with my dilemma:
I just installed Win 8.1 and I like it accept
When I work on a project and walk away from
My desk it goes into SLEEP in a few minutes
Then I have to put in my pin number
I tried PC DEVICE AND LOCK SCREEN
then "when plugged in turn off NEVER
Sleep when etc NEVER.
Is there anyway I can eliminate all passwords
and pin numbers. ( I am the only one ever use this PC)
I am a frustrated newbie and need all help I can get.
Any help would be much appreciated
Alex ([Personal Information Removed])

Hi,
Please try:
http://pcsupport.about.com/od/windows-8/fl/auto-logon-windows-8.htm
or
https://www.youtube.com/watch?v=-VOlZl7UmwQ
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

MOVED: need help with finding gpu for win 7

This topic has been moved to MSI Notebook.
https://forum-en.msi.com/index.php?topic=128552.0

Mike,
I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
https://discussions.apple.com/community/windows_software/boot_camp
Roger

Help with Cambridge SoundWorks!!! PLEASE!

Hey, guys, I need some help with configuring my 5.1 Soundworks Speaker System... I can't hear anything out of my rear and center speakers...CMSS is out of the question, as my Creative Audigy(LS?) is plugged in, but the Original CD installer says it's not... I have installed some kind of drivers(the original ones from the cd), but, still, my sound card is "invisible" to the Creative Installer...Please help,
Best regards...

Yes, my Audigy is plugged in correctly... I had these stereo speakers and they worked fine, but the problem was the same! My drivers won't install via the "Installer"... I have the original CD and all that crap, and still nothing! I only placed the Soundcard where it should be, but I don't know if I need any more wires...My speakers are plugged in like in Creative's Surround Demo etc... I'm now using Win2000[No Service Pack](i used, and I think I will revert to, Windows XP[SP])...What I want to know is: Can I use anything other than CMSS? Is there anything that could make an Audigy LS and a Cambridge Soundworks DTT2200 get along fine? Oh, and I have an Abit motherboard... The model is not important, as my speakers, soundcard, motherboard and a hell lot more come from a guy who sold them...And they worked fine on his PC! The biggest problem is with the drivers... I use the first PCI slot for the soundcard and it kinda works.....Please help if you have any idea...

Help with Error -48

Really need some help.
When I sync my ipod with my PC (pentium 1.6G, Win Xp) I get the folloing message:
"Attempting to copy to ipod failed. The disk could not be read from or written to."
That is followed up by a message saying that my ipod is corrupt and quoting error -48.
I have restored my ipod at least 6 times to try to fix this. The wierd thing is each time I do a restore it transfers 2 songs i bought from itunes but not all the CD's I am trying to transfer.
I have looked on the ipod website and there is a fix for this problem but it only applies for Mac not PC's.
Can anyone help.
ps I have latest version of itunes and software for the ipod.
HELP. I'm desperate.
PC 1.6ghz Win Xp Windows XP Pro

let's get your iPod Updater logs to the Apple engineers for a look.
Open this folder:
C:\Documents and Setings\yourusername\Application Data\Apple Computer\iTunes\iPod Updater Logs
(You may need to show hidden files in order to see the Application Data folder. Open up My Computer, and in the Tools menu, choose "Folder Options..." Then go to the View tab, and then in the "Advanced settings", select "Show hidden files and folders.")
Send the files inside the iPod Updater logs folder as attachments to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- The model of iPod you are using, and the current software version on the ipod
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing

Problem with Acrobat 8 Pro on a WIN 7 64bit system

I have installed Acrobat 8 Pro and my Win 7 64bit machine and am having trouble printing web pages to pdf
but can find no exact reason why the just hang in the spooler just saying they encountered an error.
Any help with that?

The updates may resolve the issue. To update you may have to go to ftp://ftp.adobe.com/pub/adobe/acrobat/win/ to get the updates and install them in order.

Help with Flash code in web page

I have a Flash file in the masthead of my web site that shows
a slideshow. I want to code the page so that if the viewer doesn't
have Flashplayer, an alternative jpeg comes up in the masthead
instead of the file with the flash slideshow. I'm afraid I'm new to
most of this.... I'd very much appreciate help with the
programming.
Thank you!
Here's the file:
http://www.ewgaphilly.com/cs3index.html
(the slide show isn't working at the moment -- a server issue). The
alternate file I want to put in is:
http://www.ewgaphilly.com/alternate_mast.jpg

I'm sorry to be so dull on this, but I'd appreciate if you
could tell me specifically which is the embed code (the codes in
the <head>? What to I change here? I really appreciate your
help.
Here is what I get when I publish the movie and the open the
html file:

<html lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>main_slideshow_philly</title>
<script language="JavaScript" type="text/javascript">

</script>
<script language="VBScript" type="text/vbscript">

</script>
<script language="JavaScript1.1"
type="text/javascript">

</script>
</head>
<body bgcolor="#ffffff">


<script language="JavaScript" type="text/javascript">

</script>
<noscript>
// Provide alternate content for browsers that do not
support scripting
// or for those that have scripting disabled.
Alternate HTML content should be placed here. This content
requires the Macromedia Flash Player.
<a href="
http://www.macromedia.com/go/getflash/">Get
Flash</a>
</noscript>
</body>
</html>
Here is my existing code in my home page:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>EWGA Greater Philadelphia Executive Women's Golf
Association</title>
<style type="text/css">

</style>
<script src="Scripts/AC_RunActiveContent.js"
type="text/javascript"></script>
<style type="text/css" media="screen">

</style>
<script type="text/javascript"
src="p7tbm/p7tbmenu.js"></script>
</head>
some other stuff goes in here!!
then...
<script type="text/javascript">
AC_FL_RunContent( 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','wid th','780','height','444','title','EWGA
Greater
Philadelphia','src','/main_slideshow_philly','quality','high','pluginspage','
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movi e','/main_slideshow_philly'
); //end AC code
</script>
<noscript>
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0"
width="780" height="444" title="EWGA Greater Philadelphia">
<param name="movie" value="/main_slideshow_philly.swf"
/>
<param name="quality" value="high" />
<embed src="/main_slideshow_philly.swf" quality="high"
pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
type="application/x-shockwave-flash" width="780"
height="444"></embed>
</object>
</noscript>

HELP DESPERATE CMSS 3d / EAX

HELP> DESPERATE CMSS 3d / EAX? ok the other day i had done somethign to my settings in control panel and when i went ingame (counter-strike .6) it felt like i was actually there i Could hear Everything Everyware and i could pinpoint everything. It kinda felt like i had tincans on my ears. It had a sort of Echo effect like i was in a dome or a cave it was awesome. but i had problems with the drivers and had to reinstall them because Sound kept cutting out here and there. And now i am trying to get taht same effect again and i've tried everything. CMSS is enabled on my headphones and i select EAX support on cs i have EAX effects checked in CP and crystalizer on and still no " I FEEL THERE" effect and i kinda just feels liek flat sound liek when someones shooting from acroosss the map its eitehr infront of me on the side or right next to me and i cant pinpoint anything the sound is basicly FLAT.(either left or right? or center and i have to turn ingame to pinpoint were its coming from). Help Would be greatly appreciated i've been trying to get this to work for about 2 hours straight now. And thansk for listing to my story.
EDIT: im trying to get it to sound like ENVIRONMENT FX LIKE IM THERE So im guessing EAX is not working for me?

$Re: HELP> DESPERATE CMSS 3d / EAX? I have Vista Ultimate. If you have XP then you will not see that. Sorry for the misinformation.
I guess Counter Strike is not EAX so CMSS 3D may be the best option.
Have you tried going to CMSS 3D and selecting (or deselecting) "Macro FX" and "Elevation Filter"?
http://www.creative.com/products/sou..._Headphone.swf
Also, since you recently installed everything again the onboard sound may be acti've.
Did you disable onboard sound? Here is a link. Go to step 2. You may have to copy and paste the link. It is SID 4233
<a target="_blank" rel="nofollow"]http://support.creative.com/kb/showarticle.aspx?sid=4233&Question306=obj(306)bj(2397[/url])

Help with Solaris 10

Hello,
I just got ahold of a SunBlade 100 system (that's having video problems, I already posted what the problem is in the Hardware section) and I would like some help with Solaris 10. I have never used Sun before, and I figured why not get a machine and start learning. =)
Anyways, I do alot of web design and networking...on Mac's though.
I'm setting this system up on a Rack along with a Win Xp box, a Mac G4, and a Linux Mint machine.
I also have two of these Scsi towers that came with the Sun System. They can each hold I believe 8-10 Drives each? Not sure..that i want to setup at a later time.
My questin is this. I'd like to run websites off my Sun system. But i'm not sure how to transfer my files from iWeb to the Sun, and how to control the sites on the system, as well as turning the site on, off, etc.
I'd also like to store music on it as well. Because I can have alot of Scsi drives, i figured I can get quite large amount of storage for songs. I'd like to set it up to where I can give someone a login information and a website (ex. myuploadsite.net) and they can go in, and upload there music. But, I'd like to make it to where I can make the website in iWeb, and run it off the Sun system, and store all the files on the Sun as well.
And my last question is this. How do I remote desktop to a Sun System from a Mac. I'm using Apple Remote Desktop, and the way the rack is setup, is that I remote connect to the Xp, linux, and Mac box's (saves monitors, and space. =), and also because I'm usually never home...
Thanks in advance for the help!
Oh, and if anyone has a Instant Messanger and wouldn't mind having a chat with me, that would be great.

hi all
1st of all, thank u for support...
then i need some explaination for the installation of 119090-25 (iscsi driver + target) installation
this patch requrires kernel patch (118833-36-1) that requires 3 other patches 118918-13, 119042-09 and 119578-30
now i have some questions for kernel installation patch... on my server is running oracle and i ask if this upgrade should give some problem with services running.
could u guide me through this adventure? I repeat i'm totally newbie and i'm reading as much as possible to understand as best i can solaris 10
thank u
sorry for my english

Help with cmss-3d audigy 2 NX in win 7

Similar Messages

Maybe you are looking for