Help with Collages in Elements 10

I am trying to make a photo collage in Elements 10, but no matter what horizontal layout that I pick, the layout always comes up vertical! I need to work in the horizontal layout. Can anyone help me??

Don't use Create. Just make a new blank file in the editor the size and orientation that you want, then bring up the Content panel (window>content) and add what you want from there. In PSE 10 there is absolutely nothing you can do in a Create collage that you can't do in the editor, too, and usually much more easily.

Similar Messages

Need help with Adobe Premiere Elements 2

I can drag a large high rez jpeg into timeline. Then when I click to playback....it gets more pixelated. That's a bad beginning. Then, when I go to export it, I've tried several extensions. All look bad during playback on YouTube. This should be pretty simple. High quality jpeg, but is fuzzy in movie. What's going wrong?

hi Bill -
ok fine. I have PSDs too. I tried what you said.
I put a PSD right beside a JPEG in the timeline. I rendered it (which I
didn't know to do because the instructions don't even mention it. The
instructions are terrible. Seems it leaves out a lot of info.)
So, then I click PLAY on my monitor. I see no difference between the PSD
and the JPEG yet. So, if I want to put this on YouTube, what's the best way
exactly, without gettting too technical? It looks like I have the choice
between Exporting in Mpeg or Quicktime or Windows Media. I think youtube
likes wmv.
From: Bill Hunt <[email protected]>
To: Tommy Midyette <[email protected]>
Date: 6/3/2010 10:01:24 AM
Subject: need help with Adobe Premiere Elements 2
>
When you drag the stills to the Timeline, there should be a red line
above them. Press Enter to Render the Timeline.
Â
Do not know the particulars of PrE 2, but in later versions, you can
Rt-click on the Program Monitor, and choose Magnification = 100%, rather
than Fit. You might have to resize your Program Monitor, but check at 100%.
Â
Also remember a few points:
Â
1.) You are looking at a DVD-quality image now, and that was designed
with low-rez CRT TV's in mind, and NOT hi-rez computer monitors. DVD vs
hi-rez sources and displays is probably less than what VHS vs DVD was, not
that long ago.
2.) You are looking at an emulation, a preview
3.) Your images have already been compressed to JPEG once, loosing
quality. That is why I always work in PSD, especially if there has already
been one JPEG compression, whether in camera, or in the image processing
stage. I keep JPEG either out of my workflow, or as limited, as is
possible. Some do not see the quality loss with JPEG compression, but I do,
and if I can create images that are as good as it gets, I know that my
clients will be happy.
Â
Good luck,
Â
Hunt
>

Help with Network UI Element

My application has a need for the Network UI Element. We've been able to get the element initialized however I don't know how to access the element.
For example, I assigned an action to the NodeSelected, but when I select a node, the method is not called.
Also, once the user changes the layout, how do I get the results so I can write them back to the xml file?
Any help woule be appreciated. A tutorial link for the Network element would be ideal.
Thanks.

I've made some progress with this (it's back in scope) however now I am having a problem that with the Network element on the screen, my page "freezes" on reload.
My setup is like this:
wdContext
--> DataSourceNode (1:1)
--> DataSource (type Resource)
The DataSource node has a supply function named supplyDataSource. In this function I connect to the xml document and create the resource from the input stream. This works fine, the chart is displayed.
However now when I click on a button (which displays a popup window for search) the chart updates, but my window never opens, I just get the "loading" animated icon, but no window.
Any ideas? If there is additional information needed, please let me know.
Thanks.

Help with Adobe Premiere Elements 8.0

Hello!
I recently began fooling around with Premiere elements and I had a couple of questions about it: First, if you could please watch this video: http://www.youtube.com/user/iTerabithia#p/search/6/01qfQSyq1WI In the almost beginning it shows Lucy hug Edmund and then a shot of Lucy crying fades into it and then out again. Do you know how to do that with Adobe Premiere Elements? And also, how is that color achieved from the very beginning of the video? And is there any way to do audio effects? If you could please answer these questions I would appreciate it ever so much!
Thanks!

John T.,
Thanks. I should have added that info.
What does that little "scene" look like to you? I'm thinking a Video Clip on a higher Video Track, and maybe with less that 100% Opacity. Guess that if it covers the whole Frame, it would not be a PiP, officially, but would involve the same principles.
Appreciated,
Hunt - who sometimes gets lost in acronyms and jargon!

Help with Photoshop Premiere Elements 13 not loading

I have asked this question now three times with no answer. The troubleshooting website goes round in circles so there is only a forum to get help? I am so frustrated with the whole thing and if I dont get this osrted then I have no option but to send it back.
i have got premiere elements 13 and can only get as far as the organizer. The Editor wont load and keeps asking me to sign in and when I do sign in it just doesnt do anything
Please can someone from Adobe get back to me. I am supposed tio get support and so far havent hardly had any
There is a chat that someone called Amir asked tio take over my computer!!! Is this real?
Please help

Thank you for replying JOhn. Im new to this
If I click still need help, I then get NEED HELP? START HER TO GET SUPPORT
First we need a few details
I answer the few details and ot takes me back to the same place again?
No chat
There is what are my options so if i click this it comes up with What are my contact options and there is chat there but its greyed out so I am not able to select
The only method is forums
There is a blue square with Ready rto contact us?Start here
I click that and I am back to NEED HELP? START HERE TO GET SUPPORT
first WE NEED A FEW DETAILS
I am totally lost
Do you know how I can get to speak to somebody or chat to somebody?
I tried to chat to somebody last night and they wanted to log into my computer!!!
Help!!

Help with Adobe Premiere Elements 11 Editor - Won't work after Maverick upgrade

I bought Adobe Elements 11 in March of 2013. It was working fine until upgrading to Maverick. It will not open now. Adobe will not help without a serial number. Apple does not provide serial numbers when you buy directly from the App Store. After 3 hours of trying to unintall and reinstall, no luck. Apple said to call Adobe back, Adobe says to call Apple. Finally just asked Apple to refund me the $85.00. They said said they ‘can’t’ since I’ve ‘had it for so long’ (7 months ?? ). They said the problem was my fault because I didn’t check and make sure Adobe Elements was compatible with Maverick before installing Maverick. I should mention that it states (on the App Store page) that Adobe Elements 11 is "compatible with OS X 10.7.5 or later”.   Just wondering if anyone else has experienced this problem and if any kind of resolution was achieved?   Again, any help would be greatly appreciated.
Tony

Yes and no help.
See discussion
Please visit http://www.adobe.com/support/contact if there are more questions for Adobe. Thank you.
General Info
Chat start time      Dec 13, 2013 6:52:37 AM EST
Chat end time      Dec 13, 2013 7:08:55 AM EST
Duration (actual chatting time)      00:16:18
Operator      Vaibhav
Chat Transcript
info: Hi, there are several customer(s) in line ahead of you. We'll be with you as soon as possible. Thank you for your patience.
You might also try our community forums, where experts are online 24/7.
info: You are now chatting with 'Vaibhav'
Vaibhav: Hello. Welcome to Adobe Technical Support.
Vaibhav: Please allow me a moment while I look into your account & verify the details.
Jerry: okay will wait
Vaibhav: Can you elaborate the issue please?
Jerry: I've been trying to open the app, its does not open it give me an error
Vaibhav: Well we are getting many customer with this issue
Vaibhav: premiere elements 11 is not compatible with MAC 10.9
Jerry: okay what are you doing to resolve the problem
Vaibhav: Well if there will be any update we would inform all the customers right now we have send this to engineering
Jerry: A friend of mine was sent a link that allowed them to reinstall the application and they were also given a serial number as well can't you do the same for me I really need to use this application asap
Vaibhav: for this you need to contact customer services or sales
Jerry: I'm not looking into buying a new copy I NEED HELP!!!!!!
Vaibhav: Well we can not help in this case as this version was released before mac 10.9
Vaibhav: and if you want to use it on MAC 10.9 you would need to purchase Premiere Elements 12 and for that need to contact sales
Jerry: It looks like I am not going to get the same help as every one,just no that you've lost a customer in me
Vaibhav: Well there is nothing that we on chat or phone can do in this
Vaibhav: Thank you for contacting Adobe. Good Bye.
info: Your chat transcript will be sent to [email protected] at the end of your chat.

Need Help With Adobe Photoshop Elements 2.0

I have and use Adobe Acrobat and three versions of Adobe Photoshop Elements (2, 5 and 7). I use version 2 frequently as I'm more familiar with it and it's simpler to use for what I need to do. All was fine until recently when my computer was installed with Windows 8. Now I can't save photo edits from Version 2.0...... it aborts each time I try. Why is that? It is costing me a lot of wasted time. The other versions that i have don't do that. Need help. Thanks. Stu Snyder.

The first thing i would try is deleting the Photoshop Elements 2.0 Prefs folder as explained in the post #2 linked to below:
http://forums.adobe.com/thread/1254224?tstart=30
Does it happen when trying to save as any file format or just a certain one like jpeg?
Have you tried saving a photo to a different place like your desktop?

Help With Adobe Photoshop Elements Download and Installation

I purchased Adobe Photoshop Elements yesterday and was sent the download link. I tried to download the product but one of the 2 files I need would not download and after a few attempts it blocked my access saying there were too many download attempts. Please help.

if you follow all 7 steps you can directly download a trial here: Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

Help with installing photoshop elements 8 on vista

Hello all,
I am hoping someone will be able to help me..
I have purchased a copy of photoshop elements 8 from our local pc Store..
I have been trying to install it for days..
It starts off ok and then when I think its just completing it come up with a error saying... Photoshop was unable to install as it was interupted..
I have tried lots of things but nothing seem to work.. any advice would be brillant as I pulling my hair out here...

Hi sonynut,
Please review and follow the steps in below tech notes and see if they helps:
http://kb2.adobe.com/cps/408/kb408850.html - follow the steps in here first then move on to next one, if needed.
http://kb2.adobe.com/cps/405/kb405398.html
Regards,
Ankush

I need help with greenscreen for Elements 12

I purchased Adobe Elements 12 at best buy after a discussion with the associate that i needed a program to work with my greenscreen. He said adobe elements 12 was the perfect match and how easy it was to work with a greenscreen. Unless i'm stupid he lied. I spent 4 hours last night fighting with the program and searching the net for help. so far as far as i can tell i was lied to and i have to spend more money to make this work. am i missing something that is really easy and in my face or does elements 12 suck for greenscree?

Just Google:
"green screen photoshop elements"
and you'll find many tutorials about this.
Another similar post:
http://forums.adobe.com/message/6200948

Need help with Adobe Premiere Elements 9 for the Windows XP PC

Just got it today, so I could make my own video and audio files from pre-existing ones. I first used a version of Adobe Premiere back in school in the '90s, and seemed to easily make them there, while not working on school work. There was a row for inserted video, and a row below that for inserted audio. I'm out of college currently, and just bought Elements 9, as said, but am struggling with it. Could someone please tutor me to get me started? Perhaps even talk over the phone? I'm trying to combine different video and audio tracks into a new singular video/audio file.
Thanks in advance.
>>
Welcome to the forum, but unfortunately, you have posted to the Premiere Pro, CS 4 and Earlier forum.
Instead, you should post to the PrElements Forum, as few here will know anything about PrE 9.
Now, the starting secret of PrE is your Source Files. Can you tell us the full details of those?
Next, matching those to the correct Project Preset, is the next step. Can you tell us what you chose at New Project?
For a list of some of the resources for learning PrE, see this ARTICLE.
Good luck,
Hunt
>>
What are Source Files? You mean the videos I'm using? The main one is here:
http://www.tfarchive.com/cartoons/videoclips/bones.php
Two to four additions to it will be used with video parts from here:
http://www.tfarchive.com/cartoons/videoclips/us_commercials.php
And my first project is a .prel file. Is that what you meant?
Is it possible I could get assistance over the phone?
Thanks.

I created a more precise list of what I wish to combine to make one new video program:
Audio:
http://www.tfarchive.com/cartoons/videoclips/bones.php
Transformers_S2.mpg (0:00 - 0:33) (All)
Video:
http://www.tfarchive.com/cartoons/videoclips/bones.php
Transformers_S2.mpg (0:00 - 0:08)
Fade to
Transformers_S2.mpg (0:31 - 0:33)
Fade to
http://www.tfarchive.com/cartoons/videoclips/us_commercials.php
Rodimus.mpg (0:00- 0:08) (Note: Should start after grey jet passes by on top of screen (less than a second in), and stop after blue robot tramples over the other two robots, cutting off the part where he's shot at from the sky, and all that afterward.)
http://www.youtube.com/watch?v=5yd1OmZvU8w
(1:34 - 1:38) (Note: Should start as soon as video beings, and end when the four side robots are shooting their laser guns, and the one in the middle shoots his shoulder-cannons, cutting off the part with the bridge and missiles, and everything else afterward.)
http://www.tfarchive.com/cartoons/videoclips/us_commercials.php
trypt.mpg (0:15 - 0:16) (Note: Only shows the brief second or two where the five robots quickly transform to one big robot.)
http://www.youtube.com/watch?v=h23kRJ9i058
(5:22 - 5:25) (Note: Should start with all 5 robots appearing onscreen, and end with them, in a combined robot, firing at the screen, cutting off the white laser-shooting base/battle-station and everything else afterward.)
http://www.tfarchive.com/cartoons/videoclips/bones.php
Transformers_S2.mpg (0:23 - 0:33) (Note: Should start with lava-flowing ending, and lined-walkway appears, and goes to the end.)
Not sure if I can get all of these videos in, in the 33 second time limit. I'm willing to cut either the trypt.mpg clip, and/or the youtube link-clip below it.
I have a youtube downloader program, so no worries there. Also need to know how to cut video so I can make these clips that are from youtube and tfarchive.
I also want the video to contain the same quality as shown from each file here, and all fit the size of the largest file (the youtube one, I think it is).
Please LMK how to do this, and if any of this is unclear. Things like this are all I really want to use APE9 for, so I won't be asking much else here.
Thanks.

Help with Adobe Premiere Elements window appearing!

I've owned Adobe Premiere Elements 4.0 for about 5 or 6 years now. I still have the original disc and serial number. I installed it on my laptop (Sony Vaio bought in 2009. Runs on Vista), and when I open the program up and click on "files and folders" and double click on a video, I keep getting a pop-up saying "Adobe Premiere Elements is not working." And then the program closes. It frustrates me. I can't afford a new update. Anyway this can be fixed? It never did this to me on my old laptop which I do not have anymore. Thank you for your time.

blaqk
Before you focus on the Premiere Elements 4 itself, let us look at the computer environment and the properties of the video that you are importing into the project.
1. Given you have Premiere Elements 4. Is it installed on Windows Vista 32 or 64 bit?
2. What are the properties of this video that you are importing into the new project and what have you set as the project preset to match the properties of that source media?...I am looking for video and audio compression, frame size, frame rate, interlaced or progressive, file extension, pixel aspect ratio, duration. If you were to import a few jpg photos into a new project would that shut down the project/program as well?
3. Do you have the latest verision of QuickTime installed on your computer with Premiere Elements 4? Do you have the program set for Run As Administrator and set to run from a User Account with Administrative Privileges?
4. Is your video card driver version up to date according to the web site of the manufacturer of the video card?
5. Is your computer optimized with a program such as ccleaner (regular cleaner and registry cleaner)?
http://www.piriform.com/ccleaner
6. Please describe your computer resources?
Let us start here and then we can decide what next based on your details.
Thanks.
ATR

Help with Adobe PS Elements 10~

I was having some problems w/ my Mac harddrive and Adobe PS was not opening. I uninstalled (so I thought) the program and when I tried to reinstall it, it keeps saying there are erros. I have NO idea what to do.. Any tips or help would be very much appreciated.. I am learning how to use MAC and this is so frustrating!

I would recommend you review your installation log to determine what errors you are receiving. You can find details on how to accomplish this at Troubleshoot install using logs | Elements - http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html.

Help with cloning an element

I've included a screenshot.
http://imgur.com/SpZsCbB
Basically, what I'm trying to do is "rebuild" the house in the picture so that the garage is eliminated from the shot (covered in stucco like the rest of the house). I'm having issues doing this, and I'm sure there's several ways to go about it (as there usually are).
Any help from the community is appreciated; thanks in advance!
Tim

Thans for the response; the camera does not move; the whole shot is static. I thought about simply using Photoshop, but I assume (dangerous word, I know) that it would look "weird", since I'd be meshing a still image with a moving, grainy one.

Can anyone help with Adobe Photoshop Elements 13 installation?

I initially tried the free trial of Photoshop Elements 13, but it wouldn't install. When I received an email suggesting I purchase the product on sale for USD 70. (ending January 3) I purchased it, and have now paid for it and received a serial number. On January 3, when I tried to install it, I was told downloading, extraction and installation were complete, but then it quit. I tried again, but only got as far as 'download complete.' I clicked on 'open bundle,' then got message beginning: "The file archive part of Adobe Photoshop Elements is missing..." I repeated the process and got the same message.
On January 5 I paid a computer professional to install it. He got it working and I actually worked on a couple of images, but it quit after about fifteen minutes, and I am getting the above message again.

if you follow all 7 steps you can directly download a trial here: Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

Help with Collages in Elements 10

Similar Messages

Maybe you are looking for