Help with configuring docx - PDF conversion needed
Hi all,
Problem is: pdf is created but it is not pdf, files are just renamed to .pdf
I have following environment
- centos 5.6
- WLS 10.3.5.0
- UCM 11gR1-11.1.1.5.0-idcprod1-110413T184243 (Build:7.3.2.182)
- IBR Version:11gR1-11.1.1.5.0-idcprod1-110413T184243 (Build:7.3.2.182)
- Enabled PDFExportConverter on IBR.
- Checked "Convert to PDF using PDF Export" on "primary web rendition"
- Configured IBR to convert doc and docx files to pdf.
When i checkin new docx, following data is written to agent log:
Log entry for conversion job '77':
Starting to convert: Input File = '/opt/middleware/user_projects/domains/wcs_domain/ucm/ibr/vault/~temp/itdl267tempitlocal16200/77/881.docx' Output File = '/opt/middleware/user_projects/domains/wcs_domain/ucm/ibr/vault/~temp/itdl267tempitlocal16200/77/itdl267hki000884~1.docx' Conversion Type = 'Word' Content ID = 'ITDL267HKI000884' Title = 'test444'
Info 11/1/11 8:27 AM Log entry for conversion job '77':
Started PDFExport step.
Info 11/1/11 8:27 AM Log entry for conversion job '77':
Creating PDF
Writing PDF Export resource file.
Launching PDF Export
Info 11/1/11 8:27 AM Log entry for conversion job '77':
Step PDFExport completed.
Info 11/1/11 8:27 AM Log entry for conversion job '77':
Success
Conversion history says Success.
However, the file is not converted to pdf, it is only renamed to .pdf. If i download the file and rename it back to .docx it opens in office just fine.
Thank you in advance,
-hk
Below is also the console output of operation:
refperformance/6 11.01 08:27:23.609 IdcServer-4768 job progress for: 77 -- accepting job
refperformance/6 11.01 08:27:23.611 IdcServer-4768 job progress for: 77 -- putting in preconversion queue
refinery/6 11.01 08:27:23.686 IdcServer-4769 entered m_postConvertedJobsTable edit with action: COPYJOBS; on jobID:
refperformance/6 11.01 08:27:27.904 Job_77_itdl267tempitlocal16200 job progress for: 77 -- starting conversion
refsteplogic/6 11.01 08:27:27.905 Job_77_itdl267tempitlocal16200 Loading data for step: PDFExport
refsteplogic/6 11.01 08:27:27.905 Job_77_itdl267tempitlocal16200 Secondary Conversion step: PDFExport
refinery/6 11.01 08:27:27.906 Job_77_itdl267tempitlocal16200 starting conversion: WORD; is subconversion: false
refinery/6 11.01 08:27:27.907 Job_77_itdl267tempitlocal16200 Script: TRUE
refinery/6 11.01 08:27:27.907 Job_77_itdl267tempitlocal16200 Evaluated to: TRUE
refinery/6 11.01 08:27:27.907 Job_77_itdl267tempitlocal16200 Script: ExecuteSubconversion<$subConversion="MSOffice",msOfficeApp="WORD"$>
refinery/6 11.01 08:27:27.907 Job_77_itdl267tempitlocal16200 Evaluated to: ExecuteSubconversion
refsteplogic/6 11.01 08:27:27.909 Job_77_itdl267tempitlocal16200 Loading data for step: ExecuteSubconversion
refsteplogic/6 11.01 08:27:27.909 Job_77_itdl267tempitlocal16200 No timeout name was passed....using: DefaultTimeout
refinery/6 11.01 08:27:27.909 Job_77_itdl267tempitlocal16200 Starting step: ExecuteSubconversion
refsteplogic/6 11.01 08:27:27.909 Job_77_itdl267tempitlocal16200 Loading data for step: ExecuteSubconversion
refsteplogic/6 11.01 08:27:27.909 Job_77_itdl267tempitlocal16200 No timeout name was passed....using: DefaultTimeout
refinery/6 11.01 08:27:27.910 Job_77_itdl267tempitlocal16200 Script: ignoreStatus
refinery/6 11.01 08:27:27.910 Job_77_itdl267tempitlocal16200 Evaluated to: ignoreStatus
refinery/6 11.01 08:27:27.910 Job_77_itdl267tempitlocal16200 Script: <$subConversion$>
refinery/6 11.01 08:27:27.910 Job_77_itdl267tempitlocal16200 Evaluated to: MSOffice
refinery/6 11.01 08:27:27.910 Job_77_itdl267tempitlocal16200 starting conversion: MSOFFICE; is subconversion: true
refinery/6 11.01 08:27:27.910 Job_77_itdl267tempitlocal16200 Script: TRUE
refinery/6 11.01 08:27:27.910 Job_77_itdl267tempitlocal16200 Evaluated to: TRUE
refinery/6 11.01 08:27:27.911 Job_77_itdl267tempitlocal16200 Script: ExecuteSubconversion<$stepsToWebviewable="MSOfficeToPostscript, PostscriptToPDF, ExecuteSubconversion<$subConversion='CreateThumbnail'$>", subConversion="UniversalConversion", supportsOIX="true", supportsXX="true", supportsOO="true", supportsIX="true"$>
refinery/6 11.01 08:27:27.911 Job_77_itdl267tempitlocal16200 Evaluated to: ExecuteSubconversion
refsteplogic/6 11.01 08:27:27.911 Job_77_itdl267tempitlocal16200 Loading data for step: ExecuteSubconversion
refsteplogic/6 11.01 08:27:27.911 Job_77_itdl267tempitlocal16200 No timeout name was passed....using: DefaultTimeout
refinery/6 11.01 08:27:27.911 Job_77_itdl267tempitlocal16200 Starting step: ExecuteSubconversion
refsteplogic/6 11.01 08:27:27.911 Job_77_itdl267tempitlocal16200 Loading data for step: ExecuteSubconversion
refsteplogic/6 11.01 08:27:27.911 Job_77_itdl267tempitlocal16200 No timeout name was passed....using: DefaultTimeout
refinery/6 11.01 08:27:27.911 Job_77_itdl267tempitlocal16200 Script: ignoreStatus
refinery/6 11.01 08:27:27.911 Job_77_itdl267tempitlocal16200 Evaluated to: ignoreStatus
refinery/6 11.01 08:27:27.912 Job_77_itdl267tempitlocal16200 Script: <$subConversion$>
refinery/6 11.01 08:27:27.912 Job_77_itdl267tempitlocal16200 Evaluated to: UniversalConversion
refinery/6 11.01 08:27:27.912 Job_77_itdl267tempitlocal16200 starting conversion: UNIVERSALCONVERSION; is subconversion: true
refinery/6 11.01 08:27:27.912 Job_77_itdl267tempitlocal16200 Script: TRUE
refinery/6 11.01 08:27:27.912 Job_77_itdl267tempitlocal16200 Evaluated to: TRUE
refsteplogic/6 11.01 08:27:27.912 Job_77_itdl267tempitlocal16200 processing Direct PDF Export
refsteplogic/6 11.01 08:27:27.912 Job_77_itdl267tempitlocal16200 PrimaryWebviewable is 'ExportPDF' with current stepsToWebviewable set '' setting subConversion to 'Direct PDFExport' and setting conversionSet to 'true'
refsteplogic/6 11.01 08:27:27.912 Job_77_itdl267tempitlocal16200 XML rendition steps not defined
refinery/6 11.01 08:27:27.912 Job_77_itdl267tempitlocal16200 Script: <$include universal_conversion$>
refinery/6 11.01 08:27:27.912 Job_77_itdl267tempitlocal16200 Evaluated to: ExecuteSubconversion
refinery/6 11.01 08:27:27.912 Job_77_itdl267tempitlocal16200
refinery/6 11.01 08:27:27.912 Job_77_itdl267tempitlocal16200
refinery/6 11.01 08:27:27.912 Job_77_itdl267tempitlocal16200 ,
refsteplogic/6 11.01 08:27:27.913 Job_77_itdl267tempitlocal16200 Loading data for step: ExecuteSubconversion
refsteplogic/6 11.01 08:27:27.913 Job_77_itdl267tempitlocal16200 No timeout name was passed....using: DefaultTimeout
refinery/6 11.01 08:27:27.913 Job_77_itdl267tempitlocal16200 Starting step: ExecuteSubconversion
refsteplogic/6 11.01 08:27:27.913 Job_77_itdl267tempitlocal16200 Loading data for step: ExecuteSubconversion
refsteplogic/6 11.01 08:27:27.913 Job_77_itdl267tempitlocal16200 No timeout name was passed....using: DefaultTimeout
refinery/6 11.01 08:27:27.913 Job_77_itdl267tempitlocal16200 Script: ignoreStatus
refinery/6 11.01 08:27:27.913 Job_77_itdl267tempitlocal16200 Evaluated to: ignoreStatus
refinery/6 11.01 08:27:27.913 Job_77_itdl267tempitlocal16200 Script: <$subConversion$>
refinery/6 11.01 08:27:27.913 Job_77_itdl267tempitlocal16200 Evaluated to: Direct PDFExport
refinery/6 11.01 08:27:27.914 Job_77_itdl267tempitlocal16200 starting conversion: DIRECT PDFEXPORT; is subconversion: true
refinery/6 11.01 08:27:27.914 Job_77_itdl267tempitlocal16200 Script: true
refinery/6 11.01 08:27:27.914 Job_77_itdl267tempitlocal16200 Evaluated to: true
refinery/6 11.01 08:27:27.914 Job_77_itdl267tempitlocal16200 Script: PDFExport, ExecuteSubconversion<$subConversion='CreateThumbnail', supportsIX='true'$>
refinery/6 11.01 08:27:27.914 Job_77_itdl267tempitlocal16200 Evaluated to: PDFExport, ExecuteSubconversion
refsteplogic/6 11.01 08:27:27.914 Job_77_itdl267tempitlocal16200 Loading data for step: PDFExport
refinery/6 11.01 08:27:27.914 Job_77_itdl267tempitlocal16200 Starting step: PDFExport
refsteplogic/6 11.01 08:27:27.914 Job_77_itdl267tempitlocal16200 Loading data for step: PDFExport
refinery/6 11.01 08:27:27.915 Job_77_itdl267tempitlocal16200 Script: onErrorFail, producesRequiredWebviewable
refinery/6 11.01 08:27:27.915 Job_77_itdl267tempitlocal16200 Evaluated to: onErrorFail, producesRequiredWebviewable
refinery/6 11.01 08:27:27.916 Job_77_itdl267tempitlocal16200 export parameter 'preferoitrendering' was overridden with value: false
refinery/6 11.01 08:27:27.916 Job_77_itdl267tempitlocal16200 export parameter 'dbshowheadings' was overridden with value: false
refinery/6 11.01 08:27:27.916 Job_77_itdl267tempitlocal16200 export parameter 'defaultmarginbottom' was overridden with value: 1440
refinery/6 11.01 08:27:27.916 Job_77_itdl267tempitlocal16200 export parameter 'defaultheight' was overridden with value: 11
refinery/6 11.01 08:27:27.916 Job_77_itdl267tempitlocal16200 export parameter 'timezone' was overridden with value: 0
refinery/6 11.01 08:27:27.917 Job_77_itdl267tempitlocal16200 export parameter 'watermarkpath' was skipped, no value set
refinery/6 11.01 08:27:27.917 Job_77_itdl267tempitlocal16200 export parameter 'ssdirection' was overridden with value: AcrossandDown
refinery/6 11.01 08:27:27.917 Job_77_itdl267tempitlocal16200 export parameter 'ssshowgridlines' was overridden with value: false
refinery/6 11.01 08:27:27.917 Job_77_itdl267tempitlocal16200 export parameter 'compress' was overridden with value: true
refinery/6 11.01 08:27:27.917 Job_77_itdl267tempitlocal16200 export parameter 'dolinearization' was overridden with value: false
refinery/6 11.01 08:27:27.917 Job_77_itdl267tempitlocal16200 export parameter 'defaultwidth' was overridden with value: 8.5
refinery/6 11.01 08:27:27.917 Job_77_itdl267tempitlocal16200 export parameter 'embedfonts' was overridden with value: true
refinery/6 11.01 08:27:27.917 Job_77_itdl267tempitlocal16200 export parameter 'defaultmarginleft' was overridden with value: 1440
refinery/6 11.01 08:27:27.917 Job_77_itdl267tempitlocal16200 export parameter 'usedocpagesettings' was overridden with value: true
refinery/6 11.01 08:27:27.917 Job_77_itdl267tempitlocal16200 export parameter 'defaultmarginright' was overridden with value: 1440
refinery/6 11.01 08:27:27.917 Job_77_itdl267tempitlocal16200 export parameter 'defaultmargintop' was overridden with value: 1440
refinery/6 11.01 08:27:27.917 Job_77_itdl267tempitlocal16200 export parameter 'dbshowgridlines' was overridden with value: false
refinery/6 11.01 08:27:27.917 Job_77_itdl267tempitlocal16200 export parameter 'fontdirectory' was overridden with value: /usr/share/fonts/msttcorefonts/
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 export parameter 'exportstartpage' was overridden with value: 1
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 export parameter 'ssshowheadings' was overridden with value: false
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 extra px parameters: null
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 contents of /opt/middleware/user_projects/domains/wcs_domain/ucm/ibr/vault/~temp/itdl267tempitlocal16200/77/px.cfg
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 maxssdbpageheight 0
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 exportendpage 0
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 watermarkiotype unix
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 defaultmarginright 1440
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 ssshowgridlines false
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 mimeheader standard
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 enablewatermark false
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 outputid FI_PDFA
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 timezone 0
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 fallbackformat FI_TEXT
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 ssscalexhigh 1
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 tempdir /opt/middleware/user_projects/domains/wcs_domain/ucm/ibr/vault/~temp/itdl267tempitlocal16200/77/
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 ssscalepercent 100
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 readbuffersize 2
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 dolinearization false
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 graphicoutputdpi 72
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 graphicheightlimit 0
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 dbshowheadings false
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 lzwcompression enabled
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 compress true
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 defaultmarginleft 1440
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 jpegcompression enabled
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 defaultinputcharset utf8
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 ssdirection AcrossandDown
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 dbfittopage NoScaling
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 embedfonts true
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 watermarkposition offsetfromcenter
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 horizontalpos 1440
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 defaultprintfontface Arial
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 whattoexport all
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 graphicwidthlimit 0
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 defaultprintfonttype 0
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 verticalpos 1440
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 tempbuffersize 2048
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 defaultprintfontheight 20
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 dbshowgridlines false
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 usedocpagesettings true
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 defaultmargintop 1440
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 ssscalexwide 1
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 defaultmarginbottom 1440
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 preferoitrendering false
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 mapbuffersize 8192
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 showhiddenssdata no
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 unmappablechar 0x002A
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 ssfittopage NoScaling
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 isodateformatting no
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 fiflags SCCUT_FI_EXTENDEDTEST
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 fontdirectory /usr/share/fonts/msttcorefonts/
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 exportstartpage 1
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 watermarkscalepercent 100
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 ssshowheadings false
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 maxssdbpagewidth 0
refinery/6 11.01 08:27:27.918 Job_77_itdl267tempitlocal16200 watermarkscale ScaletoPercent
refinery/6 11.01 08:27:27.919 Job_77_itdl267tempitlocal16200 Launching exsimple with: /opt/middleware/user_projects/domains/wcs_domain/ucm/ibr/vault/~temp/itdl267tempitlocal16200/77/881.docx /opt/middleware/user_projects/domains/wcs_domain/ucm/ibr/vault/~temp/itdl267tempitlocal16200/77/itdl267hki000884~1.pdf /opt/middleware/user_projects/domains/wcs_domain/ucm/ibr/vault/~temp/itdl267tempitlocal16200/77/px.cfg
refinery/6 11.01 08:27:27.919 Job_77_itdl267tempitlocal16200 working directory: /opt/middleware/Oracle_ECM1/ucm/idc/components/ContentAccess-linux/linux/lib/contentaccess/
refinery/6 11.01 08:27:27.919 Job_77_itdl267tempitlocal16200 There are 3 environment vars set for this process
refinery/6 11.01 08:27:27.919 Job_77_itdl267tempitlocal16200 LD_LIBRARY_PATH=/opt/middleware/jrockit_160_24_D1.1.2-4/jre/lib/i386/jrockit:/opt/middleware/jrockit_160_24_D1.1.2-4/jre/lib/i386:/opt/middleware/jrockit_160_24_D1.1.2-4/jre/../lib/i386:/opt/middleware/Oracle_ECM1/ucm/idc/components/EmailMetadata/lib:/opt/middleware/Oracle_ECM1/ucm/idc/components/NativeOsUtils/lib/linux/7.2.1.0:/opt/middleware/Oracle_ECM1/ucm/idc/components/SiteStudio/lib:/opt/middleware/Oracle_ECM1/ucm/idc/components/SiteStudioPublisher/lib:/opt/middleware/patch_wls1035/profiles/default/native:/opt/middleware/patch_oepe1050/profiles/default/native:/opt/middleware/patch_ocp360/profiles/default/native:/opt/middleware/jrockit_160_24_D1.1.2-4/jre/lib/i386/jrockit:/opt/middleware/jrockit_160_24_D1.1.2-4/jre/lib/i386:/opt/middleware/jrockit_160_24_D1.1.2-4/jre/../lib/i386:/opt/middleware/patch_wls1035/profiles/default/native:/opt/middleware/patch_oepe1050/profiles/default/native:/opt/middleware/patch_ocp360/profiles/default/native:/opt/middleware/wlserver_10.3/server/native/linux/i686:/opt/middleware/wlserver_10.3/server/native/linux/i686/oci920_8:/opt/middleware/wlserver_10.3/server/native/linux/i686:/opt/middleware/wlserver_10.3/server/native/linux/i686/oci920_8:/opt/middleware/Oracle_ECM1/ucm/idc/components/ContentAccess-linux/linux/lib/contentaccess:/opt/middleware/Oracle_ECM1/ucm/idc/components/ContentAccess-linux/linux/lib/contentaccess/
refinery/6 11.01 08:27:27.919 Job_77_itdl267tempitlocal16200 GDFONTPATH=/usr/share/fonts/msttcorefonts/
refinery/6 11.01 08:27:27.919 Job_77_itdl267tempitlocal16200 PATH=/opt/middleware/Oracle_ECM1/ucm/idc/components/ContentAccess-linux/linux/lib/contentaccess/
refinery/6 11.01 08:27:27.919 Job_77_itdl267tempitlocal16200 min time = 120000
refinery/6 11.01 08:27:27.919 Job_77_itdl267tempitlocal16200 max time = 300000
refinery/6 11.01 08:27:27.919 Job_77_itdl267tempitlocal16200 time factor = 2
refinery/6 11.01 08:27:27.919 Job_77_itdl267tempitlocal16200 (adjusted) time allowed 120000
refinery/6 11.01 08:27:27.919 Job_77_itdl267tempitlocal16200 appending to launch cmd: '/opt/middleware/user_projects/domains/wcs_domain/ucm/ibr/vault/~temp/itdl267tempitlocal16200/77/881.docx'
refinery/6 11.01 08:27:27.919 Job_77_itdl267tempitlocal16200 appending to launch cmd: '/opt/middleware/user_projects/domains/wcs_domain/ucm/ibr/vault/~temp/itdl267tempitlocal16200/77/itdl267hki000884~1.pdf'
refinery/6 11.01 08:27:27.919 Job_77_itdl267tempitlocal16200 appending to launch cmd: '/opt/middleware/user_projects/domains/wcs_domain/ucm/ibr/vault/~temp/itdl267tempitlocal16200/77/px.cfg'
refinery/6 11.01 08:27:27.920 CmdLineConversion_77_exsimple /opt/middleware/Oracle_ECM1/ucm/idc/components/ContentAccess-linux/linux/lib/contentaccess//exsimple /opt/middleware/user_projects/domains/wcs_domain/ucm/ibr/vault/~temp/itdl267tempitlocal16200/77/881.docx /opt/middleware/user_projects/domains/wcs_domain/ucm/ibr/vault/~temp/itdl267tempitlocal16200/77/itdl267hki000884~1.pdf /opt/middleware/user_projects/domains/wcs_domain/ucm/ibr/vault/~temp/itdl267tempitlocal16200/77/px.cfg
refinery/6 11.01 08:27:28.090 TaskLauncher_CmdLineConversion_77_exsimple_stdout Export successful: 1 output file(s) created.
refinery/6 11.01 08:27:28.090 Job_77_itdl267tempitlocal16200 exsimple return value: 0; out file: /opt/middleware/user_projects/domains/wcs_domain/ucm/ibr/vault/~temp/itdl267tempitlocal16200/77/itdl267hki000884~1.pdf; isValid: true
refinery/6 11.01 08:27:28.093 Job_77_itdl267tempitlocal16200 Finished step: PDFExport
refsteplogic/6 11.01 08:27:28.093 Job_77_itdl267tempitlocal16200 Loading data for step: ExecuteSubconversion
refsteplogic/6 11.01 08:27:28.093 Job_77_itdl267tempitlocal16200 No timeout name was passed....using: DefaultTimeout
refinery/6 11.01 08:27:28.093 Job_77_itdl267tempitlocal16200 Starting step: ExecuteSubconversion
refsteplogic/6 11.01 08:27:28.093 Job_77_itdl267tempitlocal16200 Loading data for step: ExecuteSubconversion
refsteplogic/6 11.01 08:27:28.093 Job_77_itdl267tempitlocal16200 No timeout name was passed....using: DefaultTimeout
refinery/6 11.01 08:27:28.093 Job_77_itdl267tempitlocal16200 Script: ignoreStatus
refinery/6 11.01 08:27:28.093 Job_77_itdl267tempitlocal16200 Evaluated to: ignoreStatus
refinery/6 11.01 08:27:28.093 Job_77_itdl267tempitlocal16200 Script: <$subConversion$>
refinery/6 11.01 08:27:28.093 Job_77_itdl267tempitlocal16200 Evaluated to: CreateThumbnail
refinery/6 11.01 08:27:28.093 Job_77_itdl267tempitlocal16200 starting conversion: CREATETHUMBNAIL; is subconversion: true
refinery/6 11.01 08:27:28.093 Job_77_itdl267tempitlocal16200 Script: <$isTrue(CreateThumbnails)$>
refinery/6 11.01 08:27:28.093 Job_77_itdl267tempitlocal16200 Evaluated to: 0
refinery/6 11.01 08:27:28.094 Job_77_itdl267tempitlocal16200 finished conversion: CREATETHUMBNAIL; is subconversion: true
refinery/6 11.01 08:27:28.094 Job_77_itdl267tempitlocal16200 Finished step: ExecuteSubconversion
refinery/6 11.01 08:27:28.094 Job_77_itdl267tempitlocal16200 finished conversion: DIRECT PDFEXPORT; is subconversion: true
refinery/6 11.01 08:27:28.094 Job_77_itdl267tempitlocal16200 Finished step: ExecuteSubconversion
refinery/6 11.01 08:27:28.094 Job_77_itdl267tempitlocal16200 finished conversion: UNIVERSALCONVERSION; is subconversion: true
refinery/6 11.01 08:27:28.094 Job_77_itdl267tempitlocal16200 Finished step: ExecuteSubconversion
refinery/6 11.01 08:27:28.094 Job_77_itdl267tempitlocal16200 finished conversion: MSOFFICE; is subconversion: true
refinery/6 11.01 08:27:28.094 Job_77_itdl267tempitlocal16200 Finished step: ExecuteSubconversion
refsteplogic/6 11.01 08:27:28.094 Job_77_itdl267tempitlocal16200 Loading data for step: PDFExport
refinery/6 11.01 08:27:28.094 Job_77_itdl267tempitlocal16200 Steps completed for Job: 77
refinery/6 11.01 08:27:28.094 Job_77_itdl267tempitlocal16200 PDFExport: 1: /opt/middleware/user_projects/domains/wcs_domain/ucm/ibr/vault/~temp/itdl267tempitlocal16200/77/itdl267hki000884~1.pdf
refinery/6 11.01 08:27:28.095 Job_77_itdl267tempitlocal16200 dConversionState = Converted
refinery/6 11.01 08:27:28.095 Job_77_itdl267tempitlocal16200 dConvMessage = Success
refinery/6 11.01 08:27:28.095 Job_77_itdl267tempitlocal16200 dFormat = application/pdf
refinery/6 11.01 08:27:28.095 Job_77_itdl267tempitlocal16200 dWebExtension = pdf
refinery/6 11.01 08:27:28.095 Job_77_itdl267tempitlocal16200 RefineryConvertedFile = itdl267hki000884~1.pdf
refinery/6 11.01 08:27:28.095 Job_77_itdl267tempitlocal16200 RefineryPrimaryConvertedPath = /opt/middleware/user_projects/domains/wcs_domain/ucm/ibr/vault/~temp/itdl267tempitlocal16200/77/itdl267hki000884~1.pdf
refinery/6 11.01 08:27:28.095 Job_77_itdl267tempitlocal16200 AdditionalRenditions =
refinery/6 11.01 08:27:28.095 Job_77_itdl267tempitlocal16200 finished conversion: WORD; is subconversion: false
refperformance/6 11.01 08:27:28.095 Job_77_itdl267tempitlocal16200 job progress for: 77 -- finished conversion
(internal)/6 11.01 08:27:32.906 QueueLockId_77 Refinery tryied to return key 'AdditionalRenditions' but value was null
refperformance/6 11.01 08:27:32.906 QueueLockId_77 job progress for: 77 -- moving to postconverted queue
refinery/6 11.01 08:27:32.907 QueueLockId_77 entered m_postConvertedJobsTable edit with action: ADDJOB; on jobID: 77
Edited by: hessu on 1.11.2011 8:50
What exactly you mean with pdf drivers.
I have not configured "Distiller Engine" in any way, since configuration guide says:
http://download.oracle.com/docs/cd/E21764_01/doc.1111/e10800/c03_pdfi_all.htm
"PDFExportConverter Enables Inbound Refinery to use Oracle OutsideIn PDF Export to convert native formats directly to PDF on multiple platforms without the use of any 3rdParty >tools."br,
-hk
i remember configuring distiller engine ghostscript with earlier 10g version...
Edited by: hessu on 4.11.2011 8:44
Similar Messages
-
Welcome.
At the outset, I'm sorry for my English
Please help with configuration Photoshop CS6 appearance.
How to disable the background of the program so you can see the desktop. (same menus and tools)
i wantto be the same effect as CS5.Please try turning off
Window > Application Frame -
I would need help with saving some eamil messages to a disk to unclutter my email. How can I do this please?
Thanks.
ElisabethOpen the email and then from the File menu select Save As Rich Text Format. That'll save it to open in TextEdit. If you want a pdf then open the email and do command-p (Print) and then from the PDF drop down box lower left corner select Save as PDF.
-
ISM with NAT44 - Need help with configuration
Hello everyone,
I'm trying to set up NAT44 in the following scenario below and I'm having a hard time figuring out how to redirect the traffic. As you can see the big problem is that I have one single interface that connects to the internal network (10.0.0.0/8) and also to the tunnel destinations all in the same VRF. Can you guys give me a hand? The trafiic comes from network network 10.0.0.0/8 enters interface bundle-ether 2 (Now it needs to be translated), once it is translated, now it needs to reach the destination known via GRE tunnel.
Configurations
vrf NAT_IN
address-family ipv4 unicast
vrf BLUE
address-family ipv4 unicast
hw-module service cgn location 0/3/CPU0
interface Bundle-Ether2
description UPLINK TO METRO ETHERNET
interface Bundle-Ether2.2 l2transport
encapsulation dot1q 2
rewrite ingress tag pop 1 symmetric
interface GigabitEthernet200/0/0/43
description LINK TO METRO ETHERNET
bundle id 2 mode active
interface GigabitEthernet300/0/0/43
description LINK TO METRO ETHERNET
bundle id 2 mode active
interface BVI2
description METRO
vrf BLUE
ipv4 address 100.0.0.10/24
interface tunnel-ip 101
description GRE_TUNNEL
vrf BLUE
ipv4 address 1.1.1.1/32
tunnel mode gre ipv4
tunnel source interface bvi 2
tunnel destination 200.0.0.1
interface BVI 100
vrf BLUE
ipv4 address [GATEWAY_100] [MASK_100]
interface BVI 200
vrf BLUE
ipv4 address [GATEWAY_200] [MASK_200]
interface BVI 300
vrf BLUE
ipv4 address [GATEWAY_300] [MASK_300]
interface ServiceApp1
vrf NAT_IN
ipv4 address 10.0.2.1 255.255.255.252
service cgn CGN service-type nat44
interface ServiceApp2
vrf BLUE
ipv4 address 10.0.2.2 255.255.255.252
service cgn CGN service-type nat44
interface ServiceInfra1
ipv4 address 10.0.3.1 255.255.255.0
service-location 0/3/CPU0
router static
address-family ipv4 unicast
vrf NAT_IN
address-family ipv4 unicast
0.0.0.0/0 ServiceApp1
10.0.0.0/8 vrf BLUE bvI 2 <NEXT HOP>
vrf BLUE
address-family ipv4 unicast
172.16.0.0/24 ServiceApp2
router ospf METRO
vrf BLUE
router-id [ROUTER_ID]
redistribute bgp 65500 metric 100
area 0
interface bvi 2
router ospf BLUE
vrf BLUE
router-id [ROUTER ID]
redistribute bgp 65500 metric 100
area 10
interface BVI100
interface BVI200
interface BVI200
router bgp 65500
address-family ipv4 unicast
address-family vpnv4 unicast
vrf BLUE
rd 65500:2
address-family ipv4 unicast
redistribute static
redistribute ospf BLUE
neighbor 1.1.1.2
remote-as 64512
ebgp-multihop 5
address-family ipv4 unicast
route-policy PASS in
route-policy PASS out
service cgn CGN
service-location preferred-active 0/3/CPU0
service-type nat44 nat44
portlimit 20000
inside-vrf NAT_IN
map outside-vrf BLUE address-pool 172.16.0.0/24
Thanks in advance,
RenatoHi Somnath,
Let's see if you can help with this new scenario. I want to extend this NAT configuration to a new site (BO1), but instead of using this entire setup with ASR9K, etc, I just want to use ASR9000v module and have this AS9K + ISM as the host. The first problem I see in this scenario is that I have the same 10.0.0.0/8 network in both sites, network which will access the same resources as the devices in the 10.0.0.0/8 in the main site.
1) Do you think if I create a new inside VRF [NAT_IN1] would address this issue?
2) Can I use the same outside VRF?
Here is the configurations.
!! IOS XR Configuration 4.3.1
vrf NAT_IN
address-family ipv4 unicast
import route-target
65500:2
65500:3
export route-target
65500:3
vrf RED
address-family ipv4 unicast
import route-target
65500:1
export route-target
65500:1
vrf NAT_OUT
address-family ipv4 unicast
import route-target
65500:4
export route-target
65500:4
vrf SATELLITE
vrf BLUE
address-family ipv4 unicast
import route-target
65500:2
export route-target
65500:2
hw-module service cgn location 0/3/CPU0
ipv4 access-list ABF
5 permit ospf any any
10 permit ipv4 any 10.200.0.0 0.0.255.255 nexthop1 vrf NAT_IN ipv4 10.0.2.2
20 permit icmp any any
interface Bundle-Ether3
description Uplink (BE3 - VRF NAT_IN) - VLAN 20
vrf NAT_IN
ipv4 address 1.1.1.1 255.255.255.0
ipv4 access-group ABF ingress
interface Bundle-Ether22
description LOOPBACK CABLE NAT_OUT
vrf NAT_OUT
ipv4 address 10.0.1.1 255.255.255.0
interface Bundle-Ether23
description LOOPBACK CABLE BLUE
vrf BLUE
ipv4 address 10.0.1.2 255.255.255.0
interface 6
description Uplink (BE6 - Global) - VLAN 20,51,80-82
interface 6.2
ipv4 address 1.1.1.2 255.255.255.0
encapsulation dot1q 2
interface 6.51 l2transport
description EFP - BE6 - VLAN 51
encapsulation dot1q 51
rewrite ingress tag pop 1 symmetric
interface 6.80 l2transport
description EFP - BE6 - VLAN 80
encapsulation dot1q 80
rewrite ingress tag pop 1 symmetric
interface 6.81 l2transport
description EFP - BE6 - VLAN 81
encapsulation dot1q 81
rewrite ingress tag pop 1 symmetric
interface 6.82 l2transport
description EFP - BE6 - VLAN 82
encapsulation dot1q 82
rewrite ingress tag pop 1 symmetric
interface Bundle-Ether100
description Bundle to Satellite 100
vrf SATELLITE
ipv4 point-to-point
ipv4 unnumbered Loopback0
nv
satellite-fabric-link satellite 100
remote-ports GigabitEthernet 0/0/0-43
interface Bundle-Ether200
description Bundle to Satellite 200
vrf SATELLITE
ipv4 point-to-point
ipv4 unnumbered Loopback0
nv
satellite-fabric-link satellite 200
remote-ports GigabitEthernet 0/0/0-43
interface Bundle-Ether300
description Bundle to Satellite 300
vrf SATELLITE
ipv4 point-to-point
ipv4 unnumbered Loopback0
nv
satellite-fabric-link satellite 300
remote-ports GigabitEthernet 0/0/0-35
interface Loopback0
description MGMT SATELLITE
vrf SATELLITE
ipv4 address 10.0.0.254 255.255.255.0
interface tunnel-ip31101
description BLUE-TUNNEL01
vrf BLUE
ipv4 address 10.200.253.90 255.255.255.252
tunnel mode gre ipv4
tunnel source 6.2
tunnel destination 13.13.13.13
interface tunnel-ip31102
description BLUE-TUNNEL02
vrf BLUE
ipv4 address 10.200.253.94 255.255.255.252
tunnel mode gre ipv4
tunnel source 6.2
tunnel destination 14.14.14.14
interface tunnel-ip31103
description RED-TUNNEL03
vrf RED
ipv4 address 10.200.253.90 255.255.255.252
tunnel mode gre ipv4
tunnel source 6.2
tunnel destination 13.13.13.13
interface tunnel-ip31104
description RED-TUNNEL04
vrf RED
ipv4 address 10.200.253.94 255.255.255.252
tunnel mode gre ipv4
tunnel source 6.2
tunnel destination 14.14.14.14
interface TenGigE0/0/0/0
description LINK TO SATELLITE 100
bundle id 100 mode on
interface TenGigE0/0/0/1
description LINK TO SATELLITE 100
bundle id 100 mode on
interface TenGigE0/0/0/2
description LINK TO SATELLITE 200
bundle id 200 mode on
interface TenGigE0/0/0/3
description LINK TO SATELLITE 200
bundle id 200 mode on
interface TenGigE0/0/0/4
description LINK TO SATELLITE 300
vrf SATELLITE
ipv4 point-to-point
ipv4 unnumbered Loopback0
nv
satellite-fabric-link satellite 300
remote-ports GigabitEthernet 0/0/36-43
interface TenGigE0/0/0/5
description LINK TO SATELLITE 300
bundle id 300 mode on
interface TenGigE0/0/0/16
description UPLINK (BE6 - GLOBAL) - VLAN 20,51,80-82
bundle id 6 mode active
interface TenGigE0/1/0/16
description UPLINK (BE6 - GLOBAL) - VLAN 20,51,80-82
bundle id 6 mode active
interface TenGigE0/0/0/17
description UPLINK (BE3 - VRF NAT_IN) - VLAN 20
bundle id 3 mode active
interface TenGigE0/1/0/17
description UPLINK (BE3 - VRF NAT_IN) - VLAN 20
bundle id 3 mode active
interface TenGigE0/0/0/22
description LOOPBACK CABLE TE0/1/0/22
bundle id 22 mode on
interface TenGigE0/0/0/23
description LOOPBACK CABLE TE0/1/0/23
bundle id 22 mode on
interface TenGigE0/1/0/0
description LINK TO SATELLITE 100
bundle id 100 mode on
interface TenGigE0/1/0/1
description LINK TO SATELLITE 100
bundle id 100 mode on
interface TenGigE0/1/0/2
description LINK TO SATELLITE 200
bundle id 200 mode on
interface TenGigE0/1/0/3
description LINK TO SATELLITE 200
bundle id 200 mode on
interface TenGigE0/1/0/4
description LINK TO SATELLITE 300
bundle id 300 mode on
interface TenGigE0/1/0/5
description LINK TO SATELLITE 300
bundle id 300 mode on
interface TenGigE0/1/0/22
description LOOPBACK CABLE TE0/0/0/22
bundle id 23 mode on
interface TenGigE0/1/0/23
description LOOPBACK CABLE TE0/0/0/23
bundle id 23 mode on
interface BVI30
vrf RED
ipv4 address 10.200.25.193 255.255.255.192
interface BVI31
vrf BLUE
ipv4 address 10.200.1.1 255.255.255.248
interface BVI32
vrf BLUE
ipv4 address 10.200.25.129 255.255.255.224
interface BVI33
vrf BLUE
ipv4 address 10.200.25.1 255.255.255.128
interface BVI36
vrf BLUE
ipv4 address 10.200.237.145 255.255.255.240
interface BVI51
vrf RED
ipv4 address 192.168.7.12 255.255.255.0
interface BVI80
vrf RED
ipv4 address 10.200.26.169 255.255.255.224
interface BVI81
vrf BLUE
ipv4 address 10.200.25.164 255.255.255.240
interface BVI82
vrf BLUE
ipv4 address 10.200.25.180 255.255.255.240
interface ServiceApp1
description NAT_IN
vrf NAT_IN
ipv4 address 10.0.2.1 255.255.255.252
service cgn CGN service-type nat44
interface ServiceApp2
description NAT_OUT
vrf NAT_OUT
ipv4 address 10.0.2.5 255.255.255.252
service cgn CGN service-type nat44
interface ServiceInfra1
description ISM
ipv4 address 10.0.3.1 255.255.255.0
service-location 0/3/CPU0
prefix-set PS_ROUTES
10.200.0.8,
10.200.5.40/29,
10.200.1.0/29,
10.200.5.32/29,
10.200.0.144/28,
10.200.106.0/28,
10.200.106.16/28
end-set
prefix-set PS_BGP_BLUE_OUT
10.200.24.192/26,
10.200.5.40/29,
10.200.240.0/25,
10.200.1.0/29,
10.200.25.128/27,
10.200.25.0/25,
10.200.5.32/29,
10.200.26.0/25,
10.200.0.144/28,
10.200.27.128/27,
10.200.27.0/25,
10.200.106.0/28,
10.200.106.128/25,
10.200.106.16/28,
10.200.107.128/25
end-set
route-policy RP_DENY_ALL
drop
end-policy
route-policy RP_PASS_ALL
pass
end-policy
route-policy RP_BGP_BLUE_OUT
if destination in PS_BGP_BLUE_OUT then
pass
endif
end-policy
route-policy RP_PASS_ROUTES
if destination in PS_ROUTES then
pass
endif
end-policy
router static
address-family ipv4 unicast
0.0.0.0/0 1.1.1.20
vrf NAT_IN
address-family ipv4 unicast
0.0.0.0/0 ServiceApp1
vrf RED
vrf NAT_OUT
address-family ipv4 unicast
0.0.0.0/0 10.0.1.2
10.200.24.192/26 ServiceApp2
vrf BLUE
address-family ipv4 unicast
10.200.24.192/26 10.0.1.1
router ospf
log adjacency changes
vrf NAT_IN
router-id 1.1.1.1
disable-dn-bit-check
redistribute bgp 65500 metric 5 metric-type 2 route-policy RP_PASS_ROUTES
area 7
interface Bundle-Ether3
router ospf RED
log adjacency changes
vrf RED
router-id 10.200.26.169
disable-dn-bit-check
redistribute bgp 65500 metric 10 metric-type 2
area 11
interface BVI30
interface BVI80
router ospf BLUE
log adjacency changes
vrf BLUE
router-id 10.200.25.164
disable-dn-bit-check
redistribute static
redistribute bgp 65500 metric 10 metric-type 2
area 0
interface BVI81
interface BVI82
area 2
interface BVI31
interface BVI32
interface BVI33
interface BVI36
router bgp 65500
address-family ipv4 unicast
address-family vpnv4 unicast
vrf NAT_IN
rd 65500:3
bgp router-id 1.1.1.1
address-family ipv4 unicast
route-target download
vrf RED
rd 65500:1
bgp router-id 10.200.253.90
address-family ipv4 unicast
network 10.200.25.192/26
network 10.200.26.128/27
network 10.200.26.192/27
network 10.200.27.192/26
network 10.200.104.128/27
network 10.200.104.160/27
neighbor 10.200.253.89
remote-as 64512
ebgp-multihop 5
update-source tunnel-ip31103
address-family ipv4 unicast
route-policy RP_PASS_ALL in
route-policy RP_PASS_ALL out
soft-reconfiguration inbound
neighbor 10.200.253.93
remote-as 64512
ebgp-multihop 5
update-source tunnel-ip31104
address-family ipv4 unicast
route-policy RP_PASS_ALL in
route-policy RP_PASS_ALL out
soft-reconfiguration inbound
vrf BLUE
rd 65500:2
bgp router-id 10.200.253.90
address-family ipv4 unicast
network 10.200.0.144/28
network 10.200.1.0/29
network 10.200.5.32/29
network 10.200.5.40/29
network 10.200.24.192/26
network 10.200.25.0/25
network 10.200.25.128/27
network 10.200.26.0/25
network 10.200.27.0/25
network 10.200.27.128/27
network 10.200.106.0/28
network 10.200.106.16/28
network 10.200.106.128/25
network 10.200.107.128/25
network 10.200.240.0/25
neighbor 10.200.253.89
remote-as 64512
ebgp-multihop 5
update-source tunnel-ip31101
address-family ipv4 unicast
route-policy RP_PASS_ALL in
route-policy RP_BGP_BLUE_OUT out
soft-reconfiguration inbound
neighbor 10.200.253.93
remote-as 64512
ebgp-multihop 5
update-source tunnel-ip31102
address-family ipv4 unicast
route-policy RP_PASS_ALL in
route-policy RP_BGP_BLUE_OUT out
soft-reconfiguration inbound
l2vpn
load-balancing flow src-dst-ip
bridge group VLAN30
bridge-domain VLAN30
routed interface BVI30
bridge group VLAN31
bridge-domain VLAN31
routed interface BVI31
bridge group VLAN32
bridge-domain VLAN32
routed interface BVI32
bridge group VLAN33
bridge-domain VLAN33
routed interface BVI33
bridge group VLAN36
bridge-domain VLAN36
routed interface BVI36
bridge group VLAN51
bridge-domain VLAN51
routed interface BVI51
bridge group VLAN80
bridge-domain VLAN80
interface 6.80
routed interface BVI80
bridge group VLAN81
bridge-domain VLAN81
interface 6.81
routed interface BVI81
bridge group VLAN82
bridge-domain VLAN82
interface 6.82
routed interface BVI82
nv
satellite 100
type asr9000v
ipv4 address 10.0.0.1
satellite 200
type asr9000v
ipv4 address 10.0.0.2
satellite 300
type asr9000v
ipv4 address 10.0.0.3
service cgn CGN
service-location preferred-active 0/3/CPU0
service-type nat44 nat44
portlimit 20000
inside-vrf NAT_IN
map outside-vrf NAT_OUT address-pool 10.200.24.192/26
Thanks in advance,
Renato -
I'm new to Cisco and we just took over a client with an ASA 5505 I need to do 2 things first
I need to know how to open or forward ports to an internal IP address they want me to open ports 3389 and 1433 to an internal address 192.168.192.52
but only from 207.235.73.64 and 255.255.255.192
40.143.46.64 and 255.255.255.192
o and
66.192.91.128 and 255.255.255.192
40.143.28.64 and 255.255.255.192
And second Id link to getb the ASDM downlaoded and working as I;ve used that before in other offices and it helps me out as a non cisco expert. I try going to the device IP in a browser 192.168.192.1/admin and just get a prompt for username and password but it doesn;t take the one I have. Here is the config on the device right now. Any help you guys can point me to Id appreciate. 4 hours of Google research has gotten me no where
sho run
: Saved
ASA Version 7.2(3)
hostname vmine
domain-name mine
enable password CyQcVKTj6CW8.Vsj encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.192.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address x.x.x.x 255.255.255.248
interface Vlan3
mac-address 001f.6ce3.bd99
no forward interface Vlan1
nameif guest
security-level 10
ip address 205.10.2.1 255.255.255.0
interface Ethernet0/0
description Internet-Connection
switchport access vlan 2
interface Ethernet0/1
description Connection to Inside Network
speed 100
duplex full
interface Ethernet0/2
shutdown
interface Ethernet0/3
switchport access vlan 2
interface Ethernet0/4
switchport access vlan 3
interface Ethernet0/5
description Connection to Public Network
switchport access vlan 3
speed 100
duplex full
interface Ethernet0/6
shutdown
interface Ethernet0/7
shutdown
passwd CyQcVKTj6CW8.Vsj encrypted
ftp mode passive
dns server-group DefaultDNS
domain-name domain
access-list guest extended permit icmp any any
access-list guest extended permit ip any any
access-list inside extended permit icmp any any
access-list inside extended permit ip any any
access-list outside extended permit icmp any any echo-reply
access-list outside extended permit tcp any any eq 8440
access-list nonat extended permit ip 192.168.192.0 255.255.255.0 192.168.252.0 255.255.255.0
access-list outside-in extended permit tcp any any eq https
access-list outside-in extended permit tcp host x.x.x.x any eq 1433
access-list outside-in extended permit tcp host x.x.x.x any eq 1433
access-list outside-in extended permit tcp host x.x.x.x any eq 1433
access-list outside-in extended permit tcp host x.x.x.x any eq 1433
access-list outside-in extended permit tcp host x.x.x.x any eq 1433
access-list outside-in extended permit tcp host x.x.x.x any eq 1433
access-list outside-in extended permit tcp host x.x.x.x any eq 1433
access-list outside-in extended permit tcp host x.x.x.x any eq 1433
access-list outside-in extended permit tcp host x.x.x.x any eq 1433
access-list outside-in extended permit tcp host x.x.x.x any eq 1433
access-list outside-in extended permit tcp host x.x.x.x any eq 1433
pager lines 24
logging enable
logging buffer-size 16384
logging buffered informational
mtu inside 1500
mtu outside 1500
mtu guest 1500
ip local pool vpn-ip 192.168.252.1-192.168.252.
10
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm.bin
no asdm history enable
arp timeout 14400
global (outside) 1 x.x.x.x
global (outside) 2 x.x.x.x
nat (inside) 0 access-list nonat
nat (inside) 1 192.168.192.0 255.255.255.0
nat (guest) 2 205.10.2.0 255.255.255.0
static (inside,outside) tcp interface www 192.168.192.170 www netmask 255.255.255.255
static (inside,outside) tcp interface https 192.168.192.170 https netmask 255.255.255.255
static (inside,outside) x.x.x.x 192.168.192.52 netmask 255.255.255.255
access-group inside in interface inside
access-group outside-in in interface outside
access-group guest in interface guest
route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
http server enable
http 0.0.0.0 0.0.0.0 inside
http 192.168.192.0 255.255.255.0 inside
snmp-server host inside 192.168.192.10 poll community ciscosnmp
snmp-server location PIX
no snmp-server contact
snmp-server community ciscosnmp
snmp-server enable traps snmp authentication linkup linkdown coldstart
snmp-server enable traps syslog
crypto ipsec transform-set DES-MD5 esp-des esp-md5-hmac
crypto dynamic-map dynvpn 10 set transform-set DES-MD5
crypto map vpn 65535 ipsec-isakmp dynamic dynvpn
crypto map vpn interface outside
crypto isakmp identity address
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption des
hash md5
group 2
lifetime 28800
crypto isakmp nat-traversal 20
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 inside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 30
console timeout 0
dhcpd dns 209.253.113.10 209.253.113.18
dhcpd address 205.10.2.10-205.10.2.99 guest
dhcpd dns 209.253.113.10 209.253.113.18 interface guest
dhcpd enable guest
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect ipsec-pass-thru
service-policy global_policy global
group-policy RA-VPN internal
group-policy RA-VPN attributes
split-tunnel-policy tunnelspecified
split-tunnel-network-list value nonat
username VMRemote password .RSNgq92vZTSELWV encrypted
username VMRemote attributes
vpn-group-policy RA-VPN
username VMVPN password jSqp8CjjxHhRa6jk encrypted
username kernels password jDS98nJtthzlEvw5 encrypted
tunnel-group VMVPN type ipsec-ra
tunnel-group VMVPN general-attributes
address-pool vpn-ip
tunnel-group VMVPN ipsec-attributes
pre-shared-key *
prompt hostname context
Cryptochecksum:52c3d65fc1111c561b1598cc341dc6d5
: endHi,
As per your 1st query , I think he Static NAT should work fine.
To restrict the access from the outside only for certain IP , you can use Source Based ACL:-
access-list outside-in extended permit tcp 207.235.73.64 255.255.255.192 host x.x.x.x eq 3389
access-list outside-in extended permit tcp 40.143.46.64 255.255.255.192 host x.x.x.x eq 3389
access-list outside-in extended permit tcp 66.192.91.128 255.255.255.192 host x.x.x.x eq 3389
access-list outside-in extended permit tcp 40.143.28.64 255.255.255.192 host x.x.x.x eq 3389
access-list outside-in extended permit tcp 207.235.73.64 255.255.255.192 host x.x.x.x eq 1433
access-list outside-in extended permit tcp 40.143.46.64 255.255.255.192 host x.x.x.x eq 1433
access-list outside-in extended permit tcp 66.192.91.128 255.255.255.192 host x.x.x.x eq 1433
access-list outside-in extended permit tcp 40.143.28.64 255.255.255.192 host x.x.x.x eq 1433
If you would like to use the LOCAL username and Passowrd on the ASA:-
aaa authentication http console LOCAL
Thanks and Regards,
Vibhor -
Weird problems of figures with word to pdf conversion
Platform: Windows Vista
Word 2007
Acrobat 9
Q: I have some wmf format vector figures inserted into word file. When I convert the word file into pdf format using the built-in pdfmaker button in the word menu, the vector graphics all become bitmap type. If I use print to pdf commond, the graphics are still vector format. Because I want to retain the Heading markers and other bookmarkers in the converted pdf file, I prefer using the pdfmaker for the conversion.
Does anyone know how to fix it? it used to work in my old computer with acrobat 8 and word 2003. Not sure whether it is a compatability issue.You may want to be open to issues of WORD 2007, particularly if using a docx format. It may not be the issue you are having, but I have found problems with WORD itself for graphics. In some cases, it will take a nice graphic and split it into parts when creating a PDF. I am not sure what all the issues are, but WORD 2007 seems to be part of the problem, not just Acrobat. In fact, I have seen WORD take a vector graphic and change the fonts to a graphic, rather then leave them as a font in such a graphic - that was with a docx file. I am not saying WORD is the problem, but be open to alternate explanations of what is going on.
-
Need help with InDesign interactive PDF
Ive created an interactive pdf through InDesign Digital Publishing. When I preview it in the folio builder everything is working the way I set it up. But when I publish and go to adobe's Digital Publishing to view it, only a few pages will show. I tried sharing it with another and they can only view two of the 10 pages. And the 2 pages they see do not work well. I was in CS6 and am upgrading to Cloud hoping that might help? Any ideas of what im doing wrong?
This is my first file I have built in InDesign's Digital Publishing Layout. I built it as an iPad format horizontal and vertical layouts in one file. I added it as an article to one folio (first as pdf and also tried automatic). I created it with buttons, some basic animation (images that fade from one to another). Pretty basic stuff. When I go to view it in the folio builder or folio layers it is fine. When I click on folio producer it sends me to: https://digitalpublishing.acrobat.com/app.html#x=folioproducer to view the "content" which isn't all there. And that is what is seen on the iPad. Does that make sense? I new to this and obviously doing something wrong. Thanks for any advice to get this to work.
-
Need help with configuring a Printer Driver in Oracle apps
Hi,
We have set of interfaces/concurrent jobs which are programed to send the output file to file location1. Now we need to direct the output for all these jobs to file location2. The idea is to not modify the existing code, but have configuration in place which will re-direct the output files to the new “file location2”, once the concurrent job run is complete.
We have come across “Using Dummy Printer driver” option wherein we created a dummy printer driver with arguments as below and attached this printer to all these concurrent jobs.
mv <file location1>/$PROFILES$.TITLE <file location2>
This option is working fine if both the file locations are hard coded. But both these locations are configured in 2 separate profile options and the filepath would change from once Oracle instance to another.
We are looking for solutions where we can pass the profile option value to this printer driver instead of hardcoding it in the argument.
Also, please suggest any other solution to move the output files to a different location.
Please note that our client is on Oracle On-Demand environment (apps – 11.5.10) and hence a shell script cannot be used for this.
Thanks,
Kiranmayi.Hello Mark,
I can't support the netopia router/modem, but I would think there should be an admin guide for the configuration. If it is a modem/router and you said there is rules for allowing or blocking services, which sounds like access list you should be able to create a rule for the client you want to block on the modem/router to prevent it from talking to the internet.
If you want to insure no outside security threats can make it to the computer staticly assign an IP address but don't give it a default gateway address. The client will not be able to talk to any other network but its own. It sounds like you only have one vlan or a flat network so this should work, but if you need to be able to have this computer in the future talk to other networks internally then it isn't a viable solution. Blocking at the modem/router would be the only solution.
The SG300-08 Switch you could setup an ACL to block that client from talking to the modem/router, but the potential for causing valid traffic from being blocked in your own network grows.
To create this rule you would first
go to Access Control
Create a MAC Base ACL (give it a meaning full name)
Create 2 a MAC BASE ACE
Rule 1
Priority 10
Action Deny
Destination Any
Source User Defined
MAC address of client wanting to be blocked
Apply
Rule 2
Priority 20
Action Permit
Destination Any
Source Any
Apply
Bind the ACL to a port
Make sure to only bind the ACL to the port that connects to the router/modem.
Cisco Small Business Support Center
Randy Manthey
CCNA, CCNA - Security -
Need help with configuring setup cost as variable based on quantity
Hello,
I am brand new to PP and my client has inquiry as to how they can make the setup costs variable based on the production quantity. They already have the machine and labor working correctly, so I compared the formulas for machine and labor time with that of the formula for setup time and they are not the same (in fact, setup time does not have any formula). Do I simply need to create a formula for this or are there multiple other steps? If anyone can give instruction on how to set this up it would be of great help.
Thanks,
MHCheck in the Work Center, tab Costing where Setup Time should have a formula using operation quantity / base quantity as ratio.
Setup time should be included as parameter in the standard value key.
The formula in the Capacity Tab would have only effect on the capacity evaluation, but no costs impact.
Edited by: Dario on Feb 2, 2011 7:04 PM -
Need help with configure script for audacious plugin
Hello. I have written a small plugin for audacious, that uses an Amarok script to retrieve song lyrics and displays them in a window. I'd like to make an AUR package of it, but I don't even know how to write a configure script. I used to compile it with audacious-plugins, but I suppose a package with all audacious plugins plus my own would be sort of a duplicate of the vanilla audacious-plugins.
Can anyone help me?btn1.addEventListener(MouseEvent.CLICK,f1):
function f1(e:MouseEvent){
nextFrame();
btn2.addEventListener(MouseEvent.CLICK,f2):
function f2(e:MouseEvent){
prevFrame(); -
Need help with configuring web root and root url URL
Hello Folks,
I have been trying for a while to the flex 4 tutorial which asks you to connect to a mysql database. I have been able to configure the DB but cannot figure out what my web root and root url should be. Is there a web service that needs to be deployed or started. Would it be the IP address of the database that I created ( I tried that ) . I get the idea that an apache service must be started somehow on my flex environment and then I must find the root of the apache server. I dont see an apache directory anywhere. I am finding this difficult to know where to begin.Hi,
First you need to be running a web server on your computer something like wamp/mamp is usually the better choice as most people have had the best success with this server setup(and it has all the current services like php and myssql)
When you use the wizard the path to your webroot is usually whre you located the wamp/mamp install, for windows it maybe something like c:\wamp\www not 100% sure about macs but I think the 'www' folder on a mac is 'htdocs'.
your url is either http://localhost or http://127.0.0.1.
David. -
Need help with configuring QoS
Hello,
We are in the process of implementing MPLS for our WAN links so that we can run VoIP between 9 locations in the USA and I have lots of questions regarding how to configure QoS.
We have a dedicated E1 connection to our headquarters in Germany. This location houses all of our SAP servers.
In each location in the US, we will be using Avaya IP telephones and media gateways for voice communications. We also have some Polycom units in the field for video confererncing.
How would I begin to configure QoS for these network connections.
I was planning on using IP precedence or DSCP for marking the traffic and prioritizing as follows.
Highest Priority: Voice and video
2nd Highest: SAP and Oracle traffic
Default priority: Lotus notes, www access
Here are some questions that I have:
1- For voice/video, which DSCP values or IP precedence values do I use?
2- How do I assign voice/video to the LLQ queue?
3- For SAP, what is the best way to mark the SAP traffic? From my understanding, SAP uses a variety of ports.
4- For SAP and Oracle, should I use the CBWFQ queus? Is that preferable over other queues for this traffic?
5- Should I make another classification of traffic for things like signaling for Voice and TFTP/FTP?
6- If so for #5, what IP precedence/DSCP value(s) should I use and which queuing mechanism should I use?
Thanks for the help in advance. At this point, you can probably tell that I am a newbie to QoS.
PeteI can answer a few since i have a ton of avaya ip phones deployed.
1)personally i leave both bearer and signaling in same queue at 46 (Diffserv) and 5 (COS) Video would be 40/4.
2)sample config:
class-map match-all voip-fr
match ip dscp 46 (all traffic that have DSCP 46)
class-map match-all vovid-fr
match ip dscp 40(all traffic that have DSCP 40)
policy-map llq
class voip-fr
priority 100 (Reserve 100Kbps priority bw for DSCP 46)
class vovid-fr
bandwidth 300 (Reserve 300Kbps non-priority bw for DSCP 40)
class class-default
fair-queue
Serial Interface 0/0
service-policy output llq (Apply policy map to voice and signaling
traffic)
5) nope. leave tftp and data in the default queue
Also, since you are deploying Avaya IPT make sure you look at this document. great document i used.
http://support.avaya.com/elmodocs2/comm_mgr/r3_1/pdfs/245600_4_2.pdf -
Need help with configuring a particular setting on SF300-08
I work for a small business and we have a couple computers that we want to share a ethernet enabled copier/printer with, but for security reasons want to block those computers from internet access. How would one go about allowing that?
Thanks in advance,
Mark DavisHello Mark,
I can't support the netopia router/modem, but I would think there should be an admin guide for the configuration. If it is a modem/router and you said there is rules for allowing or blocking services, which sounds like access list you should be able to create a rule for the client you want to block on the modem/router to prevent it from talking to the internet.
If you want to insure no outside security threats can make it to the computer staticly assign an IP address but don't give it a default gateway address. The client will not be able to talk to any other network but its own. It sounds like you only have one vlan or a flat network so this should work, but if you need to be able to have this computer in the future talk to other networks internally then it isn't a viable solution. Blocking at the modem/router would be the only solution.
The SG300-08 Switch you could setup an ACL to block that client from talking to the modem/router, but the potential for causing valid traffic from being blocked in your own network grows.
To create this rule you would first
go to Access Control
Create a MAC Base ACL (give it a meaning full name)
Create 2 a MAC BASE ACE
Rule 1
Priority 10
Action Deny
Destination Any
Source User Defined
MAC address of client wanting to be blocked
Apply
Rule 2
Priority 20
Action Permit
Destination Any
Source Any
Apply
Bind the ACL to a port
Make sure to only bind the ACL to the port that connects to the router/modem.
Cisco Small Business Support Center
Randy Manthey
CCNA, CCNA - Security -
Noob Needs Help with VS2005 to VS23013 Conversion
I have a website that was built with VS2005 and would like to convert it to VS2013. A friend of mine built this site but I have no experience with any sort of development. The site also uses a sql database. My goal is to just edit the pictures and text using
VS2013 and to not change any layout or dimensions.
Any help is appreciated.
Bill DunnHello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because your issue is about web site, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Need help with configuring for WindowsXP
I'm running through the J2EE tutorial right now and I encountered a problem in Chapter 3. The problem came from setting up the database for Duke's Book Store. I am supposed to run the command asant create-db_common. I get the message:
BUILD FAILED
file:C:/j2eetutorial14/examples/common/targets.xml:21: C:\pointbase\lib not found.
The directory that it really wants is C:\Sun\AppServer\pointbase\lib
Is there an environment variable that I need to set in Windows?
Is there somewhere else that I need to set the asant file to search out the Sun/AppServer directory?
ThanksDid you set the j2ee.home property in common\build.properties correctly? In the futrure please search the forum before posting a question, I believe this question has been posted a few times. If the previous posts don't help then by all means feel free to post again.
Maybe you are looking for
-
FCE with AVCHD - unhappy marriage?
Hi! Problems with stuttering clips +My system: imac 2,2/2Gb Leopard 10.5/+ +Camera: Panasonic hdc 300 AVCHD 1920x1040+ +Audio system: Protools digi rack 44.100+ I am making a sequence and about ten minute into the sequence on a clip about 35 second l
-
Hi, Does any one knows where can i download Crystal Report XI R2? In [http://www.businessobjects.com/product/freetrials.asp] i can only find Crystal Reports XI not Crystal Reports XI R2. After i downloaded the version is 11.0.0.1282. Is this the cor
-
I can make a WiFi connection but pages will not load. WiFi works for a laptop using windows
I can make a WiFi connection but pages will not load. WiFi works ok on a laptop using Windows. I have reset the WiFi settings but this makes no difference.
-
Error in Assets creation in AS01
HI Expert, I'm facing error while trying to create Assets account under AS01 - strange part is i have created building account in same heading but while trying for mahinery and furniture getting 2 differene errors 1)Number range 1 is not in the numbe
-
Spinlock acquisition timed out
I have a Macbook white from late 2009. I have been having panic restarts lately (nearly daily if not twice daily(. When I look at the log I see this: Please Help! Interval Since Last Panic Report: 6637 sec Panics Since Last Report: 1 Ano