Help with constant BSOD

I keep getting BSOD.  At first I had windows vista installed, I tried updating everything, bios, memory drivers, graphics drivers, again still BSOD.  I downgrading to windows XP(because of this and other reasons).  I still get BSOD.
The messages associated with it are:
1)no message given
2)memory_management
3)irql_not_less_or_equal
I have the Lenovo T61p.
Any assistance would be greatly appreciated.

Hello David,
The Sequence setting needs to match the video and audio of the incoming files. When this occurs correctly rendering is minimized.
Sequence settings are selected by choosing the correct _Easy Setup_ before the material is edited to the Timeline.
Note: The Material has to match the Sequence settings not the other way round. FCE works with fixed formats.
If you provide details of the footage you are working with and how they arrived into FCE, we may be able to help.
Al

Similar Messages

  • Help with constants

    Suppose I define a class to contain a set of constants whose values ar stored in a database. Is there a way for the class to create constants based upon values retrieved from a database?
    In other words suppose I have a database table that stores information about shapes like this:
    SHAPES_TABLE {
    SHAPE_ID INT
    SHAPE_DESC VARCHAR
    Now the table is populated with these records
    1 Square
    2 Circle
    3 Triangle
    I would need to define three constants in my class like this
    public static final int SQUARE = 1;
    public static final int CIRCLE = 2;
    public static final int TRIANGLE = 3;
    Is there a way to do this dynamically when the class is loaded so that my constants class can reflect new values added to the database table without my having to go back and add new code?

    Is there a way to do this dynamically when the class
    is loaded so that my constants class can reflect new
    values added to the database table without my having
    to go back and add new code?It's technically possible. You could use a bytecode manipulation library like BCEL or CGLIB to create new constants in the class. However, since this is done at runtime, no other class would be able to refer to those constants.
    What are you really trying to do? There's probably a better approach.

  • Can someone please help with constant crashes ?

    I've had a tremendous issue with crashes for the last 2 to 3 weeks. I tried'' all of the suggested steps'' with no change. I send the report every single time and no response. Is there anywhere else I can send some of the report id's to and have someone look at them to see if they can narrow down my issue. Usually it happens if I leave the browser open and step away for 5 minutes, when I come back it crashed. Usually Facebook is open, Words With Friends, Pogo...But it doesn't have to be these 3 that I have noticed. This morning it wouldn't even open at all, went straight to crash. It will also crash randomly when I'm using it as well. I have well over 50 crash reports dating from 1-5-2012 which is when it started to become frequent. Anyone that can, please advise ?????????

    The Crash IDs as text are preferable to a screenshot.
    It appears you are on the Beta channel but are still on version 10. The ordinary release channel itself is now on 10.0.2. Version 10 was crashing and had security issues that was why releases10.0.1 and 10.0.2 were released. I suggest you update to the latest release version from
    * http://www.mozilla.org/en-US/firefox/all.html
    CrashID reports
    *[https://crash-stats.mozilla.com/report/index/352fd0d9-188b-41b7-8d17-c1f892120128 352fd0d9-188b-41b7-8d17-c1f892120128]
    *[https://crash-stats.mozilla.com/report/index/62393901-e27a-4489-9be7-969f62120128 62393901-e27a-4489-9be7-969f62120128]
    *[https://crash-stats.mozilla.com/report/index/f72e9b8d-abcf-4983-b8de-f4c4f2120127 f72e9b8d-abcf-4983-b8de-f4c4f2120127]

  • Help with constant error message ? Only had laptop one week

    HP Pavilion g6 g6-1278sa
    Windows 7 64-bit
    "hpqwutils.exe - no disk in drive, Please insert disk into drive\device\harddisk\dr1"
    Have installed a portable internet stick and game center called "Steam", have since deleted steam and problem still appearing, will also try unistall portable device but just wondering has anyone else come across this as quick check on internet had told me could be problem with printer  but i dont have any printer yet

    http://kb.mozillazine.org/Firefox_crashes

  • Help with constant crashing....?

    I know this a common topic. I've already read up on a few the error messages that have been giving people problems (disk to slow, etc). The problem I'm having is just very general crashing 3 or 4 times an hour. It can happen for any reason, creating a new track, clicking on a plugin insert. Also this isn't the crash where the software shuts down and gives you a message, this is the mouse pointer spinning endlessly until you force quit the application. My system specs should be able to handle the processing power though I do use a lot of fx, but I generally freeze all my tracks and I only work in midi. I've got a duo core 2.66 intel, 3g of ram, 2 hard drives, etc. Can't work like this. Any suggestions. Also, people have mentioned complaining to Mac? Where the heck do I do that? Seems like that's just a one way correspondence via the apple site.

    I know this a common topic. I've already read up on a few the error messages that have been giving people problems (disk to slow, etc). The problem I'm having is just very general crashing 3 or 4 times an hour. It can happen for any reason, creating a new track, clicking on a plugin insert. Also this isn't the crash where the software shuts down and gives you a message, this is the mouse pointer spinning endlessly until you force quit the application. My system specs should be able to handle the processing power though I do use a lot of fx, but I generally freeze all my tracks and I only work in midi. I've got a duo core 2.66 intel, 3g of ram, 2 hard drives, etc. Can't work like this. Any suggestions. Also, people have mentioned complaining to Mac? Where the heck do I do that? Seems like that's just a one way correspondence via the apple site.

  • I need help with these two crash IDs nsStyleContext::FindChildWithRules(nsIAtom const*, nsRuleNode*) and DFusionWebPlugin@0x86b5

    I need help with these two crashes...
    PL_DHashTableOperate | GCGraphBuilder::NoteRoot(unsigned int, void*, nsCycleCollectionParticipant*)
    DFusionWebPlugin@0x86b5
    The first one happened a couple of days ago, a few times and not on any specific website.
    The second one only happens on the site below.

    The second one indicates a problem with the DFusionWebPlugin that shows in your More system details list.
    # D'Fusion Web Plug-In for Safari 64 bits (3.00.13774.0)
    # D'Fusion Web Plug-In (3.00.13774.0)
    What you posted are crash signatures.<br />
    It might help if you post the actual crash IDs (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx).<br />
    You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
    See http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter)

  • Constant BSODs MSi hd 6970

    First of all sending shouts to all on this forum.
    Been searching through various forums and seeking the solution.
    A month ago I´ve upgraded my old 4890 to MSi HD 6970 and since then my problems have started.
    I´ve  found that several other MSi HD 6970 and 6*** users have this problem, albeit no solution has worked for me yet.
    Gonna keep it short.
    What´s the problem:
    - constant BSODs / vertical stripes and crashes while playing 3d games (Bad Company 2, AC: Brotherhood) - sometimes after 10 mins of gameplay, sometimes after an hour
    - no BSODs in Win 7 itself
    - no BSODs during movies / videos
    - no BSODs while dual monitor setup and both in use as extended (dvi Asus 24´´ and hdmi 42´´ LCD TV Samsung)
    What I´ve tried:
    - various drivers (original drivers supplied with the card, 11.4 to 11.8 CCC) - no change, still crashing
    - sweeped the old drivers in safe mode - no change
    - uninstalled the Afterburner app; from what I´ve learned it´s in conflict w/ punkbuster which is sort of mandatory for Bad Company 2
    - not using ANY kind of GPU utility (except CCC)
    - temps max 90 celsius in heavy load
    - fan running on 35% in heavy load
    My specs:
    CPU: INTEL Core 2 Duo E8500 - 3,16GHz
    RAM: 6GB  DDR3 1333MHz PC10666 CL6-6-6-18 OCZ Reaper HPC Edition
    Motherboard:INTEL DP45SG Skyberg
    Sound: firewire Edirol FA-66; on-board audio disabled
    VGA:MSI Radeon 6970 2PM2D2GD5
    HDD: WESTERN DIGITAL Caviar Black 500GB, SATA II, WESTERN DIGITAL Caviar Green 1000GB, SATA II
    PSU:TAGAN TG600-U88 600W ATX 2.2
    case: Antec P182
    OS:Windows 7 home premium x64
    Is it PSU, MB or any other component in conflict with the GPU?
    So lads, is it time for RMA?
    All your help and suggestions will be much appreciated

    Registered only to say: had same issues and solved it myself. I sent back the card to the vendor but they refused to do anything because according to their test softwares, the card was fine, the issue did not come up. Yet when I started playing 3D games, my card and PC froze after a few minutes.
    I spent hours searching for the solution and tested all that was suggested without resolution. In the end I took it apart, cleaned the original thermal paste from and around the GPU (it was clearly a mess, spilled around the  GPU and not evenly applied, plus it felt somehow very dry), then I applied a better quality paste that I previously purchased for my new CPU.  I put the card back into my PC and issue gone. I used to get above 95C  (especially the second GPU) just before the PC crashed, now the maximum is around 69-70 Celsius and no crash for a month (playing Guild wars2, assassins creed etc)
    It is very easy to do all this, even if you are a noob like myself. I 'm not a technical person, so I looked it up all on youtube: how to take the heatsink apart, how to clean the orignal paste and how to apply new paste.
    There is another issue I was also facing, with the famous atikmdag crash during games (freeze for a few seconds, then it comes back with the mesage that it has been recovered successfully) - the only workaround I found was to lower the GPU clock from 940 to 900MHz. Error disappeared completely and games are still runnig great on max graphics. It is fine for now, but I'm sure I wont buy another ATI graphic card

  • GTX 560 ti constant BSOD`s .. Troubling me ...

    Hi guys ...
    First things first, here are my system specs :
    core i5 760 @2.8GHz
    Asus P7P55D-E
    Corsair 2X2GB RAM
    MSI NGTX560ti Twin Frozr II OC Edition
    CM Hyper 212+
    Corsair GS600
    Windows 7 64bit
    I was using my XFX HD4350 for over a year now .. was running perfect .. When I upgraded my GPU about a week ago to MSI NGTX560ti Twin Frozr II OC Edition .. I am getting constant BSoD`s while playing games ... IT`s getting on my nerves ...
    I tried clearing CMOS , checked all power cables, Updated to latest Drivers from nVidia (ie: 285.62), Even did a fresh install of windows .. but to no avail ...
    The error on the blue screen I get is BAD POOL CALLER .. I don`t know what it means ... I`ve searched countless forums and did all the above which were recommended ...
    I request forum members and senior members to help me out of this problem ...
    Thank you,
    vizkid2005

    you can try this:
    1) first, update the BIOS of your motherboard, if you have been do it this, proced with the next tip
    2) upgrade bios of the VGA
    3) watch the TEMPS, and if your PSU is enough for the card
    4) change slot of the motherboard and test
    when i buyed this card, after install the card, i updated my BIOS of the motherboard, and later the BIOS of the card.

  • Help with Script created to check log files.

    Hi,
    I have a program we use in our organization on multiple workstations that connect to a MS SQL 2005 database on a Virtual Microsoft 2008 r2 Server. The program is quite old and programmed around the days when serial connections were the most efficient means
    of connection to a device. If for any reason the network, virtual server or the SAN which the virtual server runs off have roughly 25% utilization or higher on its resources the program on the workstations timeout from the SQL database and drop the program
    from the database completely rendering it useless. The program does not have the smarts to resync itself to the SQL database and it just sits there with "connection failed" until human interaction. A simple restart of the program reconnects itself
    to the SQL database without any issues. This is fine when staff are onsite but the program runs on systems out of hours when the site is unmanned.
    The utilization of the server environment is more than sufficient if not it has double the recommended resources needed for the program. I am in regular contact with the support for the program and it is a known issue for them which i believe they do not
    have any desire to fix in the near future. 
    I wish to create a simple script that checks the log files on each workstation or server the program runs on and emails me if a specific word comes up in that log file. The word will only show when a connection failure has occurred.
    After the email is sent i wish for the script to close the program and reopen it to resync the connection.
    I will schedule the script to run ever 15 minutes.
    I have posted this up in a previous post about a month ago but i went on holidays over xmas and the post died from my lack or response.
    Below is what i have so far as my script. I have only completed the monitoring of the log file and the email portion of it. I had some help from a guy on this forum to get the script to where it is now. I know basic to intermediate scripting so sorry for my
    crudity if any.
    The program is called "wasteman2G" and the log file is located in \\servername\WasteMan2G\Config\DCS\DCS_IN\alert.txt
    I would like to get the email side of this script working first and then move on to getting the restart of the program running after.
    At the moment i am not receiving an error from the script. It runs and doesn't complete what it should.
    Could someone please help?
    Const strMailto = "[email protected]"
    Const strMailFrom = "[email protected]"
    Const strSMTPServer = "mrc1tpv002.XXXX.local"
    Const FileToRead = "\\Mrctpv005\WasteMan2G\Config\DCS\DCS_IN\alert.txt"
    arrTextToScanFor = Array("SVR2006","SVR2008")
    Set WshShell = WScript.CreateObject("WScript.Shell")
    Set objFSO = WScript.CreateObject("Scripting.FileSystemObject")
    Set oFile = objFSO.GetFile(FileToRead)
    dLastCreateDate = CDate(WshShell.RegRead("HKLM\Software\RDScripts\CheckTXTFile\CreateDate"))
    If oFile.DateCreated = dLastCreateDate Then
    intStartAtLine = CInt(WshShell.RegRead("HKLM\Software\RDScripts\CheckTXTFile\LastLineChecked"))
    Else
    intStartAtLine = 0
    End If
    i = 0
    Set objTextFile = oFile.OpenAsTextStream()
    Do While Not objTextFile.AtEndOfStream
    If i < intStartAtLine Then
    objTextFile.SkipLine
    Else
    strNextLine = objTextFile.Readline()
    For each strItem in arrTextToScanFor
    If InStr(LCase(strNextLine),LCase(strItem)) Then
    strResults = strNextLine & vbcrlf & strResults
    End If
    Next
    End If
    i = i + 1
    Loop
    objTextFile.close
    WshShell.RegWrite "HKLM\Software\RDScripts\CheckTXTFile\FileChecked", FileToRead, "REG_SZ"
    WshShell.RegWrite "HKLM\Software\RDScripts\CheckTXTFile\CreateDate", oFile.DateCreated, "REG_SZ"
    WshShell.RegWrite "HKLM\Software\RDScripts\CheckTXTFile\LastLineChecked", i, "REG_DWORD"
    WshShell.RegWrite "HKLM\Software\RDScripts\CheckTXTFile\LastScanned", Now, "REG_SZ"
    If strResults <> "" Then
    SendCDOMail strMailFrom,strMailto,"VPN Logfile scan alert",strResults,"","",strSMTPServer
    End If
    Function SendCDOMail( strFrom, strSendTo, strSubject, strMessage , strUser, strPassword, strSMTP )
    With CreateObject("CDO.Message")
    .Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
    .Configuration.Fields.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = strSMTP
    .Configuration.Fields.item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1 'basic
    .Configuration.Fields.item("http://schemas.microsoft.com/cdo/configuration/sendusername") = strUser
    .Configuration.Fields.item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = strPassword
    .Configuration.Fields.Update
    .From = strFrom
    .To = strSendTo
    .Subject = strSubject
    .TextBody = strMessage
    On Error Resume Next
    .Send
    If Err.Number <> 0 Then
    WScript.Echo "SendMail Failed:" & Err.Description
    End If
    End With
    End Function

    Thankyou for that link, it did help quite a bit. What i wanted was to move it to csript so i could run the wscript.echo in commandline. It all took to long and found a way to complete it via Batch. I do have a problem with my script though and you might
    be able to help.
    What i am doing is searching the log file. Finding the specific words then outputting them to an email. I havent used bmail before so thats probably my problem but then im using bmail to send me the results.
    Then im clearing the log file so the next day it is empty so that when i search it every 15 minutes its clean and only when an error occurs it will email me.
    Could you help me send the output via email using bmail or blat?
    @echo off
    echo Wasteman Logfile checker
    echo Created by: Reece Vellios
    echo Date: 08/01/2014
    findstr "SRV2006 & SRV2008" \\Mrctpv005\WasteMan2G\Config\DCS\DCS_IN\Alert.Txt > c:\log4mail.txt
    if %errorlevel%==0 C:\Documents and Settings\rvellios\Desktop\DCS Checker\bmail.exe -s mrc1tpv002.xxx.local -t [email protected] -f [email protected] -h -a "Process Dump" -m c:\log4mail.txt -c
    for %%G in (\\Mrctpv005\WasteMan2G\Config\DCS\DCS_IN\Alert.Txt) do (copy /Y nul "%%G")
    This the working script without bmail
    @echo off
    echo Wasteman Logfile checker
    echo Created by: Reece Vellios
    echo Date: 08/01/2014
    findstr "SRV2006 & SRV2008" \\Mrctpv005\WasteMan2G\Config\DCS\DCS_IN\Alert.Txt > C:\log4mail.txt
    if %errorlevel%==0 (echo Connection error)
    for %%G in (\\Mrctpv005\WasteMan2G\Config\DCS\DCS_IN\Alert.Txt) do (copy /Y nul "%%G")
    I need to make this happen:
    If error occurs at "%errorlevel%=0" then it will output the c:\log4mail.txt via smtp email using bmail.

  • Can anyone help with iPlayer and Sky Mobile?

    Ok, I'm so close to giving up with this useless phone. There are 3 apps on my N97 which give me a constant headache.
    BBC iPlayer
    Sky Mobile*
    YouTube
    *I should point out that I only use Sky Mobile to set recordings on my Sky+. I do not use it for, nor have any desire to use it for actually watching Mobile TV.
    All of these apps work absolutely fine over my home WiFi network. It's when I try to use them over 3G (my Vodafone Live! connection) that I start running in to trouble.
    All 3 give me connection problems, errors, and simply refuse to load half the time when on 3G. I got so annoyed I just did a hard reset the other week, and magically all three started working again. However, now 2 of them are failing me again. YouTube (touch wood) is working fine at the moment, but iPlayer and Sky Mobile just aren't.
    iPlayer sometimes works. But sometimes I get script errors (unable to load content), and sometimes it says something about checking my connection settings. I wouldn't mind but it's not actually possible to access any options for the iPlayer. Even in application settings there are no options you're able to set.
    Sky Mobile simply flat out refuses to work ever on 3G. But it did after I did a hard reset for a couple of weeks, now it just stopped working! It wont even load. It just gives the error message 'Unable to connect to network - please check connection settings" or something along those lines.
    I've tried so many different things. Tried setting my internet connections to 'always ask', tried setting it to default to Vodafone Live! all the time, tried setting my video streaming settings to WAP, all sorts. Every combination I can think of.
    I just can't wait to get rid of this phone. I've put so many people off buying one. They see it and think it's all swish and cool, and I just say 'Don't. You'll regret it'. I can't wait for my contract to be up so I can upgrade to an iPhone now Vodafone have got them.
    Can anyone help with these problems? Thanks in advance, but I don't hold out much hope...

    About iPlayer.
    Have a chat with Vodaphone. Streaming iPlayer over 3G IS allowed on Vodaphone contract, unlike my O2 contract. As long as your contract allows it, and you have the correct AP address, it should be fine. Vodaphone should be able to give you the setting.
    Mine only works over Wlan.
    FWIW, "... streaming over 3G is not currently available on iPhone handsets on any mobile network".
    p.s. Just to be clear. You say  "Tried setting my internet connections to 'always ask', tried setting it to default to Vodafone Live!".
    iPlayer uses the Nokia browser "Web". So that's where you should make the setting "Ask when needed". It should then offer you the choice of whatever you've set in Destinations> Internet> then select whatever you've chosen as your GPRS connection.(as advised, or sent to you by Vodaphone).

  • Help with triggers

    Hi All,
    i have a few triggers that I need your help with.
    The first trigger (below) is fired when an update is made to a column in an invoices table.
    The question I have is to do with the exception section.
    I want to change the status of the invoice if it fails to F.
    This trigger has already complied fine but I have no test data yet to test against.
    I was unsure of the mutating effect and was wondering if the exception section will cause it to mutate since it is trying to update the status of the current invoice being processed. Pls see below
    create or replace
    TRIGGER POP_STAGE AFTER
    UPDATE OF "EXCHANGED_DATE" ON "INVOICES" FOR EACH ROW
    declare
    -- check if the invoice.mco_transfer_status has been updated to R
    -- if it has then insert records into the relevant tables
    -- Start the Insert based on the update of invoices.mco_transfer_status
    ecode varchar2(100);
    thisproc CONSTANT VARCHAR2(80) := 'trap_errmesg for transfer_status';
    v_value varchar2(150);
    BEGIN
    -- do updates based on update of invoices.transfer_status column
    IF :NEW.TRANSFER_STATUS='R'
    THEN
    -- Insert into E_TICKET_STAGE
    INSERT INTO E_TICKET_STAGE (emco_document_number,exchanged_date,pax_seq,pax_forename,pax_surname,pax_type)
    select :NEW.EMCO_DOCUMENT_NUMBER, :NEW.EXCHANGED_DATE,PX.PAX_SEQ,PX.FORENAME,PX.SURNAME,PX.PAX_TYPE
    FROM PAX PX WHERE PX.BOOKING_ID=:NEW.BOOKING_ID;
    -- Insert into SECTOR_STAGE table
    INSERT INTO SECTOR_STAGE (emco_document_number,ps_id,sector_seq,pax_seq,fare_class,fare_basis,net_fare,tax,gross_fare,
    flight_number,departure_date,dep_airport_code,dest_airport_code)
    SELECT :NEW.EMCO_DOCUMENT_NUMBER, PS.PS_ID,PS.SECTOR_SEQ,PS.PAX_SEQ,PS.FARE_CLASS,PS.FARE_BASIS,PS.NET_FARE,PS.TAX,PS.GROSS_FARE,BS.FLIGHT_NUMBER,BS.DEPARTURE_DATE,
    BS.DEP_AIRPORT_CODE,BS.DEST_AIRPORT_CODE
    FROM PAX_SECTORS PS, BOOKING_SECTORS BS
    WHERE PS.BOOKING_ID=:NEW.BOOKING_ID
    AND BS.BOOKING_ID=PS.BOOKING_ID;
    -- Insert into TAX_STAGE table
    INSERT INTO TAX_STAGE (emco_docUment_number,PS_ID,TAX_SEQ,TAX_CODE,VALUE)
    SELECT :NEW.EMCO_DOCUMENT_NUMBER, pt.PS_ID,TAX_SEQ,TAX_CODE,VALUE
    FROM PAX_TAX pt,PAX_SECTORS ps
    WHERE ps.BOOKING_ID=:OLD.booking_id and pt.PS_ID=ps.PS_ID;
    -- Insert into CHARGES_STAGE table
    insert into CHARGES_STAGE (emco_document_number,CHARGE_TYPE,CHARGE_AMOUNT)
    select :NEW.EMCO_DOCUMENT_NUMBER, CHARGE_TYPE,VALUE FROM INVOICE_DETAILS IND
    WHERE :NEW.INVOICE_ID=IND.INVOICE_ID;
    END IF;
    EXCEPTION
    WHEN OTHERS THEN
    ecode := SQLCODE|| ' '||sqlerrm ;
    dbms_output.put_line(thisproc || ' - ' || ecode);
    v_value := thisproc || ' - ' || ecode;
    -- Insert into DOCUMENT_STATUS_STAGE ANY ERRORS DURING PROCESSING
         insert into DOCUMENT_STATUS_STAGE (EMCO_DOCUMENT_NUMBER, STATUS,STATUS_DATE)
    VALUES (:NEW.EMCO_DOCUMENT_NUMBER,v_value,sysdate);
    update invoices set TRANSFER_STATUS='F' where invoice_id=:old.invoice_id;
    END pop_stage;
    The second trigger (also below) does a check on the payments table to see if the payment_complete date has been set.
    If this has been set then we want to sum all the payments (based on invoice_id). once this sum has been made we want to compare this value to the value of the gross amount on the invoices table for that invoice. if they match (which shows the invoce has been fully paid) then we want to update the paid_date and set to sysdate.
    create or replace
    TRIGGER CHECK_INVOICE_STATUS AFTER
    UPDATE OF "PAYMENT_COMPLETE" ON "PAYMENTS" FOR EACH ROW
    declare
    -- check if all the payments for that invoice have been received (completed)
    -- if they are complete then sum all the payments for that invoice and compare to gross value on invoices
    v_invoice_amount number;
    v_gross_amount number;
    thisproc CONSTANT VARCHAR2(80) := 'trap_errmesg for mco_transfer_status';
    v_value varchar2(150);
    BEGIN
    IF :NEW.PAYMENT_COMPLETE is not null
    THEN
    -- We will sum all the payments for that invoice that have a value in payment_complete
    select sum(amount) into v_invoice_amount from payments where payment_complete is not null
    group by :OLD.INVOICE_ID;
    -- We will also get the gross amount for the invoice to compare to the sum of the payments
    select gross into v_gross_amount from invoices where
    :OLD.INVOICE_ID = invoice_id;
    END IF;
    IF v_invoice_amount = v_gross_amount
    then
    update invoices set paid_date=sysdate;
    end if;
    end CHECK_INVOICE_STATUS;
    Is this trigger sufficent?
    Any tips will be appreciate.
    Thanks

    I didn't really look into your post (rather long) ... anyway, I have 2 words for you "stored procedures".

  • Help with Blu Ray burning requested

    I've been using PRE for many years now very succesfully with no significant problems until I entered the world of HD and Blu Ray. My system specs are at the bottom of this post.  I've been recording HD for some years now on my Sony HDV camcorder and rewriting the final production back onto HDV tapes.  I recently decided to move up and get myself a blu ray writer now that burners and media have become affordable (well relatively) . . . and the beginning of all my problems.
    Normally I create 10 minute final productions from about an hour of footage; however, after a 3-week trip to China, I've created a 50 minute production from which I want to create a Blu Ray disk.  The production contains quite a lot of transitions, titles and still images (taken with 10 Megapixel camera).
    I can render the project OK although it does take quite a few hours.  However, my system crashes (Blue Screen) at about 85% of the way through the Blu Ray encoding process.  I've split the project into 2 seperate projects - one of 20 minutes and one of 30 minutes.  The 20 minute one burns to Bly Ray ok but the 30 minute project still crashes (Blue Screen again) towards the end.  One obvious solution would be to split the project down in to 3 seperate projects and burn to 3 Blu Ray disks but this kind of ruins the point of having a Blu Ray writer as I could have created 3 AVCHD DVD disks instead.
    The problem seems to be lack of memory.  The encoding process seems to work in the 1 - 2 GB space until very near the end when the memory requirement seems to soar up to 4 GB limit.  My suspicion is that Premiere is trying to use all the system memory and tramples over the system needs hence causing the whole system to Blue Screen.
    I've scoured through the various forums and have found that lots of other users have had similar problems but not found any solutions.  Has anyone managed to create a decent sized Blu Ray disk from Premiere Elements - and, does anyone know the minimum configuration for doing this. 
    System:
    Premiere Elements 8
    Sony Viao VPCCW1S1E - Intel Core 2 Duo P7450 running Windows 7, 4 GB memory with everything running on the system c: drive.with 150 GB free.
    NVidea GeForce GT 230M video adaptor
    Thanks Steve

    Steve,
    First a question: what is the size of your still images in pixel x pixel dimensions?
    Now, a BSOD is almost always a hardware issue. The most common causes are:
    1.) Heat build up, especially with regard to the CPU
    2.) RAM - usually a block going bad
    3.) Powersupply either under powered for the load, going bad or perhaps a rail not being up to the necessary voltage.
    3.) MoBo - often a soldered connection (could be almost anywhere in the bus) heating up and separating.
    First thing that I would do would be to turn OFF Reboot on Error, in hopes that there will be something useful on the BSOD. Next, I would download and install SpeedFan, which will monitor every sensor on your computer. Along the way, I would check the operations of all fans, and clean out any dust. Run the system under the same load, but with SpeedFan's GUI up. Watch the temps everywhere.
    This ARTICLE's links will point you to several great utilities, including SpeedFan.
    There are also RAM testing utilities, and I would run those.
    Check the output of your power supply and check that against what is needed for each rail. Do not forget to add the load of your new BD burner.
    In case the BSOD screen does not offer any help (often it's just bunches of code, that no one can gather any info from), this ARTICLE will give you tips on finding out clues as to what is happening on your computer, when the BSOD happens.
    Though it will likely not help, as a BSOD is most often hardware related, but this ARTICLE will help you get your system ready (once the BSOD issue is solved) for Video editing.
    Last, having only one HDD is a big handicap when editing Video, and doubly so with HD. One needs an absolute minimum of 2x 7200 RPM (min.) HDD's, and my recommended minimum is 3x. For HD playback, Adobe recommends at least a RAID 0 for the media drive, for PrPro. PrE is not that much different, regarding real-world system requirements for HD.
    Good luck,
    Hunt

  • Need help with my addressbook program

    hi,
    i need help with my program here. this one should works as:
    - saves user input into a txt file
    - displays name of the saved person on the jlist whenever i run the program
    - displays info about the person when clicked via textboxes given by reading the txt file where the user inputs are
    - should scroll when the list exceeds the listbox
    import java.awt.event.*;
    import java.awt.*;
    import javax.swing.*;
    import javax.swing.JList;
    import java.awt.event.ActionListener;
    import java.io.*;
    import javax.swing.event.*;
    import java.io.FilterInputStream;
    public class AddressList extends JPanel implements ActionListener
         JTextField txt1 = new JTextField();
         JTextField txt2 = new JTextField();
         JTextField txt3 = new JTextField();
         DefaultListModel mdl = new DefaultListModel();
         JList list = new JList();
         JScrollPane listScroller = new JScrollPane(list);
         ListSelectionModel listSelectionModel;
         File fob = new File("Address3.txt");
         String name;
         char[] chars;     
         public void ListDisplay()
              try
                   RandomAccessFile rand = new RandomAccessFile(fob,"rw");
                   BufferedReader br = new BufferedReader(new FileReader("Address3.txt"));
                   if(fob.exists())
                         while((name = rand.readLine()) != null)
                              chars = name.toCharArray();
                              if(chars[0] == '*')
                                   mdl.addElement(name);
                                   list.setModel(mdl);
                              if(chars[0] == '#')
                                   continue;
                    else
                        System.out.println("No such file..");
              catch(IOException a)
                         System.out.println(a.getMessage());
         public AddressList()
              this.setLayout(null);
              listSelectionModel = list.getSelectionModel();
            listSelectionModel.addListSelectionListener(new ListInfo());
              list.setBounds(10,40,330,270);
              listScroller.setBounds(320,40,20,100);
              add(list);
              add(listScroller);
              JLabel lbl4 = new JLabel("Name: ");
              lbl4.setBounds(400,10,80,30);
              add(lbl4);
              JLabel lbl5 = new JLabel("Cellphone #: ");
              lbl5.setBounds(400,50,80,30);
              add(lbl5);
              JLabel lbl6 = new JLabel("Address: ");
              lbl6.setBounds(400,90,80,30);
              add(lbl6);
              JLabel lbl7 = new JLabel("List ");
              lbl7.setBounds(10,10,100,30);
              add(lbl7);
              txt1.setBounds(480,10,200,30);
              add(txt1);
              txt2.setBounds(480,50,200,30);
              add(txt2);
              txt3.setBounds(480,90,200,30);
              add(txt3);
              JButton btn1 = new JButton("Add");
              btn1.setBounds(480,130,100,30);
              btn1.addActionListener(this);
              btn1.setActionCommand("Add");
              add(btn1);
              JButton btn2 = new JButton("Save");
              btn2.setBounds(480,170,100,30);
              btn2.addActionListener(this);
              btn2.setActionCommand("Save");
              add(btn2);
              JButton btn3 = new JButton("Cancel");
              btn3.setBounds(480,210,100,30);
              btn3.addActionListener(this);
              btn3.setActionCommand("Cancel");
              add(btn3);
              JButton btn4 = new JButton("Close");
              btn4.setBounds(480,250,100,30);
              btn4.addActionListener(this);
              btn4.setActionCommand("Close");
              add(btn4);
         public static void main(String[]args)
              JFrame frm = new JFrame("Address List");
              AddressList panel = new AddressList();
              frm.getContentPane().add(panel,"Center");
              frm.setSize(700,350);
              frm.setVisible(true);
              panel.ListDisplay();
         public void actionPerformed(ActionEvent e)
              String cmd;
              cmd = e.getActionCommand();
              if(cmd.equals("Add"))
                   txt1.setText("");
                   txt2.setText("");
                   txt3.setText("");
              else if(cmd.equals("Save"))
                   mdl.addElement(txt1.getText());
                   list.setModel(mdl);
                   try
                   RandomAccessFile rand = new RandomAccessFile(fob,"rw");
                   BufferedReader br = new BufferedReader(new InputStreamReader(System.in));
                   LineNumberReader line = new LineNumberReader(br);
                    if(fob.exists())
                              rand.seek(fob.length());
                              rand.writeBytes("* " + txt1.getText());
                              rand.writeBytes("\r\n" + "# " + txt2.getText());
                              rand.writeBytes("\r\n" + "# " + txt3.getText() + "\r\n");
                    else
                         System.out.println("No such file..");
                        txt1.setText("");
                        txt2.setText("");
                        txt3.setText("");
                    catch(IOException a)
                         System.out.println(a.getMessage());
              else if(cmd.equals("Cancel"))
                   txt1.setText("");
                   txt2.setText("");
                   txt3.setText("");
              else if(cmd.equals("Close"))
                   System.exit(0);
    class ListInfo implements ListSelectionListener
         public void valueChanged(ListSelectionEvent e)
              ListSelectionModel lsm = (ListSelectionModel)e.getSource();
              int minIndex = lsm.getMinSelectionIndex();
            int maxIndex = lsm.getMaxSelectionIndex();
              try //*this one should display the info of the person whenever i click the person's name at the list box via textbox.. but i cant seem to get it right since it always display the info of the first person inputed.. i tried to get the program to display them whenever it reads lines with * on them....
                   File fob = new File("Address3.txt");
                   RandomAccessFile rand = new RandomAccessFile(fob,"rw");
                   BufferedReader br = new BufferedReader(new FileReader("Address3.txt"));
                   LineNumberReader line = new LineNumberReader(br);
                   if(fob.exists())
                              for(int i = minIndex; i<=maxIndex; i++)
                                   if(lsm.isSelectedIndex(i))
                                        while((name = rand.readLine()) != null)
                                             chars = name.toCharArray();
                                             if(chars[0] == '#')
                                                  continue;
                                             if(chars[0] == '*')
                                                  txt1.setText(rand.readLine());
                                                 txt2.setText(rand.readLine());
                                                 txt3.setText(rand.readLine());
                    else
                              System.out.println("No such file..");
              catch(IOException a)
                         System.out.println(a.getMessage());
    }the only problem now is about how it should display the right info about the person whenever i click its name on the list.. something about file reading or something, i just cant figure it out.
    and also about how to make it scroll once it exceeds the list.. i cant make it work, maybe something about wrong declaration..
    thanks in advance..
    Edited by: syder on Mar 14, 2008 2:26 AM

    Like said before, do one thing at a time. At startup, something like:
    //put all the content in a list
    ArrayList<String> lines = new ArrayList<String>();
    while(String line=rand.readLine()!=null) {
        lines.add(line);
    }If you follow the good advice to create a class to encapsulate the entries, you could populate a list of such entries like this:
    static final int ENTRY_SIZE = 3;//you have 3 fields now, better to have a constant if that changes
    ArrayList<Entry> entries = new ArrayList<Entry>();
    for(int i=0; i<lines.size(); i+=ENTRY_SIZE) {
        Entry entry = new Entry(lines.get(i), lines.get(i+1), lines.get(i+2);
        entries.add(newEntry);
    }You could also do both of the above in one run, but I think you will understand better what's happening if you do one thing at a time.
    If you don't want to put the entries in an encapsulating class, you can still access this without looping:
    int listStartIdx = <desired_entry_index>*ENTRY_SIZE;
    String att1 = lines.get(listStartIdx).substring(1);
    String att2 = lines.get(listStartIdx+1).substring(1);
    String att3 = lines.get(listStartIdx+2).substring(1);

  • Help with partial image loss from Viewer to Canvas

    Hi--I'm brand new to FCP and would really appreciate any help with my problem. I'm creating 2 second video clips composed of four still images (15 frames...or 500ms each) laid back to back, then rendered. Very simple, I know. The individual images are tiff files that look great in the FCP Viewer. But in the Canvas, part of the image is missing. Specifically, in the center of each image there should be a + sign, about 1cm square. This + should remain constant thoughout the short movie, while the items around it vary (from image to image). (This is a psychology experiment, and the center + is a fixation cross.) The problem is that in the Viewer the + sign is intact, but in the Canvas (and the resulting rendered video), only the vertical bar of the + is present! This is true for every individual tiff, and for the resulting movie. The items around the fixation cross are fine. My question is WHY on earth does the central horizontal bar get "lost" between the Viewer and the Canvas? I've read the manuals, but obviously I've got something set wrong. Also, there is a considerable overall reduction in quality between the viewer and canvas, even though I'm trying my best to maximize video quality. Everything looks a bit blurry. Truly, all ideas are welcome. Sorry if it's obvious. Thanks.
    G5   Mac OS X (10.4.3)  

    steve, i'm viewing on my 23" cinema screen. i read up on quality and know that this is a no-no; that i should only judge quality when viewing on an ntsc monitor or good tv. the problem is that i'll ultimately be displaying these videos on my Dell LCD, so i've got to maximize what i've got. thanks to the discussion boards i have a short list of things to try now. thanks!
    -heather

  • How could I replace hard coded value in my sql query with constant value?

    Hi all,
    Could anyone help me how to replace hardcoded value in my sql query with constant value that might be pre defined .
    PROCEDURE class_by_day_get_bin_data
         in_report_parameter_id   IN   NUMBER,
         in_site_id               IN   NUMBER,
         in_start_date_time       IN   TIMESTAMP,
         in_end_date_time         IN   TIMESTAMP,
         in_report_level_min      IN   NUMBER,
         in_report_level_max      IN   NUMBER
    IS
      bin_period_length   NUMBER(6,0); 
    BEGIN
      SELECT MAX(period_length)
         INTO bin_period_length
        FROM bin_data
         JOIN site_to_data_source_lane_v
           ON bin_data.data_source_id = site_to_data_source_lane_v.data_source_id
         JOIN bin_types
           ON bin_types.bin_type = bin_data.bin_type 
       WHERE site_to_data_source_lane_v.site_id = in_site_id
         AND bin_data.start_date_time     >= in_start_date_time - numtodsinterval(1, 'DAY')
         AND bin_data.start_date_time     <  in_end_date_time   + numtodsinterval(1, 'DAY')
         AND bin_data.bin_type            =  2
         AND bin_data.period_length       <= 60;
      --Clear the edr_class_by_day_bin_data temporary table and populate it with the data for the requested
      --report.
      DELETE FROM edr_class_by_day_bin_data;
       SELECT site_to_data_source_lane_v.site_id,
             site_to_data_source_lane_v.site_lane_id,
             site_to_data_source_lane_v.site_direction_id,
             site_to_data_source_lane_v.site_direction_name,
             bin_data_set.start_date_time,
             bin_data_set.end_date_time,
             bin_data_value.bin_id,
             bin_data_value.bin_value
        FROM bin_data
        JOIN bin_data_set
          ON bin_data.bin_serial = bin_data_set.bin_serial
        JOIN bin_data_value
          ON bin_data_set.bin_data_set_serial = bin_data_value.bin_data_set_serial
        JOIN site_to_data_source_lane_v
             ON bin_data.data_source_id = site_to_data_source_lane_v.data_source_id
            AND bin_data_set.lane = site_to_data_source_lane_v.data_source_lane_id
        JOIN (
               SELECT CAST(report_parameter_value AS NUMBER) lane_id
                 FROM report_parameters
                WHERE report_parameters.report_parameter_id    = in_report_parameter_id
                  AND report_parameters.report_parameter_group = 'LANE'
                  AND report_parameters.report_parameter_name  = 'LANE'
             ) report_lanes
          ON site_to_data_source_lane_v.site_lane_id = report_lanes.lane_id
        JOIN (
               SELECT CAST(report_parameter_value AS NUMBER) class_id
                 FROM report_parameters
                WHERE report_parameters.report_parameter_id    = in_report_parameter_id
                  AND report_parameters.report_parameter_group = 'CLASS'
                  AND report_parameters.report_parameter_name  = 'CLASS'
             ) report_classes
          ON bin_data_value.bin_id = report_classes.class_id
        JOIN edr_rpt_tmp_inclusion_table
          ON TRUNC(bin_data_set.start_date_time) = TRUNC(edr_rpt_tmp_inclusion_table.date_time)
       WHERE site_to_data_source_lane_v.site_id = in_site_id
         AND bin_data.start_date_time     >= in_start_date_time - numtodsinterval(1, 'DAY')
         AND bin_data.start_date_time     <  in_end_date_time   + numtodsinterval(1, 'DAY')
         AND bin_data_set.start_date_time >= in_start_date_time
         AND bin_data_set.start_date_time <  in_end_date_time
         AND bin_data.bin_type            =  2
         AND bin_data.period_length       =  bin_period_length;
    END class_by_day_get_bin_data;In the above code I'm using the hard coded value 2 for bin type
    bin_data.bin_type            =  2But I dont want any hard coded number or string in the query.
    How could I replace it?
    I defined conatant value like below inside my package body where the actual procedure comes.But I'm not sure whether I have to declare it inside package body or inside the procedure.
    bin_type     CONSTANT NUMBER := 2;But it does't look for this value. So I'm not able to get desired value for the report .
    Thanks.
    Edited by: user10641405 on May 29, 2009 1:38 PM

    Declare the constant inside the procedure.
    PROCEDURE class_by_day_get_bin_data(in_report_parameter_id IN NUMBER,
                                        in_site_id             IN NUMBER,
                                        in_start_date_time     IN TIMESTAMP,
                                        in_end_date_time       IN TIMESTAMP,
                                        in_report_level_min    IN NUMBER,
                                        in_report_level_max    IN NUMBER) IS
      bin_period_length NUMBER(6, 0);
      v_bin_type     CONSTANT NUMBER := 2;
    BEGIN
      SELECT MAX(period_length)
        INTO bin_period_length
        FROM bin_data
        JOIN site_to_data_source_lane_v ON bin_data.data_source_id =
                                           site_to_data_source_lane_v.data_source_id
        JOIN bin_types ON bin_types.bin_type = bin_data.bin_type
       WHERE site_to_data_source_lane_v.site_id = in_site_id
         AND bin_data.start_date_time >=
             in_start_date_time - numtodsinterval(1, 'DAY')
         AND bin_data.start_date_time <
             in_end_date_time + numtodsinterval(1, 'DAY')
         AND bin_data.bin_type = v_bin_type
         AND bin_data.period_length <= 60;
      --Clear the edr_class_by_day_bin_data temporary table and populate it with the data for the requested
      --report.
      DELETE FROM edr_class_by_day_bin_data;
      INSERT INTO edr_class_by_day_bin_data
        (site_id,
         site_lane_id,
         site_direction_id,
         site_direction_name,
         bin_start_date_time,
         bin_end_date_time,
         bin_id,
         bin_value)
        SELECT site_to_data_source_lane_v.site_id,
               site_to_data_source_lane_v.site_lane_id,
               site_to_data_source_lane_v.site_direction_id,
               site_to_data_source_lane_v.site_direction_name,
               bin_data_set.start_date_time,
               bin_data_set.end_date_time,
               bin_data_value.bin_id,
               bin_data_value.bin_value
          FROM bin_data
          JOIN bin_data_set ON bin_data.bin_serial = bin_data_set.bin_serial
          JOIN bin_data_value ON bin_data_set.bin_data_set_serial =
                                 bin_data_value.bin_data_set_serial
          JOIN site_to_data_source_lane_v ON bin_data.data_source_id =
                                             site_to_data_source_lane_v.data_source_id
                                         AND bin_data_set.lane =
                                             site_to_data_source_lane_v.data_source_lane_id
          JOIN (SELECT CAST(report_parameter_value AS NUMBER) lane_id
                  FROM report_parameters
                 WHERE report_parameters.report_parameter_id =
                       in_report_parameter_id
                   AND report_parameters.report_parameter_group = 'LANE'
                   AND report_parameters.report_parameter_name = 'LANE') report_lanes ON site_to_data_source_lane_v.site_lane_id =
                                                                                         report_lanes.lane_id
          JOIN (SELECT CAST(report_parameter_value AS NUMBER) class_id
                  FROM report_parameters
                 WHERE report_parameters.report_parameter_id =
                       in_report_parameter_id
                   AND report_parameters.report_parameter_group = 'CLASS'
                   AND report_parameters.report_parameter_name = 'CLASS') report_classes ON bin_data_value.bin_id =
                                                                                            report_classes.class_id
          JOIN edr_rpt_tmp_inclusion_table ON TRUNC(bin_data_set.start_date_time) =
                                              TRUNC(edr_rpt_tmp_inclusion_table.date_time)
         WHERE site_to_data_source_lane_v.site_id = in_site_id
           AND bin_data.start_date_time >=
               in_start_date_time - numtodsinterval(1, 'DAY')
           AND bin_data.start_date_time <
               in_end_date_time + numtodsinterval(1, 'DAY')
           AND bin_data_set.start_date_time >= in_start_date_time
           AND bin_data_set.start_date_time < in_end_date_time
           AND bin_data.bin_type = v_bin_type
           AND bin_data.period_length = bin_period_length;
    END class_by_day_get_bin_data;

Maybe you are looking for

  • Junk Mail in Inbox

    Starting on December 26, 2012 I began getting 8-10 spam emails within a one hour period. I have a @me.com account. The spam mail I received was not marked as Junk and showed up in my inbox. After researching, I found that you could "train" the mail t

  • Error in BIC MODULE BIC MODULE modules:  trigger file [not specified] conta

    Hello, i have a problem with the BIC Seeburger MD Scenario overview: IDoc Invoice02 => Message Mapping (Seeburger content) => FTP Seeburger Comm. Canal integrated with BIC adapter. This works correctly. Then I tested the field mapping and the BIC Ada

  • Restricting Specific OOTB according to Role

    Hi Could you also tell, can we restrict OOTB reports specfic to a role. Say some out of box reports should be visible to procurement executive role and some to Commodity manager? Regards Neel

  • Embedding PDF file in email body

    Hi I have created a data template in EBS and it generates a pdf. Is there any way to embed the content of the pdf in the body of the email instead of sending it as an attachment when bursting? Thanks, Bryan

  • No icon in title bar for notification center

    I have no icon for Notification Center in my title bar.  System prefs seem to show NC is operational, but no icon...