Help with converting AIR-AP1131AG-E-K9 into Standalone AP

Hi members I have a Brand new AP that was bought for a site which has a controller, however it was never installed. I was wondering can you downgrade this AP to make it work in stand alone mode as a normal AP?
I tried to get some support from Cisco but because it is old their is no support agreement or warranty with it.
Many thanks in advance.

Hi,
Air-Ap1131 going by model is a standalone AP and AIR-LAP is a lightweight model. By default this should have an autonomous image. If you check show version, you can see if it is running k9w7 or k9w8 image.
k9w7 is autonomous and k9w8 is lightweight.
If it is running a lightweight image, you can download autonomous software and convert it.
Ref link :
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
Regards,
Madhuri

Similar Messages

Help with converting a Nero file

I have previously converted a dvd insert designed with Nero into a pdf using adobe acrobat in order to send to someone else. When I tried to do the same thing today with a new Nero designed insert the conversion wouldn't work. The message said adobe didn't support the program that created the file. Any ideas?

thanks for your response.
When I create a dvd insert or cd label etc using Nero the file extension is nct - nero cover template. The printer wants the file as a pdf as he can't open Nero files. I have version 9.3 of acrobat.
Date: Mon, 18 Jan 2010 21:43:47 -0700
From: [email protected]
To: [email protected]
Subject: help with converting a Nero file
Nero is simply a CD/DVD burning application and should have no effect on the type of files that will eventually be on the CD/DVD.
What type of files are you trying to convert and exactly how are you trying to convert them? Plus, it would help to know the version of Acrobat you are using.
>

Problem converting air-ap1131ag-a-k9 to Lwapp

i have a person on my team who converted some autonomoous air-ap1131ag-a-k9 to lwapp. I don't think they did it right.
what they did is , booted the ap ( at this point it was running in autonomous mode), set the ip to 192.168.1.200 and their laptop to 192.168.1.100 connected the laptop directly to the AP. (I have found out that these AP's were old AP's that previously had configs on them, ( static ips, a whole config) they came from another building , they were the ones that other lwapps replaced.)
they then went to the web gui of the AP , went to software upgrade and loaded the lwapp recovery image on the ap (c1130-rcvk9w8-tar.124-10b.JA3.tar). the software loaded fine, and converted the AP . and thats all they did
(I had mentioned that we should use the upgrade tool, but they didn't listen)
the aps got mounted , on the ceiling in the hospital, but when they went to turn them on, they didnt show up right on the controller , they kept joining and unjoining..
i think there is a problem with the SSC, i remember, something like the time had to be the same on the ap and on the WLC.
anyways, these could be older AP's before 2005 ( unknown to me) which would mean they dont hav MIC's and have SSC. and the ap is refusing them is my thought.
the WLC is setup to accept self signed certs.
anyways...
these aps are now mounted on the ceilings , and when you do a show cdp nei, it has an ip address from when it was an autonomous ap.
Also, what is the best process you have found to convert Old autonomous 1131 AP's to lightweight mode?
thanks
the controller is running 4.2.176 WLC code. i currently don't have Access to WCS or a spare controller to use with the upgrade utility.
the controller is a 4404-100

i went to the wlc and issued the command
debug lwapp events enable
i got the following output
Sat Jun 13 12:41:51 2009: 00:11:20:1a:07:a9 Received LWAPP JOIN REQUEST from AP 00:11:20:1a:07:a9 to 06:0a:10:10:00:00 on port '29'
Sat Jun 13 12:41:51 2009: 00:11:20:1a:07:a9 AP AP0011.201a.07a9: txNonce 00:00:00:00:00:00 rxNonce 00:00:00:00:00:00
Sat Jun 13 12:41:51 2009: 00:11:20:1a:07:a9 LWAPP Join Request MTU path from AP 00:11:20:1a:07:a9 is 1500, remote debug mode is 0
Sat Jun 13 12:41:51 2009: 00:11:20:1a:07:a9 Processing Radius Response: AP Authorization failure for 00:11:20:1a:07:a9
Sat Jun 13 12:41:54 2009: 00:1e:f7:ed:e8:aa Did not receive hearbeat reply from AP 00:1e:f7:ed:e8:aa
Sat Jun 13 12:41:54 2009: DTL Deleting AP 5 - 0.0.0.0
Sat Jun 13 12:41:55 2009: 00:11:21:89:fb:30 Received LWAPP ECHO_REQUEST from AP 00:11:21:89:fb:30
Sat Jun 13 12:41:55 2009: 00:11:21:89:fb:30 Successful transmission of LWAPP Echo-Response to AP 00:11:21:89:fb:30
Sat Jun 13 12:41:55 2009: 00:21:55:c2:06:20 Received LWAPP DISCOVERY REQUEST from AP 00:21:55:c2:06:20 to ff:ff:ff:ff:ff:ff on port '29'
Sat Jun 13 12:41:56 2009: 00:11:5c:03:3c:b0 Received LWAPP RRM_DATA_REQ from AP 00:11:5c:03:3c:b0
Sat Jun 13 12:41:56 2009: 00:11:5c:03:3c:b0 Successful transmission of LWAPP Airewave-Director-Data Response to AP 00:11:5c:03:3c:b0
Sat Jun 13 12:41:56 2009: 00:11:5c:03:3c:b0 Received LWAPP RRM_DATA_REQ from AP 00:11:5c:03:3c:b0
Sat Jun 13 12:41:56 2009: 00:11:5c:03:3c:b0 Successful transmission of LWAPP Airewave-Director-Data Response to AP 00:11:5c:03:3c:b0
Sat Jun 13 12:41:56 2009: 00:11:5c:03:3c:b0 Received LWAPP RRM_DATA_REQ from AP 00:11:5c:03:3c:b0
Sat Jun 13 12:41:56 2009: 00:11:5c:03:3c:b0 Successful transmission of LWAPP Airewave-Director-Data Response to AP 00:11:5c:03:3c:b0
Sat Jun 13 12:41:56 2009: 00:11:5c:03:3c:b0 Received LWAPP STATISTICS_INFO from AP 00:11:5c:03:3c:b0
Sat Jun 13 12:41:56 2009: 00:11:5c:03:3c:b0 Successful transmission of LWAPP Statistics Info Response to AP 00:11:5c:03:3c:b0
Sat Jun 13 12:41:58 2009: 00:1d:70:f4:3e:50 Received LWAPP DISCOVERY REQUEST from AP 00:1d:70:f4:3e:50 to ff:ff:ff:ff:ff:ff on port '29'
can someone help me decipher what it means, i think i need to debug to get the sha key.
there are about 14 new ap's. and they all have problems.
thanks

Help with converting FLAC to ALAC while retaining metadata and cover art

Hi,
I've decided to embark on the long trek to convert my 18k+ FLAC music library into ALAC. I've decided on ALAC for mainly 2 reasons: iTunes/iPhone/iMac/Sonos compatibility and my desire to keep with a lossless format.
My library is pretty eclectic; I have quite a bit of classical music along with many other genres. I have spent quite a bit of time maintaining the correct tag information; I do not want to lose any of this info that I've painstakingly added to my library over the years. The tags that I use on my FLAC files are:
Filename
Title
Artist
Album
Album Artist
Disc Number
Disc Count
Compilation
Comment
Year
Genre
Track
Composer
Orchestra
Conductor
Performer
Length
Modified
Path
I want to be especially sure that I maintain the data in Composer, Orchestra, Performer and Conductor in my migration to ALAC. I also want to include my CD art in each track (many of which I had to scan since some of my CD's are not available for sale). The CD covers are stored in a "folder.jpg" file in the path of each CD's contents. I would really like the automated conversion process to pick up each "folder.jpg" and embed it in the appropriate tracks.
I have a license for dbPowerAmp, so I can do the conversion on the Windows side if need be (I have BootCamp set up and use Fusion), but I would prefer to do everything in Mac.
I am hoping that some of you good folks will offer up comments about the feasibility of this endeavor, and advise me on possible tools to use, paths to take, pitfalls to watch out for, etc.
Thank you for your time.
Mike

I finally got done with the conversion. It took 2 weeks running XLD of 24x7, but at last it's over with.
I first used iTunes "download missing album art" to start the process. It populated about 50% of my collection, but I found that many of the album art was wrong. For instance, with collections (various artists) it populated the album art from the first track; with others, it put in the wrong album cover for the right CD. These were mostly because iTunes would get a contemporary cover, where my cover was from an older pressing of the disk.
I purchased a program called TuneUp which has helped with my missing album artwork, and also with correcting typos. But even with using TuneUp, I probably have a couple of weeks worth of work left to do.
Then comes the renaming of the Classical music tracks.
Mike

Help with Converting an Access query

Hello:
First time poster and would appreciate some help in converting this Access query into T-SQL so I can use in a Stored Procedure. I don't need help in resolving the syntax for the variables as parameter in the second query, but stuck in writing the first query
in T-SQL . I assume I need some type of nested query with a left join to another query in T-SQL.
How do I convert this from Access into MS-SQL
SELECT TBL_MONTH.L_Month, TBL_MONTH.L_MonthName
FROM TBL_MONTH LEFT JOIN qry_MonthCheck ON TBL_MONTH.L_Month = qry_MonthCheck.L_Month
WHERE (((qry_MonthCheck.L_Month) Is Null));
qryMonthCheck in Access is defined as
SELECT TBL_MONTH.L_Month, TBL_SIGNOFF.SO_YEAR, TBL_SIGNOFF.SO_USER, TBL_SIGNOFF.SO_LOCATION
FROM TBL_MONTH RIGHT JOIN TBL_SIGNOFF ON TBL_MONTH.L_Month = TBL_SIGNOFF.SO_MONTH
WHERE (((TBL_SIGNOFF.SO_YEAR)=[forms]![frm_signoff]![cboyear]) AND ((TBL_SIGNOFF.SO_LOCATION)=[Tempvars]![tmpVarUserLOC]));

It is very much up to personal taste. For tables I use no prefix at all. Or suffix. I prefer plural: categories, products, etc. For junction tables, I drop the plural in the first entity, for instance productcategories. As for the case, many people prefer
initial uppercase, while I go for lowercase only. But initial uppercase has its points, particularly in documentation. I am a staunch advocate of using case-sensitive collation for metadata. I don't see any point in mixing productcategories, Productcategories,
ProductCategories etc. That can only cause confusion.
As for either entities, I don't use views much, and I don't have any prefix for these either. In fact, several views I've been involved used to be tables once upon a time.
If you want to add a marker to the object name, I recommend using a suffix. It is much easier to find objects in the version control system and other browser, when not everything is cluttered on the same letter. For instance, I typically add _sp at the end
of stored procedure names.
Erland Sommarskog, SQL Server MVP, [email protected]

Need help with converting a Divx file

I am having a **** of a time converting a Divx file to use in FCP.
This is the file I am trying to work with: http://www.archive.org/details/F6FHellcat_PilotInstruction (It's the 164 MB Divx file)
While I have downloaded other Divx files from the same site and used QT to convert them to QT movies, this file is not playable by QT or a number of other programs.
The only program I have found that plays this file is VLC.
When trying to convert to a QT file, VLC is unsuccessful at everything EXCEPT changing the container to QT.
When I change the container, I get a QT file that is playable in QT and FCP, but it does not have audio. This is not a big deal.
The bigger problem is that when I play the new file in QT, the duration matched that of the original file.
When I import the file into FCP, the duration is 2 minutes shorter. The last 2 minutes are missing!
I'd appreciate any suggestions you may have on how to get a usable file from the original.
Thanks.

If the audio is no big deal, you can use Wondershare Video Converter, but it will set you back 40 clams.
You can download a free trial from their site.
http://www.dvd-ripper-copy.com/video-converter-mac.html
I got it to convert successfully and it imported into FCP completely intact...but without audio.

Please Help with Converting PDF document to Word Document

I have downloaded our PDF document to be converted to a word document --- it did not work correctly--we need help with this
Scott Munsen
Abbott House -- Mitchell, SD

Good day Scott,
I received your document via our File Conversion Issue form. The root of the problem you're facing is the quality of the scan. I'm not sure if you were starting with a poor quality hard-copy or simply low DPI settings on your scanner, but the reason the results you received were so different than the PDF was the quality of the input.
If you're hard copy looks clearer than the PDF file you created, I would suggest increasing the resolution settings on your scanner.
Please let me know if you have any questions.
Kind regards,
David

Problems with converting date in one calendar into another.

I am trying to convert, say, today's date into a Hebrew or Japanese calendar and put it into a form so it can be printed. I can convert date components but I can't get it so that I can use it with NSDateFormatter to print the date - it comes out as a Gregorian date even though printed from an NSDate object derived from a Hebrew calendar object.
Is there any sample code I can look at?

I have a compaq 3900 which I sync with ical. I use PocketmacPro.
It is the smoothest sync give it a try.
Isync all my callendars, contacts, transfer word and excell docs.
There tech support is good to

Help With converting px to em...

So, I thought that I would have a go at converting a site from all px to em to help with accessibility and using browser zoom. I wish I'd never started!
This is how I approached it.
     1) Set my font to 100%
     2) Change all font sizes to em
     3) Feel smug
     4) Notice that after a couple of ramps up on the zoom the layout goes pear-shaped
     5) Change all width/height dimensions to em
     6) Change all padding/margin dimensions to em
     7) Feel a little tearful
     8) Realise I don't have a back-up style sheet
     9) Re-draw WWW domination plan
     10) Start to make a little progress
     11) Try out the negative zoom
     12) See that screw my layout - don't understand it
     14) Add some min-width/min-height rules
     12) Feel a little tearful...
     13) Came here to be with friends
I worked out I think, that using flexible units in a fixed environment is going to cause problems.
I'm having trouble with layout more than text-size. I think the only thing that will cause me grief with text-size is with nested element and the way that em is inherited but, the site is quite straight forward, apart from a few floated elements.
I thnk my main problems are with the layout: Images, background images and how to approach the whold width/height thing.
Martin
PS I won't be at my PC for a while so, if you respond and I don't come back to you, it's not because I'm not interested. I'm too ashamed and confused to post a live page!

Hi Martin
The one thing that confuses people when converting from px to em units is that they think px is a fixed size and em's are flexible, which unfortunately is not true, and just to confuse things even more Microsoft even treat px's as a relative size, (this is actually correct if you look at the css1 spec).
The best advice I can offer is to start with the layout when converting to em's and worry about the font etc. later, because as they say a pixel is relative.
PZ

Help with converting array of sentences in to array of words.

Hi! I'm having a problem with converting an array of sentences (about 50) into 1000 separate words into an word array. No use of tokenizers, classes (pre-made) just clear proggramming.
Thanks in advance!

Until you come up with a question, check these out:
http://java.sun.com/docs/books/tutorial/
http://java.sun.com/learning/new2java/index.html
http://javaalmanac.com
http://www.jguru.com
http://www.javaranch.com
Bruce Eckel's Thinking in Java
Joshua Bloch's Effective Java
Bert Bates and Kathy Sierra's Head First Java

Help with converting hex to date and time

Hi!
I am using snmp4j libraries to walk the mib tree. The system date is getting returned in 11 hexadecimal octets. I require help in converting it to date and time. I looked up the RFC convention of what each octets represent. Require help with conversion.
Eg: 07:db:06:0a:29:1d:00:2b:05:1e
Thanks,

Octets Contents Range
1-2 year 0..65536
3 month 1..12
4 day 1..31
5 hour 0..23
6 minutes 0..59
7 seconds 0..60
(use 60 for leap-second)
8 deci-seconds 0..9
9 direction from UTC '+' / '-'
10 hours from UTC 0..13
11 minutes from UTC 0..59
For example I just took the time an hour ago it came out as
07:db:06:13:12:11:1a:00:2b:05:1e
I have to convert this as a date long value to send it.
Do I have to write an utility of my own to do it?

Help! converting two types of video into one format so I can edit

Right Folks, go easy because I’m a novice.
I’m having major problems getting two different types of video to work together in final cut pro 7.
I’ve recorded something with two different HD cameras and I’m totally aware I need to convert them to the same format so I can begin to edit them. I’ve got Mpeg stream clip, could anybody help me convert them?

Hi Dave, one of the cameras I have is Sanyo Xacti VPC-CG10 this shoots onto 16GB SDHC class 2, to work this in final cut I'm aware I have to compress using Apple ProRes 422 Codec which works fine.
The other Camera is a panasonic I have shoots on SDHC Class 6 cards and I usually compress at HDV 720P 25fps. which also works fine.
I can edit both individually, the latter, the panasonic camera is simple to capture and edit and is the camera I use the most but on this particular shoot I need to use both together.
So I think its the Sanyo that's causing me the problem.

Help with converting an applet into an application

Here is a set of code which can work perfectly fine as an applet. But I have problem converting it into an application. Any help? I get some null pointer exception. Thanks alot.
//File Name: Radar.java
//Author: Saad Ayub
import java.applet.Applet;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
class Flash extends Thread{
private DrawA dA;
private int x;
private int xCor[];
private int yCor[];
private int i;
private int dir;
private Image im;
private Graphics buff;
public Flash(DrawA dA, Image im, Graphics buff){
this.dA = dA;
this.im = im;
this.buff = buff;
xCor = new int[451];
yCor = new int[451];
dir = 10;
}//end of Flash constructor
public void run(){
for(x = 75, i = 0; x <= 525; x++, i++){
xCor[i] = x - 300;
for(i = 0; i <= 450; i++){
yCor[i] = (int)Math.sqrt(62500 - (xCor[i] * xCor));
yCor[i] = 300 - yCor[i];
for(x = 0; x <= 450; x++){
xCor[x]+=300;
i = 0;
while(true){
try{
Thread.sleep(35);
catch(Exception e){}
dA.repaint();
i += dir;
if(i < 0 || i > 450){
dir = -dir;
i += dir;
}//end of if
}//end of while
}//end of run
public void draw(Graphics g){
int green = 255;
buff.setColor(Color.black);
buff.fillRect(0, 0, 600, 330);
buff.setColor(new Color(0, 70, 0));
buff.fillArc(50, 50, 500, 500, 25, 130);
buff.setColor(Color.green);
if(i > 450)
return;
if(xCor[i] != 0 && yCor[i] != 0)
buff.drawLine(xCor[i], yCor[i], 300, 300);
if(dir > 0){
for(int j = i; j > (i - 100); j--){
if(j >= 0 && j <= 450){
green -= 2;
buff.setColor(new Color(0, green, 0));
buff.drawLine(xCor[j], yCor[j], 300, 300);
}//end of if
}//end of for
}//end of if
else{
for(int j = i; j < (i + 100); j++){
if(j >= 0 && j <= 450){
green -= 2;
buff.setColor(new Color(0, green, 0));
buff.drawLine(xCor[j], yCor[j], 300, 300);
}// end of if
}//end of for
}//end of else
buff.setColor(Color.green);
buff.drawArc(112, 112, 375, 375, 25, 130);
buff.drawArc(174, 174, 250, 250, 25, 130);
buff.drawArc(238, 238, 125, 125, 25, 130);
buff.drawLine(300, 300, 300, 50);
g.drawImage(im, 0, 0, null);
}//end of draw
}//end of flash class
class DrawA extends Panel{
private Flash fl;
private Image im;
private Graphics buff;
public DrawA(Image im){
this.im = im;
buff = im.getGraphics();
fl = new Flash(this, im, buff);
fl.start();
// setBackground(Color.black);
public void paint(Graphics g){
fl.draw(g);
public void update(Graphics g){
paint(g);
public class Radar extends Applet{
public DrawA dA;
private JLabel display;
public Radar()
display = new JLabel("display");
public void init(){
dA = new DrawA(createImage(600, 330));
setLayout(new BorderLayout());
add(dA, BorderLayout.CENTER);
add(display, BorderLayout.EAST);
public void stop(){
destroy();
Edited by: bozovilla on Oct 20, 2008 8:32 AM

Start out by letting this thread die out...
and repost saying that you forgot to use code tags and describe sufficiently what your problem is--things like the actual error message and where it happens.

Require help with converting a wim file to a vhd file using WIM2VHD

I would like some assistance in learning to actually start the wim2vhd command line tool? I have been supplied an script to go with it but am unsure how to open the whole program? I am required to convert a wim file into a vhd file for a task on a project
but cannot do so without this tool and am having troubles in struggletown trying to complete the task? have been trying to complete this for about a month with holidays in the middle.
Any help is muchly appreciated.

Wim2VHD is not a Windows 7 file, feature, nor utility.
It is a utility supported by MSDN. Suggest you find the appropriate MSDN forum to post in. See info @
http://archive.msdn.microsoft.com/wim2vhd about Wim2VHD.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Need help with converting characters to ASCII code

Hey. Im trying to write a program to make Caesar Ciphers by random numbers. This cipher must also wrap from front to end of ASCII code, so that if, for example, the character being ciphered is Z and its being modified by +3, the result ciphered character is not "]", but "c".
Im planning on reading the text that the user inputs (using ConsoleIO) into a string and then seperating each character into a character[]. Then, i would like to find the ASCII code of each character and print out the ASCII code character of the old ASCII code + the modifier.
So far, this is what i have (sorry for the length, i like to space things out so that its easier on the eyes and more organized... X-( ... ):
public class EvanFinalB {
     static ConsoleIO kbd = new ConsoleIO();
     static String enteredPhrase;
     static int phraseLength;
     public static void main(String[] args)
          System.out.println("Enter a phrase and this program will cipher it into a secret message.");
          System.out.println("/nEnter your phrase here:");
          //read phrase
          enteredPhrase = kbd.toString();
          //find length of entered text
          phraseLength = enteredPhrase.length();
          //declare arrays for the individual characters of the entered text and the ciphered characters
          char[] enteredChar = new char[phraseLength + 1];
          char[] cipheredChar = new char[phraseLength + 1];
          //loop converting of entered text into seperate characters
          for(int x = 1; x <= phraseLength; x++)
               enteredChar[x] = enteredPhrase.charAt(x);
               cipheredChar[x] = cipher(enteredChar[x]);//call cipher() method to find new ciphered character
     //wrap from front to end of ASCII code
     static char cipher(char enteredChar)
          //choose random number to cipher message by
          int modifier = (int)(Math.random() * 26) + 1;
          if(enteredChar + modifier > 90)//90 is the ASCII code for "Z" which is the last capital letter
               cipheredChar = (97 + (modifier - (90 - enteredChar)));//97 is the ASCII code for "a" which is the first lower case letter
          return cipheredChar[1];
}The program is obviously in its early stages but (i started creating it today actually), if there is a simple method or anything that i can use to find the ASCII value of a character in order to use enteredChar so that 'enteredChar' is equal to the ASCII code of the new ciphered character, please help me out...Thanks
P.S. If there's an easier way to go about creating a program for Caesar Ciphers, let me know.

The following code is from my Java textbook Big Java by Cay Horstmann. It is not my code and it's just to guide you in your own cipher.
import java.io.InputStream;
import java.io.OutputStream;
import java.io.IOException;
   This class encrypts files using the Caesar cipher.
   For decryption, use an encryptor whose key is the
   negative of the encryption key.
public class CaesarCipher
      Constructs a cipher object with a given key.
      @param aKey the encryption key
   public CaesarCipher(int aKey)
      key = aKey;
      Encrypts the contents of a stream.
      @param in the input stream
      @param out the output stream
   public void encryptStream(InputStream in, OutputStream out)
         throws IOException
      boolean done = false;
      while (!done)
         int next = in.read();
         if (next == -1) done = true;
         else
            byte b = (byte) next;
            byte c = encrypt(b);
            out.write(c);
      Encrypts a byte.
      @param b the byte to encrypt
      @return the encrypted byte
   public byte encrypt(byte b)
      return (byte) (b + key);
   private int key;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.InputStream;
import java.io.IOException;
import java.io.OutputStream;
import java.util.Scanner;
   This program encrypts a file, using the Caesar cipher.
public class CaesarEncryptor
   public static void main(String[] args)
      Scanner in = new Scanner(System.in);
      try
         System.out.print("Input file: ");
         String inFile = in.next();
         System.out.print("Output file: ");
         String outFile = in.next();
         System.out.print("Encryption key: ");
         int key = in.nextInt();
         InputStream inStream = new FileInputStream(inFile);
         OutputStream outStream = new FileOutputStream(outFile);
         CaesarCipher cipher = new CaesarCipher(key);
         cipher.encryptStream(inStream, outStream);
         inStream.close();
         outStream.close();
      catch (IOException exception)
         System.out.println("Error processing file: " + exception);
}

Help with converting AIR-AP1131AG-E-K9 into Standalone AP

Similar Messages

Maybe you are looking for