Help with Creating 2 Libraries with iTunes

Hi - I'm looking to create and use 2 separate libraries with iTunes on the same computer. Background: I have a large collection now of lossless files (AIFF), both CD rips (16bit/44.1kHz) and higher resolution audio (24bit/96kHz), which are very large files I use for streaming to an audiophile system (via a Logitech Transporter to DAC/processor, etc.). I also have several iPods and an AppleTV I use that have music, applications, video, etc. I want to primarily use what I'll call the "high resolution" library that only needs the music files, but from time to time switch over to a 2nd library I'll call "other" (which would contain smaller compressed music files more suitable for ipod, as well as ipod app's, video content for AppleTV). I would periodically load up the "Other" library to sync up ipods and AppleTV, but the vast majority of the time have the "high res" library open (as the Logitech Squeezecenter music server requires iTunes to be open at the same time with the appropriate library).
So that's the background. Effectively just want to make a copy of the current library (to be "other"), downconvert all the music from the high res versions, make sure I keep all the apps and video, and clean up the original library. Couple questions - when running iTunes on the same computer with 2 different libraries (both can be on my iMac as I have a 1TB drive with adequate space for now), can I delete all the app's, AppleTV link, etc. from the "high res" library once copied? Also, what's the best method for copying the library (i.e., just create a new one and copy everything in with the appropriate preferences checked - "copy files to library"/"keep itunes folder organized"?)
Thanks for any thoughts

don't worry glad to help
this could help you actually http://www.macosxhints.com/article.php?story=20051119134344700
but its very complicated and as i'm no expert in computer code i would wait to try it out before and expert in computer code has a look and see if its oky to use (you have to be VERY careful). By the way it comes from a trustworthy site so i'm sure its fine
just be careful though (look at the comments below
or this http://www.macosxhints.com/article.php?story=20050215130254540
this is different but might help http://www.macupdate.com/info.php/id/7689
Alex

Similar Messages

Need help to create report with jpeg/gif image

Hello,
I need help with creating a form with a special jpeg/gif seal. I never done this Java. Until now, I created all forms with ansi C++ with HP escape characters to draw lines, boxs, and text. This form will contain boxes which is populated with database information read from a text file.
Since this form contains a special seal on the upper right, I don't think it can be done with old fashion ansi C++. How can I create a form with Java and create it as a simple exe to just print the form to a specified printer.
Thanks,
John

Hi,
I am creating a form with boxes (lines and text). What is special about this form is that it has an image jpeg or gif at the top right corner. Is is a state department seal. Up to this form, I had used ansi C++ and print out escape HP character to print out the lines, boxes, and text. I have no idea how to print out the image. I am new to JAVA and only 1 class in it. Is there sample code out there to create this type of form with the image? I need a starting point.
Thanks,
John

I need help with creating PDF with Preview...

Hello
I need help with creating PDF documetns with Preview. Just a few days ago, I was able to create PDF files composed of scanned images (notes) and everything worked perfectly fine. However, today I was having trouble with it. I scanned my notebook and saved 8 images/pages in jpeg format. I did the usual routine with Preview (select all files>print>PDF>save as PDF>then save). Well this worked a few days ago, but when I tried it today, I was able to save it, but the after opening the PDF file that I have saved, only the first page was there. The other pages weren't included. I really don't see anything wrong with what I'm doing. I really need help. Any help would be greatly appreciated.

I can't find it. I went into advanced and then document processing but no batch sequence is there and everything is grayed out.
EDIT: I realized that you cant do batch sequences in standard. Any other ideas?

Problem with creating links with WPC (SP 14)

Hi,
I have a problem creating links with the WPC (SP14): When I want to create internal links (Browse and select the target item) via the right button (choosing a website as a reference link). If I do so I encounter the problems either that the linked site (outside the WPC) shows a blue background and/ or has no navigation frame (on the left side & no breadcrumb-navigation on top).
If I create links with the left button in the WPC via URLs I have the problem with the inserted URL, because sometimes (I don't know why und when) some parts of the code in the URL changes, so that the linked Website is empty (besides the navigation fram - the content isn't displayed anymore). To me it looks like as if the originally website cannot be "found" anymore.
Does anyone has the same problems and is eventually able to help me? This would be really great. Thanks!

Hi,
you have also to deploy the following file from Service Marketplace:
Patch for SP14 for KMC WEB PAGE COMPOSER 7.00
Than it will works. The best way is you deploy WPC SP 15.
If you want i can send you this file via email.
regards,
Sharam
Edited by: Seed mopo on Apr 28, 2008 11:45 AM

Problem with creating links with the WPC (SP14)

Hi,
I have a problem creating links with the WPC (SP14): When I want to create internal links (Browse and select the target item) via the right button (choosing a website as a reference link). If I do so I encounter the problems either that the linked site (outside the WPC) shows a blue background and/ or has no navigation frame (on the left side & no breadcrumb-navigation on top).
If I create links with the left button in the WPC via URLs I have the problem with the inserted URL, because sometimes (I don't know why und when) some parts of the code in the URL changes, so that the linked Website is empty (besides the navigation fram - the content isn't displayed anymore). To me it looks like as if the originally website cannot be "found" anymore.
Does anyone has the same problems and is eventually able to help me? This would be really great. Thanks!

Hi,
you have also to deploy the following file from Service Marketplace:
Patch for SP14 for KMC WEB PAGE COMPOSER 7.00
Than it will works. The best way is you deploy WPC SP 15.
If you want i can send you this file via email.
regards,
Sharam
Edited by: Seed mopo on Apr 28, 2008 11:45 AM

HELP NEEDED CREATING VI WITH POTENTIOMETER

Hi Everyone,
I have a DAQ 6009, linear potentiometer and a spring.
I want to measure the displacement of a spring using the linear pot and correspond this displacement into a force by multiplying by spring constant k. (F=-k.x)
F=force, k = spring constant, x = displacment
I need to create a VI that will,
Take voltage readout of potentimeter and correspond it to 0-110mm displacement of spring. ie 0V=0mm, 5V =110mm.
Multiply the displacement mm by k (which is 25).
Record values into excel file and display when stop button is pressed.
Record peak force (amplitude).
When the pot is fully extented it would correspond to 0mm/0V.
Please find attached current Labview VI and linear pot.
As you can see it is multiplying the voltage reading by 25, I want to correspond this voltage to a displacment and then multiply by 25 so I will have output in Newtons.
Thank you for your help,
John

I am fairly new to Labview, so excuse my lack of knowledge at the moment.
I didn't use a custom scale. Can you inform me of what to do?
I multiplied voltage by 20 to correspond it to mm then by k (25) to convert it to a force, is this correct?
I reversed the ground and 5V supply on the 6009 so it will be reading 0 when pot is fully extended?
Below is DAQ Assistant and Block diagram/front panel.
Also my read from measurement file graph is only generating a somewhat straight line instead of an actual waveform??

Newbie needs help on creating banner with vanishing text.

I have never used Flash before. I may even be barking up the wrong tree. I am trying to create a banner that has text that "appears" and then "disappears". This is the mockup I made for the banner. I would like for the sentences to seem like they are coming out of the couds, and then vanishing. Any help you can offer would be greatly appreciated!
Thanks in advance,
Margaret

Thanks Ned! I did what you said and now have the words animated like I need to. But I am still having one problem. I'm not sure how to get my background to be visible through the entire animation. I can see it in the first frame and then it disappears.
Thanks again,
m

Need help to create file with name and current time stamp.

I need to create .xlsx file exporting data from sql database and file name would be 'FileName' and current yyyymmdd.
I'm trying to use following code but it's keep saying incorrect syntax near "+".
EXEC p_CreateExcel 'sql64', 'NewFile', '\\hrfile1\Shared\Buying Report\NewFile'
+ CAST(YEAR(CURRENT_TIMESTAMP) AS VARCHAR)
+ RIGHT('00'+CAST(MONTH(CURRENT_TIMESTAMP) AS VARCHAR),2)
+ RIGHT('00'+CAST(DAY(CURRENT_TIMESTAMP) AS VARCHAR),2)+'.xlsx'

This is what I have on EXEC p_CreateExcel
USE [XePro01]
GO
/****** Object: StoredProcedure [dbo].[p_CreateExcel] Script Date: 02/26/2015 11:27:35 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER procedure [dbo].[p_CreateExcel]
@db_name varchar(100),
@table_name varchar(100),
@file_name varchar(100)
as
--Generate column names as a recordset
declare @columns varchar(8000), @sql varchar(8000), @data_file varchar(100)
select
@columns=coalesce(@columns+',','')+column_name+' as '+column_name
from
information_schema.columns
where
table_name=@table_name
select @columns=''''''+replace(replace(@columns,' as ',''''' as '),',',',''''')
--Create a dummy file to have actual data
select @data_file=substring(@file_name,1,len(@file_name)-charindex('\',reverse(@file_name)))+'\data_file.xls'
--Generate column names in the passed EXCEL file
set @sql='exec master..xp_cmdshell ''bcp "set fmtonly off select * from (select '+@columns+') as t" queryout "'+@file_name+'" -c -t, -T -S'''
exec(@sql)
--Generate data in the dummy file
set @sql='exec master..xp_cmdshell ''bcp "set fmtonly off select * from XeProgst01.dbo.'+@table_name+'" queryout "'+@data_file+'" -c -t, -T -S'''
exec(@sql)
--Copy dummy file to passed EXCEL file
set @sql= 'exec master..xp_cmdshell ''type '+@data_file+' >> '+@file_name+''''
exec(@sql)
--Delete dummy file
set @sql= 'exec master..xp_cmdshell ''del '+@data_file+''''
exec(@sql)
GO

Help! Create Table with SDO_RELATE query ignores indexes!

Hi, I have a SQL statement like:
select ...
from a, b where sdo_relate(a.loc,b.loc,'querytype=join mask=anyinteract');
When I run this as is, it runs quickly, <10 seconds, and doing an expalin on it shows it is using the spatial indexes.
However if I try:
create table tabl as <select statement>
or
insert into tab1 <select statement>
then it takes over 30 minutes. Examining the trace file shows:
Rows Execution Plan
0 CREATE TABLE STATEMENT GOAL: CHOOSE
0 LOAD AS SELECT
0 NESTED LOOPS
0 TABLE ACCESS (FULL) OF 'AC1'
0 TABLE ACCESS (FULL) OF 'AC2'
I've tried using querytype=WINDOW, I've tried optimizer_mode=RULE and CHOOSE, but nothing forces these create/insert statements to work effectively!
Is this a bug, a documented limitation or is there something I'm missing?
On Oracle 8.1.7, tried on both Linux and Sun Solaris.
Thanks,
Andrew

Andrew,
This is a bug in the optimizer and extensible
indexing for Oracle 8i.
This is fixed in 9i.
Sorry, I don't have a better answer for
this problem.
null

Help needed creating Playlists on iTunes.

When I purchase music on my iPhone through iTunes, I can't figure out how to add the newly downloaded songs to a playlist I've already created. Any ideas on this, or do I have to do via my desktop only?

You can delete all music at once by going to Settings > General > Usage and tapping Music. Swipe across the Music entry and tap the Delet button.
What were the criteria you used to create the playlist on your iPad? That may have something to do with why songs don't show up in the playlist after you download them.

Problem with creating Operation with the BAPI_ROUTING_CREATE

I try to create a routing with operations attached to the default sequence with the BAPI_ROUTING_CREATE, via an external rfc-program.
I have no problems to transfer the Task Header und the MaterialTaskAllocation, but the transfer of the operation allways fails, without an error message. The system creates the Routing without any operation.
Are there some additional fields needed for the tranfer of an operation, in the online documentation there is only
the field OPERATION_ID defined as needed.
Thank's for any help
Jörg Sloksnaitis

I'll share my code snippet since I got this kind of working this morning. The following code with hard-coded values works and is a fairly simple and straightforward Routing. This may be something you can build on.
Task List Header
w_bapi1012_tsk_c-VALID_FROM = sy-datum.
w_bapi1012_tsk_c-VALID_TO_DATE = '99991231'.
w_bapi1012_tsk_c-PLANT = zzplant.
w_bapi1012_tsk_c-LOT_SIZE_FROM = '1'.
w_bapi1012_tsk_c-LOT_SIZE_TO = '99999999'.
w_bapi1012_tsk_c-TASK_MEASURE_UNIT = 'EA'.
w_bapi1012_tsk_c-TASK_LIST_STATUS = '4'.
w_bapi1012_tsk_c-TASK_LIST_USAGE = '1'.
append w_bapi1012_tsk_c to t_bapi1012_tsk_c.
Material Fields
w_bapi1012_MTK_C-material = zzmaterial.
w_bapi1012_mtk_c-plant = zzplant.
w_bapi1012_mtk_c-VALID_FROM = sy-datum.
w_bapi1012_mtk_c-VALID_TO_DATE = '99991231'.
append w_bapi1012_mtk_c to t_bapi1012_mtk_c.
Operation
w_bapi1012_opr_c-ACTIVITY = '9000'.
w_bapi1012_opr_c-CONTROL_KEY = 'RP02'.
w_bapi1012_opr_c-WORK_CNTR = ' '.
w_bapi1012_opr_c-PLANT = zzplant.
w_bapi1012_opr_c-DESCRIPTION = 'Test Operation'.
w_bapi1012_opr_c-BASE_QUANTITY = '1'.
w_bapi1012_opr_c-OPERATION_MEASURE_UNIT = 'EA'.
w_bapi1012_opr_c-VALID_FROM = sy-datum.
w_bapi1012_opr_c-VALID_TO_DATE = '99991231'.
w_bapi1012_opr_c-DENOMINATOR = '1'.
w_bapi1012_opr_c-NOMINATOR = '1'.
append w_bapi1012_opr_c to t_bapi1012_opr_c.
Thanks,
Tim Stadler
Menasha Corporation

Problem with creating view with group by

I created a veiw like this
CREATE OR REPLACE FORCE VIEW "Emp" ("team", "Num") AS
select team, count(*) AS Num
from employee
group by team
The data in the view like this:
team Num
1 29
2 10
5 1
I have team 1, 2, 3, 4, 5 in table employee. I wanta the view to have data like this;
team Num
1 29
2 10
3 0
4 0
5 1
is there some way to achieve this?
Thanks for your help.

SQL> select * from emp;
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7566 JONES      MANAGER         7839 02-APR-81       2975       1000         20
      7902 FORD       ANALYST         7566 03-DEC-81       3000                    20
      7839 KING       PRESIDENT            17-NOV-81       5000                    10
      7698 BLAKE      MANAGER         7839 01-MAY-81       2850                    30
      7782 CLARK      MANAGER         7839 09-JUN-81       2450                    10
      7369 SMITH      CLERK           7902 17-DEC-80        800                    20
      7499 ALLEN      SALESMAN        7698 20-FEB-81       1600        300         30
      7521 WARD       SALESMAN        7698 22-FEB-81       1250        500         30
      7654 MARTIN     SALESMAN        7698 28-SEP-81       1250       1400         30
      7788 SCOTT      ANALYST         7566 09-DEC-82       3000                    20
      7844 TURNER     SALESMAN        7698 08-SEP-81       1500          0         30
      7876 ADAMS      CLERK           7788 12-JAN-83       1100                    20
      7900 JAMES      CLERK           7698 03-DEC-81        950                    30
      7934 MILLER     CLERK           7782 23-JAN-82       1300                    10
14 rows selected.
SQL> select deptno, count(*)
2    from emp
3 group by deptno;
    DEPTNO   COUNT(*)
        10          3
        20          5
        30          6
SQL> can you post the result of this query:
select distinct team from employee;note: just want to check what team values do you have from your table employee

Unable to create table with column default value with date interval

Please help to create table with calculated date defaullt value:
CREATE TABLE emp (
birth_date DATE DEFAULT sysdate + interval '3' day NOT NULL
or
CREATE TABLE emp (
some_date DATE,
birth_date DATE DEFAULT some_date NOT NULL
or
CREATE TABLE emp (
some_date DATE,
birth_date DATE DEFAULT some_date + interval '3' day NOT NULL
below syntax error:
TT1001: Syntax error in SQL statement before or at: "+"

I'm afraid this is not possible; as per the SQL Reference, TimesTen only supports 'constant expressions' for the DEFAULT clause and none of these are constant expressions.
Chris

[Struts]File upload doesnt work with "Create" but works with "CreateInsert"

Hello,
thank you for reading this!
Im facing serious issue with web application built with JSP, Struts & ADF BC in jdeveloper 10.1.3.1 and jdeveloper 10.1.3.2 (same code works perfectly in older jdev versions)
File upload to DB only works if CreateInsert is selected in PageDefinition. (Have to change from default "Create" to "CreateInsert")
If I set "Create" i get this problems:
- if VO is empty the row cannot be created (no error is returned, i click ОК and row is not commited, its just discarded)
- if VO is not empty instead to create new row current row is updated.
This only happens with "multipart/form-data" forms. With plain form row is created without the problem.
If I change to "CreateInsert" then I can add new rows with "multipart/form-data" but i would prefer "Create" because it avoid the blank row issue...
Old 10.1.3 works with "Create" and "multipart/form-data".
Im aware of this problem since the 10.1.3.1 release but I havent posted on the forum because I hoped Oracle is aware of this problem but since the problem remains I decided to react. I do not have the metalink account so only way to address the issue is in this forum.
Please Help.
Sanja

I had some problem with 'Create' earlier with 10.1.2. Then I kept recreateing the pages and then it worked finally. How are you creating the page for 'create' event. Is it like, first displaying the rows from the table with create button, or are you right away creating the page from menu option.

Cannot create sequence with nocache

hi there,
actual I try Raptor build 919 and I have a problem with creating sequences with NOCACHE using the wizzard.
When I want to create a sequence with NOCACHE, the DDL shown in the wizzard is: CREATE SEQUENCE SEQUENCE1 INCREMENT BY 1 START WITH 1 MAXVALUE 10 MINVALUE 1 ;
So the sequence is created with CACHE and cache size 20. After creating it is possible to switch the sequence to NOCACHE.

I just checked in our bug database and this was fixed in our development version 1060 so it will be fixed in our next Early Adopter release (post v919).
-- Sharon

Error when creating connection with SSO Authentication mode

Hi All,
when I am creating the connection with Authentication Mode as SSO, I get error "Unable to connect to SAP BW Server User abc has no RFC Authorization for function group SYST".
When I am craeting connection with specific user id and Password it works fine.
Pls. let me know whats the problem with creating connection with SSO.
System Info: BOXIR.3.1 Sp3, SAP 7.1
Regards,
Nisha

Yes, I have installed Integration Kit, and configured the SSO.
I am able to login into designer with Authentication as SAP.
But, the Problem is with connection creation with SSo authentication mode.
Is there any property or role needs to be defined for the universe designer Group or user, so that SSO is allowed in authentication mode?
Regards,
Nisha

Help with Creating 2 Libraries with iTunes

Similar Messages

Maybe you are looking for