Help with display settings needed urgently

Graphics and icons that are supposed to be round appear oval. For instance the Safari and App icons on the dock appear very oval. Logos on websites I've visited before and I know are round appear oval.
I've tried all display settings and nothing helps. I'm a designer and this is causing a major hinderance. Everything appears condenced / squashed sideways. I'd be very grateful if someone could help with this.
I've just purchased the laptop. I have been using Mac for a few years and I've always selected the "stretched" option from the Display settings which sorted out the problem completely. A circle looked a proper circle. But in this version the option is not available.
Badly hoping someone can help with this.
Thanks.
Version Details - OS X Lion 10.7.4

It sounds like you have selected an incorrect resolution. For starters, are you talking about your Air's display or an external display? You haven't said which Air you have. If you have an 11" model, make sure your display resolution is set to 1366x768. If you have a 13" model, it should be set to 1440x900. These are the proper resolutions for the built in displays. Chosing anything other than the referenced "native" display resolutions will result in distortions or clarity problems.

Similar Messages

I need help with display settings on

When Im watching movies is their any way to change the contrast or anything because it only lets me change brightness

Only brightness can be changed. You could email the developers relations and ask them to make a contrast settings

Help with display quality (LCD TV)

I've hooked up my Mac mini to my Samsung 32" LCD TV via HDMI cable.
The overall quality is just far from desireable and is taking away all of the fun from using this new mac.
I set the resolution output to 720p, which is what the TV supports. So that's good.
I played slightly with the Contrast and Brightness on the TV settings.
But I must be missing something. Although the image is sharp, it's very difficult to read from 6ft away, pictures look terrible (seeing the same picture on a different computer and monitor is so much more revealing), and the display is bad for everything basically.
Please help with any settings suggestions or perhaps a detailed guideline for my setup.
I started to configure a color profile on the display settings but the results weren't that great and I reverted to default. Too many subtle changes. My colorblindness probably doesn't help.
Thanks.

Thanks for the response.
It's the latest Mac Mini with 2.5ghz i5, AMD Radeon HD 6630M, and 8GB RAM.
I am familiar with the "Just Scan" setting under picture size on the Samsung TV.
I'll look for the digital noise reduction.
Are there complete guides with recommended settings for different setups? Or maybe even general, that would help me here?
Thanks.

WRT310N: Help with DMZ/settings (firmware 1.0.09) for wired connection

Hello. I have a WRT310N and have been having a somewhat difficult time with my xbox 360's connection. I have forwarded all the necessary ports (53, 80, 88, 3074) for it to run, and tried changing MTU and what-not.
I don't know if I have DMZ setup incorrectly, or if it's my settings.
Setup as follows:
PCX2200 modem connected via ethernet to WRT310N.
The WRT310N has into ethernet port 1 a WAP54G, and then upstairs (so that my Mother's computer can get a strong signal) I have another WAP54G that I believe receives its signal from the downstairs 54G.
In the back of the WRT310N, I have my computer connected via ethernet port 3, and my Xbox 360 connected via ethernet port 4.
Now, I first figured I just have so many connections tied to the router and that is the reason for being so slow. However, when I unplug all the other ethernet cords and nothing is connected wirelessly, except for my Xbox connected to ethernet port 4, it is still poor. Also, with everything connected (WAP54G and other devices wirelessly) I get on my PC and run a speedtest. For the sake of advice, my speedtests I am running on my PC are (after 5 tests) averagely 8.5 Mbps download, and 1.00 Mbps upload, with a ping of 82ms.
Here is an image of the results:
http://www.speedtest.net][IMG]http://www.speedtest.net/result/721106714.png
Let me add a little more detail of my (192.168.1.1) settings for WRT310N.
For starters, my Father's IT guy at his workplace set up this WRT310N and WAP54G's. So some of these settings may be his doing. I just don't know which.
"Setup" as Auto-configurations DHCP. I've added my Xbox's IP address to the DHCP reservation the IP of 192.168.1.104. This has (from what I've noticed) stayed the same for days.
MTU: Auto, which stays at 1500 when I check under status.
Advanced Routing: NAT routing enabled, Dynamic Routing disabled.
Security: Disabled SPI firewall, UNchecked these: Filter Anonymous Internet Requests, Multicast, and Internet NAT redirection.
VPN passthrough: All 3 options are enabled (IPSec, PPTP, L2TP)
Access Restrictions: None.
Applications and Gaming: Single port forwarding has no entries. Port Range Forwarding I have the ports 53 UDP/TCP, 88 UDP, 3074 UDP/TCP, and 80 TCP forwarded to IP 192.168.1.104 enabled. (192.168.1.104 is the IP for my xbox connected via ethernet wired that is in DHCP reserved list)
Port Range Triggering: It does not allow me to change anything in this page.
DMZ: I have it Enabled. This is where I am a bit confused. It says "Source IP Address" and it has me select either "Any IP address" or to put entries to the XXX.XXX.XXX.XXX to XXX fields. I have selected use any IP address. Then the source IP area, it says "Destination:" I can do either "IP address: 192.168.1.XXX" or "MAC address:" Also, under MAC Address, it says DHCP Client Table and I went there and saw my Xbox under the DHCP client list (It shows up only when the Xbox is on) and selected it.
Under QoS: WMM Enabled, No acknowledgement disabled.
Internet Access Priority: Enabled. Upstream Bandwith I set it to Manual and put 6000 Kbps. I had it set on Auto before, but I changed it. I have no idea what to put there so I just put a higher number.
Then I added for Internet Access Priority a Medium Priority for Ethernet Port 4 (the port my xbox is plugged into).
Administration: Management: Web utility access: I have checked HTTP, unchecked HTTPS.
Web utility access via Wireless: Enabled. Remote Access: Disabled.
UPnp: Enabled.
Allow Users to Configure: Enabled.
Allow users to Disable Internet Access: Enabled.
Under Diagnostics, when I try and Ping test 192.168.1.104 (xbox when on and connected to LIVE), I get:
PING 192.168.1.104 (192.168.1.104): 24 data bytes
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
--- 192.168.1.104 data statistics ---
5 Packets transmitted, 0 Packets received, 100% Packet loss
Also, when I do Traceroute Test for my Xbox's IP, I just keep getting:
traceroute to 192.168.1.104 (192.168.1.104), 30 hops max, 40 byte packets
1 * * * 192.168.1.1 Request timed out.
2 * * * 192.168.1.1 Request timed out.
As for the Wireless Settings, it is all on the default settings with Wi-Fi Protected setup Enabled.
To add, I have tried connecting my modem directly to the Xbox and my connection is much improved. I have no difficulty getting the NAT open, for it seems my settings are working for that. Any help with these settings would be VERY much appreciated.
Message Edited by CroftBond on 02-18-2010 01:09 PM

I own 2 of these routers (one is a spare) with the latest firmware and I have been having trouble with them for over a year. In my case the connection speed goes to a crawl and the only way to get it back is to disable the SPI firewall. Rebooting helps for a few minutes, but the problem returns. All of the other fixes recommended on these forums did not help. I found out the hard way that disabling the SPI Firewall also closes all open ports ignoring your port forwarding settings. If you have SPI Firewall disabled, you will never be able to ping your IP from an external address. Turn your SPI Firewall back on and test your Ping.
John

Need help with export settings...Please

I am brand new to the camera I have but been using FCP for 6 years. The camera is a Panasonic HMC150 that records in the AVCHD codec. I have an Intel Imac 20 2.4 Ghz 4 gigs of ram. My audio/video settings for the sequence in FCP are as follows:
Sequence pre set: Apple pro Res 422 1920-1080 60i 48khz (footage is 1080 60i)
I Log and Transfer with no problem, edit no problem.
My question is when I go to export the finished sequence to Idvd or DSP, what settings do I use?
I have exported to quicktime movie file with "current settings" and I have had NO luck in compleely burning a DVD. Is this the correct setting? what is everyone else using? Any help would be greatly appreciated!

DVD is standard definition. You have to compress your HD material to SD first. Crack open the manual for Compressor or DVDSP and you'll get loads of valuable info. The first 30 or so pages of the DVDSP manual are quite informative, and easy to read.

I need help with export settings of FCP project edited HDV 16:9

Hello All,
I have searched the forum only to become more confused. I shot and edited my first HD project and am ready to burn it. What are the settings needed by DVDSP for my FCP export?
FCP 6.0.5
OSX 10.5.6
1080i

Export to 16:9 SD m2v.
Usually I use self contained with an uncompressed Codec then bring that into Compressor to use Virtual Clusters. Start with a Compressor preset that is 16:9 SD that fits the footage (in other words if the video is 67 minutes, start with the 90 Minutes) and adjust frame filters to resize "better"
Some more general info on encoding to make things fit and issues to keep in mind
http://dvdstepbystep.com/faqs_7.php
http://dvdstepbystep.com/faqs_3.php
Take a look at these threads, so more details and options
http://discussions.apple.com/thread.jspa?messageID=8715713&#8715713
http://discussions.apple.com/thread.jspa?messageID=9070936&#9070936
And the others on the subject. Type in "HD SD" and you will see many different disucssions

Help with sequence settings in final cut for project with 2 different frame rates.

I really need help with this one! I finished editing a wedding video and realized after exporting that it was filmed in two different frame rates. This has happened before but I converted the footage to match and fixed the problem. In this case, the footage is part 30fps and part 60fps. The majority of it was filmed in 30fps. I cannot convert the 60 to 30 without the slow motion effect which I do not need so I have to find a way to burn this to a DVD without it looking messed up! The video was shot with two Canon 7ds if that helps anything. The first sequence I set at 29.97 and exported as a quicktime movie and all the footage filmed in 60 looked perfect and the footage in 30 looked jittery. Then I tried the sequence at 59.97 and it switched. The footage filmed at 30 looked good and the 60 was cropped in. I am so confused! Any advice or suggestions would be greatly appreciated!!

Thanks for your help Michael! The frame rates are 29.97 1920 x 1080 and 59.94 1280 x 720. I did a control click on the clips in final cut and viewed the item properties/format to find this info. The Canon 7d is a DSLR but we use it for video. As for my workflow, the first thing I do is import the footage onto my computer and then drag the clips into mpeg streamclip. I choose apple prores 422 and uncheck the interlaced box. Once this is done I import the .mov files into final cut. The sequence automatically sets itself to whatever clip I drag in first so it originally set as 29.97. When I finished editing wedding video, I export it to a quicktime movie and choose whatever settings match the sequence, in this case apple prores 422 1920 x 1080 30p. Once that is done I use iDVD to burn the discs.
I knew something was wrong when I watched the quicktime movie and all the 30fps footage was jittery and most of the cross dissolves looked strange. That's when I figured out the footage was at two different frame rates. What I don't understand is why whatever the sequence is set at in final cut, the clips of the opposite frame rate look right but the clips set at the matching frame rate don't???

Help with display of numbers

First of all I have to say the tutorials on this site are extremely helpful. My instructor wants all our java code written as Object Oriented and when I did a search on here for Object Oriented it totally helped out. Now I just need help with the display of numbers, my code works perfectly fine except that the number has wayyyyyyyyyyy to many decimal points after it. I only wanted two.
public class Mortgage
     double mtgAmount;
     double mtgTerm;
     double mtgRate;
     double monthPymt;
          public void Amount(double newValue)
               mtgAmount = newValue;
          public double Amount()
               return mtgAmount;
          public void Term(double newValue)
               mtgTerm = newValue;
          public double Term()
               return mtgTerm;
          public void Rate(double newValue)
               mtgRate = newValue;
          public double Rate()
               return mtgRate;
          public void calcmonthPymt(double newValue)                            //(LoanAmt * Rate) / (1- Math.pow(1+Rate,-Term));
               monthPymt = (newValue);
          public void display()
          System.out.println ("The Mortgage Amount is:" +(Amount( ) * Rate( )) / (1- Math.pow(1+Rate( ),-Term( ))));
     public static void main (String[] args)
               Mortgage Mortgage1=new Mortgage();
               Mortgage1.Amount(200000);
               Mortgage1.Term(360);
               Mortgage1.Rate(.0575);
               Mortgage1.display();
}

I figured it out, the math is wrong I think but I got everything to display correctly
import java.io.*;
import java.text.*;
import java.text.DecimalFormat;
public class Mortgage
     double mtgAmount;
     double mtgTerm;
     double mtgRate;
     double monthPymt;
     DecimalFormat money = new DecimalFormat("$0.00");
          public void Amount(double newValue)
               mtgAmount = newValue;
          public double Amount()
               return mtgAmount;
          public void Term(double newValue)
               mtgTerm = newValue;
          public double Term()
               return mtgTerm;
          public void Rate(double newValue)
               mtgRate = newValue;
          public double Rate()
               return mtgRate;
          public void calcmonthPymt(double newValue)                            //(LoanAmt * Rate) / (1- Math.pow(1+Rate,-Term));
               monthPymt = (newValue);
          public void display()
          monthPymt = (Amount( ) * Rate( )) / (1- Math.pow(1+Rate( ),-Term( )));
          System.out.printf("The payment amount is:$%.2f", monthPymt);
          System.out.println();
     public static void main (String[] args)
               Mortgage Mortgage1=new Mortgage();
               Mortgage1.Amount(200000);
               Mortgage1.Term(360);
               Mortgage1.Rate(.0575);
               Mortgage1.display();
}

Help with PAL settings for Sequence

Hi –
I’m having some issues with a PAL project and need some help with the right sequence settings. I have 3 camera angles that are all PAL that I am trying to edit together in a multi-clip sequence and everytime I add anything to the timeline I am getting the red render bar. I've tried all different PAL settings but nothing is working. Here are the specs of the DV clips:
Frame Size : 720 X 576
Vid Rate – 25 FPS
Compressor DV-PAL
Data Rate – 6.9mb/sec
Pixel Aspect – PAL – CCIR-601
Audio 48Khz
Aud Format – 32bit – Floating Point.

From the menu bar: Final Cut Pro > Easy Setup. What setting is selected there?
From the menu bar: Sequence > Settings. What setting is selected there?
In both cases they should be set to DV PAL.

Help with Internet Settings for Blackberry Curve 8520 On Orange Pay-Monthly

I need help with my internet settings I'm currently on Orange Pay-Monthly and have recently bought a second hand Blackberry Curve 8520 which is unlocked but used to be on 02! I don't have a clue on what to do or where to start all I know is in the top right hand corner where the signal bar is it says GPRS and WIFI ! I don't want WIFI as I don't have a wireless connection and would like to get the settings for my curve so I can browse the internet and go on Facebook etc and BBM!! I've clicked on the internet logo in the menu bar but it just say's hotspot browser.. but wont let me browse!! Some one please help me !!

Hey BaByPaW1990,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
You can get your APN settings from your network service provider, also make sure you have a BlackBerry data plan.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Help with FMLE Settings for Sports Broadcast

Hello,
I am in need of some help tweaking my settings in FMLE. I put on various sports broadcasts, but one of my clients has limited bandwidth (avg ~2.5-3mbps upload).
I'd like to keep the output pixel size at 640x360 so that it takes up our entire player and doesn't letter box it, but with the larger video size I sometimes run in to either buffering,or pixelated video depending on how the bandwidth is that particular day. I'd like to stream between 800k-1000k.
I am using VP6 codec and using an Osprey Card as my capture device.
Some of my questions are:
1) Should I capture my video bigger than 640x360 and have FMLE shrink it, or capture it at the same size I want to output it at?
2) In the Format advanced encoder settings, What should I set as my keyframe, quality, and datarate window. Ideally I would like to use keyframes every 1-2 seconds because I work with fast-paced video, but I know that sends a lot of extra data. Same with Datarate Window. Can someone help explain the significance of this one.
3)Under the output panel, I am not currently using the auto adjust function. Should I enable this when my bandwidth takes a hit? If so, which is preferable, dropping frames or degrading quality? Any explanation wuold be very helpful.
4)Should I deinterlace my video? We have a 3-camera shoot using Canon XL2's and a DataVideo Switcher. Everything is analog SD.
I am able to drop by bitrate down to 600K and the stream does not buffer, but it starts to get pixelated. I would think that 3mbps upload bandwidth is enough to stream at 800k. Any help adjusting my settings to shapen the imagine would be greatly appreciated.
Thanks.

1) Should I capture my video bigger than 640x360 and have FMLE shrink it, or capture it at the same size I want to output it at?
--> Always capture at the same size, unless the device/card doesn't support that size.
2) In the Format advanced encoder settings, What should I set as my keyframe, quality, and datarate window. Ideally I would like to use keyframes every 1-2 seconds because I work with fast-paced video, but I know that sends a lot of extra data. Same with Datarate Window. Can someone help explain the significance of this one.
--> Data rate window is useful for unexpected source data that might not encode well within the specified bit-rates. For example, if you set data rate window to "tiny" and a complex frame (source data) arrives, then encoder will not allocate some extra bits to encode that frame in good quality. But if you set the window to huge, then that complex frame will be encoded in good quality by allocating more bits to it. So, basically, the "delta" around the specified bit-rate increases on moving from "tiny" to "huge" data rate window. Your output bit-rate will vary more in case of "huge" setting.
3)Under the output panel, I am not currently using the auto adjust function. Should I enable this when my bandwidth takes a hit? If so, which is preferable, dropping frames or degrading quality? Any explanation wuold be very helpful.
--> I can explain the difference between the 2 options and you can experiment with both and stick to one, which gives a better user experience under your bandwidth conditions.
a. Once the auto-adjust feature triggers, Drop frames option will intelligently drop some frames. As a result of this, you might observe video stalling depending upon the severity of the bandwidth conditions.
b. Once the auto-adjust feature triggers, Degrade quality option with a min. video bit-rate value of say 500 kbps will try to encode all the frames within this 500 kbps limit. As you are reducing the bit-rate from the original value of say 800 kbps, the quality is bound to degrade. If you check the "preserve per frame quality" option then the encoder will encode >=50% of the frames within the specified bit-rate of 500 kbps. As the no. of frames are less the per frame quality will be better than the previous case. There is a possiblity that even after degrading quality, the buffer is exceeding the given limit then the degrade quality option will automatically switch to the drop frames option.
4)Should I deinterlace my video? We have a 3-camera shoot using Canon XL2's and a DataVideo Switcher. Everything is analog SD.
--> Deinterlace option is only available for video sizes >= 640x480.

Help with displaying image received from socket on Canvas

Dear programmers
I know that I'm pestering you lot for a lot of help but I just got one tiny problem which I just can't get over.
I'm developing a remote desktop application which uses an applet as it's client and I need help in displaying the image.
When a connection is made to the server, it continuously takes screenshots, converts them to jpg and then send them to the client applet via socket communication. I've got the the server doing this in a for(;;) loop and I've tested the communication and all seems to be working fine. However the applet is causing some issues such as displaying "loading applet" until I stop the server and then the 1st screenshot is displayed. Is there a way to modify the following code so that it displays the current image onto a canvas while the next image is being downloaded and then replace the original image with the one which has just been downloaded. All this needs to be done with as little flicker as possible.
for(;;)
    filename = dis.readUTF();
    fileSize = dis.readInt();
    fileInBuffer = new byte[fileSize];
    dis.readFully(fileInBuffer, 0, fileSize-1);
    //Create an image from the byte array
    img = Toolkit.getDefaultToolkit().createImage(fileInBuffer);
    //Create a MyCanvas object and add the canvas to the applet
    canvas = new IRDPCanvas(img, this);
    canvas.addMouseListener(this);
    canvas.addKeyListener(this);
    add(canvas);
}

Anyone?

Help with display glith using JList

Hi, first post so bit of background - I'm teaching Java at the moment, am fine with command line but am dabbling more with Swing, despite certain glitches I always get ( e.g. the 7-segment display last year) but anyway....
I've been trying to develop a little app that picks random boxers for a computer game. My current problem is that i am trying to add custom boxers and then update the JList and repaint the frame. When I add a boxer i can see it adding to the list, however it is unreadable and displayed too small.
Forgive any bad coding etiquettes - its very much a work in progress from a relatively poor programmer ;)
theBoxers is a JPanel containing the JLists, aWindow is the JFrame, customButton is a button to add a custom fighter - this gets a name from a field, and a weight from a combo box, adds it to an array and then attempts to add it to an array, then re-generate the lists
customButton.addActionListener(new ActionListener()
            public void actionPerformed(ActionEvent e)
                    addCustom(customCombo.getSelectedIndex(),addCustomName.getText());
                         System.out.println(customCombo.getSelectedIndex() + addCustomName.getText());
                         theBoxers.repaint();
                         aWindow.repaint();
public void addCustom(int theWeight, String theName)
          switch(theWeight)
               case 0:          featherCustoms[featherCustomsSize]=theName;
                              featherFighters = new JList(featherCustoms);
                              featherCustomsSize++;
                              break;
               case 1:          lightCustoms[lightCustomsSize]=theName;
                              lightFighters = new JList(lightCustoms);
                              lightCustomsSize++;
                              break;
               case 2:          welterCustoms[welterCustomsSize]=theName;
                              welterFighters = new JList(welterCustoms);
                              welterCustomsSize++;
                              break;
               case 3:          middleCustoms[middleCustomsSize]=theName;
                              middleFighters = new JList(middleCustoms);
                              middleCustomsSize++;
                              break;
               case 4:          lightHeavyCustoms[lightHeavyCustomsSize]=theName;
                              lightHeavyFighters = new JList(lightHeavyCustoms);
                              lightHeavyCustomsSize++;
                              break;
               case 5:          heavyCustoms[featherCustomsSize]=theName;
                              heavyFighters = new JList(heavyCustoms);
                              heavyCustomsSize++;
                              break;
               default:     System.out.println("Not Added");
                              break;
     }

Awww, its nice that DB has someone to comeback and carry on a discussion.....long after its over.
The problem here seems to be your lack of understanding between what a teacher or what an 'instructor' is.
From the way you speak, an instructor appears to be someone who is technically skilled in both coding and teaching Java as a programming language, designed for people who wish to code in Java.
A Teacher is someone who must deliver a wide range of subject knowledge to a wide range of abilities, including those who were unable to pass High-School exams. They are responsible for pitching the subject at the correct level for the student, whilst also teaching towards passing the exam, and ultimately gaining a qualification.
The computing course i am currently teaching does not require OOP, but as Java is the language i was taught at University, and is still often used in our University's, I chose it. I don't pretend to be the best programmer in the world. But I do know that I am teaching the pupils the correct basics, at a higher level than is probably required, to give them the right approach at university. also, this is whilst teaching a large amount of theory.
Whether you agree, or disagree, matters not to me as I think you would be unfamilier with the specification I am currently teaching to, or what area's of study need to be taught. The exam board appears happy, as do past students who are now well into their university course, as did my marker when i achieved my degree.
The code posted in the OP (as stated earlier) had nothing to do with displaying my coding abilities, nor did it display the technique's I use when teaching students. It was a small sample of a program which included a JList which was not displaying properly. I tried to include the whole code but it was too big, therefore it was cut down.
It was a work in progress which i now have working. So now i can look at it again in terms of programming structure. It appears I have made a mistake asking for assistance on here, as instead I got a lecture, with very little insight on your part as to my situation or the nature of the problem/solution.
At the end of the day, each to his/her own opinion. What I will say is that when someone requests help, positive feedback/criticism is well recieved along with instructions/guidance on how the problem can be solved. I feel that I received none of this on here, but this is what I will always provide to the students I teach.
Not everyone is a full-time Java programmer or has the time to hit the highest expectations.

Trouble with display settings for projector/Reactable

Hi,
I'm trying to install a musical hardware interface called the Reactable for use with my iMac, and I'm having trouble getting the correct display settings. It's designed to work with laptops and it works fine for the most part with my Apple Hackintosh, but I can't seem to get it working correctly with my iMac. The tech support from the Reactable company recommends that I use 1600x1200 resolution or 1024x768 (native) on the projector, but when I open my display settings I am not presented with either of those options. It only permits me to use 1024x768 and 1024x768 (stretched).
The only instance in which I can get the projection to cover the whole table is with 1024x768, but then the projection is too large. Do I need to change the scaling somehow? How do I do that?
Thanks,
Justin

1080p. If you have a Mac Mini with an HDMI connector, connect direct through there.
Otherwise you'll need to look at either: Which Macs don't have audio over mini-Displayport connectivity, need either an
Apogee DVI To HDMI Converter / SPDIF Optical Toslink+Coaxial Input Output if you have a mini-DVI or DVI (The left connector is DVI, and the right connector is mini-DVI) connector and it is Intel.
Kanex iAdapt Displayport adaptor if you have a mini-Displayport ( http://upload.wikimedia.org/wikipedia/commons/thumb/4/47/Mini_DisplayPort_on_App le_MacBook.jpg/300px-Mini_DisplayPort_on_Apple_MacBook.jpg
) connector.
Note, thunderbolt connectors look the same as mini-Displayport except they have the lightning icon symbol.
PowerPC Mac Minis, need a StarTech DVI2HDMIA connector together with an RCA minijack to red and white splitter cable.

Help with movie settings

I thank you in advance for your help with this!
My website address I have a question about is
www.holyredeemernorthbend.org
and I have a question about the movie section.
I am using iWeb to build my church's website. All is well except the movie page. I have only one movie uploaded so far, my old site had 6, each between 6 and 10 megs. On the old site I used microsoft Frontpage. The videos, all in WMV format, worked flawlessly. They used to download in Windows media player, and played immediately, but now that I am using iWeb they have to download before watching, AND if it is a Mac owner visiting the site they have to have flip4mac installed as a Quicktime plugin. PC users can't see them at all.
It's not a problem for me to export the videos in another format, I would just like some help with the most universally excepted settings. I don't care if it's Quicktime, Flash, or Windows Media. What would be best for most internet users? And, can you put a movie on an iWeb made site, that will load into Windows Media Player as an option to quicktime? That is to say if I were to give the viewer a choice.

iWeb writes page code that forces the QuickTime browser plug-in be used. Since your file is:
http://www.holyredeemernorthbend.org/HRWeb/Media/Father%20Kies.wmv in Windows Media Player format Mac visitors must have Flip for Mac (I don't use it) and PC users can't use QuickTime to view WMP files.
You can use iWeb to make a "direct" link (link to file). When the viewer click the link they would be able to download the WMP file. This would allow PC visitors to use Media Player and Mac visitors use Flip for Mac or Windows Media Player for Mac.
Since iWeb forces QuickTime formats you should convert from .wmv to .mov formats to make your work easier.

Help with display settings needed urgently

Similar Messages

Maybe you are looking for