Help with domain migration of a HyperV ( csv ) CLUSTER on Windows 2008R2

Hello everyone ,
In our environment we have 3 physical machines running Windows 2008 R2, under the " domain.local ";
Server1 -> Primary Domain Controller
Server2 -> Node 1 of cluster Hyper V
Server 3 -> Node 2 Cluster Hyper V
Server 2 and Server 3 share CSV storage mode , and contain multiple virtual machines
We need to migrate all machines to a new domain , but I'm very lost on how to do and not lose the cluster. Can anyone help me and tell me please the steps to migrate this environment from the old domain to the new domain ?
do i have mount a parallel cluster in the new domain and then, migrate one by one all the virtual machines?
Thank you very much , any help is welcome

Hi Sir,
If you have only 3 physical machines and can not re-build the hyper-v cluster into new domain, I would suggest you to maintain two domain one for hyper-v cluster one for the new domain (as for new domain , you can create a VM in hyper-v cluster and
promote it to be a new DC ).
If you have more physical machines you can try to create a new domain and cluster then move these VMs into the new cluster to achieve migration .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Similar Messages

Can anyone help with the installation of adobe creative suite 4 on windows 7

can anyone help with the installation of adobe creative suite 4 on windows 7

You're not going to get any help without providing FULL DETAILS about the problem and your system.
Bob

Help with data migration- Balances from legacy system for Loans Management

Hi all,
Can someone please help with this. I need help in how to go about migrating legacy data and balances for loans to SAP FS-CML.
Which flow types to use, and to do the migration.
Thanks.
Fisayo.

Hi Fisayo,
good documentation you can find in the transaction KCLJ
=> Help => Application help.
You also can find some documentation in the IMG:
=> Loans Management
=> Tools
    => External Data Transfer
      => Transfer Categories
         => Loans Master Data and Conditions
         => Loans Flow Data
You could use transaction KCLJ to upload the existing flows. For this you need a sender file with the flows you want to upload. This file you can create manually or by a report in the old/legacy system that writes the file in your file system.
The sender structure must be defined in transaction KCLL and you could use transaction KCLT to create or change a file to test the upload program.
You will also find some information in the online documentation.
Please be aware that the upload of flows must be tested very exactly. Iif you take over 'wrong' flows, this could cause serious problems in the future when you work with the contracts.
Best regards,
Tomislav

I need help with a migration from Exchange 2010 to 2007

Hi All,
I need help migrating mailboxes from a separate forest / domain using exchange 2010 to our Exchange 2007 SP3 servers.. I am following this procedure:
1. On source server, create a mailbox user, test01.
2. On target server, run the following command to move the AD account:
Prepare-MoveRequest.Ps1 -Identity [email protected] -RemoteForestDomainController FQDN.source.com -RemoteForestCredential $Remote -LocalForestDomainController FQDN.target.com -LocalForestCredential $Local -UseLocalObject -Verbose"
3. Run the ADMT to migrate the password and SID history.
4. Run the following command to move the mailbox:
New-MoveRequest -Identity '[email protected]' -RemoteLegacy -RemoteTargetDatabase DB03 -RemoteGlobalCatalog 'GC01.humongousinsurance.com' -RemoteCredential $Cred -TargetDeliveryDomain 'mail.contoso.com'
(Changed all the details obviously)
It gets to 95% and shows this error
01/12/2014 12:47:24 [EX2K10] Fatal error UpdateMovedMailboxPermanentException has occurred.
Error details: An error occurred while updating a user object after the move operation. --> Active Directory operation failed on DC.DC.COM . This error is not retriable. Additional information: The parameter is incorrect.
Active directory response: 00000057: LdapErr: DSID-0C090A85, comment: Error in attribute conversion operation, data 0, vece --> The requested attribute does not exist.
at Microsoft.Exchange.MailboxReplicationService.LocalMailbox.Microsoft.Exchange.MailboxReplicationService.IMailbox.UpdateMovedMailbox(UpdateMovedMailboxOperation op, ADUser remoteRecipientData, String domainController, ReportEntry[]& entries,
Guid newDatabaseGuid, Guid newArchiveDatabaseGuid, String archiveDomain, ArchiveStatusFlags archiveStatus)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.<>c__DisplayClass3c.<Microsoft.Exchange.MailboxReplicationService.IMailbox.UpdateMovedMailbox>b__3b()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.Microsoft.Exchange.MailboxReplicationService.IMailbox.UpdateMovedMailbox(UpdateMovedMailboxOperation op, ADUser remoteRecipientData, String domainController, ReportEntry[]& entries,
Guid newDatabaseGuid, Guid newArchiveDatabaseGuid, String archiveDomain, ArchiveStatusFlags archiveStatus)
at Microsoft.Exchange.MailboxReplicationService.RemoteMoveJob.UpdateMovedMailbox()
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.UpdateAD(Object[] wiParams)
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: IMailbox.UpdateMovedMailbox
OperationSide: Target
Primary (b5373e49-6a06-41f4-990e-27807c7a57f3)
01/12/2014 12:47:24 [EX2K10] Relinquishing job.
Any ideas what i can do about this?

Hi,
From your description, I recommend you follow the steps below for troubleshooting:
Open the problematic user in AD and check the Email Address. Verify if you can open or edit the x400 address. If no, remove the x400 address and recreate it. If yes, ensure that the name is spelt correctly. After that, continue to move the mailbox and check
the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Need help with database migration using export/import

Hi,
I am planning to do a database migration from 8.0.6 to 10.2.0.4. I am using export/import. Please answer some of my queries:
1) Do i need to do full export using SYS/SYSTEM user.
exp80 system/manager file=c:full.dmp log=c:\full.txt full=y consistent=y
2) Will there be any data corruption while export.
3) Is export/import the only method of migration/upgradation.
Please help
Thanks.

I'll answer the specifics that I know about your questions, but please look at the post from Srini for additional info:
1) Do i need to do full export using SYS/SYSTEM user.
exp80 system/manager file=c:full.dmp log=c:\full.txt full=y consistent=yA full export will move as much information (metadata/data) as possible. In order to do a full export/import, you need to do this from a
privileged account. A privileged account is one with EXP_FULL_DATABASE for export and IMP_FULL_DATABASE for import.
2) Will there be any data corruption while export.The data in the objects that you are exporting is being read, nothing is written to user data. I'm not sure what this is available in 8.0.6,
but if you need a consistent export, look to see if consistent=y is available in 8.0.6. All this means is that the dump file created will have
consistent data in it.
3) Is export/import the only method of migration/upgradation.If you are changing hardware, the only supported way from 8.0 to 10.2.0.4, that I know of, is using exp/imp.
Hope this helps.
Dean

Need help with Domain Registration and Hosting

Hi Folks,
I have a few questions which I hope some of you may be able to help me with.
1) I would like to register a domain name, which registrars might some of you suggest, as a mac user? Nice interface, easy to use, not pushy sign up process, etc.
2) I would also like to sign up for hosting with my new domain name, so that I can have an FTP site, CalDav support, IMAP e-mail with my domain name, and a very nice webmail app. I have been looking around and found a lot, but none that are nice to use, they all look like windows 95ish, etc.
I will be hosting the actual website on my .mac space, but running the FTP through the hosting site, and would like to run the IMAP e-mail via the host as well. That's about it, I'm sure some more questions will follow soon, but I do want to register my domain ASAP, but at the same time find a host, because I know sometimes the registration is free when you sign up with a host, so would prefer not to spend double for something, sort of.
Thanks for all you help!

Check out GoDaddy. There cheap and offer the services you want. http://GoDaddy.com there website probably isn't the easiest to use, but their prices sorta compromise for it. If your looking for a more upscale provider then check out http://www.machost.com/ and http://macosxhosting.com/

Help with iPhoto migration/upgrade to Aperture, after HDD replacement and clean install.

I'm getting ready to replace the internal HDD in my iMac, and perform a clean install.
I'm currently running:
OS X Lion, version 10.7.5
iPhoto '09, version 8.1.2
After the clean install:
The latest version of OS X Mavericks
Installing a fresh version of Aperture, and *hopefully* importing all of my photos from my old iPhoto, into new Aperture (193 GB worth of photos).
What's the best (specifically: SAFEST) way to go about making sure my photos successfully import from my old HDD, and old version of iPhoto, into a new version of Aperture on what will basically be a brand new computer? Is this just a matter of dragging and dropping the "iPhoto Library" to an external USB drive, then somehow bringing that folder into Aperture after my machine is up and running with it's new hardware and software?
Thanks in advance for your help!

From what I understand, iLife 11 comes bundled with 10.9
No -- no version of iLfe or of iPhoto comes bundled with any OS
if I simply drag and drop my existing iPhoto library to an external drive right now (despite being a library from an old version of iPhoto), I'll be able to simply import that library into the bundled version of iPhoto 11 that'll come with my clean install of 10.9, without any corruption of image library, loss of metadata, etc...?
Sort of
1 - the EHD must be formatted Mac OS extended (journaled)
2 - there is no iLife '11 bundled with Mavericks (or any other OS) - you must pruchase iPhoto '11 in the App store
3 - there is no importing of anything involved - you simply drag your iPhtoo library to the pictures folder of the new system and launch iPhoto letting it upgrade the library
No corruption, lss of data or other problems - unless somethng goes wrong - which is why you need a backup before doing this - your copy on the EHD is fine - just do not open it directly - make sure you are opening a copy
LN

Help with photo migration / conversion

Greetings smart Mac folks.
I just bought a new mac book to replace an old G3. I used the migration assistant to move into the new machine. IPhoto wants to convert the old Tiger pics to Leopard iPhoto 08 pics.
It hangs with various numbers of pics yet to be processed. It hangs for ever with both processors showing maxed out in the activity monitor floating bar. It's done this repeatedly.
Anybody have an idea what's going on, or how to get it to finish it's job?
I've done it with only iPhoto running, after restarts and permissions repairs.
Thanks for thinking.

Assuming that you still have your old iPhoto library on your G3 (and that it is working well there - if not copy it and rebuild it there first) trash the iPhoto library on your MB and drag the iPhoto library from the G3 to the pictures folder on the MB and launch iPhoto - hopefully that will work better than migration assistant did
LN

Help with s-l-o-w-w-w-w-w Windows file sharing

After much hair-pulling, I finally got windows file sharing working on our 10.4.4 xserve (opening up ports 137-139 helped a lot!) - however I have noticed that directory navigation from the PC's are extremely slow... it takes about 25-30 seconds to navigate from one dir to another... once you navigate into a dir, and then back out, it seems that the next attempt into that same dir is very fast.
Any tips are appreciated.
Windows PC's are running XP Pro SP2.

There are several threads about improving Windows performance over smb. Do a search for "smb slow" to find them.
The single biggest thing you can do if you're dealing with a lot of little files is to do: sudo sysctl -w net.inet.tcp.delayed_ack=0
To add this permanently to your server add 'net.inet.tcp.delayed_ack=0' to /etc/sysctl.conf
There a bunch of other edits discussed here:
http://www.macosxhints.com/article.php?story=20040201121437157
=Tod

Need help with Imovie before I throw my computer out the window!

Ok so I got a canon fs200 for christmas and supposidly it works great with imovie. Now when I first hooked it up it kept crashing saying "IMovie quit unexpectedly while using the Sonix SN9C201 Webcam Plugin." I do not understand why its trying to use that plugin but anyways. So I messed with it some more and thought I figured out the problem and that it was plugged into my mini stack instead of directly into the computer. So when I tried that it loaded up great and worked, now today when trying to bring in videos from the camera it has gone back to crashing with same error! This makes NO sense...it is plugged directly into the computer it comes up as its own drive on my desktop yet crashes everytime I try to bring video in. Please help me with what I can do!

Wow..I feel like a idiot..I had my webcam plugged in and totally forgot about it b/c I never use it. Unplugged that and bammo works like a charm. Thanks for makin me realize it hah

Help with 10.4.5 VPN connection using PPTP to Windows 2003 Server

Hi,
I've looked on the discussions for an answer to this but have had no luck so far, can anyone help?
I'm trying to connect my 10.4.5 PB to my Wn2k3 server (with RRAS) using PPTP VPN, however I keep getting stuck at the Negotiating phase of the connection and finally get this error in OSX Internet Connect:
Could not negotiate a connection with the remote PPP server. Please verify your settings and try again.
I can connect from my Win XP laptop so no issues with the router etc, do I need to make any changes to the server config?
Thanks,
Sahajesh.
12" PB (G4) Mac OS X (10.4.5)

Resolved elsewhere.

Help with Access connecting to a Oracle DB on a Windows 7-64bit workstation

Hello:
Here's my configuration:
OS: Windows 7-64bit
Oracle DBMS: 11g
I am trying to connect to a 11g DB from within Access.
I launched the ODBC Administrator from c:\windows\syswow64 directory as an Administrator (which I undertstand is the 32-bit version). When I tried to set up a new DSN, I encountered two problems:
1. The TNS Service Name dropdown has a slew of entries with funny characters. However, it did not include my TNS Entry.
2. I manually entered my TNSName. It did ask me for the username and password. When I tested the connection, I got an error "ORA-12154"
Any help to resolve the issue will be much appreciated.
Venki

Senthil:
What should it point to?
Anyway, I re-installed both the 64-bit Oracle DB and the 32-bit client. There are two sets of TNSNames.Ora, Listener.Ora and SQLNet.ora, one for the 64-bit and one for the 32-bit in their respective folders.
I have no problem creating an ODBC DSN for the 64-bit version. The link connects fine to the DB
I have two TNS Listeners defined, one for the 64-bit and one for the 32-bit. While the 64-bit uses Port 1521, I am using Port 1522 for the 32-bit; I also made sure that Listener.ora refers to the same port. But when I use Oracle Net Configuration Assistant to configure Local Net Service Name Configuration to test the Service, it says "TNS:listener does not currently know of the service requested in connect descriptor.
I did check that both the TNS Listener services are running.
venki

Help with a Blind Configuration of a G5 Cluster node

So I bought 2 G5 Cluster Nodes to dedicate some audiovisual processes to them. My only other mac computer is a Core 2 Duo Macbook Pro.
Using Pacifist, I was able to do a clean install of Mac OSX onto the internal drive by putting it into an external enclosure.
Now here is my problem: The cluster nodes have no videocard.
I plan on using them through the OSX Screen Sharing function, when they will be conencted to the network, but I don't know how to do the initial configuration of Mac OS X on them, since I can not boot from a system using the Apple Partition Map on my Macbook pro, and the Cluster node will not boot from the GIUD partition scheme.
Can anyone please help me?
Thanks,
Chuck

Assuming you're running Mac OS X Server on the cluster node, just boot the server normally - it will run a special first-time-boot process that sets up a network listener.
You can then install the Server Admin tools on your MacBook Pro and run Server Assistant. Server Assistant will look out over the network and find the new servers, then give you the opportunity to configure them remotely (assign account data, IP address, etc.).
(note you can also do this as part of the initial install process - boot the server from the Install DVD and run the entire OS installation and configuration remotely via Server Assistant)
Note: If you're not running Mac OS X Server on the cluster nodes then the above doesn't apply

Help with importing lens profile to Lightroom 5.4 for Windows

Hi,
I'm running Adoble Lightroom 5.4 on Windows. I recently bought a Rokinon 14mm lens for Canon and have a couple lens profiles that I want to try out. I have already tried importing to the two following locations below and nothing showed up when I restarted Lightroom. Any solutions?@@
C: > Users > User > AppData > Roaming > Adobe > CameraRaw > LensProfiles > 1.0 > Then I created a folder called Downloaded > Then I created another folder inside the folder Downloaded called Rokinon and dropped the lens profiles in there.
Here is the other one I tried:
C: > Program Files > Adobe > Adobe Photoshop Lightroom 5.4 > Resources > LensProfiles > 1.0 > Then I created a folder called called Rokinon and dropped the lens profiles in there.

Something is weird about this lens profile file. It appears to be for a Canon 85mm lens, not a Samyang 14mm lens, and, as you say, this profile is for JPG files not RAW files. If you want it to apply to raw files you need to change the CameraRawProfile from False to True.
After changing the False to True, because the Make is set to Canon you have to go to the Canon lens list not the Samyang list in the Lens Profile selection dropdown list, or edit the Make to have Samyang..
Because there is an 85 for several focal-length numbers, not 14, I think the correction being applied may be totally wrong. Where did you get this lens profile file? The other profile file you sent has 50mm in some focal-length areas and 85 in others.
To be able to tell if this, or the other profile, is reasonable, you probably need to take a picture of something with a grid of lines, like a brick wall and see if there is barrel or pincushion distortion that is corrected or worsened.
Here is a screencapture of the file as it looks in a text editor with notes about what seems wrong:

Help with links for installing 11.2.0.3 on Windows 64 bit

Hi
I downloaded Oracle 11gR2 for 64 bit windows, from oracle website.
All I could got was as in the link below..
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win64soft-094461.html
Oracle Database 11g Release 2 (11.2.0.1.0) for Microsoft Windows (x64)
win64_11gR2_database_1of2.zip (1,213,501,989 bytes) (cksum - 3906682109)
win64_11gR2_database_2of2.zip (1,007,988,954 bytes) (cksum - 1232608515)
I installed these and installed database on my TEST NEW DB SERVER .Now my database is 11.2.0.1.0
I want to have 11.2.0.3
1)Please give correct links to do the above.
I have account on My Oracle Support.
2)Please give link to step by step procedure to do this
3)I want the database to have latest patchset as well.
4)Also when I am going to do the install in new LIVE server, please give me the link for the fresh straight install to 11.2.0.3 without having to do twice as I have to do in test:(
(I only realized later that i have to take link straight from my oracle support, but need to clarify the right link as it is for LIVE)
Thanks&Regards..
Edited by: Krithi on 05-Feb-2013 04:36

Krithi wrote:
Hi
I downloaded Oracle 11gR2 for 64 bit windows, from oracle website.
All I could got was as in the link below..
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win64soft-094461.html
Oracle Database 11g Release 2 (11.2.0.1.0) for Microsoft Windows (x64)
win64_11gR2_database_1of2.zip (1,213,501,989 bytes) (cksum - 3906682109)
win64_11gR2_database_2of2.zip (1,007,988,954 bytes) (cksum - 1232608515)
I installed these and installed database on my TEST NEW DB SERVER .Now my database is 11.2.0.1.0
I want to have 11.2.0.3
1)Please give correct links to do the above.
I have account on My Oracle Support.Pl see this MOS Doc
Quick Reference to RDBMS Database Patchset Patch Numbers [ID 753736.1]
2)Please give link to step by step procedure to do thisThe install process is the same as for 11.2.0.1 - http://docs.oracle.com/cd/E11882_01/install.112/e24186/toc.htm
3)I want the database to have latest patchset as well.
See the above MOS Doc - apply the latest PSU patch on top on 11.2.0.3.
4)Also when I am going to do the install in new LIVE server, please give me the link for the fresh straight install to 11.2.0.3 without having to do twice as I have to do in test:(
(I only realized later that i have to take link straight from my oracle support, but need to clarify the right link as it is for LIVE)
See above MOS Doc
Thanks&Regards..
Edited by: Krithi on 05-Feb-2013 04:36HTH
Srini

Help with domain migration of a HyperV ( csv ) CLUSTER on Windows 2008R2

Similar Messages

Maybe you are looking for