Help with Downgrading to Windows 7 on HP Envy 15z-j000?

Hey guys, I've seen a lot of helpful posts on here about downgrading to Windows 7 on various notebooks, and I could use some help on mine. I'll keep it simple because I really need help! I obtained a Windows 7 Professional .iso and I have it on a USB Drive, already formatted and ready to boot. When I tried to install Windows on the laptop though, it says I'm missing the correct drivers. What are the drivers I need? Where can I find them? Where do I install them to? Any help is appreciated! Thanks a lot!

The very best way, and fastest method to install Windows 7 is by use of the Microsoft store's Windows 7 USB\DVD download tool. Creating a Windows 7 installer with that method has always worked for me. I highly suggest that you download it and use it.
After you have created the installer connect it to a usb port. Press the power button and immediately tap the Esc key to enter the startup menu. Choose F10 for BIOS. In the BIOS, select the System Configuration tab, then Boot options to make sure that Legacy support is enabled and secure Boot is disabled. Change the boot order to ensure that USB diskette on key\USB hard disk is the first boot option and then save the changes. Your notebook should boot right into the Windows 7 installer on the usb flash drive.
Windows 7 has builtin native SATA drivers and should not need any assistance from you in installing them . Can you post the exact error message that you are seeing on screen? Only bother with doing that if you get the same message when using the usb installer created from the Microsoft store's Windows 7 USB\DVD download tool.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

Hp Envy 15z-j000 Windows 7 64 bit drivers?

I need help I just got a new Hp Envy 15z-j000 from ebay today I didn't like Windows 8 operating system so I downgraded to Windows 7 64 bit Operating system. Little did I know I would run into problems (yes I know this doesn't have a cd drive in it ) I thought I could put driver files on my usb flash drive to hopefully get everything working this laptop doesn't even recognize the usb flash drive probably because the drivers aren't installed! what a mess so now am i screwed I need the drivers and.... to somehow get this thing to work again?? PLEASE HELP!!

Hi:
See if these work...
First, you have to install the AMD chipset driver and reboot.
You want the first file listed on the webpage.
http://support.amd.com/en-us/download/chipset?os=Windows 7 - 64
The graphics is the fun part. You can first try running the Latest AMD Beta driver from the link below and maybe it will install the drivers If not, then let me know and I will give you some other method to install it using that driver.
http://support.amd.com/en-us/download/mobile?os=Windows 7 - 64
Audio:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127790-1&cc=us&dlc=en&lc=en...
Ethernet: Install the second file on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy...
Wireless:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&s...
USB 3.0: Install both of these drivers...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&sp...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&sp...
Card reader:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&s...
Webcam:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&s...

I need help with downgradeing my ios for my ipod touch 4th gen

i need help with downgradeing my ios for my ipod touch 4th gen

As has alwys been the case, you cannot go back.
Sorry

Help with Open Browser Window

I built a site named greenscapepump.com. I used the behavior
"Open Browser Window" that allows a photo to be viewed in a smaller
window. I have it set up to double-click the photo name to go to
the browser window. It works on some computers but not others. I
used the same behavior on other pages in the same web site and it
is working on all computers.
The three pages under the menu "Portfolio" are: Architectural
Fountains, Waterfalls and Streambeds, and Floating Fountains, are
the pages that have problems with this behavior on some computers.
Is this an individual computer problem, or do I need to do
something in Dreamweaver to fix it?

OMG - the code on the architecturalfountains page is a horror
Why do you need to use doubleclick.... most users are
accustomed to clicking
on a link wait for something to happen....
Also, the code for that dropdown is massive... are you really
committed to
that menu?
The validator found quite a few errors on that particular
page - I didn't
test each page (that's up to you :) these errors aren't
helping with your
page load also - one of the pages (can't recall which now)
just kept trying
to load and never did stop... try fixing the errors (some
more important
than others to the well being of your page) and then see
where you are at
with your pages... I'd also suggest changing the
'doubleclick' to just the
one click - really no need for anything else.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fgreenscapepump.com%2Farchitectura lfountains.html%23
Nadia
Adobe® Community Expert : Dreamweaver
http://www.DreamweaverResources.com
|Tutorials|SEO |CSS Templates
http://www.csstemplates.com.au
http://www.adobe.com/devnet/dreamweaver/css.html
CSS Tutorials for Dreamweaver
"texasgranny" <[email protected]> wrote in
message
news:ef9h1v$4h8$[email protected]..
:I built a site named greenscapepump.com. I used the behavior
"Open Browser
: Window" that allows a photo to be viewed in a smaller
window. I have it
set up
: to double-click the photo name to go to the browser window.
It works on
some
: computers but not others. I used the same behavior on other
pages in the
same
: web site and it is working on all computers.
: The three pages under the menu "Portfolio" are:
Architectural Fountains,
: Waterfalls and Streambeds, and Floating Fountains, are the
pages that have
: problems with this behavior on some computers.
: Is this an individual computer problem, or do I need to do
something in
: Dreamweaver to fix it?

Need help with Verizon DSL & Windows XP

Hello All,
I am personally running Verizon FIOS without any problems. However, my father-in-law still has Verizon DSL, which he has been using without any problems for the last 4 years until now.
To make the long story short, it seems that the LAN card that came with his old Dell PC died. I pulled it (there is no LAN NIC on the motherboard), and installed a new LAN card, which supports 10/100 MBps and is RoHS complient. However, for some unknown still to us reason, he is getting the LAN "Limited Connection" error.
I have tried everything I could think of, and spent over 6 hours with 3 different Verizon DSL tech support folks. However, we cannot even get to 192.168.1.1 (which is the address of the Westell 6100). I have tried even slowing the LAN card to 10 Mbps / Half-Duplex (or Full). TCP/IPv4 is set to obtain IP / DNS automatically and etc... It's also set to DHCP.
We know fo sure that his Verizon DSL connection does work. Why? Because when I plugged in the same Ethernet cable into a laptop that I brought with me, we had an instant Internet connection (running Windows 7).
So it must be something within Windows XP that is blocking access. I am trying to do everything to not having for him to buy a new computer at this time and save the current system.
I have deleted any and all Network cards drivers in the Control Panel / System / Devices. I have NOT messed with any registry tricks, but am now willing.
Any and all help with suggestions is greately appreciated.

Best guess is that you need a WindowsXP compatible driver for your new LAN card. You definitely need a driver, so if you "deleted any and all Network cards drivers" it isn't going to work. Go to the company website for the new LAN card and they should have a suitable driver.
There should not be any need to mess with the registry.

Need serious help with quicktime for windows. PLEASE HELP!!! : (

So i had quicktime on my windows program list and have had it since i bought the computer back in 08' well i got it back from a pawn shop after being down on my luck and they wiped everything out. ever since then i have been uploading pics and videos from my digital camera and the pics are fine but alot of the vids that i have put on here cannot be viewed and when i try to watch them i get an error message saying i need the latest version of quicktime. so i have tried uninstalling it after many failed update attemtps and i cannot get it to uninstall i have tried everything imaginable, from windows utility cleanup to removing it in add/remove programs to just deleting the files in the program list folder. Nothing. i get a prompt saying "the feature you are trying to use is on a resource that is unavailable." and then it goes on to say.. "Click ok to try again or enter an alternate path to a folder containing the installation package 'quicktime.msi' in the box below." and it already has two diffrent paths located in the entry box and i have tried them both and it keeps giving me the same message as i posted above. i am so lost and it dont help that i dont really know a whole lot about computers. i am stuck between a rock and a hard place.any input would be greatly appreciated. thanks!

i get a prompt saying "the feature you are trying to use is on a resource that is unavailable." and then it goes on to say.. "Click ok to try again or enter an alternate path to a folder containing the installation package 'quicktime.msi' in the box below."
Unfortunately, these sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing QuickTime again. Does the install go through properly this time?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Need help with refreshing open window in new tab

Hello all,
First, all my other problems I've solved. One last thing, being a newbie and trying things I've found on the net and them
not working, I can use your help one last time. My code has a Home page that peforms a Search (most of you have
I am sure done this), and from that search submit a window opens in a new tab (browser tab) and has the results on
it.
That works fine. What I'm having trouble with is being able to perform a new search and refreshing that open window
with the new data. Right now I am closing that window by clicking on the tab and then performing the search.
While it works, it's not user friendly.
So, I've tried the usual mywindow=window.open("url.cfm"); and then trying to grab that handle to refresh, but to
no avail. Has anyone done this?
Thanks!

Here's an example of how you could do it.
<script>
function submitAndFocusTarget(form) {
var win = window.open("", form.target);
form.submit();
win.focus();
</script>
<form action="index.cfm" target="mysearchwin" method="get" onsubmit="submitAndFocusTarget(this); return false;">
<input type="text" name="search" value="" />
<input type="submit" value="search" />
</form>

Need help with a popup window problem

I have this code within my certAppB.js page :
function AppSubmit() {
     str1 = "Submitting this form will begin the approval process.";
     str2 = "You will not be able to come back to this form to edit it again.";
     str3 = "Do you want to continue submitting this form?";
     if((confirm(str1 + "\n" + str2 + "\n" + str3))){
          document.forms[0].status.value="Submitted";
          document.forms[0].submit();
Which produces a popup windows that says:
Submitting this form will begin the approval process
You will not be able to come back to this form to edit it again
Do you want to continue submitting this form?
OK Cancel (these are 2 buttons)
I want to change this to say:
Submitting this form will begin the approval process. You will not be able to change this form once submitted. You also agree that the following statement is true and correct to the best of your knowledge and belief:
"I, [User Name], hereby certify and state on behalf of [Company Name] that the energy use data contained on this form are accurately determined and stated in accordance with federal test procedures set forth in 10 CFR Part 430 or 431, or 42U.S.C.�6314, as applicable, including authorized waivers, as they currently exist on [Date]."
Do you want to continue submitting this form?
OK           Cancel
So I have to pull the users [User Name], [Company Name], and the [Date].
On the approverView.jsp login page ( which is the first login page users see after loggin) it shows
the users full name, so I nabbed the code from that page:
<body>
<jsp:include page="logo.jsp" />
<jsp:include page="unav-navigate.jsp" />
<table width="100%" border="0" cellspacing="0" cellpadding="5" class="info">
<tr>
<td width="25%" valign="top">
<logic:present name="UserContainer" property="userView" scope="session">
<span class="welcome">Welcome
<bean:write name="UserContainer" property="userView.firstName" scope="session"/>
<bean:write name="UserContainer" property="userView.lastName" scope="session"/>
!</span><br>
</logic:present>
<span class="sm">If you are not this person, please click <html:link styleClass="norm" href="/fake_name/logoff.do">here</html:link>.</span></td>
<td width="2%"> </td>
<td width="73%" valign="top"><jsp:include page="instruction.jsp" /></td>
</tr>
</table>
and made this code out of it to pull the username,companyname:
<logic:present name="UserContainer" property="userView" scope="session">
<span class="User"> User
<bean:write name="UserContainer" property="userView.firstName" scope="session"/>
<bean:write name="UserContainer" property="userView.lastName" scope="session"/>
!</span><br>
</logic:present>
<logic:present name="UserContainer" property="userView" scope="session">
<span class="Company">Company
     <bean:write name="UserContainer" property="userView.companyName" scope="session"/>
!</span><br>
</logic:present>
This is the userView.java page that is referanced :
* Created on Mar 28, 2003
* To change this generated comment go to
* Window>Preferences>Java>Code Generation>Code Template
package org.fake.name.view;
import java.io.Serializable;
import java.util.List;
import org.gama.cafs.businessobjects.TorqueDb;
* @author chris
public class UserView implements Serializable {
     private int userId;
     private int memberId;
     private int companyId;
     private String role;
     private String firstName;
     private String lastName;
     private String companyTitle;
     private String emailAddress;
     private String phoneNumber;
     private String companyName;
     private String address1;
     private String address2;
     private String address3;
     private String city;
     private String state;
     private String province;
     private String postalCode;
     private String countryName;
     private List productTypes = null;
     private List productTypeAcronyms = null;
     private List productTypeIds = null;
     private List tradeNameIds = null;
     private List tradeNames = null;
     private TorqueDb torqueDb = null;
     public UserView() { }
     * @return String
     public String getAddress1() {
          return address1;
     * @return String
     public String getAddress2() {
          return address2;
     * @return String
     public String getAddress3() {
          return address3;
     * @return String
     public String getCity() {
          return city;
     * @return String
     public String getCompanyName() {
          return companyName;
     * @return String
     public String getCompanyTitle() {
          return companyTitle;
     * @return String
     public String getCountryName() {
          return countryName;
     * @return String
     public String getEmailAddress() {
          return emailAddress;
     * @return String
     public String getFirstName() {
          return firstName;
     * @return String
     public String getLastName() {
          return lastName;
     * @return int
     public int getMemberId() {
          return memberId;
     * @return String
     public String getPhoneNumber() {
          return phoneNumber;
     * @return String
     public String getPostalCode() {
          return postalCode;
     * @return Set
     public List getProductTypes() {
          return productTypes;
     * @return String
     public String getProvince() {
          return province;
     * @return String
     public String getRole() {
          return role;
     * @return String
     public String getState() {
          return state;
     * @return int
     public int getUserId() {
          return userId;
     * Sets the address1.
     * @param address1 The address1 to set
     public void setAddress1(String address1) {
          this.address1 = trimString(address1);
     * Sets the address2.
     * @param address2 The address2 to set
     public void setAddress2(String address2) {
          this.address2 = trimString(address2);
     * Sets the address3.
     * @param address3 The address3 to set
     public void setAddress3(String address3) {
          this.address3 = trimString(address3);
     * Sets the city.
     * @param city The city to set
     public void setCity(String city) {
          this.city = trimString(city);
     * Sets the companyName.
     * @param companyName The companyName to set
     public void setCompanyName(String companyName) {
          this.companyName = trimString(companyName);
     * Sets the companyTitle.
     * @param companyTitle The companyTitle to set
     public void setCompanyTitle(String companyTitle) {
          this.companyTitle = trimString(companyTitle);
     * Sets the countryName.
     * @param countryName The countryName to set
     public void setCountryName(String countryName) {
          this.countryName = trimString(countryName);
     * Sets the emailAddress.
     * @param emailAddress The emailAddress to set
     public void setEmailAddress(String emailAddress) {
          this.emailAddress = trimString(emailAddress);
     * Sets the firstName.
     * @param firstName The firstName to set
     public void setFirstName(String firstName) {
          this.firstName = trimString(firstName);
     * Sets the lastName.
     * @param lastName The lastName to set
     public void setLastName(String lastName) {
          this.lastName = trimString(lastName);
     * Sets the memberId.
     * @param memberId The memberId to set
     public void setMemberId(int memberId) {
          this.memberId = memberId;
     * Sets the phoneNumber.
     * @param phoneNumber The phoneNumber to set
     public void setPhoneNumber(String phoneNumber) {
          this.phoneNumber = trimString(phoneNumber);
     * Sets the postalCode.
     * @param postalCode The postalCode to set
     public void setPostalCode(String postalCode) {
          this.postalCode = trimString(postalCode);
     * Sets the productTypes.
     * @param productTypes The productTypes to set
     public void setProductTypes(List productTypes) {
          this.productTypes = productTypes;
     * Sets the province.
     * @param province The province to set
     public void setProvince(String province) {
          this.province = trimString(province);
     * Sets the role.
     * @param role The role to set
     public void setRole(String role) {
          this.role = trimString(role);
     * Sets the state.
     * @param state The state to set
     public void setState(String state) {
          this.state = trimString(state);
     * Sets the userId.
     * @param userId The userId to set
     public void setUserId(int userId) {
          this.userId = userId;
     * @return List
     public List getProductTypeAcronyms() {
          return productTypeAcronyms;
     * Sets the productTypeIds.
     * @param productTypeIds The productTypeIds to set
     public void setProductTypeAcronyms(List productTypeAcronyms) {
          this.productTypeAcronyms = productTypeAcronyms;
     public List getProductTypeIds() {
          return productTypeIds;
     public void setProductTypeIds(List productTypeIds) {
          this.productTypeIds = productTypeIds;
     private String trimString(String str) {
          String tmp = null;
          if (str != null)
               tmp = str.trim();
          else
               tmp = str;
          return tmp;
     public List getTradeNameIds() {
          return tradeNameIds;
     public List getTradeNames() {
          return tradeNames;
     public void setTradeNameIds(List list) {
          tradeNameIds = list;
     public void setTradeNames(List list) {
          tradeNames = list;
     public TorqueDb getTorqueDb() {
          return torqueDb;
     public void setTorqueDb(TorqueDb db) {
          torqueDb = db;
     public int getCompanyId() {
          return companyId;
     public void setCompanyId(int i) {
          companyId = i;
Question:
How do I insert the code I assembled:
<logic:present name="UserContainer" property="userView" scope="session">
<span class="User"> User
<bean:write name="UserContainer" property="userView.firstName" scope="session"/>
<bean:write name="UserContainer" property="userView.lastName" scope="session"/>
!</span><br>
</logic:present>
<logic:present name="UserContainer" property="userView" scope="session">
<span class="Company">Company
     <bean:write name="UserContainer" property="userView.companyName" scope="session"/>
!</span><br>
</logic:present>
INTO the function:
function AppSubmit() {
     str1 = "Submitting this form will begin the approval process.";
     str2 = "You will not be able to come back to this form to edit it again.";
     str3 = "Do you want to continue submitting this form?";
     if((confirm(str1 + "\n" + str2 + "\n" + str3))){
          document.forms[0].status.value="Submitted";
          document.forms[0].submit();
So that the popup window will show the [username], [CompanyName], [Date]. I can�t find any doc�s on how to insert logic into a function with str�s.
Any help would be very much appreciated. Thanks in advance.
Applications used by me: Sun solaris 8 server, Tomcat 4.1.24, pulling from postgresql 7.3, and I edit in Eclipse 2.11.

These two tags:
<logic:present name="UserContainer" property="userView" scope="session">
</logic:present>
surround things you only want to happen if there is a userView object present.
This tag:
<bean:write name="UserContainer" property="userView.firstName" scope="session"/>
is replaced with the value of userView.getFirstName().
So:
<logic:present name="UserContainer" property="userView" scope="session">
<span class="User"> User
<bean:write name="UserContainer" property="userView.firstName" scope="session"/>
<bean:write name="UserContainer" property="userView.lastName" scope="session"/>
!</span><br>
</logic:present>
becomes:
User Jim Steinberger !
if the userView object is present and firstName == Jim and lastName == Steinberger.
To insert those values into your JavaScript function:
<logic:present name="UserContainer" property="userView" scope="session">
function AppSubmit() {
str1 = "Submitting this form will begin the approval process.";
str2 = "You will not be able to come back to this form to edit it again.";
str3 = "You also agree that the following statement is true and correct to the best of your knowledge and belief:";
str4 = "";
str5 = "I, <bean:write name="UserContainer" property="userView.firstName" scope="session"/>
<bean:write name="UserContainer" property="userView.lastName" scope="session"/>, hereby certify and state on behalf of <bean:write name="UserContainer" property="userView.companyName" scope="session"/> that the energy use data contained on this form are accurately determined and stated in accordance with federal test procedures set forth in 10 CFR Part 430 or 431, or 42U.S.C.?6314, as applicable, including authorized waivers, as they currently exist on " + new Date().getDate() + "/" + new Date().getMonth() + "/" + new Date().getFullYear() + ".";
str6 = "Do you want to continue submitting this form?";
if((confirm( str1 + "\n" + str2 + "\n" + str3 + "\n\n\n" + str4 + "\n" + str5 + "\n" + str6 ))){
document.forms[0].status.value="Submitted";
document.forms[0].submit();
</logic:present>
Should become:
function AppSubmit() {
str1 = "Submitting this form will begin the approval process.";
str2 = "You will not be able to come back to this form to edit it again.";
str3 = "You also agree that the following statement is true and correct to the best of your knowledge and belief:";
str4 = "I, Jim Steinberger, hereby certify and state on behalf of Dynamic Edge, Inc. that the energy use data contained on this form are accurately determined and stated in accordance with federal test procedures set forth in 10 CFR Part 430 or 431, or 42U.S.C.?6314, as applicable, including authorized waivers, as they currently exist on " + new Date().getDate() + "/" + new Date().getMonth() + "/" + new Date().getFullYear() + ".";
str6 = "Do you want to continue submitting this form?";
if((confirm( str1 + "\n" + str2 + "\n" + str3 + "\n\n" + str4 + "\n" + str5 + "\n\n" + str6 ))){
document.forms[0].status.value="Submitted";
document.forms[0].submit();
after being processed by Tomcat and Struts. (Note: the function will not appear if userView is missing)
By the way, you might be missing the closing bracket to function AppSubmit() { which might throw a JavaScript error. Just FYI :)
Good luck!
Jim Steinberger
[email protected]

Help with Quicktime for Windows 7 64-bit

I am having a problem with the latest version of Quicktime for Windows. When I launch Quicktime and then 'click' on any icon for download I can see the sentence, "Connecting to iTunes" and then I am redirected to download iTunes... Problem is that I already have iTunes.
Windows 7 Ultimate 64-bit SP1 and up to date.
iTunes version 11.1.3.8
Quicktime version 7.74.80.86
I Unibstalled both products, using the guide provided from Apple. I, then downloaded and installed iTunes first, then I downloaded Quicktime and installed it. I had the same issue. Next, I went to Control Panel/ "programs and Features, used the "change" option and clicked "repair". I did this for both iTunes and Quicktime. They ran fine. No error messages, nothing in event logs, no trace of an install log to try to diagnose this myself. Does anyone have this problem, or can anyone help me to start the diagnosis necessary to solve this?
Second issue came to light after all of the steps I performed; Before, I would conect my iPhone to a USB port and iTunes would launch automatically. Now, it does not. I see my 4s in devices and I see a normal state using device manager. So, I went to "Default Programs" and selected my 4s and the dropdown window no longer has an option for iTunes. However, when I go to choose a default program for audeo, etc. the dropdown mwnu has an option for iTunes.
Thanks for reading and I would like some help.
Doug Shreve

I found the problem and the solution. In Internet Explorer ver 11 / manage plugin's, make sure that the Apple plugin's are enabled. My setings were incorrect, the plugin ws siabled. Enabled it and all is well!

Help with CS3 on Windows 7 hard drive.

I have Photoshop CS3 on an XP hard drive. I have a Windows 7 hard drive now and cannot access Photoshop on the other hard drive and it won't let me install in on the new hard drive. Do I need a patch or something? It tells me to uninstall and install again, but it's on the other hard drive and I don't know how to uninstall it there and really need to get this installed again as I need to do a memorial brochure for a friend. Any help will be appreciated. Thank you.

You either have to reconnect the old drive as the C: drive and uninstall, well actually, deauthorize photoshop. then switch drives again.
Or
You can notify Adobe that you have more than 2 computers with photoshop installed (the old drive counts as a computer) you need then to reset your license.
Now I am assuming how photoshop was installed, If you already had 2 drives and installed on the second drive instead of the main drive and something went wrong so you can no longer access it. Thats another story.
Adobe has a cleaner app that can find photoshop and remove all traces of it for you, so you can resinstall it. I never used that app, so I can not give advice on how it works, but I have heard other recommend using it.

Need Help with safari for Windows 8

i am stuck with the need to have a pc due to a proprietary business software... I am a mac user and prefer to use safari... i just had to by a new pc and tried to download safari for windows 8.1 but cannot find it... any help out there?

Apple hasn't supported Safari for Windows in quite a while (and even when they did, you wouldn't want it - total crap). IE 11 actually isn't bad, you can also try Chrome.

Help with pop up window

Hi
I am developing a site with Dreamweaver CS3. My problem is
that I need to define certain words in the site which when clicked,
open a seperate browser window that shows the definition of the
word. The new window that opens contains all the definitions to
numerous words. I have the links from each word to the definition
list window working properly but I would like the window to open
and make the word that the user clicked on be shown without the
user having to scroll to the word he is trying to define. Ex. If
the user clicks on the word "Default", when the definition window
opens, I would like the list to be scrolled automatically to that
word.
Any help would be appreciated.
Thanks

Captain825 wrote:
> Thank you, it works perfectly! One last question. Can
you tell me how to control the size of the definition page so that
it opens to a specific size each time?
>
> Thank you
>
i am guessing, since we've not seen your page, that you are
using the
target attribute to open the new window? If so, it is not
possible to
control the size of the window that it opens. Moreover, and
even worse,
it will spawn multiple windows - i.e. each time the user
clicks, a brand
new window will open and need to be manually closed.
Better would be to do this using a window.open() script. DW
offers a
built-in Behavior, called Open Browser Window. But it has its
own
issues, not the least of which is it too spawns multiple
windows.
I offer an inexpensive DW Extension that makes all this
really easy. It
will not spawn multiple windows, it does not require adding a
behavior
to each link, it can be added to all your pages at once, and
many more
options and benefits. You can see it at
http://divahtml.com/products/divaPOPgold/open_popup_windows.php
Hope that helps.
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia

Need help with pop up window!

I'm working on an online graphic design portfolio and one of the pages features online animated Flash banners. The site can be viewed here...
http://truetilldeathhq.com/Skiz/main8_v7.html
I created a pop up window that displays a swf of the banner by putting this code on the View Banner link of each example of work...
on (release) {
var jscommand:String = "window.open('http://www.truetilldeathhq.com/Skiz/banners/336x280DuvalCX9.html','win','height= 296,width=352,left=112,top=330,toolbar=no,resizable=no,location=no,scrollbars=no ');";getURL("javascript:" + jscommand + " void(0);");
Two problems though. First is in Firefox the location bar with the url to the swf is visible, even though I set location=no as a variable in the code (it works ok in Safari). The window is also resizable in Firefox and Safari even though the variable is set to resizable=no. How can I fix this?
Second problem, even though I painstakingly set the left and top variables by trial and error to get the pop up window to open exactly in the center of the "stage" area of the site, when I post it and view it in a browser, the window pops up lower. When I'm in the fla of the site and I preview it in a browser, it's fine, but for some reason when I post the files online and then open it from http://truetilldeathhq.com/Skiz/main8_v7.html, the pop ups come in lower. Any fixes or advice on this?
Thanks for your help!

Forgive me for my ignorance, but I'm new to Flash and any kind of scripting and I didn't quite follow that page you directed me to. Right now I'm working up a Flash template and the action on the link for the banner pages looks like this:
on(rollOver) {
this.gotoAndPlay("s1");
on(rollOut, releaseOutside) {
this.gotoAndPlay("s2");
on (release) {
_root.popup_pressed=1;
_root.scrHEIGHT=240
_root.scroller.scroller.gotoAndStop(2);
_root.TM_title = "Work 1 read more";
_root.READ = 1;
_root.scroller.gotoAndPlay("s1");
How can I work up the on (release) so I'll get a simple pop up window, say 728x90, no scrollbars or resizing, that will open somewhere in the middle of the site? If I wanted a title to the pop up window, how would I do that?
Again, thanks so much for your time and excuse my newbieness.

Help With Contacts in Windows 7

Hi Everyone,
I need a hand putting my contacts onto my new iPhone from the Windows 7 world. Windows 7 no longer includes Address Book, so I need a solution for importing my contacts from Gmail onto my Acer One Netbook (I know I should have a Mac) and then syncing them with my iPhone.
I need the contacts on the iPhone because I have Microsoft SYNC in my Ford Fusion and for the voice recognition to work with my iPhone, the information must be on the phone itself - it cannot be a Mobile Me or Windows Live solution....
Any suggestions or help?
Really appreciate it!

You can import the contacts from Google to your iPhone by going mail/contacts/calendars and adding the gmail account as a microsoft exchange account instead of the standard gmail setup. Be sure to put m.google.com for the server address and leave domain blank. Once the contacts are on the iPhone, then on to copying them from the iphone to the car's sync my ride system.

I need help with itunes for windows 7.

wondering if any one can help? i am running windows 7 and i recently had trouble with itunes it used to open and work, when i recieved my new iphone itunes decided not to open any more i tried un-install and re-install and it didnt work i reset my laptop back to its factory settings and re-installed itunes it worked for that day then went wrong again. i have tried doing apple software update and it comes up with error and some numbers followed by cc. if i try and re-install itunes it says invalid right to use bonjour.
any help? thanks

I have absolutely no idea who Ari is
It appears you do not know how to use this forum
To reply back to Ari, you should have done that on the same thread so that he can see it
Yes, you can call Apple if you are willing to pay for it
Allan

Help with Downgrading to Windows 7 on HP Envy 15z-j000?

Similar Messages

Maybe you are looking for