Help with Dreamweaver 3

Hi folks, I use Dreamweaver for some basic web design. I
bought a copy of Dreamweaver 3 of Ebay. Im trying to install it on
my macbook running OS X Tiger. It is a MAC disc but when I try to
install it says "cannot open dreamweaver 3 installer because it is
not supported by this system" Can anyone help me with this?

> It is a MAC disc but when I try to install it says
"cannot open
> dreamweaver 3 installer because it is not supported by
this system"
something to try- go into System Preferences and manually
launch Classic.
Then from within the Classic Finder, launch the installer.
it still may not work well or at all.
Or- if you have an older mac that can actually boot up in
classic- do that.
But- you have a macbook and it can't.-
dreamweaver 3 was a nice small app that would run on systems
with 16 megs
and race on 32 megs of ram. I used it on a UMAX clone running
system 8.1
with 384 megs. schweeeet set up for the time. It did have
some bugs that
were never fixed.
it was released in 1999. Translating computer years to an
automotive
equivalent- you just bought a 1962 Ford Falcon 4 door and are
approaching
the on ramp to the 495 beltway.
If you do get it going, and do use it- my suggestions:
If it has Timelines in the menu, don't bother with them.
I don't think Layout Mode came out till dw 4 but it has it,
don't use it.
Many of the javascripts in the Behaviors Panel are way out of
date and will
cause errors or be ignored in modern browsers.
My real suggestion: get modern software to use on your modern
computer.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Similar Messages

Help with Dreamweaver MX

I have a problem with Dreamweaver MX "unexpectedly quitting,"
every time I try to open the program. I am running Mac OS 10.2.8. I
have the console crash log for the program which I'll paste below.
quote:
Command: Dreamweaver MX
PID: 1201
Exception: EXC_BAD_ACCESS (0x0001)
Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00000004
Thread 0 Crashed:
#0 0x00a15b8c in 0xa15b8c
#1 0x006d6770 in 0x6d6770
#2 0x006d4b60 in 0x6d4b60
#3 0x00216894 in 0x216894
#4 0x00215ab0 in 0x215ab0
#5 0x00a25b94 in 0xa25b94
#6 0x00a25cec in 0xa25cec
#7 0x00a29924 in 0xa29924
#8 0x00a29750 in 0xa29750
Thread 1:
#0 0x90073ba8 in mach_msg_trap
#1 0x90005ed0 in mach_msg
#2 0xc0009190 in __ape_internal
#3 0xc0000efc in __ape_agent
#4 0x90020c28 in _pthread_body
Thread 2:
#0 0x90073ba8 in mach_msg_trap
#1 0x90005ed0 in mach_msg
#2 0x9022a720 in SwitchContexts
#3 0x90224fc8 in YieldToThread
#4 0x90243128 in SetThreadState
#5 0x9026d948 in SetThreadStateEndCritical
#6 0x009e7c28 in 0x9e7c28
#7 0x009e68e4 in 0x9e68e4
#8 0x009e67e0 in 0x9e67e0
#9 0x009e6bcc in 0x9e6bcc
#10 0x009e7f64 in 0x9e7f64
#11 0x9023bba8 in CooperativeThread
#12 0x90020c28 in _pthread_body
Thread 3:
#0 0x9000508c in syscall
#1 0x90515d0c in BSD_waitevent
#2 0x905156dc in CarbonSelectThreadFunc
#3 0x90020c28 in _pthread_body
Thread 4:
#0 0x9003e9a8 in semaphore_wait_signal_trap
#1 0x9003e7c4 in _pthread_cond_wait
#2 0x9051dbf0 in CarbonOperationThreadFunc
#3 0x90020c28 in _pthread_body
PPC Thread State:
srr0: 0x00a15b8c srr1: 0x0200f030 vrsave: 0x00000000
xer: 0x20000000 lr: 0x006d6770 ctr: 0x00defd50 mq:
0x00000000
r0: 0x006d6770 r1: 0xbffff460 r2: 0x0104c000 r3: 0x00000000
r4: 0x00000000 r5: 0x0000004d r6: 0x011e420a r7: 0x000000b0
r8: 0x02befe88 r9: 0xa0220a00 r10: 0x0250e760 r11:
0xa0221738
r12: 0x012e28b4 r13: 0x00000000 r14: 0x00000000 r15:
0x00000000
r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19:
0x00000000
r20: 0xbffffe18 r21: 0x00000001 r22: 0x012632a8 r23:
0x011e34bc
r24: 0x00000001 r25: 0x00000001 r26: 0x011e41c0 r27:
0x02cf2d50
r28: 0x02cf2d70 r29: 0x00000000 r30: 0x0286bdc0 r31:
0x00000000
I think I know the cause of the program though. I was trying
to install some extensions using the extension manager. After I
launched Dreamweaver after installing the extensions, the problem
started.
I have the extensions that I was trying to install if that
would help.
I would really like someone to help me with this problem.
Please tell me if you don't think this is the correct forum to post
it in.
Maybe it is Apple's fault.
Thanks in advance.
Jylan

Have you tried uninstalling that extension? Which one was it?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"jyilan" <[email protected]> wrote in
message
news:[email protected]...
>I have a problem with Dreamweaver MX "unexpectedly
quitting," every time I
>try
> to open the program. I am running Mac OS 10.2.8. I have
the console crash
> log
> for the program which I'll paste below.
>
>
quote:
> Command: Dreamweaver MX
> PID: 1201
>
> Exception: EXC_BAD_ACCESS (0x0001)
> Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00000004
>
> Thread 0 Crashed:
> #0 0x00a15b8c in 0xa15b8c
> #1 0x006d6770 in 0x6d6770
> #2 0x006d4b60 in 0x6d4b60
> #3 0x00216894 in 0x216894
> #4 0x00215ab0 in 0x215ab0
> #5 0x00a25b94 in 0xa25b94
> #6 0x00a25cec in 0xa25cec
> #7 0x00a29924 in 0xa29924
> #8 0x00a29750 in 0xa29750
>
> Thread 1:
> #0 0x90073ba8 in mach_msg_trap
> #1 0x90005ed0 in mach_msg
> #2 0xc0009190 in __ape_internal
> #3 0xc0000efc in __ape_agent
> #4 0x90020c28 in _pthread_body
>
> Thread 2:
> #0 0x90073ba8 in mach_msg_trap
> #1 0x90005ed0 in mach_msg
> #2 0x9022a720 in SwitchContexts
> #3 0x90224fc8 in YieldToThread
> #4 0x90243128 in SetThreadState
> #5 0x9026d948 in SetThreadStateEndCritical
> #6 0x009e7c28 in 0x9e7c28
> #7 0x009e68e4 in 0x9e68e4
> #8 0x009e67e0 in 0x9e67e0
> #9 0x009e6bcc in 0x9e6bcc
> #10 0x009e7f64 in 0x9e7f64
> #11 0x9023bba8 in CooperativeThread
> #12 0x90020c28 in _pthread_body
>
> Thread 3:
> #0 0x9000508c in syscall
> #1 0x90515d0c in BSD_waitevent
> #2 0x905156dc in CarbonSelectThreadFunc
> #3 0x90020c28 in _pthread_body
>
> Thread 4:
> #0 0x9003e9a8 in semaphore_wait_signal_trap
> #1 0x9003e7c4 in _pthread_cond_wait
> #2 0x9051dbf0 in CarbonOperationThreadFunc
> #3 0x90020c28 in _pthread_body
>
> PPC Thread State:
> srr0: 0x00a15b8c srr1: 0x0200f030 vrsave: 0x00000000
> xer: 0x20000000 lr: 0x006d6770 ctr: 0x00defd50 mq:
0x00000000
> r0: 0x006d6770 r1: 0xbffff460 r2: 0x0104c000 r3:
0x00000000
> r4: 0x00000000 r5: 0x0000004d r6: 0x011e420a r7:
0x000000b0
> r8: 0x02befe88 r9: 0xa0220a00 r10: 0x0250e760 r11:
0xa0221738
> r12: 0x012e28b4 r13: 0x00000000 r14: 0x00000000 r15:
0x00000000
> r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19:
0x00000000
> r20: 0xbffffe18 r21: 0x00000001 r22: 0x012632a8 r23:
0x011e34bc
> r24: 0x00000001 r25: 0x00000001 r26: 0x011e41c0 r27:
0x02cf2d50
> r28: 0x02cf2d70 r29: 0x00000000 r30: 0x0286bdc0 r31:
0x00000000
>
>
> I think I know the cause of the program though. I was
trying to install
> some
> extensions using the extension manager. After I launched
Dreamweaver after
> installing the extensions, the problem started.
> I have the extensions that I was trying to install if
that would help.
> I would really like someone to help me with this
problem. Please tell me
> if
> you don't think this is the correct forum to post it in.
> Maybe it is Apple's fault.
> Thanks in advance.
> Jylan
>

Need Help with Dreamweave MX!

Hello all!
I'm an artist and I'm putting my new website together but I'm
stuck on something. I have 3 order forms that are all .doc files.
How do I make a link in Dreamweaver so when the person clicks on
the link... they download those forms? I did it once but it was a
long time ago and I forgot how. Don't talk to me like I'm some kind
of HTML expert. ;) I suck with HTML. If you can use simple easy
instructions I'd appreciate it. :) I'm not very experienced with
Dreamweaver.
Thanks! :)

Mahalo, Inali.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Inali Kealoha" <[email protected]> wrote in
message
news:ej5e0k$255$[email protected]..
> lol Teasing is fine. :) Sometimes it's *REALLY* hard to
tell online the
> person's meaning without the use of emoticons. Either
way, what Murray
> said
> worked great. It was so simple too and now I know how to
do it from now
> on.
> I've only used Dreamweaver once before and only because
the person who was
> to
> build my site was taking too long. I just decided I'd do
it myself. :)
>
> Now it is completed! Well, except for the fact that
while deleting my old
> version of the site I think I accidentally deleted my
entire coppermine
> gallery
> in the process. Oops. :( Oh well. Hopefully that can be
fixed without too
> much
> work. Thanks for the help! :)
>
> Inali
>
http://www.spiritcreations.wulfpawz.net/
>

Help with Dreamweaver flash image viewer

Hi all
Would like some help with Dreamweavers Flash image viewer.
Everything is working properly except when i try to link a picture, and have set the imagelinkTarget value to _blank the link always navigates away from my site and does not open in a new window.
I have tried all the values for the imageLinkTarget and nothing works..
Here is my code
<script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0, 28,0','width','190','height','190','src','images/ad1','quality','high','flashvar s','flashlet={imageLinkTarget:\'_blank\',captionFont:\'Verdana\',titleFont:\'Verdana\',sh owCo ntrols:false,frameShow:false,slideDelay:5,captionSize:14,captionColor:#000000,ti tleSize:10,transitionsType:\'Fade\',titleColor:#333333,slideAutoPlay:true,imageU RLs:[\'images/image1.jpg\',\'images/image2.jpg\',\'images/image3.jpg\',\'images/ image4.jpg\'],slideLoop:true,frameThickness:2,imageLinks:[\'http://www.bowlsaustralia.com.au\',\'http://www.smh.com.au\'],frameColor:#333333,bgColor:# FF9966,imageCaptions:[\'Bowls Australia\',\'Sydney Morning Herald\']}','pluginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash','flash_component','ImageViewer.swc','movie','images/ad1' ); //end AC code
</script><noscript><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0, 28,0" width="190" height="190">
          <param name="flash_component" value="ImageViewer.swc" />
          <param name="movie" value="images/ad1.swf" />
          <param name="quality" value="high" />
          <param name="FlashVars" value="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'Verd ana',showControls:false,frameShow:false,slideDelay:5,captionSize:14,captionColor :#000000,titleSize:10,transitionsType:'Fade',titleColor:#333333,slideAutoPlay:tr ue,imageURLs:['images/image1.jpg','images/image2.jpg','images/image3.jpg','image s/image4.jpg'],slideLoop:true,frameThickness:2,imageLinks:['http://www.bowlsaustralia.com.au','http://www.smh.com.au'],frameColor:#333333,bgColor:#FF9 966,imageCaptions:['Bowls Australia','Sydney Morning Herald']}" />
          <embed src="images/ad1.swf" quality="high" flashvars="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:' Verdana',showControls:false,frameShow:false,slideDelay:5,captionSize:14,captionC olor:#000000,titleSize:10,transitionsType:'Fade',titleColor:#333333,slideAutoPla y:true,imageURLs:['images/image1.jpg','images/image2.jpg','images/image3.jpg','i mages/image4.jpg'],slideLoop:true,frameThickness:2,imageLinks:['http://www.bowlsaustralia.com.au','http://www.smh.com.au'],frameColor:#333333,bgColor:#FF9 966,imageCaptions:['Bowls Australia','Sydney Morning Herald']}" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash" type="application/x-shockwave-flash" width="190" height="190"> </embed>
        </object>
</noscript>
any help would be greatly appericated
Ken

I just googled and found lots of folks with the same problem. One fellow wrote this as a soluton:
"All you have to do is
remove the values from the imageLinks in the flash element. That
should fix it."
Does it?
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia

Help with Dreamweaver centering website

Help please,
I have created my first website with Dreamweaver 8.02 and now
I need to center it into the center of the page. But I do not know
how. The web is 700wide x 500 high and the address is:
www.amandastraussdesigns.com Please help. I don’t know how to
fix this.
Thanks

Of course !!
"Sleep deprived" maybe :)
Nadia
Adobe® Community Expert : Dreamweaver
Tutorials |SEO |Templates
http://www.DreamweaverResources.com
http://www.perrelink.com.au
CSS Tutorials for Dreamweaver
http://www.adobe.com/devnet/dreamweaver/css.html
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
>> body {
>> text-align: left; /* I added this */
> -----------------^^^
>
> Should be text-align:center;
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> ": Nadia : **AdobeCommunityExpert**"
> <[email protected]> wrote
in message
> news:[email protected]...
>> You'll need to get into code view to fix this....
>>
>> Change the the body style you have now to:
>>
>> body {
>> text-align: left; /* I added this */
>> margin-left: 0px;
>> margin-top: 0px;
>> margin-right: 0px;
>> margin-bottom: 0px;
>> }
>>
>> Add a new div style just underneath the body styles:
>>
>> #outwrapper{
>> position: relative;
>> margin: auto auto;
>> width: 700px;
>> text-align:left;
>> }
>>
>> Then, just under this line:
>>
>> <body tracingsrc="image/colors.jpg"
tracingopacity="11">
>>
>> add
>>
>> <div id="outwrapper">
>>
>> just before this line (right at the bottom of the
code)
>>
>> </body>
>>
>> add this:
>>
>> </div> 
>>
>> so your last 3 lines look like this:
>>
>> </div>
>> </body>
>> </html>
>>
>>
>> Your page should now be centered horizontally.
>>
>> --
>> Nadia
>> Adobe® Community Expert : Dreamweaver
>> -------------------------------------------------
>> Tutorials |SEO |Templates
>>
http://www.DreamweaverResources.com
>> -------------------------------------------------
>>
http://www.perrelink.com.au
>> -------------------------------------------------
>> CSS Tutorials for Dreamweaver
>>
http://www.adobe.com/devnet/dreamweaver/css.html
>> -------------------------------------------------
>>
>>
>>
>> "demhs" <[email protected]> wrote
in message
>> news:[email protected]...
>>>
>>> Help please,
>>>
>>> I have created my first website with Dreamweaver
8.02 and now I need to
>>> center
>>> it into the center of the page. But I do not
know how. The web is
>>> 700wide x 500
>>> high and the address is:
www.amandastraussdesigns.com Please help. I
>>> don?t know
>>> how to fix this.
>>>
>>> Thanks
>>>
>>>
>>
>>
>
>

Help with Dreamweaver Validate Form Behavior

Hello,
I'm attempting to use Dreamweaver to validate form fields. This would work quite well except for in this case I'm using custom form code which is coming from Salesforce.com. The issue has been that the Salesforce.com web-to-lead form comes with "name" attributes on every form field item. If I change these names to make the validation look nicer, for example from first_name to First Name, then the web to lead form breaks. Is there another way to utilize Dreamweavers form validation by creating by own names for each form element instead of using "name"? The objective is to give the user something that looks good... like:
First Name is required
Last Name is required
And with the Salesforce custom name fields it ends up looking like:
900000xxxxx213s is required
or
last_name is required
Thanks for any help!

The name attribute of a form cannot contain spaces. That's why the validation behavior breaks.
The Dreamweaver Validate Form behavior is rather crude and well past its sell-by date. Use the Spry Validation widgets instead: http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WS267C8659-3AEF-4956-8268-E38CA4CAFAD3a .html.

I need help with Dreamweaver.

I had purchased Dreamweaver CS5-5 version 11.5 last year for my Mac X 10.8.3. Working on several web pages did just fine. I did not use Dreamweaver for the last 4 months. I do pro bono for four sites and they had not given me changes until yesterday - 05/07/13. So I opened Dreanweaver and loaded what I thought was the current pages to the web site I wanted to work on. Surprise!!! What uploaded on Weaver was old pages of the same site I did several years ago. The current pages were not there. They are current on the internet.
I have chased all over Adobe, the internet, reloaded Dreamweaver, tried to download from the internet the current pages through FTP to no avail. I find it extremely difficult to find someone at Adobe - a real person in the USA that speaks English - to help me out. I was shoved from one place to another. I finally got a real person in the last hour but he was from India. He wanted to take control of my computer. This was not to be done. I had PC's for 20 years. A Phillipino took over my PC in 2011 to correct some problems and froze my hard drive. The computer was trash after that. This is why I have a Mac.
All I want to do is to make some changes to the current web sites I am the web master for. I spent over $300.00 for Dreamweaver and it should not be doing this.
Any help would be appreciated.

Nancy O.
I am at a point that I thinking about dropping Dreamweaver. I feel that I should not go through all this.
I do not understand Dreamweaver as much as you do. Being that now I do not work with it frequently.
I just know it was simpler before.
On first using Dreamweaver I just downloaded it from the CD and went about my business. As stated this was up until four months ago.
For the amount paid for this software I should not have all of these problems. I should have bee able to do my work as before.
I am the type that needs everything written to understand what to do. In college I took tech writing. That taught me to explain everything in detail.
A lot of the software instructions could be better written. Just a rant on my part. (I find this in many assembly instructions)
I have not done your latest yet. I will try if I can understand what you suggest.
At this time I really don't want to do anything.
As stated - frustrated.
               +++++++
"The Constitution is not an instrument for the government to restrain the people,
it is an instrument for the people to restrain the government,
least it come to dominate our lives and interests."
Patrick Henry1736-1799
                   +++++++
        Non Sibi Sed Patriae
"Honor,Courage,Commitment"
                   ++++++
"I can imagine a no more rewarding career, and any man who may be asked
in this century what he did to make his life worthwhile,
I think can respond with a good deal of pride and satisfaction:
'I served in the United States Navy'
JFK
                 +++++++++
War is an ugly thing, but not the
ugliest of things. The decayed and
degraded state of moral and patriotic
feeling which thinks that nothing is
worth war is much worse.
The person who has nothing for
which he is willing to fight, nothing
which is more important than his own
personal safety, is a miserable
creature and has no chance of being
free unless made and kept so by
the exertions of better men than
himself.
John Stewart Mill
                ++++++++
Life is not a journey to the grave with
the intention of arriving safely in a
pretty and well preserved body, but
rather to skid in broadside,
thoroughly used up, totally worn out,
and loudly proclaiming
           -- WOW --
What a hell of a ride!
                   ++++++++
[email protected]

Need help with Dreamweaver 8

We are a church who uses AltoMP3 Gold, Macromedia Dreamweaver and GoDaddy.com to upload our sermons to our website as well as offer access to Itunes subscribers. We have used this system for years now and everything has worked great except for some problems with GoDaddy last year. However, we just discovered that Itunes subscribers cannot get any of our 2014 podcasts. The sermons can be accessed from our website, just not through Itunes. As far as I know, the coding has not been changed from the original design, except for the weekly updates as to name of MP3 file, dates, etc. Can you help me figure out why the access to sermons stopped for Itunes beginning in 2014? I am not a programmer, just a volunteer with limited knowldge. Thank you

Sounds like an iTunes issue. Have you checked iTunes support?
Nancy O.

Help with Dreamweaver CS5 spry menus. Menu is not dropping down in IE7.

Hello.
We recently upgraded from GoLive CS3 to Dreamweaver CS5. Wow! This has been a big change for us. We are having trouble with a website that we are building, specifically the Spry Menu drop downs not appearing correctly in IE7 and older. While the dropdown menu appears in other browsers, it is not dropping down at all in IE7 and earlier versions. After researching this topic on many websites, including this forum, we are still unable to resolve our particular issue. We have tried many of the suggestions that are common to our problem, but have not found a solution as yet. Could someone please check out this page for us, and possibly give us some advise. We are working on Mac OSX. Thank you in advance for any suggestions you may offer.
http://www.advertools.net/pgtdemo/index.html

When I added the following to the document
<style>
#main_image {position:static;}
</style>
the menu items appeared albeit in the wrong position.
The reason for the hidden menu items is because #main_image had a position of relative, effectively creating a flow of its own rather than following the natural flow of the document.
Now for the postion of the submenu. If I add the following style rules to the document the submenu items are in the correct position
ul.MenuBarHorizontal li {text-align: left;}
ul.MenuBarHorizontal a {text-align: center;}
In the first line I have reset the rule that you had changed to center align and in the second line (which is not in the original CSS) I have aligned the text in the anchor tag to align center.
The reason is that IE<8 behaves differently to other browsers when it comes to list items causing the nested list items (submenu) to align themselves to the center of the text of the parent list item.
I hope the above helps.
Gramps

Can anyone help with Dreamweaver CS6 crashing in Mavericks OS?

Hi all,
I've been going through all the discussions and performing all the steps that are in these forums about Dreamweaver crashing on launch, with no luck. I am using an iMac 2007, Mavericks OS and Dreamweaver is the only software in the Creative suite that will not launch.
I was on a live chat with Adobe and was told they would contact me from their technical support team and haven't heard a thing. Now I keep going through support trying to get a phone number, at this point I will pay to get it fixed.
Thanks for any help out there!

When you say you've tried "performing all the steps" have you completed all of the below?
Deleting the program cache: Deleting a corrupted cache file
Renaming the personal configuration folder: Locating your personal configuration folder
Restoring Preferences: Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6
Verifying Java SE7 is installed: Dreamweaver and Java SE 6 Runtime problem on MAC Mountain Lion OSX
Clean & Reinstall using the cleaner tool: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Need help with Dreamweaver CS3

Hi all,
I'm trying to insert a Flash animation and I get this error
message: Could
not create the Flash Animation because a component of
Dreamweaver is
missing. Please reinstall Dreamweaver.
I did reinstall Dreamweaver and I get the same message.
Thank you for the help
Louis

DW CS3
Vista Ultimate
I bought DW CS3 directly from Adobe online and I
réinslled it over without
removing it.
I have Flash 8 that came with the original Dreamweaver 8 that
I bought
online from Dreamweaver at the time.
I'm trying to insert a animated text from DW cs3.
Thank you
"poirot" <[email protected]> wrote in
message
news:fvi35m$8r0$[email protected]..
> What version of DW do you have?
> When you reinstalled did you uninstalled before?
> What is your OS?
> Did you do the installation as an administrator?
> Is this copy a demo or not?

Help with Dreamweaver Rollovers and Light Box ???

i am having trouble with lightbox and dreamweaver rollovers.
some are working and some are not,
see
http://www.opiesnowdesigns.com/EltonLeonard/gallery.html
(the last one in the second row, there are 3 in the third row and 2 in the last row)
i tried this but not all rollovers are working...
This is commonly caused by a conflict between scripts. Check your body tag and look for an onload attribute. Example:
<body onload="MM_preloadImages(‘/images/menu_on.gif’)…;">
A quick fix to this problem is to append the initLightbox() to the onload attribute as so:
<body onload="MM_preloadImages(‘/images/menu_on.gif’)…;initLightbox()">
is this a problem with the rollovers or the javascripts...
can any one help?
thank you
O

THANK YOU!!!!
you are AMAZING!
got them all working.
http://www.opiesnowdesigns.com/EltonLeonard/gallery.html
i really appreciate you taking the time to help me on this one.
i was at my wits end.
praising your tenacity!!!!!
and just to recap if someone else finds this helpful...
the reason the rollovers were not working was that there was a "space" and an ''apostrophe"
in the following
prob 1
onmouseover="MM_swapImage('Nature's Happiness','','images/portfolio/natureshappiness_tOn.jpg',1)"
name="Nature's Happiness"
id="Nature's Happiness"
prob2
onmouseover="MM_swapImage('Honey's Return','','images/portfolio/natureshappiness_tOn.jpg',1)"
name="Honey's Return"
id="Honey's Return"
PROBLEM CODE
<td><a href="images/portfolio/Nature'sHappiness.jpg" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Nature's Happiness','','images/portfolio/natureshappiness_tOn.jpg',1)" rel="lightbox[art]" title="Nature's Happiness"><img src="images/portfolio/natureshappiness_t.jpg" alt="Elton Leonard. Nature's Happinnes" name="Nature's Happiness" width="56" height="72" border="0" id="Nature's Happiness" /></a></td>
<td><a href="images/portfolio/Honey'sReturn.jpg" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('HoneysReturn','','images/portfolio/honeysreturn_tOn.jpg',1)" rel="lightbox[art]" title="Honey's Return"><img src="images/portfolio/honeysreturn_t.jpg" alt="Elton Leonard. Honey's Return" name="HoneysReturn" width="56" height="71" border="0" id="HoneysReturn" /></a></td>
CODE FIXED BY HANS (but with wrong name and tags)
<td><a href="images/portfolio/Nature'sHappiness.jpg" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Mom21','','images/portfolio/natureshappine ss_tOn.jpg',1)" rel="lightbox[art]" title="Mom"><img src="images/portfolio/natureshappiness_t.jpg" alt="Elton Leonard. Nature's Happinnes" name="Mom21" width="56" height="72" border="0" id="Mom21" /></a></td>
<td><a href="images/portfolio/Honey'sReturn.jpg" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Motivation24','','images/portfolio/honeysr eturn_tOn.jpg',1)" rel="lightbox[art]" title="Motivation"><img src="images/portfolio/honeysreturn_t.jpg" alt="Elton Leonard. Honey's Return" name="Honey's Return" width="55" height="73" border="0" id="Motivation24" /></a></td>
FINAL CORRECT CODES
<td><a href="images/portfolio/Nature'sHappiness.jpg" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('NaturesHappiness','','images/portfolio/natureshappiness_tOn.jp g',1)" rel="lightbox[art]" title="Nature's Happiness"><img src="images/portfolio/natureshappiness_t.jpg" alt="Elton Leonard. Nature's Happinnes" name="NaturesHappiness" width="56" height="72" border="0" id="NaturesHappiness" /></a></td>
<td><a href="images/portfolio/Honey'sReturn.jpg" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('HoneysReturn','','images/portfolio/honeysreturn_tOn.jpg',1)" rel="lightbox[art]" title="Honey's Return"><img src="images/portfolio/honeysreturn_t.jpg" alt="Elton Leonard. Honey's Return" name="HoneysReturn" width="56" height="71" border="0" id="HoneysReturn" /></a></td>

Help with Dreamweaver CS3 Free Trial

I am getting the following error from the website if I try to
go to the Adobe Dreamweaver CS3 free trial. Does anyone know how to
help me with this? Element TD_HEADER_LABEL_DREAMWEAVER is undefined
in a CFML structure referenced as part of an expression.

k_hudson04 wrote:
> I am getting the following error from the website if I
try to go to the Adobe
> Dreamweaver CS3 free trial. Does anyone know how to help
me with this? Element
> TD_HEADER_LABEL_DREAMWEAVER is undefined in a CFML
structure referenced as part
> of an expression.
It's an error on the Adobe server. It's been like that for a
couple of
days. I'm surprised it hasn't been fixed. I'll see if I can
contact
someone who can sort it out.
You should be aware, though, that the release of Dreamweaver
CS4 is
imminent, so the trial of CS3 might be withdrawn at any time.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Noob needs help with dreamweaver- problem encountered

madelinebeth.net
This is the website i am trying to create. It is not
complete, but on Safari it looks fine. When i open it on firefox,
it gets all messed up and i dont know how to change it. It
initially gets messed up on dreamweaver when i add links o
different slices. Any help would be greatly appreciated.

> is a bug in firefox that does not render correctly using
tables
Never heard of that. Are you sure?
>yes you can use photoshop, fireworks, etc. thats what
they are for
Could not disagree more. Image apps are for
creating/manipulating images.
Period. The HTML they spew is second-rate at best.
Walt
"Silkrooster" <[email protected]> wrote in
message
news:g0t18h$erv$[email protected]..
>A few things I see that need to be changed. your first
issue is tables,
>there
> is a bug in firefox that does not render correctly using
tables. I don't
> recall
> the bug and how it works, but the easiest way to
overcome the bug is to
> use css
> instead of tables.
> The other issue is to add a DTD at the top of your code,
this will stop
> the
> browsers especially IE from using the quirks mode.
> Other than that the code is fine. These problems can
easily be fixed in
> Dreamweaver. And yes you can use photoshop, fireworks,
etc. thats what
> they are
> for, as long as you know the bugs they may create. The
biggest being the
> DTD,
> next is the tables issue, which photoshop can use either
tables or css.
> Fireworks currently only supports tables, hopefully that
will get fixed in
> the
> next version.
> To make sure your code is correct from the get go, it is
best to
> use
> dreamweaver as it is aware of the DTD and can use css or
tables.
> I agree about the leopard skin, way too hard on the
eyes.
> Hope this helps
>

In desperate help with Dreamweaver Forms

I am looking to create a textfield within my form for viewers to enter a certain phrase or code to enable them to view my next page on my website. In other words, I am creating a simple game on dreamweaver were viewers have to enter a code within a textfield in order to view the next page once submitted. How can I tell dreamweaver what the word or code is for viewers to enter?? This code would have to be entered correctly, otherwise they would not be able to view the lext page (level 2). I have tried using spry validation but cannot seem to figure it out. Please if someone can help me i would be very grateful.

php will do this quiet easily if you can use it? A simple example of the code/form is below:
Copy code and paste into a new Dreamwaever document and save it as next_level.php The page sends the information collected via the form back to itself. If the person enters the correct code in this case 12345 they get taken to www.bbc.co.uk if they enter the wrong code they get a failure message. You can alter all of the above i.e., code and url to go to in the code below.
You can either use this locally if you have php set up or upload it to your server if it runs php.
<?php
if (array_key_exists('sumbit', $_POST)) {
$code = $_POST['code'];
if ($code == "12345") {
header('Location: http://www.bbc.co.uk');
else {
$responseMessage = "Sorry, the code you entered is incorrect!";
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
</head>
<body>
<form id="checkCode" name="checkCode" method="post" action="next_level.php">
<label>Code
<input type="text" name="code" id="code" />
</label>
<label>Submit
<input type="submit" name="sumbit" id="sumbit" value="Submit" />
</label>
</form>
<?php
if (isset($responseMessage)) {
echo $responseMessage;
?>
</body>
</html>

Help with Dreamweaver 3

Similar Messages

Maybe you are looking for