Help with Dreamweaver and appearance

I'm new at creating websites. I need control of where to
place stuff on the page so I'm using layers.
I need to know HOW to format my page so that when people
increase the font size on their browser, the whole page increases
proportionally and doesn't look wonky.

I think you must mean Lucille! Did they?
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> That would be "LUCY" please! And I think they both said
it. 8)
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
> ==================
>
>
> "Baxter" <baxter(RemoveThe :-)@gtlakes.com> wrote
in message
> news:[email protected]...
> >I thought Lucie said that???
> > "Murray *ACE*"
<[email protected]> wrote in message
> > news:[email protected]...
> >> > I'm new at creating websites. I need
control of where to place stuff
on
> >> > the
> >> > page so I'm using layers.
> >> > I need to know HOW to format my page so
that when people increase the
> > font
> >> > size on their browser, the whole page
increases proportionally and
> > doesn't
> >> > look
> >> > wonky.
> >>
> >> Simple. Don't use layers. Among many other
unexpected and unpleasant
> >> results, what you are asking to avoid is the
very consequence of
"needing
> >> control of where to place stuff on the page so
I'm using layers". In
> > fact,
> >> that's the very worst way to control where you
are placing stuff on the
> >> page.
> >>
> >> The best way to build your layout is to forget
that layers exist.
> > Instead,
> >> use the normal flow of the page to stack your
containers like building
> >> blocks, and then use CSS float, margin and
padding to get the
horizontal
> >> arrangement, and details of the vertical
spacing right. If this sounds
> > like
> >> a foreign language, it is. As Desi said
(paraphrased) "You got lots of
> >> learnin' to do"!
> >>
> >> Start here -
http://www.w3schools.com. The
more you know about HTML
and
> >> CSS, the less you need to know about DW.
> >>
> >>
> >> --
> >> Murray --- ICQ 71997575
> >> Adobe Community Expert
> >> (If you *MUST* email me, don't LAUGH when you
do so!)
> >> ==================
> >>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
> >>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
> >> ==================
> >>
> >>
> >> "natalinacarp"
<[email protected]> wrote in message
> >> news:[email protected]...
> >> > I'm new at creating websites. I need
control of where to place stuff
on
> >> > the
> >> > page so I'm using layers.
> >> > I need to know HOW to format my page so
that when people increase the
> > font
> >> > size on their browser, the whole page
increases proportionally and
> > doesn't
> >> > look
> >> > wonky.
> >> >
> >>
> >
> >
>

Similar Messages

Need help with Dreamweaver and ebay

I've been using Dreamweaver MX 2004 for my ebay templates. However, my images are hosted on a third party site, and I've always been pasting
http://www.domain.com/ in front of the pictures for the img src one by one.
I have a lot of listings to do and I'd like to eliminate that step, since the source url is always identical, only the picture name is different.
I've tried creating a site, but that only seems to work if the page is located in the same directory as the images.
(It would also be nice if I could see the pictures in the design view after they have been sourced / linked, the way I'm doing it now they are gray boxes for broken links since the src is not part of a site).
Is there anything I can do about this? I'm a fairly novice user if that isn't already evident.
Thanks!
-Ryan

Wow, it doesnt show up in mine either. Thats weird.
Anyway, to be as specific as possible, so you do not replace things in your website you are not intending to, I would Find as much of the back end code as possible relating to the images you wish to change. Provided that the image namse at the end of the URL match exactly.
Example:
If your tag looks something like this..
<img src="images/randompic.jpg" />
Do a code find for the entire site for..
<img src="images/
And replace with...
<img src="http://yoursite.com/
This will replace all images on every page (as long as you do a full site, source code search) that are pulled from the images folder. So say you do want to have some images uploaded that are your own not on the website. My suggestion would be to put those images in the images folder and create a different folder name (a unique one) for the images that will eventually be pulled from your website. (like: switch, something easily recognizable and unlikely to be used elsewhere)

Having trouble with Dreamweaver and fireworks willing to pay for support

I'm new to the forum and i was hoping to get some help with
dreamweaver and fireworks.
I built a site on my own using dreamweaver 3 years ago but
have forgotten almost everything. I am planning on building a new
web site and have been messing with dreamweaver for over a week
trying to figure it out, with little success. I bought a web
building package years ago that included fireworks, dreamweaver,
freehand and maybe more, but i lost my books on dreamweaver and
fireworks somehow.
Anyways, I was trying to learn dreamweaver 3 and fireworks
and was having a lot of trouble with it. The dreamweaver bible
assumes you know how to make a navigation bar using fireworks and
that simply isnt the case for me. So I need help with that.
Also, i have been having trouble with my template. This is
how you save your basic page correct? For some reason it doesnt
save the whole page for me. I figured out the editable regions
part, I think, but since i didnt know how to make a navigation bar
I made my own links out of text, and this part isnt saving with the
template.
I have a lot more questions but i think ive taken enough of
your time. I am willing to pay someone to help me build this site,
i cant afford a lot but i think my questions are pretty basic.
Thanks

There is a recent thread on the FW forum that may interest
you - it's called
"Firworks and HTML". The advice there applies in your case,
too.
One problem with your use of DW3 is this -
the browser world has changed quite a bit in the almost 10
years since DW3
was released. Some (many?) of the behaviors in DW3 simply
won't work any
more because of these (significant) changes. Are you
absolutely locked into
using DW3?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"jfmalewitz" <[email protected]> wrote in
message
news:[email protected]...
> I'm new to the forum and i was hoping to get some help
with dreamweaver
> and
> fireworks.
> I built a site on my own using dreamweaver 3 years ago
but have forgotten
> almost everything. I am planning on building a new web
site and have been
> messing with dreamweaver for over a week trying to
figure it out, with
> little
> success. I bought a web building package years ago that
included
> fireworks,
> dreamweaver, freehand and maybe more, but i lost my
books on dreamweaver
> and
> fireworks somehow.
> Anyways, I was trying to learn dreamweaver 3 and
fireworks and was having
> a
> lot of trouble with it. The dreamweaver bible assumes
you know how to make
> a
> navigation bar using fireworks and that simply isnt the
case for me. So I
> need
> help with that.
> Also, i have been having trouble with my template. This
is how you save
> your
> basic page correct? For some reason it doesnt save the
whole page for me.
> I
> figured out the editable regions part, I think, but
since i didnt know how
> to
> make a navigation bar I made my own links out of text,
and this part isnt
> saving with the template.
> I have a lot more questions but i think ive taken enough
of your time. I
> am
> willing to pay someone to help me build this site, i
cant afford a lot but
> i
> think my questions are pretty basic.
> Thanks
>

Problem with dreamweaver and Flash

Hi, maybe someone can help me, i have any problem with
dreamweaver and flash, i have a page and i have a menu and
sub-menu, and the same page i have a category en flash 550 x 700 (
photography and more... ) but when the menu to unfold
the menu to see under flash and it cant see ( sorry my
english is bad.... i hope you can understand me, and help me.. )
i dont now why always flash ever stay up, or first, and
another information under flash... this a problem... if you have
menus...
thanks.... have nice day.....

This is a drawback of using flash or any other active
content. By default, all active content including flash will
display over every other content and thats why your menu stays
under the flash movie. Some people make the flash background
transparent to show content under the flash movie, but that will
not work for menu items.
I would suggest that you make the menu such that it does not
overlap with the flash movie.

Help with writing and retrieving data from a table field with type "LCHR"

Hi Experts,
I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
Thanks in advance,
C
SAVING THE LIST DATA TO DB
DATA: L_WA(800).
LOOP AT T_TAB into L_WA.
ZDBTAB-DATALEN = STRLEN( L_WA ).
MOVE: L_WA to ZDBTAB-RAWDATA.
ZDBTAB-LINENUM = SY-TABIX.
INSERT ZDBTAB.
READING THE DATA FROM DB
DATA: BEGIN OF T_DATA,
             SEQNR type ZDBTAB-LINENUM,
             DATA type ZDBTAB-RAWDATA,
           END OF T_TAB.
Select the data.
SELECT linenum rawdata from ZDBTAB into table T_DATA
     WHERE repid = w_repname
     AND rundate = w_rundate
     ORDER BY linenum.
Populate calling Internal Table.
LOOP AT T-DATA.
APPEND T_DATA to T_TAB.
ENDLOOP.

Hi Anuj,
The unicode flag is active.
When I run our report and then to try and save the list data a dump is happening at the following point
LOOP AT T_TAB into L_WA.
As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
When I try to load a saved list the dump is happening at the following point
APPEND T_DATA-RAWDATA to T_TAB.
T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
Regards
C

Help with count and sum query

Hi I am using oracle 10g. Trying to aggregate duplicate count records. I have so far:
SELECT 'ST' LEDGER,
CASE
WHEN c.Category = 'E' THEN 'Headcount Exempt'
ELSE 'Headcount Non-Exempt'
END
ACCOUNTS,
CASE WHEN a.COMPANY = 'ZEE' THEN 'OH' ELSE 'NA' END MARKET,
'MARCH_12' AS PERIOD,
COUNT (a.empl_id) head_count
FROM essbase.employee_pubinfo a
LEFT OUTER JOIN MMS_DIST_COPY b
ON a.cost_ctr = TRIM (b.bu)
INNER JOIN MMS_GL_PAY_GROUPS c
ON a.pay_group = c.group_code
WHERE a.employee_status IN ('A', 'L', 'P', 'S')
AND FISCAL_YEAR = '2012'
AND FISCAL_MONTH = 'MARCH'
GROUP BY a.company,
b.district,
a.cost_ctr,
c.category,
a.fiscal_month,
a.fiscal_year;
which gives me same rows with different head_counts. I am trying to combine the same rows as a total (one record). Do I use a subquery?

Hi,
Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
user610131 wrote:
... which gives me same rows with different head_counts.If they have different head_counts, then the rows are not the same.
I am trying to combine the same rows as a total (one record). Do I use a subquery?Maybe. It's more likely that you need a different GROUP BY clause, since the GROUP BY clause determines how many rows of output there will be. I'll be able to say more after you post the sample data, results, and explanation.
You may want both a sub-query and a different GROUP BY clause. For example:
WITH    got_group_by_columns     AS
     SELECT a.empl_id
     ,     CASE
                    WHEN c.category = 'E'
              THEN 'Headcount Exempt'
                    ELSE 'Headcount Non-Exempt'
            END          AS accounts
     ,      CASE
                    WHEN a.company = 'ZEE'
                    THEN 'OH'
                    ELSE 'NA'
            END          AS market
     FROM              essbase.employee_pubinfo a
     LEFT OUTER JOIN mms_dist_copy             b ON   a.cost_ctr     = TRIM (b.bu)
     INNER JOIN       mms_gl_pay_groups        c ON   a.pay_group      = c.group_code
     WHERE     a.employee_status     IN ('A', 'L', 'P', 'S')
     AND        fiscal_year           = '2012'
     AND        fiscal_month          = 'MARCH'
SELECT    'ST'               AS ledger
,       accounts
,       market
,       'MARCH_12'          AS period
,       COUNT (empl_id)      AS head_count
FROM       got_group_by_columns
GROUP BY accounts
,            market
;But that's just a wild guess.
You said you wanted "Help with count and sum". I see the COUNT, but what do you want with SUM? No doubt this will be clearer after you post the sample data and results.
Edited by: Frank Kulash on Apr 4, 2012 5:31 PM

MOVED: [Athlon64] Need Help with X64 and Promise 20378

This topic has been moved to Operating Systems.
[Athlon64] Need Help with X64 and Promise 20378

I'm moving this the the Administration Forum. It seems more apporpiate there.

Help with Dreamweaver Rollovers and Light Box ???

i am having trouble with lightbox and dreamweaver rollovers.
some are working and some are not,
see
http://www.opiesnowdesigns.com/EltonLeonard/gallery.html
(the last one in the second row, there are 3 in the third row and 2 in the last row)
i tried this but not all rollovers are working...
This is commonly caused by a conflict between scripts. Check your body tag and look for an onload attribute. Example:
<body onload="MM_preloadImages(‘/images/menu_on.gif’)…;">
A quick fix to this problem is to append the initLightbox() to the onload attribute as so:
<body onload="MM_preloadImages(‘/images/menu_on.gif’)…;initLightbox()">
is this a problem with the rollovers or the javascripts...
can any one help?
thank you
O

THANK YOU!!!!
you are AMAZING!
got them all working.
http://www.opiesnowdesigns.com/EltonLeonard/gallery.html
i really appreciate you taking the time to help me on this one.
i was at my wits end.
praising your tenacity!!!!!
and just to recap if someone else finds this helpful...
the reason the rollovers were not working was that there was a "space" and an ''apostrophe"
in the following
prob 1
onmouseover="MM_swapImage('Nature's Happiness','','images/portfolio/natureshappiness_tOn.jpg',1)"
name="Nature's Happiness"
id="Nature's Happiness"
prob2
onmouseover="MM_swapImage('Honey's Return','','images/portfolio/natureshappiness_tOn.jpg',1)"
name="Honey's Return"
id="Honey's Return"
PROBLEM CODE
<td><a href="images/portfolio/Nature'sHappiness.jpg" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Nature's Happiness','','images/portfolio/natureshappiness_tOn.jpg',1)" rel="lightbox[art]" title="Nature's Happiness"><img src="images/portfolio/natureshappiness_t.jpg" alt="Elton Leonard. Nature's Happinnes" name="Nature's Happiness" width="56" height="72" border="0" id="Nature's Happiness" /></a></td>
<td><a href="images/portfolio/Honey'sReturn.jpg" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('HoneysReturn','','images/portfolio/honeysreturn_tOn.jpg',1)" rel="lightbox[art]" title="Honey's Return"><img src="images/portfolio/honeysreturn_t.jpg" alt="Elton Leonard. Honey's Return" name="HoneysReturn" width="56" height="71" border="0" id="HoneysReturn" /></a></td>
CODE FIXED BY HANS (but with wrong name and tags)
<td><a href="images/portfolio/Nature'sHappiness.jpg" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Mom21','','images/portfolio/natureshappine ss_tOn.jpg',1)" rel="lightbox[art]" title="Mom"><img src="images/portfolio/natureshappiness_t.jpg" alt="Elton Leonard. Nature's Happinnes" name="Mom21" width="56" height="72" border="0" id="Mom21" /></a></td>
<td><a href="images/portfolio/Honey'sReturn.jpg" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Motivation24','','images/portfolio/honeysr eturn_tOn.jpg',1)" rel="lightbox[art]" title="Motivation"><img src="images/portfolio/honeysreturn_t.jpg" alt="Elton Leonard. Honey's Return" name="Honey's Return" width="55" height="73" border="0" id="Motivation24" /></a></td>
FINAL CORRECT CODES
<td><a href="images/portfolio/Nature'sHappiness.jpg" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('NaturesHappiness','','images/portfolio/natureshappiness_tOn.jp g',1)" rel="lightbox[art]" title="Nature's Happiness"><img src="images/portfolio/natureshappiness_t.jpg" alt="Elton Leonard. Nature's Happinnes" name="NaturesHappiness" width="56" height="72" border="0" id="NaturesHappiness" /></a></td>
<td><a href="images/portfolio/Honey'sReturn.jpg" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('HoneysReturn','','images/portfolio/honeysreturn_tOn.jpg',1)" rel="lightbox[art]" title="Honey's Return"><img src="images/portfolio/honeysreturn_t.jpg" alt="Elton Leonard. Honey's Return" name="HoneysReturn" width="56" height="71" border="0" id="HoneysReturn" /></a></td>

How do I edit the CSS of a Dynamic Menu with Dreamweaver and Business Catalyst.

I've watched tutorials on v2 menu module and it obviously was not made for someone just starting out in Business Catalyst. I want to edit the CSS of my Dynamic Module, preferably V1, but if I have to use version 2 I will. The problem I am running into is that the width of the menu I am trying to make is not big enough. The menu is extremely simple, I could whip it up with css and html in a matter of minutes. Just black words horizontal layout with a dark red hover color and selected state. I can change all that in Business Catalyst Site Manager just fine, however, the width of my menu when I look at it on the site, is way too small. Probably only 750px wide. I want it 1000px wide, but I haven't the faintest idea of where to find that information to change. When I add the menu module to my html code i get this: {module_menu,1534789}. How do I add or find css/html to edit the properties? I know I can add classes to the items inside the menu in the Site Manager, but where do I find the html code that shows those names?
I'm obviously missing something important and probably really easy, so I hope someone can help.
Thanks, Evan Schmidt

I went ahead and built the navigation without a module, easier than wasting all this time trying to figure it out.
But initially my main problem was when I add the Menu module to my html in dreamweaver, this: {module_menu,1534789} would be put in my html instead of css/html code. Now if publish my site and look at the page source, it shows the css/html, but it doesn't in dreamweaver. So is that the only way to edit the css/html code, copy the page source and replace the {module_menu,1534789} with the copied code in dreamweaver?

Airplane help with Webhelp and HTML Help

Hi. We are generating 2 outputs using Robohelp v.6.0: HTML
Help and WebHelp. Standalone they both work fine. The context
sensitive .chm works too. Problems are:
1.) the primary help (Webhelp) does not appear - there isn't
any error msg either.
2.) when an invalid url is used the secondary help file does
appear (HTML help). But this doesn't happen with the correct url of
the primary help - Webhelp
Isn't there supposed to be a reference to the mapping in the
<head> of each htm file?
Can anyone help on this topic? many thanks!

First, move the styles from the form generator to the <head> of your document. Otherwise there is a possibility browsers could ignore the invalid code.
Then move your form div inside the banner div and set the attribute float:right; in your CSS for the form div. Then you should be good to go.

Help with CS4 and fireworks

Hey all, running out of time I am trying to set up a website for my sons baseball team this spring and I am in a little bit of a pickle. I am using DW CS4 and I have set up a slide show in fireworks CS4 as well, when I create the slideshow and test in a browser it works with no problem. Here is where the issue comes in to play, I create a sideshow using the the (player-black flash and when I import it into dreamweaver and set it up on my page I save the page and when I test I have no pictures show up. (I have included a screen shot) of what happens. I have tried different type of players and they all do the same thing. I have watched videos on how to import the slide show into dw and as far as I know that is not the problem. I have downloaded the most current version of adobe flash player but still no luck. And this is the one thing that everybody wants more than anything the pictures of games. Can anyone give me some help or suggestions, I have downloaded a software called visual sideshow, but I like the way fireworks looks and I plan on adding more slides as the year goes on. For what it is worth I have the copy of Adobe master collection CS4, but being new to web design and watching videos on fireworks it seem to be the easiest to learn. Can anyone give me some feed back on what I may be doing wrong. By the way I am using Win7 if that matters any
Thanks,

Fireworks is not the ideal solution for slideshows. Creating images, yes.
For a slideshow have a look hete http://forums.adobe.com/thread/1144742

I need help with Dreamweaver.

I had purchased Dreamweaver CS5-5 version 11.5 last year for my Mac X 10.8.3. Working on several web pages did just fine. I did not use Dreamweaver for the last 4 months. I do pro bono for four sites and they had not given me changes until yesterday - 05/07/13. So I opened Dreanweaver and loaded what I thought was the current pages to the web site I wanted to work on. Surprise!!! What uploaded on Weaver was old pages of the same site I did several years ago. The current pages were not there. They are current on the internet.
I have chased all over Adobe, the internet, reloaded Dreamweaver, tried to download from the internet the current pages through FTP to no avail. I find it extremely difficult to find someone at Adobe - a real person in the USA that speaks English - to help me out. I was shoved from one place to another. I finally got a real person in the last hour but he was from India. He wanted to take control of my computer. This was not to be done. I had PC's for 20 years. A Phillipino took over my PC in 2011 to correct some problems and froze my hard drive. The computer was trash after that. This is why I have a Mac.
All I want to do is to make some changes to the current web sites I am the web master for. I spent over $300.00 for Dreamweaver and it should not be doing this.
Any help would be appreciated.

Nancy O.
I am at a point that I thinking about dropping Dreamweaver. I feel that I should not go through all this.
I do not understand Dreamweaver as much as you do. Being that now I do not work with it frequently.
I just know it was simpler before.
On first using Dreamweaver I just downloaded it from the CD and went about my business. As stated this was up until four months ago.
For the amount paid for this software I should not have all of these problems. I should have bee able to do my work as before.
I am the type that needs everything written to understand what to do. In college I took tech writing. That taught me to explain everything in detail.
A lot of the software instructions could be better written. Just a rant on my part. (I find this in many assembly instructions)
I have not done your latest yet. I will try if I can understand what you suggest.
At this time I really don't want to do anything.
As stated - frustrated.
               +++++++
"The Constitution is not an instrument for the government to restrain the people,
it is an instrument for the people to restrain the government,
least it come to dominate our lives and interests."
Patrick Henry1736-1799
                   +++++++
        Non Sibi Sed Patriae
"Honor,Courage,Commitment"
                   ++++++
"I can imagine a no more rewarding career, and any man who may be asked
in this century what he did to make his life worthwhile,
I think can respond with a good deal of pride and satisfaction:
'I served in the United States Navy'
JFK
                 +++++++++
War is an ugly thing, but not the
ugliest of things. The decayed and
degraded state of moral and patriotic
feeling which thinks that nothing is
worth war is much worse.
The person who has nothing for
which he is willing to fight, nothing
which is more important than his own
personal safety, is a miserable
creature and has no chance of being
free unless made and kept so by
the exertions of better men than
himself.
John Stewart Mill
                ++++++++
Life is not a journey to the grave with
the intention of arriving safely in a
pretty and well preserved body, but
rather to skid in broadside,
thoroughly used up, totally worn out,
and loudly proclaiming
           -- WOW --
What a hell of a ride!
                   ++++++++
[email protected]

Need help with Dreamweaver 8

We are a church who uses AltoMP3 Gold, Macromedia Dreamweaver and GoDaddy.com to upload our sermons to our website as well as offer access to Itunes subscribers. We have used this system for years now and everything has worked great except for some problems with GoDaddy last year. However, we just discovered that Itunes subscribers cannot get any of our 2014 podcasts. The sermons can be accessed from our website, just not through Itunes. As far as I know, the coding has not been changed from the original design, except for the weekly updates as to name of MP3 file, dates, etc. Can you help me figure out why the access to sermons stopped for Itunes beginning in 2014? I am not a programmer, just a volunteer with limited knowldge. Thank you

Sounds like an iTunes issue. Have you checked iTunes support?
Nancy O.

Need help with slideshow widget appearing online

Hey out there a big thanks in advance for this.
I have slideshow widgets set up for my artwork and graphics pages on my website and they were working fine before the last Muse update. I then went into Muse to add more images to said slideshows and export and upload them just like normal. Everything went fine and then I finished uploading and viewed my site and the widgets did not appear...I also experienced some margin formatting difficulties but that is probably unrelated. I have not changed any permissions and have not changed anything besides adding in a few images only to one of the two slideshow widgets. I have completely deleted and re-exported and re-uploaded everything as in all of the files twice and still nothing. I really need some help with this one as soon as possible. Again a huge thank you. To see my site please go to www.joeldsiegel.com I have been using stablehost and the ftp client is CPanel if that is of any other help. Thanks again!!

Sorry, should've been more clear on that. Yes, the images
have been converted to movie clips, adn the linkage ID's are
img1-img8. The reasoning behind that is that, at some point, new
pictures will take the place of the current pictures.
The attempt at randomness is actually a leftover from a
previous incarnation of this project. Ideally I'd like the pictures
to always play through in the same order, but I'd like it to start
at a random place in that order so it's not always the same image
coming up when the page first comes up. So, basically, I left it in
for lack of a better idea.
As for the setInterval() and runTimer() and "Void" question,
that part is complete patchwork on my part. I'm not surprised that
I missed something or included something extra. There isn't any
code beyond what's attached in my previous post.
I think, at the time, I was hoping that the "if(timePassed
> nTimeout){" part was on the right track, but are you saying
that the void cancels that part out?

How to build database driven mobile apps with dreamweaver and phonegap?

Hi all,
I'm searching the easiest way to implement a simple database in my app.
I can build application with php/mysql in seconds with dreamweaver.
But how can I do something similar with dreamweaver cs5.5 and phonegap for mobile apps?
I would like to create a little app that pulls data from a mysql database on my webserver.
But it seems that dreamweaver/phonegap/jquery mobile work only with HTML files.
I searched the whole web for a day now but I haven't found anything easy to recreate.
Is there a tutorial that explains the basic of database for mobile in dreamweaver?
It seems a bit limitating to use dreamweaver to build only static/useless apps....
What about forms and data validation?
TIA for any help.
tony

@idesdema: Have a look at this tutorial: http://www.codeforest.net/jquery-mobile-advanced-tutorial-rss-reader-app
It includes a demo as well as a download link to the source files.
Also, if you want to take it a step further, you can create & manage a 'local database' without having to access anything remotely - basically handling everything at the client's end.
There's a tutorial for that here: http://the-jquerymobile-tutorial.org/jquery-mobile-tutorial-CH22.php
Good luck.

Help with Dreamweaver and appearance

Similar Messages

Maybe you are looking for