Help with dreamweaver CS3 install
I am trying to install CS3 on my laptop that does have 512mb
of ram, although it has intigrated graphics so it only reports
~480mb to windows. So i get the ram error while trying to install
the software. Is there any way to force the install??
dot45 wrote:
> if this is in the wrong forum, then please move it.
If you take a look at other posts, you'll find a lot of
queries about
installation problems with CS3, so you're not in the wrong
place, but
the lack of replies to your question suggests that nobody has
the answer.
The CS3 installer is very fussy (to put it mildly). It won't
install on
systems that don't match the minimum requirements. Even
though you have
512MB RAM, the system shows only 480, so you fall below the
threshold.
Unless you can find a way to get the machine to report the
full amount
of RAM, your only course of action seems to be to install
more RAM.
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/
Similar Messages
-
Trouble with Dreamweaver CS3 Install
Greetings all. I installed Dreamweaver CS3. After this, I had
a system problem (unrelated) to which I had to do a system restore
which went back to before Dreamweaver CS3 was installed.
I now want to install The Web Premium CS3, but the install
says I can't install Dreamweaver because of a conflict. There is no
uninstall (in control panel) for Dreamweaver CS3 and there are not
even any EXE files in it's folders (product of System Restore I am
guessing?)
How can I get this uninstalled so I can install the entire
package?
Thanks for the help!!What's the exact error message you're seeing? See if these
help:
Error "Installing Adobe Photoshop CS3 results in a conflict
with Adobe
Photoshop CS3" when you install Creative Suite 3 or Photoshop
CS3
http://www.adobe.com/go/kb401551
Remove Creative Suite 3 and CS3 point products from Windows
XP, Windows
Vista and Mac OS
http://www.adobe.com/go/kb401090
kb401090 points to a Clean Script that will remove files and
registry
entries if Add/Remove Programs isn't working.
David Alcala
Adobe Product Support -
Help with Dreamweaver CS3 Free Trial
I am getting the following error from the website if I try to
go to the Adobe Dreamweaver CS3 free trial. Does anyone know how to
help me with this? Element TD_HEADER_LABEL_DREAMWEAVER is undefined
in a CFML structure referenced as part of an expression.k_hudson04 wrote:
> I am getting the following error from the website if I
try to go to the Adobe
> Dreamweaver CS3 free trial. Does anyone know how to help
me with this? Element
> TD_HEADER_LABEL_DREAMWEAVER is undefined in a CFML
structure referenced as part
> of an expression.
It's an error on the Adobe server. It's been like that for a
couple of
days. I'm surprised it hasn't been fixed. I'll see if I can
contact
someone who can sort it out.
You should be aware, though, that the release of Dreamweaver
CS4 is
imminent, so the trial of CS3 might be withdrawn at any time.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/ -
Need help with Dreamweaver CS3
Hi all,
I'm trying to insert a Flash animation and I get this error
message: Could
not create the Flash Animation because a component of
Dreamweaver is
missing. Please reinstall Dreamweaver.
I did reinstall Dreamweaver and I get the same message.
Thank you for the help
LouisDW CS3
Vista Ultimate
I bought DW CS3 directly from Adobe online and I
réinslled it over without
removing it.
I have Flash 8 that came with the original Dreamweaver 8 that
I bought
online from Dreamweaver at the time.
I'm trying to insert a animated text from DW cs3.
Thank you
"poirot" <[email protected]> wrote in
message
news:fvi35m$8r0$[email protected]..
> What version of DW do you have?
> When you reinstalled did you uninstalled before?
> What is your OS?
> Did you do the installation as an administrator?
> Is this copy a demo or not? -
CVS / subversion with dreamweaver CS3
Hello,
I am working on a few projects that require code versioning
and I have been told by many people that CVS is the way to go.
Is there a way to integrate CVS with dreamweaver CS3?
Has dreamweaver CS3 native support for any repository system
type??
There are some free gpl plugin/add-on for CVS/ repository
support?
Thanks a lot"FMorales_at4" <[email protected]> wrote in
message
news:fgvcau$g2e$[email protected]..
> Hello,
>
> I am working on a few projects that require code
versioning and I have
> been
> told by many people that CVS is the way to go.
Some may say SubVersioN is the way to go, it's been
redesigned to address
some shortcomings in CVS
> Is there a way to integrate CVS with dreamweaver CS3?
http://www.grafxsoftware.com/product.php?id=22
> Has dreamweaver CS3 native support for any repository
system type??
Dreamweaver has native support for Microsoft Visual
SourceSaFe
Dreamweaver can use WebDAV repositories natively, and you can
use apache as
a WebDAV frontent for SubVersion.
> There are some free gpl plugin/add-on for CVS/
repository support?
http://sourceforge.net/projects/subweaver/
> Thanks a lot
Welcome -
Contribute CS4 with Dreamweaver CS3
I have a number of sites created with Dreamweaver CS3, and
intend to provide update access with Contribute - but Contribute
CS3 is now hard to get hold of. Will these sites work with
Contribute CS4 if developed with DW CS3: general functions such as
editable sections, checkin/checkout. I don't want to upgrade my
systems yet to CS4.
CS4 suite has much higher system requirement than CS3 - which
probably means a hardware upgrade first - so want to avoid this.
Can't find any info on this anywhere.
ThanksI just read on the adobe website that:
"Contribute CS4 works with Adobe Dreamweaver® CS4
templates"
Does that mean it wont work with Dreamweaver CS3 templates? -
Dreamweaver CS3 Install on Vista Home Prem
Hi there
I have just got a new laptop with Vista Home Premium
installed and I have attempted to install Dreamweaver CS3. The
first day it seemed to work fine until I got a message stating that
registration had failed catestrophically. It then shut down and I
was unable to run it since.
I have uninstalled the program, checked that all previous
installs had been unregistered and Installed again.
When I double click to run the application I get the little
circle icon that I guess replaces the egg timer in vista but then
after a second or two it disapears and nothing happens.
I have tried to uninstal, repair the installation but to no
avail. I even tried setting the clock to before the time change
last month as that caused an issue on the XP install on the old
computer but nothing seems to work - does anyone have any
ideas?????
I have had a look around the forums but not really came up
with anything.
Thanks in advanceThanks SnakEyez02 .
The Windows restore said that it failed the two times that I
tried it. But after doing this I tried Dreamweaver again and it
seems to be working. The registration has failed again however I am
able to use it. Hopefully one time it wil let the registration
complete.
Thanks for your help.
Brian -
I am rebuilding my system with XP SP3. Installed Photoshop
CS4. Now am trying to install Dreamweaver CS3 vrom DVD, and it
fails. Shared components go in fine, but that's all. I need to make
a custom installation to a different drive. That option is not
shown in the standard installation sequence.
Any help appreciated.What error(s) are you getting on the fail?
Depending on the issue you may want to check out Adobe's
support section here and submit a ticket. They will allow you to
upload files to them like the installer log to see what the problem
is. Just remember that it is a holiday weekend and the new year
weekend is right around the corner so there may be a delay with
their basic support response. -
Bypassing Firewall/Proxy Settings with Dreamweaver CS3
Hello,
The company that I work for has given us Dreamweaver CS3 and
it's great, however we have a problem with the companies firewall
blocking Dreamweaver from seeing external images when in "Design"
view. I have search throughout Google for a solution and have yet
to find one. I come here in the hopes that someone can help. Our IT
department has told me that the firewall solution they use does not
allow rule sets per application, so they cannot just say "allow
this program to use the web". This leaves me in a tough spot, but
they said in Dreamweaver CS3 has a way to setup a proxy and allow
it to bypass our firewall that would make this quick and easy. Does
DW have something like this, and if so then please point me in the
right direction!
I appreciate all assistance.
Regards,
JohnMaybe not per application but certainly by PC or IP adress.
Can they put
your IP adress in a rule less agressif.
aka Frenchy
"jljr222" <[email protected]> wrote in
message
news:gf1kqf$fjj$[email protected]..
> Hello,
>
> The company that I work has given us Dreamweaver CS3 and
it's great,
> however
> we have a problem with the companies firewall blocking
dreamweaver from
> seeing
> external images when in "Design" view. I have search
throughout Google
> for a
> solution and have yet to find one. I come in here in the
hopes that
> someone
> can help. Our IT department has told me that the
firewall solution they
> use
> does not allow rule sets per application, so they cannot
just say "allow
> this
> program to use the web". This leaves me in a tough spot,
but they said in
> Dreamweaver CS3 has a way to setup a proxy and allow it
to bypass our
> firewall
> that would make this quick and easy. Does DW have
something like this,
> and if
> so then please point me in the right direction!
>
> I appreciate all assistance.
>
> Regards,
> John
> -
Problem with Dreamweaver CS3 trial
I have just downloaded, the 30 day trial it ask where i would
like to install it to.... i press continue then it goes to 100%
then a error message
A problem occured whilst extracting some files. Check
available space on your computer and the write privileges on the
destination folder..
i have 75gb left and i'm doing it to my desktop so no
privileges needed
im on xp home edition>I run the ADBEDRWVCSE_WWE.EXE 292.289 KB
Where did you get this file?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"ABK54" <[email protected]> wrote in message
news:fojl9t$e10$[email protected]..
>I run the ADBEDRWVCSE_WWE.EXE 292.289 KB (for trial
version of Dreamweaver
>CS3)
> and after I have try to run the Setup.exe file.
> After 2 sec open a window - preparetion of Adobe
Dreamweaver CS3 -
> ,transer
> some files and open a window Loading setup... in 2 sec
close this window
> and
> after nothing!!!
>
> I need your help please
> tks
>
>
> sorry for the shuting
> -
I have a problem with Dreamweaver MX "unexpectedly quitting,"
every time I try to open the program. I am running Mac OS 10.2.8. I
have the console crash log for the program which I'll paste below.
quote:
Command: Dreamweaver MX
PID: 1201
Exception: EXC_BAD_ACCESS (0x0001)
Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00000004
Thread 0 Crashed:
#0 0x00a15b8c in 0xa15b8c
#1 0x006d6770 in 0x6d6770
#2 0x006d4b60 in 0x6d4b60
#3 0x00216894 in 0x216894
#4 0x00215ab0 in 0x215ab0
#5 0x00a25b94 in 0xa25b94
#6 0x00a25cec in 0xa25cec
#7 0x00a29924 in 0xa29924
#8 0x00a29750 in 0xa29750
Thread 1:
#0 0x90073ba8 in mach_msg_trap
#1 0x90005ed0 in mach_msg
#2 0xc0009190 in __ape_internal
#3 0xc0000efc in __ape_agent
#4 0x90020c28 in _pthread_body
Thread 2:
#0 0x90073ba8 in mach_msg_trap
#1 0x90005ed0 in mach_msg
#2 0x9022a720 in SwitchContexts
#3 0x90224fc8 in YieldToThread
#4 0x90243128 in SetThreadState
#5 0x9026d948 in SetThreadStateEndCritical
#6 0x009e7c28 in 0x9e7c28
#7 0x009e68e4 in 0x9e68e4
#8 0x009e67e0 in 0x9e67e0
#9 0x009e6bcc in 0x9e6bcc
#10 0x009e7f64 in 0x9e7f64
#11 0x9023bba8 in CooperativeThread
#12 0x90020c28 in _pthread_body
Thread 3:
#0 0x9000508c in syscall
#1 0x90515d0c in BSD_waitevent
#2 0x905156dc in CarbonSelectThreadFunc
#3 0x90020c28 in _pthread_body
Thread 4:
#0 0x9003e9a8 in semaphore_wait_signal_trap
#1 0x9003e7c4 in _pthread_cond_wait
#2 0x9051dbf0 in CarbonOperationThreadFunc
#3 0x90020c28 in _pthread_body
PPC Thread State:
srr0: 0x00a15b8c srr1: 0x0200f030 vrsave: 0x00000000
xer: 0x20000000 lr: 0x006d6770 ctr: 0x00defd50 mq:
0x00000000
r0: 0x006d6770 r1: 0xbffff460 r2: 0x0104c000 r3: 0x00000000
r4: 0x00000000 r5: 0x0000004d r6: 0x011e420a r7: 0x000000b0
r8: 0x02befe88 r9: 0xa0220a00 r10: 0x0250e760 r11:
0xa0221738
r12: 0x012e28b4 r13: 0x00000000 r14: 0x00000000 r15:
0x00000000
r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19:
0x00000000
r20: 0xbffffe18 r21: 0x00000001 r22: 0x012632a8 r23:
0x011e34bc
r24: 0x00000001 r25: 0x00000001 r26: 0x011e41c0 r27:
0x02cf2d50
r28: 0x02cf2d70 r29: 0x00000000 r30: 0x0286bdc0 r31:
0x00000000
I think I know the cause of the program though. I was trying
to install some extensions using the extension manager. After I
launched Dreamweaver after installing the extensions, the problem
started.
I have the extensions that I was trying to install if that
would help.
I would really like someone to help me with this problem.
Please tell me if you don't think this is the correct forum to post
it in.
Maybe it is Apple's fault.
Thanks in advance.
JylanHave you tried uninstalling that extension? Which one was it?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"jyilan" <[email protected]> wrote in
message
news:[email protected]...
>I have a problem with Dreamweaver MX "unexpectedly
quitting," every time I
>try
> to open the program. I am running Mac OS 10.2.8. I have
the console crash
> log
> for the program which I'll paste below.
>
>
quote:
> Command: Dreamweaver MX
> PID: 1201
>
> Exception: EXC_BAD_ACCESS (0x0001)
> Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00000004
>
> Thread 0 Crashed:
> #0 0x00a15b8c in 0xa15b8c
> #1 0x006d6770 in 0x6d6770
> #2 0x006d4b60 in 0x6d4b60
> #3 0x00216894 in 0x216894
> #4 0x00215ab0 in 0x215ab0
> #5 0x00a25b94 in 0xa25b94
> #6 0x00a25cec in 0xa25cec
> #7 0x00a29924 in 0xa29924
> #8 0x00a29750 in 0xa29750
>
> Thread 1:
> #0 0x90073ba8 in mach_msg_trap
> #1 0x90005ed0 in mach_msg
> #2 0xc0009190 in __ape_internal
> #3 0xc0000efc in __ape_agent
> #4 0x90020c28 in _pthread_body
>
> Thread 2:
> #0 0x90073ba8 in mach_msg_trap
> #1 0x90005ed0 in mach_msg
> #2 0x9022a720 in SwitchContexts
> #3 0x90224fc8 in YieldToThread
> #4 0x90243128 in SetThreadState
> #5 0x9026d948 in SetThreadStateEndCritical
> #6 0x009e7c28 in 0x9e7c28
> #7 0x009e68e4 in 0x9e68e4
> #8 0x009e67e0 in 0x9e67e0
> #9 0x009e6bcc in 0x9e6bcc
> #10 0x009e7f64 in 0x9e7f64
> #11 0x9023bba8 in CooperativeThread
> #12 0x90020c28 in _pthread_body
>
> Thread 3:
> #0 0x9000508c in syscall
> #1 0x90515d0c in BSD_waitevent
> #2 0x905156dc in CarbonSelectThreadFunc
> #3 0x90020c28 in _pthread_body
>
> Thread 4:
> #0 0x9003e9a8 in semaphore_wait_signal_trap
> #1 0x9003e7c4 in _pthread_cond_wait
> #2 0x9051dbf0 in CarbonOperationThreadFunc
> #3 0x90020c28 in _pthread_body
>
> PPC Thread State:
> srr0: 0x00a15b8c srr1: 0x0200f030 vrsave: 0x00000000
> xer: 0x20000000 lr: 0x006d6770 ctr: 0x00defd50 mq:
0x00000000
> r0: 0x006d6770 r1: 0xbffff460 r2: 0x0104c000 r3:
0x00000000
> r4: 0x00000000 r5: 0x0000004d r6: 0x011e420a r7:
0x000000b0
> r8: 0x02befe88 r9: 0xa0220a00 r10: 0x0250e760 r11:
0xa0221738
> r12: 0x012e28b4 r13: 0x00000000 r14: 0x00000000 r15:
0x00000000
> r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19:
0x00000000
> r20: 0xbffffe18 r21: 0x00000001 r22: 0x012632a8 r23:
0x011e34bc
> r24: 0x00000001 r25: 0x00000001 r26: 0x011e41c0 r27:
0x02cf2d50
> r28: 0x02cf2d70 r29: 0x00000000 r30: 0x0286bdc0 r31:
0x00000000
>
>
> I think I know the cause of the program though. I was
trying to install
> some
> extensions using the extension manager. After I launched
Dreamweaver after
> installing the extensions, the problem started.
> I have the extensions that I was trying to install if
that would help.
> I would really like someone to help me with this
problem. Please tell me
> if
> you don't think this is the correct forum to post it in.
> Maybe it is Apple's fault.
> Thanks in advance.
> Jylan
> -
Can't run updater 8.0.2 on Dreamweaver CS3 install
I have that FTP user name and password problem where it's
lost every time you re-start the program. Reading this forum I
found that I needed to use the updater 8.0.2. That downloaded fine
and when I tried to run it I got the following message:
The upgrade patch cannot be installed by the windows
installer service because the program to be upgraded may be
missing, or the upgrade patch may update a different version of the
program. Verify that the program to be upgraded exists on your
computer and that you have the correct upgrade patch.
I double checked I downloaded the English version of 8.0.2
and I have the English version
My disk is an upgrade disk which I've also had in the drive
during the update.
I tried totally uninstalling dreamweaver and then installing
and doing the update again.
Regardless I get this error, I also get the error with 8.0.1
updater
Any suggestions?Your subject line says you're trying to run this on DW CS3.
It's already
built in to CS3. The 8.02 updater was for DW 8.
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: Dreamweaver CS3: The Missing Manual,
DMX 2004: The Complete Reference, DMX 2004: A Beginner's
Guide
Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"derkdiggler" <[email protected]> wrote in
message
news:ffip5h$s3t$[email protected]..
>I have that FTP user name and password problem where it's
lost every time
>you
> re-start the program. Reading this forum I found that I
needed to use the
> updater 8.0.2. That downloaded fine and when I tried to
run it I got the
> following message:
>
> The upgrade patch cannot be installed by the windows
installer service
> because
> the program to be upgraded may be missing, or the
upgrade patch may update
> a
> different version of the program. Verify that the
program to be upgraded
> exists
> on your computer and that you have the correct upgrade
patch.
>
> I double checked I downloaded the English version of
8.0.2 and I have the
> English version
> My disk is an upgrade disk which I've also had in the
drive during the
> update.
> I tried totally uninstalling dreamweaver and then
installing and doing the
> update again.
>
> Regardless I get this error, I also get the error with
8.0.1 updater
>
> Any suggestions?
>
> -
Dang Frustrated with Dreamweaver CS3!
For the past 23 years I have taught myself all the computer
programs I use from Freehand, Photoshop, lllustrator, Indesign,
plus many others yet I rarely had to look up something in a book
and get the answer.
Not so with Dreamweaver!
I can't seem to get anywhere with this program. I have
learned much over the last 2 years I have been using it but I am
NOWHERE NEAR where I want to be. This has been the hardest program
there is for me to learn because of all this stupid code. Go ahead
call me a designer and not a programmer because it is true. I hate
code and after 2 years of this program I hate it even more. I just
want it to do what i want it to do and use visual commands only to
get there!
Can't they simplify the program for us stupid designer types?
I have several books on the program and even subscribe to
Lynda.com for their advice but even after going over the same
module 3 times I still don't have it right.
I just want to take a file from Photoshop CS3, slice it up
and bring it into Dreamweaver and HAVE IT WORK RIGHT! Something
always goes wrong and hours and hours of wasted time is spent in a
fruitless search for what happened in trying to fix it. I have
posts in other forums about this issue but no one has given me any
answers.
Can someone please tell me where to find this answer? The
issues is I just can't deal with those stupid white spaces that
show up when the text goes beyond the slice area from Photoshop.
Here is an example:
http://www.westshorecashloans.com/
Surely there is an answer out there! I have wasted over 3
weeks of work on this one issue and it still isn't solved.
Please, please, PLEASE someone help me find it!
Thanks
Kelly.oO(MountainMan)
>For the past 23 years I have taught myself all the
computer programs I use from
>Freehand, Photoshop, lllustrator, Indesign, plus many
others yet I rarely had
>to look up something in a book and get the answer.
>
> Not so with Dreamweaver!
>
> I can't seem to get anywhere with this program. I have
learned much over the
>last 2 years I have been using it but I am NOWHERE NEAR
where I want to be.
>This has been the hardest program there is for me to
learn because of all this
>stupid code. Go ahead call me a designer and not a
programmer because it is
>true. I hate code and after 2 years of this program I
hate it even more. I just
>want it to do what i want it to do and use visual
commands only to get there!
DW is neither a DTP nor a WYSIWYG program, even if many
people still
believe that. Without a solid understanding of what HTML and
CSS are
and how they work, you won't be able to do anything useful
with DW.
> Can't they simplify the program for us stupid designer
types?
Why should they? In fact there are other, much more simple
tools for the
"stupid designer types", where you can more or less click
together your
website. But the results are almost always beyond good and
evil. You get
what you pay for.
With every tool you first have to learn how to use it. If I
would go to
the next construction site and ask the guy if I could try the
pneumatic
hammer, what do you think would he say? He would either laugh
at me or
directly call the guys with these nice white jackets.
Same thing with DW. If you don't know how to properly use it,
you can't
do anything good with it, you'll just waste your time or even
shoot your
own foot. Why are there so many broken or even insecure
websites, which
are easy to hack and can be abused for a lot of bad things?
Because many
people don't really know what they are doing and try to make
the second
step before the first one.
> I have several books on the program and even subscribe
to Lynda.com for their
>advice but even after going over the same module 3 times
I still don't have it
>right.
>
> I just want to take a file from Photoshop CS3, slice it
up and bring it into
>Dreamweaver and HAVE IT WORK RIGHT!
Forget it. This will _never_ work right, simply because this
is not how
the web works. Your approach might work for PDFs or other
fixed size
image-based things, but never for a website. The web is
flexible.
> Can someone please tell me where to find this answer?
The answer is either to learn HTML and CSS first before even
thinking
about starting DW or to focus on your own skills and
capabilities as a
designer and ask someone else to turn them into a website.
Micha -
Getting Started with Dreamweaver CS3
I just purchased Dreamweaver CS3 online but have not yet
received it. I need to get a website up quickly but have never used
Dreamweaver. Can anyone point me to tutorials or other information
that I can review in advance? I tried to download a free trial of
dreamweaver 8 (CS3 not yet a available), assuming the
interface/functionality is similar, but can't find anything.
Any help that can get me quickly started is much
appreciated.I really want to emphasize this excellent suggestion from
Geoff. I know you
are anxious to get started, but make sure you do that with an
extreme bias
towards learning the underlying HTML and CSS. The more you
know about this,
the shallower your learning curve with DW will be.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"[email protected]" <[email protected]>
wrote in message
news:f0r4n1$38e$[email protected]..
> I'm assuming you have HTML coding skills, however? If
you don't understand
> the
> underlying coding behind building a site, how to do
basic site
> architecture,
> optimizing graphics and the like, you may have just
wasted some money. If
> you
> do know how to code, etc., then using DW will be pretty
intuitive for you.
> Just
> follow the introductory tutorials to get oriented then
start playing with
> it so
> its features become easy to use, almost second nature.
There are excellent
> books at Amazon for this, especially visual quick start
guides.
>
> Again, if you don't have the skills, I really recommend
finding a
> pre-built
> template through a site hosting provider that suits your
needs and your
> taste,
> then modifying only what's necessary such as the link
names, the content,
> and
> images.
>
> Not knowing what position you're coming from, but
assuming one without
> experience, I think you'll find you're in for a good
deal of work. Web
> sites --
> good ones -- aren't built overnight. It just isn't
plug-n-play (yet).
>
> Sorry. Not trying to put you down but just offering a
realistic answer.
> -
Is this possible With dreamweaver cs3
I am a photographer and for my future website I would really
like a feature where the viewer can click on the photo and it flips
over, and on the back I will have type/fonts explaining the photo.
I want to be able to add/edit the type when needed. I have never
designed a website but i am going to take classes to learn. Can
Dreamweaver CS3 do this or any other program? Any help would be
greatly appreciated.A simpler solution (no flipping) would be to use a photo
album generating
ware like JAlbum. It's free and you can add as many
comments/details as you
wish which will get picked up by the search engines. Many
skins read
digital info such as shutter speed, camera settings from your
camera. A
newer feature is GPS which provides maps to the location
shoot. JAlbum was
designed for photographers. It is very flexible with
customizable CSS and
skins. Best of all, it generates the thumbnail images and
html pages for
you so you don't have to. If you have many photos, this
software will save
you several hours of time. A+++
http://jalbum.net/
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"DMAGANA1" <[email protected]> wrote in
message
news:fq1ska$nn8$[email protected]..
> I am a photographer and for my future website I would
really like a
feature
> where the viewer can click on the photo and it flips
over, and on the back
I
> will have type/fonts explaining the photo. I want to be
able to add/edit
the
> type when needed. I have never designed a website but i
am going to take
> classes to learn. Can Dreamweaver CS3 do this or any
other program? Any
help
> would be greatly appreciated.
>
Maybe you are looking for
-
SAP paging overflow when storing data in the ABAP/4 memory.
I am trying to create a data source in BI7.0 in the Datawarehousing Workbench. But along the process when i need to select a view i get an error detailed in the following error file extract: Please go through and assist. untime Errors MEMORY
-
Unable to open project on different computer
Hi all, I've got an interesting situation. I created a project on a Mac Pro, then used FCPX to consolidate media onto an external drive. Then, I realized that the "Organize Media" was needed to get all original files correctly located in the FCPX m
-
Date&Time takes a long time to load
Hi I'm getting really frustrated, becasue everytime I want to look at the calander in the date and time utility, I try and open it and it takes AGES to open. Please help, what can I do to fix this???
-
Javascript function call from PL/SQL block
Hello, I am writing this pl/sql block that has checkbox and onselect, it calls javascript function. I defined javascript function in page header, even though I get error that says function is not defined. Please help. Thank you, H.
-
Not enough memory to complete the operation-how do i eliminate the error?
HI All, I have posted the questions before in this forum,but as i am not able to cure the problem i am posting it again. I have a large database oriented application to plot graph.Almost one year back given the application to the user. They were not