Help with Drivers for Ethernet Controller (on a T42)

When I go to my Device Manager .. i see this category called 'Other Devices' .. under which I see:
- ? Other Devices
--? Ethernet Controller
I can't seem to locate the right drivers for my T42.
I was able to find my PNP Device ID for this and it says:
PCI\VEN_168C&DEV_1014&SUBSYS_833117AB&REV_01\4&39A85202&0&10F0
Error Code: The drivers for this device are not installed
Can someone point me in the right direction for this driver ?
Thanks
EB

Your "other" Ethernet card is IBM (Atheros) a/b/g wireless card and here's the driver:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67214
After downloading it, make sure to unpack it from the following directory: C>Drivers>Win>Wlanath
And while I'm at it, here's your Bluetooth driver:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-50245
C>Drivers>Win>BDMC
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

Need help with drivers for Satellite A210-186

Hi,
I have a Satellite A210-186 and i can't find drivers for Windows XP. Can anybody tell me where to find drivers for XP?

Hi,
if you follow this [LINK|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU] you will reach the Drivers Download site. But I must warn you, , momentarly there except for Wireless and the Display no other drivers available. Either they will upload the other one or you will have to search for the remaining drivers in the internet (like LAN, flashmedia, etc..)
But I think they should update the section soon and make the drivers available for us..
Greets

Help with Drivers for HP dv8315nr for Windows Vista 64bit

Hi everyone! In 2007 i bought a laptop a HP Pavilion dv8315nr with the hope that the stickers in his keyboard saying "Vista Compatible" was true and the promise of that the AMD Turion processor can handle a 64bit OS. Today i realize that was not entirely true, because i got the Windows Vista ultimate for 64bits and the processor can handle this OS but i see that in the HP site don't provide any support for the drivers, so i get the problem that i don't have audio in my laptop and the modem adapter doesn't work either.
My question is can anybody help me with the audio driver for the HPdv8315nr for windows vista 64bit, that's my priority.
I appreciate the attention for this manner. Thank you
Jorge

I have the same problem with my Photosmart 7350's--I have two. I cannot get either to work with the New Mac Pro driver--Gutenprint .... I got the new drivers from Apple for HP but they fixed nothing. I even downloaded the newer drivers from HP, but their Printer Assistant does not seem to be working. I downloaded it twice. I can get a test page to print a few lines but the rest of the page is blank. When I try to print with either Pages or Word I get either nothing or trash.
My computer is the New Mac Pro 2.8 8-core with OS X 10.5.4.
These printers work with my Windows machine and I have read where they work with the Mac OS X. Can someone help. The link for printing trouble shooting did not help. My guess is the driver but I cannot get one do show up even after the HP download.
thank dr_lynch

Need Help With Drivers for 488ca

Hi I'm having nothing buy trouble I have a designjet 488ca and for the life of me can't down lode the soft ware they no longer make the CD and this thing is just keep going around with the same old crap I would be glad to pay for the CD if they just made It Thanks fore any help Oven

Hi,
if you follow this [LINK|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU] you will reach the Drivers Download site. But I must warn you, , momentarly there except for Wireless and the Display no other drivers available. Either they will upload the other one or you will have to search for the remaining drivers in the internet (like LAN, flashmedia, etc..)
But I think they should update the section soon and make the drivers available for us..
Greets

Need help with actionscript for media controller

I seem to be having a slight problem. I've been looking
around and everything I see is for .flv playback. Anyways, here's
my problem.
Client wants a video that's interactive. When a transition
occurs a simple tex button shows up which links to certain web
pages. Deploying this as a .swf would be no problem, but they want
a controlbar with it so a user can scrub back and forth in the
video. So the best way to do this would be progressive or
streaming.
I created a source file that utilizes the "loader component"
and inserted the "media controller component". I'm not very good
when it comes to actionscript and can't seem to find the proper
script which utilizes the media controller so the user can scrub
back and forth. Everything else seems to work fine with the loader
as it loads an external .swf file.
Just need to get the controller working properly. Total
frames of the swf is a little over 3,000 and dividing the total
frames by 30 was 107.7 seconds. So I round that to 108 seconds. The
online docs seem to be fragmented and not always consistant
especially when i'm not using the flvplayback or display.
Does anybody know the actionscript for this? Or where I can
find the information on this? I've associated the loader with the
controller and vice versa in the behaviors panel as well if that's
any help. Any help is much appreciated thanks.

Look, I hope you don't have false expectation that by knowing one piece of AS capabilities you will be able to accomplish your task.
If I say that the code for placing one MovieClip into another is:
clip1.addChild(clip2);
will it make any difference in terms of implementation?
Also, you say "select." This may mean a lot of thing: click, drag and drop, mouse down, etc. I am saying that implementation tightly depends of definitions that you give.
I don't know the extend of your AS skills, so it is not easy to figure where to start helping. Also, forum, perhaps, is not the medium where someone will write a lot of code for you. It is good for getting answers to very specific questions and solutions. This is when you have some code in place already.
What I would suggest is to start developing a very rough concept - no video, no birds, no numbers - just a static background image of the person you have in your first post. If you advance to an application that will allow user to select a square, place the square into another one - it will be a good start.

Need Help With Drivers For VF0250 Webcam Notebook Pro

I have looked everywhere online and can not find the drive files for the VF0250. Can some one help me. I do not have the disc and I have E-mailed Costumers support twice for it. Was wondering if anyone else could be of help. No other drivers work I have tried them.

Hi,
if you follow this [LINK|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU] you will reach the Drivers Download site. But I must warn you, , momentarly there except for Wireless and the Display no other drivers available. Either they will upload the other one or you will have to search for the remaining drivers in the internet (like LAN, flashmedia, etc..)
But I think they should update the section soon and make the drivers available for us..
Greets

Help with updates for CS6

I need help installing latest updates for CS6. I have Win 7 and have tried updating from the Help - Updates menu. The error is: U43M1D207.

Thanks for your response. I am in the United States in So. Arizona.
Date: Fri, 5 Oct 2012 12:21:45 -0600
From: [email protected]
To: [email protected]
Subject: Help with updates for CS6
Re: Help with updates for CS6 created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Crunkle1 you are welcome to work directly with our support team for guided assistance. If you go to http://www.adobe.com/ and select Help and Contact Us you should be given the option to contact our support team via telephone. Which country/region are you in?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4752605#4752605
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4752605#4752605
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4752605#4752605. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Help finding drivers for usb multimedia keyboard model ku-0841 for windows 7 64 bit

Help finding drivers for usb multimedia keyboard model ku-0841 for windows 7 64 bit.
the volume keys on keyboard work how ever the on screen thing that shows you the volume doesn't come up anymore it only shows when I use my mouse to control the volume.

is anyone out there who cna help me?

2000-412NR Notebook - need drivers for ethernet/networking/pci device

I have no drivers installed ethernet adapter, network adapter, or pci device (not sure what that is). I failed to locate the proper drivers on the hp web page, but I do have hardware ids for these devices:
ethernet adapter:
PCI\VEN_10EC&DEV_8136&SUBSYS_3577103C&REV_05
PCI\VEN_10EC&DEV_8136&SUBSYS_3577103C
PCI\VEN_10EC&DEV_8136&CC_020000
PCI\VEN_10EC&DEV_8136&CC_0200
network adapter:
PCI\VEN_1814&DEV_5390&SUBSYS_1636103C&REV_00
PCI\VEN_1814&DEV_5390&SUBSYS_1636103C
PCI\VEN_1814&DEV_5390&CC_028000
PCI\VEN_1814&DEV_5390&CC_0280
pci device (what is this?):
PCI\VEN_10EC&DEV_5209&SUBSYS_3577103C&REV_01
PCI\VEN_10EC&DEV_5209&SUBSYS_3577103C
PCI\VEN_10EC&DEV_5209&CC_FF0000
PCI\VEN_10EC&DEV_5209&CC_FF00
Please help me find these drivers! Thank you, in advance, for your time.

Hi @Lucky_S
Welcome to the HP Support Forums!
I understand that you are trying to find drivers for some of the devices on your notebook. I am happy to help you with this, but I need to know which operating system you are trying to find drivers for. Please post that information, and I will try to find what is available for you.
Is the Windows Version on My Computer 32-bit or 64-bit?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

WinXP drivers for Ethernet/SCSI combo card

Hello,
I have a combo Ethernet/SCSI card which I am using under Windows XP. While the SCSI part is detected and working under XP, the Ethernet Card is not.
I booted Linux to get a little more information about the device:
03:00.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01)
03:00.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal (rev 01)
03:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 04)
WinXP does not find any drivers for the PCI bridge and the Ethernet controller. Are there any drivers available anywhere?
Thanks for any help.

Instead of chasing for an unavailable driver (Sun doesn't supply a Windows driver for the hme), get an another Ethernet card.
Ethernet cards for PCs are inexpensive, these for SPARC systems are a lot more expensive.
Edit: I don't know why I initially suggested to get an Ethernet card that is on the HCL.
Michael

Noob needs help with drivers...

yeech, so yeah i decided to format my c drive, and surprise surprise, i wasnt quite prepared....
here's the deal, my wireless card works, as i got the drivers for it, but my onboard LAN doesnt, and i have no idea where to get the driver for that...any help is appreciated..
thanks!

Quote from: bejon2000 on 20-March-06, 16:53:45
budfroggy,
The Nvidia LAN is included with the NF3 motherboard driver:
I would rec 5.10, since there are some having LAN problems with the later 5.11.
http://www.nvidia.com/object/nforce_udp_winxp_archive.html
Here´s the Realtek GigaLAN driver (could be a bit difficult to find on the Download page, because it´s placed under "Archived"
http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=607&kind=1
Follow what bejon say and used driver 5.10.

Install problem with drivers for HP 1536 dnf-

I was reinstalling the printer drivers for the HP 1536 dnf and got this error code:
"Unable to add printer driver hpfax1, error code 87."
I have uninstalled and reinstalled the software 3 times now, including from a newly downloaded version on the HP site this morning. What can I do to fix this?
The reason I was reinstalling the software is I keep getting a message saying "hp toolboxfx has encountered an error and cannot recover" - anyone know how to fix that also? Reinstalling the software apparently did not fix this.

Hi smurrow,
Most likely this issue is because of the Admin Rights on the computer.
Set the Administrative rights and reinstall the printer software again.
Touch the Windows key + R key.
Type in CMD, then right click on CMD from the list and select run as administrator - opens command prompt window.
Type: net user administrator /active:yes.
You should see a message saying "the command completed successfully".
Log off and into the Admin account.
After this account is created, I would like you to perform a clean boot on the computer. This will prevent most third-party programs from interfering with the software installation, since some third-party programs can provoke this issue. Here is some information on how to perform a clean boot: Performing a Clean Boot in Windows
Then install the software on this account.
After troubleshooting is done, you can disable this account by typing the following command into Command Prompt (as administrator): net user administrator /active:no. Restart the computer.
If you are still having issue, have your company provide the Admin Rights to be able to fully install the printer software.
Hope this helps.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I need help with my for loop in this array

Ok well, I can't get my code to work. Also, please remember that this is just my draft so it isnt pretty. I will fix it up later so please look at it. The thing I want to do is look into the array for a time that matches what the user entered and return the toString() of that one. I know there is something wrong with my for loop but I cant figure how to fix it. please help. here is what i have so far:
import javax.swing.JOptionPane;
public class Runner
    public static void main (String[] args)
        String timeStr;
        int time, again, optiStr;
        Inbound[] in = new Inbound[25];
         in[0]=new Inbound ("",0,"On Time num0");
         in[1]=new Inbound ("",2,"On Time num1");
         in[2]=new Inbound ("",3,"Delayed num2");
         in[3]=new Inbound ("",4,"On Time");
         in[4]=new Inbound ("",5,"On Time");
         in[5]=new Inbound ("",6,"Canceled");
         in[6]=new Inbound ("",1,"Canceled num6");
         in[7]=new Inbound ("",8,"On Time");
         in[8]=new Inbound ("",9,"Delayed");
         in[9]=new Inbound ("",10,"On Time");
         in[10]=new Inbound ("",11,"Delayed");
         in[11]=new Inbound ("",12,"On Time");
         in[12]=new Inbound ("",13,"Delayed");
         in[13]=new Inbound ("",14,"On Time");
         in[14]=new Inbound ("",15,"On Time");
         in[15]=new Inbound ("",16,"On Time");
         in[16]=new Inbound ("",17,"Canceled");
         in[17]=new Inbound ("",18,"On Time");
         in[18]=new Inbound ("",19,"On Time");
         in[19]=new Inbound ("",20,"Canceled");
         in[20]=new Inbound ("",21,"On Time");
         in[21]=new Inbound ("",22,"Delayed");
         in[22]=new Inbound ("",23,"On Time");
         in[23]=new Inbound ("",24,"Cancled");
         in[24]=new Inbound ("",7,"On Time num24");
        do{
            timeStr = JOptionPane.showInputDialog ("In military time, what hour do you want?");
            time = Integer.parseInt(timeStr);
            if (time<=0 || time>24)
             JOptionPane.showMessageDialog (null, "Error");
             optiStr = JOptionPane.showConfirmDialog (null, "If you want Incoming flights click Yes, but if not click No");
            if (optiStr==JOptionPane.YES_OPTION)
//(ok this is the for loop i am talking about )
                for (int index = 0; index < in.length; index++)
                  if ( time == Inbound.getTime())
               JOptionPane.showMessageDialog (null, Inbound.tostring()); //return the time asked for
//               else JOptionPane.showMessageDialog (null, "else");
            }//temp return else if failed to find time asked for
//             else
//               if (optiStr==JOptionPane.CANCEL_OPTION)
//                 JOptionPane.showMessageDialog(null,"Canceled");
//              else
//                {Outbound.run();
//                JOptionPane.showMessageDialog (null, "outbound");}//temp
              again=JOptionPane.showConfirmDialog(null, "Try again?");
        while (again==JOptionPane.YES_OPTION);
}any help would be greatly appriciated.

rumble14 wrote:
Ok well, I can't get my code to work. Also, please remember that this is just my draft so it isnt pretty. I will fix it up later so please look at it. The thing I want to do is look into the array for a time that matches what the user entered and return the toString() of that one. I know there is something wrong with my for loop but I cant figure how to fix it. please help. here is what i have so far:
>//(ok this is the for loop i am talking about )
for (int index = 0; index < in.length; index++)
if ( time == Inbound.getTime())
JOptionPane.showMessageDialog (null, Inbound.tostring()); //return the time asked for
Inbound.getTime() is a static method of your Inbound class, that always returns the same value, I presume? As opposed to each of the 25 members of your array in, which have individual values?
Edited by: darb on Mar 26, 2008 11:12 AM

HOW DO YOU GUYS DEAL WITH APPLE.. SO CONFUSING...NEED HELP WITH SPECS FOR PURCHASE OF IMAC 21.5

Hi guys, been reading your forums, blogposts, etc and am getting more confused. I'm just a video girl trying to produce meaningful content through web videos for small to mid sized businesses and want to come over from the dark side.
Good news,, I dont need a super giant system, I do simple editing for web videos, minimal graphics, no motion graphics, no animation etc. currently using CS4, will probably end up with 5.5.
I want to get imac 21.5 or 27 if i have to.. So here's the question we all have,,, what do I really need besides an Apple fairy godmother to figure this crazy stuff out?????
I want to be able to have firewire add on, but the rest is what I need help with. So i've been looking at cs6 specs, even though im not there yet, eventually will be,, so just need to run cs4 now and build from there. I also want to eventually move to final cut down the road so I want imac able to upgrade to final cut.
WHAT DO I REALLY NEED MINIMALLY FOR NOW? WHAT CAN I GET LATER IF i CHOOSE TO DO MORE AND NEED MORE POWER?
cs6:
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8, v10.7, or v10.8**
4GB of RAM (8GB recommended)
4GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
Additional disk space required for preview files and other working files (10GB recommended)
1280x900 display
7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended)
OpenGL 2.0–capable system
DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certified GPU card for GPU-accelerated performance
Any responses would be great. I know you guys are busy answering the really high end tech questions

All the current iMac models (both 21.5" and 27" with OS X Mt. Lion 10.8) will run CS4, 5.5 and 6 just fine. They will also run Final Cut Pro X just fine. Ditto for most any application you may want to use.
Below are some notes (specific to your apparent requirements) that may help you with your purchase decision:
Notes on purchasing a 21.5" iMac
All 21.5" iMacs come with 8GB RAM but you cannot add more later. I strongly suggest getting the maximum RAM (16GB) when you order the iMac.
The basic hard drive is a 1TB 5400rpm drive. It will work fine with Adobe CS but you will probably want the added speed of the optional 1TB Fusion drive for better performance. Some people will recommend/argue for one of the optional SSD drives instead, but they are very expensive and still only come in relatively small capacities - I don't recommend the SSD drives. Get the Fusion drive and spend any extra money on a good external hard drive for backup and/or extra storage instead of an SSD.
Notes on purchasing a 27" iMac
All 27" iMacs come with 8GB RAM and you can add more later, up to 32GB
The basic hard drive is a 1TB 7200rpm drive - it will be fine with Adobe CS. There are upgrade options to a 3TB 7200rpm drive or a 1TB or 3TB fusion drive - these will be fine also. There are also SSD drive options, but I do not recommend them. (Same comments as above.)
Notes on all the current iMacs
iMacs no longer come with built-in CD/DVD drives. If you need one, you will need to purchase the Apple Superdrive accessory drive ($79)
All of the iMac graphic processors (GPU's) are compatible with Adobe CS 4, 5.5, 6
It is very difficult to impossible to change or upgrade the hard drive later on, so don't buy low-end thinking you can add a better internal hard drive later.
Be aware that Macs always come with the latest (most recent) version of OS X. And OS X Mavericks (10.9) is due to be released soon (in the next month or two). There is no guarantee that the older Adobe CS 4 or 5.5 versions will run on OS X Mavericks. If you cannot upgrade to CS 6 in the near future, you may want to purchase now rather than after OS X Mavericks is released.
For what it's worth, I'd recommend the 27" iMac if your budget can afford it. You will appreciate the larger screen size and added capabilities over the years you will use the computer.

Need Help with Javascript for Acrobat Pro 9

Hello,
I am creating a PDF form in Adobe Acrobat Profession 9. Not having a lot of experience with Javascript, I have found this forum very helpful and have used many of the script examples for other issues I have had. I was hoping someone could help with the following script, I have tried many variations, cannot get it to work.
var ratio = this.getField("ratio").value
var concentration = this.getField("concentration").value
var result = this.getField("result").value
if(ratio.value>=50.00)
{result.value ='PASS';}
if(ratio.value".value>=40.00)
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 49.25))
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 39.25))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 48.50))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 38.50))
{result.value ='PASS';}
else
{result.value = 'FAIL';}
This is just a piece of the code The concentration values run from 61 through 99 and the ratio value varies for each concentration value, there is a high ratio and a low ratio. The result of this field with populate the results field with a PASS or FAIL. This is not working......any help is greatly appreciated!

Thanks George. I updated the script to:
// Get a reference to the result field
var ratio = this.getField("ratio");
// Get a reference to the result field
var concentration = this.getField("concentration");
// Get a reference to the result field
var result = this.getField("result");
if(ratio.value>=50.00)
{result.value ='PASS';}
if(ratio.value >=40.00)
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 49.25))
{result.value ='PASS';}
if((concentration.value ==61) && (ratio.value >= 39.25))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 48.50))
{result.value ='PASS';}
if((concentration.value ==62) && (ratio.value >= 38.50))
{result.value ='PASS';}
else
{result.value = 'FAIL';}
However, I am still getting a FAIL result even when the ratio is 50.00 or equal to the passable ratio.

Help with Drivers for Ethernet Controller (on a T42)

Similar Messages

Maybe you are looking for