Help with drop in speed...

I used to get 6.4Mb/s regularly when I ran a speed test. Since a recent migration about 2 weeks ago I get maximum of 256k/s. I have run a test and it says my Configured Download Throughput Speed in 250k/s - Does this mean the maximum I can get with that setting is 250k/s? I have tried calling the "help" desk but they can't seem to understand the problem. If I transfered to another ISP would they be able to change this setting? Sorry if Im missing the obvious. Any help gratefully received.

What speedtest have you run? The bt one? What figures does that show, and what do you mean by 'migration'?

Similar Messages

Need help with drop down list in parameters

Hi All,
I have the following data set:
DEPT1     DEPT2     DEPT3 DEPT4
Commissioner's Office     Finance     Accounting     Accounts Payable
Commissioner's Office     Finance     Accounting     Fiscal Analysis & Repo
Commissioner's Office     Finance     Accounting
Commissioner's Office     Planning,Asset Mgt     Asset Management     Inventory & Tracking
Commissioner's Office     Planning,Asset Mgt     Asset Management     Mobility & Congestion
Commissioner's Office     Planning,Asset Mgt     Asset Management     Roadway Safety
Commissioner's Office     Planning,Asset Mgt     Asset Management
Commissioner's Office     DesignProj Mgt & Tec     Bridge Dsgn Insp Hyd
In plus i have four parameters with searchlight options, the problem is when i select "Finance" from DEPT2 and in the next selection level i'm seeing all the departments "Accounting,Asset Management and Bridge Dsgn Insp Hyd" insted of just "Accounting". What i want is if i select a department in DEPT2, in the next drop down list(DEPT3) i want to see only the departement corresponding to the one i selected in dept2. Please need help.
Thanks

Hi
First of all you need to be using Discoverer 10g or 11g Plus not 9.0.4. Assuming you have the right version you need to present the parameters in the correct order. You can change the order on the parameters screen by selecting Tools | Parameters from the toolbar. You then use the Move Up and Move Down buttons to place them in the right order so that DEPT1 is offered first, followed by DEPT2, then DEPT3 and then DEPT4.
Next, you need to check the radion button on the bottom of the right-hand side that allows linking of parameters then you make DEPT2 dependent upon DEPT1, with DEPT3 dependent upon DEPT2 and so on.
While this works without hierarchies it works best when you have a hierarchy in place and even better when there is a composite index on the 4 items.
Best wishes
Michael

Help with drop-in text animation

Hi Folks,
I'm trying to create a specific text animation, but I'm having a little difficulty. I'd like to have the text drop in in a random order into its final spot. I can get close using the text drop-in animation, but I'd really like the 'source' of the text dropping in to be from a single point. Picture a watering can pouring the letters out and they randomly fall into their correct spot in a phrase. The default look of the drop-in animation is that each character drops from its corresponding spot in the phrase. I've played with changing the tracking, using the 'before' setting and managed to squeeze the space that the text is dropping from, but that causes the letter to appear to move after they've already landed. You can see a rough draft here: http://www.c2-it.com/clients/a/textdrop.mov
Does anyone have any suggestions on how I can get closer to what I'm looking for?
Thanks,
CJ

Todd, thanks for the reference to the tutorials. They helped me understand a little more how the animators work.
Mylenium, I'm still a little confused on your approach. I've got the base text layer and added an animator for opacity. I set it for random and that works fine, the letters randomly appear and complete the phrase. For the 'pouring in' part, I added a second text layer and animated the position property, but the text still originates from its original place in the phrase. I can't get it to originate from a single point. Also, I'm not even sure I understood about using multiple selectors for the 1st layer. Just using the animator for opacity with a random setting seems to provide the correct 'ending' of the animation.
Thanks Again,
CJ

Help with drop create and update table

Sir/Madam,
I have joined 5 tables and selected some columns ,then I need to update some columns in that. After updating I need to create a report with the new column values.
To do this my method is to create temp table with the select statement then update the temp table , use this temp table for the report and then drop the temp table.
Is there anyother way to do this ??
Can I create a cursor and update the cursor column ??
Does dynamic sql always be created as procedure ??

Hi,
you need to understand how eventing works in BSP and MVC architecture. Pls refer to the below link for a basic understanding of how BSP works - View, Controller and Model class concepts.
http://www.sapdev.co.uk/webapps/bsp/washome.htm
For your requirement -
1. you need a view on which you will create a drop down list UI element and a table view element
2. you will need to create a contoller class - this will be used to handle the event that will be triggered when user selects an entry from drop down list
3. you will need a model class in which you will write the business logic to retrieve employees of selected department.
Pls search this forum or blogs for - data binding with BSPs, Table View. Pls read these concepts and try to develop your requirement. You can come back to this forum if you face any issues during development.
hope this helps.

I need help with drop down lists

I have a form that does not have lots of space and I want to use drop down lists to fill in specific information that describes site conditions. The problem I have is that the drop down list is only set up for a single line and that is not enough space for what I want in the drop down list. In other words, I have items that are several sentences. I have seen some descriptions of creating a drop down list that then fills in a text box that has multiple lines. Unfortunately, that is not an ideal solution for me. I just want the drop down list to select a single phrase. Here is an example of what I want to be able to select in the drop down.
The water heater spilled flue gases in excess of 5 minutes under worst case conditions. The combusiton testing was completed with in 30 days of the invoice submittal.
The form does not allow me to create a field that goes all the way across the page so it needs to look something like this:
The water heater spilled flue gases in excess of 5 minutes
under worst case conditions. The combusiton testing was
completed with in 30 days of the invoice submittal.
Any help is greatly appriciated.

Thanks for responding.
I have three items that are very similar in length and text for each drop down. There are 9 drop downs right now. I am using the drop downs to fill in a form that is used by several people and I want to keep things as simple as possible. Associated with the drop down already is a check box. When the check box is checked, it fills in a text box with a score (1 point, 5 points, etc). That score then tallys for a total with all the other scores in another text box. Using a drop box to fill in a text box is just getting to busy and than I have to distinguish each drop down item so it is clear which text you are selecting.

Help with drop down box if/then function and sum

Hi, I am hoping someone can help me with an if/then function. I have a drop down box with all of the provinces listed, then based on their choice I need to calculate provincial sales tax with a sum function for the price of the item plus the sales tax. Help!

You can enter the sales tax rate for each province as the export value and
then use the drop-down field directly in your calculations.
On Thu, Feb 5, 2015 at 6:06 PM, jennam90934439 <[email protected]>

Help - sudden drop in speed

was getting a constant average of 6 - 7mb download speed, had a day early last week which went up to 10mb? but now, for the last 3 days, i'm getting a max of 1mb?????
anybody else had a similar drop?
Ryan

sorry, you've lost me with the top right a - z?
speedtester results are
Test1 comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
1173 Kbps
0 Kbps
2000 Kbps
Max Achievable Speed
Download speedachieved during the test was - 1173 Kbps
For your connection, the acceptable range of speedsis 800-2000 Kbps.
Additional Information:
Your DSL Connection Rate :1540 Kbps(DOWN-STREAM), 202 Kbps(UP-STREAM)
IP Profile for your line is - 1250 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 8.2:27.11:64.69 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
2. Upstream Test: -provides background information.
Upload Speed
155 Kbps
0 Kbps
202 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 155 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 202 Kbps

Need help with drop down menu

Hi guys,
I'm using div's for the main navigation of my site and want to create a drop down for the first two buttons. All the tutorials I have seen have been for using unordered lists but I need to use divs for this navigation set (long story!).
Can anyone help me get them set up please? Ideally I would like the drop downs to fade in but it's not essential. I take it I need to create an absolutely positioned div where I want my drop downs to appear, is that correct? - but then where do I go from there?
If you click here for my test site.
Thank you very much and I hope to hear from you.
SM

Hi Ken,
Thank you for the reply.
I had the main nav as an unordered list to begin with but for some reason I didn't find them as easily controllable as the div's i.e. setting widths and heights etc. as I wanted each button to have a set width, instead of just having text with padding. Originally I had the button divides set as border left and right strokes but for some reason they weren't adding up, I think because of the padding I had on them. I know you can set these with unordered lists but opted for divs in the end!
Hope that helps.
Thanks again,
SM

Help with Drop Menus

I am designing a site that has multiple pages of images.
(Photographer website) I added a drop menu to keep the site
organized but I am now running into problems. Because of the
multiple pages, whenever she wants to upload pictures I have to
adjust the drop menu on like 15 pages. So I did the site over using
frames thinking this would help. But no. Now the frame cuts the
drop menu off.
So my question is. Is there a way to create a link or
javascript that I can link to on each page and then only edit that
one item. So when I go to that link/script and edit it, it will
just link to all other pages that contain that link/script. I don't
know if this is an easy fix, but I have just been pulling what
little hair out I have.
Thanks in advance.
Kevin

Investigate using DW's Library items, or Templates, or
ordinary Server-side
includes. It's the only way to do it.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Chester_22" <[email protected]> wrote in
message
news:f8cqap$gra$[email protected]..
>I am designing a site that has multiple pages of images.
(Photographer
>website)
> I added a drop menu to keep the site organized but I am
now running into
> problems. Because of the multiple pages, whenever she
wants to upload
> pictures
> I have to adjust the drop menu on like 15 pages. So I
did the site over
> using
> frames thinking this would help. But no. Now the frame
cuts the drop menu
> off.
>
> So my question is. Is there a way to create a link or
javascript that I
> can
> link to on each page and then only edit that one item.
So when I go to
> that
> link/script and edit it, it will just link to all other
pages that contain
> that
> link/script. I don't know if this is an easy fix, but I
have just been
> pulling
> what little hair out I have.
>
> Thanks in advance.
> Kevin
>

Will Extreme Help With Network Drive Speed ...

I was happy with my Snow Airport until I bought a ethernet based network attached storage. It takes forever to copy any big files and streaming a dvd file for watching is very choppy.
I am considering Extreme base station. Will you be able to stream a DVD file fast enough to watch? Anyone, Anyone?

You mention you have a Snow Airport. That model only has 802.11b - about 500-800K/s on a good, quiet network.
You talk about buying the new Extreme model. That will get 1,500 - 2,500K/s on a good, quiet network.
That will let you watch the DVD with 'less' choppyness, but it still won't be as good as reading straight from the DVD.
Typically if you care about watching DVDs, I'd suggest using a DVD ripper to turn it into a Quicktime / DIVX movie of some sort, which would then be small enough to easily view over even your Snow Airport BS's network (and would be great with the Airport Extreme BS).
I can't agree with any of the suggestions from the prior poster. The issue is unlikely to be RAM (assuming you have enough to run OS X and aren't running other tasks in the background) or NAS speed; your network speed is vastly faster than your wireless network speed, so I wouldn't even worry about that.

PREMIRE EL, 11. NEED HELP WITH DROPPING CLIP. SO FAR 3 1/2 HOURS. :(

i HAVE A LARGE VIDEO CLIP THAT IS IN VIDEO/AUDIO #2. I CAN NOT DRAG AND DROP IT INTO VIDEO/AUDIO #1 IN BETWEEN CLIPS. I HAVE TRIED EVERYTHING. PLEASE HELP ME. BARB

barbe1957
Without seeing your Timeline structure, I offer this thought for now. If you want to post a screenshot of the track situation, that would be helpful.
Why can you not drag and drop the large clip from Video/Audio 2 Video/Audio 1 - messes up the existing Timeline or just will not move or something else?
Select the group of clips that are now in the place where you want the Video/Audio 2 material to be. Then drag the selection as a group out of the way.
Drag in the Video/Audio 2 material to Video/Audio 1. Move the previously moved group back to wherever you want it.
What is the duration of this large Video/Audio 2 clip?
We will be watching for your follow up in the morning.
Thanks.
ATR
Add On...Typically as you hold down the Alt key of the computer main keyboard as you add a clip to an existing Timeline to avoid disturbing it.

Need help with my broadband speed

hi i have recently moved house and got broadband swapped 2 my new address and my broadband speed is really poor it is 104kps and my upstairs neighbour has the same hub and bt subscription and they have 4.454kps how can i get my speed up as i cannot play online games due to the poor speed here is my speed test results
Download speedachieved during the test was - 104 Kbps
For your connection, the acceptable range of speeds is 50-250 Kbps.
Additional Information:
Your DSL Connection Rate :7648 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 135 Kbps
please can sum1 help me and tell me if it is possible 2 get it faster many thxs

is this wat im needing 2 show u
Connection information<script type="text/javascript">// createTable("normal", trClass, td1, td2); // </script>
Line state
Connected
Connection time
0 days, 2:49:40
Downstream
7,648 Kbps
Upstream
448 Kbps
ADSL settings<script type="text/javascript">// createTable("normal", trClass, td3, td4); // </script>
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
14.6 dB / 25.0 dB
Line attenuation (Down/Up)
16.0 dB / 8.0 dB
Output power (Down/Up)
19.8 dBm / 12.4 dBm
Loss of Framing (Local)
105
Loss of Signal (Local)
51
Loss of Power (Local)
0
FEC Errors (Down/Up)
15 / 0
CRC Errors (Down/Up)
0 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
12107

Need help with Drop Down Menu _ URGENT!!

Hello -
I'm new to Dreamweaver. I actually have an old version
(Dreamweaver MX 2004).
I'm updating a website for work and this needs to be done as
soon as possible so I'd appreciate if anyone can be so kind as to
shed light on ANYTHING. =/
This is what I need:
I need a drop down menu; when a selection is chosen, I need
information regarding that selection to appear on the bottom of the
page. (I am working off an Excel sheet - it has list of service
descriptions along w/ the unit price, frequency & other fields.
So If I chose "database hosting" off the drop down list,
information would be generated (ie. it's corresponding unit price,
frequencies, etc.)
I've attached an example of a code but I cannot use that code
(which has JavaScript) to tweak what I need exactly.
I am VERY new to this so if anybody can help be out I would
GREATLY appreciate it.
Thanks!!

>I buy all their stuff as it
> is excellent.
Double Ditto!
Walt
"Paul Gillard" <[email protected]> wrote in
message
news:gedcoi$d65$[email protected]..
> Hi
> To be honest, the very best thing you can do is to get
hold of a DW
> extension
> from
http://www.projectseven.com
and then you will be able to have a
> completely
> editable 'easy to implement' drop-down menu system! I
buy all their stuff
> as it
> is excellent.
>
> Cheers
> Paul
>

Help with DROP ZONES!!

Hi. Firstly, sorry if I'm not able to explain myself in the proper terminology...very new to Pages and all.
Here is my query:
How do you create a Drop Zone (if that's what it's called)? i.e.The zones on the templates that enable you to drop a picture (any image) in them and they fill the shape entirely. So instead as using a solid colour as a fill, you'd use an image?
Thank you!!

pseudo,
Welcome to Apple discussions.
In Pages' parlance, it's called a Placeholder. Just insert an image, any image, into your Pages document. Select it. Click on Format > Advanced > Define As Media Placeholder. That's all there is to it.
-Dennis

Help with dropping out?

Is it possible for someone to start a presentation with a
quiz in it to stop half way through and then get back to the same
point?

Hi s394010
Indeed it is. There are a couple of ways you could accomplish
it.
1. If you are using Captivate in concert with a Learning
Management System (LMS) the LMS may support a function called
"Bookmarking". When Captivate is used with a LMS, it engages in a
conversation with the LMS. If your LMS supports bookmarking, it
will return the user to where they left off.
2. You might create or acquire a Flash "widget" that could be
used to capture and store the slide that was opened last. Then upon
opening the movie later, you are presented with a greeting that
allows returning to the last slide. One such widget is available on
the Captivate Exchange. I believe the author is asking $250 for the
widget. You may view the Exchange by
clicking
here.
Cheers... Rick

Help with drop in speed...

Similar Messages

Maybe you are looking for