Help with Dump files from other server.

Hello!
I'm having a problem with reading Dump files. The issue is this:
I'm working with a great number of SQL Servers installed in a big number of virtual/physical servers. The problem is that I can't analyse (neither with WinDg or Visual Studio) the .mdmp files out of the server that is having the issue.
Is there anyway that I could read the SQL Server dump files out of the server (It doesn't matter if it is in my Computer or another server)? Because it always shows an error of compatability with sqlservr.exe
Also is there any other tool that could help me to read sql server dump files?
Thank you very much :)

Hello,
I would suggest you raise a case with Microsoft for accurate analysis of the dump.I would strongly recommend it .If you still want to proceed use below link
http://blogs.msdn.com/b/psssql/archive/2012/03/15/intro-to-debugging-a-memory-dump.aspx
As a fact by applying latest service pack you have chance to subside these Dumps
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Similar Messages

  • I'm using iphone 4S, and I can not open PDF file only from my husband email that using Mic outlook. It was very weird because I can received other email with pdf file from other people. can someone help.

    I'm using iphone 4S and ipad mini, and I can not open PDF file only from my husband email that using Mic outlook. It was very weird because I can received other email with pdf file from other people. Can someone help...
    Thanks in advance

    Hi Eidda,
    This may because the attachment is a winmail.dat file. I would recommend taking a look at the article below for more information. Note: the article is written for OS X mail, but does also apply to this situation.
    Mac OS X Mail: What is a winmail.dat attachment?
    http://support.apple.com/kb/HT2614
    -Griff W.

  • [HELP] Send email with attachment  files from application server

    How can i send email to users with pdf/xls attachment files through job with pl/sql , but the files are on application server.
    I've tried using UTL_MAIL but it's not working, cause the file & DIRectory setting should be inside of database server. Should I copy the files from report server to database file system or any other techniques so there's no need to use the physical files?
    Please help!
    Thank you

    Hi,
    Thanks for your help, hoek & alvinder...
    I've tried the java send mail suggest by alvinder, and i got an error if i fill the Sender parameter with AutoMail :
    status:1 javax.mail.SendFailedException: Sending failed;
    nested exception is:
         javax.mail.MessagingException: 553 5.5.4 <AutoMail>... Domain name required
    Then i changed the Sender with valid email address :
    status:1 javax.mail.SendFailedException: Sending failed;
    nested exception is:
         javax.mail.MessagingException: 501 5.1.8 Domain of sender address [email protected] does not exist
    What could be wrong with this? Please help me... since i dont understand java programming :)
    I 'm still trying to find out
    Thank you very much

  • SSIS 2012 -Not Executing file from other server.

    Hi Experts , 
    I am working on SQL 2012
    I have a SSIS Package -
    1) Execute SQL Task - calling Storeprocedure 
    my StoreProcesdure contain OpenRowser Query which Pull Data from Excel and Load into SQL Table.
    Scenario 1 
    On Development Server example IP: (10.11.12.13)- File is present in D\ExcelSource\  folder of dev server
    1)My SP Run/execute successfuly on SSMS 
    2)MY SSIS package execute successfuly which contain above SP
    Scenario 2
    I have deployed SP and SSIS to production server
    On Production server example IP: (10.11.12.100)- File is Still Present in D\ExcelSource\  folder of dev server
    1) MY SP Execute successful on SSMS Picking file from '\\10.11.12.13\D\ExcelSource\' folder 
    2) SSIS Package Fails where SP is picking file from '\\10.11.12.13\D\ExcelSource\' folder
    "exec [dbo].[spLoadexcelEMPdata]" failed with the following error: "Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "(null)".". 
    Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
    3)When I copy excel file from dev to prod server and Give prod server path ,then SSIS package execute Successfully
    NOTE :
    a)ACE.OLEDB 64 bit (2010 )driver is installed on prod server
    b)Same SP execute successful  in Prod SSMS 
    c) SSIS and SP execute successful   in Dev server
    I have even Share development server Folder with everyOne so that File in it is accessible
    Also given Read Write  permission to excel file and folder 
    WHY my SSIS package with SP FAIL when Picking file from dev server ??? where as same SP runs fine on SSMS
    HOW to resolve this.... ?? Please assist

    You just gave more valuable info...
    exec [dbo].[spLoadexcelEMPdata] runs locally on the prod machine
    Thing is, you have the 64 bit driver, so it might work from the package or SSDT/VS if you set them to 64 Bit mode
    It is because the complete office is not necessary for OpenRowset.
    I assume, you referenced the driver
    OPENROWSET('Microsoft.ACE.OLEDB.12.0', 'Excel xyz.0;...
    Arthur
    MyBlog
    Twitter

  • Help with Moving Emails from Exchange Server 2013

    Hi Team,
    Help, I need a solution on how to copy incoming and outgoing emails together with their attachments and was hoping someone could help with a solution I need to find for this problem.
    1) I have a need to copy all incoming and outgoing emails & attachments from Exchange Server 2013 mailboxes on a daily basis, so they can be archived into an external 3rd party database overnight.
    I believe that the first step is that I can set up another Exchange mailbox, through Journaling to receive these emails. 
    Is there any way that these emails can then be moved direct from the Journaling mailbox that I have created, to a shared folder on the network? If so what format would they be sent out as e.g. .msg, .ems and what is the process?
    Failing that, could they be sent to an Outlook client (not another Exchange mailbox) on the network and stored in a .pst file? (I have a program that will export them from .pst)
    I would really appreciate any assistance that you can provide in this matter.
    Regards, Greg.

    Hi,
    You can set auto-forward on journaling mailbox and auto-forward emails to another mailbox. Why don’t directly archive the emails from the journaling mailbox “an external
    3rd party database”.
    Thanks,
    Simon Wu
    TechNet Community Support

  • 0x7_8 stop error caused by NTFS.SYS , please help with dump file analysis

    My 2003 server rebooted unexpected twice today and yesterday.
    I've run Windbg to analysis the dump file, but i really don't know what to do next to resolve my problem.
    Can any one give some suggestion? thanks in advance.
    Resetting default scope
    DEFAULT_BUCKET_ID:  DRIVER_FAULT
    PROCESS_NAME:  csrss.exe
    FAILURE_BUCKET_ID:  0x7f_8_Ntfs+5f74
    BUCKET_ID:  0x7f_8_Ntfs+5f74
    Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
    Copyright (c) Microsoft Corporation. All rights reserved.
    Loading Dump File [C:\temp\ads02 memory dump 20140218\MEMORY_20140217.DMP]
    Kernel Summary Dump File: Only kernel address space is available
    WARNING: Whitespace at end of path element
    Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols.sympath
    Executable search path is:
    Windows Server 2003 Kernel Version 3790 (Service Pack 2) MP (4 procs) Free x86 compatible
    Product: LanManNt, suite: TerminalServer SingleUserTS
    Built by: 3790.srv03_sp2_qfe.130703-1535
    Machine Name:
    Kernel base = 0x80800000 PsLoadedModuleList = 0x808a8ee8
    Debug session time: Mon Feb 17 08:37:34.653 2014 (UTC + 8:00)
    System Uptime: 1 days 2:57:43.093
    WARNING: Process directory table base BFF9C6C0 doesn't match CR3 005F2000
    WARNING: Unable to reset page directories
    Loading Kernel Symbols
    Loading User Symbols
    WARNING: Process directory table base BFF9C6C0 doesn't match CR3 005F2000
    Unable to get PEB pointer
    Loading unloaded module list
    *                        Bugcheck Analysis                                   
    Use !analyze -v to get detailed debugging information.
    BugCheck 7F, {8, 80042000, 0, 0}
    *** WARNING: Unable to verify timestamp for mssmbios.sys
    *** ERROR: Module load completed but symbols could not be loaded for mssmbios.sys
    *** WARNING: Unable to verify timestamp for Ntfs.sys
    *** ERROR: Module load completed but symbols could not be loaded for Ntfs.sys
    Unable to read selector for PCR for processor 1
    Unable to read selector for PCR for processor 2
    Unable to read selector for PCR for processor 3
    Unable to read selector for PCR for processor 1
    Unable to read selector for PCR for processor 2
    Unable to read selector for PCR for processor 3
    Probably caused by : Ntfs.sys ( Ntfs+5f74 )
    Followup: MachineOwner
    0: kd> !analyze -v
    *                        Bugcheck Analysis                                   
    UNEXPECTED_KERNEL_MODE_TRAP (7f)
    This means a trap occurred in kernel mode, and it's a trap of a kind
    that the kernel isn't allowed to have/catch (bound trap) or that
    is always instant death (double fault).  The first number in the
    bugcheck params is the number of the trap (8 = double fault, etc)
    Consult an Intel x86 family manual to learn more about what these
    traps are. Here is a *portion* of those codes:
    If kv shows a taskGate
            use .tss on the part before the colon, then kv.
    Else if kv shows a trapframe
            use .trap on that value
    Else
            .trap on the appropriate frame will show where the trap was taken
            (on x86, this will be the ebp that goes with the procedure KiTrap)
    Endif
    kb will then show the corrected stack.
    Arguments:
    Arg1: 00000008, EXCEPTION_DOUBLE_FAULT
    Arg2: 80042000
    Arg3: 00000000
    Arg4: 00000000
    Debugging Details:
    Unable to read selector for PCR for processor 1
    Unable to read selector for PCR for processor 2
    Unable to read selector for PCR for processor 3
    Unable to read selector for PCR for processor 1
    Unable to read selector for PCR for processor 2
    Unable to read selector for PCR for processor 3
    BUGCHECK_STR:  0x7f_8
    TSS:  00000028 -- (.tss 0x28)
    eax=00000000 ebx=8b4f1100 ecx=8ac87d03 edx=8687ddc0 esi=b83481a0 edi=b8348028
    eip=f7addf74 esp=b8348000 ebp=b8348014 iopl=0         nv up ei pl nz na po nc
    cs=0008  ss=0010  ds=0023  es=0023  fs=0030  gs=0000             efl=00010202
    Ntfs+0x5f74:
    f7addf74 0000            add     byte ptr [eax],al          ds:0023:00000000=??
    Resetting default scope
    DEFAULT_BUCKET_ID:  DRIVER_FAULT
    PROCESS_NAME:  csrss.exe
    CURRENT_IRQL:  1
    LAST_CONTROL_TRANSFER:  from 00000000 to f7addf74
    STACK_TEXT: 
    b8348014 00000000 00000000 00000000 00000000 Ntfs+0x5f74
    STACK_COMMAND:  .tss 0x28 ; kb
    FOLLOWUP_IP:
    Ntfs+5f74
    f7addf74 0000            add     byte ptr [eax],al
    SYMBOL_STACK_INDEX:  0
    SYMBOL_NAME:  Ntfs+5f74
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: Ntfs
    IMAGE_NAME:  Ntfs.sys
    DEBUG_FLR_IMAGE_TIMESTAMP:  0
    FAILURE_BUCKET_ID:  0x7f_8_Ntfs+5f74
    BUCKET_ID:  0x7f_8_Ntfs+5f74
    Followup: MachineOwner

    According to your post bug check 0x7F is recorded. Bug check 0x7F typically occurs after you install a faulty or mismatched hardware (especially memory) or if installed hardware fails.
    I suggest you check below link and troubleshoot it accordingly.
    Bug Check 0x7F 
    Regards, Ravikumar P

  • Problem with downloading file from FTP server

    Hello all
    I have uploaded a file from an application i developed and i want to download this file from another application. The code is
    public static void FTPcon() throws FtpException{
       String hostname = "my.ftp.server";
       String username = "myusername";
       String password = "mypass";
       Ftp ftp = new Ftp(hostname,username,password);
       ftp.setHostname(hostname);
            ftp.setUsername(username);
            ftp.setPassword(password);
            ftp.connect();
            ftp.setBinary();
            ftp.download("file.dat");
            ftp.disconnect();
    }The error i receive is java.io.FileNotFoundException: public.dat (The system cannot find the file specified) but the file is on the server.
    Thanks in advance for any help

    Cotton thank you for your reply
    Any other sugestions please?The server disagrees. So...
    - the file does not existThe file exists.I checked it with an FTP client program.
    - the file has a different nameThe file name is correct
    - you are connected to the wrong serverI am connecting to the correct server
    - you are in the wrong ftp directoryThe file is placed in the home directory
    - the ftp library you are using is broken (less
    likely)I am using the library from jscape.I dont think is broken because i can upload the file from the first application.
    >
    FTP isn't somehow broken in Java. I use it all the
    time. The problem is something listed above. I would
    check all of the first four if I were you because
    that's most likely where the problem is.Message was edited by:
    flightcaptain

  • Help with pulling files from PlayBook

    I have been trying for a while now to pull the files from my husbands PlayBook that has a corrupt OS per BB phone support. I had pretty much come to this conclusion but had to hear it from someone else before I decided this too. Well....per BB support someone, probably one of the kids, tried to do an update via WiFi and lost the signal while doing so which corrupted the OS. It needs to be repaired and doing so, as we all know, will dump the files/data on the PB. Really bad thing is my husband has NEVER....dont want to say I told you so.....synced the PB and there are videos and photos we can't lose on it. We would rather keep the PB as it is and buy another than repair the OS and lose the data. What I have found out is that the main means of communication for the PB are corrupt as well which doesn't allow us to connect to WiFi or BB Bridge. The PB will find my Storm 2 via bluetooth and I can tether it to the internet that way. I am now stuck! When it tethers and I pull up Google it automatically logs into my husbands Google account. I then try to click gmail and the bar gets halfway across the top and then stops. It does this most of the time. I have been successful in sending myself an empty email but when I try to email the photos and videos it says I can't attach the files because they are too big. Even 1 photo it states the file is too big? I also have a box.com account that I can't get logged into? I am guessing because it really needs to read the site as a mobile site and can't. I am hoping that I am really being too impatient and need to wait longer than 5 minutes for these sites to try and load because I am tethered through my phone? Any suggestions would be greatly appreciated. I was sure this was a lost cause but now that I can tether through my phone I am hoping there is hope......  

    I have tried the hard reboot on several occasions. I spent over an hour on the phone with BB support and they are the ones that told me the OS was corrupt. The PB is a 32 GB and has a ton of data on it (410 videos, 2595 pictures) but the strange thing is the readings I am getting. Total Storage 0 bytes and Free Storage 3.5 GB and then Total Memory 0 bytes and Free Memory 641.5 MB and Boot Time is blank with no reading at all (these readings seem backwards to me??). I have compared it to my PB which is working properly and I, of course, have a boot time. On other forums I have been told that these readings mean the PB is full and can't process data and to delete some of the files...well, it wont let me delete anything, not even 1 picture.
    I don't get an error message when trying to connect to WiFi. It just spins on the attempt 1 of 3 and never connects or tells me it has timed out. I have done every option I can to connect. I have even deleted the networks from my PB and taken the same steps with both and mine connects automatically like it should. I have tried connecting it to different computers and different networks.
    The reason for the assumption of a corrupt OS is that I can't get it to manually network map to any computer. I have tried with the PB network name and with the IP address of the PB. No computer will find it but taking the same steps with my working PB and everything connects as it should.
    Here is another funny thing. If the PB is connected via USB to my laptop and the BB Desktop Software is open eventually it will find the PIN number of the PB but it constantly pops up the error message that the PB is not connected, will not connect, and that it needs to be repaired BUT.....it will pull up the PB on the Desktop Manager but wont connect to the computer at all. When it does find the PIN number on the Desktop Software it does not allow me to click sync or anything because technically it is not connecting and reading data from what I can tell.
    The real question, I think, and I haven't had time to try, is can I add an app via App World if I can't open apps?

  • Need some help with sharing files from a Mac G3 to a Mac G4

    I've read through some of the forum comments here and checked with help, but still have a great deal of trouble understanding how to share files between two computers, especially when one has OSX 10.3.9 and the other has 9.2.2. I have these two computers connected with a router, but just can't seem to pass files from my G3 to my G4. All of the instructions I read are very confusing- subnet mask, IP address etc. Is there an area I can go to to get a better understanding? It seems like this shouldn't be very difficult. Is there an inherent problem because of the different systems? Thanks for any help I can get.
    Dick Skover

    I printed the article from Francine, and followed all of the steps and it just doesn't work. Actually, one of the first steps is to go to AppleTalk under the control panels and select "Connect via Ethernet" which I did, but got a "no zones available in that box and no options shown in that box. Is there a problem with the fact that I am connected through a router? Should I have a direct connection between computers without the router?
    I'm also reading the files sharing section of David Pogue's book on OSX The Missing Manual, but still can't get a handle on it. Any further help would be appreciated.
    Dick Skover

  • How to download a file from other server using servlet

    Hi All....
    Good Morning....
    right now,i am facing a problem..i am trying to download a file which is in other server..i tried somany ways and i couldnt succeed in this...
    will u pls give me solution for this..
    because it is very urgent for me...
    i am very much thankful if u provide me the code samples also....
    i am seeking ur help...
    Regards,
    sathya

    right now,i am facing a problem..i am trying to download a file which is in other server..i tried somany ways and i couldnt succeed in this...If you can tell some of our approaches and the failures you faced, someone might be able to help you.
    I dont think anyone will just give the code samples.

  • Need help with loading files from Sony cam!

    How can I import files from a Sony DCR-SR100 camera into FCP 6.0.1?
    Will it work with the Log&Transfer function?
    Camerainfo here:
    http://www.sony.no/view/ShowProduct.action?product=DCR-SR100E&site=odwnoNO&pageType=Overview&imageType=Main&category=SDHHard+DiskDrive

    FCP does not currently support HDD camcorders. For a more detailed explanation, check out this:
    http://discussions.apple.com/thread.jspa?messageID=4719805&#4719805
    The only solution I can think of that might (might) work is to import using iMovie 08, which claims to support certain HDD cams, and transfer into FCP.

  • Help with transferring files from Windows to MacBook Pro

    Just got a new MacBook Pro and need to transfer files from a very old Windows operating machine. Have the Seagate Slim portable drive.  I downloaded the online software to format it for the windows files (taking 4 hours).  Now, I'm told it will not work on the Apple product.  Has anyone used this and had success? Or is there an easier way?

    Hello CharliePaints,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Switch Basics: Migrate your Windows files to your Mac
    http://support.apple.com/kb/ht2518
    Transfer information from your PC over your wired or wireless network
    To move files using Migration Assistant to your Mac from your PC, use these steps.
    Have a nice day,
    Mario

  • Help with transferring files from mac to another hard drive...

    my mac wont let me transfer files from mac hard drive to a external hard drive, i've done it before, but suddenly it wont allow this? what could it be?

    Also Its my mums computer, i'm trying to fix it for her, she's running osx 10.10.2

  • Help Downloading a file from a server using FTP with only URL methods

    Hi All
    I have written this code and it is not working I dod not know why the download is not working please help is there anything that's missing?
    * Download the file
    public void download(String fileName, String destination)
           BufferedInputStream bis = null;
           BufferedOutputStream bos = null;
          // File destDir = null;
           try
               String urlString = "ftp://"+userName+":"+password+"@"+hostName+"/"+fileName;
               URL url = new URL(urlString);
               URLConnection conn = url.openConnection();
               conn.setDoOutput(true);
         conn.setDoInput(true);
               conn.connect();
           //set the destination directory
           File destDir = new File("U:\\2004\\"+fileName.trim());
            System.out.print("\n\n");
            System.out.print("Destination set to :" +destDir);
            System.out.print("\n\n");
              bis = new BufferedInputStream( conn.getInputStream() );
              bos = new BufferedOutputStream( new FileOutputStream(destDir.getName()));
              System.out.print("get file name :" +destDir.getName());
              System.out.print("\n\n");
              int i;
              while ((i = bis.read()) != -1)
                 bos.write( i );
              System.out.println("Trying to download...");
              bis.close();
              bos.close();
           catch (IOException ie)
         System.out.println( "Input not available" );
    This is what I get after runing this code.
    get umlcourse.txt U:\2004
    Destination set to :U:\2004\umlcourse.txt
    get file name :umlcourse.txtTrying to download...

    AceV wrote:
         String urlString = "ftp://"+userName+":"+password+"@"+hostName+"/"+fileName;
    You probably need to specify the transfer mode. For example:
    String url = "ftp://sam:spade@ftphost/myfile.txt;type=a";
    // Specify type=i for binary.

  • Help with selecting files from script menu or drag and drop

    I found this scale images applescript online. It works great when a bunch of files is dragged on top of the script but I would like it to also work when a folder or group of files is selected in the Finder and I activate it from the scripts menu.
    I can't get my on run statement to work. I'm not really an Applescript guy so I'm really just asking if someone can help finish what I started in this on run.
    -- save in Script Editor as Application
    -- drag files to its icon in Finder
    property target_width : 120
    property save_folder : ""
    on run
    tell application "Finder"
    activate
    set folder_path to quoted form of (POSIX path of (the selection as alias))
    set theItems to every file of folder_path
    end tell
    end run
    on open some_items
    -- do some set up
    tell application "Finder"
    -- get the target width, the default answer is the property target_width
    set new_width to text returned of ¬
    (display dialog "Target width:" default answer target_width ¬
    buttons {"OK"} default button "OK")
    if new_width as integer > 0 then
    set target_width to new_width
    end if
    -- if the save_folder property has not been set,
    -- set it to the folder containing the original image
    if save_folder is "" then
    set save_folder to ¬
    (container of file (item 1 of some_items) as string)
    end if
    -- get the folder to save the scaled images in,
    -- default folder is the property save_folder
    set temp_folder to ¬
    choose folder with prompt ¬
    "Save scaled images in:" default location alias save_folder
    set save_folder to temp_folder as string
    end tell
    -- loop through the images, scale them and save them
    repeat with this_item in some_items
    try
    rescaleand_save(thisitem)
    end try
    end repeat
    tell application "Image Events" to quit
    end open
    on rescaleand_save(thisitem)
    tell application "Finder"
    set new_item to save_folder & "scaled." & (name of this_item)
    end tell
    tell application "Image Events"
    launch
    -- open the image file
    set this_image to open this_item
    set typ to this_image's file type
    copy dimensions of this_image to {current_width, current_height}
    scale this_image by factor (target_width / current_width)
    save this_image in new_item as typ
    end tell
    end rescaleandsave

    When items are dragged to your script's icon they are passed in to the on open handler, so this triggers:
    on open some_items
    and the dragged items are passed in as some_items
    In contrast, when you double-click on the script, or invoke it via the Script menu, this runs the on run handler:
    on run
      tell application "Finder"
        activate
        folder_path to quoted form of (POSIX path of (the selection as alias))
        set theItems to every file of folder_path
      end tell
    end run
    However, there's nothing in this block that actually does anything with the selection - you (dangerously) assume that the selection is a folder (you really should check first), and just set theItems to every file in that folder then you exit.
    So to do what you want you'll need to edit your run handler to filter the selection and pass files over to the code that does the hard work.
    You already have the basis for this - your rescaleandsave() handler, so it's just a matter of identifying the files in the selection and passing those over to that handler:
    on run
      tell application "Finder"
        set cur_selection to (get selection) -- get the selection
        repeat with each_item in cur_selection -- iterate through
          if class of each_item is folder then -- do we have a folder?
            set theFiles to every file of each_item -- if so, get its contents
            repeat with each_file in theFiles -- iterate through them
              my rescaleand_save(eachfile) -- and process them
            end repeat
          else if class of each_item is document file then -- do we have a file selected?
            my rescaleand_save(eachitem) -- if so, process it
          end if
        end repeat
      end tell
    end run
    So the idea here is that the run handler gets the selection and works through the (potentially-numerous) items. For each selected item it checks whether its a folder or a file, if its a folder it gets all the files within and passes them to the rescaleandsave handler.
    Note that this is not recursive - it won't catch files within folders within folders - since it only looks at the top level of selected folders, but it wouldn't be hard to rework the script to handle that if that's what you need.

Maybe you are looking for