Help with DYNEX Model: DX-55L150A11 - 55" 120Hz LCD Television

Is there a Software Update available for this television?? I have trouble when I switch channels on the Cable box (TWC set top box). The sound disappears and the only way I can get it back is to cycle through the HDMI ports on the Dynex remote or turn off/on the Dynex remote. Seems like the Dynex TV loses sync for the AUDIO and it only "RESYNCS" when the HDMI ports are cycled. I cycle through the HDMI ports, because that is the method of connection between the Cable Set-top box and the TV.
Also, the 120 Hz operation is blurry during a football game. I need to shut off the 120 Hz processing and watch the raw video and it is not blurry. WHY???
Overall, the TV is operating okay, just wondering if a Software Update would help this TV????

There is currently no software update available for your TV. However, your sound problem is caused by a communication issue between your cable box & TV via the HDMI cable. An easy test is to plug in another source (like a DVD or game consol) to the same HDMI input, with the same cable, problem goes away, it's the cable box / provider issue. The TV does not know what is plugged in, it's just processing the information it receives. TWC boxes (likely Scientific American or Motorola built) have many problems with HDMI communication. The quickest, easiest, cheapest solution as suggested by cmartin is to switch to component cables. Your TV can process full resolution HD through the component inputs eliminating the troublesome HDMI communication line. Cmartin's other issue sounds like an overloaded cable system and his provider should be running additional lines if useage is overwhelming the bandwidth. HDMI has been troublesome since it's creation and with more products coming out of different countries with no communication standard, everything is 'talking a different language' and compounding the problem.
Regarding your 120hz question, using this function without a true 120hz (frames per second) input signal (currently only used by 3D primarily, and a few select BluRay and video games), the TV's processor takes available incoming frames and averages them together to create additional 'false frames' which are added in between (frame 1-2-3 becomes 1-1.5-2-2.5-3-3.5, etc.) often causing a choppy or blurring effect with normal video conditions. It's purpose and only real current benefit is under very fast moving video conditions when the gap between frames may be more evident.
-Agent M
www.facebook.com/geeksquadrecon
www.twitter.com/geeksquadrecon

Similar Messages

Help with logical model

Hi, I am new to this software and need some help with a simple logical model.
Here is the task:
I need to create a model for a parking garage.
Each level can have any number of lots.
There are different types of lots (handicapped, women, regular, ...) with different Prices and Sizes.
It is important for the users and the system to know whether a lot is free or occupied.
It is crucial to assign numbers to the lots, so users can find it again.
And this is my model:
Level 1:n Lot n:1 Type
(#Level) (#Number,*Availability) (#Type,*Price,*Size)
Question:
Is it correct or would you change something? I am not quite sure whether to make availability and level an entity or an attribute of Lot.
Which data types do I need to assign each attribute? What is the difference between logical and domain?
Thanks in advance
Edited by: user13256814 on Jun 2, 2010 3:51 AM

Hi Bhaskaran,
u can see the logs correspoding to your application in the server location..
\usr\sap\<sid>\<instance_number>\j2ee\cluster\server0\
i think ur application folder will be there inside this or within one subdirectory here.
http://help.sap.com/saphelp_nw04s/helpdata/en/fe/4f5542253fb330e10000000a155106/content.htm
U can check the service entries in services file which is located in
<Drive Name>:\WINDOWS\system32\drivers\etc...
but normally in JCO Connection test , if it is not showing errors(especially MetaData) , then it means this entry is there in the services file.
Regards
Kishor Gopinathan

Help with SQL MODEL Clause

I have the privilege of performing a very tedious task.
We have some home grown regular expressions in our company. I now need to expand these regular expressions.
Samples:
a = 0-3
b = Null, 0, 1
Expression: Meaning
1:5: 1,2,3,4,5
1a: 10, 11, 12, 13
1b: 1, 10, 11
1[2,3]ab: 120, 1200, 1201, ....
It get's even more inetersting because there is a possibility of 1[2,3]a.ab
I have created two base queries to aid me in my quest. I am using the SQL MODEL clause to solve this problem. I pretty confident that I should be able to convert evrything into a range and the use one of the MODEL clause listed below.
My only confusion is how do I INCREMENT dynamically. The INCREMENT seems to be a constant in both a FOR and ITERATE statement. I need to figure a way to increment with .01, .1, etc.
Any help will be greatly appreciated.
CODE:
Reference:          http://www.sqlsnippets.com/en/topic-11663.html
Objective:          Expand a range with ITERATE
WITH t AS
(SELECT '2:4' pt
FROM DUAL
UNION ALL
SELECT '6:9' pt
FROM DUAL)
SELECT pt AS code_expression
-- , KEY
-- , min_key
-- , max_key
, m_1 AS code
FROM t
MODEL
PARTITION BY (pt)
DIMENSION BY ( 0 AS KEY )
MEASURES (
                    0 AS m_1,
                    TO_NUMBER(SUBSTR(pt, 1, INSTR(pt, ':') - 1)) AS min_key,
                    TO_NUMBER(SUBSTR(pt, INSTR(pt, ':') + 1)) AS max_key
RULES
-- UPSERT
ITERATE (100000) UNTIL ( ITERATION_NUMBER = max_key[0] - min_key[0] )
m_1[ITERATION_NUMBER] = min_key[0] + ITERATION_NUMBER
ORDER BY pt, m_1
Explanation:
Line numbers are based on the assupmtion that "WITH t AS" starts at line 5.
If you need detailed information regarding the MODEL clause please refer to
the Refrence site stated above or read some documentation.
Partition-
Line 18:     PARTITION BY (pt)
               This will make sure that each "KEY" will start at 0 for each value of pt.
Dimension-
Line 19:     DIMENSION BY ( 0 AS KEY )
               This is necessary for the refrences max_key[0], and min_key[0] to work.
Measures-
Line 21:      0 AS m_1
               A space holder for new values.
Line 22:     TO_NUMBER(SUBSTR(pt, 1, INSTR(pt, ':') - 1)) AS min_key
               The result is '1' for '1:5'.
Line 23:     TO_NUMBER(SUBSTR(pt, INSTR(pt, ':') + 1)) AS max_key
               The result is '5' for '1:5'.
Rules-
Line 26:     UPSERT
               This makes it possible for new rows to be created.
Line 27:     ITERATE (100000) UNTIL ( ITERATION_NUMBER = max_key[0] - min_key[0] )
               This reads ITERATE 100000 times or UNTIL the ITERATION_NUMBER = max_key[0] - min_key[0]
               which would be 4 for '1:5', but since the ITERATION_NUMBER starts at 0, whatever follows
               is repaeted 5 times.
Line 29:     m_1[ITERATION_NUMBER] = min_key[0] + ITERATION_NUMBER
               m_1[ITERATION_NUMBER] means m_1[Value of Dimension KEY].
               Thus for each row of KEY the m_1 is min_key[0] + ITERATION_NUMBER.
Reference:          http://www.sqlsnippets.com/en/topic-11663.html
Objective:          Expand a range using FOR
WITH t AS
(SELECT '2:4' pt
FROM DUAL
UNION ALL
SELECT '6:9' pt
FROM DUAL)
, base AS
SELECT pt AS code_expression
, KEY AS code
, min_key
, max_key
     , my_increment
, m_1
FROM t
MODEL
PARTITION BY (pt)
DIMENSION BY ( CAST(0 AS NUMBER) AS KEY )
MEASURES (
                    CAST(NULL AS CHAR) AS m_1,
                    TO_NUMBER(SUBSTR(pt, 1, INSTR(pt, ':') - 1)) AS min_key,
                    TO_NUMBER(SUBSTR(pt, INSTR(pt, ':') + 1)) AS max_key,
                    .1 AS my_increment
RULES
-- UPSERT
          m_1[FOR KEY FROM min_key[0] TO max_key[0] INCREMENT 1] = 'Y'
ORDER BY pt, KEY, m_1
SELECT code_expression, code
FROM base
WHERE m_1 = 'Y'
Explanation:
Line numbers are based on the assupmtion that "WITH t AS" starts at line 5.
If you need detailed information regarding the MODEL clause please refer to
the Refrence site stated above or read some documentation.
Partition-
Line 21:     PARTITION BY (pt)
               This will make sure that each "KEY" will start at 0 for each value of pt.
Dimension-
Line 22:     DIMENSION BY ( 0 AS KEY )
               This is necessary for the refrences max_key[0], and min_key[0] to work.
Measures-
Line 24:      CAST(NULL AS CHAR) AS m_1
               A space holder for results.
Line 25:     TO_NUMBER(SUBSTR(pt, 1, INSTR(pt, ':') - 1)) AS min_key
               The result is '1' for '1:5'.
Line 26:     TO_NUMBER(SUBSTR(pt, INSTR(pt, ':') + 1)) AS max_key
               The result is '5' for '1:5'.
Line 27:     .1 AS my_increment
               The INCREMENT I would like to use.
Rules-
Line 30:     UPSERT
               This makes it possible for new rows to be created.
               However seems like it is not necessary.
Line 32:     m_1[FOR KEY FROM min_key[0] TO max_key[0] INCREMENT 1] = 'Y'
               Where the KE value is between min_key[0] and max_key[0] set the value of m_1 to 'Y'
*/

Of course, you can accomplish the same thing without MODEL using an Integer Series Generator like this.
create table t ( min_val number, max_val number, increment_size number );
insert into t values ( 2, 3, 0.1 );
insert into t values ( 1.02, 1.08, 0.02 );
commit;
create table integer_table as
select rownum - 1 as n from all_objects where rownum <= 100 ;
select
min_val ,
increment_size ,
min_val + (increment_size * n) as val
from t, integer_table
where
n between 0 and ((max_val - min_val)/increment_size)
order by 3
   MIN_VAL INCREMENT_SIZE        VAL
      1.02            .02       1.02
      1.02            .02       1.04
      1.02            .02       1.06
      1.02            .02       1.08
         2             .1          2
         2             .1        2.1
         2             .1        2.2
         2             .1        2.3
         2             .1        2.4
         2             .1        2.5
         2             .1        2.6
         2             .1        2.7
         2             .1        2.8
         2             .1        2.9
         2             .1          3
15 rows selected.--
Joe Fuda
http://www.sqlsnippets.com/

Need help with Data Model for Private Messaging

Sad to say, but it looks like I just really screwed up the design of my Private Messaging (PM) module... *sigh*
What looked good on paper doesn't seem to be practical in application.
I am hoping some of you Oracle gurus can help me come up with a better design!!
Here is my current design...
member -||-----0<- private_msg_recipient ->0------||- private_msg
MEMBER table
- id
- email
- username
- first_name
PRIVATE_MSG_RECIPIENT table
- id
- member_id_to
- message_id
- flag
- created_on
- updated_on
- read_on
- deleted_on
- purged_on
PRIVATE_MSG table
- id
- member_id_from
- subject
- body
- flag
- sent_on
- updated_on
- sender_deleted_on
- sender_purged_on
***Short explanation of how the application currently works...
- Sender creates a PM and sends it to a Recipient.
- The PM appears in the Sender's "Sent" folder in my website
- The PM also appears in the Recipient's "Incoming" folder.
- If the Recipient deletes the PM, I set "deleted_on" and my code moves the PM from Recipient's "Inbox" to the "Trash" folder. (Record doesn't actually move!)
- If the Recipient "permanently deletes" the PM from his/her "Trash", I set "purged_on" and my code removes the PM from the Recipient's Message Center. (Record still in database!)
- If the Sender deletes the PM, I set "sender_deleted_on" and my code moves the PM from the Sender's "Sent" folder to the "Trash" folder. (Record doesn't actually move!)
- If the Recipient "permanently deletes" the PM from his/her "Trash", I set "sender_purged_on" and my code removes the PM from the Sender's Message Center. (Record still in database!)
Here are my problems...
1.) I can't store PM's forever.
2.) Because of my design, the Sender really owns the PM, and if I add code to REMOVE the PM from the database once it has a "sender_purged_on" value, then that would in essence remove the PM from the Recipient's Inbox as well!!
In order to remove a PM from the database, I would have to make sure that *both* the Recipient has "purged_on" value and the Sender has a "sender_purged_on" value. (Lot's of Application Logic for something which should be simple?!)
I am wondering if I need to change my Data Model to something that allows my autonomy when it comes to the Sender and/or the Recipient deleting the PM for good...
One the other hand, I believe I did a good job or normalizing the data. And my current Data Model is the most efficient when it comes to saving storage space and not having dups.
Maybe I do indeed just need need to write application logic - or a cron job - which checks to make sure that *both* the Sender an Recipient have deleted the PM before it actually flushes it out of my database to free up space?!
Of course, if one party sits on their PM's forever, then I can never clear things out of my database to free up space...
What should I do??
Some expert advice would be welcome!!
Sincerely,
Debbie

rp0428,
I think I am starting to see my evil ways and where I went wrong...
> Unfortunately his design is just as denormalized as yours
I see that now. My bad!!
> the last two columns have NOTHING to do with the message itself so do NOT belong in a normalized table.
> And his design:
>
> Same comment - those last two columns also have NOTHING to do with the message itself.
Right.
> The message table should just have columns directly related to the message. It is a list of unique messages: no more, no less.
Right.
> Mark gave you hints to the proper normalized design using an INTERSECT table.
> that table might list: sender, recipient, sender_delete_flag, recipient_delete_flag.
> As mark suggested you could also have one or two DATEs related to when the delete flags were set. I would just make the columns DATE fields.
>
> Once both date columns have a value you can delete the message (or delete all messages older than 30+ days).
>
> When both flags are set you can delete the message itself that references the sender and the message sent.
Okay, how does this revised design look...
MEMBER --||-----0<-- PM_DISTRIBUTION -->0-------||-- PRIVATE_MSG
MEMBER table
- id
- email
- username
- first_name
and so on...
PM_DISTRIBUTION table (Maybe you can think of a better name??)
- id
- private_msg_id
- sender_id
- recipient_id
- sender_flag
- sender_deleted_on
- sender_purged_on
- recipient_flag
- recipient_read_on
- recipient_deleted_on
- recipient_purged_on
PRIVATE_MSG
- id
- subject
- body
- sent_on
Is that what you were describing to me?
Quickly reflecting on this new design...
1.) It should now be in 3rd Normal Form, right?
2.) It should allow the Sender and Recipient to freely and independently "delete" or "purge" a PM with no impact on the other party, right?
Here are a few Potential Issues that I see, though...
a.) What is to stop there from being TWO SENDERS of a PM?
In retrospect, that is why I originally stuck "member_id_from" in the PRIVATE_MSG table!! The logic being, that a PM only ever has *one* Sender.
I guess I would have to add either Application Logic, or Database Logic, or both to ensure that a given PM never has more than one Sender, right?
b.) If the design above is what you were hinting at, and if it is thus "correct", then is there any conflict with my Business Rule: "Any given User shall only be allowed 100 Messages between his/her Incoming, Sent and Trash folders."
Because the Sender is no longer "tightly bound" to the PRIVATE_MSG, in my scenario above...
Debbie could send 100 PM's, hit her quota, then turn around and delete and purge all 100 Sent PM's and that should in no way impact the 100 PM's sitting in other Users' Inboxes, right??
I think this works like I want...
Sincerely,
Debbie

Help with Aiport Model 1084

I have a 2004 Airport Model A1084 & Macbook Pro with 0SX10.8.5. I am able to use my Macbook Pro and Apple TV at same time. However, if I want to access my IPad at the same time, the Airport will not let me. I have to disconnect and unplug the airport and start again ... at which time I can only access either the IPad or the Macbook Pro ... and not at the same time. I want to connect to my IPad, Macbrook Pro and Apple TV at same time. Do you know how to reset airport and then reset airport so I can do that?

UPDATE - Reset the Wii, it sees my apple network (yeah), but during the connection test, it fails. Help!!

What does Java3d have to help with 3d model rendering?

Well, basically i spent a few hours the other day writing a basic model rendering application, it uses the java.awt.Graphics class for the drawing and the java.awt.Canvas class for the main applet.
Now, it was a pretty hard project for me in my opinion as i have never attempted anything like it before, now, in using the awt Graphics class you have to work everything out yourself.
For example;
You have your model, this has x, y and z vertices, then you have your faces, which are triangles which link up 3 of the vertices to make a face or skin for the model. After this you have your "camera" or "view point", this relates to the x, y and z rotations, offset (for zooming) and transitions of all of the above data, then after all this you can finally create the triangle or face by using the Polygon class and inputing the x, y and z point values.
Now, i want to know if Java 3d has any of the above stuff already there for you to take advantage of, for example also lighting effects, such as the ability to add shadows.
Ive already looked through the Java 3d tutorial pdf but i couldn't see anything that relates to creating your own model's, the only thing i saw were pre-programmed shapes such as cubes and other polygons.
Thanks for any help.

Hi ,
Java 3d has many effects ready , like shadows , raytrace and... .
I think you may have 5 issues ,
1. Geometry and object models
2. Lighting
3. camera and rendering
4. Sound
5. Animation
for geometry , best solution is using modeling tools like 3D Studio Max , export model and import in your program.
for Lighting it has many light types , but 'm not good at using them ,
for camera it has lots of usefull stuff . even special rendering for 3dGlasses !
for Sound , as i know it supports 3d sound engine that renders your sound. ( I mean if your avator is close to sound source , sound is stronger , if source is left hand of avator , sound will apear in left speaker)

Need help with Toshiba model 42TL515U TV FAN

I recently had an error message pop up on the tv that says the tv fan went out. The tv has worked perfectly since i purchased it untill now. I'm very unhappy about it since i have taken great care of it the entire time and it is not my fault but toshibas for selling me the tv with a faulty internal fan and OF COURSE it tells me fan went out after my warranty just ended. I need help, answers and customer support because this is rediculous...

If there truly is a fan in the TL515U you can easily open up the TV, look at the fan specs, and replace it.
I bet the fan used in it are the ones used in computers.

Need help with DVD model/Firmware update info

I am sorry to post here but have found no other way to try and get help or information about a Toshiba, (supposedly) slim style internal DVDRW unit, TS-632H, for our computer. The label on the unit says Toshiba Samsung, and the complete number on the label is Tsst corp CDDVDW TS-632-H. (This is what is also shows in Device Manager/Properties for the unit. We are trying to find the (real) model of this unit so we can determine the firmware version to make sure we have the latest version on the unit and to see if there are any specific drivers for the unit. Thank you for your help and again, sorry if this may be the wrong forum and maybe directing us to an appropriate forum would be appreciated if there is such one. Thank you.
Message Edited by Cmptrguy on 04-12-2009 04:11 PM

The information you see in the Device Manager is correct. If you can furnish the full model# be of great assistance. There, try this-- Free Download TSST DVD Drive Firmware for Toshiba Notebooks You should be concerned that the driver is up to date as it more of an asset to you.

Help with a model and featu

I got lost trying to compare all the MP3 models so....can someone tell me which model(s) have these features. I looking for an MP 3 player with the following features. Aprox. 500 songs capacityFM radioFM recorderBookmark function so I could stop podcasts and return to where I left off.Screen so I could see albums and songs, podcasts from same site... Maybe I'd better stop there.

public class MyServlet extends HttpServlet {
     public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
          response.setContentType("text/html");
          PrintWriter out = response.getWriter();
          Connection conn = null;
          String Form1a = request.getParameter("Form1");
          String Form2a = request.getParameter("Form2");
          // do all your database stuff
          // if Form1a and Form2a are valid values
                MyBean bean = new MyBean(Form1a, Form2a);
          request.setAttribute("valid", bean);
   class MyBean{
           private String form1;
     private String form2;
     public MyBean(String form1, String form2) {
          this.form1 = form1;///////////////////////////////////
          this.form2 = form2;//////////////////////////////////
     public String getForm1() {
          return form1;
     public String getForm2() {
          return form2;
     public void setForm1(String form1) {
          this.form1 = form1;
     public void setForm2(String form2) {
          this.form2 = form2;
NB: you can also declare your bean in a separate java file. In this case, you have to add public to your class definition : public class MyBean ...A servlet has a log method to display messages :
http://java.sun.com/products/servlet/2.2/javadoc/javax/servlet/GenericServlet.html#log(java.lang.String)
hth

Help with VC Model Timing

Hi, I have a model that presents an HTML View or an Error Dialog. The HTML View should appear if an URL is returned from the Web Service. If no URL is returned then the Error Dialog should appear instead.
     The problem is that when a valid URL is returned from the Web Service the error dialog appears for just a second before the HTML View is presented . I think it has to do with timing of the the link between layers and the returning values from the web service.
     I have a guard condition and a display condition on the HTML View of NOT ISNULL(@url). The error dialog (form) has a display condition of ISNULL(@url).
I've included a link to the Story Board Layout. Can someone tell me what I would have to do to prevent the Error Dialog from appearing just before the HTML View?
<a href="http://i15.tinypic.com/507vrkk.jpg">VC Model Image</a>
Thanks, Ken Murray

Ken,
Not sure if I understood your question correctly, maybe if you could explain your requirement we could address what would be the best way to implement.
As far as your model goes, why do you need a condition on the submit event from layer 1 to layer 2? you definitely need an event frm layer 1 to layer 2. This is requried to navigate from the iView in layer 1 to layer 2. Try removing the submit transition line from layer 1 to 2 and see what happens..
I implemented the same scenario with condns only on html/form iviews in layer 2, you can chk it out at the link below:
<a href="https://wiki.sdn.sap.com/wiki/download/attachments/4141/example_01.JPG">example model</a>
prachi

Help with display model purchase

I bought a display model desktop, but Best Buy's demo software is on there. How do I
uninstall it. It keeps popping up after so many minutes, and it wont let me install other software
onto the computer. It says I need to insert the ARCHIE cd to take it off. Is this something they should have done at the store? Very frustrating. Any help would be greatly appreciated. Thanks.

Gozips - To answer your question , Yes they should have taken the ARCHIE software off at the store. The salesperson should have taken the laptop over to the GeekSquad to remove it. You should take the laptop back to the store and have it removed from your system as soon as you can.
Good Luck -
Message Edited by BostonBulldog on 01-08-2009 07:16 PM

I bought a new 5.5 gen ipod. Should I install it with the CD it came with or is that too out of date now (2006)? Can you direct me to any help with this model?

I bought a new 5.5 gen ipod. Should I install it with the CD it came with or is that too out of date now (2006)?

It is no longer needed. Simply download and install the latest version of iTunes (currently at 10.6) from Apple's website. It includes all the necessary software and files for your iPod to communicate with your PC and iTunes properly.
B-rock

Help with updating model and serial on thinkpad tablet 2

Hi was after the procedure for changing / updating the MTM and serial number on a thinkpad tablet 2 that has just had a new mainboard installed.
We are a authorised warranty center in AUS yur help would be appreciated

You need to go through your formal Lenovo contacts for these tools/procedures. We can't help you from the forum.

Help with simple Model?

Hi, I need to create a simple VC App that will allow me to maintain a cross reference table for materials. I'll need add, del, chg
Example:
KIT001 MAT00A (Material Kit KIT001 has Basic Material MAT00A
KIT009 MAT00E (Material Kit KIT009 has Basic Material MAT00E
Is there an easy way to create this maint without having to create new function modules and web services?

Hi
You can add, delete, change row in VC. Go to actions & look in System Actions. But you cannot store the values permenently.
Locally you can save the values with data store. I think this is waht you are looking for.
Regards
Sandeep

Help with Spinner Model

there are some examples how to make a spinner model to get values like 1, 1.5 2, 2.5.... ??
thanks

import javax.swing.*;
class Spin extends JFrame
public Spin()
    super( "Spin" );
    setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    setSize(200,75);
    setLocationRelativeTo(null);
    JSpinner spinner = new JSpinner(new SpinnerNumberModel(0.00, 0.00, 100.00, 0.5));
    spinner.setEditor(new JSpinner.NumberEditor(spinner, "0.0"));
    JPanel jp = new JPanel();
    jp.add(spinner);
    setContentPane(jp);
public static void main(String[] args) {new Spin().setVisible(true);}
}

Help with DYNEX Model: DX-55L150A11 - 55" 120Hz LCD Television

Similar Messages

Maybe you are looking for