Help with earlier version

I need an earlier version of Flash Player and instructions on downloading. The 11.0 version locks my computer and I tried the 10.3 but it also locked the computer. I have 32 bit windows vista home premium, 2.0 GB ram, 1.80 ghz processor. I am using Firefox browser. What will work on my computer?

Hi pjb1415,
Please refer the link below.
http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html#Flash Player archives
Go to the Older Archives and choose the installer. The zipped folder have "readme.txt" as well with instructions.
Ideally its recommended to have the latest version installed.
Thanks
Bhawna

Similar Messages

What are new features in BCS 6.0 compared with earlier versions?

Hi,
What are new features in BCS 6.0 compared with earlier versions. Can someone tell in few lines .. just the summary and we can find the docs since it is not seen in service.sap.com.
Many thanks,
Regards,
Ricardo Ferrã

Hi Fancia Luo
You can find the file which is suggested by Dan is available in the below link
https://websmp105.sap-ag.de/~form/handler?_APP=00200682500000002672&_EVENT=DISPLAY&_SCENARIO=01100035870000000122&_HIER_KEY=501100035870000016962&_HIER_KEY=601100035870000210480&_HIER_KEY=601100035870000237998&_HIER_KEY=601100035870000238002&_HIER_KEY=701100035871000517655&
If the above link is not helpful. Please follow the complete path to find the specified file.
https://websmp105.sap-ag.de/sem ---> SAP ERP Financials --> Financial Close --> Business Consolidation --> Media Library --> Select Release Information. Under this you can find the file SEM BCS 747 - Overview and Positioning of New Features.
Regards
Rajesh SVN

Itunes will not open, message says library was created with earlier version. what now?,

itunes will not open, message says library was created with earlier version. what do i do?

Unless you just attempted to downgrade iTunes to an earlier verison this is probably a sign of a corrupt library.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
tt2

AIR App now crashes with AIR 15 runtime (did not crash with earlier versions of AIR)

Hi,
We've noticed our AIR application now crashes when the AIR 15 (the latest version available from Adobe) runtime is installed. This did not happen with earlier versions of AIR. The app does not crash when I debug in Flash Builder so I cannot identify the exact issue. The app will crash EVERY time when running the .exe on Windows. The crash happens on Windows XP and Windows 7. The app does not crash on OS X.
The message in Event Viewer says:
Faulting application name: PhotoMambo.exe, version: 0.0.0.0, time stamp: 0x4eb75ae0
Faulting module name: Adobe AIR.dll, version: 15.0.0.249, time stamp: 0x53fe5c69
Exception code: 0xc0000005
Fault offset: 0x0056fcdc
Faulting process id: 0x3dc
Faulting application start time: 0x01cfd110de4c8b50
Faulting application path: C:\Program Files (x86)\PhotoMambo\PhotoMambo.exe
Faulting module path: c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Adobe AIR.dll
Report Id: 49c106e0-3d04-11e4-9219-001c42d9a43e
Please let me know if you'd like any additional information. This is such a bummer that an AIR update renders our app useless in Windows.
Thank you.

I'm sorry this is happening. Could you please open a new bug report on this over at bugbase.adobe.com? When adding the bug, please include sample code or an application so we can quickly test this out internally. If you'd like to keep this private, feel free to email the attachment to me directly ([email protected]).
Once added, please post back with the URL and I'll follow up internally.
Previous versions of the AIR runtime can be found here: Archived Adobe AIR SDK versions

Robustness "Managed Driver Beta" with earlier versions of clients

Hello,
i have tested the "Managed Driver Beta".
It works well.
It really is a great relief to distribute only a reference.
I have a production system in a live environment.
It is very important that there are no disturbances.
Now to my question:
Is there really when using the "Managed Driver" no problems with already installed clients with earlier versions? e.g. ORANT?
Thanks
Armin

Yep. It's nicely self-contained in its own assembly and namespace and doesn't impact on other things. If you really want to be paranoid about it, distribute it with your project instead of installing it on the server directly. That'll put it in your project's \bin folder and no other code will even realize it's there.

I'm running FF 3.6.17 and when I try to log into my Blackboard page, I get an error message, "no user is currently logged in." I have noticed that some have had compatibility problems with earlier versions of FF and Blackboard, but what gives?

This recently upgraded version of Blackboard is also giving me problems with IE, and even Google Chrome. Regardless of which Windows OS I try. On these others, however, I can log in, I just can't edit.
Blackboard tech support has been blundering with this issue for two and half weeks now. But to no avail. So, I'm wondering if going back to an earlier version of FF would help.

unfortunately the fiddler2 issuer in certificates might be a sign of unwanted software present on your pc that is intercepting secure network traffic. please go into the system control panel and uninstall programs like BrowserSafeguard, BrowserSafe, SafeGuard or other software that sounds suspicious and didn't get installed by you intentionally.
<br><sub>reference: https://support.mozilla.org/en-US/questions/982532#answer-520145</sub>
afterwards, run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Troubleshoot Firefox issues caused by malware]]

How to fix extremely slow printing from web pages with latest updates (iMac) & HP Office jet printer. (It was not a problem with earlier versions of Firefox & same computer & printer.)

The latest two updates of Mozilla Firefox are not useful for me because of extremely slow printing of web pages. It was never a problem before. Same iMac and HP officejet printer. How can I either fix it, or revert to an earlier version of the browser (without losing all my bookmarks) which didn't cause this problem?

Try scanning from your Mac. Use Image Capture app in your Applications folder.
Click once on the scanner on the left side, then click on Show Details along the bottom. Along the right side you will see LOTS of options for scanning and saving.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Premiere Pro CC 2014 seems to Corrupt projects created with earlier versions

I have opened in PPro CC 2014 projects created in PPro CS6 or PPro CC. Every time PPro crashed and got the message " PPro Debug Event - PPro encountered a major problem and has stopped working" After that the project seemed corrupted and could not be opened even in earlier versions.
I get the following message
Première Pro Debug Event (Title of the window)
Premiere Pro has encountered an error
[c:\caravan\releases 2014.09\shared\adobe\mediacore\mediafoundation\api\incK... (can't read the res...)
Then there is a "continue" button if I hit this button I get the following window
Following a serious error PPro must shut down. The program will try to record your current project.
Has anyone encountered this problem?
I don't dare open any old project. help!

Hi there!
I´ve updated to latest version and then opened my project and got this error.
Then I found in a forum that I should delete the ADOBE folder in \my documents
I´ve deleted and then I could open the file again.
But the .MP4 and some other video files doesn´t open.
I saw that the 'Effect Presets and Custom Items.prfpset' file on \my documents\adobe\premiere Pro\8.0\Profile-myprofilename was causing the error.
I also saw in other forum that I should rename Adobe folder to old.adobe from \userfolder\appdata\roaming and \userfolder\appdata\local but this hasn´t solved the problem.
I tried also to reinstall Quicktime and K-Lite Codec Pack but the problem persists.
Have you found any solution??
Regards
Lucas

Can you help with RoboHelp Version 11: WebHelp Index Keyword Sorting?

I'm new to RoboHelp 11, and I am finding it difficult to alphabetize topics listed under my Index Keywords. When I look at the keyword topics in my RoboHelp HTML editor, they are listed in alphabetical order (see the Tools topic in the first image), but when I generate WebHelp the Tools topics are not in the correct order (second image). I believe that the problem pertains to new entries made to a converted RoboHelp Version 6 WebHelp application. Basically, I have been adding content to several old version 6-generated html files in the new RoboHelp HTML editor.
Another issue that's perplexing is the fact that the Move Up and Move Down icons at the top of the Index editor pod, or whatever it's called, are grayed-out (not functioning). I remember with the Version 6 application, they worked fine.
Can anyone offer any suggestions on how to get the index alphabetized? I appreciate your help.

Hi, pweb248
Just an expansion of what Rick has suggested. Binary index is only used when Microsoft HTML Help "CHM" is your primary layout. So, because WebHelp is your primary layout, Binary should definitely be unchecked. Selecting the Index file (HHK) is fairly standard for WebHelp use and it is sorted numerically and alphabetically by default. The HHK file contains all the Index keywords and their topic associations all tucked into one file, whereas adding Index Keywords using the "Topic" radio button embeds the coded reference right in the topic html file itself.
This online help topic explains a little more about the Sorting options depending on the primary layouts and whether Binary is selected.
Adobe RoboHelp 11 * Edit index keywords
This is the key paragraph:
>>Note: The Sort command is unavailable with a binary index. The sort function is enabled only when the primary layout is HTML Help and the Index is set to Index File with no Binary Index. In all other layouts, the index remains sorted but for HTML output, the sorting of the index can be changed. Sorting enables the up and down keys on Index Pod.<<
As you have noticed, your Index Designer view is apparently working as documented. I share your puzzlement about the out-of-sort listing in the WebHelp output shown in your screenshot. I wonder if there is some left-over crud from the ancient RoboHelp 6 code that is not converted properly and gumming up the works? Also curious if you have more than one Index in your project and if you are selecting the right one in the WebHelp Settings > Content dialog. Maybe Rick, Peter or Willam can shed some light on this?
John

Can't open projects with Imovie 5 that were created with earlier version

I can't open my Imovie projects that I created when using Mac OS 9.2 now that I'm using Tiger and Imovie 5.
I'm not sure what version of Imovie I created them with. Do I need to find an earlier version and open them in the classic environment, or is there some way of converting or importing them?
iBook G4 Mac OS X (10.4.2)

Theoretically iMovie 5 can convert old projects, but projects created in Mac OS 9.2 can be quite difficult, for OS 9 is very different than OS X. More about that here:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=1677339
Your best option is to use the version of iMovie that you used originally to edit the project. If the projects are really old, that may require starting up your Mac in Mac OS 9 (instead of running iMovie in the Classic environment, which is Mac OS 9 running inside Mac OS X.)
Your best solution may be to boot up in Mac OS 9 and use your old version of iMovie to export the project back to the camera, then boot into Mac OS X and import the tape into iMovie 5.
If you don't have a camera, export to a Full Quality DV movie, then import that movie into iMovie 5.
The camera will (probably) deliver the clips to iMovie 5 as clips, while the export to a Full Quality DV movie will not.
By the way, to see which version of iMovie last edited the project, drop the project file on the TextEdit icon in the Dock. The version is shown at the top of the file.
iMovie 2.1.2 was the first version to run in OS X, I believe. The last version to run in OS 9 had the same version number, unfortunately.
If your Mac doesn't let you start up in Mac OS 9, then say more about exactly what happens when you try to convert the project. Do you get error messages? What are they?
Karl

QuickTime incompatibility with earlier versions

I run a tech support department for a software distributor. Some of the titles we sell have versions of QuickTime going back to 2.1. We spend a huge amount of time supporting customers with QuickTime issues because the program is not backwards-compatible. The earlier versions, say 2 - 4, offered the option on installing to "look for other versions of QuickTime," which you could "Skip" and then you could install different versions side-by-side on the same machine which worked fine - each program would look for its particular version.
I believe version 6.5.x was the first version of QT that, when installed and updated, seemed to work with the programs using earlier versions. Then series 7 arrived, which insisted that you uninstall any other versions, and it was not backwards-compatible...software developed with prior versions would not display the multimedia content.
One of the publishers we distribute programs for has a 2007 and 2008 edition of an encyclopedia that uses the 7.0.4.80 QuickTime. This version, once installed, defaults to automatically upgrade to the latest version of QT, but when users update the program to 7.2, they receive an error message that QT won't play MP3 and MP4 files. The only fix that we've discovered is to manually replace one of the Jar files. Apparently, a file in the 7.0 verion of QT is looking for that specific version of QT.
We have hundreds of software titles that won't run on a system with the new QT. Some of our publishers that use QT are as concerned with the compatibility issues as we are, and are considering alternative programming for their multimedia content. We've spent countless hours trying to offer support to users who are frustrated - either that their current software is no longer working, or that new purchases are experiencing QuickTime problems.
Occasionally we are forced to recommend uninstalling the latest version of QT and reinstalling a prior version, at the same time disabling the option to update the program. We are looking at the possibility of discontinuing distribution of programs that use QuickTime.
If anyone has any information that would shed any light on this situation, we're open to suggestions. We are in a unique position to assist in resolving this problem since we have several programs using different versions of QuickTime, and we're also to communicate any antidotes that may exist to the other publishers we work with, so any feedback would be greatly appreciated!
[email protected]

What Kirk says is generally true so far as QuickTime support for earlier versions of QuickTime media.
That said, I wonder if there is another set of problems here. Could it be that the media is supported, but the system calls are not? QuickTime for Java, for instance, has come, gone, and come back again, and in any case does not support the complete QuickTime API.
Another problem I have seen is that the default settings for the QuickTime installer seem to change periodically, and it affects the types of media that QuickTime will handle by default. Part of that is because in an early version, QuickTime did the same thing that RealPlayer does now, taking over ALL media types whether it could play them or not. Now the installer is much better behaved, but any application that just opens a file and assumes QuickTime will handle it, as opposed to opening QuickTime and using it to open the file, will break. Likewise, in the name of "security", Apple has recently removed some of the interactive features from QuickTime (why was it Apple's responsibility to fix a lazy programmer error at MySpace, anyway?)
The fact remains that QuickTime is the best multimedia platform out there, but there have been changes, and my guess is that the most critical changes are not in the support for older media, but rather in the API.
--Dave Althoff, Jr.

Logic will not open files created with earlier versions?

Logic Pro 9 will not open willnot open files created in earlier versions advising that attempts should be mad using Logic pro 7. My Mac Pro wil not open this version of Logic "because PowerPC applkcations are no longer supported." Any help would be very much appreciated since I need to have books reprinted.
Thanks

Pancenter wrote:
Won't help, the "installer" (through Logic 8) uses some PPC code, this person is running Lion which means no version of 7 or 8 can be installed.
Hi
I think that the PPC installer can be worked around (?):
Make disk images of the Install Disks, mount them all, then use Pacifist to run the Install process
Looks like it should work here..
CCT

Since installing Firefox 4 I can't open my emails (Talk Talk). THey tell me it's an issue with Firefox 4. I've not had this problem with earlier versions. Help!

When I log in to my email account, I get the message "You have undefined emails " and I can't login to my inbox. This didn't happen until I installed Firefox 4.

I have the same problem as luiszamarreno. I tried using the following to update:
sudo apt-get --purge remove adobe-flashplugin flashplugin-nonfree; sudo apt-get --purge autoremove; sudo apt-get clean; sudo apt-get upgrade; sudo apt-get --purge autoremove; sudo apt-get install flashplugin-nonfree
Now I have the "flashplugin-nonfree" v. 10.01.218+really9.0.283.0ubuntu1 and it still doesn't work for the Facebook plugin. I get the notice it has crashed and needs to be updated. I also get a notice to update on the plugins page under tools --> addons. When I try that, it goes to the Adobe Web site, which I have seen on Ubuntu support sites that I do not want to upgrade from there.
Does anybody have an answer to this?

Using 3.6.12, when I enter a bid on eBay, FF immediately signs off eBay. Never had that problem with earlier versions. I do not have this problem with Internet Explorer.

Using FF 3.6.12, I can log onto eBay, view my account, rate a purchase or win, and search for items. In other words, pretty much do anything normally on eBay.
But if I try to enter a bid on an item, the program exits eBay.com and I get the "You've Signed Off. See You Again Soon!" screen. This happens every time I try to enter or re-enter a bid.
I've been using Firefox for a few years to bid on eBay without any problems. This started as soon as I upgraded to 3.6.12 a month or so ago. Any suggestions?
I've been forced to use Internet Explorer just to get on eBay and bid now. Not nearly as fast and elegant as Firefox. Help!

To re-install Lightroom 5.4, there's no need to go back to the original full version and systematically re-install every upgrade you've ever purchased in order to re-install the latest version. All you need to do is re-install your most recent version (in this case 5.4), enter your Lightroom 5 serial number then enter your Lightroom 4 serial number when prompted. That's it.
How did you first license the Lightroom 5 upgrade on your computer? Since it's not a subscription version, you must have received a version 5 serial number somewhere in the purchasing process. Without a record of that, Adobe Customer Care may struggle with your case.
If you're running Windows, you can try running the free Belarc Advisor which often successfully retrieves your full serial number from inside your computer.
Belarc Advisor - Free Personal PC Audit, for software, hardware and security configuration information on your computer.…

Can someone help with Incompatible versions error with taglib and project?

Evening all,
I am trying to import a tag library into my web project but I keep getting the error "Incompatible versions: Tag library is version 1.2, project version is version 1.1".
I am using IBM Rational Application Developer as my IDE, Tomcat 5.0 as my target server and I'm compiling my code with SUNs 1.4.2 JRE.
I created the tag library as a java project and my web site as a dynamic web project in IBM RAD.
If anyone can tell me why I'm getting this error message and, if possible, how to fix it I would be very grateful.
Thanks in advance,
Alex

Evening all,
I am trying to import a tag library into my web
project but I keep getting the error "Incompatible
versions: Tag library is version 1.2, project version
is version 1.1".1.1 and 1.2 might be referring to the servlet spec level supported by each.
I am using IBM Rational Application Developer as myIDE, Irrelevant, I believe.
Tomcat 5.0 as my target server and Tomcat version 5 implements the Servlet 2.4 and JavaServer Pages 2.0.
I'm compiling my code with SUNs 1.4.2 JRE.That's fine.
>
I created the tag library as a java project and my
web site as a dynamic web project in IBM RAD.I wonder if all you have to do is recompile and repackage your tag library. Maybe it's an older library that has to be updated to the spec supported by Tomcat 5.0
If anyone can tell me why I'm getting this error
message and, if possible, how to fix it I would be
very grateful.
Thanks in advance,
AlexSee if that helps, Alex.
%

Help with earlier version

Similar Messages

Maybe you are looking for