Help with EasyLink Advisor for WRT54GS

Ok when I try and bring up the EasyLink Advisor for my router it says Administrator Privileges Required then under that it says You must be logged on as a user with administrator privileges to modify the computer's configuration for home networking. The thing is though that I am logged in as the administrator. I have never had this message appear before. I have gotten on the EasyLink Advisor numerous times to find the IP Address and stuff so I can connect my Xbox, iPod Touch wifi, and stuff like that. But now it won't let me do anything. I used to have Windows Vista on my computer but then I upgraded to Windows 7 and I think this is the problem because it started happening after I upgraded. Help!
Solved!
Go to Solution.

Yes the Easy Link Advisor is not supported on Win 7. You don't need it anyway. Simply connect to 192.168.1.1 with user name blank, password admin and check all status from the router itself.

Similar Messages

EasyLink Advisor for WRT54GS

I am using the Linksys WRT54GS EasyLink Advisor software that came with my router. My computer is running XP windows. But I can not get the Adsvisor software to work, it is loaded into my system but when go to the program all my options are grey, I can not see any of my devices connected nor can I add any. The EasyLink Advisor is a verision :7.0.03 can any one help me?

LELA is not supported under Windows 7.

Easylink Advisor for WRT54G v6

I thought that Easylink Advisor would be available on the CD that came with the WRT54G router, but I don't see it. Do I have to install the Setup Wizard from the CD to use Easylink Advisor? My WRT54G router is working normally. I just want to print out the network settings with the Easylink Advisor.
Next question, assuming that there is a version of Easylink Advisor out there that works with WRT54G v6, where can I download it from?
Thanks.

Not on that old router. Use the standard web address to configure.

HELP HELP HELP with adminstrator password for pavilion dv7 beats audio

Hi. I need help with adminstrator password for pavilion dv7 with window 7. I don't remember with is the adminstrator password for pavilion dv7 beats audio. Is there anyway you can help me with this? once i enter 3 times is gives me this system disabled code: 52464663.

Hi
Try this Key : 43542265 That should fix your issue
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

Help with Simple Applescript for Midipipe

Hey all, I'm in desperate need of help with some Applescript for use in a program called Midipipe:
http://web.mac.com/nicowald/SubtleSoft/MidiPipe.html
I simply require an Applescript for Midipipe that filters out all OFF notes except for the most recently pressed key, or most recently pressed ON note. So for example, when multiple keys have been pressed, only the most recently pressed key will send an OFF note. I hope that is clear enough, i've had some major issues trying to get this work and my last hope is to hit the forums and find some help .. I've posted on some of the audio forums and i'm hoping someone here knows how to code this.
Thanks so much!! .. Its for an upcomming show next week so i'm hoping someone can get me in the right direction to solving this.
-Jes

I try to help, but you'll need to apply your brain cells to get it working with what I've already explained (three times with what I offer below). Try something like the following (I am renaming your buttons to ch1,ch2,ch3,ch4,ch5,ch6 so that the same functions can be shared by all buttons...
// this assigns listeners to all 6 buttons
for(var i:uint=1; i<7; i++){
          this["ch"+String(i)].addEventListener(MouseEvent.CLICK, fl_ClickToSeekToCuePoint);
// this processes any one of the 6 btns when they are clicked
function fl_ClickToSeekToCuePoint_1(event:MouseEvent):void
    var btn = event.currentTarget;
    var cuePointInstance:Object = vid.findCuePoint(btn.name);
    vid.seek(cuePointInstance.time);
   resetButtons();    // this makes all buttons go back to normal
    btn.upState = btn.overState; // this makes the clicked button change states
function resetButtons():void {
     for(var i:uint=1; i<7; i++){
          this["ch"+String(i)].upState = this["ch"+String(i)].hitTestState;
For this to work, your buttons need to have the same artwork in the hit frame as they do in the up frame.

I still need help with the Dictionary for my Nokia...

I still need help with the Dictionary for my Nokia 6680...
Here's the error message I get when trying to open dictionary...
"Dictionary word information missing. Install word database."
Can someone please provide me a link the where I could download this dictionary for free?
Thanks!
DON'T HIT KIDS... THEY HAVE GUNS NOW.

oops, im sorry, i didnt realised i've already submitted it
DON'T HIT KIDS... THEY HAVE GUNS NOW.

Issue concerning the EasyLink Advisor for the Wrt54gs v6.0

On Monday of this last week, my ISP was changed from DirectTV/Qwest, to Cox Cable. When I returned home, our connection setup had been changed. We had setup a modem and the router in a different room, with the network being unsecure, and not supported by a computer system. Now, we have the router connected to the PC, and the modem in the room as well.
Now, the Circo System light is orange, as opposed to the usual white, and my wireless adapter gets kicked off of the network I had to recreate, which is unsecure, every 12 hours. I think this may be because the CPU with the wireless router does not have the EasyLink Advisor installed on it, and the disc is nowhere in sight.
My question is, do I need the advisor, and if so, where can I get it, without the disc? I've looked around the forum, and I can't find a clue. The system with the wireless router is a Windows XP, and the system with the adapter is a Windows Vista. And if that happens to not be the case, what should I try to do? Any help is appreciated, thank you.

No need to use the easylink advisor what you could do is try upgrading the firmware of the router & keep on holding tightly the reset button in such a way that power light is blinking on the router & then do a complete network power cycle i.e., unplug the power cables from the modem & from the router & then plug in the power cable
to the modem first once all the lights are solid green you could plug in the power cable to the router & check out it will definatelyConfiguration for cable connection:-
Access the setup page of the router by launching an Browser and type on the address bar, 192.168.1.1 and press enter. When it prompts for the username and password, leave the username field empty and provide password as admin" (Without quotes) click on ok.
On the main setup page the ""Internet Connection Type"" should be on ""Obtain IP Automatically - DHCP “. Click on the Save Settings button.
Now click on the sub tab ""MAC address clone"".
- Click on enable
Click Clone & click save settings
Check WAN Ip on Status page of router ....
If getting Valid Ip .... try going online
If not ... power cycle for 4-5 minutes & then agian check the WAN Ip address .....
Step 03 : To configure the router for Wireless.
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here Wireless Network mode should be mixed
- Provide any name in the Wireless Network Name (SSID) box, all in
lower cases without any spaces in between.
- Set wireless channel to 11
- And wireless SSID broadcast should be Enabled and then click on save
settings.
Please make a note of Wireless Network Name (SSID) as this is the
Network Identifier.
For Wireless Security : -
Now Click on the Sub tab under Wireless > Wireless Security.
Change the Wireless security mode to WEP
Encryption should be 64 bits.
Leave the Pass phrase blank, don't type in anything.
And under WEP Key 1 type in any 10 numbers please.Click on save
settings.
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network & you will be able to go Online Wirelessly!!!

Cannot remove "Network Device" with Easylink Advisor

Hi,
I have a device that i cannot remove. When I click on the tab for options I see "Details", "Rename", and "Track as Intruder" but not "Remove". I have the option to "Remove" from my acknowledged devices but not this one. This is on a PC with XP running Advisor version 3.11.
Any suggestions?
Thanks.

Easylink Advisor does not have the option to "Remove".
You can try uninstall and re-installing the software once.

Help with if statement for a beginner.

Hello, Im new to the dev lark and wondered if someone could point me in the right direction.
I have the following (working!) app that lets users press a few buttons instead of typing console commands (please do not be too critical of it, its my first work prog).
//DBS File send and Receive app 1.0
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import javax.swing.*;
import java.awt.BorderLayout;
import java.awt.FlowLayout;
import java.awt.Font;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JCheckBox;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JTextArea;
import java.applet.Applet;
public class Buttons extends JFrame
     public Buttons()
          super("DBS 2");
          JTextArea myText = new JTextArea   ("Welcome to the DBS application." +
                                                       "\n" +
                                                       "\n\n1. If you have received an email informing you that the DBS is ready to dowload please press the \"Receive DBS\" button." +
                                                       "\n" +
                                                       "\n1. Once this has been Received successfully please press the \"Prep File\" button." +
                                                       "\n\n2. Once the files have been moved to their appropriate locations, please do the \"Load\" into PAS." +
                                                       "\n\n3. Once the \"Load\" is complete, do the \"Extract\"." +
                                                       "\n\n4. When the \"Extract\" has taken place please press the \"File Shuffle\" button." +
                                                       "\n\n5. When the files have been shuffled, please press the \"Send DBS\" Button." +
                                                       "\n\nJob done." +
                                                       "\n", 20,50);
          JPanel holdAll = new JPanel();
          JPanel topPanel = new JPanel();
          JPanel bottomPanel = new JPanel();
          JPanel middle1 = new JPanel();
          JPanel middle2 = new JPanel();
          JPanel middle3 = new JPanel();
          topPanel.setLayout(new FlowLayout());
          middle1.setLayout(new FlowLayout());
          middle2.setLayout(new FlowLayout());
          middle3.setLayout(new FlowLayout());
          bottomPanel.setLayout(new FlowLayout());
          myText.setBackground(new java.awt.Color(0, 0, 0));
          myText.setForeground(new java.awt.Color(255,255,255));
          myText.setFont(new java.awt.Font("Times",0, 16));
          myText.setLineWrap(true);
          myText.setWrapStyleWord(true);
          holdAll.setLayout(new BorderLayout());
          topPanel.setBackground(new java.awt.Color(153, 101, 52));
          bottomPanel.setForeground(new java.awt.Color(153, 0, 52));
          holdAll.add(topPanel, BorderLayout.CENTER);
          topPanel.add(myText, BorderLayout.NORTH);
          setSize(700, 600);
          setDefaultCloseOperation(EXIT_ON_CLOSE);
          getContentPane().add(holdAll, BorderLayout.CENTER);
          Container c = getContentPane();
          c.setLayout(new FlowLayout());
          final JButton receiveDBS = new JButton("Receive DBS"); //marked as final as it is called in an Inner Class later
          final JButton filePrep = new JButton("Prep File");
          final JButton fileShuffle = new JButton("File Shuffle");
          final JButton sendDBS = new JButton("Send DBS");
          JButton exitButton = new JButton("Exit");
//          JLabel statusbar = new JLabel("Text here");
          receiveDBS.setFont(new java.awt.Font("Arial", 0, 25));
          filePrep.setFont(new java.awt.Font("Arial", 0, 25));
          fileShuffle.setFont(new java.awt.Font("Arial", 0, 25));
          sendDBS.setFont(new java.awt.Font("Arial", 0, 25));
          exitButton.setBorderPainted ( false );
          exitButton.setMargin( new Insets ( 10, 10, 10, 10 ));
          exitButton.setToolTipText( "EXIT Button" );
          exitButton.setFont(new java.awt.Font("Arial", 0, 20));
          exitButton.setEnabled(true); //Set to (false) to disable
          exitButton.setForeground(new java.awt.Color(0, 0, 0));
          exitButton.setHorizontalTextPosition(SwingConstants.CENTER); //Don't know what this does
          exitButton.setBounds(10, 30, 90, 50); //Don't know what this does
          exitButton.setBackground(new java.awt.Color(153, 101, 52));
          topPanel.add(receiveDBS);
          middle1.add(filePrep);
          middle2.add(exitButton);
          middle3.add(fileShuffle);
          bottomPanel.add(sendDBS);
          receiveDBS.addActionListener(new ActionListener()
               public void actionPerformed(ActionEvent ae)
                    if (ae.getSource() == receiveDBS);
                    try
                         Runtime.getRuntime().exec("cmd.exe /c start c:\\DBS\\ReceiveDBSfile.bat");
                    catch(Exception e)
                         System.out.println(e.toString());
                         e.printStackTrace();
          filePrep.addActionListener(new ActionListener()
               public void actionPerformed(ActionEvent ae)
                    if (ae.getSource() == filePrep);
                    try
                         Runtime.getRuntime().exec("cmd.exe /c start c:\\DBS\\filePrep.bat");
                    catch(Exception e)
                         System.out.println(e.toString());
                         e.printStackTrace();
          exitButton.addActionListener(new ActionListener()
               public void actionPerformed(ActionEvent ae)
                    System.exit(0);
          fileShuffle.addActionListener(new ActionListener()
               public void actionPerformed(ActionEvent ae)
                    if (ae.getSource() == fileShuffle);
                    try
                         Runtime.getRuntime().exec("cmd.exe /c start c:\\DBS\\fileShuffle.bat");
                    catch(Exception e)
                         System.out.println(e.toString());
                         e.printStackTrace();
          sendDBS.addActionListener(new ActionListener()
               public void actionPerformed(ActionEvent ae)
                    if (ae.getSource() == sendDBS);
                    try
                         Runtime.getRuntime().exec("cmd.exe /c start c:\\DBS\\sendDBSFile.bat");
                    catch(Exception e)
                         System.out.println(e.toString());
                         e.printStackTrace();
          c.add(receiveDBS);
          c.add(filePrep);
          c.add(fileShuffle);
          c.add(sendDBS);
          c.add(exitButton);
//          c.add(statusbar);
     public static void main(String args[])
          Buttons xyz = new Buttons();
          xyz.setVisible(true);
     }What I would like help with is the following
I would like output to either a JLabel or JTextArea to appear if a file appears on the network. Something along these lines
If file named nststrace*.* is in \\[network path] then output Download successful, please proceed.
btw I have done my best to search this forum for something similar and had no luck, but I am looking forward to Encephalopathics answer as he/she has consistently made me laugh with posted responses (in a good way).
Thanks in advance, Paul.

Hospital_Apps_Monkey wrote:
we're starting to get aquainted, but I think "best friend" could take a while as it is still as hard going as I recall, but I will persevere.Heh, it's not so bad! For example, if I had no idea how to test whether a file exists, I would just scan the big list of classes on the left for names that sound like they might include File operations. Hey look, File! Then I'd look at all of File's methods for something that tests whether it exists or not. Hey, exists! Then if I still couldn't figure out how to use it, I'd do a google search on that particular method.

Help with Mathscipt and for loop

I have a code in Mathscript/matlab and I need to output the array out. One option is my first code,the other option is using a for loop, but I am only getting the last ouput out. I need to get the whole output out.
Any help.
Thanks
Solved!
Go to Solution.
Attachments:
Help with Mathscript_for loop.vi ‏115 KB
Help with Mathscript_for loop2.vi ‏84 KB

Here's how it should look like.
Message Edited by altenbach on 10-30-2008 05:12 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
MathscriptInFOR.png ‏15 KB

Help with system upgrade for CS6

Hello. I am hoping you can give me some advice on what to do (or buy) to improve my video editing system. I am a bit of novice when it comes to the technical/hardware end of things and I’m having some issues with my current system.
I working in Adobe CS6 Master Suite on a Windows 7 Ultimate PC. I mainly use Premiere Pro, After Effects, Photoshop, and Audition. I create very complete animations and videos with many layers and effects (via Boris & Red Giant). I also use Skype to record group video calls (with the program Evaer) for a reality T.V. recap show which I also edit with my Adobe suite. However I have two main problems.
When I render out a 20 minute premier pro project (with several HD video layers and effects) it takes almost 13 hours. It seems like this is very long considering my high end components, and set up. For example I run ONLY my OS off an SSD. My programs are on another SSD. The files I use for the video are on another HDD, and I render to another HDD. I was told by keeping all the aspects on separate hard drives it would speed everything up. Is that true? I also am now reading that rendering to a SSD would speed things up. Should I consider changing my workflow/hard drive set up that way?
My other problem is that when I record my Skype group calls of 4 people (with Evaer) to my SSD the audio is always off when I bring it into Premiere. I don’t know if this is a problem with Evaer, a codec (it records it as H.264/MPEG-4 AVC Codec. At 1280 X 720 and 30fps), that SSDs auto compress files, or that my system just cant handle it. Plus Soundblaster & Nvida both seem to active as audio features on my system I don’t know if that effects anything. Is there any advice any of you have on this issue as well? Perhaps another program to record skype or group calls?
Finally… all that aside. Considering the work I am doing should I just upgrade my system to a better Mobo and graphics card. I see a lot of people are recommending a dual processor work station. If so what is a good motherboard, and processor(s) I should get if I build my own workstation? I have about $4000.00 I could invest in building one if you think would greatly improve my work flow and render times. I also have a quadro k5000 on the way, and id like to be able to use the memory I have already.
I realize I am asking a lot of questions. I would truly appreciate any help, advice or just a point in the right direction. I have included my current system specs below incase that helps with any of my questions. If you have any other questions or need more information just let me know. Thank you again in advance for any help you can provide.
-Eric
MOTHERBOARD:
Gigabyte G1.Assassin http://www.gigabyte.com/products/product-page.aspx?pid=3752#ov
PROCESSOR:
Intel Core i7 X 980
5 HARD DRIVES:
(1) SATA II WD (WD15EADS-00P8B0) 3gb Hard Drive @ 1.5TB
(2) OCZ SATA AGILITY II SSD drives @120GB: http://www.newegg.com/Product/Product.aspx?Item=N82E16820227543
(2) Hitachi 6gb SATA III drives @2TB: http://www.newegg.com/Product/Product.aspx?Item=N82E16822145473
3 DVD/CD/BLUERAY DRIVES:
(1) SATA DVD DRIVE
(1) SATA BlueRay Drive
RAM:
24GIGs of this ram: http://www.newegg.com/Product/Product.aspx?Item=N82E16820145321
GRAPHICS:
(1) NVIDIA GeForce GTX 680 http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-680
SOUND CARD:
NONE DEDICATED: But Onboard Creative Soundblaster X-Fi Digital Audio Processor (20K2) with X-Fi Xtreme Fidelity™ and EAX® AHD 5.0™ Technologies built into MoBo.
PLUS: NVIDIA High Definition Audio
CONTROLLERS:
Microsoft ISATAP Adapter
Intel(R) ICH10R SATA AHCI Controller
Realtek PCI GBE Family Controller
Marvell 91xx SATA 6G Controller
Renesas Electronics USB 3.0 Host Controller
MY HARD DRIVE SETUP:
*I also have a network server which I use to back up files, and access files across my other systems.

Eric,
I would hardly call the Quadro card an upgrade to a GTX 680!
Regarding getting more speed from a faster MB / CPU, since you already have a 6-core rig with 24GB of RAM I would think that any gains you would get would not be that dramatic.
Check out your cpu usage (Task manager) and see how busy your cores are during a test render. I am guessing that the Boris and / or Red Giant effects could be jumping your projects from gaining the full multi-core capabilities of the Adobe software.
Regards,
Jim

Please help with RMAN dup for RAC db

Happy Holidays!! All,
I need help with the following issue:
Both target and auxiliary databases are:
Database version is 10.2.0.3 with 2-node RAC db
Servers are MS 2003
Oracle Clusterware 10.2.0.3
Oracle ASM for storage
I have run the rman dup from RAC to a single instance db for a while. This is the first time I ran from RAC to RAC. This auxiliary db was refreshed before and was up for a while and was managed by server control tool. Now I am trying to refresh it with new backup files from production. I did the following as people suggested:
1)     shutdown instance in the second node.
2)     Startup nomount mode in the first node
3)     Run RMAN dup
It failed in the same place with slightly different errors. I pasted error messages at the bottom. I already created a TAR with Oracle but would like to know if anybody has any info related to this. Also I have several questions to ask:
1)     Should I stop all services related to Oracle in node-2
2)     Should I stop all clustware related services in node-1 except oracleCSServie since ASM uses it?
3)     Is there any way I can finish the dup manually from the place I failed? What going to happen if I don’t finish the rest of the dup and go ahead with “alter database open resetlogs”?
4)     How do I remove the database from under Server control – I already run “srvctl remove database -d atlrac” successfully. Is this all?
Thanks a lot for your help and have a great holiday season!!!
First time run:
contents of Memory Script:
shutdown clone;
startup clone nomount ;
executing Memory Script
database dismounted
Oracle instance shut down
connected to auxiliary database (not started)
RMAN-00571: ====================================================
RMAN-00569: ======= ERROR MESSAGE STACK FOLLOWS ==============
RMAN-00571: =============================================
RMAN-03002: failure of Duplicate Db command at 12/21/2009 20:24:47
RMAN-03015: error occurred in stored script Memory Script
RMAN-04014: startup failed: ORA-00610: Internal error code
Second time run:
contents of Memory Script:
shutdown clone;
startup clone nomount ;
executing Memory Script
database dismounted
Oracle instance shut down
connected to auxiliary database (not started)
RMAN-00571: ===================================================
RMAN-00569: ========== ERROR MESSAGE STACK FOLLOWS ==========
RMAN-00571: ===================================================
RMAN-03002: failure of Duplicate Db command at 12/22/2009 15:53:27
RMAN-03015: error occurred in stored script Memory Script
RMAN-04014: startup failed: ORA-03113: end-of-file on communication channel
Shirley

1) Should I stop all services related to Oracle in node-2
No, you just need to stop the second instance.
2) Should I stop all clustware related services in node-1 except oracleCSServie since ASM uses it?
No, you don't need to stop anything. Just have the instance startup nomount.
3) Is there any way I can finish the dup manually from the place I failed? What going to happen if I don’t finish the rest of the dup and go ahead with “alter database open resetlogs”?
You have not shown enough information. Did the restore succeed ? Did the recover succeed ? What was it doing when it failed ?
4) How do I remove the database from under Server control – I already run “srvctl remove database -d atlrac” successfully. Is this all?
Yes, srvctl remove database is all you need. (unless you also want to remove from listener.ora, tnsnames.ora, oratab etc)

Need help with calculator project for an assignment...

Hi all, I please need help with my calculator project that I have to do for an assignment.
Here is the project's specifications that I need to do"
"""Create a console calculator applicaion that:
* Takes one command line argument: your name and surname. When the
program starts, display the date and time with a welcome message for the
user.
* Display all the available options to the user. Your calculator must include
the arithmetic operations as well as at least five scientific operations of the
Math class.
-Your program must also have the ability to round a number and
truncate it.
-When you multiply by 2, you should not use the '*' operator to perform the
operation.
-Your program must also be able to reverse the sign of a number.
* Include sufficient error checking in your program to ensure that the user
only enters valid input. Make use of the String; Character, and other
wrapper classes to help you.
* Your program must be able to do conversions between decimal, octal and
hex numbers.
* Make use of a menu. You should give the user the option to end the
program when entering a certain option.
* When the program exits, display a message for the user, stating the
current time, and calculate and display how long the user used your
program.
* Make use of helper classes where possible.
* Use the SDK to run your program."""
When the program starts, it asks the user for his/her name and surname. I got the program to ask the user again and again for his/her name and surname
when he/she doesn't insert anything or just press 'enter', but if the user enters a number for the name and surname part, the program continues.
Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??
Here is the programs code that I've written so far:
{code}
import java.io.*;
import java.util.*;
import java.text.*;
public class Project {
     private static String nameSurname = "";
     private static String num1 = null;
     private static String num2 = null;
     private static String choice1 = null;
     private static double answer = 0;
     private static String more;
     public double Add() {
          answer = (Double.parseDouble(num1) + Double.parseDouble(num2));
          return answer;
     public double Subtract() {
          answer = (Double.parseDouble(num1) - Double.parseDouble(num2));
          return answer;
     public double Multiply() {
          answer = (Double.parseDouble(num1) * Double.parseDouble(num2));
          return answer;
     public double Divide() {
          answer = (Double.parseDouble(num1) / Double.parseDouble(num2));
          return answer;
     public double Modulus() {
          answer = (Double.parseDouble(num1) % Double.parseDouble(num2));
          return answer;
     public double maximumValue() {
          answer = (Math.max(Double.parseDouble(num1), Double.parseDouble(num2)));
          return answer;
     public double minimumValue() {
          answer = (Math.min(Double.parseDouble(num1), Double.parseDouble(num2)));
          return answer;
     public double absoluteNumber1() {
          answer = (Math.abs(Double.parseDouble(num1)));
          return answer;
     public double absoluteNumber2() {
          answer = (Math.abs(Double.parseDouble(num2)));
          return answer;
     public double Squareroot1() {
          answer = (Math.sqrt(Double.parseDouble(num1)));
          return answer;
     public double Squareroot2() {
          answer = (Math.sqrt(Double.parseDouble(num2)));
          return answer;
     public static String octalEquivalent1() {
          int iNum1 = Integer.parseInt(num1);
String octal1 = Integer.toOctalString(iNum1);
return octal1;
     public static String octalEquivalent2() {
          int iNum2 = Integer.parseInt(num2);
          String octal2 = Integer.toOctalString(iNum2);
          return octal2;
     public static String hexadecimalEquivalent1() {
          int iNum1 = Integer.parseInt(num1);
          String hex1 = Integer.toHexString(iNum1);
          return hex1;
     public static String hexadecimalEquivalent2() {
          int iNum2 = Integer.parseInt(num2);
          String hex2 = Integer.toHexString(iNum2);
          return hex2;
     public double Round1() {
          answer = Math.round(Double.parseDouble(num1));
          return answer;
     public double Round2() {
          answer = Math.round(Double.parseDouble(num2));
          return answer;
          SimpleDateFormat format1 = new SimpleDateFormat("EEEE, dd MMMM yyyy");
     Date now = new Date();
     SimpleDateFormat format2 = new SimpleDateFormat("hh:mm a");
     static Date timeIn = new Date();
     public static long programRuntime() {
          Date timeInD = timeIn;
          long timeOutD = System.currentTimeMillis();
          long msec = timeOutD - timeInD.getTime();
          float timeHours = msec / 1000;
               return (long) timeHours;
     DecimalFormat decimals = new DecimalFormat("#0.00");
     public String insertNameAndSurname() throws IOException{
          boolean inputCorrect = false;
               while (inputCorrect == false) {
                    while (nameSurname == null || nameSurname.length() == 0) {
                         for (int i = 0; i < nameSurname.length(); i++) {
                         if ((nameSurname.charAt(i) > 'a') && (nameSurname.charAt(i) < 'Z')){
                                   inputCorrect = true;
                    else{
                    inputCorrect = false;
                    break;
                    try {
                         BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
                         System.out.print("Please enter your name and surname: ");
                         nameSurname = inStream.readLine();
                         inputCorrect = true;
                    }catch (IOException ex) {
                         System.out.println("You did not enter your name and surname, " + nameSurname + " is not a name, please enter your name and surname :");
                         inputCorrect = false;
                    System.out.println("\nA warm welcome " + nameSurname + " ,todays date is: " + format1.format(now));
                    System.out.println("and the time is now exactly " + format2.format(timeIn) + ".");
                    return nameSurname;
          public String inputNumber1() throws IOException {
          boolean inputCorrect = false;
               while (inputCorrect == false) {
                    try {
                         BufferedReader br = new BufferedReader (new InputStreamReader(System.in));
                         System.out.print("\nPlease enter a number you want to do a calculation with and hit <ENTER>: ");
                         num1 = br.readLine();
                         double number1 = Double.parseDouble(num1);
                         System.out.println("\nThe number you have entered is: " + number1);
                         inputCorrect = true;
                    } catch (NumberFormatException nfe) {
                         System.out.println("\nYou did not enter a valid number: " + "\""+ num1 + "\" is not a number!!");
                         inputCorrect = false;
                    return num1;
     public String calculatorChoice() throws IOException {
          System.out.println("Please select an option of what you would like to do with this number from the menu below and hit <ENTER>: ");
          System.out.println("\n*********************************************");
          System.out.println("---------------------------------------------");
          System.out.println("Please select an option from the list below: ");
          System.out.println("---------------------------------------------");
          System.out.println("1 - Add");
          System.out.println("2 - Subtract");
          System.out.println("3 - Multiply");
          System.out.println("4 - Divide (remainder included)");
          System.out.println("5 - Maximum and minimum value of two numbers");
          System.out.println("6 - Squareroot");
          System.out.println("7 - Absolute value of numbers");
          System.out.println("8 - Octal and Hexadecimal equivalent of numbers");
          System.out.println("9 - Round numbers");
          System.out.println("0 - Exit program");
          System.out.println("**********************************************");
          boolean inputCorrect = false;
               while (inputCorrect == false) {
                    try {
                         BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
                         System.out.print("Please enter your option and hit <ENTER>: ");
                         choice1 = inStream.readLine();
                         int c1 = Integer.parseInt(choice1);
                         System.out.println("\nYou have entered choice number: " + c1);
                         inputCorrect = true;
                    } catch (NumberFormatException nfe) {
                         System.out.println("You did not enter a valid choice number: " + "\""+ choice1 + "\" is not in the list!!");
                         inputCorrect = false;
                    return choice1;
     public String inputNumber2() throws IOException {
          boolean inputCorrect = false;
               while (inputCorrect == false) {
                    try {
                         BufferedReader br2 = new BufferedReader (new InputStreamReader(System.in));
                         System.out.print("\nPlease enter another number you want to do the calculation with and hit <ENTER>: ");
                         num2 = br2.readLine();
                         double n2 = Double.parseDouble(num2);
                         System.out.println("\nThe second number you have entered is: " + n2);
                         System.out.println("\nYour numbers are: " + num1 + " and " + num2);
                         inputCorrect = true;
                    } catch (NumberFormatException nfe) {
                         System.out.println("You did not enter a valid number: " + "\""+ num2 + "\" is not a number!!");
                         inputCorrect = false;
                    return num2;
     public int Calculator() {
          int choice2 = (int) Double.parseDouble(choice1);
          switch (choice2) {
                    case 1 :
                         Add();
                         System.out.print("The answer of " + num1 + " + " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 2 :
                         Subtract();
                         System.out.print("The answer of " + num1 + " - " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 3 :
                         Multiply();
                         System.out.print("The answer of " + num1 + " * " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 4 :
                         Divide();
                         System.out.print("The answer of " + num1 + " / " + num2 + " is: " + decimals.format(answer));
                         Modulus();
                         System.out.print(" and the remainder is " + decimals.format(answer));
                         break;
                    case 5 :
                         maximumValue();
                         System.out.println("The maximum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
                         minimumValue();
                         System.out.println("The minimum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 6 :
                         Squareroot1();
                         System.out.println("The squareroot of value " + num1 + " is: " + decimals.format(answer));
                         Squareroot2();
                         System.out.println("The squareroot of value " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 7 :
                         absoluteNumber1();
                         System.out.println("The absolute number of " + num1 + " is: " + decimals.format(answer));
                         absoluteNumber2();
                         System.out.println("The absolute number of " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 8 :
                         octalEquivalent1();
                         System.out.println("The octal equivalent of " + num1 + " is: " + octalEquivalent1());
                         octalEquivalent2();
                         System.out.println("The octal equivalent of " + num2 + " is: " + octalEquivalent2());
                         hexadecimalEquivalent1();
                         System.out.println("\nThe hexadecimal equivalent of " + num1 + " is: " + hexadecimalEquivalent1());
                         hexadecimalEquivalent2();
                         System.out.println("The hexadecimal equivalent of " + num2 + " is: " + hexadecimalEquivalent2());
                         break;
                    case 9 :
                         Round1();
                         System.out.println("The rounded number of " + num1 + " is: " + decimals.format(answer));
                         Round2();
                         System.out.println("The rounded number of " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 0 :
                         if (choice2 == 0) {
                              System.exit(1);
                         break;
               return choice2;
          public String anotherCalculation() throws IOException {
               boolean inputCorrect = false;
               while (inputCorrect == false) {
                         try {
                              BufferedReader br3 = new BufferedReader (new InputStreamReader(System.in));
                              System.out.print("\nWould you like to do another calculation? Y/N ");
                              more = br3.readLine();
                              String s1 = "y";
                              String s2 = "Y";
                              if (more.equals(s1) || more.equals(s2)) {
                                   inputCorrect = true;
                                   while (inputCorrect = true){
                                        inputNumber1();
                                        System.out.println("");
                                        calculatorChoice();
                                        System.out.println("");
                                        inputNumber2();
                                        System.out.println("");
                                        Calculator();
                                        System.out.println("");
                                        anotherCalculation();
                                        System.out.println("");
                                        inputCorrect = true;
                              } else {
                                   System.out.println("\n" + nameSurname + " thank you for using this program, you have used this program for: " + decimals.format(programRuntime()) + " seconds");
                                   System.out.println("the program will now exit, Goodbye.");
                                   System.exit(0);
                         } catch (IOException ex){
                              System.out.println("You did not enter a valid answer: " + "\""+ more + "\" is not in the list!!");
                              inputCorrect = false;
          return more;
     public static void main(String[] args) throws IOException {
          Project p1 = new Project();
          p1.insertNameAndSurname();
          System.out.println("");
          p1.inputNumber1();
          System.out.println("");
          p1.calculatorChoice();
          System.out.println("");
          p1.inputNumber2();
          System.out.println("");
          p1.Calculator();
               System.out.println("");
               p1.anotherCalculation();
               System.out.println("");
{code}
*Can you please run my code for yourself and have a look at how this program is constructed*
*and give me ANY feedback on how I can better this code(program) or if I've done anything wrong from your point of view.*
Your help will be much appreciated.
Thanks in advance

Smirre wrote:
Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??You cannot restrict the user. It is a sad fact in programming that the worst bug always sits in front of the Computer.
What you could do is checking the input string for numbers. If it contains numbers, just reprompt for the Name.
AND you might want to ask yourself why the heck a calculator needs to know the users Name.

Help with Internet Settings for Blackberry Curve 8520 On Orange Pay-Monthly

I need help with my internet settings I'm currently on Orange Pay-Monthly and have recently bought a second hand Blackberry Curve 8520 which is unlocked but used to be on 02! I don't have a clue on what to do or where to start all I know is in the top right hand corner where the signal bar is it says GPRS and WIFI ! I don't want WIFI as I don't have a wireless connection and would like to get the settings for my curve so I can browse the internet and go on Facebook etc and BBM!! I've clicked on the internet logo in the menu bar but it just say's hotspot browser.. but wont let me browse!! Some one please help me !!

Hey BaByPaW1990,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
You can get your APN settings from your network service provider, also make sure you have a BlackBerry data plan.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Help with print settings for Panoramas

Hi,
I use an Epson 2880 and I am trying to figure out the print settings for doing an 11 x 34in panorama print on 13" roll paper from Aperture 3.0.3. I finally got it to do one print properly, but the setup was totally counter intuitive and I can't reproduce it. I tried using "Custom" Paper size and setting it to 13" x 36", then using the landscape mode and setting the Image Size to 11 x 34". Any way I did this ended up with the image printing the wrong way on the paper. So I went back and picked "Roll" paper. This leaves only one field to fill in, which I presume is the paper width (it really didn't make this obvious in the dialogue.). Then I set the mode to Portrait, and made sure that the settings for the Image size were 11 x 34. It then printed fine. But when I went back to print another file, even though I had saved the settings, now I am presented with only one box for specifying the Image Size and there is no way to get it right again. HELP! The settings for this kind of print in Photoshop is also counterintuitive, but when you get it set right, and you know the settings, no problem reproducing it. I think maybe there is a bug in AP3 with regard to this sort of setup.

Hey BaByPaW1990,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
You can get your APN settings from your network service provider, also make sure you have a BlackBerry data plan.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Help with EasyLink Advisor for WRT54GS

Similar Messages

Maybe you are looking for