Help with editing a template flash file..

FIRST OFF..please don't shoot the noobee..I know some folks
don't like the templates and I appreciate that.
I have done some reading but not a whole lot about Flash. I
certainly don't want to BUILD a flash (not yet), but want to edit
one that is included in a template. I only want to edit the header
that drops down. It says The Web STudio. I, for example, want it to
say Marks Studio.
Ok..the temp comes with Flash/non flash.
I open w/flash and have a 3 folders: flash, psd and html.
-flash folder has Images, fla doc and one flash html file
-PSD folder has 3 psd files
-html folder has flash folder, images folder, css file and
one single index.html file.
I opened the flash folder and found the image.jpg I wanted to
change to Marks studio.
I opend the PSD and found the slice that is the same as that,
then edited it like I want it in PSD, then saved to replace the old
image. top1. jpg
Still, it is the same ole one that came with the temp.
as I said, please don't shoot the noobe. I just wanna edit
the flash file.
Thanks for any help.
Mark

You'd need Flash to edit the FLA file.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"snipingkid" <[email protected]> wrote in
message
news:enev5r$p8l$[email protected]..
> Hey guys,
>
> I need some help with editing a flash template, I have
the .swf, .fla, and
> .html file of this thing, I would like however to edit
something on it....
> Ive
> tried everything, I have access to photoshop and
dreamweaver 8... Im not
> any
> good at it but with decent help I could get something
done. What I would
> like
> to edit is just text that flies in.... I would like to
edit the text, how
> do I
> do it.... Thanksj
>

Similar Messages

Help with adding music to flash file

I'm working on designing a flash file that I will upload to a
web site I'm designing. I have original music that I want to upload
to it, but the sound is coming across as garbled. I ripped the
music off a CD so the file I am importing into Flash is .wav file.
The sound is fine when run my compueter, but it sounds aweful when
I import it into Flash. Can I add a .wav file to flash, or would I
be better off using an mpeg or mp3 file? Does it matter which type
of file I use to get the best sound quality?
Once I get the correct file imported to the library, how
should I go about applying it to the flash document? Should I
simply drop it into a new group of frames like I would any other
file, or is there a better way to implement it? I am not worried
about the user having control of it, in fact, I don't want them to
be able to turn off the sound.
Any suggestions and comments would be helpful, thanks

TDW1181 wrote:
> I'm working on designing a flash file that I will upload
to a web site I'm
> designing. I have original music that I want to upload
to it, but the sound is
> coming across as garbled. I ripped the music off a CD so
the file I am
> importing into Flash is .wav file. The sound is fine
when run my compueter, but
> it sounds aweful when I import it into Flash. Can I add
a .wav file to flash,
> or would I be better off using an mpeg or mp3 file? Does
it matter which type
> of file I use to get the best sound quality?
You can add wav file to flash, even preferred over mp3 file.
> Once I get the correct file imported to the library, how
should I go about
> applying it to the flash document? Should I simply drop
it into a new group of
> frames like I would any other file, or is there a better
way to implement it? I
> am not worried about the user having control of it, in
fact, I don't want them
> to be able to turn off the sound.
The bad quality is a result of compression you use for that
sound upon export.
After import, open the library CTRL L , right click the sound
and go to properties.
Try to change the mp3 export quality, use the TEST button for
immediate try, also monitor
the increase in file size at the bottom of the screen. The
better the quality, the
larger the file will be.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Help with editing buttons in flash

I have dreamweaver 8 and flash 8 and i need to add content to
the nav bar that was made in flash 8....when i do edit and export
back to dreamweaver it doesn't acknowledge the change even when i
refresh....or close the program and manually take out the
files....what am i doing wrong???
undesirable#1

I'm totally confused - i think it is your terminology - when
you say things like "window" - it is
very hard to tell what you mean. "Window" can refer to so
many different things. Then you say things
that popup at first glance can't be seen - even more
confusing. When you say "when I open the window
more..." what "window" are we talking about? Are you
previewing in a browser? Or is this inside the
DW IDE? Or the Flash IDE?
It's probably a very simple solution but I can't figure out
what you are physically looking at, what
it looks like now, and what it should look like based on your
workflow.
sorry - trying to help.
Chris Georgenes
Adobe Community Expert
mudbubble.com
keyframer.com
howtocheatinflash.com
undesirablenumberone wrote:
> just to stating the obvious, ....i'm a total novice.
>
> i'm using the same file from dreamweaver, just renaming
it....then i change
> the placeholder to correspond with the new file...then i
save it and
> refresh....I notice that when i preview it in flash that
as a flash item, when
> the window with the nav bar in it pops up at first
glance you don't see it, but
> if i open the window more then the text is there ...but
still doesn't show up
> in dreamweaver.......
>

Help with Editing Raw in Lightroom 3.6

Hello everyone!
I am new to the forum and also to using lightroom. I just need some help with editing my RAW files. I shoot in RAW + JPEG and I just imported the files to lightroom. It didn't show me the jpeg files for importing so I only imported the RAW files, which I needed. After editing, I realised it said CR2+JPEG. Which means that both files were imported but combied into a single one. Now I basically want to edit my RAW files only. Does that mean I have edited a jpeg or a mixture of both files? How to edit only the RAW file?
If my picture says CR2+JPEG, does that mean it isnt a pure RAW file and the editing would affect the image quality?
I will really appreciate some help!

It imported both, but only shows you the raw file. Ever. What you see and what you edit will only be the raw file. The associated JPG file will follow the raw file around if you move it or rename it using Lightroom, but other than that, Lightroom will ignore it. You could safely delete the JPG, and Lightroom wouldn't complain--probably wouldn't even notice.
There's a preference you can set that will cause JPGs to be imported as separate images. Then you'd be able to see both of them and edit them separately. That preference won't take effect on images that are already in the catalogue, but will affect all future imports.
Hal

Need help with editing flash

Hello everyone, I'm really new to flash and I have some problems with editing my flash file. Currently, I have a small flash application in a folder, containing various kinds of files such as AS, SWF, FLA, HTML. What I want to do is to change the text inside one of the buttons in the application. After doing some reasearching, I realized that I should probably make some changes to the FLA file(Quiz.fla for example) since Quiz.fla is the only FLA file in the folder. Therefore, I opened it using Adobe Flash CS5.5, what what I found out is that the Quiz.fla file is really different from other FLA files. It only shows a plain background when I open it, without showing the actual interface of the flash application. It does contain all the buttons and contants under the Library section on the right side of Adobe Flash . When I try to change the text inside the button then save-publish, the newly published SWF file would just be a static picture of the button I've changed and everything else is gone. Any help is greatly appreciated!

ya, that's why I'm confused. I've actually tried editing some sample flash FLA files and all I need to do is to edit them in the Library and it would work out. But this one seems to have some weird problems. I could actually send the application folder to you if you have some time to take a look at it. Thank you very much again for the help!

Need help converting quicktime movies into Flash files

I need to convert a QT, PhotoJPEG compressed, movie file into a .flv format. I have AE 6.5 Standard and it keeps quitting on exporting a SWV file which would could probably get me by with my client. But, again, it errors out saying something like a JPG is busy, or a file is busy.
I have FlipforMac,a purchased version. But I'm not sure if converting it into a .wmv and then a Flash file is the best route or is even possible.
Any suggestions or ideas of software that I could purchase??
~reicko

i don't think you have read up on the use of flash video
(FLV). there's nothing you need that you do
not already have (except maybe quicktime pro or some other
video editing program). the FLV exporter
comes FREE with flash 8. You should be able to open your
quicktime movie in QT PRO and export to FLV
format - then use any of the flash playback components for
FLV files - best bet is to read the help
docs on this subject and go to the devnet section of
adobe.com where there are several in-depth
articles about implementing flash video into your site.
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
rhian wrote:
> Hi,
> Thanks for your reply. I am using Flash 8. I've been
looking into streaming
> and it's very expensive with quicktime movies, however
I've found a company
> that will stream flash movies much more cheaply which is
why I want to convert
> it to a flash movie.
>
> Sorry are you say that Quicktime Pro allows you convert
files into flash
> formats?
> Rhian
>

Need Help To Extract Logo from Flash File .swf

I have an attached Flash file that is in
.swf format. There is a N64 logo within this file that I'm
trying to extract as a
.png with a transparent background. I've been able to open
it in a program called
Flash Decompiler Trillix and in the sub-menus it has the
logo listed as a frame.
This is about as far as I have gotten and I'm stuck. Perhaps
someone else knows how to do this a little easier. I just need to
find a way to extra the logo that already has a transparent
background and save it in
.png format.
Any help here would be hot." ;)
Logo Flash
File .swf

Hello,
I ran into a similar problem a few months ago. I have the
Sothink Flash Decompiler and what I did was turn the SWF back into
a FLA. I then opened it in Flash and then exported what I wanted as
a PNG image.
Decompilers can extract the actual image whether it be jpeg,
gif, png, etc. But when it's listed as a frame(as you mentioned
above) then the method above is probably the best way to get it.
Good luck

Help with importing items into flash

OK, I have modified a flash site to accomplish everything I
would like except one item and this has me stumped. I have several
"more" buttons on my site that all go to the same frame, but insert
differnent text dependent on which "more" button is clicked
(reference
www.tlcbuildersllc.com).
Everything is imported from xml functions and files.
Here is the xml function script from one file
(xmlFunctions.as) for the "more" buttons
function more_click_func(number) {
num=_root.pagesReadMoreFrame;
currentPage=_root.link-_root.firstPageFrame;
if(_root.link<>num and _root.animation==1) {
_root.animation=0;
_root.link_prev=_root.link;
_root.menu["item" +
getMenuPreviousLink(_root.link)].gotoAndPlay("s2");
_root.menu2["item" +
getMenuPreviousLink(_root.link)].gotoAndPlay("s2");
if (number==999999) {
sectionNum=getXmlSection(mainObj, "section",
"privacyPolicy");
titleNum=getXmlSection(mainObj.section[sectionNum], "item",
"pageTitle");
textNum=getXmlSection(mainObj.section[sectionNum], "item",
"pageText");
_root.readMoreTitle=mainObj.section[sectionNum]["item"][titleNum].value;
_root.readMoreText=mainObj.section[sectionNum]["item"][textNum].value;
else {
sectionNum=getXmlSection(mainObj, "section", "pages");
linkCount=checkLinkType("readMoreLink", number);
i=0;
linkTitleNum=getXmlSection(mainObj["section"][sectionNum]["page"][currentPage]["link"][li nkCount],
"item", "title");
linkTextNum=getXmlSection(mainObj["section"][sectionNum]["page"][currentPage]["link"][lin kCount],
"item", "linkText");
_root.readMoreTitle=mainObj["section"][sectionNum]["page"][currentPage]["link"][linkCount ]["item"][linkTitleNum].value;
_root.readMoreText=mainObj["section"][sectionNum]["page"][currentPage]["link"][linkCount] ["item"][linkTextNum].value;
_root.link=num;
_root.play();
which calls items out of another file (tfile_main.xml) with
script like this
<pageText><![CDATA[
LATEST PROJECTS?
]]></pageText>
<pageText><![CDATA[
<font color="#FFFFFF">12.15.2007</font>
text omitted to shorten post <u><font
color="#FFFFFF"><a
href="asfunction:_root.more_click_func,0">more</a></font></u>
<link linkType="readMoreLink">
<item name="title"><![CDATA[
Latest Project
]]></item>
<item name="linkText"><![CDATA[
text omitted to shorten post]]></item>
</link>
Then, in the flash file (main.fla), on a layer of the read
more frame, I have this script
thisTitle.htmlText=_root.readMoreTitle;
thisText.htmlText=_root.readMoreText;
_root.textSelectable(thisText);
_root.textSelectable(thisTitle);
Now I know the above script is for text boxes, but I figure a
similar layer or MC script will be needed to add unique avi files
and pics for each individual "more" button that is selected. Any
help would be appreciated, I have tried many different things and
have not been able to accomplish this task.

Hi Andy,
Please put this posting into the appropriate SAP Netweaver group.
SAP TM is about transportation of physical goods from one location to another.
Regards, Thomas

Help with Editable Regions

We are in the process of creating a template for our site. We
are working on the editable regions. What we are finding is if we
want to add a bulleted list of items (let's say links) we can't do
it without the list header also becoming bulleted. For instance
let's say we have the following:
Medical Resource Links
Cardiology
GI
Respiratory
We would want Medical Resource Links to be bold and stay to
the left. The other three items we would want to have bullets.
When we try this in an editable region all four items move
over and only the first gets the bullet. Do we need an additional
editable region for the title? Is this controlled via a CSS? Any
help you can give would be greatly appreciated. We are beginners
with this. Thanks.

This has nothing to do with editable regions. It's all about
the HTML on
the page.
Show us the HTML for your list, and I'll tell you why it's
happening the way
you describe.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"DONNA6985" <[email protected]> wrote in
message
news:edme63$o0m$[email protected]..
> We are in the process of creating a template for our
site. We are working
> on
> the editable regions. What we are finding is if we want
to add a bulleted
> list
> of items (let's say links) we can't do it without the
list header also
> becoming
> bulleted. For instance let's say we have the following:
>
> Medical Resource Links
> Cardiology
> GI
> Respiratory
>
> We would want Medical Resource Links to be bold and stay
to the left. The
> other three items we would want to have bullets.
> When we try this in an editable region all four items
move over and only
> the
> first gets the bullet. Do we need an additional editable
region for the
> title?
> Is this controlled via a CSS? Any help you can give
would be greatly
> appreciated. We are beginners with this. Thanks.
>

Help With a earth spinn flash site

Hy all and I hope I am no too stupid... but I am not realy
sure what to do with .... I have a flash earth spinning but it is
not look like a spinn...Can I aply a lens or distort somehow the
image? it's look more a drag or smth... can anyone help me? I give
the source if someone want... mail please at
[email protected] or messenger id... Thanx

I doubt anybody will be able to help you specifically with
that template.
I have looked at it, and it is not something I would
recommend using, by any means.
From the general point of view of this forum's user, I can
safely say that this it is a very bad
template. That point of view is not based on how the template
looks, but on how it works, good
coding practices, accessibility, and web-design /
web-development common sense.
Flash navigation is a bad idea.
Slice-centric layout is a bad idea.
music playing in the background is a bad idea.
Pretty much everything about this template will make a
web-designer scream and run away as fast as
possible.
Then there is nothing wrong with using such template if you
have no intention whatsoever to learn
how to build web pages by yourself, use healthy coding
practices, and in the process to learn what
makes an accessible, valid, useful web page/site.
IF you really want to use this template, there might be a
forum dedicated to these templates on
monstertemplate.com, you might want top ask your questions
there.
Else, forget about this template, start afresh your own page
layout in Dreamweaver, create your
graphic elements in Photoshop, and come back here to get help
with that process.
seb ( [email protected])
http://webtrans1.com | high-end web
design
Downloads: Slide Show, Directory Browser, Mailing List

Please help with opening old mac AE file on a pc

Hi,
With the latest version of AE on a pc I tried opening older mac version .aep file created I believe in 1999. I had very little hope so I wasn't surprised to see this message:
"After Effects error: this file was created with an older version of After Effects [3.0 (Macintosh PPC)], and can’t be opened. You can convert this file using an older version of After Effect and resaving."
It is not clear which version should be used, Pc or Mac, and if at the end that file could eventually be opened in thet latest AE on a pc.
I will greatly appreciate any help with this.

Thanks Mylenium
Rebuilding is not an option. It is a lot of work and I need this as a portfolio item. I created a promotional interactive CD with Macromedia Director in 1999 for a sign company. I created 19 short animations for it with After Effects 3 using old PPC Mac. I haven't used After effects since then but recently several new clients asked me if I can make animations from that nature. So, I'm trying to use my old work as a demonstration of my creative skills. The problem is that the animations were rendered tiny with 309 x 228 pixels to fit in the interactive interface of the presentation intended for the small monitors used at that time. I took the animations from the interactive CD and using the latest AE on a pc, I created a rough composition with running the animations one after another. To make the animations a bit larger I scaled most of them to 320 x 240 hoping it will look better.
In my archives I have the project files and all .ai vector graphics used for the animations. I still have the old PPC Mac retired somewhere in the closets and installer CD with After Effects 3 and 4. I thought it would be great if I can somehow open the files in the latest version on a pc but if not I guess I have to take out that old mac are render to higher resolution using this ancient machine and AE version. And I'm wondering if all this is worth it.
I will appreciate any tips, advices, things to be aware, etc, and how to make this looks better on YouTube.
Oh, and another question by the way, I haven't been current to the animation software for a long time and wonder if this kind of presentational animations are best suited for creating with Flash or After Effects is still OK?

I need help with shooting in my flash game for University

Hi there
Ive tried to make my tank in my game shoot, all the code that is there works but when i push space to shoot which is my shooting key it does not shoot I really need help with this and I would appriciate anyone that could help
listed below should be the correct code
//checking if the space bar is pressed and shooting is allowed
if(evt.keyCode == 32 && shootAllow){
    //making it so the user can't shoot for a bit
    shootAllow = false;
    //declaring a variable to be a new Bullet
    var newBullet:Bullet = new Bullet();
    //changing the bullet's coordinates
    newBullet.y = tank_mc.y + tank_mc.width/2 - newBullet.width/2;
    newBullet.x = tank_mc.x;
    //then we add the bullet to stage
    addChild(newBullet);
listed below is my entire code
import flash.display.MovieClip;
    //declare varibles to create mines
//how much time before allowed to shoot again
var cTime:int = 0;
//the time it has to reach in order to be allowed to shoot (in frames)
var cLimit:int = 12;
//whether or not the user is allowed to shoot
var shootAllow:Boolean = true;
var minesInGame:uint;
var mineMaker:Timer;
var cursor:MovieClip;
var index:int=0;
var tankMine_mc:MovieClip;
var antiTankmine_mc:MovieClip;
var maxHP:int = 100;
var currentHP:int = maxHP;
var percentHP:Number = currentHP / maxHP;
function initialiseMine():void
    minesInGame = 15;
    //create a timer fires every second
    mineMaker = new Timer(6000, minesInGame);
    //tell timer to listen for Timer event
    mineMaker.addEventListener(TimerEvent.TIMER, createMine);
    //start the timer
    mineMaker.start();
function createMine(event:TimerEvent):void
//var tankMine_mc:MovieClip;
//create a new instance of tankMine
tankMine_mc = new Mine();
//set the x and y axis
tankMine_mc.y = 513;
tankMine_mc.x = 1080;
// adds mines to stage
addChild(tankMine_mc);
tankMine_mc.addEventListener(Event.ENTER_FRAME, moveHorizontal);
function moveHorizontal(evt:Event):void{
    evt.target.x -= Math.random()*5;
    if (evt.target.x >= stage.stageWidth)
        evt.target.removeEventListener(Event.ENTER_FRAME, moveHorizontal);
        removeChild(DisplayObject(evt.target));
initialiseMine();
    //declare varibles to create mines
var atmInGame:uint;
var atmMaker:Timer;
function initialiseAtm():void
    atmInGame = 15;
    //create a timer fires every second
    atmMaker = new Timer(8000, minesInGame);
    //tell timer to listen for Timer event
    atmMaker.addEventListener(TimerEvent.TIMER, createAtm);
    //start the timer
    atmMaker.start();
function createAtm(event:TimerEvent):void
//var antiTankmine_mc
//create a new instance of tankMine
antiTankmine_mc = new Atm();
//set the x and y axis
antiTankmine_mc.y = 473;
antiTankmine_mc.x = 1080;
// adds mines to stage
addChild(antiTankmine_mc);
antiTankmine_mc.addEventListener(Event.ENTER_FRAME, moveHorizontal);
function moveHorizontal_2(evt:Event):void{
    evt.target.x -= Math.random()*10;
    if (evt.target.x >= stage.stageWidth)
        evt.target.removeEventListener(Event.ENTER_FRAME, moveHorizontal);
        removeChild(DisplayObject(evt.target));
initialiseAtm();
function moveForward():void{
    bg_mc.x -=10;
function moveBackward():void{
    bg_mc.x +=10;
var tank_mc:Tank;
// create a new Tank and put it into the variable
// tank_mc
tank_mc= new Tank;
// set the location ( x and y) of tank_mc
tank_mc.x=0;
tank_mc.y=375;
// show the tank_mc on the stage.
addChild(tank_mc);
stage.addEventListener(KeyboardEvent.KEY_DOWN, onMovementKeys);
//creates the movement
function onMovementKeys(evt:KeyboardEvent):void
    //makes the tank move by 10 pixels right
    if (evt.keyCode==Keyboard.D)
    tank_mc.x+=5;
//makes the tank move by 10 pixels left
if (evt.keyCode==Keyboard.A)
tank_mc.x-=5
//checking if the space bar is pressed and shooting is allowed
if(evt.keyCode == 32 && shootAllow){
    //making it so the user can't shoot for a bit
    shootAllow = false;
    //declaring a variable to be a new Bullet
    var newBullet:Bullet = new Bullet();
    //changing the bullet's coordinates
    newBullet.y = tank_mc.y + tank_mc.width/2 - newBullet.width/2;
    newBullet.x = tank_mc.x;
    //then we add the bullet to stage
    addChild(newBullet);
if (tank_mc.hitTestObject(antiTankmine_mc))
        //tank_mc.gotoAndPlay("hit");
        currentHP -= 10;
        // remove anti tank mine
        removeChild(antiTankmine_mc);
if (tank_mc.hitTestObject(tankMine_mc))
        //tank_mc.gotoAndPlay("hit");
        currentHP -= 10;
        // remove anti tank mine
        removeChild(tankMine_mc);
    //var maxHP:int = 100;
//var currentHP:int = maxHP;
//var percentHP:Number = currentHP / maxHP;
    //Incrementing the cTime
//checking if cTime has reached the limit yet
if(cTime < cLimit){
    cTime ++;
} else {
    //if it has, then allow the user to shoot
    shootAllow = true;
    //and reset cTime
    cTime = 0;
function updateHealthBar():void
    percentHP = currentHP / maxHP;
    healthBar.barColor.scaleX = percentHP;
    if(currentHP <= 0)
        currentHP = 0;
        trace("Game Over");
    updateHealthBar();

USe the trace function to analyze what happens and what fails to happen in the code you showed. trace the conditional values to see if they are set up to allow a shot when you press the key

Help with exporting Deski to text file via Web Intelligence

We are currently converting from BO version 5 to BO XI rev2. I have a report that must be scheduled to a flie in plain text format. I am using a deski report. When I save as to text, the file is fine. When I schedule it in webi, the file seems to be missing the end of line character for each row in the table, so it cannot be used for an import to another program. Can anybody help with this?-

well, in that case you need to determine if this issue only happens with a perticular report or all of them, if it happens only with reports imported from 5.x or with newly created reports as well.
Looks like it is happening only when report is exported from Infoview, not in the Deski client. This might indicate a problem at the Web Apllication server (tomcat or one you use).
If this issue is happening with any report - it might be a bug. In that case you have no options as there are no more patches for XIR2.
On the other hand - if all you need is to extract data for consumption in another tool , why not use Data integrator instead ?
Also, if this desn't work in Deski - does it work if you convert your reports to webi and export from those ?

Help with Photo Gallery using XML file

I am creating a photo gallery using Spry. I used the Photo Gallery Demo (Photo Gallery Version 2) on the labs.adobe.com website. I was successful in creating my site, and having the layout I want. However I would like to display a caption with each photo that is in the large view.
As this example uses XML, I updated my file to look like this:
<photos id="images">
            <photo path="aff2010_01.jpg" width="263" height="350" thumbpath="aff2010_01.jpg" thumbwidth="56"
               thumbheight="75" pcaption="CaptionHere01"></photo>
            <photo path="aff2010_02.jpg" width="350" height="263" thumbpath="aff2010_02.jpg" thumbwidth="75"
               thumbheight="56" pcaption="CaptionHere02"></photo>
            <photo path="aff2010_03.jpg" width="350" height="263" thumbpath="aff2010_03.jpg" thumbwidth="75"
               thumbheight="56" pcaption="CaptionHere03"></photo>
</photos>
The images when read into the main file (index.asp) show the images in the thumbnail area and display the correct image in the picture pain. Since I added the pcaption field to the XML file, how do I get it to display? The code in my index.html file looks like this:

rest of the code here:
        <div id="previews">
            <div id="controls">
                <ul id="transport">
                    <li><a href="#" class="previousBtn" title="Previous">Previous</a></li>
                    <li><a href="#" class="playBtn" title="Play/Pause" id="playLabel"><span class="playLabel">Play</span><span class="pauseLabel">Pause</span></a></li>
                    <li><a href="#" class="nextBtn" title="Next">Next</a></li>
                </ul>
            </div>
            <div id="thumbnails" spry:region="dsPhotos" class="SpryHiddenRegion">
                <div class="thumbnail" spry:repeat="dsPhotos"><a href="{path}"><img alt="" src="{thumbpath}"/></a><br /></div>
                <p class="ClearAll"></p>
            </div>
        </div>
        <div id="picture">
            <div id="mainImageOutline"><img id="mainImage" alt="main image" src=""/><br /> Caption: {pcaption}</div>
        </div>
        <p class="clear"></p>
    </div>
Any help with getting the caption to display would be greatly appreciated. The Caption {pcaption} does not work,

Help with editing a cell in a JTable. DESPERATE

Hi! Is there someone out there that could help with some source code for editing a cell in my JTable when I run it as an applet??
It works fine when I run it as an application.
I manage to select the row and write a number in it, but I can't get out of the cell (it seems that the program stops??). I want to enter an integer in a cell and when I click enter or with the mouse in an other cell the value that I enter should update some other cell( multiply the entered value with some fixed number and update a cell in a second coloumn)
I am really desperate now..... I have thought about using a MouseListener....
I am using a tablemodel that is from AbstractTableModel.

Are you using some cell editors?
While converting inside them, you might be getting some exceptions (like parseexception)which is stopping you from proceeding further.
Are you using your own tablemodel with custom datatypes?
Hope this helps,
Ramkumar

Help with editing a template flash file..

Similar Messages

Maybe you are looking for