Help with email settings..please

Hi, first i would like to apologise if this question is really lame! but here goes. I just bought the 8120 and followed the setup wizard. When it came to the email set up i pressed blackberry enterprise server option. Now i have mostly figured this phone/ blackberry out but i cant access or send emails. I assume its something to do with this email set up. Now firstly how do i get this activation password i need and is this the reason for my problems? Secondly should i have gone with the first option and if so how do i get back to it? Thanks in advance, Ann.

As you said you just bought BlackBerry I assume that you've subscriberd for BlackBerry Internet Service (BIS) which provides integration of 10 POP/IMAP mail. In such case look for the icon Email Setting on your application screen instead of Setup Wizerd. Setup Wizerd requires you to have BES server and integration of mail from your corporate domain.
Accessing email setting icon will lead you to step by step of personal mail integration.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Similar Messages

TS3899 help with email account please

help! getting "cannot get mail" message on IPhone, IPad and my Mac. COX is my email provider and reset my password- still getting same message- do I have to delete email accounts on all three devices and add it again? Checking email on COX account 4 now

This issue is often caused by an incorrect password. Be sure you have entered the correct password. If you have enabled two-step verification through your e-mail service provider, please contact them to see if you need a special password for your iOS device.
If not, try deleting the account and then add it back with the new password.

Help with Privacy settings please

I have added my Home phone number to my contacts.
If I set Privacy to "Allow calls from Anyone to my Skype Number" and "block calls when phone number is hidden", then I can receive calls from Home OK. And it recognises the number as Home (it tells me one missed call from Home for instance)
BUT: if I set privacy to "only receive calls from numbers in my Contacts" then Skype rejects calls from my Home number (it rings once then gives the busy signal).
Can anyone help please - I am stumped since Skype recognises my Home as a Contact, the number is not hidden, but Skype will not accept the calls if Privay is set to Only receive calls from Contacts.
Solved!
Go to Solution.

Try to reset Skype Settings
http://community.skype.com/t5/Windows/Skype-auto-logs-off/m-p/938210/highlight/true#M69026
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

Help with video settings please! videos will not play but audio of the vid

Hey..i have the 30GB ipod video. i have alot of music videos on there which are under the category movies on my ipod. i turned my ipod on about three weeks ago and none of the movies would play. they all appear as thumbnails. the thumbnails dont move but the audio of the movie does play. the thing that has happend is that somehow all my songs have come into the video playlist and i dont know how this has occured. i cannot plug my ipod to my computer as my computer no longer works. and if i plug it into my laptop then the songs and movies and photos will be earsed. i really want my videos to work again i just dont know how the settings have changed themselves.. is there any chance anybody knows how to get the videos to work again? if you require more information please let me know..the video settings are as follows: tv out - off, tv signal - PAL, widescreen - off. Also if i want to back up everything on my ipod how do i go abouts doing this so that i do not lose the data on it? thank you..chandni

same sentiment of mine...
my vids wont playu no more.. they're just stored in my music files..
i want them all back!!
pls help!!

Help with email address please and iTunes account

I have had a iTunes Account now for the last 4 years maybe more and I have a iTunes account that I used my email address which I have had for over 10 years, I I done the iPhone update for a iPhone 4 and it was telling me my password was incorrect it was also saying the same for my ipad4. I have tried and tried to recover my password from hotmail with NO luck what so ever the form comes back saying not enough info when I have filled in every question. I am going to have to make a new email address but can I chance my email and keep my same iTunes account or do I also need to make a new iTunes account? Thanks
Any help would be great

I would not create a new Apple ID as this will cause lots of confusion when you try to update the apps you've already purchased. Go to this Apple support page for Managing Your Apple ID and sign in, then search for how to change your email address. If you can't get it done contact Apple Support.
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/directToSignIn?loc alang=en_US

Need help with email settings btinternet

Hi, can anyone tell me what to put in for outgoing emails with btinternet.com?
I can get mail ok but cant recieve....any advice please? Thank you. Mo

Is ok, i've got it now.......

Help with security settings please?

I just downloaded HP 8500 wireless software and each time I start up the macair, i get an error message about an incorrect security setting. Where does one find this setting and change it?

When you searched Google for "iPhone Error 21" what did you find?

WRT310N: Help with DMZ/settings (firmware 1.0.09) for wired connection

Hello. I have a WRT310N and have been having a somewhat difficult time with my xbox 360's connection. I have forwarded all the necessary ports (53, 80, 88, 3074) for it to run, and tried changing MTU and what-not.
I don't know if I have DMZ setup incorrectly, or if it's my settings.
Setup as follows:
PCX2200 modem connected via ethernet to WRT310N.
The WRT310N has into ethernet port 1 a WAP54G, and then upstairs (so that my Mother's computer can get a strong signal) I have another WAP54G that I believe receives its signal from the downstairs 54G.
In the back of the WRT310N, I have my computer connected via ethernet port 3, and my Xbox 360 connected via ethernet port 4.
Now, I first figured I just have so many connections tied to the router and that is the reason for being so slow. However, when I unplug all the other ethernet cords and nothing is connected wirelessly, except for my Xbox connected to ethernet port 4, it is still poor. Also, with everything connected (WAP54G and other devices wirelessly) I get on my PC and run a speedtest. For the sake of advice, my speedtests I am running on my PC are (after 5 tests) averagely 8.5 Mbps download, and 1.00 Mbps upload, with a ping of 82ms.
Here is an image of the results:
http://www.speedtest.net][IMG]http://www.speedtest.net/result/721106714.png
Let me add a little more detail of my (192.168.1.1) settings for WRT310N.
For starters, my Father's IT guy at his workplace set up this WRT310N and WAP54G's. So some of these settings may be his doing. I just don't know which.
"Setup" as Auto-configurations DHCP. I've added my Xbox's IP address to the DHCP reservation the IP of 192.168.1.104. This has (from what I've noticed) stayed the same for days.
MTU: Auto, which stays at 1500 when I check under status.
Advanced Routing: NAT routing enabled, Dynamic Routing disabled.
Security: Disabled SPI firewall, UNchecked these: Filter Anonymous Internet Requests, Multicast, and Internet NAT redirection.
VPN passthrough: All 3 options are enabled (IPSec, PPTP, L2TP)
Access Restrictions: None.
Applications and Gaming: Single port forwarding has no entries. Port Range Forwarding I have the ports 53 UDP/TCP, 88 UDP, 3074 UDP/TCP, and 80 TCP forwarded to IP 192.168.1.104 enabled. (192.168.1.104 is the IP for my xbox connected via ethernet wired that is in DHCP reserved list)
Port Range Triggering: It does not allow me to change anything in this page.
DMZ: I have it Enabled. This is where I am a bit confused. It says "Source IP Address" and it has me select either "Any IP address" or to put entries to the XXX.XXX.XXX.XXX to XXX fields. I have selected use any IP address. Then the source IP area, it says "Destination:" I can do either "IP address: 192.168.1.XXX" or "MAC address:" Also, under MAC Address, it says DHCP Client Table and I went there and saw my Xbox under the DHCP client list (It shows up only when the Xbox is on) and selected it.
Under QoS: WMM Enabled, No acknowledgement disabled.
Internet Access Priority: Enabled. Upstream Bandwith I set it to Manual and put 6000 Kbps. I had it set on Auto before, but I changed it. I have no idea what to put there so I just put a higher number.
Then I added for Internet Access Priority a Medium Priority for Ethernet Port 4 (the port my xbox is plugged into).
Administration: Management: Web utility access: I have checked HTTP, unchecked HTTPS.
Web utility access via Wireless: Enabled. Remote Access: Disabled.
UPnp: Enabled.
Allow Users to Configure: Enabled.
Allow users to Disable Internet Access: Enabled.
Under Diagnostics, when I try and Ping test 192.168.1.104 (xbox when on and connected to LIVE), I get:
PING 192.168.1.104 (192.168.1.104): 24 data bytes
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
--- 192.168.1.104 data statistics ---
5 Packets transmitted, 0 Packets received, 100% Packet loss
Also, when I do Traceroute Test for my Xbox's IP, I just keep getting:
traceroute to 192.168.1.104 (192.168.1.104), 30 hops max, 40 byte packets
1 * * * 192.168.1.1 Request timed out.
2 * * * 192.168.1.1 Request timed out.
As for the Wireless Settings, it is all on the default settings with Wi-Fi Protected setup Enabled.
To add, I have tried connecting my modem directly to the Xbox and my connection is much improved. I have no difficulty getting the NAT open, for it seems my settings are working for that. Any help with these settings would be VERY much appreciated.
Message Edited by CroftBond on 02-18-2010 01:09 PM

I own 2 of these routers (one is a spare) with the latest firmware and I have been having trouble with them for over a year. In my case the connection speed goes to a crawl and the only way to get it back is to disable the SPI firewall. Rebooting helps for a few minutes, but the problem returns. All of the other fixes recommended on these forums did not help. I found out the hard way that disabling the SPI Firewall also closes all open ports ignoring your port forwarding settings. If you have SPI Firewall disabled, you will never be able to ping your IP from an external address. Turn your SPI Firewall back on and test your Ping.
John

Help with access control please

So I'm trying to set up my brother's PSP to the wirless network through MAC address timed access. What I want to do is make it so that he can only access it through certain times in the day. I'm having troubles with actually getting it to work. Everytime I set it up, the PSP only show's up as a DHCP client and not a Wireless client. I tried the option panel with the add wireless clients through the first try access. Could I get some help with this issue please? Thanks!

Just to calm your fears... There is no conspiracy. If someone had an answer or a suggestion they would post it.

I would need help with the following please: I need to save some of my email on a disk. I was going to Print, then Save PDF but then I am stuck. Help please. Thanks. Elisabeth

I would need help with saving some eamil messages to a disk to unclutter my email. How can I do this please?
Thanks.
Elisabeth

Open the email and then from the File menu select Save As Rich Text Format. That'll save it to open in TextEdit. If you want a pdf then open the email and do command-p (Print) and then from the PDF drop down box lower left corner select Save as PDF.

Need help with export settings...Please

I am brand new to the camera I have but been using FCP for 6 years. The camera is a Panasonic HMC150 that records in the AVCHD codec. I have an Intel Imac 20 2.4 Ghz 4 gigs of ram. My audio/video settings for the sequence in FCP are as follows:
Sequence pre set: Apple pro Res 422 1920-1080 60i 48khz (footage is 1080 60i)
I Log and Transfer with no problem, edit no problem.
My question is when I go to export the finished sequence to Idvd or DSP, what settings do I use?
I have exported to quicktime movie file with "current settings" and I have had NO luck in compleely burning a DVD. Is this the correct setting? what is everyone else using? Any help would be greatly appreciated!

DVD is standard definition. You have to compress your HD material to SD first. Crack open the manual for Compressor or DVDSP and you'll get loads of valuable info. The first 30 or so pages of the DVDSP manual are quite informative, and easy to read.

Please help with email and synching

Hoping someone could help with my email!! I have my show filed messages to off. So, when I go in the hub and click my one email account, it shows all my filed emails, such as a folder named old mail. Now, I can fix this by clicking on the dropdown and click inbox, then it shows just my inbox and no filed messages. But if I get a text or FB and enter that in the hub, then click back in the email account it then shows all my filed messages. I just want to see my inbox and that is it! Why is this not working right? I'm on 10.1 and using Microsoft Exchange. I have my old mail being synced, but I don't want to see my old mail. It's literally thousands of emails. If I unsych old mail then it is fine...but if I want to file something to the old mail file, then the whole thing sychs again and shows all my filed messages.
I don't know why this is becoming so difficult, but I just can't continue with my email folder showing all of these folders I don't want to see. The email is hard enough without seeing a line of the body of the email and only the subject....this is making it even more crazy for me. I really want to stick it out....but not sure if I can...and I want to. Is this a bug or just the new way BB handles email. Assuming its a bug being I have filed messages not to be seen.

Finally, this plug-in is ready for beta testing on www.amazoncanvas.com
Thank you all who have participated in this program.

Help with Internet Settings for Blackberry Curve 8520 On Orange Pay-Monthly

I need help with my internet settings I'm currently on Orange Pay-Monthly and have recently bought a second hand Blackberry Curve 8520 which is unlocked but used to be on 02! I don't have a clue on what to do or where to start all I know is in the top right hand corner where the signal bar is it says GPRS and WIFI ! I don't want WIFI as I don't have a wireless connection and would like to get the settings for my curve so I can browse the internet and go on Facebook etc and BBM!! I've clicked on the internet logo in the menu bar but it just say's hotspot browser.. but wont let me browse!! Some one please help me !!

Hey BaByPaW1990,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
You can get your APN settings from your network service provider, also make sure you have a BlackBerry data plan.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Help with Option 3 please

A week ago I was on Option 1 but due to heavy use my speed was reduced to 15.7k/sec !.I was advised to upgrade to Option 3 which I promptly did and that was done on the 29th(last week).
My speed though is still 15k/sec and I cannot watch any streaming video or BBC News Channels etc
Would some kind gentleman please look into it for me and advise.......thankyou
Solved!
Go to Solution.

Hi Pete,
I am sorry for the delay in getting back to you. I picked your email up this morning and have dropped you a reply. I am pleased that you managed to sort this out, if you need any further help just let me know.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Help with mail installatioin please

could somebody please help with the installation of mail...I have had my mac for 7 months now, and can't use the mail application.
Somebody help please before I die?
thanks
n9mila

i don't understand...the whole outgoing thing!
my email address is in hotmail. k! I don't have a .mac account
explain this
"incoming Mail Server: The server where your mail waits for you to retrieve it. Also called a POP or IMAP server. Enter the address (name) of the mail server where your mail account resides, and where mail is stored. For example, mail.example.com."
and this
"Outgoing Mail Server: The server that sends your mail to its destination. Also known as an SMTP server. For example, smtp.example.com. To see the server in use by each mail account, choose Edit Server List from the Outgoing Mail Server pop-up menu."
sorry, I'm very slow to comprehending

Help with email settings..please

Similar Messages

Maybe you are looking for