Help with Epson 265 cant find epson driver only gutenprint!

I hope you can help - Epson are no help!
I have and Epson R265 - it does print but will not allow any other utility maintenance. This means I cannot check on cartridge ink levels, clean nozzles etc.
I have read and re-read all the instructions about not using the Gutenprint driver but cannot find any of the other Epson 'official' drivers here on my iMac despite installing them from Epson's site.
Please help!
Karen

Hi Karen and welcome to Apple Discussions.
Do you mean you can't find the drivers on your computer? The actual files are located in (user)/Library/Printers or in bootvolume/Library/Printers.
Which driver version are you using? _[According to Epson, the latest version is 6.10|http://esupport.epson-europe.com/ProductHome.aspx?lng=en-GB&data=wsMoc1iCh VFkpIJHxGzU002Fw3ewZInBGepzWqN4djOtqlEU003D&tc=6#7]_.
I did see this thread re how AppleGrapple had managed to get his R265 to work.
Let us know how it goes.
/p

Similar Messages

K7n2 Delta Ilrs "Windows Setup cant find hard drives" plzz help

hia guys i know this has been in many posts but my question isnt answerd im affraid ok here we go
im trying to get win XP sp2 installed on my new hard drive (ill get to why i have this new hard drive soon lol
1) boot the system and press Ctrl + F and setup an array (stripe) all says functional etc save and exit
2) put in the xp disk and boot
3) press f6 and install my sata drivers (i got off the main web site)
4) press enter to install windows
5) "windows setup cannot find any hard drives" ???????????
basicly i had ubuntu on my pc using an 80gb sata ii set to sata i all was good and fine i got bored and wanted windows back to play games again so i put in my xp disk and tryed to install it but it said cant find hard drives i thort i had killed the disk with the grub bootloader messing up the mbr so i got a new disk and re set the bios and cmos etc went to instal xp and the same problem remains
all my m8s dono wht to do nore do i were all stumped with this one as the new drive wont be recognized by windows
strange thing is when i put the 80gb back in ubuntu loads up fine (i only have 1 hard drive in at a time)
please help meeeeee
K7n2 Delta Ilsr
barton xp 2800 +
X700 ATI AGP
1.7 gb ddr 400 ram
80gb sata maxtor dimond max (ubuntu)
160gb sata maxtor dimond max (new)
bios "W6570MS V7.6 110703

Quote from: Qtip on 16-September-07, 10:17:09
Also, what are new MBs doing so that one doesnt have to deal with this annoying F-6 step? For some reason I think I heard new MBs dont require this F-6 step.
for his mobo, the drivers are absolutely necessary to be loaded when SATA HDD are used. that is due onboard sata controller.

Cant find audio driver for 3412TU

please help me..i cant find right audio for 3412TU...
plus i'm having prob with audio..even i plug mic n headphone,stil can hear sound...when i'm in mute, still can hear sound too..help me pls...thanx...

After installing Microsoft UAA driver from V3000t, if the Conexant still gives an error,check in Device Manager under System Devices to see if MS UAA installed properly.
There should be a listing for Microsoft UAA Bus Driver for High Definition Audio.
If not,you should have a PCI with yellow!.Right click it and Update Driver,No to Connect,No to Search and last Install Automatically.
Reboot to check status.
==============
If you have SP3 installed,you will need this UAA:
http://couponmeister.com/blog/HD_Audio/KB835221.exe
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

My daughters ipod touch says disabled. went on help, did the sync, cant find the asst that asks me to restore.

my daughters ipod touch says disabled. went on help, did the sync, cant find the asst that asks me to restore.

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Hi, I was wondering if anyone can help me because I cant find my external Hardrive on My Macbook Air running OSX Mavericks. If anyone could help me solve this it would be highly appreciated Thanks

Hi, I was wondering if anyone can help me because I cant find my external Hardrive on My Macbook Air running OSX Mavericks. If anyone could help me solve this it would be highly appreciated Thanks

Click once on the Desktop to switch to the Finder.
Command and , (comma) keys to open its preferences.
General tab. Make sure the show hard and external disks is checked.

Help with using an external USB hard drive to start up a powerbook?!

Hello ppl of the apple support communities,
My uncle recently gave me an Apple Powerbook G4 with a bad internal hard drive and the Mac OS X installation disk that came with the machine! In my country Greece to repair this powerbook costs about 140$ that i dont have! I need your help! I connected the external USB disk to 2 USB ports,and started the Mac OS X 9.2 installation! I went to Utilities Menu checked the disk erase tab and at Volume Format i used ''Mac OS Extended(journaled)'' and checked the box ''Install Mac OS 9 Driver'' and then click Erase. However the box for the ''Install MAc OS 9 disk drivers remained checked.(Seems like they cant be installed!)Then when i go to the partition tab ad at ''Options...'' i cant find this GUID thing and i can only choose between ''Apple Partition Scheme'' and ''PC Partition Scheme''!!

GUID partition scheme is required for Intel-based systems. The Powerbook would use the Apple partition scheme.
While it's probably what was provided with the Powerbook, I wouldn't bother with OS X 9.2. If you plan to use it to connect to the internet, there are so many advances that have taken place since 9.2, especially in handling web sites and security. And some web sites rely on newer versions of plug-ins, like Flash, to name one. You should also expect that watching online video's will be difficult, as even the last Powerbooks have difficulties with some video's.
Good luck with your project!

Cant find hard drive

so i just put in a 2 hard drive into my g5 and i cant find in when it boots up and in finder i cant see it. and im trying to put a newer vertion of osx on the 2 hard drive so.. if anyone made seens out of that.. help?

After installing a new drive run Disk Utility. The drive should show at the left. Select the drive and use the "Erase" function to format it as "Mac Extended Journaled". If the drive doesn't show in "Disk Utility" it may be not connected properly, or it may have SSC (Spread Spectrum Clocking) enabled. The built-in disk controller on the G5 will not work with SSC. Some drives can disable SSC via a jumper change, others have to have it changed via a PC.

Help with buying an External DVD (DL) Drive

Hello,
I was wondering whether you all could point me in the right direction (via links or whatnot) to a good store that sells mac compatiable, external DVD drives? I am going to start backing up information to DVDs and having DVD Dual Layers (DL) compatiablity would help bring down the clutter and any home movies I decide to back-up.
Anyway, I don't mind buying an internal drive and putting it in an enclosure but I would like for it to have firewire support and mac compatiable(all the information about my computer is below, so I am not entirely sure whether or not that I need a "newer version" of Firewire - 1394?) and so far that has been a challenge to find.
Do you guys know where I can find stuff like this for less than $100 ? The cheaper, while being reliable, the better ($40-100 would be fine). Thanks for the help.

This process is not as complex as you are trying to make it seem. I appreciate the help but I am not willing to pay over $100 for an external dvd burner I know I could, as you put it, "hodgepodge together". All it takes is finding a compatible drive, which is most likely Panasonic (or even an incompatible drive, like Sony, because of the "patchs" available). Please tell me of brands that have compatible dvd drives (like Panasonic) or model numbers (with or without DL support because I will more than likely be able to find a drive among the "compatible vendors" that does support DL).
I will then find a retailer online by myself, or search on ebay for a good drive. Then I will find an inexpensive caddy (case) and it should cost less than $80.
I was hoping to find an inexpensive external dvd drive that was clunky and such but would still burn DLs and cost less than $50-70.
By the way, I have two drives, Hitachi 100 GB Travelstar and a Panasonic (Matshita) Superdrive with DL capabilities currently in my iBook G4 right now from doing this very method (although learning the "basics" to know what you are doing does take some medium effort). I then put my internal hard drive into an Oxford 911 Chipset caddy case and it works fine.
To sum it all up, I know it can be done. I only would like to know where to find a compatible vendor to give me the drive (external preferably, but internal if cheap) that will work with my iBook G4 with Mac 10.4.6 on it.
Please let me know if there is any other compatible drive that you know will work and are inexpensive (I could also put an internal dvd drive in an external caddy case).
Thanks
Later
iBook PowerPC G4 1.07 GHz Mac OS X (10.4.6) 100 GB HD, 768 MB DDR SDRAM, 32 MB VRAM, Superdrive, AirPort Extreme

Cant find my driver update

First,? I think it is pretty annoying that Creative does not allow direct email on their pruducts for people who have no idea what pruduct a vendor has packaged in their PC's.
I have a Dell gaming machine and it is way too complex for me to dismantle to get at the card to find a serial number.
I cant find the appropriate driver to update my product as it seems not to be listed on the Creative site.
I went into Device Manager and it says I have a Creative SB X-FI
What is this? How do I find the driver to update it's

thanks. I think this may help. It can be one of two possiblities on their site.

Help with Organizer (Ver 11) after hard drive failure

I have Elements 11 and am an experienced user. Problem is with the Organizer program. Hard drive (Network attached drive) with 16,000+ images failed. Actual Organizer catalog is stored on my regular computer C:\ drive. ONLY the photos were stored on the external drive. I replaced drive with a new drive (also external network attached). When I run Organizer, all the thumbnails indicate the files are "offline." When I run "reconnect files" from the menu bar, it tells me there are no missing files. If I use the file info window (in Organizer) and click on "Location" it tells me the file location ON THE ORIGINAL DRIVE is offline. If I go ahead and reconnect the file from that window, it does ok... BUT... when I go back to the Organizer and open that image full screen, it does NOT show the name tags of the subject when you mouse-over the displayed image. The "name" tags are still listed in the tag window, but no name on the screen. It looks as if the catalog is somehow looking for that very specific old drive, and that the tag database can't connect to the image on the replacement drive.
What happened to the database of all the people's names that are actually shown on-screen for each image?? The catalog on C:\ is intact and untouched by the external drive failure. How can I get Organizer to recognize all the image files on the new hard drive? I have screen shots of all the messages, etc., if that would help.
Thanks..... Earl

First of all, did you backup your catalog/media files via the catalog manager ? In that case the answer is to do a restore to the new custom location.
Since you are asking for help, I presume you have no backup available.
Now, the explanation for the problem. Network drives are considered 'offline' just like CD or DVDs when there are not active. On the other hand, each of those removable storage media are identified in the catalog database with a unique internal identifier which has the letter drive, device serial number, name and type of device. I am not competent about network drives, but I am sure that pluging another network drive will show different properties. Your drive will be considered offline.
Then, when you want to reconnect, the organizer does not consider the files are missing, it waits for you to plug in the original drive.
What solution ?
What could you do to enforce the Organizer to recognize the new drive as the old one ?
Let's suppose your files had not been on a network drive, but on an external USB drive. Then all your files would have been seen as 'missing' because the recorded paths of your media files would have been different for thedrive identifier, and reconnecting could have been a solution.
The main problem I see is that I am pretty sure that you can't tell the catalog manager how to change the identifier of the offline drive, and I can't see any easy workaround. If someone knows a way, I would be extremely interested! Would it be possible to fool the Organizer to identify the new network drive with the same parameters as the old one?
So, what I would do in your case would be to use an external sqlite database manager to look at the catalog.pse11db file and see how I could change directly the identification of the new drive.
I am pretty sure I could do that if the files had been on an external USB drive (not considered 'offline'). It's worth trying that for a network drive.
Tell me if you want to try such a solution. Otherwise, if you have 'written metadata to files', your only immediate chance is to start a new catalog and import from the new drive.

HT1296 i have synced my iphone with laptop but cant find my photos looks like every thing else is there

i have synced my iphone with laptop cant find photos?

Syncing does not move photos from the iPhone to the computer. Moving photos from the Camera Roll on the phone to the computer is done by importing photos, just like you would with a digital camera. Connect the iPhone, start your importing program if Auto Run does not start, and import pictures.

Cant find wifi driver

I cant find the wifi driver for my laptop.I dont know my laptop model but i know this model of driver : PCI\VEN_168C&DEV_0036&SUBSYS_217F103C&REV_01\4&367e2265&0&0014

Hi:
See if this driver works...
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_128686_1
You will also need this bluetooth driver...
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_127984_1

Ok I've read all these I cant get my ipod touch to be recognized in itunes.. I too have done everything it says in support for windows 8.. its doesnt work. my ipod i just got touch 4 is stuckj in restore. I cant find a driver.. cant download from here

ok I found a driver in the area on my computer it says its uptodate but has a yellow ! on it..

Did you:
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem

Help with resizing adjacent partitions on mirrored drives - Solaris 9 V240

Hi,
I need some help here. I'm very new to unix administration. I am running out of space on my /var directory. I have a set of 72G disks that are mirroring each other. The /var is mounted on /dev/md/dsk/d5 which has only 262M available out of 5.8G. Meanwhile the partition adjacent to it /dev/md/dsk/6 which has the /opt/app directory mounted has 5.8G available out of 13G.
Is it possible for me to take space from the slice 6 and give it to slice 5? How do I do this without loosing any data?
Here is some info about my system:
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1c,600000/scsi@2/sd@0,0
1. c1t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1c,600000/scsi@2/sd@1,0
2. c2t5d0 <Symbios-StorEDGEA1000-0301 cyl 17344 alt 2 hd 64 sec 64>
/pseudo/rdnexus@2/rdriver@5,0
3. c2t5d1 <Symbios-StorEDGEA1000-0301 cyl 17344 alt 2 hd 64 sec 64> APP02
/pseudo/rdnexus@2/rdriver@5,1
# df -h
Filesystem      size      used      avail      capacity      Mounted on
/dev/md/dsk/d0 15G 14G 1.5G 91%           /
/proc      0K 0K 0K 0%           /proc
mnttab      0K 0K 0K 0%           /etc/mnttab
fd      0K 0K 0K 0%           /dev/fd
/dev/md/dsk/d5 5.8G 5.5G 264M 96%           /var
swap 16G 168K 16G 1%           /var/run
/dev/dsk/c2t5d1s3 15G 26M 15G 1%           /u1
/dev/dsk/c2t5d0s0 5.9G 3.0G 2.7G 53%           /u2
/dev/dsk/c2t5d0s5 5.9G 1.2G 4.4G 22%           /u3
/dev/md/dsk/d3 4.8G 3.1G 1.7G 65%           /opt
/dev/md/dsk/d4 4.8G 2.8G 2.0G 59%           /tmp
/dev/dsk/c2t5d0s3 5.9G 882M 4.8G 16%           /opt/devbkup
/dev/dsk/c2t5d0s4 5.9G 630M 5.0G 11%           /opt/workarea
/dev/dsk/c2t5d0s6 3.9G 2.4G 1.3G 65%           /opt/patch
/dev/dsk/c2t5d0s7 5.7G 1.9G 3.5G 36%           /opt/app
/dev/md/dsk/d6 13G 7.5G 5.8G 57%           /opt/app2
/export/home/jason 15G 14G 1.5G 91%           /home/jason
Current Disk = c1t0d0
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1c,600000/scsi@2/sd@0,0
Volume name = < >
ascii name = <SUN72G cyl 14087 alt 2 hd 24 sec 424>
pcyl = 14089
ncyl = 14087
acyl = 2
nhead = 24
nsect = 424
Part     Tag     Flag     Cylinders     Size     Blocks
0     root     wm     0 - 3220     15.63GB     (3221/0/0)     32776896
1     swap     wu     3221 - 5636     11.72GB     (2416/0/0)     24585216
2     backup     wm     0 - 14086     68.35GB     (14087/0/0)     143349312
3     unassigned     wm     5637 - 6643     4.89GB     (1007/0/0)     10247232
4     unassigned     wm     6644 - 7650     4.89GB     (1007/0/0)     10247232
5     var     wm     7651 - 8858     5.86GB     (1208/0/0)     12292608
6     unassigned     wm     8859 - 1167     13.67GB     (2818/0/0)     28675968
7     unassigned     wm     11677 - 11685     44.72MB     (9/0/0)     91584
Current Disk = c1t1d0
<SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1c,600000/scsi@2/sd@1,0
Volume name = < >
ascii name = <SUN72G cyl 14087 alt 2 hd 24 sec 424>
pcyl = 14089
ncyl = 14087
acyl = 2
nhead = 24
nsect = 424
Part     Tag     Flag     Cylinders     Size     Blocks
0     root     wm     0 - 3220     15.63GB     (3221/0/0)     32776896
1     swap     wu     3221 - 5636     11.72GB     (2416/0/0)     24585216
2     backup     wm     0 - 14086     68.35GB     (14087/0/0)     143349312
3     unassigned     wm     5637 - 6643     4.89GB     (1007/0/0)     10247232
4     unassigned     wm     6644 - 7650     4.89GB     (1007/0/0)     10247232
5     var     wm     7651 - 8858     5.86GB     (1208/0/0)     12292608
6     unassigned     wm     8859 - 11676     13.67GB     (2818/0/0)     28675968
7     unassigned     wm     11677 - 11685     44.72MB     (9/0/0)     91584
If this isn't possible, it looks like I have about 12G of free space. Partition 7 is only using from 11677-11685 while I could take it up to 11677-14086. I would then have to create the mirror metattach for that partition and then would I just unmount /var and remount it on the new /dev/md/dsk/d7? I'll need help with that. Then what would I do with the unused d5?
A step by step response would be great! Thanks!

# metadb
flags first blk block count
a m p luo 16 8192 /dev/dsk/c1t0d0s7
a p luo 8208 8192 /dev/dsk/c1t0d0s7
a p luo 16 8192 /dev/dsk/c1t1d0s7
a p luo 8208 8192 /dev/dsk/c1t1d0s7
# metastat | more
d0: Mirror
Submirror 0: d20
State: Okay
Submirror 1: d10
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 32776896 blocks (15 GB)
d20: Submirror of d0
State: Okay
Size: 32776896 blocks (15 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t1d0s0 0 No Okay Yes
d10: Submirror of d0
State: Okay
Size: 32776896 blocks (15 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s0 0 No Okay Yes
d1: Mirror
Submirror 0: d21
State: Okay
Submirror 1: d11
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 24585216 blocks (11 GB)
d21: Submirror of d1
State: Okay
Size: 24585216 blocks (11 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t1d0s1 0 No Okay Yes
d11: Submirror of d1
State: Okay
Size: 24585216 blocks (11 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s1 0 No Okay Yes
d3: Mirror
Submirror 0: d23
State: Okay
Submirror 1: d13
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 10247232 blocks (4.9 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t1d0s3 0 No Okay Yes
d13: Submirror of d3
State: Okay
Size: 10247232 blocks (4.9 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s3 0 No Okay Yes
d4: Mirror
Submirror 0: d24
State: Okay
Submirror 1: d14
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 10247232 blocks (4.9 GB)
d24: Submirror of d4
State: Okay
Size: 10247232 blocks (4.9 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t1d0s4 0 No Okay Yes
d14: Submirror of d4
State: Okay
Size: 10247232 blocks (4.9 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s4 0 No Okay Yes
d6: Mirror
Submirror 0: d26
State: Okay
Submirror 1: d16
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 28675968 blocks (13 GB)
d26: Submirror of d6
State: Okay
Size: 28675968 blocks (13 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t1d0s6 0 No Okay Yes
d16: Submirror of d6
State: Okay
Size: 28675968 blocks (13 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s6 0 No Okay Yes
d5: Mirror
Submirror 0: d25
State: Okay
Submirror 1: d15
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 12292608 blocks (5.9 GB)
d25: Submirror of d5
State: Okay
Size: 12292608 blocks (5.9 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t1d0s5 0 No Okay Yes
d15: Submirror of d5
State: Okay
Size: 12292608 blocks (5.9 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s5 0 No Okay Yes
Device Relocation Information:
Device Reloc Device ID
c1t1d0 Yes id1,sd@SSEAGATE_ST373207LSUN72G_3532DM4K____________3KT2DM4K
c1t0d0 Yes id1,sd@SSEAGATE_ST373207LSUN72G_4032QM28____________3KT2QM28
I thank you for any help you can give! Thanks!

Help with Epson and HP All-In-One Drivers

I've been looking through the forums for a day and not really finding what I'm looking for, so I decided to post...
Running an AE-N for a Macbook, a Powermac, and a Powerbook.
I've got two printers...an Epson R200 photo printer and an HP PSC 1410 All-In-One printer/scanner. I'm not worried about the scanning so much as the actual printing, both wirelessly and wired. I have no problem adding the printers...they pop up effortlessly in the printer setup through bonjour. But once I actually try to print to them, they endlessly search for the printer ("Looking for printer Epson R200"). Didn't think this would be a problem because they were found so easily by the AE.
I've read all the iFelix stuff posted and granted, I haven't tried the GIMP method just yet, but the R200 at least should be printing right out of the box, correct?
The printers are plugged into a USB hub and I've got an external HD plugged in as well...no problems with it. Any help would be appreciated...
JDH

John Blanchard1 wrote:
Yes, but it's difficult to know what state the drivers are in after moving things over from Time Machine. Try deleting the /Library/Printers/hp folder and using Software Update to reinstall the current drivers. If that doesn't work, you can download the drivers here:
http://support.apple.com/kb/DL907
This is working. I had the same problem with Yosemite and found Hp drivers were not working properly.
No need to delete the HP folder in library- printers because there wasn't any directory.

Help with Epson 265 cant find epson driver only gutenprint!

Similar Messages

Maybe you are looking for