Help with Error: 35285, Severity: 16, State: 1.
Hello, we started with a 2-node availability group with 1 primary replica and 1 secondary replica in synchronous mode. We then added 1 additional asynchronous replica to our availablility group. Since adding the asynchronous replica, the sql server log
on that replica has been getting constantly spammed with the error messages shown below. It is obsfuscating the sql server error log. What do these errors mean? Are they benign? Is there any way to turn them off or filter them from the log so that we can address
any real issues?
-AlwaysOn Availability Groups connection with primary database terminated for secondary database 'XXX' on the availability replica with Replica ID: {03735ddb-e7c3-4f10-ae49-e0e723d8bf1d}. This is an informational message only. No user action is required.
-A connection for availability group 'HADR' from availability replica 'REPLICA3' with id [BD58E2AB-63BC-41D8-95DA-93F6BDE8B2F4] to 'REPLICA1' with id [03735DDB-E7C3-4F10-AE49-E0E723D8BF1D] has been successfully established. This is an informational
message only. No user action is required.
-AlwaysOn Availability Groups connection with primary database established for secondary database 'XXX' on the availability replica with Replica ID: {03735ddb-e7c3-4f10-ae49-e0e723d8bf1d}. This is an informational message only. No user action is required.
-The recovery LSN (155:2565:1) was identified for the database with ID 24. This is an informational message only. No user action is required.
-Error: 35285, Severity: 16, State: 1.
Thanks for your help!
Perhaps this link helps you.
http://blogs.msdn.com/b/arvindsh/archive/2012/09/26/failover-cluster-instance-alwayson-availability-group-dr-scenario.aspx
This is expected and by-design, the logic being that the FCI already has automatic failover configured between the nodes. The current
implementation of AG doe not allow a failover outside of the FCI nodes.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence
Similar Messages
-
I have a SQL 2008 R2 system (10.50.4000) where I'm having problems connecting any user that is not a SysAdmin. Example: I setup a new SQL Login to use Windows Authentication and grant that user db_datareader on the target database. The user attempts
to connect using Excel client or Access or SQL Management Studio and receives Error 18456. The SQL Server Logs shows Error 18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
The strange part is that if I temporarily grant the user the sysadmin server role then the user can connect successfully and retrieve data. But, if I take away that sysadmin server role then the user can no longer connect but again receives the Error
18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
We've turned off UAC on the client machine to see if that was the problem, but no change.
I have dropped and re-added the user's SQL Login (and the related database user login info). No success.
The Ring Buffers output shows:
The Calling API Name: LookupAccountSidInternal
API Name: LookupAccountSid
Error Code: 0x534
Thanks for any help.
-WaltYes, you understand correctly. The user is logging onto a workstation (not the server) with a Windows Authenticated id. The user is using either Excel or Access or SSMS and connecting to the server using a Windows Authenticated SQL Login account.
If the account has sysadmin role (which is only for testing) then the connection is successful. If I take away sysadmin role from the account then the connection is unsuccessful and the SQL Server Log shows Error
18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
(SQL Authentication is not an option here. I must use Windows Authentication).
Any other troubleshooting assistance you can offer would be appreciated. Thanks.
-Walt -
I see this error: Error: 3624, Severity: 20, State: 1
Complete error in the error log is:
SQL Server Assertion: File: <loglock.cpp>, line=807 Failed Assertion = 'result == LCK_OK'. This error may be timing-related. If the error persists after rerunning the statement, use DBCC CHECKDB to check the database for structural integrity, or restart
the server to ensure in-memory data structures are not corrupted.
SQL Server 2008 R2 with Service pack 2 installed and mirrored.
I see this error in the sql server dump file:
0:000> .ecxr
rax=00000000676a7a6a rbx=0000000003fd3250 rcx=000000001048aaa0
rdx=0000000000000000 rsi=0000000003bbef3c rdi=0000000000000440
rip=000007fefd10940d rsp=000000001048b0b0 rbp=000000001048ca50
r8=0000000000000000 r9=0000000000000000 r10=00000000c000007c
r11=00000000012e98d0 r12=00000000000007c0 r13=0000000000000000
r14=0000000000000000 r15=00000000000007c0
iopl=0 nv up ei pl nz na po nc
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00000206
KERNELBASE!RaiseException+0x39:
000007fe`fd10940d 4881c4c8000000 add rsp,0C8h
0:000> kC 1000
Call Site
KERNELBASE!RaiseException
sqlservr!CDmpDump::Dump
sqlservr!SQLDumperLibraryInvoke
sqlservr!CImageHelper::DoMiniDump
sqlservr!stackTrace
sqlservr!utassert_fail
sqlservr!LogLockCollectionAcquire::Callback
sqlservr!LogLockCollection::ApplyLocks
sqlservr!LogLockCollection::Acquire
sqlservr!DBMRedoManager::AnalyzeLogRecord
sqlservr!DBMRedoManager::RunAnalysis
sqlservr!DBMRedoManager::ApplyLogSegment
sqlservr!DBMRedoManager::Execute
sqlservr!SubprocEntrypoint
sqlservr!SOS_Task::Param::Execute
sqlservr!SOS_Scheduler::RunTask
sqlservr!SOS_Scheduler::ProcessTasks
sqlservr!SchedulerManager::WorkerEntryPoint
sqlservr!SystemThread::RunWorker
sqlservr!SystemThreadDispatcher::ProcessWorker
sqlservr!SchedulerManager::ThreadEntryPoint
msvcr80!endthreadex
msvcr80!endthreadex
kernel32!BaseThreadInitThunk
ntdll!RtlUserThreadStart
Not sure what to infer from this. Any help would be appreciated.
Let me know if more info. is needed.
Thanks !!!I did not have a chance to run that at the time the error happened, now everything is normal. Do you have any idea on what this means?
sqlservr!LogLockCollectionAcquire::Callback
I suggest you to run full DBCC CHECKDB , like I said assertion errors are basically related to Internal SQL Server problem
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP -
Troubleshooting Error: 942, Severity: 14, State: 4
Hi all,
I'm in the process of decomission an old SQL Server 2000. I'm migrating the databases hosted in that instance one by one. I have managed various workaround to handle the changed server\instance name. When I complete the process for one database, I put it
offline in the SQL 2000.
I've a trouble with one database, when I put it offline I see into the profiler a lot of error like this (1 error every 1 seconds):
Error: 942, Severity: 14, State: 4
For what I know this error is because somthing is trying to access a database that is inaccessible (in my case offline) but I can't figure from which client the request came!
Please help!Hello,
If you have the Audit Database Management event selected on Profiler then that error is expected whenever a database if offline.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Hi,
We are getting the following error when running our SSIS packages on Microsoft SQL Server 2012 R2 on Windows Server 2008 R2 SP1:
Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)
SQL Server Data Tools and SQL Server Database Engine reside on the same server.
We tried the following:
Disabling TCP Chimney Offload
Installed Windows Server 2008 SP1
Splitting our SSIS code into multiple steps so it is not all one large continuous operation
The error occurs during a BulkDataLoad task.
Other options we are investigating with the engineering team (out-sourced, so delayed responses):
Firewall configurations (everything is local, so this should not make a difference)
Disabling the anti-virus scanner
Are there other things we can try?
Any insight is greatly appreciated.
Thanks!Hi HenryKwan,
Based on the current information, the issue can be caused by many reasons. Please refer to the following tips:
Install the latest hotfix based on your SQL Server version. Ps: there is no SQL Server 2012 R2 version.
Change the MaxConcurrentExecutables property from -1 to another one based on the MAXDOP. For example, 8.
Set "RetainSameConnection" Property to FALSE on the all the connection managers.
Reference:
https://connect.microsoft.com/SQLServer/feedback/details/774370/ssis-packages-abort-with-unexpected-termination-message
If the issue is still existed, as Jakub suggested, please provide us more information about this issue.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Error 4014 Severity 16 State A fatal error occurred while reading the input streamfrom the network
We encounter following error intermittently Error 4014 Severity 20 State 16 , A fatal error occurred while reading the input stream from the network
I have checked the RING_BUFFER_CONNECTIVITY from sys.dm_os_ring_buffers, we are able to find the remote_host IP where connections are being closed/killed, the error being logged in sys.dm_os_ring_buffers, comes from multiple remote_host, we have raised
to O/s and Networking Team they seem to have no clue, why this error occurs
Server: Virtual Machine
Operating System: WINDOW 2008 R2 SP1
MSSQL 2008 STD ED SP3 10.0.5850.0
Database mirroring is configured for the application database.
Antivirus enable on the database server
How do we find the cause for this error being logged in SQL server logs, is this error due to SQL database mirroring or memory issue?
What needs to be checked on the O/s and Network, I have been checking on the internet and everywhere it is pointing to NIC drivers or security patches
Also in the system events following error was being logged, but after restarting the vm service this error has not re-occurred
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the VMTools service
Kindly suggest on Error 4014 Severity 20 State 16, A fatal error how to resolve
[email protected]Hello,
Could you try to use Network Monitor or WireShark to examine if the connections resets are coming from a client computer
or from the host where SQL Server is installed?
Network Monitor can be downloaded from the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
If you use Network Monitor trace you will identify connection resets by looking for “TCP: Flags=,,R.A” at the description column on the Frame Summary. Once you find the flag, the Source column will tell you the identity of the host resetting the connection,
maybe is not the SQL Server host.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Error: 697, Severity: 21, State: 1
Dear Experts,
I received the following error
Error: 697, Severity: 21, State: 1
An attempt was made to fetch logical page '2382' for database 'saptools' (5), object 'DBH_SNAP_TABLES' (2005579152), index 'DBH_SNAP_TABLES' (0), partition 'DBH_SNAP_TABLES_2005579152' (2005579152) from cache 'default data cache'. Wrong logical page '2398' was found in cache
Acc to Sybase troubleshooting guide, we can restart to clear the memory error.
I want to know if there is any alternative for fixing this error
What could be the root cause/reason for this error to occur?
Why I'm seeing "Wrong logical page '2398' was found in cache" ?
Any insight will be much appreciated
Attachment: errorlog
Regards,
RajeshHello Rajesh,
Its Error:697 again
The Checktable output says:
Checking partition 'DBH_SNAP_TABLES_2005579152' (partition ID 2005579152) of table 'DBH_SNAP_TABLES'. The logical page size of this table is 16384 bytes.
Msg 697, Level 16, State 1:
Server 'E20', Line 1:
An attempt was made to fetch logical page '2382' for database 'saptools' (5), object 'DBH_SNAP_TABLES' (2005579152), index 'DBH_SNAP_TABLES' (-1), partition 'DBH_SNAP_TABLES_2005579152' (2005579152) from cache 'default data cache'. Wrong logical page '2398' was found in cache.
DBCC execution completed.
If DBCC printed error messages, contact a user with System Administrator (SA) role.
Explanation:
This error occurs when Adaptive Server tries to access an object in cache but arrives at an invalid page. The page number is correct on disk, but it does not match the page number of the page in memory.
Error 697 results in a stack trace and breaks your connection to Adaptive Server.
Action
Since the problem occurs in cache, it is a soft error. Shut down and restart Adaptive Server to clear the memory corruption.
PS: If this is not working out then you should try with the "saptools" restore from a good backup
Regards
Kiran K Adharapuram -
I've seen some similar questions, but want to make sure I can get an answer quickly and how to fix.
Thanks,
Paul
spid24s Error: 28005, Severity: 16, State: 2
spid24s An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impersonated,
or you do not have permission.Hi Paul,
I also had the same error on one of my servers, and it was because the user that created the database no longer worked for the company.
So when his AD account got deleted, the database had NULL as owner
Using the following query I asked for the owners of the databases:
select name, suser_sname(sid) from master.dbo.sysdatabases
So changing the owner of the databases that had a NULL owner solved the issue for me.
use <databasesname>
go
exec sp_changedbowner 'sa'
Thanks for triggering the solution.
Peter -
help with error 16820 with trying to update acrobat
Please refer to following links, might be helpful.
http://answers.acrobatusers.com/While-updating-acrobat-error-code-showd-16820-solve-q7115. aspx
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/acrobat-co m-will-not-update-getting-error-16820/7bbbef64-df3e-4fbd-b552-fc1c7a5983c3?msgId=dcf838d8- a198-4a3a-b034-94a07c2e8648
If this doesn't work, we need more information here. -
Need help with error message 213:8
Need help with error message 213:8, this error message prompted after re-installing CS5.5 on the same machine (W7 Pro)
Thanks.Hi TKA_,
Please try the solutions mentioned on following forum thread.
http://support.muse.adobe.com/thread/1305941?start=0&tstart=0
Let me know if it works?
Regards,
Sumit Singh -
Adobe help with error FF2F571A-6C54-31E3-B23E-2A60283B08A8
Adobe help with error FF2F571A-6C54-31E3-B23E-2A60283B08A8
Nobody can tell you anything without proper system info or other technical details. What you posted is merely an identifier of the error report sent to Adobe, but that is locked away safely on teh servers and nobody here has access to it.
Mylenium -
Extended Program check: Need help with error messages
Hi,
I am getting the following error message several time on different internal table declarations:
"Tables with headers are no longer supported in the OO context."
This is the data declaration that it refers to:
I_ZDAILY_MVMT TYPE TABLE OF ZDAILY_MVMT WITH HEADER LINE.
Also, I am getting the following:
You cannot use the "RANGES" statement within classes. Instead, use the "DATA"
statement with the type "TYPE/LIKE RANGE OF" . . . . . . . . .
This is for the following data declaration:
RANGES: I_WERKS FOR EBAN-WERKS, "PLANT RANGE
I_VTWEG FOR I_TVTW-VTWEG,
I_VTWEG2 FOR I_TVTW-VTWEG,
I_VKORG FOR I_TVKO-VKORG,
I_AUART FOR I_TVAK-AUART.
What do I change and then how do i populate them?
Thanks,
John
Message was edited by:
John DamionWe dont use tables with header lines any more.
Declare a work area and use it transfer the data.
e.g.
types: types_ZDAILY_MVMT TYPE standard table of TABLE OF ZDAILY_MVMT.
data: I_ZDAILY_MVMT TYPE type_ZDAILY_MVMT,
wa_zdaily type zdaily_mvmt.
Now use this work area to move data into the table.
Regards,
Amit
Reward all helpful replies. -
Hi, I'm building a Flash website.
I've used frames with names to contain the different 'pages'
of the site. On the frame called 'SVHS1' I've built an XML mp3
player with buttons and a volume slider.
I'm having a couple of problems with this section of the
site.
Firstly: when I 'test movie' and navigate to the mp3 player
section it all works fine, the mp3s load correctly, the playback
controls work fine, and the volume slider does what it's supposed
to do. But if I've used the volume slider to adjust the volume (and
only then) and then navigate to the next frame 'SVHS2' (or any
frames that are later in the main timeline) I get multiple
occurrences of the following error in the output pane:
TypeError: Error #1009: Cannot access a property or method
of a null object reference.
At PSPWebsite1_fla::MainTimeline/adjustVolume()
I understand (from reading other posts/help etc.) in
principle what is causing this, but my knowledge of AS3 is too
limited to know exactly what is wrong with my script or how to fix
it.
Secondly: if I press the stop button on my mp3 player and
then navigate to another frame (any frame before or after
‘SVHS1’) the site works fine, and the mp3 player works
perfectly if I go to that frame again. But if I navigate to another
frame without first stopping the song it continues to play even
though I’m not on the mp3 player frame, and if I go back to
the mp3 player before the song has finished it starts playing
automatically from the beginning of the first song in the XML list
again and simply doubles up the sound, which is horrible. When this
happens the playback controls only affect the 2nd version
(understandably).
I think this is probably quite simple to fix, assuming that I
have to write some script that tells the mp3 player to stop playing
if/when the user navigates away from that frame...but I don’t
know how to do this.
Any help with either of the above would be much appreciated.
The attached script is for the mp3 player frame.You can consider the trace function as being a "can you hear
me now" helper (instead of an annoying tv commercial gimmick). It
displays whatever it's told to in the same output window that you
see that error message come up in. There are two ways I'll usually
use it.
I'll often end up simply using a trace("here"); as a means of
seeing where a process is getting hung up. I gradually move that
line of code thru what I know to be the step by step sequence of
the code until "here" no longer shows up. It normally indicates
that the preceding line of code is where the ball got dropped.
In AS3, which is often a little more helpful when it trips on
something, such as the error message you received which tells you
there's a problem in the adjustVolume function, you can use it to
see what element in that function is either undefined or out of
scope.
Place... trace(vol); ... just after the first line of code in
that function to see if vol is a number. If it is, then you know
that line is okay and you can move on to check the next line. If it
isn't a number, then move the trace before that line and change it
to... trace(volume_mc.slider_mc.x); ... and see if it is a value.
If it isn't, then change the trace to check to see what
trace(volume_mc); results in.... so on and so on.
It's basically a process of working your way thru code to
narrow down what piece is the undefined/out-of-scope (or a syntax
error) element that is causing the problem. -
Please help with error message while trying to update i tunes
Errors occurred while installing the updates, if the problem persists, choose tools, download only and installing manually
When i try and download i-tunes i get a message about URBCHN1 not being a win32 command, or something similar.
... that's an unusual one.
could you possibly send us a screenshot of the error message box? for instructions, see the following user tip:
hudgie: Taking screenshots to help with problems -
Adobe has not been a big help with this. If anyone knows what might be causing this error - great, pls post. Otherwise, in order to work the problem myself, I need to know the file locations of Camera Raw within PS CC and also the file location of where Adobe CC places the d/l'd compressed version. Thanks much, Gerry
U44M update error http://forums.adobe.com/thread/1289956
--more U44.. discussion http://forums.adobe.com/thread/1275963
Maybe you are looking for
-
Robohelp 9 crashes when selecting
After I import FrameMaker files into RoboHelp I try to use File > Generate > ePub Output. I continually get an application error (0xc00000fd) and the program closes.
-
Why is the render quality less than the source files
I am setting render quality at Best, Full 1920 x 1080. The movie quality in either a quick time or windows media player file is terrible. These same files export at good quality at school with the same settings. Why am I getting poor image qualit
-
Why is the runFinalizersOnExit method in class System depricated?
The explaination given in javadocs for deprication of runFinalizersOnExit in System class is that "It may result in finalizers being called on live objects while other threads are concurrently manipulating those objects, resulting in erratic behavior
-
I have added a user defined field at the row level.I am performing some calculation on this udf in the goods receipt po form.I need to refresh this system matrix after performing calculations.Is it possible to refresh system matrix programatically ?
-
Cash flow s_alr_87012271
Hi friends i have configured the cashflow and forcasting as per the standerd 1 source symbols 2 planning levels 3 Planning groups 4 assigning internal code 5 cash management group 6 cash management grouping structure 7 activating cash management in g