Help with error 9002 please?

I'm using Photoshop CS3 with AutoCollage v 3 by Pixel Creator Pro.
Every time I try to populate the templates with pictures from Bridge I get an error number 9002 and lower down - runtimeError (Stdlib.IO_Error_Code) and at the bottom it says /openimage.ini" I/O error). Does anyone have any idea how to fix this please? This is a good application which I can't use. Many thanks for any help you can give. It will create the template in photoshop but that's as far as it will go - can't put any images into the boxes!

Thank you - that was it - "class" - or lack of .
I am most appreciative of your assistance
regards

Similar Messages

Help with error code, please.

I have compiled a small AS3 script of a bouncing basketball with sound - the volume of the sound decreasing as the bounces get smaller.
I have obviously not done something correctly in the way I have installed the sound because I get this error message " 1180: Call to possibly undefined method bounce2 "( bounce2 is the mp3 file). Without the sound the ball bounces perfectly - it is the sound that has killed it. I am a newbie and am trying to learn AS3 the hard way - by experience but am stumped here - can some one help, please? Below is my script.
// create a ball sprite
import flash.media.Sound;
var initialrotationSpeed=12;
var rotationSpeed : Number;
var initialxVel : Number=8;
var stage_width : Number=750;
ball_mc.x=80;
ball_mc.y=360;
//setup position and velocity variables
var xPos : Number=ball_mc.x;
var yPos : Number=ball_mc.y;
var xVel : Number;
var yVel : Number=0.5;
var grav ; Number=1;
var vol : Number=1;
var snd : Sound=new bounce2();
snd.play();
addEventListener(Event.ENTER_FRAME,onLoop,false,0,true);
function onLoop(evt:Event) : void {
if(ball_mc.x/stage_width));
xVel=initialxVel*(1-(ball_mc.x/stage_width));
yVel+=grav;
xPos+=xVel;
yPos+=yVel;
if(Math.abs(yPos-560)<1&&Math.abs(yVel)<1)
remove EventListener(Event.ENTER_FRAME,onLoop);
else if(yPos>560){
yPos=560;
yVel*= -.8;
xVel*= .8;
vol- =0.1;
snd.play(0,0,newSoundTransform(vol));
ball_mc.x=xPos;
ball_mc.y=yPos;
if(ball_mc.xstage.stageWidth-ball_mc.width/4||ball_mc.x<0+ball_mc.width/4){
xVel*= -1;
addEventListener(Event.ENTER_FRAME,Rotation);
function Rotation(event:Event):void {
if(ball_mc.x/stage_width<1)
ball_mc.rotation+=initialrotationSpeed*(1-ball_mc.x/stage_width);
if(ball_mc.x<700)
xVel=initialxVel*(1-(ball_mc.x/stage_width));
ball_mc.x+=xVel;
else
removeEventListener(Event.ENTER_FRAME,Rotation);

Thank you - that was it - "class" - or lack of .
I am most appreciative of your assistance
regards

Help with error message, please!

I have treated my iPod like the crown jewels in the two years I've had it. Never dropped it, doesn't have a scratch on it. Imagine my sense of betrayal when suddenly I'm getting an error message "Attempting to copy to the disk 'Jim's iPod' failed. An unknown error occurred (-69)."
This after 9.81 gigs of music has copied over, out of 19+ gigs. I have found no articles or postings relating to this error message, anywhere. Out of desperation, I followed the instructions for clearing a "1413" error message, since that one seems to be fairly prevalent and there's a lot of literature on it. But to no avail.
I have done everything I can think of to the iPod itself. Reset it, restored it, run diagnostics (the HDD Test starts but won't complete; everything else gets a pass).
I suppose at some point I may have to admit that the HD is FUBAR, but I'm not ready for that yet.
Here's a question that I probably ought to know the answer to already: I have two users listed on my computer besides "All Users" and "All Users.WINDOWS" -- not sure how that happened, but there's "Jim" and there's "Jim.DAD" (DAD being my home netword name). The music folders under "ITUNES MUSIC" under these two users are not exactly the same. One is missing some artists. The listing of iTunes music in "My Docs/My Music" is also incomplete. But the music is there; I can play it out of the iTunes library. My question is, where is iTunes getting the music files when it copies to the iPod? Could this labeling screwup be causing that error message? I know, I'm probably just in denial about the demise of my iPod, but I'm gonna look for every possible source of this **** error message before giving up. Can anyone help? Sure do appreciate it if you can.
Jim

If anyone's interested (and it doesn't appear that anyone is), the problem was solved when I unplugged a USB external hard drive and simply plugged it back in.
Doesn't say much for those Apple geniuses, IMO.

Iphone 4 help with error messages please =)

When I plug it into itunes two error messages are coming up.....itunes could not connect to iphone...because an error occured while reading from the device and the second is a number 0xe8000001 any help greatly recieved

The following document might be worth a try, sharon:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting to a Windows PC

Help with error message please (xbootclasspath)

I have a 32bit system running Vista and the JRE that I did have used to work fine but then it did a few updates and I could no longer use the Java Port Forwarder for remote access to my works network.
I tried to uninstall and rollback but couldnt get it to work at all.
In efforts to ammend this as I no longer know which one did work, I have completely removed Java down to registry level and laid in a fresh install of 6u24.
Alas, when I go to open the Java Control Panel I get this message:
Java(TM) Control Panel
C:\Program Files\Java\jre6\bin\javaw.exe
-Xbootclasspath/a:"C:\Program Files\Java\jre6\bin\..\lib\deploy.jar"
-Duser.home="C:\Users\Dave" com.sun.deploy.panel.ControlPanel
OK
If I navigate to the Jre6 root and try to open javaw.exe nothing at all happens.
---------------------------------------- and try to open deploy.jar I get the following;
Java Virtual Machine Launcher
Failed to load Main-Class manifest attribute from
C:\Program Files\Java\jre6\lib\deploy.jar
If I try to navigate to the works page and attempt to log on (IE8) then it opens the Port Forwarder screen and hangs.
If anyone can shed any light onto the issue then I would be most grateful -
As I am sure I may have missed out many important pieces of info just ask!
Thanks,

See this link:
Re: Java Control Panel

Need help with error message 213:8

Need help with error message 213:8, this error message prompted after re-installing CS5.5 on the same machine (W7 Pro)
Thanks.

Hi TKA_,
Please try the solutions mentioned on following forum thread.
http://support.muse.adobe.com/thread/1305941?start=0&tstart=0
Let me know if it works?
Regards,
Sumit Singh

Help with error 16820

help with error 16820 with trying to update acrobat

Please refer to following links, might be helpful.
http://answers.acrobatusers.com/While-updating-acrobat-error-code-showd-16820-solve-q7115. aspx
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/acrobat-co m-will-not-update-getting-error-16820/7bbbef64-df3e-4fbd-b552-fc1c7a5983c3?msgId=dcf838d8- a198-4a3a-b034-94a07c2e8648
If this doesn't work, we need more information here.

Help with access control please

So I'm trying to set up my brother's PSP to the wirless network through MAC address timed access. What I want to do is make it so that he can only access it through certain times in the day. I'm having troubles with actually getting it to work. Everytime I set it up, the PSP only show's up as a DHCP client and not a Wireless client. I tried the option panel with the add wireless clients through the first try access. Could I get some help with this issue please? Thanks!

Just to calm your fears... There is no conspiracy. If someone had an answer or a suggestion they would post it.

Adobe help with error FF2F571A-6C54-31E3-B23E-2A60283B08A8

Adobe help with error FF2F571A-6C54-31E3-B23E-2A60283B08A8

Nobody can tell you anything without proper system info or other technical details. What you posted is merely an identifier of the error report sent to Adobe, but that is locked away safely on teh servers and nobody here has access to it.
Mylenium

Please help with "Error writing the project file. The specified module could not be found." error.

I am a student. I've been trying to install and use Visual Studio 2013 Professional for three weeks now and I cannot get it to work. I am now two weeks behind in my Visual Basic class. I've installed, uninstalled, ran the repair option...
I've tried everything I know how to do. I just spent 45 minutes on the phone with Microsoft, was transferred four times and finally told I will have to use the forums to find an answer. I'm almost completely out of patience with this.
I got the software through the Dream Spark program as a student. I installed it with the web installer and it appeared to install fine. When I try to create a new project, I get the error: "Error writing the project file. The
specified module could not be found."
When I exit the application, I also get: "The automatically saved settings file 'c:\users\user\documents\visual studio 2013\Settings\CurrentSettings-2015-02-02.vssettings' is not available for write. You can change this file on the 'Import
and Export Settings' Tools Options page."
Please tell me you can help.

Hi,
could you please try the points mentioned here:
http://social.msdn.microsoft.com/Forums/en-US/vssetup/thread/0376db8f-4761-4ae5-9af2-98c53216318a#VS_IDE_unexpected_problems to eliminate the possible cause of your issue?
Please update the result in the forum after you try the method above!
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

When ever itunes updates, it ends up coming up with error message please re-install itunes, nothing i do seems to work, help please

When ever iTunes updates, it ends up coming up with error message, iTunes did not install properly, please re-install iTunes, this is about the fourth time this has happened, end up having to take it to computer tech at a cost of $180, please help

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Help with Errors please!

Hi, I'm building a Flash website.
I've used frames with names to contain the different 'pages'
of the site. On the frame called 'SVHS1' I've built an XML mp3
player with buttons and a volume slider.
I'm having a couple of problems with this section of the
site.
Firstly: when I 'test movie' and navigate to the mp3 player
section it all works fine, the mp3s load correctly, the playback
controls work fine, and the volume slider does what it's supposed
to do. But if I've used the volume slider to adjust the volume (and
only then) and then navigate to the next frame 'SVHS2' (or any
frames that are later in the main timeline) I get multiple
occurrences of the following error in the output pane:
TypeError: Error #1009: Cannot access a property or method
of a null object reference.
At PSPWebsite1_fla::MainTimeline/adjustVolume()
I understand (from reading other posts/help etc.) in
principle what is causing this, but my knowledge of AS3 is too
limited to know exactly what is wrong with my script or how to fix
it.
Secondly: if I press the stop button on my mp3 player and
then navigate to another frame (any frame before or after
‘SVHS1’) the site works fine, and the mp3 player works
perfectly if I go to that frame again. But if I navigate to another
frame without first stopping the song it continues to play even
though I’m not on the mp3 player frame, and if I go back to
the mp3 player before the song has finished it starts playing
automatically from the beginning of the first song in the XML list
again and simply doubles up the sound, which is horrible. When this
happens the playback controls only affect the 2nd version
(understandably).
I think this is probably quite simple to fix, assuming that I
have to write some script that tells the mp3 player to stop playing
if/when the user navigates away from that frame...but I don’t
know how to do this.
Any help with either of the above would be much appreciated.
The attached script is for the mp3 player frame.

You can consider the trace function as being a "can you hear
me now" helper (instead of an annoying tv commercial gimmick). It
displays whatever it's told to in the same output window that you
see that error message come up in. There are two ways I'll usually
use it.
I'll often end up simply using a trace("here"); as a means of
seeing where a process is getting hung up. I gradually move that
line of code thru what I know to be the step by step sequence of
the code until "here" no longer shows up. It normally indicates
that the preceding line of code is where the ball got dropped.
In AS3, which is often a little more helpful when it trips on
something, such as the error message you received which tells you
there's a problem in the adjustVolume function, you can use it to
see what element in that function is either undefined or out of
scope.
Place... trace(vol); ... just after the first line of code in
that function to see if vol is a number. If it is, then you know
that line is okay and you can move on to check the next line. If it
isn't a number, then move the trace before that line and change it
to... trace(volume_mc.slider_mc.x); ... and see if it is a value.
If it isn't, then change the trace to check to see what
trace(volume_mc); results in.... so on and so on.
It's basically a process of working your way thru code to
narrow down what piece is the undefined/out-of-scope (or a syntax
error) element that is causing the problem.

Please help with error message while trying to update i tunes

Errors occurred while installing the updates, if the problem persists, choose tools, download only and installing manually

When i try and download i-tunes i get a message about URBCHN1 not being a win32 command, or something similar.
... that's an unusual one.
could you possibly send us a screenshot of the error message box? for instructions, see the following user tip:
hudgie: Taking screenshots to help with problems

HT1369 iphone 4 wont turn on unless plugged in,then stuck in recovery and wont restore with error 21,PLEASE HELP

please i tried everything,when its plugged in wall it turns on but goes to the connect to itunes screen,same when connecting to pc. The second i unplug it it turns off. i tried EVERYTHING from holding off and home to new battery,itunes will pull up and say phones in restore mode i follow instructions and it stops at end saying error 21.please help

ok i got worst migraine,been doing this a week now.i tried everything in that support as much as i could understand,im not saying im dumb but not the smartest girl for computer stuff.I also did diagnostic test in itunes and it passed all but the connection test and says port (dang i forgot again) something about the port and it was the only thing to fail,the rest passed.does this mean anything? this *** i was using my cell and it just turned off and now all this happened. did i mention it wont turn on unless plugged in wall or computer?

Help with error on procedure

Error is
ORA-06550: line 1, column 71:
PLS-00103: Encountered the symbol ">" when expecting one of the following:
. ( ) , * @ % & = - + < / > at in is mod remainder not rem
<an exponent (**)> <> or != or ~= >= <= <> and or like like2
like4 likec between || multiset member submultiset
ORA-06550: line 1, column 71:
PLS-00103: Encountered the symbol ">" when expecting one of the following:
. ( ) , * @ % & = - + < / > at in is mod remainder not rem
<an exponent (**)> <> or != or ~= >= <= <> and or like like2
like4 likec between || multiset member submultiset
The problem is I don't have < or > in my procedure. The error shows when I call procedure from c# using OleDb provider. Any help with this. The procedure works fine from sql developer.

Hi Marcus ,
I did the same thing on my database based on the script you had given.
Please go through it.
SQL> create table location(location_number number, location_id number, usage_id number);
Table created.
SQL> insert into location values(10,20,30);
1 row created.
SQL> insert into location values(11,21,31);
1 row created.
SQL> create table usage( usage_number number, usage_id number);
Table created.
SQL> insert into usage values(50,30);
1 row created.
SQL> insert into usage values(60,40);
1 row created.
SQL> commit;
Commit complete.
SQL> create or replace
PROCEDURE P_GET_ALL(
p_place in number,
2 p_location out number,
3 4 p_usage out number)
5 6 is
begin
7 select loc.location_number into p_location from location loc where
8
loc.location_id=p_place;
select us.usage_number into p_usage from usage us where us.usage_id=(select
loc.usage_id from location loc where loc.location_id=p_place);
end; 9 10 11 12 13 14
15 /
Procedure created.
Hope it would help you. :)
Thanks,
Balaji K.

Help with error 9002 please?

Similar Messages

Maybe you are looking for