Help with error E1611 in itunes

Please can someone help me as Apple refuse to- and i'm at my wits' end
I have had the error 1611 that many people both here and elsewhere seem to get namely the Ipod Touch 2nd Generation not switching on of it's own free will and when it's connected to my laptop i get the error message 1611.
I have looked online for days and have done every singe suggestion countless times
i.e restore
uninstalling and re-installing itunes
using all versions of itunes since 7.0
using all relevant versions of the firmware
using a different computer (running XP)
holding down home and Power button
using different USB ports
going thorugh DFU
i have even contacted apple, sent my ipod to them but have responded by saying i have abused or accidentally damage my Ipod. I cannot believe they had the cheek to say this!
I have done nothing but keep the Ipod in a padded leather case, used it for less than 4 weeks- 5hrs per week at most. I have only put music and Apps from the store on it and nothing more.
I havent dropped it or broken it physically so i dont know how they can suggest it's my fault. I rang Apple care and i got through to the Indian Subcontinent to a person who spoke less English than my cat and had to wait 10mintes plus for the privilege
Can anybody help me resolve this issue as at the moment and im left with a £200+ piece of metal and glass that i can't do anything with
I chose Apple as i believed they were innovative and quality products and now i'm left completely annoyed and frustrated (and i'm sure it shows haha)

I have been quoted £106.73 to get it fixed by Apple, what a complete joke!
are they for real? the ipod breaks, they blame me and i have to pay for them to fix it.
I spoke to the UPS man who said 'you wouldn't believe how many Ipods i get to send to Apple' think that speaks volumes

Similar Messages

Help with error 16820

help with error 16820 with trying to update acrobat

Please refer to following links, might be helpful.
http://answers.acrobatusers.com/While-updating-acrobat-error-code-showd-16820-solve-q7115. aspx
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/acrobat-co m-will-not-update-getting-error-16820/7bbbef64-df3e-4fbd-b552-fc1c7a5983c3?msgId=dcf838d8- a198-4a3a-b034-94a07c2e8648
If this doesn't work, we need more information here.

Need help with error message 213:8

Need help with error message 213:8, this error message prompted after re-installing CS5.5 on the same machine (W7 Pro)
Thanks.

Hi TKA_,
Please try the solutions mentioned on following forum thread.
http://support.muse.adobe.com/thread/1305941?start=0&tstart=0
Let me know if it works?
Regards,
Sumit Singh

Adobe help with error FF2F571A-6C54-31E3-B23E-2A60283B08A8

Adobe help with error FF2F571A-6C54-31E3-B23E-2A60283B08A8

Nobody can tell you anything without proper system info or other technical details. What you posted is merely an identifier of the error report sent to Adobe, but that is locked away safely on teh servers and nobody here has access to it.
Mylenium

Help with error 5002

Just in the morning i received the error 5002 in iTunes. Everytime i try to sign in i get it.
I already tried rebooting the laptop but it doesn't work.
Any help??

"Error 5002"
This alert is often the result of an issue with verifying your billing.
Quit iTunes.
Open iTunes.
Test the issue.
If it persists, sign in to store.apple.com using your iTunes account
Click on Change account information
Modify or remove your credit card information.
Click Continue.
Test the issue.

HELP WITH ERROR 2095

Can any one help me with error message 2095 on quicktime? i have tryed to uninstall it with add/remove programs but it says the following file does not exist or is not a valid uninstallation log file C:\WINDOWS\system32\quicktime\uninstall.log
???!!!??? and because of this i can not open itunes and everytime i try to it tells me that itunes as ran into a problem and has to close
i have read online that i can uninstall quicktime manually with safemode or something like that but i have no idea how to, so if any one at all has any helpful advice please reply
thanks

I posted this link to you yesterday, did it not work?
http://discussions.apple.com/thread.jspa?threadID=799482&tstart=15
Safe Mode is probably not going to be of much help. If the computer was re-starting on its own than it would help to stabilize the computer(in safe mode) to remove the driver causing it to re-start, your able to access the computer.

Do you need help with error code 1004

The alert message in iTunes may include one of the following numbers (or the message may include a number not listed here):
1, -1, 2, 4, 6, 9, 13, 14, 20, 21, 23, 26, 28, 29, 34, 35, 36, 37, 40, -48, -50, 1000, 1002, 1004, 1011, 1013, 1014, 1015, 1479, 1600, 1601, 1602, 1603, 1604, 1611, 1631, 1638, 1639, 2001, 2002, 2005, 2006, 2009, 3002, 3004, 3013, 3014, 3015, 3194, 3200, 9006, 9807, -9808, 9844, 4026xxxxx.
Click the link for the error code you have. If it's not listed here, check the error messages below, and then if necessary follow the advanced steps below to resolve the issue.
Resolution
Specific error messages and resolutions
Collapse All | Expand All
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3014
This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below in Unable to contact the iOS software update server gs.apple.com.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service. If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
Error 1611
This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Error 13, 14, 35 and 50 (or -50)These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
There was a problem downloading the software for the iPhone (or another iOS device)
See the steps below for error codes 3000-3999.
iTunes cannot connect to the iPhone because an invalid response received from the device
This error occurs when there are problems communicating through USB. This may be resolved by following the steps for errors 13 or 14 above.
Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
Hang during restore process

See the following:
Error 150:30 - Error "Licensing has stopped working" | Mac OS :
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

Need help with error -50!!!!!!! getting it since last week!

i keep having an error showing up when im trying to connect to the itunes store from my computer.
the error is
We could not complete your iTunes Store request. An unknown error occured (-50).
There was an error in the iTunes Store.
Please try again later.
i have been getting this message since last week.
does it have something to do with day lights saving time?
Message was edited by: mrznehabieber14

Hi Try this, i was having the same problem and doing the following worked for me" i cant take the credit i found this in another forum posted by MIKEFILA, but i know what you going thru was so stressed.
I just read someone's suggestion to access Parental Controls under Preferences. Choose to disable the Store and then iTunes U. Update and then voila! The iTunes U appears; even though you just "disabled" it. Next go back into Preferences/Parental Controls and "re-enable" the Store... Good Luck!

Help with Errors please!

Hi, I'm building a Flash website.
I've used frames with names to contain the different 'pages'
of the site. On the frame called 'SVHS1' I've built an XML mp3
player with buttons and a volume slider.
I'm having a couple of problems with this section of the
site.
Firstly: when I 'test movie' and navigate to the mp3 player
section it all works fine, the mp3s load correctly, the playback
controls work fine, and the volume slider does what it's supposed
to do. But if I've used the volume slider to adjust the volume (and
only then) and then navigate to the next frame 'SVHS2' (or any
frames that are later in the main timeline) I get multiple
occurrences of the following error in the output pane:
TypeError: Error #1009: Cannot access a property or method
of a null object reference.
At PSPWebsite1_fla::MainTimeline/adjustVolume()
I understand (from reading other posts/help etc.) in
principle what is causing this, but my knowledge of AS3 is too
limited to know exactly what is wrong with my script or how to fix
it.
Secondly: if I press the stop button on my mp3 player and
then navigate to another frame (any frame before or after
‘SVHS1’) the site works fine, and the mp3 player works
perfectly if I go to that frame again. But if I navigate to another
frame without first stopping the song it continues to play even
though I’m not on the mp3 player frame, and if I go back to
the mp3 player before the song has finished it starts playing
automatically from the beginning of the first song in the XML list
again and simply doubles up the sound, which is horrible. When this
happens the playback controls only affect the 2nd version
(understandably).
I think this is probably quite simple to fix, assuming that I
have to write some script that tells the mp3 player to stop playing
if/when the user navigates away from that frame...but I don’t
know how to do this.
Any help with either of the above would be much appreciated.
The attached script is for the mp3 player frame.

You can consider the trace function as being a "can you hear
me now" helper (instead of an annoying tv commercial gimmick). It
displays whatever it's told to in the same output window that you
see that error message come up in. There are two ways I'll usually
use it.
I'll often end up simply using a trace("here"); as a means of
seeing where a process is getting hung up. I gradually move that
line of code thru what I know to be the step by step sequence of
the code until "here" no longer shows up. It normally indicates
that the preceding line of code is where the ball got dropped.
In AS3, which is often a little more helpful when it trips on
something, such as the error message you received which tells you
there's a problem in the adjustVolume function, you can use it to
see what element in that function is either undefined or out of
scope.
Place... trace(vol); ... just after the first line of code in
that function to see if vol is a number. If it is, then you know
that line is okay and you can move on to check the next line. If it
isn't a number, then move the trace before that line and change it
to... trace(volume_mc.slider_mc.x); ... and see if it is a value.
If it isn't, then change the trace to check to see what
trace(volume_mc); results in.... so on and so on.
It's basically a process of working your way thru code to
narrow down what piece is the undefined/out-of-scope (or a syntax
error) element that is causing the problem.

Please help with error message while trying to update i tunes

Errors occurred while installing the updates, if the problem persists, choose tools, download only and installing manually

When i try and download i-tunes i get a message about URBCHN1 not being a win32 command, or something similar.
... that's an unusual one.
could you possibly send us a screenshot of the error message box? for instructions, see the following user tip:
hudgie: Taking screenshots to help with problems

Help with error U44M1I210(unable to extract . . . . .) Also file location of Camera Raw in PS CC and location of compressed CC downloads

Adobe has not been a big help with this. If anyone knows what might be causing this error - great, pls post. Otherwise, in order to work the problem myself, I need to know the file locations of Camera Raw within PS CC and also the file location of where Adobe CC places the d/l'd compressed version. Thanks much, Gerry

U44M update error http://forums.adobe.com/thread/1289956
--more U44.. discussion http://forums.adobe.com/thread/1275963

Help with error on procedure

Error is
ORA-06550: line 1, column 71:
PLS-00103: Encountered the symbol ">" when expecting one of the following:
. ( ) , * @ % & = - + < / > at in is mod remainder not rem
<an exponent (**)> <> or != or ~= >= <= <> and or like like2
like4 likec between || multiset member submultiset
ORA-06550: line 1, column 71:
PLS-00103: Encountered the symbol ">" when expecting one of the following:
. ( ) , * @ % & = - + < / > at in is mod remainder not rem
<an exponent (**)> <> or != or ~= >= <= <> and or like like2
like4 likec between || multiset member submultiset
The problem is I don't have < or > in my procedure. The error shows when I call procedure from c# using OleDb provider. Any help with this. The procedure works fine from sql developer.

Hi Marcus ,
I did the same thing on my database based on the script you had given.
Please go through it.
SQL> create table location(location_number number, location_id number, usage_id number);
Table created.
SQL> insert into location values(10,20,30);
1 row created.
SQL> insert into location values(11,21,31);
1 row created.
SQL> create table usage( usage_number number, usage_id number);
Table created.
SQL> insert into usage values(50,30);
1 row created.
SQL> insert into usage values(60,40);
1 row created.
SQL> commit;
Commit complete.
SQL> create or replace
PROCEDURE P_GET_ALL(
p_place in number,
2 p_location out number,
3 4 p_usage out number)
5 6 is
begin
7 select loc.location_number into p_location from location loc where
8
loc.location_id=p_place;
select us.usage_number into p_usage from usage us where us.usage_id=(select
loc.usage_id from location loc where loc.location_id=p_place);
end; 9 10 11 12 13 14
15 /
Procedure created.
Hope it would help you. :)
Thanks,
Balaji K.

Need help with error: No bootable device -- insert boot disk and press any key

Hello, I need help will my laptop and the error, the message says "no bootable device ", I have tried taking out the hard drive but it still doesn't work. My laptop is a Satillite C55D-A5372. I need help with this; if you know about this ans know how to fix it please reply or email me @ [email protected]
If needed more clarifications ask me.
Thank you,
Jkmano

if you got into the bios/uefi and have determined that the hdd is being detected then that is good. At least the hdd is operating to some extent, although still may be corrupt OS or the like.
Eagle asked you what OS your using (i.e., Windows 8.1 64-bit, Windows 7 32-bit, etc.). I see that English is not your native language so we'll just have to work with that as best we can.
Did you make any changes to the operating system (OS) as a result of the link you posted, and what were they?
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

Need help with error code 150:30

need help with finding out what error code 150:30 is and how to fix it

See the following:
Error 150:30 - Error "Licensing has stopped working" | Mac OS :
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

Need help with error: XML parser failed: Error An exception occurred! Type:......

Need help with the following error.....what does it mean....28943 3086739136 XML-240304 3/7/07 7:13:23 PM |SessionNew_Job1 28943 3086739136 XML-240304 3/7/07 7:13:23 PM XML parser failed: Error <An exception occurred! Type:UnexpectedEOFException, Message:The end of input was not expected> at 28943 3086739136 XML-240304 3/7/07 7:13:23 PM line <7>, char <8> in <<?xml version="1.0" encoding="WINDOWS-1252" ?> 28943 3086739136 XML-240304 3/7/07 7:13:23 PM <DSConfigurations> 28943 3086739136 XML-240304 3/7/07 7:13:23 PM <DSConfiguration default="true" name="Configuration1"> 28943 3086739136 XML-240304 3/7/07 7:13:23 PM <case_sensitive>no</case_sensitive> 28943 3086739136 XML-240304 3/7/07 7:13:23 PM <database_type>Oracle</database_type> 28943 3086739136 XML-240304 3/7/07 7:13:23 PM <db_alias_name1>ODS_OWNER</db_alias_name1> 28943 3086739136 XML-240304 3/7/07 7:13:23 PM <db_ali>, file <>. 28943 3086739136 XML-240307 3/7/07 7:13:23 PM |SessionNew_Job1 28943 3086739136 XML-240307 3/7/07 7:13:23 PM XML parser failed: See previously displayed error message.Any help would be greatly appreciated. It's something to do with my datasource and possibly the codepage but I'm really not sure.-m 

please export your datastore as ATL and send it to support. Somehow the internal language around configurations got corrupted - never seen before.

Help with error E1611 in itunes

Similar Messages

Maybe you are looking for