Help with error message, please!

I have treated my iPod like the crown jewels in the two years I've had it. Never dropped it, doesn't have a scratch on it. Imagine my sense of betrayal when suddenly I'm getting an error message "Attempting to copy to the disk 'Jim's iPod' failed. An unknown error occurred (-69)."
This after 9.81 gigs of music has copied over, out of 19+ gigs. I have found no articles or postings relating to this error message, anywhere. Out of desperation, I followed the instructions for clearing a "1413" error message, since that one seems to be fairly prevalent and there's a lot of literature on it. But to no avail.
I have done everything I can think of to the iPod itself. Reset it, restored it, run diagnostics (the HDD Test starts but won't complete; everything else gets a pass).
I suppose at some point I may have to admit that the HD is FUBAR, but I'm not ready for that yet.
Here's a question that I probably ought to know the answer to already: I have two users listed on my computer besides "All Users" and "All Users.WINDOWS" -- not sure how that happened, but there's "Jim" and there's "Jim.DAD" (DAD being my home netword name). The music folders under "ITUNES MUSIC" under these two users are not exactly the same. One is missing some artists. The listing of iTunes music in "My Docs/My Music" is also incomplete. But the music is there; I can play it out of the iTunes library. My question is, where is iTunes getting the music files when it copies to the iPod? Could this labeling screwup be causing that error message? I know, I'm probably just in denial about the demise of my iPod, but I'm gonna look for every possible source of this **** error message before giving up. Can anyone help? Sure do appreciate it if you can.
Jim

If anyone's interested (and it doesn't appear that anyone is), the problem was solved when I unplugged a USB external hard drive and simply plugged it back in.
Doesn't say much for those Apple geniuses, IMO.

Similar Messages

Iphone 4 help with error messages please =)

When I plug it into itunes two error messages are coming up.....itunes could not connect to iphone...because an error occured while reading from the device and the second is a number 0xe8000001 any help greatly recieved

The following document might be worth a try, sharon:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting to a Windows PC

Help with error message please (xbootclasspath)

I have a 32bit system running Vista and the JRE that I did have used to work fine but then it did a few updates and I could no longer use the Java Port Forwarder for remote access to my works network.
I tried to uninstall and rollback but couldnt get it to work at all.
In efforts to ammend this as I no longer know which one did work, I have completely removed Java down to registry level and laid in a fresh install of 6u24.
Alas, when I go to open the Java Control Panel I get this message:
Java(TM) Control Panel
C:\Program Files\Java\jre6\bin\javaw.exe
-Xbootclasspath/a:"C:\Program Files\Java\jre6\bin\..\lib\deploy.jar"
-Duser.home="C:\Users\Dave" com.sun.deploy.panel.ControlPanel
OK
If I navigate to the Jre6 root and try to open javaw.exe nothing at all happens.
---------------------------------------- and try to open deploy.jar I get the following;
Java Virtual Machine Launcher
Failed to load Main-Class manifest attribute from
C:\Program Files\Java\jre6\lib\deploy.jar
If I try to navigate to the works page and attempt to log on (IE8) then it opens the Port Forwarder screen and hangs.
If anyone can shed any light onto the issue then I would be most grateful -
As I am sure I may have missed out many important pieces of info just ask!
Thanks,

See this link:
Re: Java Control Panel

Need help with error message 213:8

Need help with error message 213:8, this error message prompted after re-installing CS5.5 on the same machine (W7 Pro)
Thanks.

Hi TKA_,
Please try the solutions mentioned on following forum thread.
http://support.muse.adobe.com/thread/1305941?start=0&tstart=0
Let me know if it works?
Regards,
Sumit Singh

When ever itunes updates, it ends up coming up with error message please re-install itunes, nothing i do seems to work, help please

When ever iTunes updates, it ends up coming up with error message, iTunes did not install properly, please re-install iTunes, this is about the fourth time this has happened, end up having to take it to computer tech at a cost of $180, please help

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Please help with error message while trying to update i tunes

Errors occurred while installing the updates, if the problem persists, choose tools, download only and installing manually

When i try and download i-tunes i get a message about URBCHN1 not being a win32 command, or something similar.
... that's an unusual one.
could you possibly send us a screenshot of the error message box? for instructions, see the following user tip:
hudgie: Taking screenshots to help with problems

Please help with error message invoking external service from BPEL

Yes, I'm new to Oracle SOA Suite and BPEL Process manager. I've searched the forums, OTN, and Google and have not found any description of this error message:
"oracle.fabric.common.FabricException: Number of SOAP body elements and parts do not match in operation: <operation-name>"
Using JDeveloper 11.1.1.2.0 and WebLogic/SOA 10.3.2.0.
The BPEL process was built completely using JDeveloper's graphical tools... I haven't done any raw editing of the BPEL files yet. What types of things might I possibly be doing wrong that would cause this error to occur? Any idea what two things the server is comparing and deciding that there's a mismatch? It doesn't look like it is even attempting to invoke the external service, but bailing out before that, thinking that it's going to send bad data. Below is a bit more detail.
Also, I loaded up the WSDL (same one that I gave to JDeveloper) into SOAPUI. Then I took the payload that SOA was about to send (see below) and pasted it into SOAPUI. SOAPUI didn't complain and the target web service accepted the message and produced a "success" response. It looks like the payload is correct, so I don't know why SOA is complaining.
Thanks for any help you can offer.
=====================================================
Faulted while invoking operation "UpsertEmp" on provider "SiebelUSEmployeeIntegration".
<messages>
<input>
<UpsertEmpInput>
<part name="SiebelMessage">
<SiebelMessage>
<ns1:USEmployment>
<ns1:globalId>123456abcdef</ns1:globalId>
<ns1:employeeId>000123456</ns1:employeeId>
<ns1:effDt>1/1/2009</ns1:effDt>
<ns1:emplStatus>A</ns1:emplStatus>
<ns1:supported>N</ns1:supported>
<ns1:employed>Y</ns1:employed>
<ns1:activeStatus>Y</ns1:activeStatus>
<ns1:hrEditOnly>Y</ns1:hrEditOnly>
<ns1:paygroup/>
<ns1:statusCode/>
<ns1:origHireDate/>
<ns1:termDate/>
<ns1:latestHireDate/>
<ns1:locationCode/>
<ns1:locationDescr>Somewhere</ns1:locationDescr>
<ns1:positionCode/>
<ns1:jobCode/>
<ns1:jobDescr/>
<ns1:supervisorEmplid>000654321</ns1:supervisorEmplid>
<ns1:deptCode>ITG</ns1:deptCode>
<ns1:deptDescr>Information Technology Group</ns1:deptDescr>
<ns1:ministryCode/>
<ns1:ministryDescr>Core Services</ns1:ministryDescr>
<ns1:subministryCode/>
<ns1:subministryDescr>Information Technology Group</ns1:subministryDescr>
<ns1:wwcFreeSubFlag>N</ns1:wwcFreeSubFlag>
<ns1:lakeHartMC>1234</ns1:lakeHartMC>
<ns1:testFlag>Y</ns1:testFlag>
</ns1:USEmployment>
</SiebelMessage>
</part>
</UpsertEmpInput>
</input>
<fault>
<bpelFault>
<faultType>
<message>0</message>
</faultType>
<remoteFault>
<part name="summary">
<summary>oracle.fabric.common.FabricException: Number of SOAP body elements and parts do not match in operation: UpsertEmp</summary>
</part>
<part name="detail">
<detail>Number of SOAP body elements and parts do not match in operation: UpsertEmp</detail>
</part>
</remoteFault>
</bpelFault>
</fault>
<faultType>
<message>0</message>
</faultType>
</messages>

Welcome to BPEL. Take a moment, and write "it's a namespace issue" on a sheet of paper. Post it near your monitor. It won't always be a namespace issue, but it's usually a good thing to suspect first! Is the namespace prefix ns1: defined somewhere? Does your XML that is being sent really match what the WSDL has for input to the UpsertEmp operation? The namespaces for each element level in the XML need to match, not just the lowest level.
When problems like this get really sticky, you can use TCP tunneling (obtunnel shell?) to capture what is really being sent to the server, and compare that to what is sent from SOAPUI. That's more useful if it's a subtle header problem, but you may get better error messages if you catch the BPEL message and send it using SOAPUI.
Good Luck, Andy

Need Help with error message on the Network Systems Preferences, Please

In Systems Preference, > Network, I get the error message "Your network settings been changed by another application," with an active OK button. However, when I click the OK button, it persists and does not allow me to access the screen. The only way to end this is to force quit Systems Preferences.
Do you have any idea what is causing this freeze? I have a TimeWarner Internet connection (which I want to change to Verizon as soon as I resolve this). For a while I had Earthlink DSL which didn't work well at all. Could it be something with the not-used Earthlink or the current TimeWarner?
Any ideas about the cause and, more importantly, the solution?
Thanks,
Jeanie

My computers have not been networked, intentionally. I like having them autonomous. So I have a separate Internet connection for each. And maybe that's what I need to maintain.
In the house is a Mac Mini and the house phone with new Verizon modem. In the separate office, I have my G5 tower, which is really my main computer.
Was just on phone with Verizon Tech who did say that they do not support Mac. They made a decision not to because there are fewer of us. However, I can purchase a premium support which appears to cover such support.
I've not seen the Verizon commercials, but I expect that they are filled with hype. The one I laugh at the most on the FIOS cable video is that they call their cable user interface "intuitive."

Help with error message opening lightroom 5 on macbook?

I downloaded lightroom 5 on my macbook. i have os-lion. When I open the program and error message appears saying " error switching modules". I am missing all the options to import photos. When I try to click on lightroom preferences at the top of the screen nothing pops up. It seems like i am missing some of the options and the navigation pane. Do i need to update something else to be able to import photos and click between module pages?

55AB,
It appears the error message you have is an ink system failure error message. While it looks like your printer needs to be services there is also a thread with some suggestions out there with some results for this same issue. I have linked this thread this post. You will want to look at message 16 and 17 for what seems to be a resolution for your same printer. Hope this helps.
http://h30434.www3.hp.com/t5/Other-Printing-Questions/error-message-0xc19a0035-quot-ink-system-failu...
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Help with error message i JBuilder

Hi everyone!
Hopefully some of you can help me with a really annoying problem. Every time I compile "MyClass.java" I get the following error-message:
"MyClass.java": Error #: 750 : initialization error: com.borland.compiler.symtab.LoadError: java.io.IOException: class not found: class java.lang.Object
If anyone knows how to solve this problem, please let me know!
In advance, thanks!
JB

looks like you don't have java installed or the paths got lost because your JBuilder has no idea where java is :)

Help with error code, please.

I have compiled a small AS3 script of a bouncing basketball with sound - the volume of the sound decreasing as the bounces get smaller.
I have obviously not done something correctly in the way I have installed the sound because I get this error message " 1180: Call to possibly undefined method bounce2 "( bounce2 is the mp3 file). Without the sound the ball bounces perfectly - it is the sound that has killed it. I am a newbie and am trying to learn AS3 the hard way - by experience but am stumped here - can some one help, please? Below is my script.
// create a ball sprite
import flash.media.Sound;
var initialrotationSpeed=12;
var rotationSpeed : Number;
var initialxVel : Number=8;
var stage_width : Number=750;
ball_mc.x=80;
ball_mc.y=360;
//setup position and velocity variables
var xPos : Number=ball_mc.x;
var yPos : Number=ball_mc.y;
var xVel : Number;
var yVel : Number=0.5;
var grav ; Number=1;
var vol : Number=1;
var snd : Sound=new bounce2();
snd.play();
addEventListener(Event.ENTER_FRAME,onLoop,false,0,true);
function onLoop(evt:Event) : void {
if(ball_mc.x/stage_width));
xVel=initialxVel*(1-(ball_mc.x/stage_width));
yVel+=grav;
xPos+=xVel;
yPos+=yVel;
if(Math.abs(yPos-560)<1&&Math.abs(yVel)<1)
remove EventListener(Event.ENTER_FRAME,onLoop);
else if(yPos>560){
yPos=560;
yVel*= -.8;
xVel*= .8;
vol- =0.1;
snd.play(0,0,newSoundTransform(vol));
ball_mc.x=xPos;
ball_mc.y=yPos;
if(ball_mc.xstage.stageWidth-ball_mc.width/4||ball_mc.x<0+ball_mc.width/4){
xVel*= -1;
addEventListener(Event.ENTER_FRAME,Rotation);
function Rotation(event:Event):void {
if(ball_mc.x/stage_width<1)
ball_mc.rotation+=initialrotationSpeed*(1-ball_mc.x/stage_width);
if(ball_mc.x<700)
xVel=initialxVel*(1-(ball_mc.x/stage_width));
ball_mc.x+=xVel;
else
removeEventListener(Event.ENTER_FRAME,Rotation);

Thank you - that was it - "class" - or lack of .
I am most appreciative of your assistance
regards

New to Java and need help with error message!

I have just installed the oracle jdbc driver and am now getting the following error message when trying to use the jbdc driver instead of the jdbc:odbc wrap driver...
See com.borland.dx.dataset.DataSetException error code: BASE+47
com.borland.dx.dataset.DataSetException: Chain of 2 or more Exceptions occurred
     at com.borland.dx.dataset.DataSetException.a(Unknown Source)
     at com.borland.dx.dataset.DataSetException.throwExceptionChain(Unknown Source)
     at com.borland.dx.sql.dataset.q.a(Unknown Source)
     at com.borland.dx.sql.dataset.Database.openConnection(Unknown Source)
     at com.borland.dx.sql.dataset.Database.createPreparedStatement(Unknown Source)
     at com.borland.dx.sql.dataset.o.a(Unknown Source)
     at com.borland.dx.sql.dataset.o.d(Unknown Source)
     at com.borland.dx.sql.dataset.o.f(Unknown Source)
     at com.borland.dx.sql.dataset.QueryProvider.e(Unknown Source)
     at com.borland.dx.sql.dataset.JdbcProvider.provideData(Unknown Source)
     at com.borland.dx.dataset.StorageDataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.open(Unknown Source)
     at com.borland.dbswing.JdbTable.bindDataSet(JdbTable.java:2749)
     at com.borland.dbswing.JdbTable.setDataSet(JdbTable.java:819)
     at myframes.ClaimView.btnSQL_actionPerformed(ClaimView.java:279)
     at myframes.ClaimView_btnSQL_actionAdapter.actionPerformed(ClaimView.java:440)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
     at java.awt.Component.processMouseEvent(Component.java:5100)
     at java.awt.Component.processEvent(Component.java:4897)
     at java.awt.Container.processEvent(Container.java:1569)
     at java.awt.Component.dispatchEventImpl(Component.java:3615)
     at java.awt.Container.dispatchEventImpl(Container.java:1627)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
     at java.awt.Container.dispatchEventImpl(Container.java:1613)
     at java.awt.Window.dispatchEventImpl(Window.java:1606)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Chained exception:
javax.naming.NoInitialContextException: Need to specify class name in environment or system property, or as an applet parameter, or in an application resource file: java.naming.factory.initial
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:640)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243)
     at javax.naming.InitialContext.getURLOrDefaultInitCtx(InitialContext.java:280)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at com.borland.dx.sql.dataset.q.a(Unknown Source)
     at com.borland.dx.sql.dataset.Database.openConnection(Unknown Source)
     at com.borland.dx.sql.dataset.Database.createPreparedStatement(Unknown Source)
     at com.borland.dx.sql.dataset.o.a(Unknown Source)
     at com.borland.dx.sql.dataset.o.d(Unknown Source)
     at com.borland.dx.sql.dataset.o.f(Unknown Source)
     at com.borland.dx.sql.dataset.QueryProvider.e(Unknown Source)
     at com.borland.dx.sql.dataset.JdbcProvider.provideData(Unknown Source)
     at com.borland.dx.dataset.StorageDataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.open(Unknown Source)
     at com.borland.dbswing.JdbTable.bindDataSet(JdbTable.java:2749)
     at com.borland.dbswing.JdbTable.setDataSet(JdbTable.java:819)
     at myframes.ClaimView.btnSQL_actionPerformed(ClaimView.java:279)
     at myframes.ClaimView_btnSQL_actionAdapter.actionPerformed(ClaimView.java:440)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
     at java.awt.Component.processMouseEvent(Component.java:5100)
     at java.awt.Component.processEvent(Component.java:4897)
     at java.awt.Container.processEvent(Container.java:1569)
     at java.awt.Component.dispatchEventImpl(Component.java:3615)
     at java.awt.Container.dispatchEventImpl(Container.java:1627)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
     at java.awt.Container.dispatchEventImpl(Container.java:1613)
     at java.awt.Window.dispatchEventImpl(Window.java:1606)
     at java.awt.Component.dispatchEvent(Component.java:3477)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Here is the code causeing the error;
void btnSQL_actionPerformed(ActionEvent e)
try
String GET_DATASET = txtSQL.getText().trim();
Display("Executing...");
try
MyDisplayTable.setDataSet(null);
catch (DataSetException ex)
Display("ERROR 1: " + ex.toString());
try
queryDataSet1.close();
catch (DataSetException ex)
Display("ERROR 2: " + ex.toString());
try
queryDataSet1.setQuery(new com.borland.dx.sql.dataset.QueryDescriptor(
database1, GET_DATASET, null, true, Load.ALL));
catch (DataSetException ex)
Display("ERROR 3: " + ex.toString());
try
if (!queryDataSet1.isOpen()) {
queryDataSet1.open();
catch (DataSetException ex) {
Display("ERROR 5: " + ex.toString());
try {
queryDataSet1.refresh();
catch (Exception ex) {
Display("ERROR 5.5: " + ex.toString());
try {
Display("setDataSet");
MyDisplayTable.setDataSet(queryDataSet1);
Display("DONE setDataSet");
catch (DataSetException ex) {
Display("ERROR 6: " + ex.toString());
Display("Query: ' " + GET_DATASET.trim() + " ' was executed successfully");
catch (Exception ex)
Display(ex.toString());
Please let me know if more information is required. I am completely at a loss as to what more I need to do to get this to work using the new driver.
Thank you all in advance,
Malcolm Diaz
Application Developer
[email protected]
PlanVista Solutions Inc.
419 E.Main St.
Middletown NY 10940
845-346-2692

this is more of a jdbc question rather than an internationalization. You might be able to get more help if you post it in java programming section.

Need help with error message

I am running Photoshop elements 5.0 on Windows Vista. After downloading some pics that froze the download in the middle, I now get an error message when I try to open the organizer. Message is as follows:
Microsoft Visual C++ Runtime Library
The application has requested Runtime to termiinate it in an unusual way.
Can anyone help me with this problem.

Have you applied the 5.0.2 patch. That may help.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=3569

Novice (Ok Rookie) need help with error message

Hello all, I hope that you can help. I am getting this error
message when trying to submit registration information to the
database that I have created.
Error Executing Database Query.
[Macromedia][SequeLink JDBC Driver][ODBC
Socket][Microsoft][ODBC Microsoft Access Driver] You cannot add or
change a record because a related record is required in table
'UserTypes'.
The error occurred in
C:\CFusionMX7\wwwroot\Development\signup.cfm: line 67
65 : <cfelse>
66 : NULL
67 : </cfif>
68 : , 0
69 : , 1
SQL INSERT INTO C:\CFusionMX7\wwwroot\database\wwf2.Users
(UserName, Password, FirstName, LastName, EmailAddress, Address,
City, "State", ZipCode, "Admin", Allowed, UserTypeId) VALUES (
(param 1) , (param 2) , (param 3) , (param 4) , (param 5) , (param
6) , (param 7) , (param 8) , (param 9) , 0 , 1 , 3 )
DATASOURCE WWF2
VENDORERRORCODE -1613
SQLSTATE 23000
Here is the code for that page
Any help would be much appreciated. Thank you all so much.
Damien

quote:
Originally posted by:
DRufus
When I created the form, I used dreamweavers record insertion
wizard. could this be the issue. I'm sorry if I am not
understanding your solution.
Usage of <cfselect> is explained in the cfml reference
manual. If you don't have one, the internet does. The quickest way
to find it is to google the name of the tag, complete with angle
brackets.
I can't comment on dreamweaver's wizards because I never use
them.

Extended Program check: Need help with error messages

Hi,
I am getting the following error message several time on different internal table declarations:
"Tables with headers are no longer supported in the OO context."
This is the data declaration that it refers to:
I_ZDAILY_MVMT TYPE TABLE OF ZDAILY_MVMT WITH HEADER LINE.
Also, I am getting the following:
You cannot use the "RANGES" statement within classes. Instead, use the "DATA"
statement with the type "TYPE/LIKE RANGE OF" . . . . . . . . .
This is for the following data declaration:
RANGES: I_WERKS FOR EBAN-WERKS, "PLANT RANGE
        I_VTWEG FOR I_TVTW-VTWEG,
        I_VTWEG2 FOR I_TVTW-VTWEG,
        I_VKORG FOR I_TVKO-VKORG,
        I_AUART FOR I_TVAK-AUART.
What do I change and then how do i populate them?
Thanks,
John
Message was edited by:
        John Damion

We dont use tables with header lines any more.
Declare a work area and use it transfer the data.
e.g.
types: types_ZDAILY_MVMT TYPE standard table of TABLE OF ZDAILY_MVMT.
data: I_ZDAILY_MVMT TYPE type_ZDAILY_MVMT,
        wa_zdaily type zdaily_mvmt.
Now use this work area to move data into the table.
Regards,
Amit
Reward all helpful replies.

Help with error message, please!

Similar Messages

Maybe you are looking for