Help with "Error syncing Audio and Midi" message. How to fix?

Hi,
I'm running Logic Pro 7.1 on a G5 Dual 2.5 PowerMac. My audio interface is a Digidisign Digi002R, and my MIDI interface is a MOTU Fastlane. Up until a few days ago everything was working fine. I didn't install any new software or anything.
All of a sudden in any Logic session I open (new or saved) I get all kinds of artifacts that sound like they're associated with sample rate problems.
True to form, on playback after 4 or 5 seconds a message comes up telling me that there is an error syncing audio and midi. It tells me that a sample rate of 88209, or 88213, or 88207 (each time it's different) was detected, and that there is a conflict between Logic and my external device.
My Digi002R is set to 44.1, and Logic is set to 44.1 as well. I have no idea where this problem came from.
The only thing I do know is that I've been using the Peachtree Press Apple Pro Training Series to study for my Level 1 Logic certification. it comes with a CD with Logic sessions to use with the text. The CD comes with a Logic Epress Demo but I didn't download that as I've already got Logic Pro. I dragged those session files to my desktop, and the problem occured for the first time when iopened up that first session from the CD. After that, every single session has this problem and I have no idea how to fix it.
Sorry for the incredibly long message, but can anybody help?
Thanks
PowerBook G4 15", PowerMac G5 Dual 2.5 Mac OS X (10.4.7)

Hey,
Thanks. I appreciate the help, but I've tried all of that. I just don't get it. I've unplugged everything, I've shut down, powered down, relaunched everything a dozen times and the problem doesn't go away. I know that the problem is with Logic because the interface works perfectly fnie with everything else, from Pro Tools to iTunes.
I'm having Logic Pro 7.2 shipped to me so I'm hoping that installing that will reset everything, but until then I can't do anything in Logic.
Anybody ever encounter anything like this?

Similar Messages

File plays fine, then I get "Error Syncing Audio and Midi"

Hi, I just installed my upgrade to Logic 9 from 8. When I play a file , it goes fine at first, then if I save it, a crackling sound takes over and I get a message like "Error syncing Audio and Midi". Saving the file is not the only thing that will cause this to occur but I can't pinpoint exactly what and when these other times happen.
I did some troubleshooting with an Apple Rep by phone the other day and it seemed we had it figured out that the problem was about bringing projects over from Logic 8 and opening them in Logic 9. The suggested solution was to export audio tracks from 8 and import them into 9 as a fresh project.
It then seemed that when I started a project from scratch in Logic 9, I had no problems. This no longer seems to hold water as a theory. The problem I'm having now is with a project I started fresh in Logic 9.
When the crackling sound starts, the play speed seems to slow down as if I were playing an old 78 on the wrong speed or something.
Also I can't bounce to make an Mp3 in Real time - that causes this crackling sound/speed issue to occur as well. When I try to bounce an Mp3 offline, it re-hashes the first Mp3 I did and I don't hear my changes even as I choose to replace the file. This is screwy,...really.
I appreciate any assistance or ideas on this.
Thanks, Frank B.

I was getting the same issue last night with a stereo track and one instance of Addictive Drums with just tom fills and a few crash cymbals in the sequence. I thought it might be a AD issue because I assigned a multi instrument to AD which is not necessary but I forgot that. I deleted the multi instrument and this seems like it solved it for me. I just ran the track and no Midi Audio sync errors or the crackling sound. Do you have any multi instruments in your setup?

Error Trying to Sync Audio and MIDI - Please Help!

Hey everyone, I know this is a fairly common problem, and I've tried following the Logic Help and manual, but it hasn't solved it.
Last night, I was recording and mixing with my MOTU 828mkII into my Powerbook G4 running Logic Pro 6.4, and everything was working perfectly. Today, when I opened up Logic again to work on mixing the song I recorded last night, after not having changed a single preference anywhere, something bizarre happened. When I clicked the play button, the song began playing, but no sound came out, except for a high-pitched digital howling sound, and after about 5 seconds, an error message came up saying, "Error Trying to Sync Audio and MIDI." I tried other song files I'd recorded months ago, and even with brand new song files, and the same exact problem occurred!
Apparently, it's a discrepancy in the sample rates between my MOTU and Logic? But both have been set to 44.1 for months, and I haven't changed anything. The Logic Help said to change the Sync Mode to MTC Continuous (which I believe it was already set to) or MTC Trigger/ASD (which didn't help).
I even tried re-installing Logic altogether, and changing the sample rates both on my MOTU and Logic to 48 and then back to 44.1, and nothing works.
Please help me! What should I do?
Thanks very much,
TB

I suffered from this problem, and it was particularly frustrating to me since I was not even using MIDI, or so I thought. The "Error Trying to Sync Audio and MIDI" message seemed to crop up just as I was ready to print a final mix.
I did some research and learned that the Logic automation is actually MIDI data, furthermore, I learned that The sample accurate automation feature in Logic Audio results in randomly sized audio buffers being passed to plug-ins.
My solution?
Turn OFF "sample accurate automation" in the menu Logic Pro / Preferences / Audio...
The automation is very accurate even with this option disabled.

"Error while trying to sync Audio and Midi"

"Error while trying to sync Audio and Midi" I have been having this problem now and then for some time. Now, I can't run any audio files without a lot of popping. I tried all the suggestions on the support document for this issue. I even downloaded new drivers from Motu for my Express XT Midi interface and my 828MK11 Audio interface. There has been no change. HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP!!!!!!
Also, I have tried reseting the 828 to factory default and that does not help.
Jonathan Jenkins

Hi,
I solved my own problem by resetting the factory presets:
Follow these steps to restore the MOTU 828mkII to Factory Default Settings.
Disconnect the firewire cable from the 828mkII
Press the Setup knob
Turn the Setup knob all the way to the right
Press the Select knob
Press the Value knob
Power off the interface and plug the firewire cable back in
Power the interface back on
The same steps can be followed to restore the Factory Default Settings on a Traveler.
-Robert

Error while trying to sync audio and MIDI, sample rate 39100 recognised??

When I press record a message appears saying 'error while trying to syncronise audio and MIDI, sample rate 39100 recognised. Check conflict between garage band and external device. I'm using a Behringer UMC-202 interface. The inputs are selected as the device but no audio is present either.

Just click the icon on each track that stops it acting as a live input. It looks like a sound wave. Only have them clicked orange when using the track to record! I don't know if that will solve your problem!

Error Message "Error while trying to sync Audio and Midi"

I have been having this problem now and then for some time. Now, I can't run any audio files without a lot of popping. I tried all the suggestions on the support document for this issue. I even downloaded new drivers from Motu for my Express XT Midi interface and my 828MK11 Audio interface. There has been no change. HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP!!!!!!
Jonathan Jenkins

Sounds like the MOTU828 needs a reset, the problems you describe can almost always be fixed by a reset.
-Unplug the firewire
-press the button "setup", turn full right until
"factory default"
- push select
- confirm with "value"
- plug back firewire
pancentyer-

In Logic Pro 9.8.1 I get an "error while trying to sync Audio and MIDI"

I am using a MAC OS X 2.66 GHz Intel Core 2 Duo
and memory 4 GB 1067 MHz DDR3.
I am going thru an Apogee Ensemble
and 2 other external units, an MCU Pro Universal Control surface
and an Axiom 25.
The problem is this was working fine and now I cannot
get audio. The signals are there when I load a Logic project,
just no actual audio.

Craigius wrote:
I am using Apple Pro 9.1.8 with a Apogee Ensemble.    Eeternal MCU Pro Universal Control Surface andan Axiom 25.
Have tried the resolutions recommended and I basically have all signals in projects with no audio.
Care to share?
Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.

How can I fix an -"Error while trying to sync Audio and Midi problem?

I am using Apple Pro 9.1.8 with a Apogee Ensemble.    Eeternal MCU Pro Universal Control Surface andan Axiom 25.
Have tried the resolutions recommended and I basically have all signals in projects with no audio.

Craigius wrote:
I am using Apple Pro 9.1.8 with a Apogee Ensemble.    Eeternal MCU Pro Universal Control Surface andan Axiom 25.
Have tried the resolutions recommended and I basically have all signals in projects with no audio.
Care to share?
Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.

Need help with Roland V-drums and MIDI

Is it possible to record the Roland TD-3 internal drum sounds from the module via MIDI without using the Logic plug-ins (like Ultrabeat) etc.? I used the GM Device drums and in the environment window hooked up the multi instrument to the QuickTime Synth with success. I have also used Ultrabeat as an instrument with success. And audio cables out into audio tracks with success. So, the question is... Is it possible just to run MIDI out and use the TD-3s internal sounds?

sorry I'm not getting a few things....
1) how do I create a midi object?
you create the midi object in the midi inst layer of your environment. at the top left under the menu that says "new" select the very 1st thing in the list, "instrument" (midi instrument)
2) where do I assign the midi output?
after you create the instrument the perameters box opens on the left. you assign the port and channel there
5) where are the audio outs?
to what? the roland? doesn't it have audio output?
I've been reading the manual and have tried various
forums.... been trying to get this since last
night.... my brain. I know it's gotta be simple...
not real simple but not real hard either

Help with Error on tomcat and java servlet

i've just recently installed Dialect Payment client onto my server and is using Java to correspond with the server. I can run the diagnostic test run perfectly fine but when I have compiled the form and the app, I keep getting the error:
javax.servlet.ServletException: Invoker service() exception
     org.apache.catalina.servlets.InvokerServlet.serveRequest(InvokerServlet.java:478)
     org.apache.catalina.servlets.InvokerServlet.doPost(InvokerServlet.java:170)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     filters.ExampleFilter.doFilter(ExampleFilter.java:149)
root cause
com.qsipayments.utility.AssertionError: InvalidConfigException can only be thrown on reload
     com.qsipayments.utility.Assert.shouldNotReachHere(Assert.java:246)
     PaymentClient.util.PCConfigurationService.getConfiguration(PCConfigurationService.java:72)
     com.qsipayments.utility.logging.Logging.initialise(Logging.java:198)
     PaymentClient.PaymentClientBase.initialiseLogging(PaymentClientBase.java:1179)
     PaymentClient.PaymentClientBase.<init>(PaymentClientBase.java:106)
     PaymentClient.PaymentClientImpl.<init>(PaymentClientImpl.java:26)
     Java_3DS_3P_AuthPay_DO.doPost(Java_3DS_3P_AuthPay_DO.java:116)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     org.apache.catalina.servlets.InvokerServlet.serveRequest(InvokerServlet.java:420)
     org.apache.catalina.servlets.InvokerServlet.doPost(InvokerServlet.java:170)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     filters.ExampleFilter.doFilter(ExampleFilter.java:149)
If anyone can help or advise me on this matter, it would be incredibly fantastic! I've tried asking the people who have provided me with the program but they dont seem to have anything useful that i can do to fix the error. I was told by my server admin that it was in the coding, but they claim that it has nothing to do with the coding.
PLEASE HELP.I've been working on this for months and about to die from frustration!

I haven't worked with this vendor product, but here are some ideas you might find useful:
It appears is a configuration problem when using the vendor software (but they already told you that, didn't they!!!).
I say the above because these lines in your printout are from vendor supplied objects (that you didn't create):
com.qsipayments.utility.AssertionError: InvalidConfigException can only be thrown on reload
com.qsipayments.utility.Assert.shouldNotReachHere(Assert.java:246)
PaymentClient.util.PCConfigurationService.getConfiguration(PCConfigurationService.java:72)
I suggest creating a brand new project with the simplist use of the above vendor project and get it to work.
You can use the vendor's (on line) documentation to do this. Deploy it in production to ensure there are no deployment issues. Work closely with one of
your fellow employees (more than one pair of eyes can pick up stuff that you miss). Next, look at what features of the vendor software the originial project uses and what features the sample project uses. Try to implement a subset of functionality of the orginial project into the sample project and get that to work. Implement the next feature, test, etc. Do small experiments at a time so you can easily isolate what doesnt work.
If none of the above works for you, try contacting the manufacturer or thier support web site. If none of the above works, look into using a compeditors product.

Need help with Error Code 205 and installation

not installed on my computer the premier adorbe cs6 , code 205 appears
Message was edited by: Kevin Monahan
Reason: please enter a better title next time

Hi Gyrus,
See if this doc helps you: https://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
Thanks,
Kevin

Help with errors REP-0065 and REP-0200

Since one day I have received this errors while I run several reports.
It's very strange because since that reports had run fine. We have 2
DB instances and at one they run fine but at other I always have received
these errors (since one day).
Error says that report builder is runnin out of virtual memory but I have
256 MB RAM and I know that they used to work at weakiest PC and
they still work at the same PC when I connect to the second instance.
I haven't changed any DB parameters (if I remember) and these errors
should be report builder related not DB anyway.
I am completely clueless.
Does anyone of you have ever received these errors ?
Any help or suggestions would be greatly appreciated.
Thanx
David

Normally these two errors occur when the program runs out of memory.
You said when connect to one instance of database, the builder works fine; when connect to another instance of database, the builder gives above errors. It looks like to me it is database data related problem.
Please use sqlplus to log on to these two database instance, issue the same query as in the report, check whether both returns the same amount of data. I suspect somehow the second database instance contains substantial more data than the first instance.
Thanks,
-Shaun

I need help with speed of deleting do noy know how to fix

am not very good at this, need help, deleting button is so slow it is not working as before

Check your mails are SYNCed properly or not. otherwise reSYNC your emails and check it out.
Try in safemode also
*https://support.mozilla.org/en-US/kb/safe-mode

Error: sync audio & midi

Hi,
I've searched the forum and it seems that a lot of people are having this problem - although I haven't found a solution.
I am getting the following error message:
"Error while trying to sync audio and midi. Sample rate 42572 recognized. Check conflict between logic express and external devices".
Here's what I'm using:
Intel MacBook Pro, OS 10.4.8
M-audio Midiman 2x2
Old Yamaha Clavinova controller
When I was using a powerPC iMac, everything was fine. Now that I'm using this macbook pro (intel), I'm having this error come up every 5 seconds during playback and recording.
What can I do? Is this an Intel compatibility problem or is there something else going on?
Thanks!

Yes. I've increased buffer sizes...
I copied the file over to my power PC mac and everything is working fine. I have a feeling it's just a compatibility issue with using a power pc program on an intel mac.
I will try downloading the intel update. If anyone else has any other suggestions, please suggest!
Thanks!

Pop up saying error while trying to sync audi and midi

HELP! is there anyone who is experiencing or has experienced an error pop up saying error while trying to sync audio and midi in your logic pro8? it's doing it on every song I pull up now. I've tried buffering, reloading, Help? all was fine the night before.
Sincere, The Silver Conductor

Check the clock source on your audio interface if you're using one. It should be set to internal. What's your setup?

Help with "Error syncing Audio and Midi" message. How to fix?

Similar Messages

Maybe you are looking for